scalastyle-config.xml

<!--
  ~ Licensed to the Apache Software Foundation (ASF) under one or more
  ~ contributor license agreements.  See the NOTICE file distributed with
  ~ this work for additional information regarding copyright ownership.
  ~ The ASF licenses this file to You under the Apache License, Version 2.0
  ~ (the "License"); you may not use this file except in compliance with
  ~ the License.  You may obtain a copy of the License at
  ~
  ~   http://www.apache.org/licenses/LICENSE-2.0
  ~
  ~ Unless required by applicable law or agreed to in writing, software
  ~ distributed under the License is distributed on an "AS IS" BASIS,
  ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  ~ See the License for the specific language governing permissions and
  ~ limitations under the License.
  -->
<!--
If you wish to turn off checking for a section of code, you can put a comment in the source
before and after the section, with the following syntax:
  // scalastyle:off
  ...  // stuff that breaks the styles
  // scalastyle:on
You can also disable only one rule, by specifying its rule id, as specified in:
  http://www.scalastyle.org/rules-0.7.0.html
  // scalastyle:off no.finalize
  override def finalize(): Unit = ...
  // scalastyle:on no.finalize
This file is divided into 3 sections:
 (1) rules that we enforce.
 (2) rules that we would like to enforce, but haven't cleaned up the codebase to turn on yet
     (or we need to make the scalastyle rule more configurable).
 (3) rules that we don't want to enforce.
-->

<scalastyle>
    <name>Scalastyle standard configuration</name>

    <!-- ================================================================================ -->
    <!--                               rules we enforce                                   -->
    <!-- ================================================================================ -->

    <!--    The first few lines of each file need to match text-->
    <check level="error" class="org.scalastyle.file.HeaderMatchesChecker" enabled="true">
        <parameters>
            <parameter name="header"><![CDATA[/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */]]></parameter>
        </parameters>
    </check>

    <!--    You need Spaces before and after the plus sign-->
    <check level="error" class="org.scalastyle.scalariform.SpacesAfterPlusChecker" enabled="true"/>

    <check level="error" class="org.scalastyle.scalariform.SpacesBeforePlusChecker" enabled="true"/>

    <!--    Check that there are no Spaces at the end of the line-->
    <check level="error" class="org.scalastyle.file.WhitespaceEndOfLineChecker" enabled="true"/>

    <check level="error" class="org.scalastyle.file.FileLineLengthChecker" enabled="true">
        <parameters>
            <parameter name="maxLineLength">1000</parameter>
            <parameter name="tabSize"><![CDATA[2]]></parameter>
            <parameter name="ignoreImports">true</parameter>
        </parameters>
    </check>

    <check level="error" class="org.scalastyle.scalariform.ClassNamesChecker" enabled="true">
        <parameters>
            <parameter name="regex"><![CDATA[[A-Z][A-Za-z]*]]></parameter>
        </parameters>
    </check>

    <!--    The number of method parameters cannot exceed a certain value-->
    <check customId="argcount" level="error" class="org.scalastyle.scalariform.ParameterNumberChecker" enabled="true">
        <parameters>
            <parameter name="maxParameters"><![CDATA[8]]></parameter>
        </parameters>
    </check>

    <!--    Can't use Finalize ()-->
    <check level="error" class="org.scalastyle.scalariform.NoFinalizeChecker" enabled="true"/>

    <check level="error" class="org.scalastyle.scalariform.CovariantEqualsChecker" enabled="true"/>

    <!--    The long literal needs to be followed by L-->
    <check level="error" class="org.scalastyle.scalariform.UppercaseLChecker" enabled="true"/>

    <!--    'If' statements require braces to allow single or double lines to be written-->
    <check level="error" class="org.scalastyle.scalariform.IfBraceChecker" enabled="true">
        <parameters>
            <parameter name="singleLineAllowed"><![CDATA[true]]></parameter>
            <parameter name="doubleLineAllowed"><![CDATA[true]]></parameter>
        </parameters>
    </check>

    <!-- Cyclomatic complexity of a method-->
    <check level="error" class="org.scalastyle.scalariform.CyclomaticComplexityChecker" enabled="true">
        <parameters>
            <parameter name="maximum">25</parameter>
        </parameters>
    </check>

