Roborock Vacuum Bin full

[isabellaalstrom]

I was wondering about the possibility to implement the "bin full" state, as the app sends notifications about this. Is this information possible to get from the api?

[rezmus]

i'm not 100% sure, but i don't think you can fetch such info. i mean there is an event.bin_full, but no way to get events from local miio api.

[isabellaalstrom]

Alright, that's a bummer, but thank you!

[rezmus]

i've checked plugin and you should be able to get bin_full info when status is fetched. error code 644 is related to bin problems. just not sure if it works for older models like v1/s5.

[isabellaalstrom]

Is there any way I can test this for s5?

[rezmus]

make you bin full so you get push notification, then send "method":"get_status" and look for error_code value.

[isabellaalstrom]

I know this is a long time ago now, but I haven't really had the time. Today my bin got full though and I though of this. I don't really understand how I should do it. I installed so I can use the cli, but I'm not sure that's where I should be doing this?

[rytilahti]

When the bin is full, simply execute mirobo -d to see if the state or error_code in the returned payload indicates something about its state.

[isabellaalstrom]

This is what I got!

DEBUG:miio.miioprotocol:192.168.1.56:54321 >>: {'id': 3, 'method': 'get_status', 'params': []}
DEBUG:miio.miioprotocol:192.168.1.56:54321 (ts: 2020-04-02 12:48:08, id: 3) << {'result': [{'msg_ver': 3, 'msg_seq': 1953, 'state': 8, 'battery': 100, 'clean_time': 1132, 'clean_area': 21057500, 'error_code': 0, 'map_present': 1, 'in_cleaning': 0, 'in_returning': 0, 'in_fresh_state': 1, 'lab_status': 1, 'water_box_status': 0, 'fan_power': 101, 'dnd_enabled': 0, 'map_status': 3, 'lock_status': 0}], 'id': 3}
State: Charging
Battery: 100 %
Fanspeed: 101 %
Cleaning since: 0:18:52
Cleaned area: 21.0575 m²
DEBUG:miio.vacuum_cli:Writing {'seq': 3, 'manual_seq': 0} to /home/isabella/.cache/python-miio/python-mirobo.seq

[rytilahti]

Unfortunately there is nothing indicating that the bin is full. Does the vacuum allow starting it, or does it indicate an error at the moment you try to start it? If the latter, you could try executing the command straight after hearing the error, some errors are "reseted" after a while.