Unsupported device found - chuangmi.plug.hmi208

[MiSSHeaDShoT]

Hello,
This is a Xiaomi Mijia Smart Wi-fi plug with Bluetooth and can act as Bluetooth Gateway. I just saw the code and seems there is nothing like it.
https://www.gearbest.com/access-control/pp_009225999378.html

Any chances to be integrated ?

[rytilahti]

You could try to adjust https://github.com/rytilahti/python-miio/blob/master/miio/chuangmi_plug.py by adding a new entry after the hmi206, simply to see if it works directly.

[MiSSHeaDShoT]

I think it won't work as the Bluetooth gateway functionality is not in the other models. I could not find it implemented at all for Home Assistant ( for Xiaomi products). It was said somewhere that Xiaomi have not exposed and documented it in their SDK. As they released this plug in the end of 2019 I hope they will open our eyes for third party software.

[rytilahti]

Yes, the bluetooth functionality won't be there, but that would offer at least allow partial support.

[kghost]

Verified, it works with modification, partially

% miiocli plugv3 --ip XXXX --token XXXX info
Model: chuangmi.plug.hmi208
Hardware version: esp32
Firmware version: 2.0.5_0024
Network: {'localIp': 'XXXX', 'mask': '255.255.255.0', 'gw': 'XXXX'}
AP: {'ssid': 'XXXX', 'bssid': 'XXXX', 'rssi': -36, 'primary': 11}

% miiocli plugv3 --ip XXXX --token XXXX off 
Powering off
['ok']

% miiocli plugv3 --ip XXXX --token XXXX on 
Powering on
['ok']

% miiocli plugv3 --ip XXXX --token XXXX usb_off
Powering USB off
['ok']

% miiocli plugv3 --ip XXXX --token XXXX usb_on 
Powering USB on
['ok']

% miiocli plugv3 --ip XXXX --token XXXX status
Error: {'code': -9999, 'message': 'user ack timeout'}

[rytilahti]

@kghost could you try out the commands I mentioned in the issue I just linked here? The 'user ack timeout' error happens sometimes when requesting an unknown property / making a call that is not supported, which is unfortunately not that informative..

[kghost]

% miiocli device --ip XXXX --token XXXX raw_command get_prop '["power", "usb_on", "temperature"]'   
Running command raw_command
['on', True, 43]

[seoulop]

bash-5.0# miiocli device --ip xxx --token xxx info
Model: chuangmi.plug.hmi208
Hardware version: esp32
Firmware version: 2.0.5_0024
Network: {'localIp': 'xxx', 'mask': '255.255.255.0', 'gw': 'xxx'}
AP: {'ssid': 'xx', 'bssid': 'xx', 'rssi': -55, 'primary': 11}

bash-5.0# miiocli device --ip xxx --token xxx raw_command get_prop '["power", "temperature"]'
Running command raw_command
['on', 50]

bash-5.0# miiocli device --ip xxx --token xxx raw_command get_prop '["power", "usb_on", "temperature"]'
Running command raw_command
['on', True, 50]

bash-5.0# miiocli device --ip xxx --token xxx raw_command get_prop '["on", "usb_on", "temperature"]'
Running command raw_command
[True, 50]

bash-5.0# miiocli device --ip xxx --token xxx raw_command get_prop '["all"]'
Running command raw_command
[]

[AlexQuaken]

MODEL_CHUANGMI_PLUG_V3 = "chuangmi.plug.v3"
MODEL_CHUANGMI_PLUG_V1 = "chuangmi.plug.v1"
MODEL_CHUANGMI_PLUG_M1 = "chuangmi.plug.m1"
MODEL_CHUANGMI_PLUG_M3 = "chuangmi.plug.m3"
MODEL_CHUANGMI_PLUG_V2 = "chuangmi.plug.v2"
MODEL_CHUANGMI_PLUG_HMI205 = "chuangmi.plug.hmi205"
MODEL_CHUANGMI_PLUG_HMI206 = "chuangmi.plug.hmi206"
MODEL_CHUANGMI_PLUG_HMI208 = "chuangmi.plug.hmi208"

AVAILABLE_PROPERTIES = {
MODEL_CHUANGMI_PLUG_V1: ["on", "usb_on", "temperature"],
MODEL_CHUANGMI_PLUG_V3: ["on", "usb_on", "temperature", "wifi_led"],
MODEL_CHUANGMI_PLUG_M1: ["power", "temperature"],
MODEL_CHUANGMI_PLUG_M3: ["power", "temperature"],
MODEL_CHUANGMI_PLUG_V2: ["power", "temperature"],
MODEL_CHUANGMI_PLUG_HMI205: ["power", "temperature"],
MODEL_CHUANGMI_PLUG_HMI206: ["power", "temperature"],
MODEL_CHUANGMI_PLUG_HMI208: ["power", "temperature"],
}

Make changes as that, then copy to hassio by run command "docker cp /usr/share/hassio/homeassistant/chuangmi_plug.py homeassistant:/usr/local/lib/python3.7/site-packages/miio/chuangmi_plug.py" after that all my smart sockets makes inactive

lots of errors on all my smartsockets ip adresses
Unable to discover a device at address 192.168.0.79
19:18:33 – /usr/local/lib/python3.7/site-packages/miio/miioprotocol.py (ERROR) - первое сообщение получено 19:13:23 и повторялось 17 раз

somethig was wrong, after restore file from backup, error still not fix, mb i need do chmod + ?

