Skip to content

Latest commit

 

History

History
573 lines (465 loc) · 23.2 KB

CHANGELOG.md

File metadata and controls

573 lines (465 loc) · 23.2 KB
Raw

Change Log

All notable changes to this project will be documented in this file.

[2.0.0] - 2024-11-02

Bugfixes

Too many to list, but all of the confirmed bugs up to now have been fixed.

Breaking changes

  • [firmware] Removed build flag for OFFICIALBOARD #533 @matjack1
  • [firmware] MQTT endpoints have been changed to be more consistent and complete #501 @matjack1

Added

  • [firmware] Addedd support for software serial to support RDM6300 sensors on custom pins #655 @teodino93
  • [firmware] Moved to native Arduino support for timezone and NTP to support daylight saving time #604 @matjack1
  • [firmware] Added door name, to send via MQTT access type and door name for setups with multiple doors #598 @matjack1
  • [firmware] Added more options for Wiegand readers on which bits to read #582 @matjack1
  • [firmware] Added support for MQTT auto-topic with topic postfixed with 6 characters from MAC address #566 @matjack1
  • [firmware] Added support to read/write configuration via MQTT #565 @matjack1
  • [firmware] Added valid-since date for user validity #562 @matjack1
  • [firmware] Added support for pincode only option to open door #551 @matjack1
  • [webui] Improved support for websocket reconnection #502 @matjack1
  • [firmware] Added opening hours with an hourly granularity #499 @matjack1
  • [firmware] Added LED to signal that we are waiting for pincode and beeper support #490 @matjack1
    • beeper for valid, denied or admin access
  • [firmware] Added different pincode for each user after a card swipe #477 @matjack1
  • [firmware] Improvements in MQTT including AutoDiscovery for the Home Assistant #449 #559 @xyzroe
  • [firmware] Added anti-tamper support #449 @xyzroe
  • [firmware] Added pin to give users feedback when access denied #426 @matjack1
  • [firmware] Added ability to delete a single user over MQTT via UID #424 @baden02
  • [docs] improved MQTT documentation #416 #423 @matjack1 @baden03
  • [firmware] added doorbell support #415 @matjack1
  • [firmware] improved decoding of Wiegand keypresses #360 @christofkac
  • [firmware] added support for multiple relays #318 @frenchie71
  • [firmware] optional BSSID for wifi connections #307 @frenchie71
  • [firmware] Initial support for Wiegand Keypads @frenchie71
  • [firmware] Initial support for OTP (TOTP) @frenchie71
  • [webui] Added Download function for log files @frenchie71
  • [webui] Log file options on WebUI @frenchie71
  • [firmware] Log Maintenance Split, Rollover, View, Delete @frenchie7
  • [firmware] Added button to open door and door status pin @nardev

Changed

  • [firmware] Changed timezone support to add daylight saving management #604 @matjack1
  • [firmware] Refactor WiFi connection #495 #497 #536 @matjack1
    • Option to disable access point mode for production usage
    • Automatic retries when connection drops
  • [firmware] Refactor configuration #485 @matjack1
  • [firmware] Upgrade to ArduinoJSON v6 #483 @matjack1
  • [tools] Added Github Actions instead of Travis CI for building esp-rfid and ancillary tools #478 #482 @matjack1
  • [firmware] Improved MQTT support #475 #476 #484 #487 #488 @matjack1
    • added queue for message processing to avoid watchdog timeout
    • ACK message on processing, to enable throttling of incoming messages
    • better reconnection on WiFi reconnections
  • [firmware] Refactor RFID reading #471 #491 #496 @matjack1
    • separate reading card, reading pincode, processing
    • better support for external feedback, LEDs, beeper
  • [tools] updated Gulp scripts for building web UI #414 #473 @matjack1
  • [firmware] improved wifi handling #374 #375 @ingeninge
  • [firmware] Wi-Fi connection routine is now improved @frenchie71
  • [firmware] Log file operations are now more robust @frenchie71

[1.3.3] Test-Release 2019-06-22

Fixed

  • PlatformIO ISR not in IRAM! Hotfix

[1.3.1] Test-Release 2019-06-21

Added

  • [firmware] Support for Door Status tracking with log and mqtt options @nardev
  • [firmware] adding mqtt_publish_info, generateUid functions @nardev
  • [firmware] MQTT functionality is greatly improved thanks to @marelab

Reading all user data over MQTT Sending User data to RFID-DOOR/ESP-RFID over MQTT Sending door open command over MQTT Sending door status over MQTT as event Sending Sync of a RFID-DOOR (IP/Hostname) over MQTT Configure Sync interval over ESP-RFID GUI Deleting all User of a ESP-RFID device over MQTT Sending log event & access data over MQTT

Changed

  • [firmware] Renaming some variable names @nardev
  • [firmware] order of settings in web and hr lines @nardev

Fixed

  • [webui] Make possible to connect WebUI behind NAT-ed network @Pako2 @abdulhanananwari
  • [firmware] Issue #240 "Backup User Data only returns some users" @nardev

[1.0.2] 2019-01-28

BREAKING CHANGES (These changes will break your data on device, please make sure made a backup, also you can not use your old settings on this release but only can restore user data)

Added

  • [firmware] Open/Close Button support @donatmarko
  • [firmware] Logging Open/Close Button @donatmarko
  • [firmware] the VERSION string is now defined at the beginning of main.cpp @Pako2
  • [firmware] #218 Added latching relay support @donatmarko
  • [firmware] #189 Flash layout changed to 2MB Firmware / 2MB SPIFFS Data @Pako2
  • [firmware] Support for RDM6300 RFID readers (125kHz, UART) #163 @arduino12 / concurrently by @Pako2
  • [firmware] debug firmware for debugging purposes
  • [tools] executables for tools (no longer need to have node js and gulp for web ui development - only lightly tested)
  • [firmware] LED_BUILTIN lights up while wifi connected and flashes when it waits for wifi @Pako2
  • [webui] IP address choice option in AP mode @Pako2
  • [webui] favicon.ico @Pako2
  • [tools] websocket emulator can now store new configuration temporarly
  • [firmware] log for firmware update #152
  • [webui] Expired access attempts logged as "Expired"

Fixed

  • [firmware] UART Monitor speed @donatmarko
  • [firmware] avoid double Serial.begin @Pako2
  • [firmware] removing redundant terminating null character @Pako2
  • [firmware] fix the loadconfiguration loop @Pako2
  • [firmware] not able to connect MQTT server #157 @fivosg
  • [firmware] a MQTT message typo #157 @wamboin23
  • [webui] some breaks on web pages
  • [webui] usage of !important CSS rule
  • [firmware] #191 relay type inversion @Pako2
  • [firmware] #190 Increase PN532::WaitReady debug level @Pako2
  • [firmware] validuntil is being ignored #151
  • [firmware] the boot loop when ssid is empty on configuration file (actually more a workaround than a fix) #154

Changed

  • [firmware] unify output format debug print of PICC @Pako2
  • [firmware] Improve onWsEvent() function @Pako2
  • [build] Change release type to a zip file (was tar.gz before)
  • [webui] scrollbar on desktop screens (now hidden)
  • [webui] sidebar colors (i hope you like it, standart bootstrap color)
  • [webui] sanity check for firmware update file #152
  • [firmware] lock MFRC522 library to version 1.4.1

[0.8.1] 2018-09-01

Added

  • [firmware] Global websocket message to inform ws clients to toggle relay (upcoming client version will use it)
  • [webui] incremental id for event log

Fixed

  • [webui] available flash space calculation
  • [webui] #143 duplicate records on User Data backup
  • [firmware] #140 MQTT Heartbeat
  • [webui] official board's hardware settings did not populate

Changed

  • [firmware] do not initialize serial output unless we are debugging
  • [build] slice main.cpp to multiple parts for better readability
  • [webui] Access Type Active to Always
  • [firmware] more reliable activation of relay

[0.8.0]

Breaking Changes

  • [firmware] Flash partition is changed to 1+3 !!! You need to backup your settings and users before updating to this version
  • [firmware] For wiegand readers card id's changed hexadecimal to decimal !!! You need to change hexadecimal values to decimal values on your user backup file

Added

  • [build] Optimize code for official board
  • [firmware] mqtt boot, hearthbeat, access message added

Fixed

  • [firmware] #128 Do not retain MQTT publishes
  • [firmware] Compiller warnings fixed

Changed

  • [webui] Default wifi type to AP
  • [firmware] MQTT Messages are now plain JSON encoded texts
  • [build] flash.bat file now asks which firmware to flash

[0.7.6] - 2018-07-13

Fixed

  • [firmware] #98 WDT Reset

[0.7.5] - 2018-06-09

Fixed

  • [build] BearSSL dependency error with Platformio
  • [webui] #115 version numbering
  • [firmware] #101 Permanent AP Mode

Changed

  • [build] Updated PlatformIO configuration file for next PIO release

[0.7.4] - 2018-04-28

Fixed

  • [webui] comment out access types
  • [firmware] fix a compile warning
  • [firmware] change startAP behaviour
  • [firmware] publish username to MQTT broker
  • [firmware] mqtt username password memory collusion

Removed

  • [firmware] Modified header

[0.7.3] - 2018-04-04

Added

  • [firmware] More debug messages

Fixed

  • [webui] minor fixes suggested by Codacy
  • [webui] get javascript values as real integers

[0.7.2] - 2018-04-02

Fixed

  • [webui] MQTT is enabled by default.

[0.7.1] - 2018-03-30

Added

  • [firmware] + [webui] Option to use static IP address #89 @nbaglietto
  • [firmware] + [webui] Option to hide SSID on AP Mode #89 @nbaglietto
  • [webui] Auto focus on login password #94 @pidiet
  • [firmware] event log for MQTT

Fixed

  • [webui] We were checking wrongly if the browser has previously had authentication over /login.
  • [webui] MQTT listed disabled even if it is enabled #92 @pidiet

[0.7.0] - 2018-03-23

Added

  • [firmware] !!! BREAKING CHANGE !!! 2 MB Flash 2 MB SPIFFS size for future proof firmware updates plase make sure you made a backup before updating to this version. You need to format SPIFFS.
  • [firmware] Experimental PN532 RFID Reader Support
  • [webui] Try to connect button upon inprogress complete.
  • [webui] Restart without saving changes.
  • [firmware] Staging framework for platformio

Changed

  • [webui] Sign in panel now integrated into index.html
  • [firmware] Reduced serial outputs.
  • [firmware] Switched to Async MQTT Library, needs testing.

Fixed

  • [firmware] Logs causing Exception 9 because we are delaying async function with NTP sync by WiFi.hostbyname
  • [webui] wrong version is shown #80.
  • [webui] whole html was shifted with previous css change.

Removed

  • [firmware] Factory reset via pin

[0.6.1] - 2018-03-14

Added

  • [firmware] ICACHE_FLASH_ATTR and ICACHE_RAM_ATTR decorators (did not feel any difference in terms of speed, keeping it anyway).
  • [dev tools] Web UI Demo https://bitadvise.com/esp-rfid/
  • [dev tools] Websocket emulator access log

Changed

  • [webui] Always show sidebar on big screens
  • [webui] Better versioning.

Fixed

  • [build] Platformio bug

[0.6] - 2018-03-11

Added

  • [firmware] Restart ESP if softAP fails.
  • [webui] Colorize access log based on result.

Fixed

  • [webui] progress bar for factory reset, update, save settings does not initiated correctly.
  • [webui] BSSID is missing when first scan.
  • [webui] Now firmware internally holds only unix time, made changes on webui to cover that.

