diff --git a/src/main/resources/biz_bg.properties b/src/main/resources/biz_bg.properties
index 4c74c470c..0754c7d5a 100644
--- a/src/main/resources/biz_bg.properties
+++ b/src/main/resources/biz_bg.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Ново планирано изпълнение
 SchedulerEntry.dayOfMonth = Ден
 SchedulerEntry.dayOfWeek = делничен ден
 SchedulerEntry.enabled = Активиран
+SchedulerEntry.executeNow = Изпълни сега
 SchedulerEntry.hourOfDay = час
 SchedulerEntry.invalidPattern = Записът "${pattern}" е невалиден, моля, обърнете внимание на информацията в полето.
 SchedulerEntry.invalidPatternInField = Невалидна стойност в поле ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Създаден
 TraceData.createdBy = Създадено от
 TraceData.entity = ИД на обект
 TraceData.infos = информация
+TransferFilesJob.continueOnError = Продължаване в случай на грешка
+TransferFilesJob.continueOnError.help = Ако тази опция е активирана, задачата ще продължи дори ако възникне грешка. Това е актуално само при обработка на съдържанието на директории.
 TransferFilesJob.description = Премества или копира един или повече файлове или директории.
 TransferFilesJob.destination = прицелвам се
 TransferFilesJob.detailDescription = Копира или премества един файл или директория в друг. Освен това пълното съдържание (всички файлове и поддиректории) на една директория може да бъде копирано или преместено в друга. Ако съдържанието на директорията се копира или премести, директория трябва да бъде избрана като източник и цел.
diff --git a/src/main/resources/biz_cs.properties b/src/main/resources/biz_cs.properties
index 6128cafd9..c1395ddaf 100644
--- a/src/main/resources/biz_cs.properties
+++ b/src/main/resources/biz_cs.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nové plánované provedení
 SchedulerEntry.dayOfMonth = Den
 SchedulerEntry.dayOfWeek = Všední den
 SchedulerEntry.enabled = Aktivováno
+SchedulerEntry.executeNow = Nyní spustit
 SchedulerEntry.hourOfDay = Hodina
 SchedulerEntry.invalidPattern = Položka '${pattern}' je neplatná, nezapomeňte si poznamenat poznámky k polím.
 SchedulerEntry.invalidPatternInField = Neplatná hodnota v poli ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Vytvořeno
 TraceData.createdBy = Vytvořil
 TraceData.entity = ID entity
 TraceData.infos = Informace
+TransferFilesJob.continueOnError = Pokračovat v případě chyby
+TransferFilesJob.continueOnError.help = Pokud je tato možnost aktivována, úloha pokračuje i v případě výskytu chyby. To je relevantní pouze při zpracování obsahu adresáře.
 TransferFilesJob.description = Přesune nebo zkopíruje jeden nebo více souborů nebo adresářů.
 TransferFilesJob.destination = cíl
 TransferFilesJob.detailDescription = Zkopíruje nebo přesune jeden soubor nebo adresář do jiného. Dále lze zkopírovat nebo přesunout do jiného adresáře celý obsah (všechny soubory a podadresáře) jednoho adresáře. Pokud se kopíruje nebo přesouvá obsah adresáře, musí být jako zdroj a cíl vybrán adresář.
diff --git a/src/main/resources/biz_da.properties b/src/main/resources/biz_da.properties
index 882f9a044..212994dfc 100644
--- a/src/main/resources/biz_da.properties
+++ b/src/main/resources/biz_da.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Ny planlagt udførelse
 SchedulerEntry.dayOfMonth = Dag
 SchedulerEntry.dayOfWeek = hverdag
 SchedulerEntry.enabled = Aktiveret
+SchedulerEntry.executeNow = Kør nu
 SchedulerEntry.hourOfDay = time
 SchedulerEntry.invalidPattern = Indtastningen '${pattern}' er ugyldig, vær opmærksom på feltoplysningerne.
 SchedulerEntry.invalidPatternInField = Ugyldig værdi i felt ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Oprettet på
 TraceData.createdBy = Lavet af
 TraceData.entity = Enheds-ID
 TraceData.infos = Information
+TransferFilesJob.continueOnError = Fortsæt i tilfælde af fejl
+TransferFilesJob.continueOnError.help = Hvis denne indstilling er aktiveret, fortsætter jobbet selv når en fejl opstår. Dette er kun relevant ved behandling af indhold i mapper.
 TransferFilesJob.description = Flytter eller kopierer en eller flere filer eller mapper.
 TransferFilesJob.destination = sigte
 TransferFilesJob.detailDescription = Kopierer eller flytter en enkelt fil eller mappe til en anden. Desuden kan det komplette indhold (alle filer og underkataloger) i en mappe kopieres eller flyttes til en anden. Hvis biblioteksindholdet kopieres eller flyttes, skal en mappe vælges som kilde og mål.
diff --git a/src/main/resources/biz_de.properties b/src/main/resources/biz_de.properties
index 561fd85af..08373348e 100644
--- a/src/main/resources/biz_de.properties
+++ b/src/main/resources/biz_de.properties
@@ -923,13 +923,13 @@ SchedulerEntry.create = Neue geplante Ausführung
 SchedulerEntry.dayOfMonth = Tag
 SchedulerEntry.dayOfWeek = Wochentag
 SchedulerEntry.enabled = Aktiviert
+SchedulerEntry.executeNow = Jetzt ausführen
 SchedulerEntry.hourOfDay = Stunde
 SchedulerEntry.invalidPattern = Die Eingabe '${pattern}' ist ungültig, bitte beachten Sie die Feldhinweise.
