pio_jtag.c

#include <hardware/clocks.h>
#include "hardware/dma.h"
#include "dirtyJtagConfig.h"
#include "pio_jtag.h"
#include "jtag.pio.h"

void jtag_task();//to process USB OUT packets while waiting for DMA to finish

#define DMA

#if 0
static bool pins_source = false; //false: PIO, true: GPIO

static void switch_pins_source(const pio_jtag_inst_t *jtag, bool gpio)
{
    if (pins_source != gpio)
    {
        if (gpio)
        {
            gpio_put(jtag->pin_tdi, gpio_get(jtag->pin_tdi));
            gpio_set_function(jtag->pin_tdi, GPIO_FUNC_SIO);
            gpio_put(jtag->pin_tck, gpio_get(jtag->pin_tck));
            gpio_set_function(jtag->pin_tck, GPIO_FUNC_SIO);
            gpio_set_dir_out_masked((1 << jtag->pin_tdi) | (1 << jtag->pin_tck));
        }
        else
        {
            gpio_set_function(jtag->pin_tdi, GPIO_FUNC_PIO0);
            gpio_set_function(jtag->pin_tck, GPIO_FUNC_PIO0);
        }
        pins_source = gpio;
    }
}
#endif



#ifdef DMA

static int tx_dma_chan = -1;
static int rx_dma_chan;
static dma_channel_config tx_c;
static dma_channel_config rx_c;
#endif

void dma_init()
{
#ifdef DMA
    if (tx_dma_chan == -1)
    {
        // Configure a channel to write a buffer to PIO0
        // SM0's TX FIFO, paced by the data request signal from that peripheral.
        tx_dma_chan = dma_claim_unused_channel(true);
        tx_c = dma_channel_get_default_config(tx_dma_chan);
        channel_config_set_transfer_data_size(&tx_c, DMA_SIZE_8);
        channel_config_set_read_increment(&tx_c, true);
        channel_config_set_dreq(&tx_c, DREQ_PIO0_TX0);
            dma_channel_configure(
            tx_dma_chan,
            &tx_c,
            &pio0_hw->txf[0], // Write address (only need to set this once)
            NULL,             // Don't provide a read address yet
            0,                // Don't provide the count yet
            false             // Don't start yet
        );
        // Configure a channel to read a buffer from PIO0
        // SM0's RX FIFO, paced by the data request signal from that peripheral.
        rx_dma_chan = dma_claim_unused_channel(true);
        rx_c = dma_channel_get_default_config(rx_dma_chan);
        channel_config_set_transfer_data_size(&rx_c, DMA_SIZE_8);
        channel_config_set_write_increment(&rx_c, false);
        channel_config_set_read_increment(&rx_c, false);
        channel_config_set_dreq(&rx_c, DREQ_PIO0_RX0);
        dma_channel_configure(
            rx_dma_chan,
            &rx_c,
            NULL,             // Dont provide a write address yet
            &pio0_hw->rxf[0], // Read address (only need to set this once)
            0,                // Don't provide the count yet
            false             // Don't start yet
            );
    }
#endif

}


void __time_critical_func(pio_jtag_write_blocking)(const pio_jtag_inst_t *jtag, const uint8_t *bsrc, size_t len) 
{
    size_t byte_length = (len+7 >> 3);
    size_t last_shift = ((byte_length << 3) - len);
    size_t tx_remain = byte_length, rx_remain = last_shift ? byte_length : byte_length+1;
    io_rw_8 *txfifo = (io_rw_8 *) &jtag->pio->txf[jtag->sm];
    io_rw_8 *rxfifo = (io_rw_8 *) &jtag->pio->rxf[jtag->sm];
    uint8_t x; // scratch local to receive data
    //kick off the process by sending the len to the tx pipeline
    *(io_rw_32*)txfifo = len-1;
#ifdef DMA
    if (byte_length > 4)
    {
        dma_init();
        channel_config_set_read_increment(&tx_c, true);
        channel_config_set_write_increment(&rx_c, false);
        dma_channel_set_config(rx_dma_chan, &rx_c, false);
        dma_channel_set_config(tx_dma_chan, &tx_c, false);
        dma_channel_transfer_to_buffer_now(rx_dma_chan, (void*)&x, rx_remain);
        dma_channel_transfer_from_buffer_now(tx_dma_chan, (void*)bsrc, tx_remain);
        while (dma_channel_is_busy(rx_dma_chan))
        {
            jtag_task();
            tight_loop_contents();
        }
        // stop the compiler hoisting a non volatile buffer access above the DMA completion.
        __compiler_memory_barrier();
    }
    else
#endif
    {
        while (tx_remain || rx_remain) 
        {
            if (tx_remain && !pio_sm_is_tx_fifo_full(jtag->pio, jtag->sm))
            {
                *txfifo = *bsrc++;
                --tx_remain;
            }
            if (rx_remain && !pio_sm_is_rx_fifo_empty(jtag->pio, jtag->sm))
            {
                x = *rxfifo;
                --rx_remain;
            }
        }
    }
}

void __time_critical_func(pio_jtag_write_read_blocking)(const pio_jtag_inst_t *jtag, const uint8_t *bsrc, uint8_t *bdst,
                                                         size_t len) 
{
    size_t byte_length = (len+7 >> 3);
    size_t last_shift = ((byte_length << 3) - len);
    size_t tx_remain = byte_length, rx_remain = last_shift ? byte_length : byte_length+1;
    uint8_t* rx_last_byte_p = &bdst[byte_length-1];
    io_rw_8 *txfifo = (io_rw_8 *) &jtag->pio->txf[jtag->sm];
    io_rw_8 *rxfifo = (io_rw_8 *) &jtag->pio->rxf[jtag->sm];
    //kick off the process by sending the len to the tx pipeline
    *(io_rw_32*)txfifo = len-1;
#ifdef DMA
    if (byte_length > 4)
    {
        dma_init();
        channel_config_set_read_increment(&tx_c, true);
        channel_config_set_write_increment(&rx_c, true);
        dma_channel_set_config(rx_dma_chan, &rx_c, false);
        dma_channel_set_config(tx_dma_chan, &tx_c, false);
        dma_channel_transfer_to_buffer_now(rx_dma_chan, (void*)bdst, rx_remain);
        dma_channel_transfer_from_buffer_now(tx_dma_chan, (void*)bsrc, tx_remain);
        while (dma_channel_is_busy(rx_dma_chan))
        {
            jtag_task();
            tight_loop_contents();
        }
        // stop the compiler hoisting a non volatile buffer access above the DMA completion.
        __compiler_memory_barrier();
    }
    else
#endif
    {
        while (tx_remain || rx_remain) 
        {
            if (tx_remain && !pio_sm_is_tx_fifo_full(jtag->pio, jtag->sm))
            {
                *txfifo = *bsrc++;
                --tx_remain;
            }
            if (rx_remain && !pio_sm_is_rx_fifo_empty(jtag->pio, jtag->sm))
            {
                *bdst++ = *rxfifo;
                --rx_remain;
            }
        }
    }
    //fix the last byte
    if (last_shift) 
    {
        *rx_last_byte_p = *rx_last_byte_p << last_shift;
    }
}

uint8_t __time_critical_func(pio_jtag_write_tms_blocking)(const pio_jtag_inst_t *jtag, bool tdi, bool tms, size_t len)
{
    size_t byte_length = (len+7 >> 3);
    size_t last_shift = ((byte_length << 3) - len);
    size_t tx_remain = byte_length, rx_remain = last_shift ? byte_length : byte_length+1;
    io_rw_8 *txfifo = (io_rw_8 *) &jtag->pio->txf[jtag->sm];
    io_rw_8 *rxfifo = (io_rw_8 *) &jtag->pio->rxf[jtag->sm];
    uint8_t x; // scratch local to receive data
    uint8_t tdi_word = tdi ? 0xFF : 0x0;
    gpio_put(jtag->pin_tms, tms);
    //kick off the process by sending the len to the tx pipeline
    *(io_rw_32*)txfifo = len-1;
#ifdef DMA
    if (byte_length > 4)
    {   
        dma_init();
        channel_config_set_read_increment(&tx_c, false);
        channel_config_set_write_increment(&rx_c, false);
        dma_channel_set_config(rx_dma_chan, &rx_c, false);
        dma_channel_set_config(tx_dma_chan, &tx_c, false);
        dma_channel_transfer_to_buffer_now(rx_dma_chan, (void*)&x, rx_remain);
        dma_channel_transfer_from_buffer_now(tx_dma_chan, (void*)&tdi_word, tx_remain);
        while (dma_channel_is_busy(rx_dma_chan))
        {
            jtag_task();
            tight_loop_contents();
        }
        // stop the compiler hoisting a non volatile buffer access above the DMA completion.
        __compiler_memory_barrier();
    }
    else
#endif
    {
        while (tx_remain || rx_remain) 
        {
            if (tx_remain && !pio_sm_is_tx_fifo_full(jtag->pio, jtag->sm)) 
            {
                *txfifo = tdi_word;
                --tx_remain;
            }
            if (rx_remain && !pio_sm_is_rx_fifo_empty(jtag->pio, jtag->sm)) 
            {
                x = *rxfifo;
                --rx_remain;
            }
        }
    }
    //fix the last byte
    if (last_shift)
    {
        x = x << last_shift;
    }
    return x;
}