    <!--    You can't have Spaces after the open parenthesis, there are a lot of places in the code-->
    <check enabled="true" class="org.scalastyle.scalariform.DisallowSpaceAfterTokenChecker" level="error">
        <parameters>
            <parameter name="tokens">LPAREN</parameter>
        </parameters>
    </check>

    <!-- Methods cannot exceed the maximum number of rows -->
    <check level="warning" class="org.scalastyle.scalariform.MethodLengthChecker" enabled="true">
        <parameters>
            <parameter name="maxLength">500</parameter>
            <parameter name="ignoreComments">false</parameter>
        </parameters>
    </check>

    <!--    Method requires an explicit return type-->
    <check level="error" class="org.scalastyle.scalariform.PublicMethodsHaveTypeChecker" enabled="true"/>

    <check enabled="true" class="org.scalastyle.scalariform.RedundantIfChecker" level="warning"/>

    <!--    Check that file ends with a newline character-->
    <check level="error" class="org.scalastyle.file.NewLineAtEofChecker" enabled="true"/>

    <!--    Non-ascii characters cannot be used-->
    <check customId="nonascii" level="error" class="org.scalastyle.scalariform.NonASCIICharacterChecker"
           enabled="true"/>

    <!--    Comments need to start with a space-->
    <check level="warning" class="org.scalastyle.scalariform.SpaceAfterCommentStartChecker" enabled="true"/>

    <!--    You must have a space before checking these markers-->
    <check level="error" class="org.scalastyle.scalariform.EnsureSingleSpaceBeforeTokenChecker" enabled="true">
        <parameters>
            <parameter name="tokens">ARROW, EQUALS, ELSE, TRY, CATCH, FINALLY, LARROW, RARROW</parameter>
        </parameters>
    </check>

    <!--    Check that these markers must be followed by Spaces-->
    <check level="error" class="org.scalastyle.scalariform.EnsureSingleSpaceAfterTokenChecker" enabled="true">
        <parameters>
            <parameter name="tokens">ARROW, EQUALS, COMMA, COLON, IF, ELSE, DO, WHILE, FOR, MATCH, TRY, CATCH, FINALLY,
                LARROW, RARROW
            </parameter>
        </parameters>
    </check>

    <!--   The class field must start with a lowercase case and the object field must start with a uppercase case-->
    <check enabled="true" class="org.scalastyle.scalariform.FieldNamesChecker" level="warning">
        <parameters>
            <parameter name="regex">^[a-z][A-Za-z0-9]*$</parameter>
            <parameter name="objectFieldRegex">^[A-Z][A-Za-z0-9]*$</parameter>
        </parameters>
    </check>

    <!--    The same string literal cannot appear more than once in a file-->
    <check enabled="true" class="org.scalastyle.scalariform.MultipleStringLiteralsChecker" level="warning">
        <parameters>
            <parameter name="allowed">1</parameter>
            <parameter name="ignoreRegex">^\&quot;\&quot;$</parameter>
        </parameters>
    </check>

    <!--    Method parameter name is regular or not: starts with a lowercase letter-->
    <check enabled="true" class="org.scalastyle.scalariform.MethodArgumentNamesChecker" level="warning">
        <parameters>
            <parameter name="regex">^[a-z][A-Za-z0-9]*$</parameter>
            <parameter name="ignoreRegex">^$</parameter>
        </parameters>
    </check>

    <!-- Equals () and hashCode() need to be implemented at the same time-->
    <check level="error" class="org.scalastyle.scalariform.EqualsHashCodeChecker" enabled="true"/>

    <!-- Do not use the java@override annotation-->
    <check level="error" class="org.scalastyle.scalariform.OverrideJavaChecker" enabled="true"/>

    <!-- Cannot use?? symbol -->
    <check level="error" class="org.scalastyle.scalariform.NotImplementedErrorUsage" enabled="true"/>

    <!--    Comma, no space before the closing parenthesis-->
    <check level="error" class="org.scalastyle.scalariform.DisallowSpaceBeforeTokenChecker" enabled="true">
        <parameters>
            <parameter name="tokens">COMMA, RPAREN</parameter>
        </parameters>
    </check>

    <!-- ================================================================================ -->
    <!--                              Custom checker                               -->
    <!-- ================================================================================ -->

    <check customId="println" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">println</parameter>
        </parameters>
        <customMessage><![CDATA[Are you sure you want to println? if yes, wrap the code block with
      // scalastyle:off println
      println(...)
      // scalastyle:on println]]></customMessage>
    </check>

