-
Notifications
You must be signed in to change notification settings - Fork 15
Feature Testing
This page documents the feature testing done so far in Project Arlo features. The intention is just to describe the coverage of manual test cases that have been run so far, not necessarily to thoroughly document and provide evidence.
This section covers feature testing for the OpenConfig models supported in Project Arlo.
Date tested: 2019/07/23
Command | Description | Result | Notes |
---|---|---|---|
show platform |
Displays platform information about components like PSU, fans, and temperature sensors | ✔️ | |
show platform syseeprom |
Displays system eeprom information | ✔️ |
Date tested: 2019/07/23
REST paths tested using the Swagger UI
gNMI paths tested using gnmi-client CLI utility
Object | Attribute | REST Result | gNMI Result | Notes |
---|---|---|---|---|
components/component | empty | ✔️ | ||
components/component | removable | ✔️ | ||
components/component | name | ✔️ | ||
components/component | operstatus | ✔️ | ||
components/component | location | ✔️ | ||
components/component | id | ✔️ | ||
components/component | partno | ✔️ | ||
components/component | serialno | ✔️ | ||
components/component | mfgdate | ✔️ | ||
components/component | hardwareversion | ✔️ | ||
components/component | description | ✔️ | ||
components/component | mfgname | ✔️ | ||
components/component | software version | ✔️ |
Date tested: 2019/07/23
Command | Description | Result | Notes |
---|---|---|---|
show system |
Show system info hostname, currenttime, boottime | ✔️ | |
show system memory |
Show total/used memory info | ✔️ | |
show system cpu |
Show CPU usage (user/kernel/idle) percentages | ✔️ | |
show system processes |
Show all processes running in the host system | ✔️ | |
show system processes pid <pid> |
Show specific process information | ✔️ |
Date tested: 2019/07/23
REST paths tested using the Swagger UI
gNMI paths tested using gnmi-client CLI utility
Object | Attribute | REST Result | gNMI Result | Notes |
---|---|---|---|---|
system/state | empty | ✔️ | ||
system/state | hostname | ✔️ | ||
system/state | currentdatetime | ✔️ | ||
system/state | boottime | ✔️ | ||
system/memory | empty | ✔️ | ||
system/memory | physical | ✔️ | ||
system/memory | reserved | ✔️ | ||
system/cpus/state/[user/kernel/idle] | empty | ✔️ | ||
system/cpus/state/[user/kernel/idle] | instant | ❌ | Individual attributes not tested due to defect in translib | |
system/processes | ✔️ | |||
system/processes/<pid>/state | ✔️ | |||
system/processes/<pid>/state | Name | ✔️ | ||
system/processes/<pid>/state | starttime | ✔️ | ||
system/processes/<pid>/state | uptime | ✔️ | ||
system/processes/<pid>/state | cpu-usage-user | ✔️ | ||
system/processes/<pid>/state | cpu-usage-system | ✔️ | ||
system/processes/<pid>/state | memory-usage | ✔️ | ||
system/processes/<pid>/state | memory-utilization | ✔️ | ||
system/processes/<pid>/state | pid | ✔️ |
Date tested: 2019/07/23
Command | Description | Result | Notes |
---|---|---|---|
show interface status |
Status of all interfaces | ✔️ | - |
show interface counters |
Port-Statistics of all interfaces | ✔️ | - |
show interface Ethernet |
Description of all interfaces | ✔️ | - |
show interface Ethernet <id> |
Description of a specific interface | ✔️ | - |
description <string> |
Configure description for an interface | ✔️ | - |
no description |
Remove description | ✔️ | - |
shutdown |
Shuts down an interface | ✔️ | - |
no shutdown |
Configures admin-status as UP for an interface | ✔️ | - |
mtu <val> |
