diff --git a/README b/README index 7d3f10def0..950c71f707 100644 --- a/README +++ b/README @@ -1,5 +1,4 @@ -Welcome to OpenOCD! -=================== +# Welcome to OpenOCD! OpenOCD provides on-chip programming and debugging support with a layered architecture of JTAG interface and TAP support including: @@ -26,33 +25,33 @@ This README file contains an overview of the following topics: - packaging tips. -============================ -Quickstart for the impatient -============================ +# Quickstart for the impatient If you have a popular board then just start OpenOCD with its config, e.g.: - openocd -f board/stm32f4discovery.cfg + openocd -f board/stm32f4discovery.cfg If you are connecting a particular adapter with some specific target, you need to source both the jtag interface and the target configs, e.g.: - openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \ - -f target/ti_calypso.cfg +``` +openocd -f interface/ftdi/jtagkey2.cfg -c "transport select jtag" \ + -f target/ti_calypso.cfg +``` - openocd -f interface/stlink.cfg -c "transport select hla_swd" \ - -f target/stm32l0.cfg +``` +openocd -f interface/stlink.cfg -c "transport select hla_swd" \ + -f target/stm32l0.cfg +``` After OpenOCD startup, connect GDB with - (gdb) target extended-remote localhost:3333 + (gdb) target extended-remote localhost:3333 -===================== -OpenOCD Documentation -===================== +# OpenOCD Documentation In addition to the in-tree documentation, the latest manuals may be viewed online at the following URLs: @@ -71,35 +70,34 @@ by subscribing to the OpenOCD developer mailing list: openocd-devel@lists.sourceforge.net -Building the OpenOCD Documentation ----------------------------------- +## Building the OpenOCD Documentation By default the OpenOCD build process prepares documentation in the -"Info format" and installs it the standard way, so that "info openocd" +"Info format" and installs it the standard way, so that `info openocd` can access it. Additionally, the OpenOCD User's Guide can be produced in the following different formats: - # If PDFVIEWER is set, this creates and views the PDF User Guide. - make pdf && ${PDFVIEWER} doc/openocd.pdf +If `PDFVIEWER` is set, this creates and views the PDF User Guide. - # If HTMLVIEWER is set, this creates and views the HTML User Guide. - make html && ${HTMLVIEWER} doc/openocd.html/index.html + make pdf && ${PDFVIEWER} doc/openocd.pdf + +If `HTMLVIEWER` is set, this creates and views the HTML User Guide. + + make html && ${HTMLVIEWER} doc/openocd.html/index.html The OpenOCD Developer Manual contains information about the internal architecture and other details about the code: - # NB! make sure doxygen is installed, type doxygen --version - make doxygen && ${HTMLVIEWER} doxygen/index.html +Note: make sure doxygen is installed, type doxygen --version + make doxygen && ${HTMLVIEWER} doxygen/index.html -================== -Supported hardware -================== -JTAG adapters -------------- +# Supported hardware + +## JTAG adapters AM335x, ARM-JTAG-EW, ARM-USB-OCD, ARM-USB-TINY, AT91RM9200, axm0432, BCM2835, Bus Blaster, Buspirate, Cadence DPI, Cadence vdebug, Chameleon, CMSIS-DAP, @@ -116,8 +114,7 @@ sysfsgpio, Tigard, TI XDS110, TUMPA, Turtelizer, ULINK, USB-A9260, USB-Blaster, USB-JTAG, USBprog, VPACLink, VSLLink, Wiggler, XDS100v2, Xilinx XVC/PCIe, Xverve. -Debug targets -------------- +## Debug targets ARM: AArch64, ARM11, ARM7, ARM9, Cortex-A/R (v7-A/R), Cortex-M (ARMv{6/7/8}-M), FA526, Feroceon/Dragonite, XScale. @@ -125,8 +122,7 @@ ARCv2, AVR32, DSP563xx, DSP5680xx, EnSilica eSi-RISC, EJTAG (MIPS32, MIPS64), ESP32, ESP32-S2, ESP32-S3, Intel Quark, LS102x-SAP, RISC-V, ST STM8, Xtensa. -Flash drivers -------------- +## Flash drivers ADUC702x, AT91SAM, AT91SAM9 (NAND), ATH79, ATmega128RFA1, Atmel SAM, AVR, CFI, DSP5680xx, EFM32, EM357, eSi-RISC, eSi-TSMC, EZR32HG, FM3, FM4, Freedom E SPI, @@ -140,12 +136,9 @@ TI CC13xx, TI CC26xx, TI CC32xx, TI MSP432, Winner Micro w600, Xilinx XCF, XMC1xxx, XMC4xxx. -================== -Installing OpenOCD -================== +# Installing OpenOCD -A Note to OpenOCD Users ------------------------ +## A Note to OpenOCD Users If you would rather be working "with" OpenOCD rather than "on" it, your operating system or JTAG interface supplier may provide binaries for @@ -164,8 +157,7 @@ Users of these binary versions of OpenOCD must contact their Packager to ask for support or newer versions of the binaries; the OpenOCD developers do not support packages directly. -A Note to OpenOCD Packagers ---------------------------- +## A Note to OpenOCD Packagers You are a PACKAGER of OpenOCD if you: @@ -192,11 +184,9 @@ suggestions: - Use "ftdi" interface adapter driver for the FTDI-based devices. -================ -Building OpenOCD -================ +# Building OpenOCD -The INSTALL file contains generic instructions for running 'configure' +The INSTALL file contains generic instructions for running `configure` and compiling the OpenOCD source code. That file is provided by default for all GNU autotools packages. If you are not familiar with the GNU autotools, then you should read those instructions first. @@ -204,8 +194,7 @@ the GNU autotools, then you should read those instructions first. The remainder of this document tries to provide some instructions for those looking for a quick-install. -OpenOCD Dependencies --------------------- +## OpenOCD Dependencies GCC or Clang is currently required to build OpenOCD. The developers have begun to enforce strict code warnings (-Wall, -Werror, -Wextra, @@ -250,8 +239,7 @@ Optional development script checkpatch needs: - python - python-ply -Permissions delegation ----------------------- +## Permissions delegation Running OpenOCD with root/administrative permissions is strongly discouraged for security reasons. @@ -268,89 +256,81 @@ For parport adapters on Windows you need to run install_giveio.bat (it's also possible to use "ioperm" with Cygwin instead) to give ordinary users permissions for accessing the "LPT" registers directly. -Compiling OpenOCD ------------------ +## Compiling OpenOCD To build OpenOCD, use the following sequence of commands: - ./bootstrap (when building from the git repository) - ./configure [options] - make - sudo make install + ./bootstrap + ./configure [options] + make + sudo make install -The 'configure' step generates the Makefiles required to build +The `bootstrap` command is only necessary when building from the Git repository. The `configure` step generates the Makefiles required to build OpenOCD, usually with one or more options provided to it. The first 'make' step will build OpenOCD and place the final executable in -'./src/'. The final (optional) step, ``make install'', places all of +'./src/'. The final (optional) step, `make install`, places all of the files in the required location. -To see the list of all the supported options, run - ./configure --help +To see the list of all the supported options, run `./configure --help` -Cross-compiling Options ------------------------ +## Cross-compiling Options Cross-compiling is supported the standard autotools way, you just need to specify the cross-compiling target triplet in the --host option, e.g. for cross-building for Windows 32-bit with MinGW on Debian: - ./configure --host=i686-w64-mingw32 [options] + ./configure --host=i686-w64-mingw32 [options] To make pkg-config work nicely for cross-compiling, you might need an additional wrapper script as described at - https://autotools.io/pkgconfig/cross-compiling.html + https://autotools.io/pkgconfig/cross-compiling.html This is needed to tell pkg-config where to look for the target libraries that OpenOCD depends on. Alternatively, you can specify -*_CFLAGS and *_LIBS environment variables directly, see "./configure ---help" for the details. +`*_CFLAGS` and `*_LIBS` environment variables directly, see `./configure +--help` for the details. For a more or less complete script that does all this for you, see - contrib/cross-build.sh + contrib/cross-build.sh -Parallel Port Dongles ---------------------- +## Parallel Port Dongles If you want to access the parallel port using the PPDEV interface you -have to specify both --enable-parport AND --enable-parport-ppdev, since +have to specify both `--enable-parport` and `--enable-parport-ppdev`, since the later option is an option to the parport driver. -The same is true for the --enable-parport-giveio option, you have to -use both the --enable-parport AND the --enable-parport-giveio option +The same is true for the `--enable-parport-giveio` option, you have to +use both the `--enable-parport` and the `--enable-parport-giveio` option if you want to use giveio instead of ioperm parallel port access method. -========================== -Obtaining OpenOCD From GIT -========================== +# Obtaining OpenOCD From GIT You can download the current GIT version with a GIT client of your choice from the main repository: - git://git.code.sf.net/p/openocd/code + git://git.code.sf.net/p/openocd/code You may prefer to use a mirror: - http://repo.or.cz/r/openocd.git - git://repo.or.cz/openocd.git + http://repo.or.cz/r/openocd.git + git://repo.or.cz/openocd.git Using the GIT command line client, you might use the following command to set up a local copy of the current repository (make sure there is no directory called "openocd" in the current directory): - git clone git://git.code.sf.net/p/openocd/code openocd - -Then you can update that at your convenience using + git clone git://git.code.sf.net/p/openocd/code openocd - git pull +Then you can update that at your convenience using `git pull`. There is also a gitweb interface, which you can use either to browse the repository or to download arbitrary snapshots using HTTP: - http://repo.or.cz/w/openocd.git + http://repo.or.cz/w/openocd.git Snapshots are compressed tarballs of the source tree, about 1.3 MBytes each at this writing.