diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_DAC_1M.csv b/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_DAC_1M.csv
new file mode 100755
index 000000000000..b9f4e750a8df
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_DAC_1M.csv
@@ -0,0 +1,342 @@
+VERSION,CABLE TYPE,VENDOR,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+1.2,DAC_1M,GENERIC,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,SPEED,ENCODING,,,,,,,,,SPEED,ENCODING,,,,,,,,,,,,,SPEED,ENCODING,,,,,,,SPEED,ENCODING,,,,,,,SPEED,ENCODING,,,,,,,,,,
+,,,50G/400G,PAM4,,,,,,,,,25G/100G,NRZ,,,,,,,,,,,,,10G/40G,NRZ,,,,,,,LT 50G/400G ,PAM4,,,,,,,ANLT 25G/100G ,NRZ,,,,,,,,,,
+index,Front Port,lane,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,RX_EQ_COARSE_TUNE_EFFORT_50G,RX_EQ_FINE_TUNE_EFFORT_50G,RX_GAINSHAPE1,RX_GAINSHAPE2,LINK_TRAINING,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,RX_GAINSHAPE1,RX_GAINSHAPE2,RX_AGC_TARGET,RX_EYE_DISQUALIFY_THRESHOLD_25G,RX_EQ_COARSE_TUNE_EFFORT_25G,RX_EQ_FINE_TUNE_EFFORT_25G,SD_RESET_THRESHOLD,SD_RESET_25G,LINK_TRAINING,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,RX_GAINSHAPE1,RX_GAINSHAPE2,LINK_TRAINING,RX_GAINSHAPE1,RX_GAINSHAPE2,RX_EQ_COARSE_TUNE_EFFORT_50G,RX_EQ_FINE_TUNE_EFFORT_50G,RX_CTLE_LF,RX_CTLE_HF,RX_CTLE_BW,LINK_TRAINING,RX_GAINSHAPE1,RX_GAINSHAPE2,RX_AGC_TARGET,RX_EYE_DISQUALIFY_THRESHOLD_25G,RX_EQ_COARSE_TUNE_EFFORT_25G,RX_EQ_FINE_TUNE_EFFORT_25G,SD_RESET_25G,SD_RESET_THRESHOLD_25G,LINK_TRAINING,AN,AN_ABILITY,FEC
+0,0,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+1,0,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+2,0,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+3,0,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+4,0,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+5,0,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+6,0,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+7,0,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+8,1,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+9,1,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+10,1,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+11,1,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+12,1,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+13,1,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+14,1,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+15,1,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+16,2,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+17,2,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+18,2,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+19,2,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+20,2,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+21,2,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+22,2,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+23,2,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+24,3,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+25,3,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+26,3,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+27,3,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+28,3,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+29,3,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+30,3,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+31,3,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+32,4,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+33,4,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+34,4,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+35,4,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+36,4,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+37,4,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+38,4,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+39,4,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+40,5,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+41,5,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+42,5,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+43,5,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+44,5,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+45,5,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+46,5,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+47,5,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+48,6,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+49,6,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+50,6,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+51,6,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+52,6,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+53,6,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+54,6,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+55,6,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+56,7,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+57,7,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+58,7,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+59,7,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+60,7,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+61,7,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+62,7,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+63,7,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+64,8,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+65,8,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+66,8,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+67,8,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+68,8,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+69,8,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+70,8,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+71,8,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+72,9,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+73,9,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+74,9,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+75,9,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+76,9,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+77,9,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+78,9,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+79,9,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+80,10,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+81,10,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+82,10,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+83,10,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+84,10,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+85,10,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+86,10,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+87,10,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+88,11,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+89,11,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+90,11,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+91,11,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+92,11,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+93,11,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+94,11,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+95,11,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+96,12,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+97,12,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+98,12,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+99,12,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+100,12,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+101,12,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+102,12,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+103,12,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+104,13,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+105,13,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+106,13,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+107,13,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+108,13,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+109,13,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+110,13,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+111,13,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+112,14,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+113,14,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+114,14,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+115,14,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+116,14,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+117,14,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+118,14,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+119,14,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+120,15,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+121,15,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+122,15,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+123,15,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+124,15,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+125,15,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+126,15,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+127,15,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+128,16,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+129,16,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+130,16,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+131,16,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+132,16,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+133,16,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+134,16,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+135,16,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+136,17,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+137,17,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+138,17,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+139,17,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+140,17,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+141,17,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+142,17,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+143,17,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+144,18,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+145,18,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+146,18,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+147,18,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+148,18,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+149,18,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+150,18,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+151,18,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+152,19,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+153,19,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+154,19,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+155,19,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+156,19,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+157,19,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+158,19,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+159,19,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+160,20,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+161,20,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+162,20,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+163,20,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+164,20,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+165,20,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+166,20,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+167,20,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+168,21,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+169,21,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+170,21,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+171,21,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+172,21,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+173,21,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+174,21,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+175,21,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+176,22,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+177,22,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+178,22,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+179,22,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+180,22,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+181,22,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+182,22,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+183,22,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+184,23,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+185,23,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+186,23,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+187,23,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+188,23,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+189,23,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+190,23,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+191,23,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+192,24,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+193,24,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+194,24,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+195,24,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+196,24,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+197,24,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+198,24,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+199,24,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+200,25,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+201,25,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+202,25,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+203,25,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+204,25,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+205,25,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+206,25,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+207,25,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+208,26,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+209,26,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+210,26,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+211,26,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+212,26,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+213,26,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+214,26,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+215,26,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+216,27,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+217,27,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+218,27,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+219,27,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+220,27,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+221,27,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+222,27,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+223,27,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+224,28,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+225,28,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+226,28,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+227,28,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+228,28,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+229,28,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+230,28,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+231,28,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+232,29,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+233,29,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+234,29,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+235,29,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+236,29,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+237,29,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+238,29,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+239,29,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+240,30,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+241,30,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+242,30,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+243,30,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+244,30,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+245,30,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+246,30,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+247,30,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+248,31,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+249,31,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+250,31,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+251,31,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+252,31,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+253,31,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+254,31,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+255,31,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,0,1,130,100,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_DAC_3M.csv b/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_DAC_3M.csv
new file mode 100755
index 000000000000..b6bbd017e483
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_DAC_3M.csv
@@ -0,0 +1,342 @@
+VERSION,CABLE TYPE,VENDOR,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+1.2,DAC_3M,GENERIC,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,SPEED,ENCODING,,,,,,,,,SPEED,ENCODING,,,,,,,,,,,,,SPEED,ENCODING,,,,,,,SPEED,ENCODING,,,,,,,SPEED,ENCODING,,,,,,,,,,
+,,,50G/400G,PAM4,,,,,,,,,25G/100G,NRZ,,,,,,,,,,,,,10G/40G,NRZ,,,,,,,LT 50G/400G,PAM4,,,,,,,ANLT 25G/100G,NRZ,,,,,,,,,,
+index,Front Port,lane,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,RX_EQ_COARSE_TUNE_EFFORT_50G,RX_EQ_FINE_TUNE_EFFORT_50G,RX_GAINSHAPE1,RX_GAINSHAPE2,LINK_TRAINING,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,RX_GAINSHAPE1,RX_GAINSHAPE2,RX_AGC_TARGET,RX_EYE_DISQUALIFY_THRESHOLD_25G,RX_EQ_COARSE_TUNE_EFFORT_25G,RX_EQ_FINE_TUNE_EFFORT_25G,SD_RESET_THRESHOLD,SD_RESET_25G,LINK_TRAINING,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,RX_GAINSHAPE1,RX_GAINSHAPE2,LINK_TRAINING,RX_GAINSHAPE1,RX_GAINSHAPE2,RX_EQ_COARSE_TUNE_EFFORT_50G,RX_EQ_FINE_TUNE_EFFORT_50G,RX_CTLE_LF,RX_CTLE_HF,RX_CTLE_BW,LINK_TRAINING,RX_GAINSHAPE1,RX_GAINSHAPE2,RX_AGC_TARGET,RX_EYE_DISQUALIFY_THRESHOLD_25G,RX_EQ_COARSE_TUNE_EFFORT_25G,RX_EQ_FINE_TUNE_EFFORT_25G,SD_RESET_25G,SD_RESET_THRESHOLD_25G,LINK_TRAINING,AN,AN_ABILITY,FEC
+0,0,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+1,0,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+2,0,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+3,0,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+4,0,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+5,0,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+6,0,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+7,0,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+8,1,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+9,1,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+10,1,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+11,1,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+12,1,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+13,1,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+14,1,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+15,1,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+16,2,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+17,2,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+18,2,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+19,2,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+20,2,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+21,2,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+22,2,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+23,2,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+24,3,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+25,3,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+26,3,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+27,3,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+28,3,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+29,3,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+30,3,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+31,3,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+32,4,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+33,4,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+34,4,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+35,4,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+36,4,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+37,4,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+38,4,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+39,4,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+40,5,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+41,5,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+42,5,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+43,5,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+44,5,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+45,5,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+46,5,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+47,5,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+48,6,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+49,6,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+50,6,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+51,6,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+52,6,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+53,6,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+54,6,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+55,6,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+56,7,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+57,7,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+58,7,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+59,7,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+60,7,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+61,7,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+62,7,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+63,7,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+64,8,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+65,8,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+66,8,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+67,8,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+68,8,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+69,8,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+70,8,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+71,8,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+72,9,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+73,9,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+74,9,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+75,9,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+76,9,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+77,9,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+78,9,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+79,9,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+80,10,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+81,10,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+82,10,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+83,10,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+84,10,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+85,10,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+86,10,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+87,10,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+88,11,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+89,11,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+90,11,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+91,11,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+92,11,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+93,11,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+94,11,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+95,11,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+96,12,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+97,12,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+98,12,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+99,12,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+100,12,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+101,12,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+102,12,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+103,12,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+104,13,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+105,13,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+106,13,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+107,13,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+108,13,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+109,13,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+110,13,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+111,13,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+112,14,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+113,14,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+114,14,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+115,14,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+116,14,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+117,14,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+118,14,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+119,14,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+120,15,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+121,15,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+122,15,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+123,15,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+124,15,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+125,15,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+126,15,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