 SchedulerEntry.invalidPatternInField = Ungültiger Wert im Feld ${field}: ${msg}
 SchedulerEntry.lastExecution = Letzte Ausführung
 SchedulerEntry.minute = Minute
 SchedulerEntry.month = Monat
-SchedulerEntry.executeNow = Jetzt ausführen
 SchedulerEntry.numberOfExecutions = Anzahl Ausführungen
 SchedulerEntry.performedExecutions = Ausführungen
 SchedulerEntry.plural = Geplante Ausführungen
diff --git a/src/main/resources/biz_en.properties b/src/main/resources/biz_en.properties
index 9edfdc45d..26c7a8571 100644
--- a/src/main/resources/biz_en.properties
+++ b/src/main/resources/biz_en.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = New planned execution
 SchedulerEntry.dayOfMonth = Day
 SchedulerEntry.dayOfWeek = Weekday
 SchedulerEntry.enabled = Activated
+SchedulerEntry.executeNow = Execute now
 SchedulerEntry.hourOfDay = hour
 SchedulerEntry.invalidPattern = The input '${pattern}' is invalid, please refer to the field notes.
 SchedulerEntry.invalidPatternInField = Invalid value in field ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Created on
 TraceData.createdBy = Created by
 TraceData.entity = Entity-ID
 TraceData.infos = Information
+TransferFilesJob.continueOnError = Continue in case of error
+TransferFilesJob.continueOnError.help = If this option is enabled, the job will continue even if an error occurs. This is only relevant when processing directory contents.
 TransferFilesJob.description = Moves or copies one or more files or directories.
 TransferFilesJob.destination = aim
 TransferFilesJob.detailDescription = Copies or moves a single file or directory to another. Furthermore, the complete contents (all files and subdirectories) of one directory can be copied or moved to another. If directory contents are copied or moved, a directory must be selected as the source and target.
diff --git a/src/main/resources/biz_es.properties b/src/main/resources/biz_es.properties
index 438282f8f..295bcc08e 100644
--- a/src/main/resources/biz_es.properties
+++ b/src/main/resources/biz_es.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nueva ejecución planificada
 SchedulerEntry.dayOfMonth = Día
 SchedulerEntry.dayOfWeek = día laborable
 SchedulerEntry.enabled = Activado
+SchedulerEntry.executeNow = Ejecutar ahora
 SchedulerEntry.hourOfDay = hora
 SchedulerEntry.invalidPattern = La entrada '${pattern}' no es válida, tenga en cuenta la información del campo.
 SchedulerEntry.invalidPatternInField = Valor no válido en el campo ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Creado el
 TraceData.createdBy = Creado por
 TraceData.entity = ID de entidad
 TraceData.infos = información
+TransferFilesJob.continueOnError = Continuar en caso de error
+TransferFilesJob.continueOnError.help = Si esta opción está activada, el trabajo continuará incluso si ocurre un error. Esto solo es relevante al procesar el contenido de un directorio.
 TransferFilesJob.description = Mueve o copia uno o más archivos o directorios.
 TransferFilesJob.destination = objetivo
 TransferFilesJob.detailDescription = Copia o mueve un solo archivo o directorio a otro. Además, el contenido completo (todos los archivos y subdirectorios) de un directorio se puede copiar o mover a otro. Si el contenido del directorio se copia o mueve, se debe seleccionar un directorio como origen y destino.
diff --git a/src/main/resources/biz_fi.properties b/src/main/resources/biz_fi.properties
index c05957371..8578aa865 100644
--- a/src/main/resources/biz_fi.properties
+++ b/src/main/resources/biz_fi.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Uusi suunniteltu malli
 SchedulerEntry.dayOfMonth = Päivä
 SchedulerEntry.dayOfWeek = Arkipäivä
 SchedulerEntry.enabled = Aktivoi
+SchedulerEntry.executeNow = Suorita nyt
 SchedulerEntry.hourOfDay = Tunti
 SchedulerEntry.invalidPattern = Merkintä ${pattern} on virheellinen. Huomaa kentän tiedot.
 SchedulerEntry.invalidPatternInField = Virheellinen arvo kentässä ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Luotu
 TraceData.createdBy = Luonut
 TraceData.entity = Entity-ID
 TraceData.infos = Tiedot
+TransferFilesJob.continueOnError = Jatka virhetilanteessa
+TransferFilesJob.continueOnError.help = Jos tämä vaihtoehto on käytössä, tehtävä jatkuu, vaikka virhe tapahtuisi. Tämä on merkityksellistä vain hakemistosisällön käsittelyn yhteydessä.
