Skip to content

Latest commit

 

History

History
199 lines (158 loc) · 8.46 KB

INSTALL-Docker-Custom.md

File metadata and controls

199 lines (158 loc) · 8.46 KB
Raw

Deploying Fitcrack using a custom Docker build

This document describes how to prepare and run a custom Docker build of Fitcrack server.

Requirements

Install Docker Engine 20.10.x. See instructions for you distro here: https://docs.docker.com/engine/install/

Install docker-compose 1.29.x. You can use the following command:

sudo curl -L "https://github.com/docker/compose/releases/download/1.29.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose

NOTE: Stick with the recommended versions if possible. Older versions may not work. Newer releases were not tested.

Checking if you have BOINC submodule

Fitcrack relies on BOINC, which is used as a submodule. Therefore, it is recommended to clone Fitcrack with the --recursive option:

git clone --recursive https://github.com/nesfit/fitcrack

If you did not (and the boinc directory is empty), you can fix this by typing

git submodule init
git submodule update

Preparing the .env configuration file

Now it is time for the setup! Create a new .env config file from the example attached:

cp env.example .env

Fitcrack-architecture

Edit the newly-created .env file and configure:

  • FITCRACK_SERVER_HOST to the domain name or IP of your host machine
  • In most cases, it is fine to default ports: 80 for the WebAdmin frontend and the BOINC server, and 5000for the WebAdmin backend. But you can change them if you want.
  • It is recommended to change the MySQL password FITCRACK_DB_PW.
  • The default WebAdmin login is fitcrack/FITCRACK. We highly recommend to change it by modifying the WEBADMIN_LOGIN and WEBADMIN_PW variables.
  • SSL is disabled by default. If you want to enable it, follow the instructions below.

Building Fitcrack image

Once you have everything prepared, you can start the build of your own fitcrack_server with:

docker-compose -f docker-compose-custom-build.yml build

Please note that this process will compile everything from source and it may take some time.

Once done, you can type

docker image ls

to see whether you have your image ready. You should see something like this:

REPOSITORY        TAG       IMAGE ID       CREATED       SIZE
fitcrack_server   latest    9742ce4d598a   3 hours ago   3.79GB

Starting the fitcrack_server container

Once the fitcrack_server image is prepared and .env file configured, you can run the server container using:

docker-compose -f docker-compose-custom-build.yml up

Fitcrack-architecture

This is fine for debugging. For serious use, you may want the container to run on background. This can be dome by starting the container in the detached mode:

docker-compose up -d

For the very first run, the entrypoint will install the Fitcrack project which may take a couple of minutes. For next runs (in case you restart the container), it will automatically load the previous installation from the host-stored volumes.

Once installed, you should be able to access the WebAdmin using: http(s)://FITCRACK_SERVER_HOST:FRONTEND_PORT that is http://localhost with default settings.

Hosts may connect using BOINC client, as described in How to connect new hosts For connection, you should use the http(s)://FITCRACK_SERVER_HOST:BOINC_PORT/fitcrack. In case localhost is used , the BOINC client needs to connect to http://127.0.0.1/fitcrack with default settings.

Configuring SSL (Optional)

To configure SSL on Fitcrack, you should first get a domain. Then, you need to obtain a valid certificate for your domain name. You can get one from LetsEncrypt or any other trusted certificate issuer.

It is also possible to use a self-signed certificate, but you may need to force your browser and the BOINC client on all your hosts to trust the certificate. Otherwise they would not be able to connect.

First, remove any previous installations of Fitcrack server:

./remove_docker_installation.sh

Create a directory named ./fitcrack-data/certificates in your installation directory. Make sure to set the permissions right that the docker-compose can access the files. Copy the certificate and associated private key file in PEM format into the directory:

cp fullchain.pem ./fitcrack-data/certificates/
cp privkey.pem ./fitcrack-data/certificates/

Now, you can configure SSL in the .env file.

Configure Fitcrack server hostname to your domain name:

FITCRACK_SERVER_HOST="my.fitcrack.com"  # The IP or domain name of Fitcrack server

Configure the certificate and private key file names if they are different from above:

SSL_CERTIFICATE_FILE="fullchain.pem"  # Public key for your domain (if SSL is on)
SSL_CERTIFICATE_KEYFILE="privkey.pem" # Private key for your domain (if SSL is on)

Enable SSL for the WebAdmin:

SSL_WEBADMIN='y'      # SSL state of WebAdmin: 'y' or 'n'
WEBADMIN_PROTO=https  # http or https (if SSL_WEBADMIN='y')
BACKEND_PORT=5443     # Port for WebAdmin backend (5443 for SSL)
FRONTEND_PORT=443     # Port for WebAdmin frontend (443 for SSL)

Enable SSL for the BOINC server:

SSL_BOINC='y'      # SSL state of BOINC server: 'y' or 'n'
BOINC_PROTO=https  # http or https (if SSL_BOINC='y')
BOINC_PORT=443     # BOINC server port (443 for SSL)

Install and run the Fitcrack server:

docker-compose up

Check if you can access WebAdmin: https://your.domain/. Check if you can connect a new host by adding https://your.domain/fitcrack project using BOINC Manager/Client.

NOTE: It is also possible to enable SSL to WebAdmin or BOINC client only, if this is what you want for your use-case.

Debugging

Many of reported issues were caused by improper network configuration. To debug connectivity issues, we recommend removing previous installation with ./remove_docker_installation.sh and making a fresh one with default settings from env.example. Also, make sure no other web server is running on port 80 of your machine. If your Fitcrack server does not work even with the default settings, the problem is most likely in your Docker environment. Thus, check if you have appropriate versions of Docker Engine and docker-compose. We also recommend to use docker-compose up without the -d parameter for debugging so that you can see what is happening during the installation.

Once you get Fitcrack running with default settings, you may experiment with modifications of the .env variables. Whenever you modify the variables, you should reinstall the Fitcrack server, i.e., remove the running container and volumes using ./remove_docker_installation.sh and stsart over to apply changes.

For debugging WebAdmin, you should first check if the backend is running, e.g.: http://localhost:5000. You can also check the frontend configuration file http://localhost/static/configuration.js if it is connecting to the proper address. By default, backend's hostname is taken from you browser URL hostname. This can be disabled using the DYNAMIC_BACKEND_URL variable.

For debugging BOINC server, check if the hostname, protocol and ports are set properly on both server and client machines. With default settings, BOINC clients should connect to the project server at http://127.0.0.1/fitcrack. In case of connectivity issues, check that the hostname/IP are correct. Also, see if all daemons are running on the WebAdmin: System - Server monitor page.

Also, you can check the /fitcrack-data/logs directory and browse logs of individual server components, e.g. WebAdmin backend log, Work Generator log, etc.

For more advanced debugging, you may descend directly into the running Fitcrack container. Check docker ps -a to see the container ID and type docker exec -it <CONTAINERID> /bin/bash to enter the shell. Check if the daemons are running using service fitcrack status. Check if Apache is running using service apache2 status. The BOINC project installation is located at /home/boincadm/projects/fitcrack. Apache configs are found at /etc/apache2. WebAdmin frontend is located in /var/www/html/fitcrackFE and backend in /var/www/html/fitcrackAPI. Good luck!

Removing existing installation

To remove an existing installation, you should delete the fitcrack_server container and all related volumes. To automate the process, you can run:

./remove_docker_installation.sh