title | subtitle | layout | show_sidebar |
---|---|---|---|
BMS Info |
BMS for both XR and Pint. |
page |
false |
PIC16F1788-I/ML
RISC CPU- Datasheet: 40001675C.pdf
- this one sits in between the
MAX14921
's SPI interface and exposed contacts on the PCB - https://www.digikey.com/products/en?KeyWords=PIC16F1788-I/ML
PROG1
pinout:SN65HVD1786
RS-485 Transceiver (IC5 Marking)- Datasheet: sn65hvd1786.pdf
- https://eu.mouser.com/ProductDetail/595-SN65HVD1786DR
- Connected to UART on PIC16
- Differential Pair connected to 6-Pin Connecter
MAX14921
battery measurement analog front-end- controlled by an SPI interface
- Datasheet: MAX14920-MAX14921.pdf
020N08N5
MOSFETCSD19536KTT
power MOSFETLM393-N
voltage comparator- Datasheet: lm393-n.pdf
VP1786
(SN65HVD1786D
) transceiver- Datasheet: sn65hvd1791.pdf
3920R 1L00 1% 1846
current sense resistor- Datasheet: 2629492.pdf
- Amass XT60PW connectors for battery / controller power (note reversed polarity for battery connector)
- JAE ES9 female (on PCB) / male (on wire) connector for charger cable
- JST GH 5-position female header used for connector to controller
Note: This is based on very small sample size. (Currently about 10 boards.)
Hardware version | BMS PCB revision | Controller PCB revision |
---|---|---|
4209 | v2.0.4 - v2.0.5 | r2.9 |
4210 | v2.0.7 | ? |
Hardware version | BMS PCB revision | Controller PCB revision |
---|---|---|
5300 | v2.0.7 | r3.1.3 |
5314 | v2.0.7 | ? |
Close-up of the BMS connector pinout and the XT-60 connector
Each pack has 4 10k NTC Thermistors placed in-between cells for temperature monitoring.