CYD support (2.4+Capactive)

[Teapot321]

I would like you to add support for the new CYD.
I have this CYD and I can't figure out what it is.
It has a 2.4screen as well as a Capactive touch, ESP32-2432S024 is written on the back, this CYD has a Type-C port. It has pins (GND, O35, O22, O21) x2 as well as Bat+ Bat- and one I2C. The packaging said ESP32-2432S024C

[bmorcelli]

Do you have an example of project that uses this particular device?

[Teapot321]

A link to the demo firmware (sort of) https://github.com/NoosaHydro/2.4inch_ESP32-2432S024/blob/main/1-Demo/Demo_Arduino/1_2_Factory_samples_Capacitive_touch/Factory_samples_Capacitive_touch/Factory_samples_Capacitive_touch.ino

[Teapot321]

Here are the words of a person from a review on ALI:

Who will write the code, and not enjoy the built-in demo like an idiot. Touch CST820, screen ilI9341. NOT ilI9341_2!!!! The library for the CST820.h sensor is suitable for the TFT_eSPI screen. the User_config.ini file from the Chinese library does not need to be changed, it is in the capacitive version, in the resistive one. All the best, and success in development.

[Teapot321]

I just installed this project and it works https://github.com/elik745i/ESP32-2432s024c

[Teapot321]

Documentation from ali http://pan.jczn1688.com/directlink/1/ESP32%20module/2.4inch_ESP32-2432S024.zip
There are bin of demo

[bmorcelli]

I will take a look on that device after I:

• Finish T-embed CC1101 port (make CC1101 and PN532 work)... It will provoke a new release
• change ./core files to make new ports easy, by creating an interface structure

So it will take a good time and effort, but making integration easy for other people to work on new devices