Configures MTU for an interface | ✔️ | - |
no mtu |
Resets MTU to 9100 for an interface | ✔️ | - |
ip address <ip-address with mask> |
Configures IPv4 address for an interface | ✔️ | - |
no ip address |
Removes IPv4 address for an interface | ✔️ | - |
ipv6 address |
Configures IPv6 address for an interface | ✔️ | - |
no ipv6 address |
Removes IPv6 address for an interface | ✔️ | - |
Date tested: 2019/07/23
REST paths tested using the Swagger UI
gNMI paths tested using gnmi-client CLI utility
Object | Attribute | REST Result | gNMI Result | Notes |
---|---|---|---|---|
/openconfig-interfaces:interfaces | Get Request | ✔️ | ✔️ | |
/openconfig-interfaces:interfaces/interface={name} | Get Request | ✔️ | ✔️ | |
/openconfig-interfaces:interfaces/interface={name}/config/ | description | ✔️ | ✔️ | |
/openconfig-interfaces:interfaces/interface={name}/config/enabled | enabled | ✔️ | ❌ | GNMI not tested |
/openconfig-interfaces:interfaces/interface={name}/config/mtu | mtu | ❌ | ❌ | Not supported get type |
/openconfig-interfaces:interfaces/interface={name}/subinterfaces/subinterface={index}/openconfig-if-ip:ipv4/addresses/address={ip} | ip | ✔️ | ❌ | GNMI not tested |
/openconfig-interfaces:interfaces/interface={name}/subinterfaces/subinterface={index}/openconfig-if-ip:ipv6/addresses/address={ip} | ip | ✔️ | ❌ | GNMI not tested |
Date tested: 2019/07/23
Command | Description | Result | Notes |
---|---|---|---|
ip access-list [ACL-table-name] |
Configures an IPv4 ACL | ✔️ | |
seq <id> { permit | deny } [ tcp ] [ src-prefix | any] { src-eq <src-port> } [ dst-prefix | any ] { dst-eq <dst-port> } { dscp <value> } |
Configures IPv4 ACL rule | ✔️ | |
show ip access-lists |
Displays all ACLs | ✔️ | |
show ip access-lists [ACL-table-name] |
Shows a specific IPv4 ACL | ✔️ | |
ip access-group [ACL-table-name] in |
Apply Ingress IPv4 access control list (ACL) to an interface | ✔️ | |
ip access-group [ACL-table-name] out |
Apply Egress IPv4 access control list (ACL) to an interface | ❌ | Config not seen in hardware |
show ip access-group |
Show IP access-group information | ✔️ | shows both ingress and egress config |
no ip access-group [ACL-table-name] out |
Remove Egress IPv4 access control list (ACL) from an interface | ❌ | Change not reflected hardware |
no ip access-group [ACL-table-name] in |
Remove Igress IPv4 access control list (ACL) from an interface | ❌ | Change not reflected in hardware |
no seq <id> |
Delete ACL rule | ✔️ | |
no ip access-list [ACL-table-name] |
Delete ACL table | ✔️ |
Date tested: 2019/07/23
REST paths tested using the Swagger UI
gNMI paths tested using gnmi-client CLI utility
Object | Attribute | Operation | REST Result | gNMI Result | Notes |
---|---|---|---|---|---|
openconfig-acl:acl | get all | ✔️ | ✔️ | testcase notes | |
openconfig-acl:acl/acl-sets | name,type | get specific ACL | ✔️ | ✔️ | testcase notes |
openconfig-acl:acl | configure ACL rules | ✔️ | ✔️ | ||
openconfig-acl:acl | delete all | ✔️ | ✔️ | testcase notes | |
openconfig-acl:acl | name,type | delete specific ACL rule | ✔️ | ✔️ |
Date tested:
Command | Description | Result | Notes |
---|---|---|---|
command |
commandDescription | ✔️ or ❌ | testcase notes |
comand |
commandDescription | ✔️ or ❌ | testcase notes |
Date tested:
REST paths tested using the Swagger UI
gNMI paths tested using gnmi-client CLI utility
Object | Attribute | REST Result | gNMI Result | Notes |
---|---|---|---|---|
object-path | attributeName | ✔️ or ❌ | ✔️ or ❌ | testcase notes |
object-path | attributeName | ✔️ or ❌ | ✔️ or ❌ | testcase notes |