[shelly] Support for Plus RGBW PM in "Lights x 4" mode

[darkspirit510]

Hi all,

#16405 requested Shelly RGBWPM to be supported by Shelly binding. It has been solved via #17692 and released with openHAB 4.3. As mentioned in #17692 (comment), the PR only works if RGBW mode is active. It fails when the Shelly is configured to separate channels (aka Lights x 4).

Please add another Thing type to distinguish between those two modes, similar to shellyrgbw2:

shellyrgbw2-color 	Shelly RGBW2 Controller in Color Mode 	SHRGBW2
shellyrgbw2-white 	Shelly RGBW2 Controller in White Mode 	SHRGBW2

Thank you!

[MarijnO]

Not sure if this is the right place. I run into the same issue (RGBW is supported, Lights x4 not).
I've added the log in the post below.
https://community.openhab.org/t/shelly-binding/56862/4208?u=marijn_oudijk

[openhab-bot]

This issue has been mentioned on openHAB Community. There might be relevant details there:

https://community.openhab.org/t/shelly-binding/56862/4210