    <check customId="javaconversions" level="error" class="org.scalastyle.scalariform.TokenChecker" enabled="true">
        <parameters>
            <parameter name="regex">JavaConversions</parameter>
        </parameters>
        <customMessage>Instead of importing implicits in scala.collection.JavaConversions._, import
            scala.collection.JavaConverters._ and use .asScala / .asJava methods
        </customMessage>
    </check>

    <check customId="hadoopconfiguration" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">spark(.sqlContext)?.sparkContext.hadoopConfiguration</parameter>
        </parameters>
        <customMessage><![CDATA[
      Are you sure that you want to use sparkContext.hadoopConfiguration? In most cases, you should use
      spark.sessionState.newHadoopConf() instead, so that the hadoop configurations specified in Spark session
      configuration will come into effect.
      If you must use sparkContext.hadoopConfiguration, wrap the code block with
      // scalastyle:off hadoopconfiguration
      spark.sparkContext.hadoopConfiguration...
      // scalastyle:on hadoopconfiguration
    ]]></customMessage>
    </check>

    <check customId="runtimeaddshutdownhook" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">Runtime\.getRuntime\.addShutdownHook</parameter>
        </parameters>
        <customMessage><![CDATA[
      Are you sure that you want to use Runtime.getRuntime.addShutdownHook? In most cases, you should use
      ShutdownHookManager.addShutdownHook instead.
      If you must use Runtime.getRuntime.addShutdownHook, wrap the code block with
      // scalastyle:off runtimeaddshutdownhook
      Runtime.getRuntime.addShutdownHook(...)
      // scalastyle:on runtimeaddshutdownhook
    ]]></customMessage>
    </check>

    <check customId="awaitresult" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">Await\.result</parameter>
        </parameters>
        <customMessage><![CDATA[
      Are you sure that you want to use Await.result? In most cases, you should use ThreadUtils.awaitResult instead.
      If you must use Await.result, wrap the code block with
      // scalastyle:off awaitresult
      Await.result(...)
      // scalastyle:on awaitresult
    ]]></customMessage>
    </check>

    <check customId="awaitready" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">Await\.ready</parameter>
        </parameters>
        <customMessage><![CDATA[
      Are you sure that you want to use Await.ready? In most cases, you should use ThreadUtils.awaitReady instead.
      If you must use Await.ready, wrap the code block with
      // scalastyle:off awaitready
      Await.ready(...)
      // scalastyle:on awaitready
    ]]></customMessage>
    </check>

    <check customId="throwerror" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">throw new \w+Error\(</parameter>
        </parameters>
        <customMessage><![CDATA[
      Are you sure that you want to throw Error? In most cases, you should use appropriate Exception instead.
      If you must throw Error, wrap the code block with
      // scalastyle:off throwerror
      throw new XXXError(...)
      // scalastyle:on throwerror
    ]]></customMessage>
    </check>

    <check customId="commonslang2" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">org\.apache\.commons\.lang\.</parameter>
        </parameters>
        <customMessage>Use Commons Lang 3 classes (package org.apache.commons.lang3.*) instead
            of Commons Lang 2 (package org.apache.commons.lang.*)
        </customMessage>
    </check>

    <check customId="FileSystemGet" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">FileSystem.get\([a-zA-Z_$][a-zA-Z_$0-9]*\)</parameter>
        </parameters>
        <customMessage><![CDATA[
      Are you sure that you want to use "FileSystem.get(Configuration conf)"? If the input
      configuration is not set properly, a default FileSystem instance will be returned. It can
      lead to errors when you deal with multiple file systems. Please consider using
      "FileSystem.get(URI uri, Configuration conf)" or "Path.getFileSystem(Configuration conf)" instead.
      If you must use the method "FileSystem.get(Configuration conf)", wrap the code block with
      // scalastyle:off FileSystemGet
      FileSystem.get(...)
      // scalastyle:on FileSystemGet
    ]]></customMessage>
    </check>

    <check customId="SingleSpaceBetweenRParenAndLCurlyBrace" level="error" class="org.scalastyle.file.RegexChecker"
           enabled="true">
        <parameters>
            <parameter name="regex">\)\{</parameter>
        </parameters>
        <customMessage><![CDATA[
      Single Space between ')' and `{`.
    ]]></customMessage>
    </check>