[drudgebg]

MODEL_CHUANGMI_PLUG_V3 = "chuangmi.plug.v3"
MODEL_CHUANGMI_PLUG_V1 = "chuangmi.plug.v1"
MODEL_CHUANGMI_PLUG_M1 = "chuangmi.plug.m1"
MODEL_CHUANGMI_PLUG_M3 = "chuangmi.plug.m3"
MODEL_CHUANGMI_PLUG_V2 = "chuangmi.plug.v2"
MODEL_CHUANGMI_PLUG_HMI205 = "chuangmi.plug.hmi205"
MODEL_CHUANGMI_PLUG_HMI206 = "chuangmi.plug.hmi206"
MODEL_CHUANGMI_PLUG_HMI208 = "chuangmi.plug.hmi208"

AVAILABLE_PROPERTIES = {
    MODEL_CHUANGMI_PLUG_V1: ["on", "usb_on", "temperature"],
    MODEL_CHUANGMI_PLUG_V3: ["on", "usb_on", "temperature", "wifi_led"],
    MODEL_CHUANGMI_PLUG_M1: ["power", "temperature"],
    MODEL_CHUANGMI_PLUG_M3: ["power", "temperature"],
    MODEL_CHUANGMI_PLUG_V2: ["power", "temperature"],
    MODEL_CHUANGMI_PLUG_HMI205: ["power", "temperature"],
    MODEL_CHUANGMI_PLUG_HMI206: ["power", "temperature"],
    MODEL_CHUANGMI_PLUG_HMI208: ["power", "usb_on", "temperature"],
}


class ChuangmiPlugStatus:
    """Container for status reports from the plug."""

    def __init__(self, data: Dict[str, Any]) -> None:
        """
        Response of a Chuangmi Plug V1 (chuangmi.plug.v1)
        { 'power': True, 'usb_on': True, 'temperature': 32 }

        Response of a Chuangmi Plug V3 (chuangmi.plug.v3):
        { 'on': True, 'usb_on': True, 'temperature': 32, 'wifi_led': True }

        Response of a Chuangmi Plug HMI208 (chuangmi.plug.hmi208):
        { 'power': True, 'usb_on': True, 'temperature': 32 }
        """
        self.data = data

After this it works.

miiocli chuangmiplug --ip xxxx --token xxxx status
Power: False
USB Power: None
Temperature: 27 °C
Load power: None
WiFi LED: None

miiocli chuangmiplug --ip xxxx --token xxxx on
Powering on
['ok']

miiocli chuangmiplug --ip xxxx --token xxxx off
Powering off
['ok']

miiocli chuangmiplug --ip xxxx --token xxxx usb_on
Powering USB on
['ok']

miiocli chuangmiplug --ip xxxx --token xxxx usb_off
Powering USB off
['ok']

Work with Home Assistant after edit
lib64/python3.7/site-packages/homeassistant/components/xiaomi_miio/switch.py:

        vol.Required(CONF_HOST): cv.string,
        vol.Required(CONF_TOKEN): vol.All(cv.string, vol.Length(min=32, max=32)),
        vol.Optional(CONF_NAME, default=DEFAULT_NAME): cv.string,
        vol.Optional(CONF_MODEL): vol.In(
            [
                "chuangmi.plug.v1",
                "qmi.powerstrip.v1",
                "zimi.powerstrip.v2",
                "chuangmi.plug.m1",
                "chuangmi.plug.m3",
                "chuangmi.plug.v2",
                "chuangmi.plug.v3",
                "chuangmi.plug.hmi205",
                "chuangmi.plug.hmi206",
		"chuangmi.plug.hmi208",
                "lumi.acpartner.v3",
            ]


.......................

    if model in ["chuangmi.plug.v1", "chuangmi.plug.v3", "chuangmi.plug.hmi208"]:
        plug = ChuangmiPlug(host, token, model=model)

        # The device has two switchable channels (mains and a USB port).
        # A switch device per channel will be created.
        for channel_usb in [True, False]:
            device = ChuangMiPlugSwitch(name, plug, model, unique_id, channel_usb)
            devices.append(device)
            hass.data[DATA_KEY][host] = device

    elif model in ["qmi.powerstrip.v1", "zimi.powerstrip.v2"]:
        plug = PowerStrip(host, token, model=model)
        device = XiaomiPowerStripSwitch(name, plug, model, unique_id)
        devices.append(device)
        hass.data[DATA_KEY][host] = device
    elif model in [
        "chuangmi.plug.m1",
        "chuangmi.plug.m3",
        "chuangmi.plug.v2",
        "chuangmi.plug.hmi205",
        "chuangmi.plug.hmi206",
        "chuangmi.plug.hmi208",
    ]:

[rytilahti]

Could you confirm that the linked PR works and can be merged?

[biscuitee]

Could you confirm that the linked PR works and can be merged?

Hi, can I check if this will be merged into official release in HA miio component?

[rytilahti]

The homeassistant integration needs to be modified to accept this new device type. I think in the future we should add a list of known devices to python-miio that will remove the need to keep up two separate mappings of supported devices...

[biscuitee]

Hi, appreciate if expert here could share how could I add the chuangmi.plug.hmi208 support into my home assistant. I am running the Hassio homeassistant in Pi4.

I couldnt find the python package lib64/python3.7/site-packages/homeassistant/components/xiaomi_miio/switch.py: when I do a terminal in Home Assistant.

Any help is greatly appreciated.