-
Notifications
You must be signed in to change notification settings - Fork 104
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Compatible with Sonoff RF Bridge #67
Comments
It should, but I have not tested personally. Worst case it will need to be flashed by serial anyway. Please let me know/update the Wiki if it does work. Cheers. |
I'm trying to do this right now.
|
Did you get this working? Im wanting to do the same. |
Just to say, I'm just doing a Sonoff RF Bridge OTA installation now. In order to get the ITEAD-XXXXXX wifi network to appear, I needed to follow the advice in the wiki. Specifically:
With my python 3 environment (provisioned from conda-forge) and pip install of requirements file, I was able to get to the FinalStage:
Sadly, I didn't ever get any download logs, nor did the FinalStage SSID appear. I'm going to move on to programming serially. |
I m stuck here. No final stage ssid.. @oglodyte, can you advice? I found you claim sonoff rf works |
@tyjtyj as you can see from this thread, looks like few of us having problem flashing RF Bridge or B1 with SonOTA. Might be that latest Sonoff firmware is checking for valid certificate. I used to flash B1 earlier successfully, but no success with recent RF Bridge I got. |
Can confirm that i am also having the following error on Sonoff RF with Firmware 1.60:
|
@EliasKotlyar Can you upload the full logs and show the full error, that looks more like a OS type issue than a Sonoff side issuea. |
Here is my log ..............................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................Current IPs: []
*** IMPORTANT! *** |
Has this been resolved? I'm having same issue - pass Stage 2, then never get to final stage. |
Same here flashing Touch T1
I have successfully flashed five 2-channel and two 3-channel. I'm getting this error when I try to flash two 1-channels. I'm half OK to accept that this indicates the Sonoff is checking the cert (although a better error would be nice). On the other hand, I do seem to recall that I saw this error a couple of times on the 2-channels and eventually it worked OK. |
still does not work for a RF bridge :( |
Looks like this might be due to the following issue in tornado: tornadoweb/tornado#2504 |
Some testing using other hosts on the same network seem to indicate that the RF bridge never attempts to make a connection to the webserver on the SONOTA system Testing meaning that I can connect from other hosts and it's logged - it really does look like SONOTA is simply waiting forever for a connection that never comes. |
Although I didn’t find it on the Wiki, I was wondering if this update method is compatible with the Sonoff RF bridge (https://www.itead.cc/wiki/Sonoff_RF_Bridge_433).
Thanks in advance for any insights.
The text was updated successfully, but these errors were encountered: