# ADF

# Used in frequency keypad to display current ADF settings.
# ADF1 is used in the Radio Stack page.

[Adf1ActiveFrequency]
CategoryId = Communication
Name = "ADF1 Active Frequency"
SimVarName = "ADF ACTIVE FREQUENCY:1"
Unit = "KHz"
StringFormat = "0000.#"

[Adf1StandbyFrequency]
CategoryId = Communication
Name = "ADF1 Standby Frequency"
SimVarName = "ADF STANDBY FREQUENCY:1"
Unit = "KHz"
StringFormat = "0000.#"

[Adf2ActiveFrequency]
CategoryId = Communication
Name = "ADF2 Active Frequency"
SimVarName = "ADF ACTIVE FREQUENCY:2"
Unit = "KHz"
StringFormat = "0000.#"

[Adf2StandbyFrequency]
CategoryId = Communication
Name = "ADF2 Standby Frequency"
SimVarName = "ADF STANDBY FREQUENCY:2"
Unit = "KHz"
StringFormat = "0000.#"

# Used on Radio Stack page

[Adf1SoundState]
CategoryId = Communication
Name = "ADF1 audio enabled (0/1)"
SimVarName = "ADF SOUND:1"
Unit = Bool

[Adf1Ident]
CategoryId = Communication
Name = "ADF1 Active Frequency ICAO code"
SimVarName = "ADF IDENT:1"
Unit = "string"

[Adf1Name]
CategoryId = Communication
Name = "ADF1 Active Frequency Name"
SimVarName = "ADF NAME:1"
Unit = "string"

# Not used anywhere

; [Adf2Ident]
; CategoryId = Communication
; Name = "ADF2 Active Frequency ICAO code"
; SimVarName = "ADF IDENT:2"
; Unit = "string"

; [Adf2Name]
; CategoryId = Communication
; Name = "ADF2 Active Frequency Name"
; SimVarName = "ADF NAME:2"
; Unit = "string"


# COM

# Optional COM3 frequencies for frequency keypad

; [Com3ActiveFrequency]
; CategoryId = Communication
; Name = "COM3 Active Frequency"
; SimVarName = "COM ACTIVE FREQUENCY:3"
; Unit = "MHz"
; StringFormat = "000.000"
; DeltaEpsilon = 0.0009

; [Com3StandbyFrequency]
; CategoryId = Communication
; Name = "COM3 Standby Frequency"
; SimVarName = "COM STANDBY FREQUENCY:3"
; Unit = "MHz"
; StringFormat = "000.000"
; DeltaEpsilon = 0.0009

# Used on Radio Stack

[Com1TransmitState]
CategoryId = Communication
Name = "COM1 selected for transmit (0/1)"
SimVarName = "COM TRANSMIT:1"
Unit = Bool

[Com1RcvState]
CategoryId = Communication
Name = "COM1 selected for receive (0/1)"
SimVarName = "COM RECEIVE:1"
Unit = Bool

[Com1ActiveFreqIdent]
CategoryId = Communication
Name = "COM1 Active Frequency IICAO code"
SimVarName = "COM ACTIVE FREQ IDENT:1"
Unit = "string"

[Com1ActiveFreqType]
CategoryId = Communication
Name = "COM1 Active Frequency Type (string)"
SimVarName = "COM ACTIVE FREQ TYPE:1"
Unit = "string"

[Com1StandbyFreqIdent]
CategoryId = Communication
Name = "COM1 Standby Frequency ICAO code"
SimVarName = "COM STANDBY FREQ IDENT:1"
Unit = "string"

[Com1StandbyFreqType]
CategoryId = Communication
Name = "COM1 Standby Frequency Type (string)"
SimVarName = "COM STANDBY FREQ TYPE:1"
Unit = "string"

[Com2TransmitState]
CategoryId = Communication
Name = "COM2 selected for transmit (0/1)"
SimVarName = "COM TRANSMIT:2"
Unit = Bool

[Com2RcvState]
CategoryId = Communication
Name = "COM2 selected for receive (0/1)"
SimVarName = "COM RECEIVE:2"
Unit = Bool

[Com2ActiveFreqIdent]
CategoryId = Communication
Name = "COM2 Active Frequency ICAO code"
SimVarName = "COM ACTIVE FREQ IDENT:2"
Unit = "string"

[Com2ActiveFreqType]
CategoryId = Communication
Name = "COM2 Active Frequency Type (string)"
SimVarName = "COM ACTIVE FREQ TYPE:2"
Unit = "string"

[Com2StandbyFreqIdent]
CategoryId = Communication
Name = "COM2 Standby Frequency ICAO code"
SimVarName = "COM STANDBY FREQ IDENT:2"
Unit = "string"

[Com2StandbyFreqType]
CategoryId = Communication
Name = "COM2 Standby Frequency Type (string)"
SimVarName = "COM STANDBY FREQ TYPE:2"
Unit = "string"


