Skip to content

A module should be designed that takes analog inputs from sensors, Ethernet commands from PLC and produces required outputs in the form of TTL logic for former input and serial output for latter input. The proposed solution is realized using Raspberry Pis as central parts of module which is equipped with other peripherals to behave as a complete…

License

Notifications You must be signed in to change notification settings

neeraj1397/COMMUNICATION-MODULE

Repository files navigation

COMMUNICATION-MODULE

A module should be designed that takes analog inputs from sensors, Ethernet commands from PLC and produces required outputs in the form of TTL logic for former input and serial output for latter input. The proposed solution is realized using Raspberry Pis as central parts of module which is equipped with other peripherals to behave as a complete working module. The module is intended to be used in submarines to communicate between PLCs and antennas and also drive large relays in response to sensor data.

APPROACHES

  1. An Arduino(Micro controller) based solution was proposed earlier. It has some problems. Arduino boards don’t have Ethernet compatible port so it requires external Ethernet shield. In order to get the serial output(rs232/422) the smart boards have to be stacked on the Arduino which requires PHPOC shield to be attached externally. This makes the hardware more complex. Even after completion of module(COTS), Arduino could not be compatible with further enhancements of the product.
  2. A Raspberry Pi(SoC) based solution. It has a built-in Ethernet port, several GPIO pins. It(python) has also got huge library to make the code simple and efficient compared to the C/C++ based Arduino software. There are many serial output shields available that can be directly stacked upon the Raspberry Pi. Further, any modification in future could be easily made. These features made us to proceed with the Raspberry Pi based solution.

COMPONENTS USED

The following are the components of the module designed:

  1. Raspberry Pi 3 Model B+ (2 Nos)
  2. MCP3208-Analog to Digital Converter
  3. Isolated RS485/RS422 Raspberry Pi HAT
  4. CMOS to TTL(TXS0108E) high speed full duplex 8 channel logic level converter

About

A module should be designed that takes analog inputs from sensors, Ethernet commands from PLC and produces required outputs in the form of TTL logic for former input and serial output for latter input. The proposed solution is realized using Raspberry Pis as central parts of module which is equipped with other peripherals to behave as a complete…

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages