This Helm chart is a lightweight way to configure and run our official Elasticsearch Docker image.
Warning: This branch is used for development, please use 7.7.1 release for supported version.
- Requirements
- Installing
- Upgrading
- Compatibility
- Usage notes
- Configuration
- FAQ
- How to deploy this chart on a specific K8S distribution?
- How to deploy dedicated nodes types?
- How to deploy clusters with security (authentication and TLS) enabled?
- How to migrate from helm/charts stable chart?
- How to install OSS version of Elasticsearch?
- How to install plugins?
- How to use the keystore?
- How to enable snapshotting?
- How to configure templates post-deployment?
- Contributing
- Helm >=2.8.0 and <3.0.0
- Kubernetes >=1.8
- Minimum cluster requirements include the following to run this chart with
default settings. All of these settings are configurable.
- Three Kubernetes nodes to respect the default "hard" affinity settings
- 1GB of RAM for the JVM heap
See supported configurations for more details.
-
Add the Elastic Helm charts repo:
helm repo add elastic https://helm.elastic.co -
Install it:
helm install --name elasticsearch elastic/elasticsearch
-
Clone the git repo:
git clone git@github.com:elastic/helm-charts.git -
Install it:
helm install --name elasticsearch ./helm-charts/elasticsearch --set imageTag=7.7.1
Please always check CHANGELOG.md and BREAKING_CHANGES.md before upgrading to a new chart version.
This chart is tested with the latest supported versions. The currently tested versions are:
| 6.x | 7.x |
|---|---|
| 6.8.10 | 7.7.1 |
Examples of installing older major versions can be found in the examples directory.
While only the latest releases are tested, it is possible to easily install old
or new releases by overriding the imageTag. To install version 7.7.1 of
Elasticsearch it would look like this:
helm install --name elasticsearch elastic/elasticsearch --set imageTag=7.7.1
- This repo includes a number of examples configurations which can be used as a reference. They are also used in the automated testing of this chart.
- Automated testing of this chart is currently only run against GKE (Google Kubernetes Engine).
- The chart deploys a StatefulSet and by default will do an automated rolling
update of your cluster. It does this by waiting for the cluster health to become
green after each instance is updated. If you prefer to update manually you can
set
OnDeleteupdateStrategy. - It is important to verify that the JVM heap size in
esJavaOptsand to set the CPU/Memoryresourcesto something suitable for your cluster. - To simplify chart and maintenance each set of node groups is deployed as a separate Helm release. Take a look at the multi example to get an idea for how this works. Without doing this it isn't possible to resize persistent volumes in a StatefulSet. By setting it up this way it makes it possible to add more nodes with a new storage size then drain the old ones. It also solves the problem of allowing the user to determine which node groups to update first when doing upgrades or changes.
- We have designed this chart to be very un-opinionated about how to configure Elasticsearch. It exposes ways to set environment variables and mount secrets inside of the container. Doing this makes it much easier for this chart to support multiple versions with minimal changes.
| Parameter | Description | Default |
|---|---|---|
antiAffinityTopologyKey |
The anti-affinity topology key. By default this will prevent multiple Elasticsearch nodes from running on the same Kubernetes node | kubernetes.io/hostname |
antiAffinity |
Setting this to hard enforces the anti-affinity rules. If it is set to soft it will be done "best effort". Other values will be ignored | hard |
clusterHealthCheckParams |
The Elasticsearch cluster health status params that will be used by readiness probe command | wait_for_status=green&timeout=1s |
clusterName |
This will be used as the Elasticsearch cluster.name and should be unique per cluster in the namespace | elasticsearch |
envFrom |
Templatable string to be passed to the environment from variables which will be appended to the envFrom: definition for the container |
[] |
esConfig |
Allows you to add any config files in /usr/share/elasticsearch/config/ such as elasticsearch.yml and log4j2.properties. See values.yaml for an example of the formatting |
{} |
esJavaOpts |
Java options for Elasticsearch. This is where you should configure the jvm heap size | -Xmx1g -Xms1g |
esMajorVersion |
Used to set major version specific configuration. If you are using a custom image and not running the default Elasticsearch version you will need to set this to the version you are running (e.g. esMajorVersion: 6) |
"" |
extraContainers |
Templatable string of additional containers to be passed to the tpl function |
"" |
extraEnvs |
Extra environment variables which will be appended to the env: definition for the container |
[] |
extraInitContainers |
Templatable string of additional initContainers to be passed to the tpl function |
"" |
extraVolumeMounts |
Templatable string of additional volumeMounts to be passed to the tpl function |
"" |
extraVolumes |
Templatable string of additional volumes to be passed to the tpl function |
"" |
fullnameOverride |
Overrides the clusterName and nodeGroup when used in the naming of resources. This should only be used when using a single nodeGroup, otherwise you will have name conflicts |
"" |
httpPort |
The http port that Kubernetes will use for the healthchecks and the service. If you change this you will also need to set http.port in extraEnvs |
9200 |
imagePullPolicy |
The Kubernetes imagePullPolicy value | IfNotPresent |
imagePullSecrets |
Configuration for imagePullSecrets so that you can use a private registry for your image | [] |
imageTag |
The Elasticsearch Docker image tag | 7.7.1 |
image |
The Elasticsearch Docker image | docker.elastic.co/elasticsearch/elasticsearch |
ingress |
Configurable ingress to expose the Elasticsearch service. See values.yaml for an example | see values.yaml |
initResources |
Allows you to set the resources for the initContainer in the StatefulSet |
{} |
keystore |
Allows you map Kubernetes secrets into the keystore. See the config example and how to use the keystore | [] |
labels |
Configurable labels applied to all Elasticsearch pods | {} |
lifecycle |
Allows you to add lifecycle hooks. See values.yaml for an example of the formatting | {} |
masterService |
The service name used to connect to the masters. You only need to set this if your master nodeGroup is set to something other than master. See Clustering and Node Discovery for more information |
"" |
masterTerminationFix |
A workaround needed for Elasticsearch < 7.2 to prevent master status being lost during restarts #63 | false |
maxUnavailable |
The maxUnavailable value for the pod disruption budget. By default this will prevent Kubernetes from having more than 1 unhealthy pod in the node group | 1 |
minimumMasterNodes |
The value for discovery.zen.minimum_master_nodes. Should be set to (master_eligible_nodes / 2) + 1. Ignored in Elasticsearch versions >= 7 |
2 |
nameOverride |
Overrides the clusterName when used in the naming of resources |
"" |
networkHost |
Value for the network.host Elasticsearch setting | 0.0.0.0 |
nodeAffinity |
Value for the node affinity settings | {} |
nodeGroup |
This is the name that will be used for each group of nodes in the cluster. The name will be clusterName-nodeGroup-X , nameOverride-nodeGroup-X if a nameOverride is specified, and fullnameOverride-X if a fullnameOverride is specified |
master |
nodeSelector |
Configurable nodeSelector so that you can target specific nodes for your Elasticsearch cluster | {} |
persistence |
Enables a persistent volume for Elasticsearch data. Can be disabled for nodes that only have roles which don't require persistent data | see values.yaml |
podAnnotations |
Configurable annotations applied to all Elasticsearch pods | {} |
podManagementPolicy |
By default Kubernetes deploys StatefulSets serially. This deploys them in parallel so that they can discover each other | Parallel |
podSecurityContext |
Allows you to set the securityContext for the pod | see values.yaml |
podSecurityPolicy |
Configuration for create a pod security policy with minimal permissions to run this Helm chart with create: true. Also can be used to reference an external pod security policy with name: "externalPodSecurityPolicy" |
see values.yaml |
priorityClassName |
The name of the PriorityClass. No default is supplied as the PriorityClass must be created first | "" |
protocol |
The protocol that will be used for the readiness probe. Change this to https if you have xpack.security.http.ssl.enabled set |
http |
rbac |
Configuration for creating a role, role binding and ServiceAccount as part of this Helm chart with create: true. Also can be used to reference an external ServiceAccount with serviceAccountName: "externalServiceAccountName" |
see values.yaml |
readinessProbe |
Configuration fields for the readiness probe | see values.yaml |
replicas |
Kubernetes replica count for the StatefulSet (i.e. how many pods) | 3 |
resources |
Allows you to set the resources for the StatefulSet | see values.yaml |
roles |
A hash map with the specific roles for the nodeGroup |
see values.yaml |
schedulerName |
Name of the alternate scheduler | "" |
secretMounts |
Allows you easily mount a secret as a file inside the StatefulSet. Useful for mounting certificates and other secrets. See values.yaml for an example | [] |
securityContext |
Allows you to set the securityContext for the container | see values.yaml |
service.annotations |
LoadBalancer annotations that Kubernetes will use for the service. This will configure load balancer if service.type is LoadBalancer |
{} |
service.httpPortName |
The name of the http port within the service | http |
service.labelsHeadless |
Labels to be added to headless service | {} |
service.labels |
Labels to be added to non-headless service | {} |
service.loadBalancerIP |
Some cloud providers allow you to specify the loadBalancer IP. If the loadBalancerIP field is not specified, the IP is dynamically assigned. If you specify a loadBalancerIP but your cloud provider does not support the feature, it is ignored. |
"" |
service.loadBalancerSourceRanges |
The IP ranges that are allowed to access | [] |
service.nodePort |
Custom nodePort port that can be set if you are using service.type: nodePort |
"" |
service.transportPortName |
The name of the transport port within the service | transport |
service.type |
Elasticsearch Service Types | ClusterIP |
sidecarResources |
Allows you to set the resources for the sidecar containers in the StatefulSet | {} |
sysctlInitContainer |
Allows you to disable the sysctlInitContainer if you are setting sysctl vm.max_map_count with another method |
enabled: true |
sysctlVmMaxMapCount |
Sets the sysctl vm.max_map_count needed for Elasticsearch | 262144 |
terminationGracePeriod |
The terminationGracePeriod in seconds used when trying to stop the pod | 120 |
tolerations |
Configurable tolerations | [] |
transportPort |
The transport port that Kubernetes will use for the service. If you change this you will also need to set transport port configuration in extraEnvs |
9300 |
updateStrategy |
The updateStrategy for the StatefulSet. By default Kubernetes will wait for the cluster to be green after upgrading each pod. Setting this to OnDelete will allow you to manually delete each pod during upgrades |
RollingUpdate |
volumeClaimTemplate |
Configuration for the volumeClaimTemplate for StatefulSets. You will want to adjust the storage (default 30Gi ) and the storageClassName if you are using a different storage class |
see values.yaml |
| Parameter | Description | Default |
|---|---|---|
fsGroup |
The Group ID (GID) for securityContext so that the Elasticsearch user can read from the persistent volume | "" |
This chart is designed to run on production scale Kubernetes clusters with multiple nodes, lots of memory and persistent storage. For that reason it can be a bit tricky to run them against local Kubernetes environments such as Minikube.
This chart is highly tested with GKE, but some K8S distribution also requires specific configurations.
We provide examples of configuration for the following K8S providers:
All the Elasticsearch pods deployed share the same configuration. If you need to
deploy dedicated nodes types (for example dedicated master and data nodes),
you can deploy multiple releases of this chart with different configurations
while they share the same clusterName value.
For each Helm release, the nodes types can then be defined using roles value.
An example of Elasticsearch cluster using 2 different Helm releases for master and data nodes can be found in examples/multi.
This chart facilitates Elasticsearch node discovery and services by creating two
Service definitions in Kubernetes, one with the name $clusterName-$nodeGroup
and another named $clusterName-$nodeGroup-headless.
Only Ready pods are a part of the $clusterName-$nodeGroup service, while all
pods ( Ready or not) are a part of $clusterName-$nodeGroup-headless.
If your group of master nodes has the default nodeGroup: master then you can
just add new groups of nodes with a different nodeGroup and they will
automatically discover the correct master. If your master nodes have a different
nodeGroup name then you will need to set masterService to
$clusterName-$masterNodeGroup.
The chart value for masterService is used to populate
discovery.zen.ping.unicast.hosts , which Elasticsearch nodes will use to
contact master nodes and form a cluster.
Therefore, to add a group of nodes to an existing cluster, setting
masterService to the desired Service name of the related cluster is
sufficient.
