Display command execution time on the previous line

[anurag-roy]

I am a massive fan of the transient prompt, but sometimes I feel I have lost some valuable contextual info for a past command, especially the execution time. So I have been going through some of the p10k-on-pre-promp issues and their comments and have been hacking on my config.

I was able to achieve what I set out for i.e. preserve the command execution time and timestamp on past commands while keeping the transient prompt feel.

However, there's one small thing that is bugging me very much.

The execution time of a command appears on the RHS of the next command, which gets slightly confusing and feels like that command took that amount of time instead of the previous one, e.g. see the above screenshot.

How can I make the execution time appear on the same rhs of the command line? Any help/pointers will be appreciated!

Here's my current config if it helps

# Generated by Powerlevel10k configuration wizard on 2022-10-29 at 03:06 IST.
# Based on romkatv/powerlevel10k/config/p10k-lean-8colors.zsh, checksum 64646.
# Wizard options: powerline, unicode, lean_8colors, 1 line, sparse, concise,
# transient_prompt, instant_prompt=quiet.
# Type `p10k configure` to generate another config.
#
# Config for Powerlevel10k with 8-color lean prompt style. Type `p10k configure` to generate
# your own config based on it.
#
# Tip: Looking for a nice color? Here's a one-liner to print colormap.
#
#   for i in {0..255}; do print -Pn "%K{$i}  %k%F{$i}${(l:3::0:)i}%f " ${${(M)$((i%6)):#3}:+$'\n'}; done

# Temporarily change options.
'builtin' 'local' '-a' 'p10k_config_opts'
[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'

() {
  emulate -L zsh -o extended_glob

  # Unset all configuration options. This allows you to apply configuration changes without
  # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
  unset -m '(POWERLEVEL9K_*|DEFAULT_USER)~POWERLEVEL9K_GITSTATUS_DIR'

  # Zsh >= 5.1 is required.
  [[ $ZSH_VERSION == (5.<1->*|<6->.*) ]] || return

  # The list of segments shown on the left. Fill it with the most important segments.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
    dir                     # current directory
    vcs                     # git status
    command_execution_time
    newline
    prompt_char             # prompt symbol
  )

  # The list of segments shown on the right. Fill it with less important segments.
  # Right prompt on the last prompt line (where you are typing your commands) gets
  # automatically hidden when the input line reaches it. Right prompt above the
  # last prompt line gets hidden if it would overlap with left prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
    newline
    command_execution_time
    time
  )

  # Defines character set used by powerlevel10k. It's best to let `p10k configure` set it for you.
  typeset -g POWERLEVEL9K_MODE=powerline
  # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
  # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
  typeset -g POWERLEVEL9K_ICON_PADDING=none

  # Basic style options that define the overall look of your prompt. You probably don't want to
  # change them.
  typeset -g POWERLEVEL9K_BACKGROUND=                            # transparent background
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE=  # no surrounding whitespace
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' '  # separate segments with a space
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR=        # no end-of-line symbol

  # When set to true, icons appear before content on both sides of the prompt. When set
  # to false, icons go after content. If empty or not set, icons go before content in the left
  # prompt and after content in the right prompt.
  #
  # You can also override it for a specific segment:
  #
  #   POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
  #
  # Or for a specific segment in specific state:
  #
  #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true

  # Filler between left and right prompt on the first prompt line. You can set it to '┬╖' or 'ΓöÇ'
  # to make it easier to see the alignment between left and right prompt and to separate prompt
  # from command output. It serves the same purpose as ruler (see above) without increasing
  # the number of prompt lines. You'll probably want to set POWERLEVEL9K_SHOW_RULER=false
  # if using this. You might also like POWERLEVEL9K_PROMPT_ADD_NEWLINE=false for more compact
  # prompt.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '
  if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
    # The color of the filler.
    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=7
    # Add a space between the end of left prompt and the filler.
    typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=' '
    # Add a space between the filler and the start of right prompt.
    typeset -g POWERLEVEL9K_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL=' '
    # Start filler from the edge of the screen if there are no left segments on the first line.
    typeset -g POWERLEVEL9K_EMPTY_LINE_LEFT_PROMPT_FIRST_SEGMENT_END_SYMBOL='%{%}'
    # End filler on the edge of the screen if there are no right segments on the first line.
    typeset -g POWERLEVEL9K_EMPTY_LINE_RIGHT_PROMPT_FIRST_SEGMENT_START_SYMBOL='%{%}'
  fi