+127,15,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+128,16,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+129,16,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+130,16,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+131,16,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+132,16,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+133,16,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+134,16,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+135,16,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+136,17,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+137,17,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+138,17,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+139,17,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+140,17,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+141,17,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+142,17,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+143,17,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+144,18,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+145,18,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+146,18,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+147,18,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+148,18,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+149,18,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+150,18,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+151,18,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+152,19,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+153,19,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+154,19,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+155,19,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+156,19,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+157,19,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+158,19,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+159,19,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+160,20,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+161,20,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+162,20,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+163,20,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+164,20,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+165,20,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+166,20,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+167,20,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+168,21,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+169,21,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+170,21,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+171,21,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+172,21,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+173,21,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+174,21,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+175,21,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+176,22,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+177,22,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+178,22,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+179,22,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+180,22,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+181,22,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+182,22,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+183,22,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+184,23,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+185,23,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+186,23,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+187,23,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+188,23,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+189,23,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+190,23,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+191,23,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+192,24,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+193,24,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+194,24,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+195,24,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+196,24,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+197,24,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+198,24,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+199,24,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+200,25,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+201,25,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+202,25,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+203,25,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+204,25,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+205,25,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+206,25,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+207,25,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+208,26,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+209,26,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+210,26,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+211,26,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+212,26,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+213,26,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+214,26,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+215,26,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+216,27,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+217,27,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+218,27,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+219,27,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+220,27,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+221,27,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+222,27,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+223,27,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+224,28,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+225,28,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+226,28,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+227,28,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+228,28,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+229,28,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+230,28,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+231,28,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+232,29,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+233,29,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+234,29,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+235,29,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+236,29,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+237,29,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+238,29,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+239,29,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+240,30,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+241,30,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+242,30,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+243,30,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+244,30,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+245,30,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+246,30,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+247,30,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+248,31,0,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+249,31,1,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+250,31,2,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+251,31,3,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+252,31,4,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+253,31,5,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+254,31,6,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+255,31,7,0,0,0,0,0,Medium,HIGH,0,2,0,0,0,0,0,0,2,2,130,150,Low,Low,5,TRUE,0,3,2,-2,0,4,0,1,0,0,2,Medium,High,0,10,10,1,0,1,130,100,Low,Low,0,NA,1,1,100GBASE-KR4,NONE
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_Optics.csv b/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_Optics.csv
new file mode 100755
index 000000000000..a652f33e78b9
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/CSV/TL7_Optics.csv
@@ -0,0 +1,261 @@
+VERSION,CABLE TYPE,VENDOR,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+1.2,OPTICS,GENERIC,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
+,,,SPEED,ENCODING,,,,,,,,,,SPEED,ENCODING,,,,,,,,,,,,,,SPEED,ENCODING,,,,,,
+,,,50G/400G,PAM4,,,,,,,,,,25G/100G,NRZ,,,,,,,,,,,,,,10G/40G,NRZ,,,,,,
+index,Front Port,lane,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,Optical Module CTLE,RX_EQ_COARSE_TUNE_EFFORT_50G,RX_EQ_FINE_TUNE_EFFORT_50G,RX_GAINSHAPE1,RX_GAINSHAPE2,LINK_TRAINING,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,Optical Module CTLE,RX_GAINSHAPE1,RX_GAINSHAPE2,RX_AGC_TARGET,RX_EYE_DISQUALIFY_THRESHOLD_25G,RX_EQ_COARSE_TUNE_EFFORT_25G,RX_EQ_FINE_TUNE_EFFORT_25G,SD_RESET_THRESHOLD,SD_RESET_25G,LINK_TRAINING,TX_EQ_ATTN,TX_EQ_PRE1,TX_EQ_PRE2,TX_EQ_PRE3,TX_EQ_POST,RX_GAINSHAPE1,RX_GAINSHAPE2,LINK_TRAINING
+0,0,0,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,High,High,NA,FALSE,0,0,0,0,0,0,0,0,0
+1,0,1,0,4,0,0,8,5,Medium,High,0,2,0,0,2,0,0,8,4,0,0,100,100,High,High,NA,FALSE,0,0,0,0,0,0,0,0,0
+2,0,2,0,4,0,0,8,3.5,Medium,High,0,2,0,0,2,0,0,4,5,0,0,100,100,High,High,NA,FALSE,0,0,0,0,0,0,0,0,0
+3,0,3,0,4,0,0,6,6.5,Medium,High,0,2,0,0,6,0,0,6,4,0,0,100,100,High,High,NA,FALSE,0,0,0,0,0,0,0,0,0
+4,0,4,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,High,High,NA,FALSE,0,0,0,0,0,0,0,0,0
+5,0,5,0,2,0,0,10,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,High,High,NA,FALSE,0,0,0,0,0,0,0,0,0
+6,0,6,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,High,High,NA,FALSE,0,0,0,0,0,0,0,0,0
+7,0,7,0,4,0,0,6,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,High,High,NA,FALSE,0,0,0,0,0,0,0,0,0
+8,1,0,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+9,1,1,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+10,1,2,0,4,0,0,6,4.5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+11,1,3,0,4,0,0,8,3.5,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+12,1,4,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+13,1,5,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+14,1,6,0,4,0,0,4,6.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+15,1,7,0,4,0,0,4,6.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+16,2,0,0,2,0,0,6,5,Medium,High,0,2,0,0,2,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+17,2,1,0,4,0,0,6,4,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+18,2,2,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,5,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+19,2,3,0,4,0,0,6,5.5,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+20,2,4,0,6,0,0,6,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+21,2,5,0,4,0,0,6,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+22,2,6,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+23,2,7,0,6,0,0,6,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+24,3,0,0,4,0,0,6,4,Medium,High,0,2,0,0,4,0,0,6,2,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+25,3,1,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+26,3,2,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+27,3,3,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+28,3,4,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+29,3,5,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+30,3,6,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+31,3,7,0,4,0,0,6,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+32,4,0,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+33,4,1,0,4,0,0,6,5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+34,4,2,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+35,4,3,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+36,4,4,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+37,4,5,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+38,4,6,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+39,4,7,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+40,5,0,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+41,5,1,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+42,5,2,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+43,5,3,0,4,0,0,6,4,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+44,5,4,0,4,0,0,6,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+45,5,5,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+46,5,6,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+47,5,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+48,6,0,0,4,0,0,4,4,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+49,6,1,0,6,0,0,6,4,Medium,High,0,2,0,0,6,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+50,6,2,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+51,6,3,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+52,6,4,0,6,0,0,6,3.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+53,6,5,0,6,0,0,6,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+54,6,6,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+55,6,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+56,7,0,0,4,0,0,4,4,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+57,7,1,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+58,7,2,0,4,0,0,4,4,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+59,7,3,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+60,7,4,0,4,0,0,4,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+61,7,5,0,4,0,0,4,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+62,7,6,0,4,0,0,4,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+63,7,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+64,8,0,0,4,0,0,6,5,Medium,High,0,2,0,0,6,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+65,8,1,0,4,0,0,6,6.5,Medium,High,0,2,0,0,4,0,0,8,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+66,8,2,0,4,0,0,6,5.5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+67,8,3,0,4,0,0,10,4,Medium,High,0,2,0,0,4,0,0,10,2,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+68,8,4,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+69,8,5,0,4,0,0,10,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+70,8,6,0,4,0,0,6,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+71,8,7,0,4,0,0,8,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+72,9,0,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+73,9,1,0,4,0,0,4,7,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+74,9,2,0,4,0,0,8,4.5,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+75,9,3,0,4,0,0,8,5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+76,9,4,0,4,0,0,6,6.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+77,9,5,0,4,0,0,4,7,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+78,9,6,0,4,0,0,8,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+79,9,7,0,4,0,0,6,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+80,10,0,0,4,0,0,6,5,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+81,10,1,0,4,0,0,8,5,Medium,High,0,2,0,0,4,0,0,6,5,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+82,10,2,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+83,10,3,0,4,0,0,6,6,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+84,10,4,0,4,0,0,4,7,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+85,10,5,0,4,0,0,8,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+86,10,6,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+87,10,7,0,4,0,0,6,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+88,11,0,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+89,11,1,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+90,11,2,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+91,11,3,0,6,0,0,6,4.5,Medium,High,0,2,0,0,6,0,0,8,2,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+92,11,4,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+93,11,5,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+94,11,6,0,4,0,0,4,7.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+95,11,7,0,4,0,0,6,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+96,12,0,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+97,12,1,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+98,12,2,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+99,12,3,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,8,2,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+100,12,4,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+101,12,5,0,4,0,0,6,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+102,12,6,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+103,12,7,0,4,0,0,6,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+104,13,0,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+105,13,1,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+106,13,2,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+107,13,3,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+108,13,4,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+109,13,5,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+110,13,6,0,4,0,0,6,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+111,13,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+112,14,0,0,4,0,0,4,4,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+113,14,1,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+114,14,2,0,4,0,0,4,4,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+115,14,3,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+116,14,4,0,4,0,0,4,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+117,14,5,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+118,14,6,0,4,0,0,4,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+119,14,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+120,15,0,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+121,15,1,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+122,15,2,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+123,15,3,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+124,15,4,0,4,0,0,4,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+125,15,5,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+126,15,6,0,4,0,0,4,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+127,15,7,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+128,16,0,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+129,16,1,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+130,16,2,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+131,16,3,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+132,16,4,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+133,16,5,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+134,16,6,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+135,16,7,0,4,0,0,6,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+136,17,0,0,4,0,0,4,4,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+137,17,1,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+138,17,2,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+139,17,3,0,6,0,0,6,3.5,Medium,High,0,2,0,0,6,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+140,17,4,0,4,0,0,4,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+141,17,5,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+142,17,6,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+143,17,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+144,18,0,0,4,0,0,6,4,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+145,18,1,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+146,18,2,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+147,18,3,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+148,18,4,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+149,18,5,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+150,18,6,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+151,18,7,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+152,19,0,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+153,19,1,0,6,0,0,6,4,Medium,High,0,2,0,0,6,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+154,19,2,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+155,19,3,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+156,19,4,0,4,0,0,6,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+157,19,5,0,4,0,0,4,6.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+158,19,6,0,4,0,0,4,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+159,19,7,0,6,0,0,6,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+160,20,0,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+161,20,1,0,4,0,0,6,5.5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+162,20,2,0,4,0,0,6,5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+163,20,3,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+164,20,4,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+165,20,5,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+166,20,6,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+167,20,7,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+168,21,0,0,4,0,0,6,4,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+169,21,1,0,4,0,0,6,5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+170,21,2,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+171,21,3,0,6,0,0,6,4,Medium,High,0,2,0,0,6,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+172,21,4,0,4,0,0,4,6.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+173,21,5,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+174,21,6,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+175,21,7,0,4,0,0,4,6.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+176,22,0,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+177,22,1,0,4,0,0,8,4.5,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+178,22,2,0,4,0,0,8,4,Medium,High,0,2,0,0,4,0,0,8,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+179,22,3,0,4,0,0,10,3,Medium,High,0,2,0,0,4,0,0,10,2,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+180,22,4,0,4,0,0,10,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+181,22,5,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+182,22,6,0,4,0,0,8,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+183,22,7,0,4,0,0,8,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+184,23,0,0,6,0,0,6,4,Medium,High,0,2,0,0,6,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+185,23,1,0,4,0,0,4,7,Medium,High,0,2,0,0,4,0,0,8,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+186,23,2,0,4,0,0,6,4.5,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+187,23,3,0,4,0,0,6,5.5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+188,23,4,0,4,0,0,6,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+189,23,5,0,4,0,0,8,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+190,23,6,0,4,0,0,8,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+191,23,7,0,4,0,0,8,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+192,24,0,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+193,24,1,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+194,24,2,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+195,24,3,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+196,24,4,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+197,24,5,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+198,24,6,0,4,0,0,6,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+199,24,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+200,25,0,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+201,25,1,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+202,25,2,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+203,25,3,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+204,25,4,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+205,25,5,0,4,0,0,6,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+206,25,6,0,4,0,0,4,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+207,25,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+208,26,0,0,4,0,0,6,3.5,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+209,26,1,0,4,0,0,6,4.5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+210,26,2,0,4,0,0,4,5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+211,26,3,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+212,26,4,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+213,26,5,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+214,26,6,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+215,26,7,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+216,27,0,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+217,27,1,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+218,27,2,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+219,27,3,0,6,0,0,6,4.5,Medium,High,0,2,0,0,6,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+220,27,4,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+221,27,5,0,4,0,0,6,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+222,27,6,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+223,27,7,0,6,0,0,6,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+224,28,0,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+225,28,1,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+226,28,2,0,4,0,0,4,4.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+227,28,3,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+228,28,4,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+229,28,5,0,4,0,0,6,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+230,28,6,0,4,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+231,28,7,0,4,0,0,6,4.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+232,29,0,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+233,29,1,0,6,0,0,6,4,Medium,High,0,2,0,0,6,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+234,29,2,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+235,29,3,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+236,29,4,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+237,29,5,0,4,0,0,6,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+238,29,6,0,4,0,0,4,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+239,29,7,0,6,0,0,4,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+240,30,0,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+241,30,1,0,4,0,0,6,6,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+242,30,2,0,4,0,0,6,4,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+243,30,3,0,4,0,0,4,6,Medium,High,0,2,0,0,4,0,0,6,3,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+244,30,4,0,4,0,0,6,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+245,30,5,0,4,0,0,6,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+246,30,6,0,4,0,0,8,4,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+247,30,7,0,4,0,0,4,6.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+248,31,0,0,6,-1,0,4,4.5,Medium,High,0,2,0,0,6,0,0,6,2,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+249,31,1,0,4,0,0,6,5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+250,31,2,0,4,0,0,4,5.5,Medium,High,0,2,0,0,4,0,0,4,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+251,31,3,0,4,0,0,4,6.5,Medium,High,0,2,0,0,4,0,0,6,4,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+252,31,4,0,4,0,0,6,6,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+253,31,5,0,4,0,0,6,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+254,31,6,0,4,0,0,6,5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
