Skip to content

Latest commit

 

History

History
262 lines (199 loc) · 8.15 KB

README.md

File metadata and controls

262 lines (199 loc) · 8.15 KB
Raw

remote_serial

License

This is an ultimate implementation of serial line interface for ROS2.

It provides ROS2 interfaces for inter-process access, introspection and debugging. It performs wisely in case of serial line saturation in any of the I/O directions, minimizing data loses and blocking behavior, ensuring optimum performance.

This package implements a generic purpose serial port driver using character device files. However this package also implements most of the logic required for other serial line drivers (see the "Examples" section below).

ROS2 interfaces

Parameters

All classes:

  • serial_prefix: the prefix to ROS2 interfaces exposed by this driver ("/serial/<node-name>" by default)

The factory class:

  • serial_is_remote: instructs whether to instantiate the driver locally or to connect to a remote instance ("true" by default)

Serial port driver:

  • serial_dev_name: the character device path ("/dev/ttyS0" by default)
  • serial port settings:
    • serial_skip_init: skip the port initialization (ignore the below parameters)
    • serial_baud_rate: baud rate ("115200" by default)
    • serial_data: data bits ("8" by default)
    • serial_parity: parity bit ("false" by default)
    • serial_stop: stop bits ("1" by default)
    • serial_flow_control: hardware flow control ("false" by default)
    • serial_sw_flow_control: software flow control ("false" by default)
    • serial_bs: the size of read buffer ("1024" by default)

Topics

Subscribers

  • <namespace>/<serial_prefix>/inject/input: injects the given bytes into the serial line as if it was written to the line by the driver
  • <namespace>/<serial_prefix>/inject/output: injects the given bytes into the serial line as if it was received by the driver from the line

Publishers

  • <namespace>/<serial_prefix>/inspect/input: publishes data received by the driver from the line
  • <namespace>/<serial_prefix>/inspect/output: publishes data sent by the driver to the line

Basic setup

Launch it as a separate node for each serial port:

$ ros2 run remote_serial remote_serial_standalone

or

$ ros2 run remote_serial remote_serial_standalone \
  --ros-args \
  --remap serial:__node:=serial_com1 \
  -p serial_is_remote:=false \
  -p serial_prefix:=/serial/com1 \
  -p serial_dev_name:=/dev/ttyS0 \
  -p serial_baud_rate:=115200 \
  -p serial_data:=8 \
  -p serial_parity:=false \
  -p serial_stop:=1 \
  -p serial_flow_control:=true

flowchart TB
    cli["<p style='text-align:left'>$ ros2 topic echo /serial/com1/inspect/input\n$ ros2 topic echo /serial/com1/inspect/output\n$ ros2 topic pub /serial/com1/inject/output \\n&nbsp;&nbsp;&nbsp;std_msgs/msg/UInt8MultiArray {'data':'ATH+CHUP\r\ n'}</p>"] -. "DDS" .-> topic_serial[/ROS2 interfaces:\n/serial/com1/.../]
    app["Your process"] -- "DDS\n(with context switch)" --> topic_serial
    subgraph serial["Process: remote_serial_standalone"]
      topic_serial --> driver["Serial port driver"]
    end
    driver --> file{{"Character device: /dev/ttyS0"}}
Loading

Advanced setup

The more advanced setup is to initialize it as a separate node in the very executable which will be communicating with the port all the time (e.g. a MODBUS RTU implementation).

This setup allows DDS to forward the messages between nodes without context switches should your DDS implementation support that. See an example of such a setup in the Modbus RTU package:

flowchart TB
    cli_serial["<p style='text-align:left'># Serial debugging and troubleshooting\n$ ros2 topic echo /serial/inspect/input\n...</p>"] -. "DDS" ..-> topic_serial[/ROS2 interfaces:\n/serial/.../]
    subgraph modbus_exe["Your process"]
      subgraph serial["Library: remote_serial"]
        topic_serial --> driver["Serial port driver"]
      end
      code["Your code"] -- "DDS\n(potentially without\ncontext switch)" --> topic_serial
      code -- "or native API calls" ---> driver
      driver --> file{{"Character device"}}
    end
Loading

Implementation details

The following diagram shows the high level view on the internals of this package:

flowchart TB
    owner["Native API"]
    external["ROS2 Interface API"]

    subgraph node["remote_serial::Node"]

      subgraph interface_ros2["remote_serial::Interface"]
        subgraph topics["Topics: /serial"]
          published_input[//inspect/input/]
          published_output[//inspect/output/]
        end

        subgraph services["Services: /serial"]
          service_send[//inject/output/]
          service_recv[//inject/input/]
        end
      end

      subgraph worker["remote_serial::Port"]
        output_queue["Output Queue"]
        thread["Worker thread\nrunning select()"]

        subgraph interface_native["remote_serial::Implementation"]
          subgraph register_input_cb["register_input_cb()"]
            input_cb["input_cb()"]
          end
          output("output()")
        end

        fd["File Descriptor"]
      end

    end
    file{{"Character device"}}

    %% owner -- "Constructor\nwith parameters" ----> node
    owner --> output --> output_queue
    %% owner --> register_input_cb

    external .-> published_input
    external .-> published_output
    external .-> service_send
    external .-> service_recv

    service_recv --> published_input
    service_recv --> input_cb

    service_send --> output_queue
    output_queue --> thread
    thread --> published_input
    thread --> published_output
    thread ---> input_cb --> owner

    file -- "input" ---> fd -- "input" ----> thread
    thread -- "output" --> fd -- "output" --> file
Loading

Implementing serial line drivers

The serial line drivers implement the base class provided by this package. For C++ drivers, that means that they use remote_serial::Implementation as a parent class. Its constructor requires an instance of rclcpp::Node to read the parameters from.

Note: There can be more than one instance of `remote_serial::Implementation` per node. However they will all be controlled by the same parameters. Though the default value of the parameter `serial_prefix` can be passed into each individual constructor which is sufficient for common use cases.

The following methods need to be implemented by each driver:

public:
  // output writes bytes to the serial line
  virtual void output(const std::string &) override;

  // register_input_cb is used to set the callback function which
  // is called every time data is received from the serial line
  virtual void register_input_cb(void (*)(const std::string &msg,
                                          void *user_data),
                                 void *user_data) override;

The users can chose one of three ways to interact with child classes of remote_serial::Implementation:

  • Link with the driver directly to make native API calls:

    auto serial = \
  std::make_shared<driver_package::DriverClass>(node, "/serial");
serial->output("ATH+CHUP\r\n");

    In this case the driver is running within the same process and it is destroyed when the serial object is destroyed.

  • Link with remote_serial to make ROS2 interface (DDS) calls (locally or over a network):

    auto serial = \
  std::make_shared<remote_serial::RemoteInterface>(node, "/serial");
serial->output("ATH+CHUP\r\n");

    In this case the driver can be elsewhere within DDS' reach (same process or another side of the globe).

  • Let the runtime make the choice between the above two options:

    auto serial = \
  remote_serial::Factory::New(node, "/serial");
// or
auto serial = \
  driver_package::Factory::New(node, "/serial");

    In this case the boolean value of the parameter serial_is_remote determines whether the driver is instantiated locally or if a remote interface is used to reach the driver instantiated elsewhere. Please, note, the trivial class driver_package::Factory (similar to remote_serial::Factory) has to be written to support this use case.

Examples

remote_microcontroller

See the UART implementation in remote_microcontroller for an example of a driver that implements remote_serial.