usb-device: Allow signaling capability of remote_wakeup.

To use this feature you need to create a usb device signaling remote wakeup
and then enable remote wakeup on the host (on linux write enabled to
/sys/bus/usb/devices/<device>/power/wakeup). Then you can wake up the host
when is on standby using USBDevice.remote_wakeup.

Signed-off-by: Felix Dörre <felix@dogcraft.de>

micropython/usb/usb-device/manifest.py

@@ -1,2 +1,2 @@
-metadata(version="0.1.1")
+metadata(version="0.2.0")
 package("usb")

micropython/usb/usb-device/usb/device/core.py

@@ -110,6 +110,7 @@ def config(  # noqa: PLR0913
         device_protocol=0,
         config_str=None,
         max_power_ma=None,
+        remote_wakeup=False,
     ):
         # Configure the USB device with a set of interfaces, and optionally reconfiguring the
         # device and configuration descriptor fields
@@ -199,7 +200,7 @@ def maybe_set(value, idx):
         bmAttributes = (
             (1 << 7)  # Reserved
             | (0 if max_power_ma else (1 << 6))  # Self-Powered
-            # Remote Wakeup not currently supported
+            | ((1 << 5) if remote_wakeup else 0)
         )
 
         # Configuration string is optional but supported