Install.md

[点我查看中文版](Install.zh.md)  
  
# Content  
> * [Dependent Environments](#chapter-1)  
> * [Install develop environment for Tars](#chapter-2)  
> * [Initialize the db environment for Tars](#chapter-3)  
> * [Build runtime environment for Tars framework](#chapter-4)  

This document describes the steps to deploy, run, and test Tars framework.

If you use Tars for production environment, the deployment steps are similar, but you need pay attention to fault-tolerance. You can join us for discussion in the QQ group code 579079160.  
  
  
## 1. <a id="chapter-1"></a>Dependent environments  
  
Software | Software requirements  
------|--------  
linux kernel version: | 2.6.18 or later (Dependent OS)  
gcc version: | 4.8.2 or later、glibc-devel（Dependent c++ framework tools）  
bison version: | 2.5 or later（Dependent c++ framework tools）  
flex version: | 2.5 or later（Dependent c++ framework tools）  
cmake version: | 2.8.8 or later（Dependent c++ framework tools）  
mysql version: | 4.1.17 or later（dependency of framework running）  
rapidjson version: | 1.0.2 or later（dependency of C++ framework）  
nvm version: | 0.33.11 or later（Dependent web management system）  
node version: | 8.11.3 or later（Dependent web management system）  
  
Hardware requirements: a machine running Linux.  
  
### 1.1. Install glibc-devel  
  
If you don't have glibc, please install it first.  
  
For example, run this command in Centos:  
``` bash 
yum install glibc-devel  
```  
  
### 1.2. Install cmake  
  
Cmake is the tool for compile tars.  
  
Download cmake-2.8.8 source code, unzip:  
```  bash
tar zxvf cmake-2.8.8.tar.gz  
```  
Enter directory:  
```  bash
cd cmake-2.8.8  
```  
Steps as following(may `sudo root` first)  
```  bash
./bootstrap  
make  
make install  
```  
  
### 1.3. Install mysql  

There are two ways to install mysql. One is via source code and the other one is via yum. Both procedures are described below.

### 1.3.1 Install mysql via source code  
This step installs mysql via source code in order to set up configurations manually.  

Before installation, check whether ncurses and zlib have been installed. Execute these commands if not exist:  
```  bash
yum install ncurses-devel  
yum install zlib-devel  
```  
  
set the installation directory, switch to user root.  
```  bash
cd /usr/local  
mkdir mysql-5.6.26  
chown ${normal user}:${normal user} ./mysql-5.6.26  
ln -s /usr/local/mysql-5.6.26 /usr/local/mysql  
```  
  
Download mysql source (mysql-5.6.26), set charset to utf-8.  
```  bash
cd ${mysql_folder}  
wget https://dev.mysql.com/get/Downloads/MySQL-5.6/mysql-5.6.26.tar.gz  
tar -zxvf mysql-5.6.26.tar.gz  
cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql-5.6.26 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DMYSQL_USER=mysql -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci  
make  
make install  
```  
  
**Attention: If you use C++ to develop Tars service, please compile mysql as static library.**  
  
Now you can compile Tars framework of C++ version.  
  
If you need build runtime environment for Tars framework, pelease switch to mysql administrator user and config mysql with following steps:  
```bash  
yum install perl  
cd /usr/local/mysql  
useradd mysql  
rm -rf /usr/local/mysql/data  
mkdir -p /data/mysql-data  
ln -s /data/mysql-data /usr/local/mysql/data  
chown -R mysql:mysql /data/mysql-data /usr/local/mysql/data  
cp support-files/mysql.server /etc/init.d/mysql  
yum install -y perl-Module-Install.noarch  
perl scripts/mysql_install_db --user=mysql  
vim /usr/local/mysql/my.cnf  
```  
Here is an example of my.cnf:  
**Tips: As the system will load /etc/  
rm -rf /etc/my.cnf  
my.cnf first,you may delect the /etc/my.cnf or copy the essential information from the following example and paste to /ect/my.cnf. Otherwise it will not work.  
  
```bash  
[mysqld]  
  
# Remove leading # and set to the amount of RAM for the most important data  
# cache in mysql. Start at 70% of total RAM for dedicated server, else 10%.  
innodb_buffer_pool_size = 128M  
  
# Remove leading # to turn on a very important data integrity option: logging  
# changes to the binary log between backups.  
log_bin  
  
# These are commonly set, remove the # and set as required.  
basedir = /usr/local/mysql  
datadir = /usr/local/mysql/data  
# port = .....  
# server_id = .....  
socket = /tmp/mysql.sock  
  
bind-address=${your machine ip}  
  
# Remove leading # to set options mainly useful for reporting servers.  
# The server defaults are faster for transactions and fast SELECTs.  
# Adjust sizes as needed, experiment to find the optimal values.  
join_buffer_size = 128M  
sort_buffer_size = 2M  
read_rnd_buffer_size = 2M  
  
sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES  
  
```  
Start mysql  
```  sql
service mysql start  
chkconfig mysql on  
```  
Stop mysql  
``` sql
service mysql stop  
```  
Add mysql execution path to environment variable for path.  
``` bash 
vim /etc/profile  
PATH=$PATH:/usr/local/mysql/bin  
export PATH  
```  
Modify root's password  
```  bash
./bin/mysqladmin -u root password 'root@appinside'  
./bin/mysqladmin -u root -h ${hostname} password 'root@appinside'  
```  
  
  
Add mysql dynamic library path to environment variable for path.  
```  bash
vim /etc/ld.so.conf  
/usr/local/mysql/lib/  
ldconfig  
```  
========================  
  
The master-slave configuration for mysql can be found in the Internet.  
  
Grant authority to master  
```  sql
GRANT REPLICATION SLAVE ON *.* to 'mysql-sync'@'%' identified by 'sync@appinside'  
```  
Configure slave for replication:  
```  bash
change master to master_host='${slave Ip}',master_user='mysql-sync',master_password='sync@appinside' ,master_log_file='iZ94orl0ix4Z-bin.000004',master_log_pos=611;  
stop slave  
start slave  
show master status\G;  
show slave status\G;  
```  
  
### 1.3.2 Install mysql via yum  
This step allows you to download the mysql official yum repository.
  
The install scripts named mysql_install_db.sh included in version 5.6 have been deleted after version 5.7. Therefore, here comes the yum installation.  

The installation via yum is an easier way but with that you cannot adjust configs manually. If that is not what you want, the source code method is recommended.  

You can download mysql using wget. Below is an example downloading version 5.7, but you can change it to the desired version.
```  bash
wget -i -c http://dev.mysql.com/get/mysql57-community-release-el7-10.noarch.rpm  
yum -y install mysql57-community-release-el7-10.noarch.rpm  
yum -y install mysql-community-server  
yum -y install mysql-devel  
```  
If you have problems to install mysql with the above step, add the new mysql repository to local server with this yum command and then re-run the previous commands.  

```  bash
sudo yum localinstall https://dev.mysql.com/get/mysql57-community-release-el7-10.noarch.rpm  
```  
### 1.3.2.1 Configure mysql  

After installing mysql, start and check its status.  
  
```  sql
systemctl start mysqld.service  
systemctl status mysqld.service  
```  
  
mysql started and it's using port 3306 for the connection.  
  
Configure the mysql root password. mysql will generate a strong default password when it is started for the first time. The default password is shown in mysqld.log file. You can use the grep command below for showing the default mysql password.  
  
```  bash
grep "password" /var/log/mysqld.log  
```  
  
Connect to the mysql shell with the default password.  

You can't operate until changing the password. If your mysql version is later than 5.7, there are two ways to configure the strong password rules as follows:  

1. Set up a strong password  
2. Change the password rules as follows  
   
```  bash
set global validate_password_policy=0;  
set global validate_password_length=1;  
```  

Now replace the default password with a new password with a six-character minimum restriction.  

```  sql
ALTER USER 'root'@'localhost' IDENTIFIED BY '${your passwd}';  
flush privileges;  
```  
  
# 2. <a id="chapter-2"></a>Install develop environment for Tars  
## 2.1. Install develop environment for web management system  

For Linux：  
  
Install npm,pm2

```  bash
yum install -y npm
npm i -g pm2
``` 

Nvm script installation is provided by the official website. Execute the following command:  

```  bash
wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.33.11/install.sh | bash  
source ~/.bashrc  
```  
  
Install node and process manager pm2 for node applications with load function:  
```  bash
nvm install v8.11.3  
npm install -g pm2 --registry=https://registry.npm.taobao.org  
```  
  

## 2.2. Install develop environment for C++  

Download **TarsFramework** source code:
```  bash
cd ${source_folder}  
git clone https://github.com/TarsCloud/TarsFramework.git --recursive  
```  
  
Then change the directory to the build folder:   
```  bash
cd ${source_folder}  
git clone https://github.com/TarsCloud/TarsFramework.git --recursive  
cd ${source_folder}/TarsFramework/build  
chmod u+x build.sh  
./build.sh prepare  
./build.sh all  
```  
  
Be aware that the default mysql lib path that Tars use is /usr/local/mysql/ . If mysql is installed in a different path, please modify the files `TarsFramework/CMakeLists.txt` and `TarsFramework/tarscpp/CMakeLists.txt` directory before compiling. (You might change the mysql paths to:"/usr/include/mysql";"/usr/lib64/mysql")  
  
Recompile if needed.  
``` bash
./build.sh cleanall  
./build.sh all  
```  
  
Change to user root and create the installation directory.  
``` bash 
cd /usr/local  
mkdir tars  
chown ${normal user}:${normal user} ./tars/  
```  
  
Installation:
  
```  bash
cd ${source_folder}/build  
./build.sh install or make install  
```  

**The default install path is /usr/local/tars/cpp。**  
  
If you want to install on different path:  
```  
**modify tarscpp/CMakeLists.txt**  
**modify TARS_PATH in tarscpp/servant/makefile/makefile.tars**  
**modify DEMO_PATH in tarscpp/servant/script/create_tars_server.sh**  
```  
  
## 3. <a id="chapter-3"></a>Initialize the db environment for Tars  
### 3.1. Add user  
```sql  
grant all on *.* to 'tars'@'%' identified by 'tars2015' with grant option;  
grant all on *.* to 'tars'@'localhost' identified by 'tars2015' with grant option;  
grant all on *.* to 'tars'@'${hostname}' identified by 'tars2015' with grant option;  
flush privileges;  
```  
**Attention: Modify ${'localhost'} to real hostname from /etc/hosts.**  
  
### 3.2. Create DB  
Search the ip in the script under `framework/sql`,and replace with the above ip.  
  
```bash  
sed -i "s/192.168.2.131/${your machine ip}/g" `grep 192.168.2.131 -rl ./*`  
sed -i "s/db.tars.com/${your machine ip}/g" `grep db.tars.com -rl ./*`  
sed -i "s/10.120.129.226/${your machine ip}/g" `grep 10.120.129.226 -rl ./*`  
```  
  
Execute  
```  
chmod u+x exec-sql.sh  
./exec-sql.sh  
```  
 
After execution of the script, there will be three databases created: db_tars, tars_stat and tars_property.  
  
- db_tars is the core database for framework, it consists of services info, service templates and service configuration, etc.  
- tars_stat is the database for service monitor data.  
- tars_property is the database for service properties monitor data.  
  
## 4. <a id="chapter-4"></a>Build runtime environment for Tars framework  
  
### 4.1. Packing the basic framework service  
  
  
There are two kinds of framework services:  
One is basic core service (required), must be deployed by yourself.  
The other is basic general service, must be patched by management system.  
  
```  
The basic core services:  
tarsAdminRegistry, tarsregistry, tarsnode, tarsconfig, tarspatch  
The basic general services:  
tarsstat, tarsproperty,tarsnotify, tarslog，tarsquerystat，tarsqueryproperty  
```  
First get the core services package, change to build directory and input:  
``` bash 
make framework-tar  
```  
Framework.tgz will be created in current directory.  
It contains tarsAdminRegistry, tarsregistry, tarsnode, tarsconfig and tarspatch deployment files.  
  
Then make the general service package:  
```  bash
make tarsstat-tar  
make tarsnotify-tar  
make tarsproperty-tar  
make tarslog-tar  
make tarsquerystat-tar  
make tarsqueryproperty-tar  
```  
The patch package can be deploy after the patch of management platform, see details in chapter 4.4.  
  
### 4.2. Install basic core service for framework  
#### 4.2.1. Install basic core service  
  
Change to user root, and create the deploy directory for basic service:  
``` bash
cd /usr/local/app  
mkdir tars  
chown ${normal user}:${normal user} ./tars/  
```  
Copy the framework service package to /usr/local/app/tars/ and unzip:  
``` bash  
cp build/framework.tgz /usr/local/app/tars/  
cd /usr/local/app/tars  
tar xzfv framework.tgz  
```  
  
Modify the configuration file in corresponding conf directory for each service, pay attention  
to modify the ip address to your host's address:  
``` bash  
cd /usr/local/app/tars  
sed -i "s/192.168.2.131/${your_machine_ip}/g" `grep 192.168.2.131 -rl ./*`  
sed -i "s/db.tars.com/${your_machine_ip}/g" `grep db.tars.com -rl ./*`  
sed -i "s/registry.tars.com/${your_machine_ip}/g" `grep registry.tars.com -rl ./*`  
sed -i "s/web.tars.com/${your_machine_ip}/g" `grep web.tars.com -rl ./*`  
```  
Execute tars_install.sh script in directory /usr/local/app/tars/ to start tars framework service:  
```  bash
chmod u+x tars_install.sh  
./tars_install.sh  
```  
**If services are deployed on different machines, you need to deal with tars_install.sh script things manually.**  
  
Deploy management platform and launch web management platform to deploy tarspatch (the management platform and tarspatch must in the same machine), change to user root and execute:  
``` bash
tarspatch/util/init.sh  
```  
**Play attention, after executing of above script, check if rsync alive.**  
  
Deploy tarspatch on management platform.  
Deploy tarsconfig on management platform.  
  
You need to configure monitor for tarsnode by crontab. Ensure that it'll be launched after crash:  
```  
* * * * * /usr/local/app/tars/tarsnode/util/monitor.sh  
```  
  
#### 4.2.2. Install tarsnode before scale up  
  
After success of basic core service installation, if you need to deploy tars-based service on different machine,  
install tarsnode first.  
  
If you only deploy service on a single machine, ignore this section.  
  
The details are similar to those described in last section.  
Change to user root, create the directory for deploy service in, as following:  
``` bash  
cd /usr/local/app  
mkdir tars  
chown ${normal user}:${normal user} ./tars/  
```  
  
Copy the framework service package to /usr/local/app/tars/:  
``` bash  
cp build/framework.tgz /usr/local/app/tars/  
cd /usr/local/app/tars  
tar xzfv framework.tgz  
```  
Modify the configuration file in corresponding conf directory for each service, don't forget  
to modify the ip address to your host's address:  
``` bash  
cd /usr/local/app/tars  
sed -i "s/192.168.2.131/${your_machine_ip}/g" `grep 192.168.2.131 -rl ./*`  
sed -i "s/db.tars.com/${your_machine_ip}/g" `grep db.tars.com -rl ./*`  
sed -i "s/registry.tars.com/${your_machine_ip}/g" `grep registry.tars.com -rl ./*`  
sed -i "s/web.tars.com/${your_machine_ip}/g" `grep web.tars.com -rl ./*`  
```  
``` bash 
chmod u+x tarsnode_install.sh  
tarsnode_install.sh  
```  
  
You need to configure monitor for tarsnode by crontab. Ensure that it'll be launched after crash:

```  
* * * * * /usr/local/app/tars/tarsnode/util/monitor.sh  
```  
  
### 4.3. Install web management system  
  
> The name of the directory where management system source code in is **web**  
>  
You can clone the TarsWeb folder too.  
```  bash
git clone https://github.com/TarsCloud/TarsWeb.git  
```  
Modify the configuration file and change the IP address in the configuration file to the local IP address, as follows:  
```  bash
cd ${install folder}  
sed -i 's/db.tars.com/${your_machine_ip}/g' config/webConf.js  
sed -i 's/registry.tars.com/${your_machine_ip}/g' config/tars.conf  
```  
  
Install web management page dependencies, start web  
```  bash
cd ${install folder}  
npm install --registry=https://registry.npm.taobao.org  
npm run prd  
```  
  
Create log directory  
```  bash
mkdir -p /data/log/tars  
```  

visit the website, input`${your machine ip}:3000` into browser.  
  
![tars](docs/images/tars_web_system_index_en.png)
  
  
### 4.4. Install general basic service for framework  
  
**Tips:There are some *.tgz files under the path of /usr/local/app/TarsFramework/build,such as tarslog.tgz, tarsnotify.tgz and so on. There are the patch package for the following services.  
  
#### 4.4.1 Deploy and patch tarsnotify  
  
By default, tarsnofity is ready when install core basic service:  
  
![tars](docs/images/tars_tarsnotify_bushu_en.png)  
  
Upload patch package：  
  
![tars](docs/images/tars_tarsnotify_patch_en.png)  
  
### 4.4.2 Deploy and patch tarsstat  
  
Deploy message:  
  
![tars](docs/images/tars_tarsstat_bushu_en.png)  
  
Upload patch package：  
  
![tars](docs/images/tars_tarsstat_patch_en.png)  
  
### 4.4.3 Deploy and patch tarsproperty  
  
Deployment message:  
  
![tars](docs/images/tars_tarsproperty_bushu_en.png)  
  
Upload patch package：  
  
![tars](docs/images/tars_tarsproperty_patch_en.png)  
  
#### 4.4.4 Deploy and patch tarslog  
  
Deployment message:  
  
![tars](docs/images/tars_tarslog_bushu_en.png)  
  
Upload patch package：  
  
![tars](docs/images/tars_tarslog_patch_en.png)  
  
### 4.4.5 Deploy and patch tarsquerystat  
  
Deployment message:  
**Pay attention: please select non-Tars protocol, because web platform use json protocol to get service monitor info.**  
  
![tars](docs/images/tars_tarsquerystat_bushu_en.png)  
  
  
Upload patch package：  
  
![tars](docs/images/tars_tarsquerystat_patch_en.png)  
  
#### 4.4.6 Deploy and patch tarsqueryproperty  
  
Deployment message:  
**Pay attention: please select non-Tars protocol, because web platform use json protocol to get service monitor info.**  
  
![tars](docs/images/tars_tarsqueryproperty_bushu_en.png)  
  
  
Upload patch package：  
  
![tars](docs/images/tars_tarsqueryproperty_patch_en.png)  
  
Finally,there are some paths you may need to check for troubleshooting once the system doesn't work as you wish.  
(1) ${TarsWeb}/log  
(2) /usr/local/app/tars/app_log/tars