static void init_pins(uint pin_tck, uint pin_tdi, uint pin_tdo, uint pin_tms, uint pin_rst, uint pin_trst)
{
    #if !( BOARD_TYPE == BOARD_QMTECH_RP2040_DAUGHTERBOARD )
    // emulate open drain with pull up and direction
    gpio_pull_up(pin_rst);
    gpio_clr_mask((1u << pin_tms) | (1u << pin_rst) | (1u << pin_trst));
    gpio_init_mask((1u << pin_tms) | (1u << pin_rst) | (1u << pin_trst));
    gpio_set_dir_masked( (1u << pin_tms) | (1u << pin_trst), 0xffffffffu);
    gpio_set_dir(pin_rst, false);
    #else
    gpio_clr_mask((1u << pin_tms));
    gpio_init_mask((1u << pin_tms));
    gpio_set_dir_masked( (1u << pin_tms), 0xffffffffu);
    #endif
}

void init_jtag(pio_jtag_inst_t* jtag, uint freq, uint pin_tck, uint pin_tdi, uint pin_tdo, uint pin_tms, uint pin_rst, uint pin_trst)
{
    init_pins(pin_tck, pin_tdi, pin_tdo, pin_tms, pin_rst, pin_trst);
    jtag->pin_tdi = pin_tdi;
    jtag->pin_tdo = pin_tdo;
    jtag->pin_tck = pin_tck;
    jtag->pin_tms = pin_tms;
    #if !( BOARD_TYPE == BOARD_QMTECH_RP2040_DAUGHTERBOARD )
    jtag->pin_rst = pin_rst;
    jtag->pin_trst = pin_trst;
    #endif
    uint16_t clkdiv = 31;  // around 1 MHz @ 125MHz clk_sys
    pio_jtag_init(jtag->pio, jtag->sm,
                    clkdiv,
                    pin_tck,
                    pin_tdi,
                    pin_tdo
                 );

    jtag_set_clk_freq(jtag, freq);
}

void jtag_set_clk_freq(const pio_jtag_inst_t *jtag, uint freq_khz) {
    uint clk_sys_freq_khz = clock_get_hz(clk_sys) / 1000;
    uint32_t divider = (clk_sys_freq_khz / freq_khz) / 4;
    divider = (divider < 2) ? 2 : divider; //max reliable freq 
    pio_sm_set_clkdiv_int_frac(pio0, jtag->sm, divider, 0);
}

void jtag_transfer(const pio_jtag_inst_t *jtag, uint32_t length, const uint8_t* in, uint8_t* out)
{
    /* set tms to low */
    jtag_set_tms(jtag, false);

    if (out)
        pio_jtag_write_read_blocking(jtag, in, out, length);
    else
        pio_jtag_write_blocking(jtag, in, length);

}

uint8_t jtag_strobe(const pio_jtag_inst_t *jtag, uint32_t length, bool tms, bool tdi)
{
    return pio_jtag_write_tms_blocking(jtag, tdi, tms, length);
}



static uint8_t toggle_bits_out_buffer[4];
static uint8_t toggle_bits_in_buffer[4];

void jtag_set_tdi(const pio_jtag_inst_t *jtag, bool value)
{
    toggle_bits_out_buffer[0] = value ? 1u << 7 : 0;
}

void jtag_set_clk(const pio_jtag_inst_t *jtag, bool value)
{
    if (value)
    {
        toggle_bits_in_buffer[0] = 0; 
        pio_jtag_write_read_blocking(jtag, toggle_bits_out_buffer, toggle_bits_in_buffer, 1);
    }
}

bool jtag_get_tdo(const pio_jtag_inst_t *jtag)
{
    return !! toggle_bits_in_buffer[0];
}