[[Testing Framework Cheatsheet]] = Testing
To create a distribution without running the tests, simply run the following:
mvn clean package -DskipTests
To disable and enable network transport, set the Des.node.mode
.
Use network transport:
-Des.node.mode=network
Use local transport (default since 1.3):
-Des.node.mode=local
Alternatively, you can set the ES_TEST_LOCAL
environment variable:
export ES_TEST_LOCAL=true && mvn test
In order to run Elasticsearch from source without building a package, you can run it using Maven:
mvn compile exec:exec
-
tests.class
is a class-filtering shell-like glob pattern, -
tests.method
is a method-filtering glob pattern.
Run a single test case (variants)
mvn test -Dtests.class=org.elasticsearch.package.ClassName mvn test "-Dtests.class=*.ClassName"
Run all tests in a package and sub-packages
mvn test "-Dtests.class=org.elasticsearch.package.*"
Run any test methods that contain 'esi' (like: …r*esi*ze…).
mvn test "-Dtests.method=*esi*"
You can also filter tests by certain annotations ie:
-
@Slow
- tests that are know to take a long time to execute -
@Nightly
- tests that only run in nightly builds (disabled by default) -
@Integration
- integration tests -
@Backwards
- backwards compatibility tests (disabled by default) -
@AwaitsFix
- tests that are waiting for a bugfix (disabled by default) -
@BadApple
- tests that are known to fail randomly (disabled by default)
Those annotation names can be combined into a filter expression like:
mvn test -Dtests.filter="@nightly and not @slow"
to run all nightly test but not the ones that are slow. tests.filter
supports
the boolean operators and, or, not
and grouping ie:
mvn test -Dtests.filter="@nightly and not(@slow or @backwards)"
Run with a given seed (seed is a hex-encoded long).
mvn test -Dtests.seed=DEADBEEF
Every test repetition will have a different method seed (derived from a single random master seed).
mvn test -Dtests.iters=N -Dtests.class=*.ClassName
Every test repetition will have exactly the same master (0xdead) and method-level (0xbeef) seed.
mvn test -Dtests.iters=N -Dtests.class=*.ClassName -Dtests.seed=DEAD:BEEF
(note the filters - individual test repetitions are given suffixes, ie: testFoo[0], testFoo[1], etc… so using testmethod or tests.method ending in a glob is necessary to ensure iterations are run).
mvn test -Dtests.iters=N -Dtests.class=*.ClassName -Dtests.method=mytest*
Repeats N times but skips any tests after the first failure or M initial failures.
mvn test -Dtests.iters=N -Dtests.failfast=true -Dtestcase=... mvn test -Dtests.iters=N -Dtests.maxfailures=M -Dtestcase=...
Test groups can be enabled or disabled (true/false).
Default value provided below in [brackets].
mvn test -Dtests.nightly=[false] - nightly test group (@Nightly) mvn test -Dtests.weekly=[false] - weekly tests (@Weekly) mvn test -Dtests.awaitsfix=[false] - known issue (@AwaitsFix) mvn test -Dtests.slow=[true] - slow tests (@Slow)
By default, the tests run sequentially on a single forked JVM.
To run with more forked JVMs than the default use:
mvn test -Dtests.jvms=8 test
Don’t count hypercores for CPU-intense tests and leave some slack for JVM-internal threads (like the garbage collector). Make sure there is enough RAM to handle child JVMs.
It is possible to provide a version that allows to adapt the tests behaviour to older features or bugs that have been changed or fixed in the meantime.
mvn test -Dtests.compatibility=1.0.0
Run all tests without stopping on errors (inspect log files).
mvn test -Dtests.haltonfailure=false test
Run more verbose output (slave JVM parameters, etc.).
mvn test -verbose test
Change the default suite timeout to 5 seconds for all tests (note the exclamation mark).
mvn test -Dtests.timeoutSuite=5000! ...
Change the logging level of ES (not mvn)
mvn test -Des.logger.level=DEBUG
Print all the logging output from the test runs to the commandline even if tests are passing.
mvn test -Dtests.output=always
Configure the heap size.
mvn test -Dtests.heap.size=512m
Pass arbitrary jvm arguments.
mvn test -Dtests.jvm.argline="-XX:HeapDumpPath=/path/to/heapdumps"
Running backwards compatibility tests is disabled by default since it requires a release version of elasticsearch to be present on the test system. To run backwards compatibiilty tests untar or unzip a release and run the tests with the following command:
mvn test -Dtests.filter="@backwards" -Dtests.bwc.version=x.y.z -Dtests.bwc.path=/path/to/elasticsearch
If the elasticsearch release is placed under ./backwards/elasticsearch-x.y.z
the path
can be omitted:
mvn test -Dtests.filter="@backwards" -Dtests.bwc.version=x.y.z
To setup the bwc test environment execute the following steps (provided you are already in your elasticsearch clone):
$ mkdir backwards && cd backwards $ curl -O https://download.elasticsearch.org/elasticsearch/elasticsearch/elasticsearch-1.2.1.tar.gz $ tar -xzf elasticsearch-1.2.1.tar.gz
The available integration tests make use of the java API to communicate with the elasticsearch nodes, using the internal binary transport (port 9300 by default). The REST layer is tested through specific tests that are shared between all the elasticsearch official clients and consist of YAML files that describe the operations to be executed and the obtained results that need to be tested.
The REST tests are run automatically when executing the maven test command. To run only the REST tests use the following command:
mvn test -Dtests.filter="@Rest"
ElasticsearchRestTests
is the executable test class that runs all the
yaml suites available within the rest-api-spec
folder.
The REST tests support all the options provided by the randomized runner, plus the following:
-
tests.rest[true|false]
: determines whether the REST tests need to be run (default) or not. -
tests.rest.suite
: comma separated paths of the test suites to be run (by default loaded from /rest-api-spec/test). It is possible to run only a subset of the tests providing a sub-folder or even a single yaml file (the default /rest-api-spec/test prefix is optional when files are loaded from classpath) e.g. -Dtests.rest.suite=index,get,create/10_with_id -
tests.rest.blacklist
: comma separated globs that identify tests that are blacklisted and need to be skipped e.g. -Dtests.rest.blacklist=index//Index document,get/10_basic/ -
tests.rest.spec
: REST spec path (default /rest-api-spec/api)
Note that the REST tests, like all the integration tests, can be run against an external
cluster by specifying the tests.cluster
property, which if present needs to contain a
comma separated list of nodes to connect to (e.g. localhost:9300). A transport client will
be created based on that and used for all the before|after test operations, and to extract
the http addresses of the nodes so that REST requests can be sent to them.
To disable validation step (forbidden API or // NOCOMMIT
) use
mvn test -Dvalidate.skip=true
You can also skip this by using the "dev" profile:
mvn test -Pdev
Shell scripts can be tested with the Bash Automate Testing System tool available at https://github.com/sstephenson/bats. Once the tool is installed, you can execute a .bats test file with the following command:
bats test_file.bats
When executing the test files located in the /packaging/scripts
folder,
it’s possible to add the flag ES_CLEAN_BEFORE_TEST=true
to clean the test
environment before the tests are executed:
ES_CLEAN_BEFORE_TEST=true bats 30_deb_package.bats