  ################################[ prompt_char: prompt symbol ]################################
  # Green prompt symbol if the last command succeeded.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=2
  # Red prompt symbol if the last command failed.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=1
  # Default prompt symbol.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='>'
  # Prompt symbol in command vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='<'
  # Prompt symbol in visual vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
  # Prompt symbol in overwrite vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='Γû╢'
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
  # No line terminator if prompt_char is the last segment.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''
  # No line introducer if prompt_char is the first segment.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=

  ##################################[ dir: current directory ]##################################
  # Default current directory color.
  typeset -g POWERLEVEL9K_DIR_FOREGROUND=2
  # If directory is too long, shorten some of its segments to the shortest possible unique
  # prefix. The shortened directory can be tab-completed to the original.
  typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
  # Replace removed segment suffixes with this symbol.
  typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
  # Color of the shortened directory segments.
  typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=2
  # Color of the anchor directory segments. Anchor segments are never shortened. The first
  # segment is always an anchor.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=2
  # Set to true to display anchor directory segments in bold.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=false
  # Don't shorten directories that contain any of these files. They are anchors.
  local anchor_files=(
    .bzr
    .citc
    .git
    .hg
    .node-version
    .python-version
    .go-version
    .ruby-version
    .lua-version
    .java-version
    .perl-version
    .php-version
    .tool-versions
    .shorten_folder_marker
    .svn
    .terraform
    CVS
    Cargo.toml
    composer.json
    go.mod
    package.json
    stack.yaml
  )
  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
  # If set to "first" ("last"), remove everything before the first (last) subdirectory that contains
  # files matching $POWERLEVEL9K_SHORTEN_FOLDER_MARKER. For example, when the current directory is
  # /foo/bar/git_repo/nested_git_repo/baz, prompt will display git_repo/nested_git_repo/baz (first)
  # or nested_git_repo/baz (last). This assumes that git_repo and nested_git_repo contain markers
  # and other directories don't.
  #
  # Optionally, "first" and "last" can be followed by ":<offset>" where <offset> is an integer.
  # This moves the truncation point to the right (positive offset) or to the left (negative offset)
  # relative to the marker. Plain "first" and "last" are equivalent to "first:0" and "last:0"
  # respectively.
  typeset -g POWERLEVEL9K_DIR_TRUNCATE_BEFORE_MARKER=false
  # Don't shorten this many last directory segments. They are anchors.
  typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
  # Shorten directory if it's longer than this even if there is space for it. The value can
  # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
  # directory will be shortened only when prompt doesn't fit or when other parameters demand it
  # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
  # If set to `0`, directory will always be shortened to its minimum length.
  typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
  # many columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50
  # If set to true, embed a hyperlink into the directory. Useful for quickly
  # opening a directory in the file manager simply by clicking the link.
  # Can also be handy when the directory is shortened, as it allows you to see
  # the full directory that was used in previous commands.
  typeset -g POWERLEVEL9K_DIR_HYPERLINK=false

  # Enable special styling for non-writable directories. See POWERLEVEL9K_LOCK_ICON and
  # POWERLEVEL9K_DIR_CLASSES below.
  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v2

  # Enable special styling for non-writable and non-existent directories. See POWERLEVEL9K_LOCK_ICON
  # and POWERLEVEL9K_DIR_CLASSES below.
  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=v3

  # The default icon shown next to non-writable and non-existent directories when
  # POWERLEVEL9K_DIR_SHOW_WRITABLE is set to v3.
  typeset -g POWERLEVEL9K_LOCK_ICON='Γêà'

  # Custom prefix.
  # typeset -g POWERLEVEL9K_DIR_PREFIX='%fin '

  #####################################[ vcs: git status ]######################################
  # Branch icon. Set this parameter to '\UE0A0 ' for the popular Powerline branch icon.
  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON='\UE0A0 '

  # Untracked files icon. It's really a question mark, your font isn't broken.
  # Change the value of this parameter to show a different icon.
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'

  # Formatter for Git status.
  #
  # Example output: master wip Γçú42Γçí42 *42 merge ~42 +42 !42 ?42.
  #
  # You can edit the function to customize how Git status looks.
  #
  # VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
  # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
  function my_git_formatter() {
    emulate -L zsh

    if [[ -n $P9K_CONTENT ]]; then
      # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
      # gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
      typeset -g my_git_format=$P9K_CONTENT
      return
    fi

    local res

    if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
      local branch=${(V)VCS_STATUS_LOCAL_BRANCH}
      # If local branch name is at most 32 characters long, show it in full.
      # Otherwise show the first 12 … the last 12.
      # Tip: To always show local branch name in full without truncation, delete the next line.
      (( $#branch > 32 )) && branch[13,-13]="…"  # <-- this line
      res+="${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}${branch//\%/%%}"
    fi

