Skip to content

Latest commit

 

History

History
62 lines (55 loc) · 2.68 KB

VERSION.md

File metadata and controls

62 lines (55 loc) · 2.68 KB
Raw

Version History

v0.5.1 (BugFix)

  • BugFixes
    • Bugfix in mipi_csi2_s_stream. The system hung on stream start when stream was stopped twice before. This was especially the case when using
      v4l2-ctl --stream-mmap --stream-count=1.

v0.5.0 (V4L2 controls)

  • New Features
    • Trigger mode '0: disabled', '1: external', '2: pulsewidth', '3: self', '4: single', '5: sync', '6: stream_edge', '7: stream_level' can be set via V4L2 control 'trigger_mode'
    • Flash mode '0: disabled', '1: enabled' can be set via V4L2 control 'flash_mode'
    • Frame rate can be set via V4L2 control 'frame_rate' (except IMX412 and OV9281)
    • Black level can be set via V4L2 control 'black_level' (only IMX178, IMX183 and IMX296)
    • Single trigger can be set via V4L2 control 'single_trigger' (under development)
  • Removed Features
    • Removed device tree properties 'trigger_mode', 'flash_mode' and 'frame_rate'

v0.4.0 (Support all pixel formats)

  • Added support for VC MIPI Camera Modules
    • IMX183
    • IMX250, IMX252, IMX264, IMX265, IMX273, IMX392
    • IMX290, IMX327
    • IMX296
    • IMX412
    • IMX415
    • OV9281
  • New Features
    • Image Streaming in Y10, Y12, Y14, RG10, RG12, GB10, GB12 (2 bit right shifted)
    • Trigger mode '0: disabled', '1: external', '2: pulsewidth', '3: self', '4: single', '5: sync', '6: stream_edge', '7: stream_level' can be set via device tree property 'trigger_mode'
    • Flash mode '0: disabled', '1: enabled' can be set via device tree property 'flash_mode'
    • Frame rate can be set via device tree property 'frame_rate' (except IMX412 and OV9281)

v0.3.0 (Support IMX178)

  • New Features
    • Linux Kernel Version 5.4.129
    • Image Streaming in Y10-RAW format (4 bit left shifted)
    • Camera support for IMX178
    • Support for EXTERNAL trigger mode

v0.2.1 (BugFix)

  • BugFixes
    • Added missing include of SoC dtsi in apalis-imx8_vc_mipi_overlay.dts

v0.2.0 (Image streaming with 4 bit left shifted image)

  • New Features
    • Image Streaming in SGBRG10-RAW format (4 bit left shifted)
    • vcmipidemo supports software implementation to correct the 4 bit left shift

v0.1.0 (Pre version for demonstration only)

  • Supported boards
    • Toradex Ixora Carrier Board V1.2A
  • Supported cameras
    • VC MIPI IMX226 / VC MIPI IMX226C
  • Supported linux kernel versions
    • 5.4.115
  • New Features
    • Image streaming (with faulty pixel formating)
    • Exposure and Gain can addressed via V4L2 library
  • Known Issues
    • Image pixel formating does not work properly so far. This leads to an extrem noisy image
    • Trigger in and flash out not supported yet
    • Cropping not supported yet