Merge pull request #231 from BoxiLi/drop-old-version

Drop support of Python=3.7 and 3.8

.github/workflows/build.yml

@@ -54,7 +54,7 @@ jobs:
           # For the sdist we should be as conservative as possible with our
           # Python version.  This should be the lowest supported version.  This
           # means that no unsupported syntax can sneak through.
-          python-version: '3.7'
+          python-version: '3.11'
 
       - name: Install pip build
         run: |
@@ -89,7 +89,7 @@ jobs:
         name: Install Python
         with:
           # This is about the build environment, not the released wheel version.
-          python-version: '3.7'
+          python-version: '3.11'
 
       - name: Install pip build
         run: |
@@ -129,7 +129,7 @@ jobs:
       - uses: actions/setup-python@v4
         name: Install Python
         with:
-          python-version: '3.7'
+          python-version: '3.11'
 
       - name: Verify this is not a dev version
         shell: bash

.github/workflows/build_documentation.yml

@@ -14,7 +14,7 @@ jobs:
       - uses: actions/setup-python@v4
         name: Install Python
         with:
-          python-version: '3.8'
+          python-version: '3.9'
 
       - name: Install Pandoc
         run: |
@@ -27,7 +27,8 @@ jobs:
 
       - name: Install qutip-qip from GitHub
         run: |
-          python -mpip install -e .[full]
+          python -mpip install qutip==4.7.3
+          python -mpip install -e .
           # Install in editable mode so it doesn't matter if we import from
           # inside the installation directory, otherwise we can get some errors
           # because we're importing from the wrong location.

.github/workflows/test.yml

@@ -12,11 +12,11 @@ jobs:
     strategy:
       matrix:
         include:
-          - case-name: qutip@5.0.0a2
+          - case-name: qutip@5.0.0
             os: ubuntu-latest
-            qutip-version: '==5.0.0a2'
+            qutip-version: '==5.0.0'
             pyqir-version: ''
-            python-version: '3.10'
+            python-version: '3.11'
           - case-name: qutip@qutip-4.7.X
             os: ubuntu-latest
             qutip-version: '@qutip-4.7.X'
@@ -26,25 +26,19 @@ jobs:
             os: ubuntu-latest
             qutip-version: '@master'
             pyqir-version: ''
-            python-version: '3.11'
-          - case-name: qutip@4.6
-            os: windows-latest
-            qutip-version: '==4.6.*'
-            qiskit-version: ''
-            pyqir-version: ''
-            python-version: '3.8'
+            python-version: '3.12'
           - case-name: qutip@4.7
             os: macOS-latest
             qutip-version: '==4.7.*'
             qiskit-version: ''
             pyqir-version: ''
-            python-version: '3.9'
+            python-version: '3.11'
           - case-name: qiskit+qir
             os: windows-latest
             qutip-version: ''
             qiskit-version: '==0.36.*'
             pyqir-version: '==0.6.2'
-            python-version: '3.8'
+            python-version: '3.9'
           - case-name: qiskit+qir
             os: macOS-latest
             qutip-version: ''
@@ -56,7 +50,7 @@ jobs:
             qutip-version: ''
             qiskit-version: '==0.36.*'
             pyqir-version: '==0.6.2'
-            python-version: '3.7'
+            python-version: '3.9'
 
     steps:
     - uses: actions/checkout@v3
@@ -74,12 +68,6 @@ jobs:
       run: |
         python -m pip install 'git+https://github.com/qutip/qutip.git${{ matrix.qutip-version }}'
 
-    # For qutip-v5 qutip.control is replaced by qutip-qtrl
-    - name: Install qutip-qtrl from PyPI
-      if: ${{ matrix.qutip-version == '@master' || startsWith( matrix.qutip-version, '==5') }}
-      run: |
-        python -m pip install 'git+https://github.com/qutip/qutip-qtrl.git'
-
     - name: Install Qiskit from PyPI
       if: ${{ matrix.qiskit-version != '' }}
       run: python -m pip install 'qiskit${{ matrix.qiskit-version }}'
@@ -111,11 +99,12 @@ jobs:
     - name: Set up Python
       uses: actions/setup-python@v4
       with:
-        python-version: 3.8
+        python-version: 3.9
     - name: Install dependencies
       run: |
         python -m pip install --upgrade pip
         python -mpip install -r doc/requirements.txt
+        pip install qutip==4.7.3
         pip install .
     - name: Test code snippets in the documentation
       run: |

