zero2w.nix

{
  lib,
  modulesPath,
  pkgs,
  ...
}: {
  imports = [
    ./sd-image.nix
  ];

  # Some packages (ahci fail... this bypasses that) https://discourse.nixos.org/t/does-pkgs-linuxpackages-rpi3-build-all-required-kernel-modules/42509
  nixpkgs.overlays = [
    (final: super: {
      makeModulesClosure = x:
        super.makeModulesClosure (x // { allowMissing = true; });
    })
  ];

  nixpkgs.hostPlatform = "aarch64-linux";
  # ! Need a trusted user for deploy-rs.
  nix.settings.trusted-users = ["@wheel"];
  system.stateVersion = "24.05";

  zramSwap = {
    enable = true;
    algorithm = "zstd";
  };

  sdImage = {
    # bzip2 compression takes loads of time with emulation, skip it. Enable this if you're low on space.
    compressImage = false;
    imageName = "zero2.img";

    extraFirmwareConfig = {
      # Give up VRAM for more Free System Memory
      # - Disable camera which automatically reserves 128MB VRAM
      start_x = 0;
      # - Reduce allocation of VRAM to 16MB minimum for non-rotated (32MB for rotated)
      gpu_mem = 16;

      # Configure display to 800x600 so it fits on most screens
      # * See: https://elinux.org/RPi_Configuration
      hdmi_group = 2;
      hdmi_mode = 8;
    };
  };

  # Keep this to make sure wifi works
  hardware.enableRedistributableFirmware = lib.mkForce false;
  hardware.firmware = [pkgs.raspberrypiWirelessFirmware];

  boot = {
    kernelPackages = pkgs.linuxPackages_rpi02w;

    initrd.availableKernelModules = ["xhci_pci" "usbhid" "usb_storage"];
    loader = {
      grub.enable = false;
      generic-extlinux-compatible.enable = true;
    };

    # Avoids warning: mdadm: Neither MAILADDR nor PROGRAM has been set. This will cause the `mdmon` service to crash.
    # See: https://github.com/NixOS/nixpkgs/issues/254807
    swraid.enable = lib.mkForce false;
  };

  networking = {
    interfaces."wlan0".useDHCP = true;
    wireless = {
      enable = true;
      interfaces = ["wlan0"];
      # ! Change the following to connect to your own network
      networks = {
        "<ssid>" = {
          psk = "<ssid-key>";
        };
      };
    };
  };

  # Enable OpenSSH out of the box.
  services.sshd.enable = true;

  # NTP time sync.
  services.timesyncd.enable = true;

  # ! Change the following configuration
  users.users.bob = {
    isNormalUser = true;
    home = "/home/bob";
    description = "Bob";
    extraGroups = ["wheel" "networkmanager"];
    # ! Be sure to put your own public key here
    openssh.authorizedKeys.keys = ["a public key"];
  };

  security.sudo = {
    enable = true;
    wheelNeedsPassword = false;
  };
  # ! Be sure to change the autologinUser.
  services.getty.autologinUser = "bob";
}