    if [[ -n $VCS_STATUS_TAG
          # Show tag only if not on a branch.
          # Tip: To always show tag, delete the next line.
          && -z $VCS_STATUS_LOCAL_BRANCH  # <-- this line
        ]]; then
      local tag=${(V)VCS_STATUS_TAG}
      # If tag name is at most 32 characters long, show it in full.
      # Otherwise show the first 12 … the last 12.
      # Tip: To always show tag name in full without truncation, delete the next line.
      (( $#tag > 32 )) && tag[13,-13]="…"  # <-- this line
      res+="#${tag//\%/%%}"
    fi

    # Display the current Git commit if there is no branch and no tag.
    # Tip: To always display the current Git commit, delete the next line.
    [[ -z $VCS_STATUS_LOCAL_BRANCH && -z $VCS_STATUS_TAG ]] &&  # <-- this line
      res+="@${VCS_STATUS_COMMIT[1,8]}"

    # Show tracking branch name if it differs from local branch.
    if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
      res+=":${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"
    fi

    local computed_status
    
    # Γçú if behind the remote.
    (( VCS_STATUS_COMMITS_BEHIND )) && computed_status+="Γçú"
    # Γçí if ahead of the remote.
    (( VCS_STATUS_COMMITS_AHEAD  )) && computed_status+="Γçí"
    # Γçá if behind the push remote.
    (( VCS_STATUS_PUSH_COMMITS_BEHIND )) && computed_status+="Γçá"
    # Γçó if ahead of the push remote.
    (( VCS_STATUS_PUSH_COMMITS_AHEAD  )) && computed_status+="Γçó"
    # * if have stashes.
    (( VCS_STATUS_STASHES        )) && computed_status+="*"
    # 'merge' if the repo is in an unusual state.
    [[ -n $VCS_STATUS_ACTION     ]] && computed_status+="${VCS_STATUS_ACTION}"
    # ~ if have merge conflicts.
    (( VCS_STATUS_NUM_CONFLICTED )) && computed_status+="~"
    # + if have staged changes.
    (( VCS_STATUS_NUM_STAGED     )) && computed_status+="+"
    # ! if have unstaged changes.
    (( VCS_STATUS_NUM_UNSTAGED   )) && computed_status+="!"
    # ? if have untracked files. It's really a question mark, your font isn't broken.
    # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
    # Remove the next line if you don't want to see untracked files at all.
    (( VCS_STATUS_NUM_UNTRACKED  )) && computed_status+="${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}"
    # "ΓöÇ" if the number of unstaged files is unknown. This can happen due to
    # POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY (see below) being set to a non-negative number lower
    # than the number of files in the Git index, or due to bash.showDirtyState being set to false
    # in the repository config. The number of staged and untracked files may also be unknown
    # in this case.
    (( VCS_STATUS_HAS_UNSTAGED == -1 )) && computed_status+="ΓöÇ"

    if [[ -z $computed_status ]]; then
      computed_status+="Γ£ö"
    fi

    typeset -g my_git_format="%5F${res} ${computed_status}"
  }
  functions -M my_git_formatter 2>/dev/null

  # Don't count the number of unstaged, untracked and conflicted files in Git repositories with
  # more than this many files in the index. Negative value means infinity.
  #
  # If you are working in Git repositories with tens of millions of files and seeing performance
  # sagging, try setting POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY to a number lower than the output
  # of `git ls-files | wc -l`. Alternatively, add `bash.showDirtyState = false` to the repository's
  # config: `git config bash.showDirtyState false`.
  typeset -g POWERLEVEL9K_VCS_MAX_INDEX_SIZE_DIRTY=-1

  # Don't show Git status in prompt for repositories whose workdir matches this pattern.
  # For example, if set to '~', the Git repository at $HOME/.git will be ignored.
  # Multiple patterns can be combined with '|': '~(|/foo)|/bar/baz/*'.
  typeset -g POWERLEVEL9K_VCS_DISABLED_WORKDIR_PATTERN='~'

  # Disable the default Git status formatting.
  typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
  # Install our own Git status formatter.
  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter(1)))+${my_git_format}}'
  typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION='${$((my_git_formatter(0)))+${my_git_format}}'
  # Enable counters for staged, unstaged, etc.
  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1

  # Icon color.
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=2
  typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=
  # Custom icon.
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=
  # Custom prefix.
  typeset -g POWERLEVEL9K_VCS_PREFIX='%fon '