+255,31,7,0,4,0,0,6,5.5,Medium,High,0,2,0,0,0,0,0,0,0,0,0,100,100,LOW,LOW,NA,FALSE,0,0,0,0,0,0,0,0,0
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/installer.conf b/device/wistron/x86_64-wistron_6512_32r-r0/installer.conf
index d5f9419d77ff..0bd1a8bae86f 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/installer.conf
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/installer.conf
@@ -1,4 +1,4 @@
 CONSOLE_PORT=0x3f8
 CONSOLE_DEV=0
 CONSOLE_SPEED=115200
-ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="pcie_aspm=off"
+ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="pcie_aspm=off intel_iommu=off"
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/pcie.yaml b/device/wistron/x86_64-wistron_6512_32r-r0/pcie.yaml
new file mode 100755
index 000000000000..227f7cb249bf
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/pcie.yaml
@@ -0,0 +1,495 @@
+- bus: '00'
+  dev: '00'
+  fn: '0'
+  id: 6f00
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 (rev 05)'
+- bus: '00'
+  dev: '01'
+  fn: '0'
+  id: 6f02
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 05)'
+- bus: '00'
+  dev: '01'
+  fn: '1'
+  id: 6f03
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 05)'
+- bus: '00'
+  dev: '02'
+  fn: '0'
+  id: 6f04
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 (rev 05)'
+- bus: '00'
+  dev: '02'
+  fn: '2'
+  id: 6f06
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 (rev 05)'
+- bus: '00'
+  dev: '02'
+  fn: '3'
+  id: 6f07
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 (rev 05)'
+- bus: '00'
+  dev: '03'
+  fn: '0'
+  id: 6f08
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 05)'
+- bus: '00'
+  dev: '03'
+  fn: '1'
+  id: 6f09
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 05)'
+- bus: '00'
+  dev: '03'
+  fn: '2'
+  id: 6f0a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 05)'
+- bus: '00'
+  dev: '03'
+  fn: '3'
+  id: 6f0b
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 05)'
+- bus: '00'
+  dev: '04'
+  fn: '0'
+  id: 6f20
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 0 (rev 05)'
+- bus: '00'
+  dev: '04'
+  fn: '1'
+  id: 6f21
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 1 (rev 05)'
+- bus: '00'
+  dev: '04'
+  fn: '2'
+  id: 6f22
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 2 (rev 05)'
+- bus: '00'
+  dev: '04'
+  fn: '3'
+  id: 6f23
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 3 (rev 05)'
+- bus: '00'
+  dev: '04'
+  fn: '4'
+  id: 6f24
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 4 (rev 05)'
+- bus: '00'
+  dev: '04'
+  fn: '5'
+  id: 6f25
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 5 (rev 05)'
+- bus: '00'
+  dev: '04'
+  fn: '6'
+  id: 6f26
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 6 (rev 05)'
+- bus: '00'
+  dev: '04'
+  fn: '7'
+  id: 6f27
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Crystal Beach DMA Channel 7 (rev 05)'
+- bus: '00'
+  dev: '05'
+  fn: '0'
+  id: 6f28
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management (rev 05)'
+- bus: '00'
+  dev: '05'
+  fn: '1'
+  id: 6f29
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug (rev 05)'
+- bus: '00'
+  dev: '05'
+  fn: '2'
+  id: 6f2a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors (rev 05)'
+- bus: '00'
+  dev: '05'
+  fn: '4'
+  id: 6f2c
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC (rev 05)'
+- bus: '00'
+  dev: '05'
+  fn: '6'
+  id: 6f39
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IO Performance Monitoring (rev 05)'
+- bus: '00'
+  dev: '06'
+  fn: '0'
+  id: 6f10
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '06'
+  fn: '1'
+  id: 6f11
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '06'
+  fn: '2'
+  id: 6f12
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '06'
+  fn: '3'
+  id: 6f13
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '06'
+  fn: '4'
+  id: 6f14
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '06'
+  fn: '5'
+  id: 6f15
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '06'
+  fn: '6'
+  id: 6f16
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '06'
+  fn: '7'
+  id: 6f17
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '07'
+  fn: '0'
+  id: 6f18
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '07'
+  fn: '1'
+  id: 6f19
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '07'
+  fn: '2'
+  id: 6f1a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '07'
+  fn: '3'
+  id: 6f1b
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '07'
+  fn: '4'
+  id: 6f1c
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Debug (rev 05)'
+- bus: '00'
+  dev: '14'
+  fn: '0'
+  id: 8c31
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)'
+- bus: '00'
+  dev: '16'
+  fn: '0'
+  id: 8c3a
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)'
+- bus: '00'
+  dev: '16'
+  fn: '1'
+  id: 8c3b
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #2 (rev 04)'
+- bus: '00'
+  dev: '1c'
+  fn: '0'
+  id: 8c10
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)'
+- bus: '00'
+  dev: '1c'
+  fn: '7'
+  id: 8c1e
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d5)'
+- bus: '00'
+  dev: '1d'
+  fn: '0'
+  id: 8c26
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)'
+- bus: '00'
+  dev: '1f'
+  fn: '0'
+  id: 8c54
+  name: 'Intel Corporation C224 Series Chipset Family Server Standard SKU LPC Controller (rev 05)'
+- bus: '00'
+  dev: '1f'
+  fn: '2'
+  id: 8c02
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)'
+- bus: '00'
+  dev: '1f'
+  fn: '3'
+  id: 8c22
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)'
+- bus: '02'
+  dev: '00'
+  fn: '0'
+  id: 1b58
+  name: 'Device 1d98:1b58 (rev 10)'
+- bus: '04'
+  dev: '00'
+  fn: '0'
+  id: 15a7
+  name: 'Intel Corporation Device 15a7'
+- bus: '04'
+  dev: '00'
+  fn: '1'
+  id: 15a7
+  name: 'Intel Corporation Device 15a7'
+- bus: '05'
+  dev: '00'
+  fn: '0'
+  id: 15a7
+  name: 'Intel Corporation Device 15a7'
+- bus: '05'
+  dev: '00'
+  fn: '1'
+  id: 15a7
+  name: 'Intel Corporation Device 15a7'
+- bus: '0b'
+  dev: '00'
+  fn: '0'
+  id: 1533
+  name: 'Intel Corporation I210 Gigabit Network Connection (rev 03)'
+- bus: 'ff'
+  dev: '0b'
+  fn: '0'
+  id: 6f81
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 05)'
+- bus: 'ff'
+  dev: '0b'
+  fn: '1'
+  id: 6f36
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 05)'
+- bus: 'ff'
+  dev: '0b'
+  fn: '2'
+  id: 6f37
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 05)'
+- bus: 'ff'
+  dev: '0b'
+  fn: '3'
+  id: 6f76
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link Debug (rev 05)'
+- bus: 'ff'
+  dev: '0c'
+  fn: '0'
+  id: 6fe0
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 05)'
+- bus: 'ff'
+  dev: '0c'
+  fn: '1'
+  id: 6fe1
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 05)'
+- bus: 'ff'
+  dev: '0c'
+  fn: '2'
+  id: 6fe2
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 05)'
+- bus: 'ff'
+  dev: '0c'
+  fn: '3'
+  id: 6fe3
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 05)'
+- bus: 'ff'
+  dev: '0f'
+  fn: '0'
+  id: 6ff8
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 05)'
+- bus: 'ff'
+  dev: '0f'
+  fn: '4'
+  id: 6ffc
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 05)'
+- bus: 'ff'
+  dev: '0f'
+  fn: '5'
+  id: 6ffd
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 05)'
+- bus: 'ff'
+  dev: '0f'
+  fn: '6'
+  id: 6ffe
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 05)'
+- bus: 'ff'
+  dev: '10'
+  fn: '0'
+  id: 6f1d
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent (rev 05)'
+- bus: 'ff'
+  dev: '10'
+  fn: '1'
+  id: 6f34
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent (rev 05)'
+- bus: 'ff'
+  dev: '10'
+  fn: '5'
+  id: 6f1e
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 05)'
+- bus: 'ff'
+  dev: '10'
+  fn: '6'
+  id: 6f7d
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 05)'
+- bus: 'ff'
+  dev: '10'
+  fn: '7'
+  id: 6f1f
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 05)'
+- bus: 'ff'
+  dev: '12'
+  fn: '0'
+  id: 6fa0
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 (rev 05)'
+- bus: 'ff'
+  dev: '12'
+  fn: '1'
+  id: 6f30
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 (rev 05)'
+- bus: 'ff'
+  dev: '12'
+  fn: '2'
+  id: 6f70
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 Debug (rev 05)'
+- bus: 'ff'
+  dev: '13'
+  fn: '0'
+  id: 6fa8
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS (rev 05)'
+- bus: 'ff'
+  dev: '13'
+  fn: '1'
+  id: 6f71
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS (rev 05)'
+- bus: 'ff'
+  dev: '13'
+  fn: '2'
+  id: 6faa
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 05)'
+- bus: 'ff'
+  dev: '13'
+  fn: '3'
+  id: 6fab
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 05)'
+- bus: 'ff'
+  dev: '13'
+  fn: '4'
+  id: 6fac
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 05)'
+- bus: 'ff'
+  dev: '13'
+  fn: '5'
+  id: 6fad
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 05)'
+- bus: 'ff'
+  dev: '13'
+  fn: '6'
+  id: 6fae
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Broadcast (rev 05)'
+- bus: 'ff'
+  dev: '13'
+  fn: '7'
+  id: 6faf
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast (rev 05)'
+- bus: 'ff'
+  dev: '14'
+  fn: '0'
+  id: 6fb0
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control (rev 05)'
+- bus: 'ff'
+  dev: '14'
+  fn: '1'
+  id: 6fb1
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control (rev 05)'
+- bus: 'ff'
+  dev: '14'
+  fn: '2'
+  id: 6fb2
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error (rev 05)'
+- bus: 'ff'
+  dev: '14'
+  fn: '3'
+  id: 6fb3
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error (rev 05)'
+- bus: 'ff'
+  dev: '14'
+  fn: '4'
+  id: 6fbc
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 05)'
+- bus: 'ff'
+  dev: '14'
+  fn: '5'
+  id: 6fbd
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 05)'
+- bus: 'ff'
+  dev: '14'
+  fn: '6'
+  id: 6fbe
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 05)'
+- bus: 'ff'
+  dev: '14'
+  fn: '7'
+  id: 6fbf
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 05)'
+- bus: 'ff'
+  dev: '15'
+  fn: '0'
+  id: 6fb4
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control (rev 05)'
+- bus: 'ff'
+  dev: '15'
+  fn: '1'
+  id: 6fb5
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control (rev 05)'
+- bus: 'ff'
+  dev: '15'
+  fn: '2'
+  id: 6fb6
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error (rev 05)'
+- bus: 'ff'
+  dev: '15'
+  fn: '3'
+  id: 6fb7
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error (rev 05)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '0'
+  id: 6f98
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 05)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '1'
+  id: 6f99
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 05)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '2'
+  id: 6f9a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 05)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '3'
+  id: 6fc0
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 05)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '4'
+  id: 6f9c
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 05)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '7'
+  id: 6f9f
+  name: 'Intel Corporation Device 6f9f (rev 05)'
+- bus: 'ff'
+  dev: '1f'
+  fn: '0'
+  id: 6f88
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 05)'
+- bus: 'ff'
+  dev: '1f'
+  fn: '2'
+  id: 6f8a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 05)'
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/platform.json b/device/wistron/x86_64-wistron_6512_32r-r0/platform.json
new file mode 100644
index 000000000000..f978e6190513
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/platform.json
@@ -0,0 +1,848 @@
+{
+    "chassis": {
+        "name": "wistron_6512_32r",
+        "components": [
+            {
+                "name": "BIOS"
+            },
+            {
+                "name": "CPLD1"
+            },
+            {
+                "name": "CPLD2"
+            },
+            {
+                "name": "MB_FPGA"
+            },
+            {
+                "name": "CPU_FPGA"
+            },
+            {
+                "name": "BMC"
+            }
+        ],
+        "fans": [
+            {
+                "name": "FAN-1F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-1R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-2F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-2R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-3F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-3R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-4F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-4R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-5F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-5R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-6F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-6R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-7F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-7R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            }
+		],
+        "fan_drawers": [
+            {
+                "name": "FanTray1",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-1F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-1R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray2",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-2F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-2R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray3",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-3F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-3R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray4",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-4F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-4R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray5",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-5F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-5R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray6",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-6F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-6R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray7",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-7F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-7R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            }
+        ],
+        "psus": [
+            {
+                "name": "PSU-1",
+                "fans": [
+                    {
+                        "name": "PSU-1 FAN-1",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ],
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "PSU-2",
+                "fans": [
+                    {
+                        "name": "PSU-2 FAN-1",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ],
+                "status_led": {
+                    "controllable": false
+                }
+            }
+        ],
+        "thermals": [
+            {
+                "name": "Switch",
+                "controllable": false
+            },
+            {
+                "name": "UCPUB",
+                "controllable": false
+            },
+            {
+                "name": "UFANB",
+                "controllable": false
+            },
+            {
+                "name": "UFRNT1",
+                "controllable": false
+            },
+            {
+                "name": "UFRNT2",
+                "controllable": false
+            },
+            {
+                "name": "UFRNT3",
+                "controllable": false
+            },
+            {
+                "name": "UFRNT4",
+                "controllable": false
+            },
+            {
+                "name": "UREAR1",
+                "controllable": false
+            }
+        ],
+        "sfps": [
+            {
+                "name": "port1"
+            },
+            {
+                "name": "port2"
+            },
+            {
+                "name": "port3"
+            },
+            {
+                "name": "port4"
+            },
+            {
+                "name": "port5"
+            },
+            {
+                "name": "port6"
+            },
+            {
+                "name": "port7"
+            },
+            {
+                "name": "port8"
+            },
+            {
+                "name": "port9"
+            },
+            {
+                "name": "port10"
+            },
+            {
+                "name": "port11"
+            },
+            {
+                "name": "port12"
+            },
+            {
+                "name": "port13"
+            },
+            {
+                "name": "port14"
+            },
+            {
+                "name": "port15"
+            },
+            {
+                "name": "port16"
+            },
+            {
+                "name": "port17"
+            },
+            {
+                "name": "port18"
+            },
+            {
+                "name": "port19"
+            },
+            {
+                "name": "port20"
+            },
+            {
+                "name": "port21"
+            },
+            {
+                "name": "port22"
+            },
+            {
+                "name": "port23"
+            },
+            {
+                "name": "port24"
+            },
+            {
+                "name": "port25"
+            },
+            {
+                "name": "port26"
+            },
+            {
+                "name": "port27"
+            },
+            {
+                "name": "port28"
+            },
+            {
+                "name": "port29"
+            },
+            {
+                "name": "port30"
+            },
+            {
+                "name": "port31"
+            },
+            {
+                "name": "port32"
+            }
+        ]
+    },
+    "interfaces": {
+        "Ethernet0": {
+            "index": "0,0,0,0,0,0,0,0",
+            "lanes": "89,90,91,92,93,94,95,96",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth1"],
+                "1x100G(4)": ["Eth1"],
+                "4x25G[10G](4)": ["Eth1-1", "Eth1-2", "Eth1-3", "Eth1-4"],
+                "4x10G[25G](4)": ["Eth1-1", "Eth1-2", "Eth1-3", "Eth1-4"]
+            }
+        },
+        "Ethernet8": {
+            "index": "1,1,1,1,1,1,1,1",
+            "lanes": "81,82,83,84,85,86,87,88",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth2"],
+                "1x100G(4)": ["Eth2"],
+                "4x25G[10G](4)": ["Eth2-1", "Eth2-2", "Eth2-3", "Eth2-4"],
+                "4x10G[25G](4)": ["Eth2-1", "Eth2-2", "Eth2-3", "Eth2-4"]
+            }
+        },
+        "Ethernet16": {
+            "index": "2,2,2,2,2,2,2,2",
+            "lanes": "73,74,75,76,77,78,79,80",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth3"],
+                "1x100G(4)": ["Eth3"],
+                "4x25G[10G](4)": ["Eth3-1", "Eth3-2", "Eth3-3", "Eth3-4"],
+                "4x10G[25G](4)": ["Eth3-1", "Eth3-2", "Eth3-3", "Eth3-4"]
+            }
+        },
+        "Ethernet24": {
+            "index": "3,3,3,3,3,3,3,3",
+            "lanes": "65,66,67,68,69,70,71,72",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth4"],
+                "1x100G(4)": ["Eth4"],
+                "4x25G[10G](4)": ["Eth4-1", "Eth4-2", "Eth4-3", "Eth4-4"],
+                "4x10G[25G](4)": ["Eth4-1", "Eth4-2", "Eth4-3", "Eth4-4"]
+            }
+        },
+        "Ethernet32": {
+            "index": "4,4,4,4,4,4,4,4",
+            "lanes": "57,58,59,60,61,62,63,64",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth5"],
+                "1x100G(4)": ["Eth5"],
+                "4x25G[10G](4)": ["Eth5-1", "Eth5-2", "Eth5-3", "Eth5-4"],
+                "4x10G[25G](4)": ["Eth5-1", "Eth5-2", "Eth5-3", "Eth5-4"]
+            }
+        },
+        "Ethernet40": {
+            "index": "5,5,5,5,5,5,5,5",
+            "lanes": "49,50,51,52,53,54,55,56",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth6"],
+                "1x100G(4)": ["Eth6"],
+                "4x25G[10G](4)": ["Eth6-1", "Eth6-2", "Eth6-3", "Eth6-4"],
+                "4x10G[25G](4)": ["Eth6-1", "Eth6-2", "Eth6-3", "Eth6-4"]
+            }
+        },
+        "Ethernet48": {
+            "index": "6,6,6,6,6,6,6,6",
+            "lanes": "41,42,43,44,45,46,47,48",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth7"],
+                "1x100G(4)": ["Eth7"],
+                "4x25G[10G](4)": ["Eth7-1", "Eth7-2", "Eth7-3", "Eth7-4"],
+                "4x10G[25G](4)": ["Eth7-1", "Eth7-2", "Eth7-3", "Eth7-4"]
+            }
+        },
+        "Ethernet56": {
+            "index": "7,7,7,7,7,7,7,7",
+            "lanes": "33,34,35,36,37,38,39,40",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth8"],
+                "1x100G(4)": ["Eth8"],
+                "4x25G[10G](4)": ["Eth8-1", "Eth8-2", "Eth8-3", "Eth8-4"],
+                "4x10G[25G](4)": ["Eth8-1", "Eth8-2", "Eth8-3", "Eth8-4"]
+            }
+        },
+        "Ethernet64": {
+            "index": "8,8,8,8,8,8,8,8",
+            "lanes": "153,154,155,156,157,158,159,160",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth9"],
+                "1x100G(4)": ["Eth9"],
+                "4x25G[10G](4)": ["Eth9-1", "Eth9-2", "Eth9-3", "Eth9-4"],
+                "4x10G[25G](4)": ["Eth9-1", "Eth9-2", "Eth9-3", "Eth9-4"]
+            }
+        },
+        "Ethernet72": {
+            "index": "9,9,9,9,9,9,9,9",
+            "lanes": "145,146,147,148,149,150,151,152",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth10"],
+                "1x100G(4)": ["Eth10"],
+                "4x25G[10G](4)": ["Eth10-1", "Eth10-2", "Eth10-3", "Eth10-4"],
+                "4x10G[25G](4)": ["Eth10-1", "Eth10-2", "Eth10-3", "Eth10-4"]
+            }
+        },
+        "Ethernet80": {
+            "index": "10,10,10,10,10,10,10,10",
+            "lanes": "137,138,139,140,141,142,143,144",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth11"],
+                "1x100G(4)": ["Eth11"],
+                "4x25G[10G](4)": ["Eth11-1", "Eth11-2", "Eth11-3", "Eth11-4"],
+                "4x10G[25G](4)": ["Eth11-1", "Eth11-2", "Eth11-3", "Eth11-4"]
+            }
+        },
+        "Ethernet88": {
+            "index": "11,11,11,11,11,11,11,11",
+            "lanes": "129,130,131,132,133,134,135,136",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth12"],
+                "1x100G(4)": ["Eth12"],
+                "4x25G[10G](4)": ["Eth12-1", "Eth12-2", "Eth12-3", "Eth12-4"],
+                "4x10G[25G](4)": ["Eth12-1", "Eth12-2", "Eth12-3", "Eth12-4"]
+            }
+        },
+        "Ethernet96": {
+            "index": "12,12,12,12,12,12,12,12",
+            "lanes": "121,122,123,124,125,126,127,128",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth13"],
+                "1x100G(4)": ["Eth13"],
+                "4x25G[10G](4)": ["Eth13-1", "Eth13-2", "Eth13-3", "Eth13-4"],
+                "4x10G[25G](4)": ["Eth13-1", "Eth13-2", "Eth13-3", "Eth13-4"]
+            }
+        },
+        "Ethernet104": {
+            "index": "13,13,13,13,13,13,13,13",
+            "lanes": "113,114,115,116,117,118,119,120",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth14"],
+                "1x100G(4)": ["Eth14"],
+                "4x25G[10G](4)": ["Eth14-1", "Eth14-2", "Eth14-3", "Eth14-4"],
+                "4x10G[25G](4)": ["Eth14-1", "Eth14-2", "Eth14-3", "Eth14-4"]
+            }
+        },
+        "Ethernet112": {
+            "index": "14,14,14,14,14,14,14,14",
+            "lanes": "105,106,107,108,109,110,111,112",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth15"],
+                "1x100G(4)": ["Eth15"],
+                "4x25G[10G](4)": ["Eth15-1", "Eth15-2", "Eth15-3", "Eth15-4"],
+                "4x10G[25G](4)": ["Eth15-1", "Eth15-2", "Eth15-3", "Eth15-4"]
+            }
+        },
+        "Ethernet120": {
+            "index": "15,15,15,15,15,15,15,15",
+            "lanes": "97,98,99,100,101,102,103,104",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth16"],
+                "1x100G(4)": ["Eth16"],
+                "4x25G[10G](4)": ["Eth16-1", "Eth16-2", "Eth16-3", "Eth16-4"],
+                "4x10G[25G](4)": ["Eth16-1", "Eth16-2", "Eth16-3", "Eth16-4"]
+            }
+        },
+        "Ethernet128": {
+            "index": "16,16,16,16,16,16,16,16",
+            "lanes": "209,210,211,212,213,214,215,216",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth17"],
+                "1x100G(4)": ["Eth17"],
+                "4x25G[10G](4)": ["Eth17-1", "Eth17-2", "Eth17-3", "Eth17-4"],
+                "4x10G[25G](4)": ["Eth17-1", "Eth17-2", "Eth17-3", "Eth17-4"]
+            }
+        },
+        "Ethernet136": {
+            "index": "17,17,17,17,17,17,17,17",
+            "lanes": "217,218,219,220,221,222,223,224",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth18"],
+                "1x100G(4)": ["Eth18"],
+                "4x25G[10G](4)": ["Eth18-1", "Eth18-2", "Eth18-3", "Eth18-4"],
+                "4x10G[25G](4)": ["Eth18-1", "Eth18-2", "Eth18-3", "Eth18-4"]
+            }
+        },
+        "Ethernet144": {
+            "index": "18,18,18,18,18,18,18,18",
+            "lanes": "193,194,195,196,197,198,199,200",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth19"],
+                "1x100G(4)": ["Eth19"],
+                "4x25G[10G](4)": ["Eth19-1", "Eth19-2", "Eth19-3", "Eth19-4"],
+                "4x10G[25G](4)": ["Eth19-1", "Eth19-2", "Eth19-3", "Eth19-4"]
+            }
+        },
+        "Ethernet152": {
+            "index": "19,19,19,19,19,19,19,19",
+            "lanes": "201,202,203,204,205,206,207,208",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth20"],
+                "1x100G(4)": ["Eth20"],
+                "4x25G[10G](4)": ["Eth20-1", "Eth20-2", "Eth20-3", "Eth20-4"],
+                "4x10G[25G](4)": ["Eth20-1", "Eth20-2", "Eth20-3", "Eth20-4"]
+            }
+        },
+        "Ethernet160": {
+            "index": "20,20,20,20,20,20,20,20",
+            "lanes": "177,178,179,180,181,182,183,184",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth21"],
+                "1x100G(4)": ["Eth21"],
+                "4x25G[10G](4)": ["Eth21-1", "Eth21-2", "Eth21-3", "Eth21-4"],
+                "4x10G[25G](4)": ["Eth21-1", "Eth21-2", "Eth21-3", "Eth21-4"]
+            }
+        },
+        "Ethernet168": {
+            "index": "21,21,21,21,21,21,21,21",
+            "lanes": "185,186,187,188,189,190,191,192",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth22"],
+                "1x100G(4)": ["Eth22"],
+                "4x25G[10G](4)": ["Eth22-1", "Eth22-2", "Eth22-3", "Eth22-4"],
+                "4x10G[25G](4)": ["Eth22-1", "Eth22-2", "Eth22-3", "Eth22-4"]
+            }
+        },
+        "Ethernet176": {
+            "index": "22,22,22,22,22,22,22,22",
+            "lanes": "161,162,163,164,165,166,167,168",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth23"],
+                "1x100G(4)": ["Eth23"],
+                "4x25G[10G](4)": ["Eth23-1", "Eth23-2", "Eth23-3", "Eth23-4"],
+                "4x10G[25G](4)": ["Eth23-1", "Eth23-2", "Eth23-3", "Eth23-4"]
+            }
+        },
+        "Ethernet184": {
+            "index": "23,23,23,23,23,23,23,23",
+            "lanes": "169,170,171,172,173,174,175,176",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth24"],
+                "1x100G(4)": ["Eth24"],
+                "4x25G[10G](4)": ["Eth24-1", "Eth24-2", "Eth24-3", "Eth24-4"],
+                "4x10G[25G](4)": ["Eth24-1", "Eth24-2", "Eth24-3", "Eth24-4"]
+            }
+        },
+        "Ethernet192": {
+            "index": "24,24,24,24,24,24,24,24",
+            "lanes": "17,18,19,20,21,22,23,24",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth25"],
+                "1x100G(4)": ["Eth25"],
+                "4x25G[10G](4)": ["Eth25-1", "Eth25-2", "Eth25-3", "Eth25-4"],
+                "4x10G[25G](4)": ["Eth25-1", "Eth25-2", "Eth25-3", "Eth25-4"]
+            }
+        },
+        "Ethernet200": {
+            "index": "25,25,25,25,25,25,25,25",
+            "lanes": "25,26,27,28,29,30,31,32",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth26"],
+                "1x100G(4)": ["Eth26"],
+                "4x25G[10G](4)": ["Eth26-1", "Eth26-2", "Eth26-3", "Eth26-4"],
+                "4x10G[25G](4)": ["Eth26-1", "Eth26-2", "Eth26-3", "Eth26-4"]
+            }
+        },
+        "Ethernet208": {
+            "index": "26,26,26,26,26,26,26,26",
+            "lanes": "1,2,3,4,5,6,7,8",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth27"],
+                "1x100G(4)": ["Eth27"],
+                "4x25G[10G](4)": ["Eth27-1", "Eth27-2", "Eth27-3", "Eth27-4"],
+                "4x10G[25G](4)": ["Eth27-1", "Eth27-2", "Eth27-3", "Eth27-4"]
+            }
+        },
+        "Ethernet216": {
+            "index": "27,27,27,27,27,27,27,27",
+            "lanes": "9,10,11,12,13,14,15,16",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth28"],
+                "1x100G(4)": ["Eth28"],
+                "4x25G[10G](4)": ["Eth28-1", "Eth28-2", "Eth28-3", "Eth28-4"],
+                "4x10G[25G](4)": ["Eth28-1", "Eth28-2", "Eth28-3", "Eth28-4"]
+            }
+        },
+        "Ethernet224": {
+            "index": "28,28,28,28,28,28,28,28",
+            "lanes": "241,242,243,244,245,246,247,248",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth29"],
+                "1x100G(4)": ["Eth29"],
+                "4x25G[10G](4)": ["Eth29-1", "Eth29-2", "Eth29-3", "Eth29-4"],
+                "4x10G[25G](4)": ["Eth29-1", "Eth29-2", "Eth29-3", "Eth29-4"]
+            }
+        },
+        "Ethernet232": {
+            "index": "29,29,29,29,29,29,29,29",
+            "lanes": "249,250,251,252,253,254,255,256",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth30"],
+                "1x100G(4)": ["Eth30"],
+                "4x25G[10G](4)": ["Eth30-1", "Eth30-2", "Eth30-3", "Eth30-4"],
+                "4x10G[25G](4)": ["Eth30-1", "Eth30-2", "Eth30-3", "Eth30-4"]
+            }
+        },
+        "Ethernet240": {
+            "index": "30,30,30,30,30,30,30,30",
+            "lanes": "225,226,227,228,229,230,231,232",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth31"],
+                "1x100G(4)": ["Eth31"],
+                "4x25G[10G](4)": ["Eth31-1", "Eth31-2", "Eth31-3", "Eth31-4"],
+                "4x10G[25G](4)": ["Eth31-1", "Eth31-2", "Eth31-3", "Eth31-4"]
+            }
+        },
+        "Ethernet248": {
+            "index": "31,31,31,31,31,31,31,31",
+            "lanes": "233,234,235,236,237,238,239,240",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth32"],
+                "1x100G(4)": ["Eth32"],
+                "4x25G[10G](4)": ["Eth32-1", "Eth32-2", "Eth32-3", "Eth32-4"],
+                "4x10G[25G](4)": ["Eth32-1", "Eth32-2", "Eth32-3", "Eth32-4"]
+            }
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/plugins/sfputil.py b/device/wistron/x86_64-wistron_6512_32r-r0/plugins/sfputil.py
index 8dbc6ba8519a..c38b792bb9ca 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/plugins/sfputil.py
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/plugins/sfputil.py
@@ -111,6 +111,7 @@ def get_presence(self, port_num):
             val_file.close()
         except IOError as e:
             print("Error: unable to access file: %s" % str(e))
+            val_file.close()
             return False
 
         if content == "1":
@@ -134,6 +135,7 @@ def get_low_power_mode(self, port_num):
             val_file.close()
         except IOError as e:
             print("Error: unable to access file: %s" % str(e))
+            val_file.close()
             return False
 
         if content == "1":
@@ -158,10 +160,35 @@ def set_low_power_mode(self, port_num, lpmode):
             return True
         except IOError as e:
             print("Error: unable to open file: %s" % str(e))
+            val_file.close()
             return False
 
     def reset(self, port_num):
-        raise NotImplementedError
+        if port_num < self.port_start or port_num > self.port_end:
+            return False
+        if not self.get_presence(port_num):
+            return False  # Port is not present, unable to set reset
+
+        if port_num < 16:
+            reset_path = self.BASE_CPLD1_PATH + "port" + str(port_num+1) + "_reset"
+        else:
+            reset_path = self.BASE_CPLD2_PATH + "port" + str(port_num+1) + "_reset"
+
+        self.__port_to_mod_rst = reset_path
+
+        try:
+            val_file = open(self.__port_to_mod_rst, 'w')
+            val_file.write('1')
+            time.sleep(1)
+            val_file.write('0')
+            time.sleep(1)
+            val_file.close()
+            return True
+        except IOError as e:
+            print("Error: unable to open file: %s" % str(e))
+            val_file.close()
+            return False
+
 
     def _get_sfp_presence(self):
         port_pres = {}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/fan.py b/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/fan.py
deleted file mode 100644
index aec7e23be5c0..000000000000
--- a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/fan.py
+++ /dev/null
@@ -1,182 +0,0 @@
-#!/usr/bin/env python
-
-#############################################################################
-#
-# Module contains an implementation of SONiC Platform Base API and
-# provides the fan status which are available in the platform
-#
-#############################################################################
-
-import os.path
-
-try:
-    from sonic_platform_base.fan_base import FanBase
-except ImportError as e:
-    raise ImportError(str(e) + "- required module not found")
-
-FAN_PATH = "/sys/bus/i2c/devices/0-0044/"
-FANTRAY_NAME_LIST = ["FANTRAY-1", "FANTRAY-2",
-                     "FANTRAY-3", "FANTRAY-4",
-                     "FANTRAY-5", "FANTRAY-6", "FANTRAY-7"]
-FAN_NAME_LIST = ["fan1_front","fan2_front","fan3_front","fan4_front","fan5_front","fan6_front", "fan7_front",\
-"fan1_rear","fan2_rear","fan3_rear","fan4_rear", "fan5_rear", "fan6_rear", "fan7_rear",]
-
-class Fan(FanBase):
-    """Platform-specific Fan class"""
-
-    def __init__(self, fan_index):
-        self.fan_tray_index = fan_index
-        self.fan_presence = "fan{}_present"
-        self.fan_direction = "fan{}_direction"
-        self.fan_speed_rpm = "fan{}_input"
-        FanBase.__init__(self)
-
-    def __read_txt_file(self, file_path):
-        try:
-            with open(file_path, 'r') as fd:
-                data = fd.read()
-                return data.strip()
-        except IOError:
-            pass
-        return ""
-
-    def __write_txt_file(self, file_path, value):
-        try:
-            with open(file_path, 'w') as fd:
-                fd.write(str(value))
-        except BaseException:
-            return False
-        return True
-
-    def __search_file_by_name(self, directory, file_name):
-        for dirpath, dirnames, files in os.walk(directory):
-            for name in files:
-                file_path = os.path.join(dirpath, name)
-                if name in file_name:
-                    return file_path
-        return None
-
-    def get_direction(self):
-        """
-        Retrieves the direction of fan
-        Returns:
-            A string, either FAN_DIRECTION_INTAKE or FAN_DIRECTION_EXHAUST
-            depending on fan direction
-        """
-        index1=self.fan_tray_index
-        if self.fan_tray_index>6:
-            index1=self.fan_tray_index%7
-        fan_direction_file = (FAN_PATH +
-            self.fan_direction.format(index1+1))
-        raw = self.__read_txt_file(fan_direction_file).strip('\r\n')
-        direction = self.FAN_DIRECTION_INTAKE if str(
-            raw).upper() == "1" else self.FAN_DIRECTION_EXHAUST
-
-        return direction
-
-    def get_speed(self):
-        """
-        Retrieves the speed of fan as a percentage of full speed
-        Returns:
-            An integer, the percentage of full fan speed, in the range 0 (off)
-                 to 12000 (full speed)
-        """
-
-        speed = 0
-        if self.fan_tray_index<=13:
-            index1=self.fan_tray_index
-            if self.get_presence():
-                fan_speed_file = (FAN_PATH +
-                self.fan_speed_rpm.format(index1+1))
-                speed = self.__read_txt_file(fan_speed_file).strip('\r\n')
-
-        return int(speed)
-
-    def get_target_speed(self):
-        """
-        Retrieves the target (expected) speed of the fan
-        Returns:
-            An integer, the percentage of full fan speed, in the range 0 (off)
-                 to 100 (full speed)
-        """
-
-        speed = 0
-        if self.fan_tray_index<=13:
-            index1=self.fan_tray_index
-            if self.get_presence():
-                fan_speed_file = (FAN_PATH +
-                self.fan_speed_rpm.format(index1+1))
-                speed = self.__read_txt_file(fan_speed_file).strip('\r\n')
-
-        return int(speed)
-
-    def get_speed_tolerance(self):
-        """
-        Retrieves the speed tolerance of the fan
-        Returns:
-            An integer, the percentage of variance from target speed which is
-                 considered tolerable
-        """
-        return 10
-
-    def set_speed(self, speed):
-        """
-        Sets the fan speed
-        Args:
-            speed: An integer, the percentage of full fan speed to set fan to,
-                   in the range 0 (off) to 100 (full speed)
-        Returns:
-            A boolean, True if speed is set successfully, False if not
-
-        Note:
-            Depends on pwm or target mode is selected:
-            1) pwm = speed_pc * 255             <-- Currently use this mode.
-            2) target_pwm = speed_pc * 100 / 255
-             2.1) set pwm{}_enable to 3
-
-        """
-        return False
-
-    def set_status_led(self, color):
-        """
-        Sets the state of the fan module status LED
-        Args:
-            color: A string representing the color with which to set the
-                   fan module status LED
-        Returns:
-            bool: True if status LED state is set successfully, False if not
-        """
-        return False
-
-    def get_name(self):
-        """
-        Retrieves the name of the device
-            Returns:
-            string: The name of the device
-        """
-        fan_name = FAN_NAME_LIST[self.fan_tray_index]
-
-        return fan_name
-
-    def get_presence(self):
-        """
-        Retrieves the presence of the PSU
-        Returns:
-            bool: True if PSU is present, False if not
-        """
-        index1=self.fan_tray_index
-        if self.fan_tray_index>6:
-            index1=self.fan_tray_index%7
-        fan_direction_file = (FAN_PATH +
-                              self.fan_presence.format(index1+1))
-        present_str = self.__read_txt_file(fan_direction_file) or '1'
-
-        return int(present_str) == 1
-
-    def get_status(self):
-        """
-        Retrieves the operational status of the device
-        Returns:
-            A boolean value, True if device is operating properly, False if not
-        """
-        return self.get_presence() and self.get_speed() > 0
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/psu.py b/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/psu.py
deleted file mode 100644
index dc13cc1ed824..000000000000
--- a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/psu.py
+++ /dev/null
@@ -1,248 +0,0 @@
-#!/usr/bin/env python
-
-#############################################################################
-# psuutil.py
-# Platform-specific PSU status interface for SONiC
-#############################################################################
-
-try:
-    from sonic_platform_base.psu_base import PsuBase
-except ImportError as e:
-    raise ImportError(str(e) + "- required module not found")
-
-PSU_NAME_LIST = ["PSU-1", "PSU-2"]
-
-class Psu(PsuBase):
-    """Platform-specific Psu class"""
-
-    SYSFS_PSU_DIR = ["/sys/bus/i2c/devices/0-005a",
-                     "/sys/bus/i2c/devices/0-0059"]
-
-    def __init__(self, psu_index):
-        self.index = psu_index
-        PsuBase.__init__(self)
-
-
-    def get_fan(self):
-        """
-        Retrieves object representing the fan module contained in this PSU
-        Returns:
-            An object dervied from FanBase representing the fan module
-            contained in this PSU
-        """
-        # Hardware not supported
-        return False
-
-    def get_powergood_status(self):
-        """
-        Retrieves the powergood status of PSU
-        Returns:
-            A boolean, True if PSU has stablized its output voltages and passed all
-            its internal self-tests, False if not.
-        """
-        return self.get_status()
-
-    def set_status_led(self, color):
-        """
-        Sets the state of the PSU status LED
-        Args:
-            color: A string representing the color with which to set the PSU status LED
-                   Note: Only support green and off
-        Returns:
-            bool: True if status LED state is set successfully, False if not
-        """
-        # Hardware not supported
-        return False
-
-    def get_name(self):
-        """
-        Retrieves the name of the device
-            Returns:
-            string: The name of the device
-        """
-        return PSU_NAME_LIST[self.index]
-
-    def get_presence(self):
-        """
-        Retrieves the presence of the PSU
-        Returns:
-            bool: True if PSU is present, False if not
-        """
-        attr_file ='present'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        status = 0
-        try:
-            with open(attr_path, 'r') as psu_prs:
-                status = int(psu_prs.read())
-        except IOError:
-            return False
-
-        return status == 1
-
-    def get_status(self):
-        """
-        Retrieves the operational status of the device
-        Returns:
-            A boolean value, True if device is operating properly, False if not
-        """
-        attr_file = 'power_good'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        status = 0
-        try:
-            with open(attr_path, 'r') as power_status:
-                status = int(power_status.read())
-        except IOError:
-            return False
-
-        return status == 1
-
-    def get_model(self):
-        """
-        Retrieves the model number/name of a power supply unit (PSU) defined
-                by 1-based index <idx>
-        :param idx: An integer, 1-based index of the PSU of which to query model number
-        :return: String, denoting model number/name
-        """
-        attr_file ='model'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        model = ""
-        try:
-            with open(attr_path, 'r') as psu_model:
-                model = psu_model.read()
-        except IOError:
-            return model
-
-        return model
-
-    def get_mfr_id(self):
-        """
-        Retrieves the manufacturing id of a power supply unit (PSU) defined
-                by 1-based index <idx>
-        :param idx: An integer, 1-based index of the PSU of which to query mfr id
-        :return: String, denoting manufacturing id
-        """
-        attr_file ='vendor'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        vendor = ""
-        try:
-            with open(attr_path, 'r') as psu_vendor:
-                vendor = psu_vendor.read()
-        except IOError:
-            return vendor
-
-        return vendor
-
-    def get_serial(self):
-        """
-        Retrieves the serial number of a power supply unit (PSU) defined
-                by 1-based index <idx>
-        :param idx: An integer, 1-based index of the PSU of which to query serial number
-        :return: String, denoting serial number of the PSU unit
-        """
-        attr_file ='sn'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        sn = ""
-        try:
-            with open(attr_path, 'r') as psu_sn:
-                sn = psu_sn.read()
-        except IOError:
-            return sn
-
-        return sn
-
-    def get_temperature(self):
-        """
-        Retrieves current temperature reading from PSU
-        Returns:
-            A float number of current temperature in Celsius up to nearest thousandth
-            of one degree Celsius, e.g. 30.125
-        """
-        attr_file ='temp1_input'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        temp = 0.0
-        try:
-            with open(attr_path, 'r') as psu_temp:
-                temp = float(psu_temp.read()) / 1000
-        except IOError:
-            return temp
-
-        return temp
-
-    def get_temperature_high_threshold(self):
-        """
-        Retrieves the high threshold temperature of PSU
-        Returns:
-            A float number, the high threshold temperature of PSU in Celsius
-            up to nearest thousandth of one degree Celsius, e.g. 30.125
-        """
-        return False #Not supported
-
-    def get_voltage_high_threshold(self):
-        """
-        Retrieves the high threshold PSU voltage output
-        Returns:
-            A float number, the high threshold output voltage in volts,
-            e.g. 12.1
-        """
-        return False #Not supported
-
-    def get_voltage_low_threshold(self):
-        """
-        Retrieves the low threshold PSU voltage output
-        Returns:
-            A float number, the low threshold output voltage in volts,
-            e.g. 12.1
-        """
-        return False #Not supported
-
-    def get_voltage(self):
-        """
-        Retrieves current PSU voltage output
-        Returns:
-            A float number, the output voltage in volts,
-            e.g. 12.1
-        """
-        attr_file ='in2_input'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        volt = 0.0
-        try:
-            with open(attr_path, 'r') as psu_volt:
-                volt = float(psu_volt.read()) / 1000
-        except IOError:
-            return volt
-
-        return volt
-
-    def get_current(self):
-        """
-        Retrieves present electric current supplied by PSU
-        Returns:
-            A float number, the electric current in amperes, e.g 15.4
-        """
-        attr_file ='curr2_input'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        curr = 0.0
-        try:
-            with open(attr_path, 'r') as psu_curr:
-                curr = float(psu_curr.read()) / 1000
-        except IOError:
-            return curr
-
-        return curr
-
-    def get_power(self):
-        """
-        Retrieves current energy supplied by PSU
-        Returns:
-            A float number, the power in watts, e.g. 302.6
-        """
-        attr_file ='power2_input'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
-        power = 0.0
-        try:
-            with open(attr_path, 'r') as psu_power:
-                power = float(psu_power.read()) / 1000000
-        except IOError:
-            return power
-
-        return power
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/watchdog.py b/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/watchdog.py
deleted file mode 100644
index 820dd54f954a..000000000000
--- a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/watchdog.py
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/usr/bin/env python
-
-########################################################################
-#
-# Abstract base class for implementing a platform-specific class with
-# which to interact with a hardware watchdog module in SONiC
-#
-########################################################################
-
-try:
-    from sonic_platform_base.watchdog_base import WatchdogBase
-except ImportError as e:
-    raise ImportError(str(e) + "- required module not found")
-
-class Watchdog(WatchdogBase):
-    """
-    Abstract base class for interfacing with a hardware watchdog module
-    """
-
-    def __init__(self):
-        print("INFO: Watchdog __init__")
-
-    def arm(self, seconds):
-        """
-        Arm the hardware watchdog with a timeout of <seconds> seconds.
-        If the watchdog is currently armed, calling this function will
-        simply reset the timer to the provided value. If the underlying
-        hardware does not support the value provided in <seconds>, this
-        method should arm the watchdog with the *next greater*
-        available value.
-        Returns:
-            An integer specifying the *actual* number of seconds the
-            watchdog was armed with. On failure returns -1.
-        """
-        print("ERROR: Platform did not implement arm()")
-        raise NotImplementedError
-
-    def disarm(self):
-        """
-        Disarm the hardware watchdog
-        Returns:
-            A boolean, True if watchdog is disarmed successfully, False
-            if not
-        """
-        print("ERROR: Platform did not implement disarm()")
-        raise NotImplementedError
-
-    def is_armed(self):
-        """
-        Retrieves the armed state of the hardware watchdog.
-        Returns:
-            A boolean, True if watchdog is armed, False if not
-        """
-        print("ERROR: Platform did not implement is_armed()")
-        raise NotImplementedError
-
-    def get_remaining_time(self):
-        """
-        If the watchdog is armed, retrieve the number of seconds
-        remaining on the watchdog timer
-        Returns:
-            An integer specifying the number of seconds remaining on
-            their watchdog timer. If the watchdog is not armed, returns
-            -1.
-            S5232 doesnot have hardware support to show remaining time.
-            Due to this limitation, this API is implemented in software.
-            This API would return correct software time difference if it
-            is called from the process which armed the watchdog timer.
-            If this API called from any other process, it would return
-            0. If the watchdog is not armed, this API would return -1.
-        """
-        print("ERROR: Platform did not implement get_remaining_time()")
-        raise NotImplementedError
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/system_health_monitoring_config.json b/device/wistron/x86_64-wistron_6512_32r-r0/system_health_monitoring_config.json
new file mode 100644
index 000000000000..0e0eec971cac
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/system_health_monitoring_config.json
@@ -0,0 +1,11 @@
+{
+    "services_to_ignore": [],
+    "devices_to_ignore": ["asic"],
+    "user_defined_checkers": [],
+    "polling_interval": 60,
+    "led_color": {
+        "fault": "red",
+        "normal": "green",
+        "booting": "green_blinking"
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/6512-32_32x400G.config.yaml b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/6512-32_32x400G.config.yaml
index 17ed53abb1d0..cc5bebd7f719 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/6512-32_32x400G.config.yaml
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/6512-32_32x400G.config.yaml
@@ -9,16 +9,17 @@ nodes:
     netdev:
     - auto_create: "no"
       multi_interface: "yes"
-    mac_clk: "1340"
-    skip_pll_check: "false"
-    sys_clk: "1720"
-    mbist_on_init: "true"
-    ifc_clk: "1200"
     buffer_management_mode: "api_driven"
+    wred_cr_ip_proto_list: "17"
+    cr_assignment_mode: "1"
     max_lossless_tc: "2"
     ilpm_enable: "1"
     forward_profile: "IFCS_FORWARD_PROFILE_ID_PROFILE_E"
-    ecn_stats_enable: "1"
+    led_cfg_sck_rate: "0x5"
+    led_refresh_precliff_timer: "0x18eec2"
+    led_refresh_cliff_timer: "0x15e"
+    led_cfg_pic_stream_mode: "1"
+    led_refresh_tmr_ctl_enable: "1"
     txring:
     - txring_id: "0"
       desc_count: "1024"
@@ -41,22 +42,24 @@ nodes:
       desc_count: "1024"
       prio: "1"
       netdev: "true"
-      queues: "0, 4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44"
+      queues: "0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39"
     - rxring_id: "1"
       desc_count: "1024"
       prio: "1"
       netdev: "true"
-      queues: "1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45"
+      queues: "1, 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40"
     - rxring_id: "2"
       desc_count: "1024"
       prio: "1"
       netdev: "true"
-      queues: "2, 6, 10, 14, 18, 22, 26, 30, 34, 38, 42, 46"
+      queues: "2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 47"
     - rxring_id: "3"
       desc_count: "1024"
       prio: "1"
-      netdev: "true"
-      queues: "3, 7, 11, 15, 19, 23, 27, 31, 35, 39, 43, 47"
+      queues: "42, 43, 44, 45, 46"
+    sys_clk: "1720"
+    ifc_clk: "1200"
+    mac_clk: "1340"
   devports:
   - id: "0"
     sysport: "1000"
@@ -285,20 +288,6 @@ nodes:
     speed: "400G"
     sysport: "233"
     type: "eth"
-  - id: "257"
-    fec: "NONE"
-    lanes: "0:1"
-    serdes_group: "32"
-    speed: "10G"
-    sysport: "257"
-    type: "mgmt 0"
-  - id: "258"
-    fec: "NONE"
-    lanes: "1:1"
-    serdes_group: "32"
-    speed: "10G"
-    sysport: "258"
-    type: "mgmt 1"
   isg:
   - id: "11"
     lane_swap: "27163504"
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers.json.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers.json.j2
index 1a31812c26b1..b9265c62eb8f 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers.json.j2
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers.json.j2
@@ -1,3 +1,63 @@
+{# Default values which will be used if no actual configuration available #}
+{% set default_cable = '40m' %}
+
+{# Port configuration to cable length look-up table #}
+{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #}
+{# Roles described in the minigraph #}
+{% set ports2cable = {
+        'torrouter_server'       : '5m',
+        'leafrouter_torrouter'   : '40m',
+        'spinerouter_leafrouter' : '300m'
+        }
+%}
+
+{%- macro cable_length(port_name) %}
+    {%- set cable_len = [] %}
+    {%- for local_port in DEVICE_NEIGHBOR %}
+        {%- if local_port == port_name %}
+            {%- if DEVICE_NEIGHBOR_METADATA is defined and DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor_role = neighbor.type %}
+                {%- set roles1 = switch_role + '_' + neighbor_role %}
+                {%- set roles2 = neighbor_role + '_' + switch_role %}
+                {%- set roles1 = roles1 | lower %}
+                {%- set roles2 = roles2 | lower %}
+                {%- if roles1 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles1]) %}{% endif %}
+                {%- elif roles2 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles2]) %}{% endif %}
+                {%- endif %}
+            {%- endif %}
+        {%- endif %}
+    {%- endfor %}
+    {%- if cable_len -%}
+        {{ cable_len.0 }}
+    {%- else %}
+        {%- if switch_role.lower() == 'torrouter' %}
+            {%- for local_port in VLAN_MEMBER %}
+                {%- if local_port[1] == port_name %}
+                    {%- set roles3 = switch_role + '_' + 'server' %}
+                    {%- set roles3 = roles3 | lower %}
+                    {%- if roles3 in ports2cable %}
+                        {%- if cable_len.append(ports2cable[roles3]) %}{% endif %}
+                    {%- endif %}
+                {%- endif %}
+            {%- endfor %}
+            {%- if cable_len -%}
+                {{ cable_len.0 }}
+            {%- else -%}
+                {{ default_cable }}
+            {%- endif %}
+        {%- else -%}
+            {{ default_cable }}
+        {%- endif %}
+    {%- endif %}
+{%- endmacro %}
+
+{%- if DEVICE_METADATA is defined %}
+{%- set switch_role = DEVICE_METADATA['localhost']['type'] %}
+{%- endif -%}
+
 {% set port_names_list = [] %}
 {% for port in PORT %}
     {%- if port_names_list.append(port) %}{% endif %}
@@ -5,34 +65,98 @@
 {% set port_names = port_names_list | join(',') -%}
 
 {
+    "CABLE_LENGTH": {
+        "AZURE": {
+    {% for port in PORT %}
+        {% set cable = cable_length(port) -%}
+        "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %}
+
+    {% endfor %}
+    }
+    },
     "BUFFER_POOL": {
+        "ingress_lossless_pool": {
+            "size": "51691264",
+            "type": "ingress",
+            "mode": "dynamic",
+            "xoff": "17708800"
+        },
         "lossy_pool": {
-            "size": "56985600",
+            "size": "18874368",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "70565632",
+            "type": "egress",
+            "mode": "static"
         }
     },
     "BUFFER_PROFILE": {
+        "ingress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "xoff":"135520",
+            "size":"1518",
+            "dynamic_th":"1",
+            "xon_offset":"9408"
+        },
+        "egress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "size":"0",
+            "static_th":"10243072"
+        },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers_defaults_def_lossy.j2
index 1a31812c26b1..79dbf9b2864b 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers_defaults_def_lossy.j2
@@ -7,7 +7,7 @@
 {
     "BUFFER_POOL": {
         "lossy_pool": {
-            "size": "56985600",
+            "size": "61458432",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
@@ -15,24 +15,28 @@
     },
     "BUFFER_PROFILE": {
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "ingress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     },
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers_defaults_t1.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers_defaults_t1.j2
index 93dac6b1992a..b9265c62eb8f 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/buffers_defaults_t1.j2
@@ -1,4 +1,4 @@
-{# Default values which will be used if no actual configura available #}
+{# Default values which will be used if no actual configuration available #}
 {% set default_cable = '40m' %}
 
 {# Port configuration to cable length look-up table #}
@@ -76,7 +76,7 @@
     },
     "BUFFER_POOL": {
         "ingress_lossless_pool": {
-            "size": "47218432",
+            "size": "51691264",
             "type": "ingress",
             "mode": "dynamic",
             "xoff": "17708800"
@@ -86,52 +86,77 @@
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "70565632",
+            "type": "egress",
+            "mode": "static"
         }
     },
     "BUFFER_PROFILE": {
         "ingress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
-            "xoff":"38816",
+            "pool":"ingress_lossless_pool",
+            "xoff":"135520",
             "size":"1518",
             "dynamic_th":"1",
-            "xon_offset":"13440"
+            "xon_offset":"9408"
         },
         "egress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        },
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]"
-        },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|egress_lossless_profile]"
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
         },
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
         },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/hwsku.json b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/hwsku.json
new file mode 100644
index 000000000000..7157f361663e
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/hwsku.json
@@ -0,0 +1,132 @@
+{
+    "interfaces": {
+        "Ethernet0": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet8": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet16": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet24": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet32": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet40": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet48": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet56": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet64": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet72": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet80": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet88": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet96": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet104": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet112": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet120": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet128": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet136": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet144": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet152": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet160": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet168": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet176": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet184": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet192": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet200": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet208": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet216": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet224": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet232": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet240": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet248": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/innovium.77700_A b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/innovium.77700_A
index 84aa41983606..ec13307805e1 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/innovium.77700_A
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/innovium.77700_A
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/innovium.77700_B b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/innovium.77700_B
index 27297b313959..57ba52cbc3bc 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/innovium.77700_B
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/innovium.77700_B
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/ivm.sai.config.yaml b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/ivm.sai.config.yaml
index cf505b299dd8..e3db67a5ccc5 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/ivm.sai.config.yaml
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/ivm.sai.config.yaml
@@ -3,6 +3,7 @@ IFCS_SKU_FILE : "/usr/share/sonic/hwsku/innovium.77700_A"
 IFCS_INNO_CLI_PORT : "9999"
 IFCS_TARGET : "device"
 INNOVIUM_DIR : "/innovium"
-PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes"
+PLATFORM_LIBRARY: "/usr/share/sonic/platform/lib_ivm_serdes_pltfm.so"
+PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes:$INNOVIUM_DIR/ifcs_cmds:$INNOVIUM_DIR/testutil"
 IVM_SAI_DATAPATH_CONFIG_FILE: "/usr/share/sonic/hwsku/ivm.sai.datapath.config.yaml"
 IVM_SAI_PARAM_A0008: "32"
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/ivm.sai.datapath.config.yaml b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/ivm.sai.datapath.config.yaml
index 891b0b3e2834..a539d6c70040 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/ivm.sai.datapath.config.yaml
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/ivm.sai.datapath.config.yaml
@@ -1,9 +1,9 @@
-ISAI_PARAM_P0_0_LS : "4608 4608 4608 4608 2880 2880"
-ISAI_PARAM_P0_1_LS : "2226 1946 1946 1890 1218 1218"
+ISAI_PARAM_P0_0_LS : "864 864 720 720 720 720"
+ISAI_PARAM_P0_1_LS : "770 490 434 378 378 378"
 ISAI_PARAM_P0_1_ALS : "434 154 154 98 98 98"
-ISAI_PARAM_P1_0_LS : "1536 1536 1536 1536 960 960"
-ISAI_PARAM_P1_0_LL : "3072 3072 3072 3072 1920 1920"
-ISAI_PARAM_P1_1_LS : "1778 1498 1498 1442 938 938"
-ISAI_PARAM_P1_1_LL : "2478 2478 2478 2478 2478 2478"
+ISAI_PARAM_P1_0_LS : "288 288 240 240 240 240"
+ISAI_PARAM_P1_0_LL : "576 576 480 480 480 480"
+ISAI_PARAM_P1_1_LS : "686 406 364 308 308 308"
+ISAI_PARAM_P1_1_LL : "574 574 574 574 574 574"
 ISAI_PARAM_P1_1_ALS : "434 154 154 98 98 98"
 ISAI_PARAM_P1_1_ALL : "126 126 126 126 126 126"
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/pg_profile_lookup.ini b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/pg_profile_lookup.ini
index adcb52ab2a29..0d881737cfa1 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/pg_profile_lookup.ini
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/pg_profile_lookup.ini
@@ -1,18 +1,22 @@
 # PG lossless profiles.
 # speed   cable size  xon  xoff  threshold xon_offset
-  25000   5m    1518  0    15680   1       13440
-  50000   5m    1518  0    21248   1       13440
-  100000  5m    1518  0    34624   1       13440
-  400000  5m    1518  0    117536  1       13440
-  25000   40m   1518  0    16928   1       13440
-  50000   40m   1518  0    23392   1       13440
-  100000  40m   1518  0    38816   1       13440
-  400000  40m   1518  0    135520  1       13440
-  25000   100m  1518  0    18848   1       13440
-  50000   100m  1518  0    27264   1       13440
-  100000  100m  1518  0    46496   1       13440
-  400000  100m  1518  0    166688  1       13440
-  25000   300m  1518  0    25184   1       13440
-  50000   300m  1518  0    40128   1       13440
-  100000  300m  1518  0    72384   1       13440
-  400000  300m  1518  0    268640  1       13440
+  25000   5m    1518  0    15680   1       9408
+  50000   5m    1518  0    21248   1       9408
+  100000  5m    1518  0    34624   1       9408
+  200000  5m    1518  0    62368   1       9408
+  400000  5m    1518  0    117536  1       9408
+  25000   40m   1518  0    16928   1       9408
+  50000   40m   1518  0    23392   1       9408
+  100000  40m   1518  0    38816   1       9408
+  200000  40m   1518  0    71904   1       9408
+  400000  40m   1518  0    135520  1       9408
+  25000   100m  1518  0    18848   1       9408
+  50000   100m  1518  0    27264   1       9408
+  100000  100m  1518  0    46496   1       9408
+  200000  100m  1518  0    87168   1       9408
+  400000  100m  1518  0    166688  1       9408
+  25000   300m  1518  0    25184   1       9408
+  50000   300m  1518  0    40128   1       9408
+  100000  300m  1518  0    72384   1       9408
+  200000  300m  1518  0    138112  1       9408
+  400000  300m  1518  0    268640  1       9408
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos.json.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos.json.j2
index 104d2d78de87..b03078465730 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos.json.j2
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos.json.j2
@@ -32,87 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"0",
-            "4":"0",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"0",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
-    },
-    "SCHEDULER": {
-        "scheduler.7": {
-            "type": "STRICT"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_enable": "3,4"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
-    "QUEUE": {
-        "{{ port_names }}|7": {
-            "scheduler": "[SCHEDULER|scheduler.7]"
+    "WRED_PROFILE": {
+        "AZURE_LOSSLESS" : {
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos_defaults_def_lossy.j2
index 104d2d78de87..c1170619bc6c 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos_defaults_def_lossy.j2
@@ -23,8 +23,8 @@
         "0": "0",
         "1": "0",
         "2": "0",
-        "3": "3",
-        "4": "4",
+        "3": "1",
+        "4": "2",
         "5": "0",
         "6": "0",
         "7": "0"
@@ -99,11 +99,14 @@
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "SCHEDULER": {
         "scheduler.7": {
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos_defaults_t1.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos_defaults_t1.j2
index 4b9748c7b594..b03078465730 100644
--- a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r/qos_defaults_t1.j2
@@ -32,83 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"3",
-            "4":"4",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"1",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
             "pfc_enable": "3,4"
-        }
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "WRED_PROFILE": {
         "AZURE_LOSSLESS" : {
-            "red_min_threshold":"50000"
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/6512-32_32x100G.config.yaml b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/6512-32_32x100G.config.yaml
new file mode 100644
index 000000000000..f22016d7be80
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/6512-32_32x100G.config.yaml
@@ -0,0 +1,419 @@
+ifcs:
+  options:
+    log_level: "info"
+nodes:
+- node_id: "0"
+  options:
+    sd_low_power_mode_global_default: "true"
+    sku: "configs/sku/innovium.77700_A"
+    netdev:
+    - auto_create: "no"
+      multi_interface: "yes"
+    buffer_management_mode: "api_driven"
+    wred_cr_ip_proto_list: "17"
+    cr_assignment_mode: "1"
+    max_lossless_tc: "2"
+    ilpm_enable: "1"
+    forward_profile: "IFCS_FORWARD_PROFILE_ID_PROFILE_E"
+    led_cfg_sck_rate: "0x5"
+    led_refresh_precliff_timer: "0x18eec2"
+    led_refresh_cliff_timer: "0x15e"
+    led_cfg_pic_stream_mode: "1"
+    led_refresh_tmr_ctl_enable: "1"
+    txring:
+    - txring_id: "0"
+      desc_count: "1024"
+      prio: "1"
+      netdev: "true"
+    - txring_id: "1"
+      desc_count: "1024"
+      prio: "1"
+      netdev: "true"
+    - txring_id: "2"
+      desc_count: "1024"
+      prio: "1"
+      netdev: "true"
+    - txring_id: "3"
+      desc_count: "1024"
+      prio: "1"
+      netdev: "true"
+    rxring:
+    - rxring_id: "0"
+      desc_count: "1024"
+      prio: "1"
+      netdev: "true"
+      queues: "0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39"
+    - rxring_id: "1"
+      desc_count: "1024"
+      prio: "1"
+      netdev: "true"
+      queues: "1, 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40"
+    - rxring_id: "2"
+      desc_count: "1024"
+      prio: "1"
+      netdev: "true"
+      queues: "2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 47"
+    - rxring_id: "3"
+      desc_count: "1024"
+      prio: "1"
+      queues: "42, 43, 44, 45, 46"
+    sys_clk: "1720"
+    ifc_clk: "1200"
+    mac_clk: "1340"
+  devports:
+  - id: "0"
+    sysport: "1000"
+    type: "cpu"
+  - id: "89"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "11"
+    speed: "100G"
+    sysport: "89"
+    type: "eth"
+  - id: "81"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "10"
+    speed: "100G"
+    sysport: "81"
+    type: "eth"
+  - id: "73"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "9"
+    speed: "100G"
+    sysport: "73"
+    type: "eth"
+  - id: "65"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "8"
+    speed: "100G"
+    sysport: "65"
+    type: "eth"
+  - id: "57"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "7"
+    speed: "100G"
+    sysport: "57"
+    type: "eth"
+  - id: "49"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "6"
+    speed: "100G"
+    sysport: "49"
+    type: "eth"
+  - id: "41"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "5"
+    speed: "100G"
+    sysport: "41"
+    type: "eth"
+  - id: "33"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "4"
+    speed: "100G"
+    sysport: "33"
+    type: "eth"
+  - id: "153"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "19"
+    speed: "100G"
+    sysport: "153"
+    type: "eth"
+  - id: "145"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "18"
+    speed: "100G"
+    sysport: "145"
+    type: "eth"
+  - id: "137"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "17"
+    speed: "100G"
+    sysport: "137"
+    type: "eth"
+  - id: "129"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "16"
+    speed: "100G"
+    sysport: "129"
+    type: "eth"
+  - id: "121"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "15"
+    speed: "100G"
+    sysport: "121"
+    type: "eth"
+  - id: "113"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "14"
+    speed: "100G"
+    sysport: "113"
+    type: "eth"