 TransferFilesJob.description = Siirtää tai kopioi yhden tai useamman tiedoston tai hakemiston.
 TransferFilesJob.destination = Kohde
 TransferFilesJob.detailDescription = Kopioi tai siirtää yksittäisen tiedoston tai hakemiston toiseen. Lisäksi yhden hakemiston koko sisältö (kaikki tiedostot ja alihakemistot) voidaan kopioida tai siirtää toiseen hakemistoon. Kun kopioit tai siirrät hakemiston sisältöä, hakemisto on valittava lähde- ja kohdehakemistoksi.
diff --git a/src/main/resources/biz_fr.properties b/src/main/resources/biz_fr.properties
index 9065320bc..c86bb6346 100644
--- a/src/main/resources/biz_fr.properties
+++ b/src/main/resources/biz_fr.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nouvelle exécution prévue
 SchedulerEntry.dayOfMonth = Journée
 SchedulerEntry.dayOfWeek = Jour de la semaine
 SchedulerEntry.enabled = Activé
+SchedulerEntry.executeNow = Exécuter maintenant
 SchedulerEntry.hourOfDay = heure
 SchedulerEntry.invalidPattern = L'entrée "${pattern}" n'est pas valide, veuillez vous référer aux notes de terrain.
 SchedulerEntry.invalidPatternInField = Valeur non valable dans le champ ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Date de création
 TraceData.createdBy = Créé par
 TraceData.entity = ID d'entité
 TraceData.infos = Informations
+TransferFilesJob.continueOnError = Continuer en cas d'erreur
+TransferFilesJob.continueOnError.help = Si cette option est activée, le travail continuera même en cas d'erreur. Cela n'est pertinent que pour le traitement du contenu des répertoires.
 TransferFilesJob.description = Déplace ou copie un ou plusieurs fichiers ou répertoires.
 TransferFilesJob.destination = objectif
 TransferFilesJob.detailDescription = Copie ou déplace un seul fichier ou répertoire vers un autre. De plus, le contenu complet (tous les fichiers et sous-répertoires) d'un répertoire peut être copié ou déplacé vers un autre. Si le contenu du répertoire est copié ou déplacé, un répertoire doit être sélectionné comme source et cible.
diff --git a/src/main/resources/biz_hr.properties b/src/main/resources/biz_hr.properties
index 08db118f8..f7a3277e4 100644
--- a/src/main/resources/biz_hr.properties
+++ b/src/main/resources/biz_hr.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nova planirana izvedba
 SchedulerEntry.dayOfMonth = Dan
 SchedulerEntry.dayOfWeek = radni dan
 SchedulerEntry.enabled = Aktivirano
+SchedulerEntry.executeNow = Izvrši sada
 SchedulerEntry.hourOfDay = lekcija
 SchedulerEntry.invalidPattern = Unos '${pattern}' je nevažeći, imajte na umu podatke polja.
 SchedulerEntry.invalidPatternInField = Nevažeća vrijednost u polju ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Stvoreno na
 TraceData.createdBy = Napravio
 TraceData.entity = ID entiteta
 TraceData.infos = informacija
+TransferFilesJob.continueOnError = Nastavi u slučaju greške
+TransferFilesJob.continueOnError.help = Ako je ova opcija aktivirana, posao će se nastaviti čak i ako dođe do pogreške. Ovo je relevantno samo prilikom obrade sadržaja direktorija.
 TransferFilesJob.description = Premješta ili kopira jednu ili više datoteka ili direktorija.
 TransferFilesJob.destination = cilj
 TransferFilesJob.detailDescription = Kopira ili premješta jednu datoteku ili direktorij u drugi. Nadalje, kompletan sadržaj (sve datoteke i poddirektorije) jednog direktorija može se kopirati ili premjestiti u drugi. Ako se sadržaj direktorija kopira ili premješta, direktorij mora biti odabran kao izvor i cilj.
diff --git a/src/main/resources/biz_hu.properties b/src/main/resources/biz_hu.properties
index cb4e209c4..d429d6e27 100644
--- a/src/main/resources/biz_hu.properties
+++ b/src/main/resources/biz_hu.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Új tervezett végrehajtás
 SchedulerEntry.dayOfMonth = Nap
 SchedulerEntry.dayOfWeek = hétköznap
 SchedulerEntry.enabled = Aktív
+SchedulerEntry.executeNow = Most futtat
 SchedulerEntry.hourOfDay = óra
 SchedulerEntry.invalidPattern = A "${pattern}" bejegyzés érvénytelen, kérjük, vegye figyelembe a mező adatait.
 SchedulerEntry.invalidPatternInField = Érvénytelen érték a (z) ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Létrehozva
 TraceData.createdBy = Készítette
 TraceData.entity = Entitásazonosító
 TraceData.infos = információ
+TransferFilesJob.continueOnError = Hiba esetén folytatás
+TransferFilesJob.continueOnError.help = Ha ez az opció aktív, a munka akkor is folytatódik, ha hiba történik. Ez csak a könyvtártartalmak feldolgozásánál releváns.
 TransferFilesJob.description = Egy vagy több fájlt vagy könyvtárat mozgat vagy másol.
 TransferFilesJob.destination = cél
 TransferFilesJob.detailDescription = Egyetlen fájlt vagy könyvtárat másol vagy helyez át egy másikba. Ezenkívül az egyik könyvtár teljes tartalma (az összes fájl és alkönyvtár) másolható vagy áthelyezhető a másikba. Ha a könyvtár tartalmát másolják vagy áthelyezik, akkor egy könyvtárat kell kiválasztani forrásként és célként.
diff --git a/src/main/resources/biz_it.properties b/src/main/resources/biz_it.properties
index 618548d3b..96b3db9e3 100644
--- a/src/main/resources/biz_it.properties
+++ b/src/main/resources/biz_it.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nuova esecuzione pianificata
 SchedulerEntry.dayOfMonth = Giorno
 SchedulerEntry.dayOfWeek = Giorno feriale
 SchedulerEntry.enabled = Attivato
+SchedulerEntry.executeNow = Esegui ora
 SchedulerEntry.hourOfDay = ora
 SchedulerEntry.invalidPattern = L'input '${pattern}' non è valido, fare riferimento alle note del campo.
 SchedulerEntry.invalidPatternInField = Valore non valido nel campo ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Creato il
 TraceData.createdBy = Creato da
 TraceData.entity = ID entità
 TraceData.infos = Informazioni
+TransferFilesJob.continueOnError = Continua in caso di errore
+TransferFilesJob.continueOnError.help = Se questa opzione è attiva, il lavoro continuerà anche in caso di errore. Questo è rilevante solo per l'elaborazione dei contenuti della directory.
 TransferFilesJob.description = Sposta o copia uno o più file o directory.
 TransferFilesJob.destination = scopo
 TransferFilesJob.detailDescription = Copia o sposta un singolo file o directory in un altro. Inoltre, il contenuto completo (tutti i file e le sottodirectory) di una directory può essere copiato o spostato in un'altra. Se il contenuto della directory viene copiato o spostato, è necessario selezionare una directory come origine e destinazione.
diff --git a/src/main/resources/biz_lt.properties b/src/main/resources/biz_lt.properties
index cca59f361..836c39266 100644
--- a/src/main/resources/biz_lt.properties
+++ b/src/main/resources/biz_lt.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Naujas planuojamas vykdymas
 SchedulerEntry.dayOfMonth = Diena
 SchedulerEntry.dayOfWeek = savaitės diena
 SchedulerEntry.enabled = Aktyvuota
+SchedulerEntry.executeNow = Vykdyti dabar
 SchedulerEntry.hourOfDay = pamoka
 SchedulerEntry.invalidPattern = Įrašas "${pattern}" yra neteisingas, atkreipkite dėmesį į lauko informaciją.
 SchedulerEntry.invalidPatternInField = Netinkama vertė lauke ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Sukurtas
 TraceData.createdBy = Sukurta
 TraceData.entity = Subjekto ID
 TraceData.infos = informacija
+TransferFilesJob.continueOnError = Tęsti, jei įvyko klaida
+TransferFilesJob.continueOnError.help = Jeigu ši parinktis yra įjungta, darbas bus tęsiamas net ir tada, kai įvyksta klaida. Tai yra svarbu tik dirbtuvių turinio apdorojimo metu.
 TransferFilesJob.description = Perkelia arba kopijuoja vieną ar daugiau failų ar katalogų.
 TransferFilesJob.destination = tikslas
 TransferFilesJob.detailDescription = Kopijuoja arba perkelia vieną failą ar katalogą į kitą. Be to, visą vieno katalogo turinį (visus failus ir pakatalogius) galima nukopijuoti arba perkelti į kitą. Jei katalogo turinys kopijuojamas arba perkeliamas, kaip šaltinį ir tikslą reikia pasirinkti katalogą.
diff --git a/src/main/resources/biz_lv.properties b/src/main/resources/biz_lv.properties
index d3db46212..640154b90 100644
--- a/src/main/resources/biz_lv.properties
+++ b/src/main/resources/biz_lv.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Jauna plānotā izpilde
 SchedulerEntry.dayOfMonth = diena
 SchedulerEntry.dayOfWeek = darba diena
 SchedulerEntry.enabled = Aktivizēts
+SchedulerEntry.executeNow = Izpildīt tagad
 SchedulerEntry.hourOfDay = nodarbība
 SchedulerEntry.invalidPattern = Ieraksts '${pattern}' nav derīgs. Lūdzu, ņemiet vērā lauka informāciju.
 SchedulerEntry.invalidPatternInField = Nederīga vērtība laukā ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Izveidots
 TraceData.createdBy = Radīts
 TraceData.entity = Entītijas ID
 TraceData.infos = informāciju
+TransferFilesJob.continueOnError = Turpināt gadījumā, ja notiek kļūda
+TransferFilesJob.continueOnError.help = Ja šī opcija ir aktivizēta, darbs turpināsies arī tad, ja radīsies kļūda. Tas ir svarīgi tikai direktoriju satura apstrādē.
 TransferFilesJob.description = Pārvieto vai kopē vienu vai vairākus failus vai direktorijus.
 TransferFilesJob.destination = mērķis
 TransferFilesJob.detailDescription = Kopē vai pārvieto vienu failu vai direktoriju uz citu. Turklāt visu viena direktorija saturu (visus failus un apakšdirektorijas) var kopēt vai pārvietot uz citu. Ja direktorija saturs tiek kopēts vai pārvietots, direktorijs ir jāizvēlas kā avots un mērķis.
diff --git a/src/main/resources/biz_nl.properties b/src/main/resources/biz_nl.properties
index 048fab059..cd6534559 100644
--- a/src/main/resources/biz_nl.properties
+++ b/src/main/resources/biz_nl.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nieuwe geplande uitvoering
 SchedulerEntry.dayOfMonth = Dag
 SchedulerEntry.dayOfWeek = Weekdag
 SchedulerEntry.enabled = Geactiveerd
+SchedulerEntry.executeNow = Nu uitvoeren
 SchedulerEntry.hourOfDay = uur
 SchedulerEntry.invalidPattern = De invoer '${pattern}' is ongeldig, zie de veldnotities.
 SchedulerEntry.invalidPatternInField = Ongeldige waarde in veld ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Opgesteld op
 TraceData.createdBy = Gemaakt door
 TraceData.entity = Entiteit-ID
 TraceData.infos = Informatie
+TransferFilesJob.continueOnError = Doorgaan in geval van fout
+TransferFilesJob.continueOnError.help = Als deze optie is ingeschakeld, gaat de taak door, zelfs als er een fout optreedt. Dit is alleen relevant bij het verwerken van directory-inhoud.
 TransferFilesJob.description = Verplaatst of kopieert een of meer bestanden of mappen.
 TransferFilesJob.destination = doel
 TransferFilesJob.detailDescription = Kopieert of verplaatst een enkel bestand of directory naar een andere. Bovendien kan de volledige inhoud (alle bestanden en submappen) van de ene map worden gekopieerd of verplaatst naar een andere. Als de inhoud van de directory wordt gekopieerd of verplaatst, moet een directory worden geselecteerd als bron en doel.
diff --git a/src/main/resources/biz_no.properties b/src/main/resources/biz_no.properties
index 3a7c0d94e..b48ab644f 100644
--- a/src/main/resources/biz_no.properties
+++ b/src/main/resources/biz_no.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Ny planlagt utførelse
 SchedulerEntry.dayOfMonth = Dag
 SchedulerEntry.dayOfWeek = ukedag
 SchedulerEntry.enabled = Aktivert
+SchedulerEntry.executeNow = Kjør nå
 SchedulerEntry.hourOfDay = lekse
 SchedulerEntry.invalidPattern = Oppføringen '${pattern}' er ugyldig, vær oppmerksom på feltinformasjonen.
 SchedulerEntry.invalidPatternInField = Ugyldig verdi i feltet ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Opprettet den
 TraceData.createdBy = Laget av
 TraceData.entity = Enhets-ID
 TraceData.infos = informasjon
+TransferFilesJob.continueOnError = Fortsett i tilfelle feil
+TransferFilesJob.continueOnError.help = Hvis denne alternativet er aktivert, vil jobben fortsette selv om det oppstår en feil. Dette er bare relevant når du behandler innholdet i en katalog.
 TransferFilesJob.description = Flytter eller kopierer én eller flere filer eller kataloger.
 TransferFilesJob.destination = mål
 TransferFilesJob.detailDescription = Kopierer eller flytter en enkelt fil eller katalog til en annen. Videre kan det komplette innholdet (alle filer og underkataloger) i en katalog kopieres eller flyttes til en annen. Hvis kataloginnhold kopieres eller flyttes, må en katalog velges som kilde og mål.
diff --git a/src/main/resources/biz_pl.properties b/src/main/resources/biz_pl.properties
index 907c98a87..14e4a8342 100644
--- a/src/main/resources/biz_pl.properties
+++ b/src/main/resources/biz_pl.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nowa planowana realizacja
 SchedulerEntry.dayOfMonth = Dzień
 SchedulerEntry.dayOfWeek = Dzień tygodnia
 SchedulerEntry.enabled = Aktywowany
+SchedulerEntry.executeNow = Uruchom teraz
 SchedulerEntry.hourOfDay = Godzina
 SchedulerEntry.invalidPattern = Wpis "${pattern}" jest nieważny, patrz uwagi do pól.
 SchedulerEntry.invalidPatternInField = Nieważna wartość w polu ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Utworzono dnia
 TraceData.createdBy = Stworzony przez
 TraceData.entity = Identyfikator jednostki
 TraceData.infos = Informacja
+TransferFilesJob.continueOnError = Kontynuować w przypadku błędu
+TransferFilesJob.continueOnError.help = Jeśli ta opcja jest włączona, praca będzie kontynuowana nawet w przypadku wystąpienia błędu. Ma to znaczenie tylko podczas przetwarzania zawartości katalogu.
 TransferFilesJob.description = Przenosi lub kopiuje jeden lub więcej plików lub katalogów.
 TransferFilesJob.destination = cel
 TransferFilesJob.detailDescription = Kopiuje lub przenosi pojedynczy plik lub katalog do innego. Ponadto całą zawartość (wszystkie pliki i podkatalogi) jednego katalogu można skopiować lub przenieść do innego. Jeśli zawartość katalogu jest kopiowana lub przenoszona, jako źródło i cel należy wybrać katalog.
diff --git a/src/main/resources/biz_pt.properties b/src/main/resources/biz_pt.properties
index 12b553632..d5c9a2e4c 100644
--- a/src/main/resources/biz_pt.properties
+++ b/src/main/resources/biz_pt.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Novo desenho planeado
 SchedulerEntry.dayOfMonth = Dia
 SchedulerEntry.dayOfWeek = Dia da semana
 SchedulerEntry.enabled = Activa
+SchedulerEntry.executeNow = Executar agora
 SchedulerEntry.hourOfDay = Hora
 SchedulerEntry.invalidPattern = A entrada '${pattern}' é inválida, observe as informações do campo.
 SchedulerEntry.invalidPatternInField = Valor inválido no campo ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Criado em
 TraceData.createdBy = Criado por
 TraceData.entity = ID da entidade
 TraceData.infos = Informação
+TransferFilesJob.continueOnError = Continuar em caso de erro
+TransferFilesJob.continueOnError.help = Se essa opção estiver ativada, o trabalho continuará mesmo se ocorrer um erro. Isso é relevante apenas para o processamento de conteúdo de diretórios.
 TransferFilesJob.description = Move ou copia um ou mais ficheiros ou directórios.
 TransferFilesJob.destination = Destino
 TransferFilesJob.detailDescription = Copia ou move um único ficheiro ou directório para outro. Além disso, o conteúdo completo (todos os ficheiros e subdirectórios) de um directório pode ser copiado ou movido para outro. Ao copiar ou mover conteúdos de directórios, um directório deve ser seleccionado como a fonte e o destino.
diff --git a/src/main/resources/biz_ro.properties b/src/main/resources/biz_ro.properties
index e907456b7..c2ba6f1e1 100644
--- a/src/main/resources/biz_ro.properties
+++ b/src/main/resources/biz_ro.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nouă execuție planificată
 SchedulerEntry.dayOfMonth = Zi
 SchedulerEntry.dayOfWeek = ziua săptămânii
 SchedulerEntry.enabled = Activat
+SchedulerEntry.executeNow = Execută acum
 SchedulerEntry.hourOfDay = ora
 SchedulerEntry.invalidPattern = Intrarea "${pattern}" este nevalidă, vă rugăm să rețineți informațiile despre câmp.
 SchedulerEntry.invalidPatternInField = Valoare nevalidă în câmpul ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Creat in
 TraceData.createdBy = Creat de
 TraceData.entity = ID-entitate
 TraceData.infos = informație
+TransferFilesJob.continueOnError = Continuați în caz de eroare
+TransferFilesJob.continueOnError.help = Dacă această opțiune este activată, jobul va continua chiar și atunci când apare o eroare. Acest lucru este relevant doar în cazul procesării conținutului unui director.
 TransferFilesJob.description = Mută sau copiază unul sau mai multe fișiere sau directoare.
 TransferFilesJob.destination = scop
 TransferFilesJob.detailDescription = Copiază sau mută un singur fișier sau director în altul. În plus, conținutul complet (toate fișierele și subdirectoarele) dintr-un director poate fi copiat sau mutat în altul. Dacă conținutul directorului este copiat sau mutat, trebuie selectat un director ca sursă și țintă.
diff --git a/src/main/resources/biz_ru.properties b/src/main/resources/biz_ru.properties
index 0a2bd29c4..ff6670f77 100644
--- a/src/main/resources/biz_ru.properties
+++ b/src/main/resources/biz_ru.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Новое плановое исполнение
 SchedulerEntry.dayOfMonth = День
 SchedulerEntry.dayOfWeek = будний день
 SchedulerEntry.enabled = активированная
+SchedulerEntry.executeNow = Выполнить сейчас
 SchedulerEntry.hourOfDay = час
 SchedulerEntry.invalidPattern = Запись '${pattern}' недопустима, обратите внимание на примечания к полю.
 SchedulerEntry.invalidPatternInField = Неверное значение в поле ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Созданный на
 TraceData.createdBy = Создан
 TraceData.entity = Идентификатор объекта
 TraceData.infos = Информация
+TransferFilesJob.continueOnError = Продолжить в случае ошибки
+TransferFilesJob.continueOnError.help = Если этот параметр активирован, задание будет продолжено даже в случае возникновения ошибки. Это актуально только при обработке содержимого каталога.
 TransferFilesJob.description = Перемещает или копирует один или несколько файлов или каталогов.