  # Show status of repositories of these types. You can add svn and/or hg if you are
  # using them. If you do, your prompt may become slow even when your current directory
  # isn't in an svn or hg repository.
  typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)

  # These settings are used for repositories other than Git or when gitstatusd fails and
  # Powerlevel10k has to fall back to using vcs_info.
  typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=2
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=2
  typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=3

  ##########################[ status: exit code of the last command ]###########################
  # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
  # style them independently from the regular OK and ERROR state.
  typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true

  # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
  # it will signify success by turning green.
  typeset -g POWERLEVEL9K_STATUS_OK=false
  typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION='Γ£ö'

  # Status when some part of a pipe command fails but the overall exit status is zero. It may look
  # like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION='Γ£ö'

  # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
  # it will signify error by turning red.
  typeset -g POWERLEVEL9K_STATUS_ERROR=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=1
  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION='Γ£ÿ'

  # Status when the last command was terminated by a signal.
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=1
  # Use terse signal names: "INT" instead of "SIGINT(2)".
  typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION='Γ£ÿ'

  # Status when some part of a pipe command fails and the overall exit status is also non-zero.
  # It may look like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=1
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION='Γ£ÿ'

  ###################[ command_execution_time: duration of the last command ]###################
  # Show duration of the last command if takes at least this many seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=1
  # Show this many fractional digits. Zero means round to seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
  # Execution time color.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=3
  # Duration format: 1d 2h 3m 4s.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
  # Custom icon.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION=
  # Custom prefix.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook '

  #######################[ background_jobs: presence of background jobs ]#######################
  # Don't show the number of background jobs.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
  # Background jobs color.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=1
  # Custom icon.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='Γëí'

  ##################################[ context: user@hostname ]##################################
  # Context color when running with privileges.
  typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1
  # Context color in SSH without privileges.
  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_FOREGROUND=7
  # Default context color (no privileges, no SSH).
  typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=7

  # Context format when running with privileges: bold user@hostname.
  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%B%n@%m'
  # Context format when in SSH without privileges: user@hostname.
  typeset -g POWERLEVEL9K_CONTEXT_{REMOTE,REMOTE_SUDO}_TEMPLATE='%n@%m'
  # Default context format (no privileges, no SSH): user@hostname.
  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'

  # Don't show context unless running with privileges or in SSH.
  # Tip: Remove the next line to always show context.
  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=

  # If set to true, time will update when you hit enter. This way prompts for the past
  # commands will contain the start times of their commands as opposed to the default
  # behavior where they contain the end times of their preceding commands.
  typeset -g POWERLEVEL9K_TIME_UPDATE_ON_COMMAND=true
  # Time color.
  typeset -g POWERLEVEL9K_TIME_FOREGROUND=8
  
  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
  # when accepting a command line. Supported values:
  #
  #   - off:      Don't change prompt when accepting a command line.
  #   - always:   Trim down prompt when accepting a command line.
  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
  #               typed after changing current working directory.
  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=off

  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=false

  function p10k-on-post-prompt() { p10k display '1|empty_line'=hide '2/right/*'=show }
  function p10k-on-pre-prompt()  { p10k display '1|empty_line'=show '2/right/*'=hide }

  # Instant prompt mode.
  #
  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
  #              it incompatible with your zsh configuration files.
  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
  #              during zsh initialization. Choose this if you've read and understood
  #              https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
  #   - verbose: Enable instant prompt and print a warning when detecting console output during
  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
  #              seen the warning, or if you are unsure what this all means.
  typeset -g POWERLEVEL9K_INSTANT_PROMPT=quiet

  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
  # really need it.
  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true

  # If p10k is already loaded, reload configuration.
  # This works even with POWERLEVEL9K_DISABLE_HOT_RELOAD=true.
  (( ! $+functions[p10k] )) || p10k reload
}

# Tell `p10k configure` which file it should overwrite.
typeset -g POWERLEVEL9K_CONFIG_FILE=${${(%):-%x}:a}

(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
'builtin' 'unset' 'p10k_config_opts'

[romkatv]

That's not possible. See https://github.com/romkatv/powerlevel10k?tab=readme-ov-file#can-prompts-for-completed-commands-display-error-status-for-those-commands-instead-of-the-commands-preceding-them. This FAQ entry is about error status but the same argument applies to command execution time: when the execution time of a command becomes known, it's too late to change the prompt that precedes it.

[anurag-roy]

Ah ok, that makes sense. Cool, I'll try to display the execution time on the left hand side and be done with it.

Thanks a lot!