This Helm chart can use existing Kubernetes secrets to setup credentials or certificates for examples. These secrets should be created outside of this chart and accessed using environment variables and volumes.
An example of Elasticsearch cluster using security can be found in examples/security.
If you currently have a cluster deployed with the helm/charts stable chart you can follow the migration guide.
Deploying OSS version of Elasticsearch can be done by setting image value to
Elasticsearch OSS Docker image
An example of Elasticsearch cluster using OSS version can be found in examples/oss.
The recommended way to install plugins into our Docker images is to create a custom Docker image.
The Dockerfile would look something like:
ARG elasticsearch_version
FROM docker.elastic.co/elasticsearch/elasticsearch:${elasticsearch_version}
RUN bin/elasticsearch-plugin install --batch repository-gcs
And then updating the image in values to point to your custom image.
There are a couple reasons we recommend this.
- Tying the availability of Elasticsearch to the download service to install plugins is not a great idea or something that we recommend. Especially in Kubernetes where it is normal and expected for a container to be moved to another host at random times.
- Mutating the state of a running Docker image (by installing plugins) goes against best practices of containers and immutable infrastructure.
Create the secret, the key name needs to be the keystore key path. In this example we will create a secret from a file and from a literal string.
kubectl create secret generic encryption_key --from-file=xpack.watcher.encryption_key=./watcher_encryption_key
kubectl create secret generic slack_hook --from-literal=xpack.notification.slack.account.monitoring.secure_url='https://hooks.slack.com/services/asdasdasd/asdasdas/asdasd'
To add these secrets to the keystore:
keystore:
- secretName: encryption_key
- secretName: slack_hook
All keys in the secret will be added to the keystore. To create the previous example in one secret you could also do:
kubectl create secret generic keystore_secrets --from-file=xpack.watcher.encryption_key=./watcher_encryption_key --from-literal=xpack.notification.slack.account.monitoring.secure_url='https://hooks.slack.com/services/asdasdasd/asdasdas/asdasd'
keystore:
- secretName: keystore_secrets
If you are using these secrets for other applications (besides the Elasticsearch
keystore) then it is also possible to specify the keystore path and which keys
you want to add. Everything specified under each keystore item will be passed
through to the volumeMounts section for mounting the secret. In this
example we will only add the slack_hook key from a secret that also has other
keys. Our secret looks like this:
kubectl create secret generic slack_secrets --from-literal=slack_channel='#general' --from-literal=slack_hook='https://hooks.slack.com/services/asdasdasd/asdasdas/asdasd'
We only want to add the slack_hook key to the keystore at path
xpack.notification.slack.account.monitoring.secure_url:
keystore:
- secretName: slack_secrets
items:
- key: slack_hook
path: xpack.notification.slack.account.monitoring.secure_url
You can also take a look at the config example which is used as part of the automated testing pipeline.
- Install your snapshot plugin into a custom Docker image following the how to install plugins guide.
- Add any required secrets or credentials into an Elasticsearch keystore following the how to use the keystore guide.
- Configure the snapshot repository as you normally would.
- To automate snapshots you can use a tool like curator. In the future there are plans to have Elasticsearch manage automated snapshots with Snapshot Lifecycle Management.
You can use postStart lifecycle hooks to run code triggered after a
container is created.
Here is an example of postStart hook to configure templates:
lifecycle:
postStart:
exec:
command:
- bash
- -c
- |
#!/bin/bash
# Add a template to adjust number of shards/replicas
TEMPLATE_NAME=my_template
INDEX_PATTERN="logstash-*"
SHARD_COUNT=8
REPLICA_COUNT=1
ES_URL=http://localhost:9200
while [[ "$(curl -s -o /dev/null -w '%{http_code}\n' $ES_URL)" != "200" ]]; do sleep 1; done
curl -XPUT "$ES_URL/_template/$TEMPLATE_NAME" -H 'Content-Type: application/json' -d'{"index_patterns":['\""$INDEX_PATTERN"\"'],"settings":{"number_of_shards":'$SHARD_COUNT',"number_of_replicas":'$REPLICA_COUNT'}}'Please check CONTRIBUTING.md before any contribution or for any questions about our development and testing process.