Changed

  • [webui] Completely refactored html loading, we are getting all files at first login, then no request is made to web server which greatly simplifies some functions.
  • [webui] + [firmware] Completely refactored Latest Access Log, it's now unlimited Access Log which holds every picc scan. This should fix #60 (at least there is clear log button :) ).
  • [webui] Event log table now displays firmware time for early events.
  • [webui] before fetching data wait sidebar to dismiss for smooth animation.
  • [webui] fade in web content.
  • [firmware] Log login remote IP address.

[0.5.4] - 2018-03-09

Added

  • [webui] colorize event logs based on severity.
  • [webui] progress bar on saving settings.
  • [dev tools] event log for websocket emulator

Fixed

  • [firmware] Fix #75 Scan of wifi returns more columns of the same wifi.
  • [webui] Fix #74 #33 completely New user with incorrect validity.
  • [webui] New user with incorrect date.
  • [webui] Editing user results non parsed values.

Changed

  • [webui] event table breakpoints.

[0.5.3] - 2018-03-08

Added

  • [webui] Firmware Update is now live with latest version check on GitHub.

Fixed

  • [firmware] Update was possible with an unauthorized HTTP Post.

[0.5hotfix2] - 2018-03-07

Added

  • [webui] Factory reset within Web UI.
  • [webui] + [firmware] Event logging is now live.

Fixed

  • [firmware] Can not with default password login on fresh setup.

Changed

  • [webui] Changes suggested from Codacy.

[0.5hotfix1] - 2018-03-06

Added

  • [firmware] !!!! Breaking Change !!!! Factory reset on boot if GPIO-16 is LOW or SPIFFS is corrupted. Make changes accordingly.
  • [webui] Touch detect on touch enabled devices in order to open/close sidebar on swipe.
  • [webui] Logout is now live (this is actually a dirty hack);

Fixed

  • [dev tools] - Websocket emulator time was static
  • [firmware] #68 NTP functions cause Exception 9 and ESP crashes

Changed

  • [webui] Embarrassing multiple HTM pages now reduced to one.
  • [webui] Better representing of device and browser times on NTP settings.
  • [webui] Prevent closing restore modal until it is finished.
  • [firmware] Refactored NTP.

Removed

  • [webui] Removed GPIO-16 options due to it is being used for Factory Reset
  • [firmware] Drop usage of NTPClientLib.

[0.5beta] - 2018-03-02

Added

  • [firmware + webui] Embedded web files
  • [firmware + webui] MQTT to main branch.
  • [firmware + webui] Access column to logs for the information, if the access was granted or not @romanzava
  • [build] Travis CI
  • [firmware] Glyphicons redirection for SPIFFS's limited 32 char filename.
  • [dev tools] WebSocket emulator for rapid web page development. (This require node.js)
  • [build] Gulp script for auto css/js file concat and gzip
  • [dev tools] Offline static web page development capability (enter "neo" as admin password for local testing)
  • [dev tools] gulp script for PROGMEM web files.

Changed

  • [webui] New look and feel - refactored Web UI
  • [webui] Hardcoded FooTable Add/Edit text
  • [webui] Only support woff glyphicons font
  • [dev tools] Clean and beautify main.cpp @nardev
  • [webui] Minor cosmetic changes
  • [webui] Javascript loading moved to end of the html
  • [build] more meaningful directories for web files.
  • [webui] RSSI percent calculation
  • [firmware] Limit printScanResult to 5 best (based on RSSI) networks around (esp becomes unresponsive if there are too many networks)
  • [build] pio script where we were trying to modify flashing parameters it was affecting SPIFFS upload too.

Fixed

  • [firmware + webui] MQTT - UID publish was missing.

Removed

  • [firmware] Web files no longer contained in SPIFFS
  • [firmware] SPIFFS Editor.
  • [firmware] Confusion about MFRC533 reader.

[0.4alpha] - 2018-01-21

Added

  • Initial Wiegand Reader (RFID Reader) support. - @nardev
  • Use secure WebSocket protocol if there is a reverse proxy available. - @thunderace

Changed

  • Default IDE is now PlatformIO, from now on Arduino IDE support is dropped.
  • SPIFFS Editor's password is now same with the administration password -@thunderace
  • SPI SS pin is now have a default value 15 when there is no configuration file. - @thunderace

[0.3beta] - 2017-12-24

Fixed

  • Partly fixed (We still have a quirk with adding new user, may fixed by library level) #33

[0.3beta] - 2017-12-09 (zeraien)

Fixed

  • Fallback AP now gets SSID ESP-RFID-xxxxxx (last 6 digits of mac).
  • Also refactored to remove code duplication, new method startAP(ssid, password=NULL) rather than duplicating AP creation.

[0.3beta] - 2017-12-09 (zeraien)

Added

  • Automatically disconnects wifi until an "admin" card is read in by the user. Default is to keep wifi on unless configured otherwise.
  • Add automatic restart setting, to lessen risk of memory leaks and crashes.
  • The wifi network created will have the same name as the "hostname", in case you have multiple units nearby

Changed

  • Also some minor tweaks to web interface.

[0.3beta] - 2017-12-03 (thunderace)

Added

[0.3beta] - 2017-10-28

Added

  • Basic Authentication on WebSocket

Changed

  • minor cosmetic change

Fixed

  • WebSocket fails without null pointer on Mac #17

[0.3alpha3] - 2017-09-06

Added

  • New /compiledbin/flash.bat for easy flashing (For Windows Users)
  • Sort Latest Log by Date
  • 2 second cooldown for RFID Tag scans (to prevent double scans)

Changed

  • Refactored Wi-Fi Network Scan. Now we are scanning hidden networks too, also additional info is now given to Web UI (Signal Strenght, BSSID of the Network also non used Encryption Type, Channel)
  • Scanned Wi-Fi Network List is now sorted by Signal Strenght (RSSI, greater is better)

[0.3alpha2] - 2017-08-31

Added

  • Uptime to status
  • Tooltips for settings

Removed

  • Captive Portal

[0.3alpha1] - 2017-08-28

Added

  • Support for both Active Low and Active High Relays
  • Basic loging (inefficent and limited to last 15 records)

Fixed

  • #11 Simplified captive portal behaviour for stable AP Mode experience.

[0.3alpha] - 2017-08-18

Added

  • Support for jQuery v1.12.4
  • Support for Bootstrap Javascript v3.3.7
  • Support for Bootstrap Glyphicons
  • Support for FooTable v3.1.6

Changed

  • Refactored picclist command (JSON Array is now more human readable, can be queried page by page, initially 15 records per page due to Mobile Devices limiting maximum WebSocket message lenght, I do not know if this a feature or a bug)
  • Restoring User Data is improved (restoring is now done one by one only when the ESP is ready to digest another userfile)
  • Backup User Data is improved (thanks to newly optimized userlist command we are getting all the data from ESP page by page)
  • Refactored User List (thanks to FooTable user list is now fully searchable, sortable, filterable, editable)
  • Refactored framework's required Javascript and CSS files (All files minified and gzipped together, this will reduce requests made to ESP)
  • While restoring user data now we are showing a pop-up (bootstrap modal)

Misc

[0.2] - 2017-08-09 We hit the V0.2 thanks to rneurink

Added

  • BSSID Setting (This will allow to connect specific Access Point if there are more than one AP with the same SSID)
  • Available SPIFFS storage @rneurink

Fixed

  • Incorrect time were being sent to device (without timezone offset)
  • Device Status in AP Mode @rneurink
  • ESP gets unresponsive when device is in AP Mode (#11)

