MSI package UI shows "Install" upon uninstallation

[mindonwarp]

Hi everyone,

I've noticed that the MSI package's UI has "Install" as caption on the "Install" button even during uninstallation. When I open up the "installed apps" and right-click -> uninstall on a program installed with a WiX bundle, the first dialog correctly shows "Uninstall", but when I click on uninstall the next dialog that pops up (the one from the MSI) looks exactly like the install version of it.

The UI wxs is the same one from github (WixUI_InstallDir), minus the License Agreement.

What am I doing wrong?
Thanks

[ag-ctlg]

Any progress on this?

[bevanweiss]

You're probably going to have to provide a screenshot showing which button you mean.
And the wxs that you're using for your dialog controls. I'd say the button on that dialog isn't conditional around Install / Uninstall.

Since you mention 'Install' then it's probably the English language that you're using, so the various strings can be found here:
https://github.com/wixtoolset/wix/blob/main/src/ext/UI/wixlib/WixUI_en-us.wxl

[ag-ctlg]

Hi, thanks for the reply! Here are the screenshots and the wxs file:

     <Property Id="DefaultUIFont" Value="WixUI_Font_Normal" />
     <Property Id="WixUI_Mode" Value="InstallDir" />

     <DialogRef Id="BrowseDlg" />
     <DialogRef Id="DiskCostDlg" />
     <DialogRef Id="ErrorDlg" />
     <DialogRef Id="FatalError" />
     <DialogRef Id="FilesInUse" />
     <DialogRef Id="MsiRMFilesInUse" />
     <DialogRef Id="PrepareDlg" />
     <DialogRef Id="ProgressDlg" />
     <DialogRef Id="ResumeDlg" />
     <DialogRef Id="UserExit" />

     <Publish Dialog="BrowseDlg" Control="OK" Event="DoAction" Value="WixUIValidatePath_$(sys.BUILDARCHSHORT)" Order="3" />
     <Publish Dialog="BrowseDlg" Control="OK" Event="SpawnDialog" Value="InvalidDirDlg" Order="4" Condition="NOT WIXUI_DONTVALIDATEPATH AND WIXUI_INSTALLDIR_VALID&lt;&gt;&quot;1&quot;" />

     <Publish Dialog="ExitDialog" Control="Finish" Event="EndDialog" Value="Return" Order="999" />

     <Publish Dialog="WelcomeDlg" Control="Next" Event="NewDialog" Value="InstallDirDlg" Condition="NOT Installed" />
     <Publish Dialog="WelcomeDlg" Control="Next" Event="NewDialog" Value="VerifyReadyDlg" Condition="Installed AND PATCH" />

     <Publish Dialog="InstallDirDlg" Control="Back" Event="NewDialog" Value="WelcomeDlg" />
     <Publish Dialog="InstallDirDlg" Control="Next" Event="SetTargetPath" Value="[WIXUI_INSTALLDIR]" Order="1" />
     <Publish Dialog="InstallDirDlg" Control="Next" Event="DoAction" Value="WixUIValidatePath_$(sys.BUILDARCHSHORT)" Order="2" Condition="NOT WIXUI_DONTVALIDATEPATH" />
     <Publish Dialog="InstallDirDlg" Control="Next" Event="SpawnDialog" Value="InvalidDirDlg" Order="3" Condition="NOT WIXUI_DONTVALIDATEPATH AND WIXUI_INSTALLDIR_VALID&lt;&gt;&quot;1&quot;" />
     <Publish Dialog="InstallDirDlg" Control="Next" Event="NewDialog" Value="VerifyReadyDlg" Order="4" Condition="WIXUI_DONTVALIDATEPATH OR WIXUI_INSTALLDIR_VALID=&quot;1&quot;" />
     <Publish Dialog="InstallDirDlg" Control="ChangeFolder" Property="_BrowseProperty" Value="[WIXUI_INSTALLDIR]" Order="1" />
     <Publish Dialog="InstallDirDlg" Control="ChangeFolder" Event="SpawnDialog" Value="BrowseDlg" Order="2" />

     <Publish Dialog="VerifyReadyDlg" Control="Back" Event="NewDialog" Value="InstallDirDlg" Order="1" Condition="NOT Installed" />
     <Publish Dialog="VerifyReadyDlg" Control="Back" Event="NewDialog" Value="MaintenanceTypeDlg" Order="2" Condition="Installed AND NOT PATCH" />
     <Publish Dialog="VerifyReadyDlg" Control="Back" Event="NewDialog" Value="WelcomeDlg" Order="2" Condition="Installed AND PATCH" />

     <Publish Dialog="MaintenanceWelcomeDlg" Control="Next" Event="NewDialog" Value="MaintenanceTypeDlg" />

     <Publish Dialog="MaintenanceTypeDlg" Control="RepairButton" Event="NewDialog" Value="VerifyReadyDlg" />
     <Publish Dialog="MaintenanceTypeDlg" Control="RemoveButton" Event="NewDialog" Value="VerifyReadyDlg" />
     <Publish Dialog="MaintenanceTypeDlg" Control="Back" Event="NewDialog" Value="MaintenanceWelcomeDlg" />

     <Property Id="ARPNOMODIFY" Value="1" />
  </UI>

  <UIRef Id="WixUI_Common" />

[bevanweiss]

That looks like the Resume Dialog, it's more for if a setup was 'interrupted', like if a restart was needed or something similar.

I would have expected on Uninstall for it to enter at the MaintenanceWelcomeDlg, and then to proceed to the MaintenanceTypeDlg before then proceeding to the VerifyReadyDlg.

What version of the WiX Toolset are you using?
If you have either VerifyReadyDlg.wxs or ResumeDlg.wxs files in your project, you should paste them here.

[ag-ctlg]

I would expect the same and that's what confuses me. WiX version is 4.0.5 at the moment.
We don't have any other custom UI wxs files.

When I look at the log file, the first few lines look like this:

MSI (c) (F0:DC) [07:59:30:926]: Note: 1: 2205 2: 3: PatchPackage
MSI (c) (F0:DC) [07:59:30:926]: Machine policy value 'DisableRollback' is 0
MSI (c) (F0:DC) [07:59:30:926]: User policy value 'DisableRollback' is 0
MSI (c) (F0:DC) [07:59:30:926]: PROPERTY CHANGE: Adding UILevel property. Its value is '5'.
MSI (c) (F0:DC) [07:59:30:926]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (c) (F0:DC) [07:59:30:926]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
MSI (c) (F0:DC) [07:59:30:926]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (c) (F0:DC) [07:59:30:926]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (c) (F0:DC) [07:59:30:926]: Doing action: INSTALL
Action 7:59:30: INSTALL.
Action start 7:59:30: INSTALL.
MSI (c) (F0:DC) [07:59:30:926]: UI Sequence table 'InstallUISequence' is present and populated.
MSI (c) (F0:DC) [07:59:30:926]: Running UISequence
MSI (c) (F0:DC) [07:59:30:926]: PROPERTY CHANGE: Adding EXECUTEACTION property. Its value is 'INSTALL'.

Is it normal for it to start the INSTALL action? Later on in the log I see the ResumeDlg starting.
It does perform an uninstall in the end, but the dialog shows "Install".

Oh and btw, the process starts from the setup bundle, not the MSI. When I start the MSI I get the "change/repair/remove" dialog.
However, the MSI is never shipped alone because there are prerequisites that need to be pre-installed, thus the bundle.

[ahodzic80]

Did you ever get this resolved? I am also facing the same problem.

[ag-ctlg]

Did you ever get this resolved? I am also facing the same problem.

No, still open.

[bevan-howie]

Same problem here.

[HubbaBob]

We have the exact same problem: Setupbundle installing an MSI (which installs a service)
When running uninstall from add/remove or direclty from the bundle it shows the resume/install dialog. Continuing anyway actually uninstalls the application, but the install dlgs are very confusing.

Using wix 4.0.5