-
Notifications
You must be signed in to change notification settings - Fork 0
/
SETTINGSv24.txt
123 lines (103 loc) · 2.81 KB
/
SETTINGSv24.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
SETTINGS FOR DD-WRT
Most settings are defaults.
Setup
WAN Setup
Router Name: DD-WRT
Domain Name: local
Local IP Address: 192.168.10.1
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
Local DNS: 0.0.0.0
DHCP Server: enabled
Start IP: 192.168.10.100
Static DNS1: 208.67.222.222 (OpenDNS)
Static DNS2: 208.67.220.220
Use DNSMasq for DHCP: yes
Use DNSMasq for DNS: yes
DHCP-authoriative: yes
NTP client: enabled
Time Zone: UTC-05:00
Summer Time DST: 2nd Sun Mar - first Sun Nov
Server IP/name: 3.us.pool.ntp.org
Advanced Routing
Operating Mode: Gateway
VLANS
VLAN0 port: 1,2,3,4 Assigned to Bridge: LAN
VLAN1 port: W
All enabled and auto-negotiate
Wireless: NONE (very important)
Networking
DHCPD
Add 192.168.25.1/255.255.255.0 as another DHCP addr.
Wireless
Basic Settings
Wireless Mode: AP
Wireless Network Mode: Mixed
Wireless SSID: GET_A_MACINTOSH
Wireless Channel: 6-2.437 Ghz
SSID broadcast: enable
Network configuration: unbridged
Multicast forwarding: disable
Masq/NAT: enable
IP Address: 192.168.25.1
Subnet Mask: 255.255.255.0
Wireless Security
Security Mode: WPA2 Personal
WPA Algorithms: AES
WPA Shared Key: ********
Services
DHCP server
Used Domain: LAN & WLAN
LAN Domain: local
Static Leases:
00:10:E0:03:25:44 gw 192.168.1.114
00:02:E3:3B:22:25 xppro 192.168.1.137
00:10:E0:04:BB:10 gentoo 192.168.1.140
00:0B:6B:4C:15:16 ferrari 192.168.25.141
00:0C:41:95:A4:70 printer 192.168.1.136
DNSMasq
DNSMasq: enable
Local DNS: enable
Secure Shell
sshd: enable
TCP forw: disable
Password login: enable
System Log
syslogd: Enable
Remote server: 192.168.1.137
Telnet: disable
WAN Traffic daemon: enable
Security
Firewall
SPI firewall: enable
Additional filters: none
Block WAN req: anonymous WAN requests, filter multicast, filter ident
LOG: enable
Level: high
Dropped: enable
Rejected: enable
Accepted: disable
VPN Passthrough
IPSec, PPTP, L2TP passthrough: enable
NAT/QoS
Port Forward
azureus-hp 61616 Both 192.168.10.137 61616 enabled
Administration
Management
Remote Access: disable
Boot wait: enable
Cron: enable
802.1x: enable
Reset Button: enable
Routing: disable
Language: english
MMC/SD card: disable
Frequency: 200MHz
Style: red
CIFS automount
CIFS: enable
share: //xppro/SharedDocs
Commands
Firewall
/etc/init.d/firewall-cmds (important to set this)
$Id: SETTINGSv24.txt,v 1.3 2010/04/18 16:54:13 sam Exp $