diff --git a/src/view/components/toolbar/clue/ClueSensorProperties.tsx b/src/view/components/toolbar/clue/ClueSensorProperties.tsx
index 7aaf17a27..fc058559e 100644
--- a/src/view/components/toolbar/clue/ClueSensorProperties.tsx
+++ b/src/view/components/toolbar/clue/ClueSensorProperties.tsx
@@ -61,13 +61,13 @@ export const CLUE__PROXIMITY_PROPERTIES: ISensorProps = {
         {
             axisLabel: "P",
             maxLabel: "Max",
-            maxValue: 100,
+            maxValue: 255,
             minLabel: "Min",
             minValue: 0,
             type: SENSOR_LIST.PROXIMITY,
         },
     ],
-    unitLabel: "%",
+    unitLabel: "",
 };
 export const CLUE_PRESSURE_PROPERTIES: ISensorProps = {
     LABEL: "Humidity Sensor",
@@ -75,11 +75,11 @@ export const CLUE_PRESSURE_PROPERTIES: ISensorProps = {
         {
             axisLabel: "P",
             maxLabel: "Max",
-            maxValue: 100,
+            maxValue: 1100,
             minLabel: "Min",
-            minValue: 0,
+            minValue: 800,
             type: SENSOR_LIST.PRESSURE,
         },
     ],
-    unitLabel: "%",
+    unitLabel: "hPa",
 };
diff --git a/src/view/translations/en.json b/src/view/translations/en.json
index 038aae9ad..3d54e3927 100644
--- a/src/view/translations/en.json
+++ b/src/view/translations/en.json
@@ -31,7 +31,7 @@
     "toolbar-speaker.tryItDescription": "Right now the tones are not supported on the simulator. If you would like to see tones implemented, please +1 the feature addition issue on GitHub! Regardless, you can play it on your device!",
     "toolbar-temperature-sensor.description": "This sensor uses an NTC thermistor to sense temperature an calculate it with the analog voltage on analog pin #A9.",
     "toolbar-temperature-sensor.title": "Temperature Sensor",
-    "toolbar-temperature-sensor.tryItDescription": "You can set the temperature range from your code!",
+    "toolbar-temperature-sensor.tryItDescription": "You can set the temperature in degrees Celsius.",
     "toolbar-accelerometer-sensor.title": "Accelerometer",
     "toolbar-accelerometer-sensor.description": "An accelerometer measures the acceleration of your micro:bit; this component senses when the micro:bit is moved.",
     "toolbar-accelerometer-sensor.tryItDescription": "Set the acceleration with the sliders.",
@@ -76,16 +76,16 @@
     "toolbar-clue-sound-sensor.tryItDescription": "If you would like to see this sensor supported, please +1 the feature addition issue on GitHub!",
     "toolbar-clue-pressure-sensor.title": "Pressure",
     "toolbar-clue-pressure-sensor.description": "CLUE uses the BMP280 sensor for barometric pressure. Because pressure changes with altitude, and the pressure measurements are so good, you can also use it as an altimeter with  ±1 meter accuracy.",
-    "toolbar-clue-pressure-sensor.tryItDescription": "You can set the pressure here.",
+    "toolbar-clue-pressure-sensor.tryItDescription": "You can set the pressure here in hectoPascals (hPa).",
     "toolbar-clue-humidity-sensor.title": "Humidity",
     "toolbar-clue-humidity-sensor.description": "The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses.",
-    "toolbar-clue-humidity-sensor.tryItDescription": "You can set the humidity % here.",
+    "toolbar-clue-humidity-sensor.tryItDescription": "You can set the humidity in percentage (%) here.",
     "toolbar-clue-gesture-sensor.title": "Gesture",
     "toolbar-clue-gesture-sensor.description": "The gesture sensor can detect directional gestures (left to right, right to left, up to down, down to up), but in theory more complicated gestures like zig-zag, clockwise or counterclockwise circle, near to far, etc. could also be detected with additional code. ",
     "toolbar-clue-gesture-sensor.tryItDescription": "Select a gesture and send it by clicking the button.",
     "toolbar-clue-proximity-sensor.title": "Proximity",
     "toolbar-clue-proximity-sensor.description": "The proximity sensor uses APDS9960 and is able to return how close an object is to the front of the sensor.",
-    "toolbar-clue-proximity-sensor.tryItDescription": "You can set the proximity here.",
+    "toolbar-clue-proximity-sensor.tryItDescription": "Set relative proximity to the sensor in values from 0 - 255",
     "toolbar-clue-bluetooth.title": "Bluetooth",
     "toolbar-clue-bluetooth.description": "You can transmit data over Bluetooth to a computer or mobile device for data plotting and logging, or save it to the built in storage.",
     "toolbar-clue-bluetooth.tryItDescription": "If you would like to see this sensor supported, please +1 the feature addition issue on GitHub! ",