Changed

  • Colorize progress bars depending on percentage @rneurink
  • haveAcc to acctype (This will break backward compatibility if you made backup on previous version, there is a workaround that i can share if anyone wants)
  • Switched to new NTP Client Library https://github.com/gmag11/NtpClient/

[0.2rc2] - 2017-08-07

Added

  • Time Settings
  • Hostname Setting
  • UID sanity check on Users Page

Fixed

  • Restoring Users too fast (increased to 200ms) @rneurink

Changed

  • Device Status location
  • Bootstrap Version to v3.3.7

Removed

  • Dropped NTPClient Library Usage (since we have TimeLib)

[0.2rc1a] - 2017-08-03

Added

  • New WebSocket command "status" (sends bunch of information to browser)
  • Device Statics on Settings Page
  • Restoring User Data (restoring large backups can take a while because we are sending user data to ESP one by one and waiting 100ms each time to make sure ESP can handle it)

Changed

  • Branding (Copyright symbol is dropped, feel free to use this project as you want) See License

[0.2rc1] - 2017-08-02

Added

  • Refresh page after saving settings. @rneurink
  • Captive Portal for easy first setup. @rneurink
  • Long-time-missing the "Remove" button. (Initialy we were getting always valid UID but now things were changed)
  • Administrator Password setting.
  • Basic Backup / Restore facility. (For now we can only restore settings not the Users)

Fixed

  • Settings Page shows "... WebSocket connecting" message even if the connection was made
  • Quirk in Sorting User List

Changed

  • Config File now is more human readable.

Removed

  • SPIFFS Update from Web (we will likely be able to update it directly from Internet)

[0.1a] - 2017-07-14

Added

  • Now you can select Wi-Fi mode.

Fixed

  • Some fixes (features) were not included in previous release
  • NTPClient wastes CPU time when device is in AP mode. (probably tries to force update time)

[0.1] - 2017-07-12 - :hurray: We hit the 0.1!

Added

  • Relay Module configuration in Settings Page (You need to make sure how the relay module reacts when device is restarting or on power-on, make changes accordingly). I may try to make it more universal, but for now it's up to you.
  • Relay Test Button
  • Ability to Add known PICC to User List (useful to add new PICC to device when device is already deployed)

Removed

  • We do not need hardware reset anymore this frees a GPIO from MCU. (suggested by @farthinder #6 )

[0.1rc2] - 2017-07-10 - Release Candidate

Added

  • User List table now automaticly sorted by Name
  • Click on an any element on User List to edit via Add / Update User
  • User List actions are instantly happens on the ESP hardware.

Fixed

  • Javascript functions (As suggested from JSHint and Codacy)

Misc

[0.1rc1] - 2017-07-05 - Release Candidate

Added

  • Simple Firmware Update from settings page
  • SPIFFS Update from settings page
  • Now you can define a user name (or any label) for each PICC
  • Now each PICC can be individually configured for access (before this, every known PICC had an access)

Fixed

  • Logging In Authorization is now done via Async XMR Request. Browsers does not complain about it being synchronous anymore. (Tested with Chrome and Firefox)

Changed

Removed

  • Appending ChipID to hostname

[0.0.3] - 2017-06-22

Added

  • RFID Hardware Pin and Gain settings via Web
  • New WebSocket commands and better command scheme

Fixed

  • can not fallback to AP Mode if configuration file is missing/corrupt

Changed

  • Seperate Javascript file
  • Refactor settings page
  • Refactor Fall Back to AP Mode behaviour
  • Rafactor configuration file structure
  • Web page files now have support for mobile devices and as well as PCs

Removed

  • Jumbotron CSS

[0.0.2] - 2017-06-10

Added

  • 'Settings' Menu - (and some snippets)
  • Wi-Fi Client Settings can now be configured via Web

Changed

  • STA - AP Mode behaviour is improved
  • Minor changes

[0.0.1] - 2017-05-10

Misc

  • Initial public upload
  • Code is now heavily commented