Skip to content

Latest commit

 

History

History
83 lines (51 loc) · 3.43 KB

README.md

File metadata and controls

83 lines (51 loc) · 3.43 KB

LoRaNow

LoRaNow is a open source communication protocol to make easier to understand the concept of Node / Gateway communication using LoRa technology.

This library was design using the Arduino LoRa Library by Sandeep Mistry.

Features

  • Hardware Compatibility - Compatible with Arduino and ESP boards with a LoRa module attached.
  • Id - Each node has an identification, by default the library creates a unique id for the node.
  • Checksum - Each payload has a checksum to verify if the data is corrupted.
  • State Machine - The library has a state machine algorithm to manage the LoRa module, open an RX window after sending data and put the module to sleep.

Compatible Hardware

The main focus hardware is Arduino and ESP boards with RFM95W LoRa module.

RFM95W

The default pinout connection is like the table below.

RFM95W Arduino ESP8266 ESP32
VCC 3.3V 3.3V 3.3V
GND GND GND GND
SCK SCK SCK SCK
MISO MISO MISO MISO
MOSI MOSI MOSI MOSI
SS 10 gpio16 gpio18
DIO0 2 gpio15 gpio26

SS, and DIO0 pins can be changed by using LoRaNow.setPins(ss, dio0) or LoRaNow.setPinsSPI(sck, miso, mosi, ss, dio0). DIO0 pin is needed, it must be interrupt capable via attachInterrupt(...).

Ferquency

You can use this table to lookup the available frequencies by your country. The selectable frequency also depends on your hardware.

You can select the frequency using LoRaNow.setFrequency(frequency) or you can select the frequency by country.

  • LoRaNow.setFrequencyCN() - Select the frequency 486.5 MHz - Used in China
  • LoRaNow.setFrequencyEU() - Select the frequency 868.3 MHz - Used in Europe
  • LoRaNow.setFrequencyUS() - Select the frequency 904.1 MHz - Used in USA, Canada and South America
  • LoRaNow.setFrequencyAU() - Select the frequency 917.0 MHz - Used in Australia, Brazil and Chile

Protocol Payload

This is the payload format, this protocol don't have any kind of encryption.

Protocol Device ID Count Length CheckSum Payload
1 Byte 4 Bytes 1 Byte 1 Byte 1 Byte N Bytes

Installation

Examples

The library comes with examples. After installing the library you need to restart the Arduino IDE before they can be found under File > Examples > LoRaNow.

API

See API.md.

License

This library is licensed under the MIT Licence.

To do

  • Example for ESP8266 board
  • Example for ESP32 board
  • Improve documentation
  • State machine

See news and other projects on my blog

Do you like this library? Please star this project on GitHub!