From 63481844ed763d9c4b3426283b63a7dac62a3509 Mon Sep 17 00:00:00 2001 From: Samuel Angebault Date: Wed, 15 Feb 2023 10:31:59 -0800 Subject: [PATCH] [Arista] Disable ATA NCQ for a few products (#13739) Why I did it Some products might experience an occasional IO failure in the communication between CPU and SSD. Based on some research it could be attributable to some device not handling ATA NCQ (Native Command Queue). This issue currently affect 4 products: DCS-7170-32C* DCS-7170-64C DCS-7060DX4-32 DCS-7260CX3-64 How I did it This change disable NCQ on the affected drive for a small set of products. How to verify it When the fix is applied, these 2 patterns can be found in the dmesg. ata1.00: FORCE: horkage modified (noncq) NCQ (not used) Test results using: fio --direct=1 --rw=randrw --bs=64k --ioengine=libaio --iodepth=64 --runtime=120 --numjobs=4 with NCQ (ata1.00: 61865984 sectors, multi 1: LBA48 NCQ (depth 32), AA) READ: bw=33.9MiB/s (35.6MB/s), 33.9MiB/s-33.9MiB/s (35.6MB/s-35.6MB/s), io=4073MiB (4270MB), run=120078-120078msec WRITE: bw=34.1MiB/s (35.8MB/s), 34.1MiB/s-34.1MiB/s (35.8MB/s-35.8MB/s), io=4100MiB (4300MB), run=120078-120078msec without NCQ (ata1.00: 61865984 sectors, multi 1: LBA48 NCQ (not used)) READ: bw=31.7MiB/s (33.3MB/s), 31.7MiB/s-31.7MiB/s (33.3MB/s-33.3MB/s), io=3808MiB (3993MB), run=120083-120083msec WRITE: bw=31.9MiB/s (33.4MB/s), 31.9MiB/s-31.9MiB/s (33.4MB/s-33.4MB/s), io=3830MiB (4016MB), run=120083-120083msec Which release branch to backport (provide reason below if selected) --- files/Aboot/boot0.j2 | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/files/Aboot/boot0.j2 b/files/Aboot/boot0.j2 index 591e205ca988..72f99935e4de 100644 --- a/files/Aboot/boot0.j2 +++ b/files/Aboot/boot0.j2 @@ -616,6 +616,10 @@ write_platform_specific_cmdline() { cmdline_add intel_idle.max_cstate=0 read_system_eeprom fi + if in_array "$platform" "rook"; then + # Currently applies to Alhambra, Blackhawk, Gardena and Mineral + cmdline_add libata.force=1.00:noncq + fi if in_array "$platform" "crow" "magpie"; then cmdline_add amd_iommu=off cmdline_add modprobe.blacklist=snd_hda_intel,hdaudio