We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Maintainer: common packages maintainers Environment: ARMv8 Processor rev 0, Bananapi BPI-R4, OpenWrt 24.10.0-rc2 r28161-ea17e958b9
Description:
Use luci nut panel to create /etc/config/nut_server file. Try to start nut-server without success.
After some investigation, found that the driver option in config file nut_server was not properly written.
Luci give this driver option /lib/nut/usbhid-ups and send this to the file.
After change the config file manualy from option driver '/lib/nut/usbhid-ups' to option driver 'usbhid-ups' erverything work as expected.
Salutations.
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Maintainer: common packages maintainers
Environment: ARMv8 Processor rev 0, Bananapi BPI-R4, OpenWrt 24.10.0-rc2 r28161-ea17e958b9
Description:
Use luci nut panel to create /etc/config/nut_server file. Try to start nut-server without success.
After some investigation, found that the driver option in config file nut_server was not properly written.
Luci give this driver option /lib/nut/usbhid-ups and send this to the file.
After change the config file manualy from
option driver '/lib/nut/usbhid-ups'
to
option driver 'usbhid-ups'
erverything work as expected.
Salutations.
The text was updated successfully, but these errors were encountered: