-
Notifications
You must be signed in to change notification settings - Fork 0
/
modbus.c
117 lines (97 loc) · 6.24 KB
/
modbus.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
/*! @file modbus.c
* @brief Contails functions to controll a modbus buscoupler.
*
* This file defines functions to drive the modbus interface. These function may be used to send messages to a modbus buscoupler
*/
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <termios.h>
#include <string.h>
#include <unistd.h>
// #define DEBUG
#include "modbus.h"
/*! @brief The bit-rate to be used by the serial adapter for the modbus interface. */
#define BAUDRATE B115200
/*! @brief The device the serial interface is mapped to. */
#define CONSOLE_DEVICE "/dev/ttyBF0"
/*! @brief Length of one message to set the status of the valves. */
#define MESSAGE_LENGTH 9
/*! @brief Address of the buscoupler. */
#define MODBUS_ADDRESS 1
struct {
/*! @brief File descriptor we get to access the device. */
int fd;
/*! @brief Buffer for the message and the CRC. */
uint8 message[MESSAGE_LENGTH + 2];
} modbus;
/*! @brief Adds the CRC to the last two bytes of modbus.message. */
void calculateCRC()
{
/* Table of CRC values for high-order byte */
static unsigned char auchCRCHi[] = { 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40, 0x01, 0xc0, 0x80, 0x41, 0x01, 0xc0, 0x80, 0x41, 0x00, 0xc1, 0x81, 0x40 };
/* Table of CRC values for low-order byte */
static char auchCRCLo[] = { 0x00, 0xc0, 0xc1, 0x01, 0xc3, 0x03, 0x02, 0xc2, 0xc6, 0x06, 0x07, 0xc7, 0x05, 0xc5, 0xc4, 0x04, 0xCc, 0x0c, 0x0d, 0xcd, 0x0f, 0xcf, 0xce, 0x0e, 0x0a, 0xca, 0xcb, 0x0b, 0xc9, 0x09, 0x08, 0xc8, 0xd8, 0x18, 0x19, 0xd9, 0x1b, 0xdb, 0xda, 0x1a, 0x1e, 0xde, 0xdf, 0x1f, 0xDd, 0x1d, 0x1c, 0xdc, 0x14, 0xd4, 0xd5, 0x15, 0xd7, 0x17, 0x16, 0xd6, 0xd2, 0x12, 0x13, 0xd3, 0x11, 0xd1, 0xd0, 0x10, 0xf0, 0x30, 0x31, 0xf1, 0x33, 0xf3, 0xf2, 0x32, 0x36, 0xf6, 0xf7, 0x37, 0xf5, 0x35, 0x34, 0xf4, 0x3c, 0xfc, 0xfd, 0x3d, 0xFf, 0x3f, 0x3e, 0xfe, 0xfa, 0x3a, 0x3b, 0xfb, 0x39, 0xf9, 0xf8, 0x38, 0x28, 0xe8, 0xe9, 0x29, 0xeb, 0x2b, 0x2a, 0xea, 0xEe, 0x2e, 0x2f, 0xef, 0x2d, 0xed, 0xec, 0x2c, 0xe4, 0x24, 0x25, 0xe5, 0x27, 0xe7, 0xe6, 0x26, 0x22, 0xe2, 0xe3, 0x23, 0xe1, 0x21, 0x20, 0xe0, 0xa0, 0x60, 0x61, 0xa1, 0x63, 0xa3, 0xa2, 0x62, 0x66, 0xa6, 0xa7, 0x67, 0xa5, 0x65, 0x64, 0xa4, 0x6c, 0xac, 0xad, 0x6d, 0xaf, 0x6f, 0x6e, 0xae, 0xAa, 0x6a, 0x6b, 0xab, 0x69, 0xa9, 0xa8, 0x68, 0x78, 0xb8, 0xb9, 0x79, 0xBb, 0x7b, 0x7a, 0xba, 0xbe, 0x7e, 0x7f, 0xbf, 0x7d, 0xbd, 0xbc, 0x7c, 0xb4, 0x74, 0x75, 0xb5, 0x77, 0xb7, 0xb6, 0x76, 0x72, 0xb2, 0xb3, 0x73, 0xb1, 0x71, 0x70, 0xb0, 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54, 0x9c, 0x5c, 0x5d, 0x9d, 0x5f, 0x9f, 0x9e, 0x5e, 0x5a, 0x9a, 0x9b, 0x5b, 0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89, 0x4b, 0x8b, 0x8a, 0x4a, 0x4e, 0x8e, 0x8f, 0x4f, 0x8d, 0x4d, 0x4c, 0x8c, 0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80, 0x40 };
uint8 uchCRCHi = 0xff, uchCRCLo = 0xff;
t_index i, uIndex;
/* pass through message buffer*/
for (i = 0; i < MESSAGE_LENGTH; i += 1)
{
/* calculate the CRC*/
uIndex = uchCRCHi ^ modbus.message[i];
uchCRCHi = uchCRCLo ^ auchCRCHi[uIndex];
uchCRCLo = auchCRCLo[uIndex];
}
modbus.message[MESSAGE_LENGTH] = uchCRCHi;
modbus.message[MESSAGE_LENGTH + 1] = uchCRCLo;
}
/*! @brief Fills modbus.message with a message to set the valves. */
void createMessage(uint16 const valves)
{
modbus.message[0] = MODBUS_ADDRESS;
modbus.message[1] = 0x10;
modbus.message[2] = 0x00;
modbus.message[3] = 0x00;
modbus.message[4] = 0x00;
modbus.message[5] = 0x01;
modbus.message[6] = 0x02;
modbus.message[7] = valves & 0xff;
modbus.message[8] = valves >> 8;
}
/*!
* @brief Sends a message over modbus to set the state of the valves.
*
* @param valves State to set the valves to. Each bit represents one valve where a high bit activates the valve.
*/
void modbus_sendMessage(uint16 const valves)
{
/* Fills the message buffer. */
createMessage(valves);
calculateCRC();
#ifdef DEBUG
printf("Sent data: %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x.\n", modbus.message[0], modbus.message[1], modbus.message[2], modbus.message[3], modbus.message[4], modbus.message[5], modbus.message[6], modbus.message[7], modbus.message[8], modbus.message[9], modbus.message[10]);
#endif
/* Writes the message buffer to the serial device. */
write(modbus.fd, modbus.message, MESSAGE_LENGTH + 2);
}
/*! @brief Initializes the modbus subsystem. */
void modbus_init()
{
struct termios newtio;
/* Open the serial device. */
modbus.fd = open(CONSOLE_DEVICE, O_WRONLY | O_DSYNC | O_NOCTTY);
if (modbus.fd < 0)
{
perror(CONSOLE_DEVICE);
return;
}
printf("Serial console initialized.\n");
/* Set the parameters of the serial device to the ones needed for modbus. */
bzero(&newtio, sizeof newtio);
newtio.c_cflag = BAUDRATE | CS8 | CLOCAL | CREAD | PARENB;
newtio.c_iflag = IGNPAR | IGNBRK;
newtio.c_oflag = 0;
newtio.c_lflag = 0;
tcflush(modbus.fd, TCIFLUSH);
tcsetattr(modbus.fd, TCSANOW, &newtio);
}