+  - id: "105"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "13"
+    speed: "100G"
+    sysport: "105"
+    type: "eth"
+  - id: "97"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "12"
+    speed: "100G"
+    sysport: "97"
+    type: "eth"
+  - id: "209"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "26"
+    speed: "100G"
+    sysport: "209"
+    type: "eth"
+  - id: "217"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "27"
+    speed: "100G"
+    sysport: "217"
+    type: "eth"
+  - id: "193"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "24"
+    speed: "100G"
+    sysport: "193"
+    type: "eth"
+  - id: "201"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "25"
+    speed: "100G"
+    sysport: "201"
+    type: "eth"
+  - id: "177"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "22"
+    speed: "100G"
+    sysport: "177"
+    type: "eth"
+  - id: "185"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "23"
+    speed: "100G"
+    sysport: "185"
+    type: "eth"
+  - id: "161"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "20"
+    speed: "100G"
+    sysport: "161"
+    type: "eth"
+  - id: "169"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "21"
+    speed: "100G"
+    sysport: "169"
+    type: "eth"
+  - id: "17"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "2"
+    speed: "100G"
+    sysport: "17"
+    type: "eth"
+  - id: "25"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "3"
+    speed: "100G"
+    sysport: "25"
+    type: "eth"
+  - id: "1"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "0"
+    speed: "100G"
+    sysport: "1"
+    type: "eth"
+  - id: "9"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "1"
+    speed: "100G"
+    sysport: "9"
+    type: "eth"
+  - id: "241"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "30"
+    speed: "100G"
+    sysport: "241"
+    type: "eth"
+  - id: "249"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "31"
+    speed: "100G"
+    sysport: "249"
+    type: "eth"
+  - id: "225"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "28"
+    speed: "100G"
+    sysport: "225"
+    type: "eth"
+  - id: "233"
+    fec: "KRFEC"
+    lanes: "0:4"
+    serdes_group: "29"
+    speed: "100G"
+    sysport: "233"
+    type: "eth"
+  isg:
+  - id: "11"
+    lane_swap: "27163504"
+    rx_polarity: "01010000"
+    tx_polarity: "01100000"
+  - id: "10"
+    lane_swap: "51604372"
+    rx_polarity: "11001000"
+    tx_polarity: "11110000"
+  - id: "9"
+    lane_swap: "17032546"
+    rx_polarity: "10001000"
+    tx_polarity: "00000100"
+  - id: "8"
+    lane_swap: "70435162"
+    rx_polarity: "11000100"
+    tx_polarity: "00100101"
+  - id: "7"
+    lane_swap: "27053416"
+    rx_polarity: "00011001"
+    tx_polarity: "10001000"
+  - id: "6"
+    lane_swap: "70635142"
+    rx_polarity: "10001000"
+    tx_polarity: "01100001"
+  - id: "5"
+    lane_swap: "27053416"
+    rx_polarity: "00001001"
+    tx_polarity: "00001000"
+  - id: "4"
+    lane_swap: "62405173"
+    rx_polarity: "11000101"
+    tx_polarity: "10110000"
+  - id: "19"
+    lane_swap: "06152347"
+    rx_polarity: "11010110"
+    tx_polarity: "10001110"
+  - id: "18"
+    lane_swap: "73614052"
+    rx_polarity: "11001100"
+    tx_polarity: "11100001"
+  - id: "17"
+    lane_swap: "17053426"
+    rx_polarity: "10001001"
+    tx_polarity: "00001000"
+  - id: "16"
+    lane_swap: "54216073"
+    rx_polarity: "10000011"
+    tx_polarity: "01001010"
+  - id: "15"
+    lane_swap: "36072514"
+    rx_polarity: "10100000"
+    tx_polarity: "10100001"
+  - id: "14"
+    lane_swap: "50763241"
+    rx_polarity: "00010001"
+    tx_polarity: "01110001"
+  - id: "13"
+    lane_swap: "26071435"
+    rx_polarity: "00000011"
+    tx_polarity: "00101001"
+  - id: "12"
+    lane_swap: "43510627"
+    rx_polarity: "11100100"
+    tx_polarity: "00011101"
+  - id: "26"
+    lane_swap: "31427506"
+    rx_polarity: "10011000"
+    tx_polarity: "11110001"
+  - id: "27"
+    lane_swap: "21735406"
+    rx_polarity: "01011110"
+    tx_polarity: "10011100"
+  - id: "24"
+    lane_swap: "07162435"
+    rx_polarity: "10010000"
+    tx_polarity: "10001010"
+  - id: "25"
+    lane_swap: "64501372"
+    rx_polarity: "11010001"
+    tx_polarity: "10001010"
+  - id: "22"
+    lane_swap: "35071624"
+    rx_polarity: "00100011"
+    tx_polarity: "11001011"
+  - id: "23"
+    lane_swap: "64705132"
+    rx_polarity: "11010100"
+    tx_polarity: "11101000"
+  - id: "20"
+    lane_swap: "16270453"
+    rx_polarity: "00101100"
+    tx_polarity: "00001001"
+  - id: "21"
+    lane_swap: "71356204"
+    rx_polarity: "01100010"
+    tx_polarity: "00001011"
+  - id: "2"
+    lane_swap: "37260145"
+    rx_polarity: "10011010"
+    tx_polarity: "11000000"
+  - id: "3"
+    lane_swap: "47512630"
+    rx_polarity: "10010100"
+    tx_polarity: "10101101"
+  - id: "0"
+    lane_swap: "05462713"
+    rx_polarity: "01000000"
+    tx_polarity: "10010010"
+  - id: "1"
+    lane_swap: "71605432"
+    rx_polarity: "00000000"
+    tx_polarity: "11000101"
+  - id: "30"
+    lane_swap: "37251604"
+    rx_polarity: "11000010"
+    tx_polarity: "11001000"
+  - id: "31"
+    lane_swap: "42736051"
+    rx_polarity: "10000110"
+    tx_polarity: "01000010"
+  - id: "28"
+    lane_swap: "01245736"
+    rx_polarity: "10110101"
+    tx_polarity: "10000001"
+  - id: "29"
+    lane_swap: "52706134"
+    rx_polarity: "00010010"
+    tx_polarity: "10101010"
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers.json.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers.json.j2
new file mode 100644
index 000000000000..020656fdb8f5
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers.json.j2
@@ -0,0 +1,162 @@
+{# Default values which will be used if no actual configura available #}
+{% set default_cable = '40m' %}
+
+{# Port configuration to cable length look-up table #}
+{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #}
+{# Roles described in the minigraph #}
+{% set ports2cable = {
+        'torrouter_server'       : '5m',
+        'leafrouter_torrouter'   : '40m',
+        'spinerouter_leafrouter' : '300m'
+        }
+%}
+
+{%- macro cable_length(port_name) %}
+    {%- set cable_len = [] %}
+    {%- for local_port in DEVICE_NEIGHBOR %}
+        {%- if local_port == port_name %}
+            {%- if DEVICE_NEIGHBOR_METADATA is defined and DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor_role = neighbor.type %}
+                {%- set roles1 = switch_role + '_' + neighbor_role %}
+                {%- set roles2 = neighbor_role + '_' + switch_role %}
+                {%- set roles1 = roles1 | lower %}
+                {%- set roles2 = roles2 | lower %}
+                {%- if roles1 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles1]) %}{% endif %}
+                {%- elif roles2 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles2]) %}{% endif %}
+                {%- endif %}
+            {%- endif %}
+        {%- endif %}
+    {%- endfor %}
+    {%- if cable_len -%}
+        {{ cable_len.0 }}
+    {%- else %}
+        {%- if switch_role.lower() == 'torrouter' %}
+            {%- for local_port in VLAN_MEMBER %}
+                {%- if local_port[1] == port_name %}
+                    {%- set roles3 = switch_role + '_' + 'server' %}
+                    {%- set roles3 = roles3 | lower %}
+                    {%- if roles3 in ports2cable %}
+                        {%- if cable_len.append(ports2cable[roles3]) %}{% endif %}
+                    {%- endif %}
+                {%- endif %}
+            {%- endfor %}
+            {%- if cable_len -%}
+                {{ cable_len.0 }}
+            {%- else -%}
+                {{ default_cable }}
+            {%- endif %}
+        {%- else -%}
+            {{ default_cable }}
+        {%- endif %}
+    {%- endif %}
+{%- endmacro %}
+
+{%- if DEVICE_METADATA is defined %}
+{%- set switch_role = DEVICE_METADATA['localhost']['type'] %}
+{%- endif -%}
+
+{% set port_names_list = [] %}
+{% for port in PORT %}
+    {%- if port_names_list.append(port) %}{% endif %}
+{% endfor %}
+{% set port_names = port_names_list | join(',') -%}
+
+{
+    "CABLE_LENGTH": {
+        "AZURE": {
+    {% for port in PORT %}
+        {% set cable = cable_length(port) -%}
+        "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %}
+
+    {% endfor %}
+    }
+    },
+    "BUFFER_POOL": {
+        "ingress_lossless_pool": {
+            "size": "51691264",
+            "type": "ingress",
+            "mode": "dynamic",
+            "xoff": "17708800"
+        },
+        "lossy_pool": {
+            "size": "18874368",
+            "type": "egress",
+            "mode": "dynamic",
+            "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "70565632",
+            "type": "egress",
+            "mode": "static"
+        }
+    },
+    "BUFFER_PROFILE": {
+        "ingress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "xoff":"38816",
+            "size":"1518",
+            "dynamic_th":"1",
+            "xon_offset":"9408"
+        },
+        "egress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "size":"0",
+            "static_th":"10243072"
+        },
+        "ingress_lossy_profile": {
+            "pool":"lossy_pool",
+            "size":"0",
+            "static_th":"10243072"
+        },
+        "egress_lossy_profile": {
+            "pool":"lossy_pool",
+            "size":"1518",
+            "dynamic_th":"2"
+        }
+    },
+    "BUFFER_PG": {
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    },
+
+    "BUFFER_QUEUE": {
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers_defaults_def_lossy.j2
new file mode 100644
index 000000000000..79dbf9b2864b
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers_defaults_def_lossy.j2
@@ -0,0 +1,42 @@
+{% set port_names_list = [] %}
+{% for port in PORT %}
+    {%- if port_names_list.append(port) %}{% endif %}
+{% endfor %}
+{% set port_names = port_names_list | join(',') -%}
+
+{
+    "BUFFER_POOL": {
+        "lossy_pool": {
+            "size": "61458432",
+            "type": "egress",
+            "mode": "dynamic",
+            "xoff": "0"
+        }
+    },
+    "BUFFER_PROFILE": {
+        "ingress_lossy_profile": {
+            "pool":"lossy_pool",
+            "size":"0",
+            "static_th":"10243072"
+        },
+        "egress_lossy_profile": {
+            "pool":"lossy_pool",
+            "size":"1518",
+            "dynamic_th":"2"
+        }
+    },
+    "BUFFER_PG": {
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "ingress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
+    },
+    "BUFFER_QUEUE": {
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers_defaults_t1.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers_defaults_t1.j2
new file mode 100644
index 000000000000..020656fdb8f5
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/buffers_defaults_t1.j2
@@ -0,0 +1,162 @@
+{# Default values which will be used if no actual configura available #}
+{% set default_cable = '40m' %}
+
+{# Port configuration to cable length look-up table #}
+{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #}
+{# Roles described in the minigraph #}
+{% set ports2cable = {
+        'torrouter_server'       : '5m',
+        'leafrouter_torrouter'   : '40m',
+        'spinerouter_leafrouter' : '300m'
+        }
+%}
+
+{%- macro cable_length(port_name) %}
+    {%- set cable_len = [] %}
+    {%- for local_port in DEVICE_NEIGHBOR %}
+        {%- if local_port == port_name %}
+            {%- if DEVICE_NEIGHBOR_METADATA is defined and DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor_role = neighbor.type %}
+                {%- set roles1 = switch_role + '_' + neighbor_role %}
+                {%- set roles2 = neighbor_role + '_' + switch_role %}
+                {%- set roles1 = roles1 | lower %}
+                {%- set roles2 = roles2 | lower %}
+                {%- if roles1 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles1]) %}{% endif %}
+                {%- elif roles2 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles2]) %}{% endif %}
+                {%- endif %}
+            {%- endif %}
+        {%- endif %}
+    {%- endfor %}
+    {%- if cable_len -%}
+        {{ cable_len.0 }}
+    {%- else %}
+        {%- if switch_role.lower() == 'torrouter' %}
+            {%- for local_port in VLAN_MEMBER %}
+                {%- if local_port[1] == port_name %}
+                    {%- set roles3 = switch_role + '_' + 'server' %}
+                    {%- set roles3 = roles3 | lower %}
+                    {%- if roles3 in ports2cable %}
+                        {%- if cable_len.append(ports2cable[roles3]) %}{% endif %}
+                    {%- endif %}
+                {%- endif %}
+            {%- endfor %}
+            {%- if cable_len -%}
+                {{ cable_len.0 }}
+            {%- else -%}
+                {{ default_cable }}
+            {%- endif %}
+        {%- else -%}
+            {{ default_cable }}
+        {%- endif %}
+    {%- endif %}
+{%- endmacro %}
+
+{%- if DEVICE_METADATA is defined %}
+{%- set switch_role = DEVICE_METADATA['localhost']['type'] %}
+{%- endif -%}
+
+{% set port_names_list = [] %}
+{% for port in PORT %}
+    {%- if port_names_list.append(port) %}{% endif %}
+{% endfor %}
+{% set port_names = port_names_list | join(',') -%}
+
+{
+    "CABLE_LENGTH": {
+        "AZURE": {
+    {% for port in PORT %}
+        {% set cable = cable_length(port) -%}
+        "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %}
+
+    {% endfor %}
+    }
+    },
+    "BUFFER_POOL": {
+        "ingress_lossless_pool": {
+            "size": "51691264",
+            "type": "ingress",
+            "mode": "dynamic",
+            "xoff": "17708800"
+        },
+        "lossy_pool": {
+            "size": "18874368",
+            "type": "egress",
+            "mode": "dynamic",
+            "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "70565632",
+            "type": "egress",
+            "mode": "static"
+        }
+    },
+    "BUFFER_PROFILE": {
+        "ingress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "xoff":"38816",
+            "size":"1518",
+            "dynamic_th":"1",
+            "xon_offset":"9408"
+        },
+        "egress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "size":"0",
+            "static_th":"10243072"
+        },
+        "ingress_lossy_profile": {
+            "pool":"lossy_pool",
+            "size":"0",
+            "static_th":"10243072"
+        },
+        "egress_lossy_profile": {
+            "pool":"lossy_pool",
+            "size":"1518",
+            "dynamic_th":"2"
+        }
+    },
+    "BUFFER_PG": {
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    },
+
+    "BUFFER_QUEUE": {
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/hwsku.json b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/hwsku.json
new file mode 100644
index 000000000000..4116ae2ba5f1
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/hwsku.json
@@ -0,0 +1,132 @@
+{
+    "interfaces": {
+        "Ethernet0": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet8": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet16": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet24": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet32": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet40": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet48": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet56": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet64": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet72": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet80": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet88": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet96": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet104": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet112": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet120": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet128": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet136": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet144": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet152": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet160": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet168": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet176": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet184": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet192": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet200": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet208": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet216": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet224": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet232": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet240": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet248": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/innovium.77700_A b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/innovium.77700_A
new file mode 100644
index 000000000000..ec13307805e1
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/innovium.77700_A
@@ -0,0 +1,60 @@
+sku:               innovium.77700_A
+
+device_id:         0x1b58
+
+# Hardware constraint information
+hardware:
+        num_ibs:           6
+        ib_active:         0,1,2,3,4,5
+
+        ports_per_ib:      32, 32, 32, 32, 20, 20
+        recirc_port_num:   32, 32, 32, 32, 32, 32
+        cpu_port_num:      33
+        cpu_port_ib:       0
+        mgmt_port_num:     33
+        mgmt_port_ibs:     1,2
+
+        pics_per_ib:       6, 7, 6, 5, 5, 5
+        pic_ports_per_pic: 8
+        max_serdes_speed:  50
+
+        num_shared_pics: 2
+
+        isg [0-4]:
+            ib: 0
+            pic_id: [0-4]
+
+        isg [5-9]:
+            ib: 5
+            pic_id: [0-4]
+
+        isg [10-14]:
+            ib: 1
+            pic_id: [0-4]
+
+        isg [16-20]:
+            ib: 3
+            pic_id: [0-4]
+
+        isg [21-25]:
+            ib: 4
+            pic_id: [0-4]
+
+        isg [26-30]:
+            ib: 2
+            pic_id: [0-4]
+
+        isg 15:
+            mode: 8:0
+            ib: 1
+            pic_id: 5
+
+        isg 31:
+            mode: 8:0
+            ib: 0
+            pic_id: 5
+
+        isg 32:
+            mode: 1:1
+            ib: 1, 2
+            pic_id: 6
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/innovium.77700_B b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/innovium.77700_B
new file mode 100644
index 000000000000..57ba52cbc3bc
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/innovium.77700_B
@@ -0,0 +1,60 @@
+sku:               innovium.77700_B
+
+device_id:         0x1b58
+
+# Hardware constraint information
+hardware:
+        num_ibs:           6
+        ib_active:         0,1,2,3,4,5
+
+        ports_per_ib:      32, 32, 32, 32, 20, 20
+        recirc_port_num:   32, 32, 32, 32, 32, 32
+        cpu_port_num:      33
+        cpu_port_ib:       0
+        mgmt_port_num:     33
+        mgmt_port_ibs:     1,2
+
+        pics_per_ib:       6, 7, 7, 6, 5, 5
+        pic_ports_per_pic: 8
+        max_serdes_speed:  50
+
+        num_shared_pics: 2
+
+        isg [0-4]:
+            ib: 0
+            pic_id: [0-4]
+
+        isg [5-9]:
+            ib: 5
+            pic_id: [0-4]
+
+        isg [10-14]:
+            ib: 1
+            pic_id: [0-4]
+
+        isg [16-20]:
+            ib: 3
+            pic_id: [0-4]
+
+        isg [21-25]:
+            ib: 4
+            pic_id: [0-4]
+
+        isg [26-30]:
+            ib: 2
+            pic_id: [0-4]
+
+        isg 15:
+            mode: 4:4
+            ib: 1, 3
+            pic_id: 5
+
+        isg 31:
+            mode: 4:4
+            ib: 0, 2
+            pic_id: 5
+
+        isg 32:
+            mode: 1:1
+            ib: 1, 2
+            pic_id: 6
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/ivm.sai.config.yaml b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/ivm.sai.config.yaml
new file mode 100644
index 000000000000..1f90f4de88dd
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/ivm.sai.config.yaml
@@ -0,0 +1,9 @@
+IFCS_INIT_FILE : "/usr/share/sonic/hwsku/6512-32_32x100G.config.yaml"
+IFCS_SKU_FILE : "/usr/share/sonic/hwsku/innovium.77700_A"
+IFCS_INNO_CLI_PORT : "9999"
+IFCS_TARGET : "device"
+INNOVIUM_DIR : "/innovium"
+PLATFORM_LIBRARY: "/usr/share/sonic/platform/lib_ivm_serdes_pltfm.so"
+PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes:$INNOVIUM_DIR/ifcs_cmds:$INNOVIUM_DIR/testutil"
+IVM_SAI_DATAPATH_CONFIG_FILE: "/usr/share/sonic/hwsku/ivm.sai.datapath.config.yaml"
+IVM_SAI_PARAM_A0008: "32"
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/ivm.sai.datapath.config.yaml b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/ivm.sai.datapath.config.yaml
new file mode 100644
index 000000000000..891b0b3e2834
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/ivm.sai.datapath.config.yaml
@@ -0,0 +1,9 @@
+ISAI_PARAM_P0_0_LS : "4608 4608 4608 4608 2880 2880"
+ISAI_PARAM_P0_1_LS : "2226 1946 1946 1890 1218 1218"
+ISAI_PARAM_P0_1_ALS : "434 154 154 98 98 98"
+ISAI_PARAM_P1_0_LS : "1536 1536 1536 1536 960 960"
+ISAI_PARAM_P1_0_LL : "3072 3072 3072 3072 1920 1920"
+ISAI_PARAM_P1_1_LS : "1778 1498 1498 1442 938 938"
+ISAI_PARAM_P1_1_LL : "2478 2478 2478 2478 2478 2478"
+ISAI_PARAM_P1_1_ALS : "434 154 154 98 98 98"
+ISAI_PARAM_P1_1_ALL : "126 126 126 126 126 126"
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/pg_profile_lookup.ini b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/pg_profile_lookup.ini
new file mode 100644
index 000000000000..0d881737cfa1
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/pg_profile_lookup.ini
@@ -0,0 +1,22 @@
+# PG lossless profiles.
