diff --git a/docs/audio_driver.md b/docs/audio_driver.md
index 7bce6c2d9bd7..03c0a824dfe7 100644
--- a/docs/audio_driver.md
+++ b/docs/audio_driver.md
@@ -199,6 +199,11 @@ with all this information, the configuration would contain these lines:
 ChibiOS uses GPIOv1 for the F103, which only knows of one alternate function.
 On 'larger' STM32s, GPIOv2 or GPIOv3 are used; with them it is also necessary to configure `AUDIO_PWM_PAL_MODE` to the correct alternate function for the selected pin, timer and timer-channel.
 
+You can also use the Complementary output (`TIMx_CHyN`) for PWM on supported controllers.  To enable this functionality, you will need to make the following changes:
+```c
+// config.h:
+#define AUDIO_PWM_COMPLEMENTARY_OUTPUT
+```
 
 ### PWM software :id=pwm-software
 
diff --git a/platforms/chibios/drivers/audio_pwm_hardware.c b/platforms/chibios/drivers/audio_pwm_hardware.c
index 40d891326fd5..21b5c6892cdb 100644
--- a/platforms/chibios/drivers/audio_pwm_hardware.c
+++ b/platforms/chibios/drivers/audio_pwm_hardware.c
@@ -22,6 +22,12 @@
 #    define AUDIO_PWM_COUNTER_FREQUENCY 100000
 #endif
 
+#ifndef AUDIO_PWM_COMPLEMENTARY_OUTPUT
+#    define AUDIO_PWM_OUTPUT_MODE PWM_OUTPUT_ACTIVE_HIGH
+#else
+#    define AUDIO_PWM_OUTPUT_MODE PWM_COMPLEMENTARY_OUTPUT_ACTIVE_HIGH
+#endif
+
 extern bool    playing_note;
 extern bool    playing_melody;
 extern uint8_t note_timbre;
@@ -29,7 +35,7 @@ extern uint8_t note_timbre;
 static PWMConfig pwmCFG = {.frequency = AUDIO_PWM_COUNTER_FREQUENCY, /* PWM clock frequency  */
                            .period    = 2,
                            .callback  = NULL,
-                           .channels  = {[(AUDIO_PWM_CHANNEL - 1)] = {.mode = PWM_OUTPUT_ACTIVE_HIGH, .callback = NULL}}};
+                           .channels  = {[(AUDIO_PWM_CHANNEL - 1)] = {.mode = AUDIO_PWM_OUTPUT_MODE, .callback = NULL}}};
 
 static float channel_1_frequency = 0.0f;