 TransferFilesJob.destination = цель
 TransferFilesJob.detailDescription = Копирует или перемещает один файл или каталог в другой. Кроме того, полное содержимое (все файлы и подкаталоги) одного каталога можно скопировать или переместить в другой. Если содержимое каталога копируется или перемещается, каталог должен быть выбран в качестве источника и места назначения.
diff --git a/src/main/resources/biz_sk.properties b/src/main/resources/biz_sk.properties
index 0ca2c4dd7..a82629a6f 100644
--- a/src/main/resources/biz_sk.properties
+++ b/src/main/resources/biz_sk.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nové plánované provedení
 SchedulerEntry.dayOfMonth = Den
 SchedulerEntry.dayOfWeek = Všední den
 SchedulerEntry.enabled = Aktivováno
+SchedulerEntry.executeNow = Vykonať teraz
 SchedulerEntry.hourOfDay = Hodina
 SchedulerEntry.invalidPattern = Položka '${pattern}' je neplatná, všimnite si prosím informácie o poli.
 SchedulerEntry.invalidPatternInField = Neplatná hodnota v poli ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Vytvořeno
 TraceData.createdBy = Vytvořil
 TraceData.entity = Identifikátor entity
 TraceData.infos = Informace
+TransferFilesJob.continueOnError = Pokračovať v prípade chyby
+TransferFilesJob.continueOnError.help = Ak je táto možnosť aktivovaná, úloha sa pokračuje aj v prípade výskytu chyby. Toto je relevantné iba pri spracovaní obsahu priečinka.
 TransferFilesJob.description = Presunie alebo skopíruje jeden alebo viac súborov alebo adresárov.
 TransferFilesJob.destination = cieľ
 TransferFilesJob.detailDescription = Skopíruje alebo presunie jeden súbor alebo adresár do iného. Ďalej je možné kopírovať alebo presúvať kompletný obsah (všetky súbory a podadresáre) jedného adresára do iného. Ak sa kopíruje alebo presúva obsah adresára, musí sa zvoliť adresár ako zdroj a cieľ.
diff --git a/src/main/resources/biz_sl.properties b/src/main/resources/biz_sl.properties
index 0871430a2..e21630ef7 100644
--- a/src/main/resources/biz_sl.properties
+++ b/src/main/resources/biz_sl.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nova načrtovana izvedba
 SchedulerEntry.dayOfMonth = dan
 SchedulerEntry.dayOfWeek = delovni dan
 SchedulerEntry.enabled = Aktivirano
+SchedulerEntry.executeNow = Izvedi zdaj
 SchedulerEntry.hourOfDay = lekcijo
 SchedulerEntry.invalidPattern = Vnos '${pattern}' je neveljaven, upoštevajte podatke polja.
 SchedulerEntry.invalidPatternInField = Neveljavna vrednost v polju ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Ustvarjeno na
 TraceData.createdBy = Ustvaril
 TraceData.entity = ID entitete
 TraceData.infos = informacije
+TransferFilesJob.continueOnError = Nadaljuj v primeru napake
+TransferFilesJob.continueOnError.help = Če je ta možnost aktivirana, se delo nadaljuje tudi, če pride do napake. To je pomembno samo pri obdelavi vsebine imenika.
 TransferFilesJob.description = Premakne ali kopira eno ali več datotek ali imenikov.
 TransferFilesJob.destination = meriti
 TransferFilesJob.detailDescription = Kopira ali premakne eno datoteko ali imenik v drugo. Poleg tega lahko celotno vsebino (vse datoteke in podimenike) enega imenika kopirate ali premaknete v drugega. Če se vsebina imenika kopira ali premakne, mora biti imenik izbran kot vir in cilj.
diff --git a/src/main/resources/biz_sr.properties b/src/main/resources/biz_sr.properties
index 66273ca45..076467257 100644
--- a/src/main/resources/biz_sr.properties
+++ b/src/main/resources/biz_sr.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Ново планирано извршење
 SchedulerEntry.dayOfMonth = Дан
 SchedulerEntry.dayOfWeek = радни дан
 SchedulerEntry.enabled = Активирано
+SchedulerEntry.executeNow = Изврши сада
 SchedulerEntry.hourOfDay = лекција
 SchedulerEntry.invalidPattern = Унос "${pattern}" је неважећи, имајте на уму информације у пољу.
 SchedulerEntry.invalidPatternInField = Неважећа вредност у пољу ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Направљено дана
 TraceData.createdBy = Цреатед би
 TraceData.entity = Ентити-ИД
 TraceData.infos = информације
+TransferFilesJob.continueOnError = Nastavi u slučaju greške
+TransferFilesJob.continueOnError.help = Ako je ova opcija aktivirana, posao će se nastaviti čak i kada dođe do greške. Ovo je relevantno samo prilikom obrade sadržaja direktorijuma.
 TransferFilesJob.description = Премешта или копира једну или више датотека или директоријума.