    <check customId="NoScalaDoc" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">(?m)^(\s*)/[*][*].*$(\r|)\n^\1 [*]</parameter>
        </parameters>
        <customMessage>Use Javadoc style indentation for multiline comments</customMessage>
    </check>

    <check customId="GuavaToStringHelper" level="error" class="org.scalastyle.file.RegexChecker" enabled="true">
        <parameters>
            <parameter name="regex">Objects.toStringHelper</parameter>
        </parameters>
        <customMessage>Avoid using Object.toStringHelper. Use ToStringBuilder instead.</customMessage>
    </check>


    <!-- ================================================================================ -->
    <!--                               rules we don't want                                -->
    <!-- ================================================================================ -->

    <!-- We cannot turn the following two on, because it'd fail a lot of string interpolation use cases. -->
    <!-- Ideally the following two rules should be configurable to rule out string interpolation. -->
    <check level="error" class="org.scalastyle.scalariform.NoWhitespaceBeforeLeftBracketChecker" enabled="false"/>

    <check level="error" class="org.scalastyle.scalariform.NoWhitespaceAfterLeftBracketChecker" enabled="false"/>

    <!-- This breaks symbolic method names so we don't turn it on. -->
    <!-- Maybe we should update it to allow basic symbolic names, and then we are good to go. -->
    <check level="error" class="org.scalastyle.scalariform.MethodNamesChecker" enabled="false">
        <parameters>
            <parameter name="regex"><![CDATA[^[a-z][A-Za-z0-9]*$]]></parameter>
        </parameters>
    </check>

    <check level="error" class="org.scalastyle.scalariform.DeprecatedJavaChecker" enabled="false"/>

    <check level="error" class="org.scalastyle.scalariform.IllegalImportsChecker" enabled="false">
        <parameters>
            <parameter name="illegalImports"><![CDATA[scala.collection.Seq,scala.collection.IndexedSeq]]></parameter>
        </parameters>
        <customMessage><![CDATA[
      Don't import scala.collection.Seq and scala.collection.IndexedSeq as it may bring some problems with cross-build between Scala 2.12 and 2.13.
      Please refer below page to see the details of changes around Seq / IndexedSeq.
      https://docs.scala-lang.org/overviews/core/collections-migration-213.html
      If you really need to use scala.collection.Seq or scala.collection.IndexedSeq, please use the fully-qualified name instead.
    ]]></customMessage>
    </check>

    <check enabled="false" class="org.scalastyle.scalariform.NamedArgumentChecker" level="warning">
        <parameters>
            <parameter name="checkString">false</parameter>
            <parameter name="ignoreMethod">^set.+$</parameter>
        </parameters>
    </check>

    <check level="error" class="org.scalastyle.scalariform.IllegalImportsChecker" enabled="false">
        <parameters>
            <parameter name="illegalImports"><![CDATA[sun._,java.awt._]]></parameter>
        </parameters>
    </check>

    <!-- We want the opposite of this: NewLineAtEofChecker -->
    <check level="error" class="org.scalastyle.file.NoNewLineAtEofChecker" enabled="false"/>

    <!-- This one complains about all kinds of random things. Disable. -->
    <check level="error" class="org.scalastyle.scalariform.SimplifyBooleanExpressionChecker" enabled="false"/>

    <!-- We use return quite a bit for control flows and guards -->
    <check level="error" class="org.scalastyle.scalariform.ReturnChecker" enabled="false"/>

    <!-- We use null a lot in low level code and to interface with 3rd party code -->
    <check level="error" class="org.scalastyle.scalariform.NullChecker" enabled="false"/>

    <!-- Doesn't seem super big deal here ... -->
    <check level="error" class="org.scalastyle.scalariform.NoCloneChecker" enabled="false"/>

    <!-- Doesn't seem super big deal here ... -->
    <check level="error" class="org.scalastyle.file.FileLengthChecker" enabled="false">
        <parameters>
            <parameter name="maxFileLength">800></parameter>
        </parameters>
    </check>

    <check enabled="false" class="org.scalastyle.scalariform.ScalaDocChecker" level="warning">
        <parameters>
            <parameter name="ignoreRegex">(.*Spec$)|(.*SpecIT$)</parameter>
            <parameter name="ignoreTokenTypes">PatDefOrDcl,TypeDefOrDcl,FunDefOrDcl,TmplDef</parameter>
            <parameter name="ignoreOverride">false</parameter>
            <parameter name="indentStyle">anydoc</parameter>
        </parameters>
    </check>

    <!-- Doesn't seem super big deal here ... -->
    <check level="error" class="org.scalastyle.scalariform.NumberOfTypesChecker" enabled="false">
        <parameters>
            <parameter name="maxTypes">30</parameter>
        </parameters>
    </check>

    <!-- Not exactly feasible to enforce this right now. -->
    <!-- It is also infrequent that somebody introduces a new class with a lot of methods. -->
    <check level="error" class="org.scalastyle.scalariform.NumberOfMethodsInTypeChecker" enabled="false">
        <parameters>
            <parameter name="maxMethods"><![CDATA[30]]></parameter>
        </parameters>
    </check>

    <!-- Doesn't seem super big deal here, and we have a lot of magic numbers ... -->
    <check level="error" class="org.scalastyle.scalariform.MagicNumberChecker" enabled="false">
        <parameters>
            <parameter name="ignore">-1,0,1,2,3</parameter>
        </parameters>
    </check>

    <check level="error" class="org.scalastyle.file.FileTabChecker" enabled="false"/>

    <check enabled="false" class="org.scalastyle.scalariform.VarFieldChecker" level="error"/>

    <check enabled="false" class="org.scalastyle.scalariform.VarLocalChecker" level="warning"/>

    <check enabled="false" class="org.scalastyle.scalariform.WhileChecker" level="warning"/>

    <check enabled="false" class="org.scalastyle.scalariform.XmlLiteralChecker" level="warning"/>

    <check enabled="false" class="org.scalastyle.scalariform.TodoCommentChecker" level="warning">
        <parameters>
            <parameter default="TODO|FIXME" type="string" name="words"/>
        </parameters>
    </check>

    <check enabled="false" class="org.scalastyle.scalariform.ClassTypeParameterChecker" level="error">
        <parameters>
            <parameter name="regex">^[A-Z_]$</parameter>
        </parameters>
    </check>

    <check enabled="false" level="warning" class="org.scalastyle.scalariform.EmptyInterpolatedStringChecker"/>

    <check enabled="false" class="org.scalastyle.scalariform.EmptyClassChecker" level="warning"/>

    <check level="error" class="org.scalastyle.scalariform.ObjectNamesChecker" enabled="false">
        <parameters>
            <parameter name="regex"><![CDATA[(config|[A-Z][A-Za-z]*)]]></parameter>
        </parameters>
    </check>

    <check enabled="false" class="org.scalastyle.scalariform.PackageNamesChecker" level="warning">
        <parameters>
            <parameter name="regex">^[a-z][A-Za-z]*$</parameter>
        </parameters>
    </check>

    <check level="error" class="org.scalastyle.scalariform.PackageObjectNamesChecker" enabled="false">
        <parameters>
            <parameter name="regex"><![CDATA[^[a-z][A-Za-z]*$]]></parameter>
        </parameters>
    </check>

    <check enabled="false" class="org.scalastyle.scalariform.PatternMatchAlignChecker" level="warning"/>

    <check enabled="false" class="org.scalastyle.scalariform.ProcedureDeclarationChecker" level="warning"/>

    <check level="error" class="org.scalastyle.scalariform.StructuralTypeChecker" enabled="false"/>

    <check enabled="false" class="org.scalastyle.scalariform.UnderscoreImportChecker" level="warning">
        <parameters>
            <parameter name="ignoreRegex">collection\.JavaConverters\._|scala\.concurrent\.duration\._</parameter>
        </parameters>
    </check>

    <check enabled="false" class="org.scalastyle.scalariform.BlockImportChecker" level="warning"/>

    <check enabled="false" class="org.scalastyle.scalariform.ImportGroupingChecker" level="warning"/>

    <check level="error" class="org.scalastyle.scalariform.ImportOrderChecker" enabled="false">
        <parameters>
            <parameter name="groups">java,scala,3rdParty,linkis</parameter>
            <parameter name="group.java">javax?\..*</parameter>
            <parameter name="group.scala">scala\..*</parameter>
            <parameter name="group.3rdParty">(?!org\.apache\.linkis\.).*</parameter>
            <parameter name="group.linkis">org\.apache\.linkis\..*</parameter>
        </parameters>
    </check>

    <check enabled="false" class="org.scalastyle.scalariform.LowercasePatternMatchChecker" level="warning"/>

</scalastyle>