# NAV

# Optional NAV3/4 frequencies for frequency keypad

; [Nav3ActiveFrequency]
; CategoryId = Communication
; Name = "NAV3 Active Frequency"
; SimVarName = "NAV ACTIVE FREQUENCY:3"
; Unit = "MHz"
; StringFormat = "000.000"
; DeltaEpsilon = 0.0009

; [Nav3StandbyFrequency]
; CategoryId = Communication
; Name = "NAV3 Standby Frequency"
; SimVarName = "NAV STANDBY FREQUENCY:3"
; Unit = "MHz"
; StringFormat = "000.000"
; DeltaEpsilon = 0.0009

; [Nav4ActiveFrequency]
; CategoryId = Communication
; Name = "NAV4 Active Frequency"
; SimVarName = "NAV ACTIVE FREQUENCY:4"
; Unit = "MHz"
; StringFormat = "000.000"
; DeltaEpsilon = 0.0009

; [Nav4StandbyFrequency]
; CategoryId = Communication
; Name = "NAV4 Standby Frequency"
; SimVarName = "NAV STANDBY FREQUENCY:4"
; Unit = "MHz"
; StringFormat = "000.000"
; DeltaEpsilon = 0.0009

# Used on Radio Stack

[Nav1SoundState]
CategoryId = Communication
Name = "NAV1 audio enabled (0/1)"
SimVarName = "NAV SOUND:1"
Unit = Bool

[Nav1Ident]
CategoryId = Communication
Name = "NAV1 Active Frequency ICAO code"
SimVarName = "NAV IDENT:1"
Unit = "string"

[Nav1Name]
CategoryId = Communication
Name = "NAV1 Active Frequency Name"
SimVarName = "NAV NAME:1"
Unit = "string"

[Nav2SoundState]
CategoryId = Communication
Name = "NAV2 audio enabled (0/1)"
SimVarName = "NAV SOUND:2"
Unit = Bool

[Nav2Ident]
CategoryId = Communication
Name = "NAV2 Active Frequency ICAO code"
SimVarName = "NAV IDENT:2"
Unit = "string"

[Nav2Name]
CategoryId = Communication
Name = "NAV2 Active Frequency Name"
SimVarName = "NAV NAME:2"
Unit = "string"

# XPNDR

# Used in frequency keypad to display current XPNDR settings.
# XPNDR 1 is used in the Radio Stack page.

[TransponderCode]
CategoryId = Communication
Name = "Transponder 1 Code"
SimVarName = "TRANSPONDER CODE:1"
Unit = "number"
StringFormat = "0000"

# Optional XPNDR2 code for frequency keypad

; [Transponder2Code]
; CategoryId = Communication
; Name = "Transponder 2 Code"
; SimVarName = "TRANSPONDER CODE:2"
; Unit = "number"
; StringFormat = "0000"

# Used on Radio Stack

[TransponderState]
CategoryId = Communication
Name = "Transponder State"
SimVarName = "TRANSPONDER STATE:1"
Unit = Enum
CanSet = True

[TransponderIdent]
CategoryId = Communication
Name = "Transponder Ident"
SimVarName = "TRANSPONDER IDENT:1"
Unit = Bool
CanSet = True

[RadioAltitude]
CategoryId = Communication
Name = "Radar altitude (radio height)"
VariableType = A
SimVarName = "RADIO HEIGHT"
Unit = "feet"
DefaultValue = "0"
StringFormat = "000#"
DeltaEpsilon = 0.99

# HSI

# Used on standalone "Radio Stack Page 4x7 v2" only

[HsiStationIdent]
CategoryId = Communication
Name = "HSI Ident ICAO code"
SimVarName = "HSI STATION IDENT"
Unit = "string"

[HsiBearing]
CategoryId = Communication
Name = "HSI Bearing (degrees)"
SimVarName = "HSI BEARING"
Unit = "degrees"
StringFormat = "F2"
DeltaEpsilon = 0.09

[HsiBearingValid]
CategoryId = Communication
Name = "HSI Bearing is Valid (0/1)"
SimVarName = "HSI BEARING VALID"
Unit = Bool

[HsiDistance]
CategoryId = Communication
Name = "HSI GPS/DME Distance (nm)"
SimVarName = "HSI DISTANCE"
Unit = "nm"
StringFormat = "F2"
DeltaEpsilon = 0.09

[HsiSpeed]
CategoryId = Communication
Name = "HSI GPS/DME Speed ("knots")"
SimVarName = "HSI SPEED"
Unit = ""knots""
StringFormat = "F2"
DeltaEpsilon = 0.09

[HsiTfFlags]
CategoryId = Communication
Name = "HSI Off/TO/FROM flag (0/1/2)"
SimVarName = "HSI TF FLAGS"
Unit = Enum

[GpsDrivesNav1]
CategoryId = Communication
Name = "HSI Source is GPS (0/1)"
SimVarName = "GPS DRIVES NAV1"
Unit = Bool