README.md

@@ -16,7 +16,7 @@ The qutip-qip package, QuTiP quantum information processing, aims at providing b
 Compared to other libraries for quantum information processing, qutip-qip puts additional emphasis on the physics layer and the interaction with the QuTiP package.
 The package offers two different approaches for simulating quantum circuits, one with `QubitCircuit` calculating unitary evolution under quantum gates by matrix product, another called `Processor` using open system solvers in QuTiP to simulate noisy quantum device.
 
-If you would like to know the future development plan and ideas, have a look at the [discussion panel](https://github.com/qutip/qutip-qip/discussions) as well as the [qutip documentation for ideas](https://qutip.org/docs/latest/development/ideas.html).
+If you would like to know the future development plan and ideas, have a look at the [discussion panel](https://github.com/qutip/qutip-qip/discussions) as well as the [qutip documentation for ideas](https://qutip.readthedocs.io/en/stable/development/ideas.html).
 
 Quick start
 -----------

doc/source/conf.py

@@ -185,5 +185,5 @@ def qutip_qip_version():
 # -- Options for intersphinx ---------------------------------------
 
 intersphinx_mapping = {
-    'qutip': ('https://qutip.org/docs/latest/', None),
+    'qutip': ('https://qutip.readthedocs.io/en/stable/', None),
 }

doc/source/contribution-code.rst

@@ -7,7 +7,7 @@ Contributing to the source code
 Build up an development environment
 ===================================
 
-Please follow the instruction on the `QuTiP contribution guide <https://qutip.org/docs/latest/development/contributing.html#building>`_ to
+Please follow the instruction on the `QuTiP contribution guide <https://qutip.readthedocs.io/en/stable/development/contributing.html#building>`_ to
 build a conda environment.
 You don't need to build ``qutip`` in the editable mode unless you also want to contribute to `qutip`.
 Instead, you need to install ``qutip-qip`` by downloading the source code and run

doc/source/installation.rst

@@ -24,7 +24,7 @@ Prerequisites
 This package is built upon QuTiP, of which the installation guide can be found at on `QuTiP Installation <http://qutip.org/docs/latest/installation.html>`_.
 The only difference is that C++ compilers are not required here
 since there is no run-time compiling for qutip-qip.
-The minimal Python version supported is Python 3.7.
+The minimal Python version supported is Python 3.9.
 
 
 In particular, following packages are necessary for running qutip-qip

doc/source/tutorials-website/tutorials.html.jinja

@@ -5,7 +5,7 @@
 </div>
 
 <h4 id="quantum-information-processing">Quantum information processing</h4>
-<p>This section contains tutorials for QuTiP Version 5. You can find the tutorials for QuTiP Version 4 <a href="https://qutip.org/qutip-tutorials/">here</a>. To check the version of QuTiP, you can use the <code>qutip.about()</code> command.</p>
+<p>This section contains tutorials for QuTiP Version 5. You can find the tutorials for QuTiP Version 4 <a href="https://qutip.org/qutip-tutorials/index-v4">here</a>. To check the version of QuTiP, you can use the <code>qutip.about()</code> command.</p>
 
 <h5 id="qip-circuits">Quantum circuits and algorithms</h5>
 <ul>

setup.cfg

@@ -40,10 +40,12 @@ where = src
 
 [options.extras_require]
 graphics = matplotlib>=1.3.0
+control = qutip-qtrl
 tests =
     pytest>=5.2
 full =
     %(graphics)s
     %(tests)s
+    %(control)s
 qiskit = 
     qiskit>=0.36.2