 TransferFilesJob.destination = циљ
 TransferFilesJob.detailDescription = Копира или премешта једну датотеку или директоријум у други. Штавише, комплетан садржај (све датотеке и поддиректоријуми) једног директоријума може се копирати или преместити у други. Ако се садржај директоријума копира или премешта, директоријум мора бити изабран као извор и циљ.
diff --git a/src/main/resources/biz_sv.properties b/src/main/resources/biz_sv.properties
index b41753507..68f037b13 100644
--- a/src/main/resources/biz_sv.properties
+++ b/src/main/resources/biz_sv.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Nytt planerat utförande
 SchedulerEntry.dayOfMonth = Dag
 SchedulerEntry.dayOfWeek = veckodag
 SchedulerEntry.enabled = Aktiverad
+SchedulerEntry.executeNow = Kör nu
 SchedulerEntry.hourOfDay = timme
 SchedulerEntry.invalidPattern = Inmatningen "${pattern}" är ogiltig. Observera fältinformationen.
 SchedulerEntry.invalidPatternInField = Ogiltigt värde i fältet ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Skapad på
 TraceData.createdBy = Skapad av
 TraceData.entity = Enhets-ID
 TraceData.infos = information
+TransferFilesJob.continueOnError = Fortsätt vid fel
+TransferFilesJob.continueOnError.help = Om detta alternativ är aktiverat kommer jobbet att fortsätta även om ett fel inträffar. Detta är endast relevant vid bearbetning av kataloginnehåll.
 TransferFilesJob.description = Flyttar eller kopierar en eller flera filer eller kataloger.
 TransferFilesJob.destination = syfte
 TransferFilesJob.detailDescription = Kopierar eller flyttar en fil eller katalog till en annan. Dessutom kan hela innehållet (alla filer och underkataloger) i en katalog kopieras eller flyttas till en annan. Om kataloginnehåll kopieras eller flyttas måste en katalog väljas som källa och mål.
diff --git a/src/main/resources/biz_tr.properties b/src/main/resources/biz_tr.properties
index e83ce5642..f2742d5a8 100644
--- a/src/main/resources/biz_tr.properties
+++ b/src/main/resources/biz_tr.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Yeni planlanan yürütme
 SchedulerEntry.dayOfMonth = Gün
 SchedulerEntry.dayOfWeek = Hafta içi
 SchedulerEntry.enabled = Aktif
+SchedulerEntry.executeNow = Şimdi çalıştır
 SchedulerEntry.hourOfDay = saat
 SchedulerEntry.invalidPattern = '${pattern}' girişi geçersiz, lütfen alan notlarına bakın.
 SchedulerEntry.invalidPatternInField = ${field} alanında geçersiz değer: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Oluşturuldu
 TraceData.createdBy = Tarafından yaratıldı
 TraceData.entity = Varlık Kimliği
 TraceData.infos = Bilgi
+TransferFilesJob.continueOnError = Hata durumunda devam et
+TransferFilesJob.continueOnError.help = Bu seçenek etkinleştirildiğinde, bir hata oluştuğunda bile işlem devam eder. Bu, yalnızca dizin içeriklerinin işlenmesiyle ilgilidir.
 TransferFilesJob.description = Bir veya daha fazla dosya veya dizini taşır veya kopyalar.
 TransferFilesJob.destination = amaç
 TransferFilesJob.detailDescription = Tek bir dosyayı veya dizini diğerine kopyalar veya taşır. Ayrıca, bir dizinin tüm içeriği (tüm dosyalar ve alt dizinler) kopyalanabilir veya diğerine taşınabilir. Dizin içeriği kopyalanır veya taşınırsa, kaynak ve hedef olarak bir dizin seçilmelidir.
diff --git a/src/main/resources/biz_uk.properties b/src/main/resources/biz_uk.properties
index f4db2cd09..8accd1237 100644
--- a/src/main/resources/biz_uk.properties
+++ b/src/main/resources/biz_uk.properties
@@ -923,6 +923,7 @@ SchedulerEntry.create = Нове планове виконання
 SchedulerEntry.dayOfMonth = День
 SchedulerEntry.dayOfWeek = будній день
 SchedulerEntry.enabled = Активовано
+SchedulerEntry.executeNow = Виконати зараз
 SchedulerEntry.hourOfDay = урок
 SchedulerEntry.invalidPattern = Запис "${pattern}" недійсний, зверніть увагу на інформацію в полі.
 SchedulerEntry.invalidPatternInField = Недійсне значення в полі ${field}: ${msg}
@@ -1044,6 +1045,8 @@ TraceData.createdAt = Створено на
 TraceData.createdBy = Створений
 TraceData.entity = Entity-ID
 TraceData.infos = інформації
+TransferFilesJob.continueOnError = Продовжити у випадку помилки
+TransferFilesJob.continueOnError.help = Якщо ця опція активована, робота буде продовжуватися навіть у випадку помилки. Це актуально лише при обробці вмісту директорії.
 TransferFilesJob.description = Переміщує або копіює один або кілька файлів або каталогів.
 TransferFilesJob.destination = ціль
 TransferFilesJob.detailDescription = Копіює або переміщує один файл або каталог в інший. Крім того, повний вміст (усі файли та підкаталоги) одного каталогу можна скопіювати або перемістити в інший. Якщо вміст каталогу скопійовано або переміщено, каталог має бути обраний як джерело та цільовий каталог.