+# speed   cable size  xon  xoff  threshold xon_offset
+  25000   5m    1518  0    15680   1       9408
+  50000   5m    1518  0    21248   1       9408
+  100000  5m    1518  0    34624   1       9408
+  200000  5m    1518  0    62368   1       9408
+  400000  5m    1518  0    117536  1       9408
+  25000   40m   1518  0    16928   1       9408
+  50000   40m   1518  0    23392   1       9408
+  100000  40m   1518  0    38816   1       9408
+  200000  40m   1518  0    71904   1       9408
+  400000  40m   1518  0    135520  1       9408
+  25000   100m  1518  0    18848   1       9408
+  50000   100m  1518  0    27264   1       9408
+  100000  100m  1518  0    46496   1       9408
+  200000  100m  1518  0    87168   1       9408
+  400000  100m  1518  0    166688  1       9408
+  25000   300m  1518  0    25184   1       9408
+  50000   300m  1518  0    40128   1       9408
+  100000  300m  1518  0    72384   1       9408
+  200000  300m  1518  0    138112  1       9408
+  400000  300m  1518  0    268640  1       9408
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/port_config.ini b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/port_config.ini
new file mode 100644
index 000000000000..9507616bd5c2
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/port_config.ini
@@ -0,0 +1,33 @@
+# name              lanes               alias       speed       index   mtu      fec
+Ethernet0           89,90,91,92         Eth1        100000      0       9126     rs
+Ethernet8           81,82,83,84         Eth2        100000      1       9126     rs
+Ethernet16          73,74,75,76         Eth3        100000      2       9126     rs
+Ethernet24          65,66,67,68         Eth4        100000      3       9126     rs
+Ethernet32          57,58,59,60         Eth5        100000      4       9126     rs
+Ethernet40          49,50,51,52         Eth6        100000      5       9126     rs
+Ethernet48          41,42,43,44         Eth7        100000      6       9126     rs
+Ethernet56          33,34,35,36         Eth8        100000      7       9126     rs
+Ethernet64          153,154,155,156     Eth9        100000      8       9126     rs
+Ethernet72          145,146,147,148     Eth10       100000      9       9126     rs
+Ethernet80          137,138,139,140     Eth11       100000      10      9126     rs
+Ethernet88          129,130,131,132     Eth12       100000      11      9126     rs
+Ethernet96          121,122,123,124     Eth13       100000      12      9126     rs
+Ethernet104         113,114,115,116     Eth14       100000      13      9126     rs
+Ethernet112         105,106,107,108     Eth15       100000      14      9126     rs
+Ethernet120         97,98,99,100        Eth16       100000      15      9126     rs
+Ethernet128         209,210,211,212     Eth17       100000      16      9126     rs
+Ethernet136         217,218,219,220     Eth18       100000      17      9126     rs
+Ethernet144         193,194,195,196     Eth19       100000      18      9126     rs
+Ethernet152         201,202,203,204     Eth20       100000      19      9126     rs
+Ethernet160         177,178,179,180     Eth21       100000      20      9126     rs
+Ethernet168         185,186,187,188     Eth22       100000      21      9126     rs
+Ethernet176         161,162,163,164     Eth23       100000      22      9126     rs
+Ethernet184         169,170,171,172     Eth24       100000      23      9126     rs
+Ethernet192         17,18,19,20         Eth25       100000      24      9126     rs
+Ethernet200         25,26,27,28         Eth26       100000      25      9126     rs
+Ethernet208         1,2,3,4             Eth27       100000      26      9126     rs
+Ethernet216         9,10,11,12          Eth28       100000      27      9126     rs
+Ethernet224         241,242,243,244     Eth29       100000      28      9126     rs
+Ethernet232         249,250,251,252     Eth30       100000      29      9126     rs
+Ethernet240         225,226,227,228     Eth31       100000      30      9126     rs
+Ethernet248         233,234,235,236     Eth32       100000      31      9126     rs
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos.json.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos.json.j2
new file mode 100644
index 000000000000..b03078465730
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos.json.j2
@@ -0,0 +1,129 @@
+{% set port_names_list = [] %}
+{% for port in PORT %}
+    {%- if port_names_list.append(port) %}{% endif %}
+{% endfor %}
+{% set port_names = port_names_list | join(',') -%}
+
+
+{
+   "TC_TO_QUEUE_MAP":{
+        "AZURE":{
+            "0":"0",
+            "1":"1",
+            "2":"2",
+            "3":"3",
+            "4":"4",
+            "5":"5",
+            "6":"6",
+            "7":"7"
+        }
+    },
+    "TC_TO_PRIORITY_GROUP_MAP": {
+    "AZURE": {
+        "0": "0",
+        "1": "0",
+        "2": "0",
+        "3": "3",
+        "4": "4",
+        "5": "0",
+        "6": "0",
+        "7": "0"
+    }
+    },
+       "DSCP_TO_TC_MAP": {
+        "AZURE": {
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
+        }
+    },
+    "PORT_QOS_MAP": {
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_enable": "3,4"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    },
+    "WRED_PROFILE": {
+        "AZURE_LOSSLESS" : {
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos_defaults_def_lossy.j2
new file mode 100644
index 000000000000..c1170619bc6c
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos_defaults_def_lossy.j2
@@ -0,0 +1,121 @@
+{% set port_names_list = [] %}
+{% for port in PORT %}
+    {%- if port_names_list.append(port) %}{% endif %}
+{% endfor %}
+{% set port_names = port_names_list | join(',') -%}
+
+
+{
+   "TC_TO_QUEUE_MAP":{
+        "AZURE":{
+            "0":"0",
+            "1":"1",
+            "2":"2",
+            "3":"3",
+            "4":"4",
+            "5":"5",
+            "6":"6",
+            "7":"7"
+        }
+    },
+    "TC_TO_PRIORITY_GROUP_MAP": {
+    "AZURE": {
+        "0": "0",
+        "1": "0",
+        "2": "0",
+        "3": "1",
+        "4": "2",
+        "5": "0",
+        "6": "0",
+        "7": "0"
+    }
+    },
+       "DSCP_TO_TC_MAP": {
+        "AZURE": {
+            "0":"0",
+            "1":"0",
+            "2":"0",
+            "3":"0",
+            "4":"0",
+            "5":"0",
+            "6":"0",
+            "7":"0",
+            "8":"0",
+            "9":"0",
+            "10":"0",
+            "11":"0",
+            "12":"0",
+            "13":"0",
+            "14":"0",
+            "15":"0",
+            "16":"0",
+            "17":"0",
+            "18":"0",
+            "19":"0",
+            "20":"0",
+            "21":"0",
+            "22":"0",
+            "23":"0",
+            "24":"0",
+            "25":"0",
+            "26":"0",
+            "27":"0",
+            "28":"0",
+            "29":"0",
+            "30":"0",
+            "31":"0",
+            "32":"0",
+            "33":"0",
+            "34":"0",
+            "35":"0",
+            "36":"0",
+            "37":"0",
+            "38":"0",
+            "39":"0",
+            "40":"0",
+            "41":"0",
+            "42":"0",
+            "43":"0",
+            "44":"0",
+            "45":"0",
+            "46":"0",
+            "47":"0",
+            "48":"0",
+            "49":"0",
+            "50":"0",
+            "51":"0",
+            "52":"0",
+            "53":"0",
+            "54":"0",
+            "55":"0",
+            "56":"0",
+            "57":"0",
+            "58":"0",
+            "59":"0",
+            "60":"0",
+            "61":"0",
+            "62":"0",
+            "63":"0"
+        }
+    },
+    "PORT_QOS_MAP": {
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    },
+    "SCHEDULER": {
+        "scheduler.7": {
+            "type": "STRICT"
+        }
+    },
+    "QUEUE": {
+        "{{ port_names }}|7": {
+            "scheduler": "[SCHEDULER|scheduler.7]"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos_defaults_t1.j2 b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos_defaults_t1.j2
new file mode 100644
index 000000000000..b03078465730
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/qos_defaults_t1.j2
@@ -0,0 +1,129 @@
+{% set port_names_list = [] %}
+{% for port in PORT %}
+    {%- if port_names_list.append(port) %}{% endif %}
+{% endfor %}
+{% set port_names = port_names_list | join(',') -%}
+
+
+{
+   "TC_TO_QUEUE_MAP":{
+        "AZURE":{
+            "0":"0",
+            "1":"1",
+            "2":"2",
+            "3":"3",
+            "4":"4",
+            "5":"5",
+            "6":"6",
+            "7":"7"
+        }
+    },
+    "TC_TO_PRIORITY_GROUP_MAP": {
+    "AZURE": {
+        "0": "0",
+        "1": "0",
+        "2": "0",
+        "3": "3",
+        "4": "4",
+        "5": "0",
+        "6": "0",
+        "7": "0"
+    }
+    },
+       "DSCP_TO_TC_MAP": {
+        "AZURE": {
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
+        }
+    },
+    "PORT_QOS_MAP": {
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_enable": "3,4"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    },
+    "WRED_PROFILE": {
+        "AZURE_LOSSLESS" : {
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/sai.profile b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/sai.profile
new file mode 100644
index 000000000000..aba4fc81fb17
--- /dev/null
+++ b/device/wistron/x86_64-wistron_6512_32r-r0/wistron_6512_32r_32x100/sai.profile
@@ -0,0 +1 @@
+SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/ivm.sai.config.yaml
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers.json.j2
index 1a31812c26b1..b9265c62eb8f 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers.json.j2
@@ -1,3 +1,63 @@
+{# Default values which will be used if no actual configuration available #}
+{% set default_cable = '40m' %}
+
+{# Port configuration to cable length look-up table #}
+{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #}
+{# Roles described in the minigraph #}
+{% set ports2cable = {
+        'torrouter_server'       : '5m',
+        'leafrouter_torrouter'   : '40m',
+        'spinerouter_leafrouter' : '300m'
+        }
+%}
+
+{%- macro cable_length(port_name) %}
+    {%- set cable_len = [] %}
+    {%- for local_port in DEVICE_NEIGHBOR %}
+        {%- if local_port == port_name %}
+            {%- if DEVICE_NEIGHBOR_METADATA is defined and DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor_role = neighbor.type %}
+                {%- set roles1 = switch_role + '_' + neighbor_role %}
+                {%- set roles2 = neighbor_role + '_' + switch_role %}
+                {%- set roles1 = roles1 | lower %}
+                {%- set roles2 = roles2 | lower %}
+                {%- if roles1 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles1]) %}{% endif %}
+                {%- elif roles2 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles2]) %}{% endif %}
+                {%- endif %}
+            {%- endif %}
+        {%- endif %}
+    {%- endfor %}
+    {%- if cable_len -%}
+        {{ cable_len.0 }}
+    {%- else %}
+        {%- if switch_role.lower() == 'torrouter' %}
+            {%- for local_port in VLAN_MEMBER %}
+                {%- if local_port[1] == port_name %}
+                    {%- set roles3 = switch_role + '_' + 'server' %}
+                    {%- set roles3 = roles3 | lower %}
+                    {%- if roles3 in ports2cable %}
+                        {%- if cable_len.append(ports2cable[roles3]) %}{% endif %}
+                    {%- endif %}
+                {%- endif %}
+            {%- endfor %}
+            {%- if cable_len -%}
+                {{ cable_len.0 }}
+            {%- else -%}
+                {{ default_cable }}
+            {%- endif %}
+        {%- else -%}
+            {{ default_cable }}
+        {%- endif %}
+    {%- endif %}
+{%- endmacro %}
+
+{%- if DEVICE_METADATA is defined %}
+{%- set switch_role = DEVICE_METADATA['localhost']['type'] %}
+{%- endif -%}
+
 {% set port_names_list = [] %}
 {% for port in PORT %}
     {%- if port_names_list.append(port) %}{% endif %}
@@ -5,34 +65,98 @@
 {% set port_names = port_names_list | join(',') -%}
 
 {
+    "CABLE_LENGTH": {
+        "AZURE": {
+    {% for port in PORT %}
+        {% set cable = cable_length(port) -%}
+        "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %}
+
+    {% endfor %}
+    }
+    },
     "BUFFER_POOL": {
+        "ingress_lossless_pool": {
+            "size": "51691264",
+            "type": "ingress",
+            "mode": "dynamic",
+            "xoff": "17708800"
+        },
         "lossy_pool": {
-            "size": "56985600",
+            "size": "18874368",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "70565632",
+            "type": "egress",
+            "mode": "static"
         }
     },
     "BUFFER_PROFILE": {
+        "ingress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "xoff":"135520",
+            "size":"1518",
+            "dynamic_th":"1",
+            "xon_offset":"9408"
+        },
+        "egress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "size":"0",
+            "static_th":"10243072"
+        },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers_defaults_def_lossy.j2
index 1a31812c26b1..79dbf9b2864b 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers_defaults_def_lossy.j2
@@ -7,7 +7,7 @@
 {
     "BUFFER_POOL": {
         "lossy_pool": {
-            "size": "56985600",
+            "size": "61458432",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
@@ -15,24 +15,28 @@
     },
     "BUFFER_PROFILE": {
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "ingress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     },
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers_defaults_t1.j2
index 93dac6b1992a..b9265c62eb8f 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/buffers_defaults_t1.j2
@@ -1,4 +1,4 @@
-{# Default values which will be used if no actual configura available #}
+{# Default values which will be used if no actual configuration available #}
 {% set default_cable = '40m' %}
 
 {# Port configuration to cable length look-up table #}
@@ -76,7 +76,7 @@
     },
     "BUFFER_POOL": {
         "ingress_lossless_pool": {
-            "size": "47218432",
+            "size": "51691264",
             "type": "ingress",
             "mode": "dynamic",
             "xoff": "17708800"
@@ -86,52 +86,77 @@
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "70565632",
+            "type": "egress",
+            "mode": "static"
         }
     },
     "BUFFER_PROFILE": {
         "ingress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
-            "xoff":"38816",
+            "pool":"ingress_lossless_pool",
+            "xoff":"135520",
             "size":"1518",
             "dynamic_th":"1",
-            "xon_offset":"13440"
+            "xon_offset":"9408"
         },
         "egress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        },
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]"
-        },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|egress_lossless_profile]"
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
         },
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
         },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/config_32x400G_wistron_sw_to3200k.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/config_32x400G_wistron_sw_to3200k.yaml
index 23445c6dede5..b96146517adb 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/config_32x400G_wistron_sw_to3200k.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/config_32x400G_wistron_sw_to3200k.yaml
@@ -10,13 +10,11 @@ nodes:
     - auto_create: "no"
       multi_interface: "yes"
     buffer_management_mode: "api_driven"
+    wred_cr_ip_proto_list: "17"
+    cr_assignment_mode: "1"
     max_lossless_tc: "2"
     ilpm_enable: "1"
     forward_profile: "IFCS_FORWARD_PROFILE_ID_PROFILE_E"
-    ecn_stats_enable: "1"
-    pcie_attn: "10, 0, 0, 0"
-    pcie_post: "10, 18, 18, 18"
-    pcie_pre1: "0, 0, 0, 0"
     led_cfg_sck_rate: "0x5"
     led_refresh_precliff_timer: "0x18eec2"
     led_refresh_cliff_timer: "0x15e"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/hwsku.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/hwsku.json
new file mode 100644
index 000000000000..7157f361663e
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/hwsku.json
@@ -0,0 +1,132 @@
+{
+    "interfaces": {
+        "Ethernet0": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet8": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet16": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet24": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet32": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet40": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet48": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet56": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet64": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet72": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet80": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet88": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet96": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet104": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet112": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet120": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet128": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet136": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet144": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet152": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet160": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet168": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet176": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet184": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet192": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet200": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet208": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet216": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet224": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet232": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet240": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet248": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/innovium.77700_A b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/innovium.77700_A
index 84aa41983606..ec13307805e1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/innovium.77700_A
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/innovium.77700_A
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/innovium.77700_B b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/innovium.77700_B
index 27297b313959..57ba52cbc3bc 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/innovium.77700_B
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/innovium.77700_B
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/ivm.sai.config.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/ivm.sai.config.yaml
old mode 100644
new mode 100755
index 0c1644ab7d72..ed98d89bfac6
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/ivm.sai.config.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/ivm.sai.config.yaml
@@ -3,7 +3,7 @@ IFCS_SKU_FILE : "/usr/share/sonic/hwsku/innovium.77700_A"
 IFCS_INNO_CLI_PORT : "9999"
 IFCS_TARGET : "device"
 INNOVIUM_DIR : "/innovium"
-PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes"
+PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes:$INNOVIUM_DIR/ifcs_cmds:$INNOVIUM_DIR/testutil"
 PLATFORM_LIBRARY: "/usr/share/sonic/platform/lib_ivm_serdes_pltfm.so"
 IVM_SAI_DATAPATH_CONFIG_FILE: "/usr/share/sonic/hwsku/ivm.sai.datapath.config.yaml"
 IVM_SAI_PARAM_A0008: "32"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/ivm.sai.datapath.config.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/ivm.sai.datapath.config.yaml
index 891b0b3e2834..a539d6c70040 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/ivm.sai.datapath.config.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/ivm.sai.datapath.config.yaml
@@ -1,9 +1,9 @@
-ISAI_PARAM_P0_0_LS : "4608 4608 4608 4608 2880 2880"
-ISAI_PARAM_P0_1_LS : "2226 1946 1946 1890 1218 1218"
+ISAI_PARAM_P0_0_LS : "864 864 720 720 720 720"
+ISAI_PARAM_P0_1_LS : "770 490 434 378 378 378"
 ISAI_PARAM_P0_1_ALS : "434 154 154 98 98 98"
-ISAI_PARAM_P1_0_LS : "1536 1536 1536 1536 960 960"
-ISAI_PARAM_P1_0_LL : "3072 3072 3072 3072 1920 1920"
-ISAI_PARAM_P1_1_LS : "1778 1498 1498 1442 938 938"
-ISAI_PARAM_P1_1_LL : "2478 2478 2478 2478 2478 2478"
+ISAI_PARAM_P1_0_LS : "288 288 240 240 240 240"
+ISAI_PARAM_P1_0_LL : "576 576 480 480 480 480"
+ISAI_PARAM_P1_1_LS : "686 406 364 308 308 308"
+ISAI_PARAM_P1_1_LL : "574 574 574 574 574 574"
 ISAI_PARAM_P1_1_ALS : "434 154 154 98 98 98"
 ISAI_PARAM_P1_1_ALL : "126 126 126 126 126 126"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/pg_profile_lookup.ini b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/pg_profile_lookup.ini
index adcb52ab2a29..0d881737cfa1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/pg_profile_lookup.ini
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/pg_profile_lookup.ini
@@ -1,18 +1,22 @@
 # PG lossless profiles.
 # speed   cable size  xon  xoff  threshold xon_offset
-  25000   5m    1518  0    15680   1       13440
-  50000   5m    1518  0    21248   1       13440
-  100000  5m    1518  0    34624   1       13440
-  400000  5m    1518  0    117536  1       13440
-  25000   40m   1518  0    16928   1       13440
-  50000   40m   1518  0    23392   1       13440
-  100000  40m   1518  0    38816   1       13440
-  400000  40m   1518  0    135520  1       13440
-  25000   100m  1518  0    18848   1       13440
-  50000   100m  1518  0    27264   1       13440
-  100000  100m  1518  0    46496   1       13440
-  400000  100m  1518  0    166688  1       13440
-  25000   300m  1518  0    25184   1       13440
-  50000   300m  1518  0    40128   1       13440
-  100000  300m  1518  0    72384   1       13440
-  400000  300m  1518  0    268640  1       13440
+  25000   5m    1518  0    15680   1       9408
+  50000   5m    1518  0    21248   1       9408
+  100000  5m    1518  0    34624   1       9408
+  200000  5m    1518  0    62368   1       9408
+  400000  5m    1518  0    117536  1       9408
+  25000   40m   1518  0    16928   1       9408
+  50000   40m   1518  0    23392   1       9408
+  100000  40m   1518  0    38816   1       9408
+  200000  40m   1518  0    71904   1       9408
+  400000  40m   1518  0    135520  1       9408
+  25000   100m  1518  0    18848   1       9408
+  50000   100m  1518  0    27264   1       9408
+  100000  100m  1518  0    46496   1       9408
+  200000  100m  1518  0    87168   1       9408
+  400000  100m  1518  0    166688  1       9408
+  25000   300m  1518  0    25184   1       9408
+  50000   300m  1518  0    40128   1       9408
+  100000  300m  1518  0    72384   1       9408
+  200000  300m  1518  0    138112  1       9408
+  400000  300m  1518  0    268640  1       9408
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos.json.j2
old mode 100644
new mode 100755
index 104d2d78de87..0f1ecd1106d0
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos.json.j2
@@ -18,6 +18,18 @@
             "7":"7"
         }
     },
+    "MAP_PFC_PRIORITY_TO_QUEUE": {
+        "AZURE": {
+            "0": "0",
+            "1": "1",
+            "2": "2",
+            "3": "3",
+            "4": "4",
+            "5": "5",
+            "6": "6",
+            "7": "7"
+        }
+    },
     "TC_TO_PRIORITY_GROUP_MAP": {
     "AZURE": {
         "0": "0",
@@ -32,87 +44,149 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"0",
-            "4":"0",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"0",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
-        }
-    },
-    "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "SCHEDULER": {
-        "scheduler.7": {
-            "type": "STRICT"
+        "scheduler.0": {
+            "type"  : "DWRR",
+            "weight": "1"
+        },
+        "scheduler.1": {
+            "type"  : "DWRR",
+            "weight": "1"
         }
     },
     "QUEUE": {
-        "{{ port_names }}|7": {
-            "scheduler": "[SCHEDULER|scheduler.7]"
+{% for port in port_names_list %}
+        "{{ port }}|3": {
+            "scheduler"   : "scheduler.1",
+            "wred_profile"  : "AZURE_LOSSLESS"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|4": {
+            "scheduler"   : "scheduler.1",
+            "wred_profile"  : "AZURE_LOSSLESS"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0": {
+            "scheduler": "scheduler.0"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|1": {
+            "scheduler": "scheduler.0"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|2": {
+            "scheduler": "scheduler.0"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5": {
+            "scheduler": "scheduler.0"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|6": {
+            "scheduler": "scheduler.0"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    },
+    "PORT_QOS_MAP": {
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_to_queue_map": "AZURE",
+            "pfc_enable": "3,4"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    },
+    "WRED_PROFILE": {
+        "AZURE_LOSSLESS" : {
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos_defaults_def_lossy.j2
old mode 100644
new mode 100755
index 104d2d78de87..c1170619bc6c
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos_defaults_def_lossy.j2
@@ -23,8 +23,8 @@
         "0": "0",
         "1": "0",
         "2": "0",
-        "3": "3",
-        "4": "4",
+        "3": "1",
+        "4": "2",
         "5": "0",
         "6": "0",
         "7": "0"
@@ -99,11 +99,14 @@
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "SCHEDULER": {
         "scheduler.7": {
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos_defaults_t1.j2
old mode 100644
new mode 100755
index 4b9748c7b594..0f1ecd1106d0
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k/qos_defaults_t1.j2
@@ -18,6 +18,18 @@
             "7":"7"
         }
     },
+    "MAP_PFC_PRIORITY_TO_QUEUE": {
+        "AZURE": {
+            "0": "0",
+            "1": "1",
+            "2": "2",
+            "3": "3",
+            "4": "4",
+            "5": "5",
+            "6": "6",
+            "7": "7"
+        }
+    },
     "TC_TO_PRIORITY_GROUP_MAP": {
     "AZURE": {
         "0": "0",
@@ -32,83 +44,149 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"3",
-            "4":"4",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"1",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
+        }
+    },
+    "SCHEDULER": {
+        "scheduler.0": {
+            "type"  : "DWRR",
+            "weight": "1"
+        },
+        "scheduler.1": {
+            "type"  : "DWRR",
+            "weight": "1"
         }
     },
+    "QUEUE": {
+{% for port in port_names_list %}
+        "{{ port }}|3": {
+            "scheduler"   : "scheduler.1",
+            "wred_profile"  : "AZURE_LOSSLESS"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|4": {
+            "scheduler"   : "scheduler.1",
+            "wred_profile"  : "AZURE_LOSSLESS"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0": {
+            "scheduler": "scheduler.0"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|1": {
+            "scheduler": "scheduler.0"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|2": {
+            "scheduler": "scheduler.0"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5": {
+            "scheduler": "scheduler.0"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|6": {
+            "scheduler": "scheduler.0"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
+    },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_to_queue_map": "AZURE",
             "pfc_enable": "3,4"
-        }
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "WRED_PROFILE": {
         "AZURE_LOSSLESS" : {
-            "red_min_threshold":"50000"
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers.json.j2
index 1a31812c26b1..794b5c854689 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers.json.j2
@@ -1,3 +1,63 @@
+{# Default values which will be used if no actual configura available #}
+{% set default_cable = '40m' %}
+
+{# Port configuration to cable length look-up table #}
+{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #}
+{# Roles described in the minigraph #}
+{% set ports2cable = {
+        'torrouter_server'       : '5m',
+        'leafrouter_torrouter'   : '40m',
+        'spinerouter_leafrouter' : '300m'
+        }
+%}
+
+{%- macro cable_length(port_name) %}
+    {%- set cable_len = [] %}
+    {%- for local_port in DEVICE_NEIGHBOR %}
+        {%- if local_port == port_name %}
+            {%- if DEVICE_NEIGHBOR_METADATA is defined and DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor_role = neighbor.type %}
+                {%- set roles1 = switch_role + '_' + neighbor_role %}
+                {%- set roles2 = neighbor_role + '_' + switch_role %}
+                {%- set roles1 = roles1 | lower %}
+                {%- set roles2 = roles2 | lower %}
+                {%- if roles1 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles1]) %}{% endif %}
+                {%- elif roles2 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles2]) %}{% endif %}
+                {%- endif %}
+            {%- endif %}
+        {%- endif %}
+    {%- endfor %}
+    {%- if cable_len -%}
+        {{ cable_len.0 }}
+    {%- else %}
+        {%- if switch_role.lower() == 'torrouter' %}
+            {%- for local_port in VLAN_MEMBER %}
+                {%- if local_port[1] == port_name %}
+                    {%- set roles3 = switch_role + '_' + 'server' %}
+                    {%- set roles3 = roles3 | lower %}
+                    {%- if roles3 in ports2cable %}
+                        {%- if cable_len.append(ports2cable[roles3]) %}{% endif %}
+                    {%- endif %}
+                {%- endif %}
+            {%- endfor %}
+            {%- if cable_len -%}
+                {{ cable_len.0 }}
+            {%- else -%}
+                {{ default_cable }}
+            {%- endif %}
+        {%- else -%}
+            {{ default_cable }}
+        {%- endif %}
+    {%- endif %}
+{%- endmacro %}
+
+{%- if DEVICE_METADATA is defined %}
+{%- set switch_role = DEVICE_METADATA['localhost']['type'] %}
+{%- endif -%}
+
 {% set port_names_list = [] %}
 {% for port in PORT %}
     {%- if port_names_list.append(port) %}{% endif %}
@@ -5,34 +65,98 @@
 {% set port_names = port_names_list | join(',') -%}
 
 {
+    "CABLE_LENGTH": {
+        "AZURE": {
+    {% for port in PORT %}
+        {% set cable = cable_length(port) -%}
+        "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %}
+
+    {% endfor %}
+    }
+    },
     "BUFFER_POOL": {
+        "ingress_lossless_pool": {
+            "size": "47218432",
+            "type": "ingress",
+            "mode": "dynamic",
+            "xoff": "17708800"
+        },
         "lossy_pool": {
-            "size": "56985600",
+            "size": "18874368",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "66092800",
+            "mode": "static",
+            "type": "egress"
         }
     },
     "BUFFER_PROFILE": {
+        "ingress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "xoff":"38816",
+            "size":"1518",
+            "dynamic_th":"1",
+            "xon_offset":"9408"
+        },
+        "egress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "size":"0",
+            "static_th":"9497600"
+        },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers_defaults_def_lossy.j2
index 1a31812c26b1..abb756c7d4ef 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers_defaults_def_lossy.j2
@@ -15,24 +15,28 @@
     },
     "BUFFER_PROFILE": {
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "ingress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     },
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers_defaults_t1.j2
index 93dac6b1992a..17b85f08443a 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/buffers_defaults_t1.j2
@@ -86,52 +86,77 @@
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "66092800",
+		   "mode": "static",
+            "type": "egress"
         }
     },
     "BUFFER_PROFILE": {
         "ingress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "xoff":"38816",
             "size":"1518",
             "dynamic_th":"1",
-            "xon_offset":"13440"
+            "xon_offset":"9408"
         },
         "egress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        },
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]"
-        },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|egress_lossless_profile]"
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
         },
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
         },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/hwsku.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/hwsku.json
new file mode 100644
index 000000000000..c874d4d0b9ba
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/hwsku.json
@@ -0,0 +1,132 @@
+{
+    "interfaces": {
+        "Ethernet0": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet8": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet16": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet24": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet32": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet40": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet48": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet56": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet64": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet72": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet80": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet88": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet96": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet104": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet112": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet120": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet128": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet136": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet144": {
+            "default_brkout_mode": "4x10G[25G](4)",
+            "fec": "none"
+        },
+        "Ethernet152": {
+            "default_brkout_mode": "4x10G[25G](4)",
+            "fec": "none"
+        },
+        "Ethernet160": {
+            "default_brkout_mode": "4x10G[25G](4)",
+            "fec": "none"
+        },
+        "Ethernet168": {
+            "default_brkout_mode": "4x10G[25G](4)",
+            "fec": "none"
+        },
+        "Ethernet176": {
+            "default_brkout_mode": "4x10G[25G](4)",
+            "fec": "none"
+        },
+        "Ethernet184": {
+            "default_brkout_mode": "4x10G[25G](4)",
+            "fec": "none"
+        },
+        "Ethernet192": {
+            "default_brkout_mode": "4x10G[25G](4)",
+            "fec": "none"
+        },
+        "Ethernet200": {
+            "default_brkout_mode": "4x10G[25G](4)",
+            "fec": "none"
+        },
+        "Ethernet208": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet216": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet224": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet232": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet240": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet248": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/innovium.77700_A b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/innovium.77700_A
index 84aa41983606..ec13307805e1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/innovium.77700_A
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/innovium.77700_A
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/innovium.77700_B b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/innovium.77700_B
index 27297b313959..57ba52cbc3bc 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/innovium.77700_B
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/innovium.77700_B
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/ivm.sai.config.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/ivm.sai.config.yaml
old mode 100644
new mode 100755
index 5e5d2fe66861..b9f2cc4061d1
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/ivm.sai.config.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/ivm.sai.config.yaml
@@ -3,7 +3,7 @@ IFCS_SKU_FILE : "/usr/share/sonic/hwsku/innovium.77700_B"
 IFCS_INNO_CLI_PORT : "9999"
 IFCS_TARGET : "device"
 INNOVIUM_DIR : "/innovium"
-PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes"
+PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes:$INNOVIUM_DIR/ifcs_cmds:$INNOVIUM_DIR/testutil"
 PLATFORM_LIBRARY: "/usr/share/sonic/platform/lib_ivm_serdes_pltfm.so"
 IVM_SAI_DATAPATH_CONFIG_FILE: "/usr/share/sonic/hwsku/ivm.sai.datapath.config.yaml"
 IVM_SAI_PARAM_A0008: "32"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/pg_profile_lookup.ini b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/pg_profile_lookup.ini
index adcb52ab2a29..0d881737cfa1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/pg_profile_lookup.ini
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/pg_profile_lookup.ini
@@ -1,18 +1,22 @@
 # PG lossless profiles.
 # speed   cable size  xon  xoff  threshold xon_offset
-  25000   5m    1518  0    15680   1       13440
-  50000   5m    1518  0    21248   1       13440
-  100000  5m    1518  0    34624   1       13440
-  400000  5m    1518  0    117536  1       13440
-  25000   40m   1518  0    16928   1       13440
-  50000   40m   1518  0    23392   1       13440
-  100000  40m   1518  0    38816   1       13440
-  400000  40m   1518  0    135520  1       13440
-  25000   100m  1518  0    18848   1       13440
-  50000   100m  1518  0    27264   1       13440
-  100000  100m  1518  0    46496   1       13440
-  400000  100m  1518  0    166688  1       13440
-  25000   300m  1518  0    25184   1       13440
-  50000   300m  1518  0    40128   1       13440
-  100000  300m  1518  0    72384   1       13440
-  400000  300m  1518  0    268640  1       13440
+  25000   5m    1518  0    15680   1       9408
+  50000   5m    1518  0    21248   1       9408
+  100000  5m    1518  0    34624   1       9408
+  200000  5m    1518  0    62368   1       9408
+  400000  5m    1518  0    117536  1       9408
+  25000   40m   1518  0    16928   1       9408
+  50000   40m   1518  0    23392   1       9408
+  100000  40m   1518  0    38816   1       9408
+  200000  40m   1518  0    71904   1       9408
+  400000  40m   1518  0    135520  1       9408
+  25000   100m  1518  0    18848   1       9408
+  50000   100m  1518  0    27264   1       9408
+  100000  100m  1518  0    46496   1       9408
+  200000  100m  1518  0    87168   1       9408
+  400000  100m  1518  0    166688  1       9408
+  25000   300m  1518  0    25184   1       9408
+  50000   300m  1518  0    40128   1       9408
+  100000  300m  1518  0    72384   1       9408
+  200000  300m  1518  0    138112  1       9408
+  400000  300m  1518  0    268640  1       9408
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos.json.j2
old mode 100644
new mode 100755
index 104d2d78de87..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos.json.j2
@@ -32,87 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"0",
-            "4":"0",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"0",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
-    },
-    "SCHEDULER": {
-        "scheduler.7": {
-            "type": "STRICT"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_enable": "3,4"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
-    "QUEUE": {
-        "{{ port_names }}|7": {
-            "scheduler": "[SCHEDULER|scheduler.7]"
+    "WRED_PROFILE": {
+        "AZURE_LOSSLESS" : {
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos_defaults_def_lossy.j2
old mode 100644
new mode 100755
index 104d2d78de87..c1170619bc6c
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos_defaults_def_lossy.j2
@@ -23,8 +23,8 @@
         "0": "0",
         "1": "0",
         "2": "0",
-        "3": "3",
-        "4": "4",
+        "3": "1",
+        "4": "2",
         "5": "0",
         "6": "0",
         "7": "0"
@@ -99,11 +99,14 @@
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "SCHEDULER": {
         "scheduler.7": {
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos_defaults_t1.j2
old mode 100644
new mode 100755
index 4b9748c7b594..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_104x1025_6x100/qos_defaults_t1.j2
@@ -32,83 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"3",
-            "4":"4",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"1",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
             "pfc_enable": "3,4"
-        }
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "WRED_PROFILE": {
         "AZURE_LOSSLESS" : {
-            "red_min_threshold":"50000"
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers.json.j2
index 1a31812c26b1..794b5c854689 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers.json.j2
@@ -1,3 +1,63 @@
+{# Default values which will be used if no actual configura available #}
+{% set default_cable = '40m' %}
+
+{# Port configuration to cable length look-up table #}
+{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #}
+{# Roles described in the minigraph #}
+{% set ports2cable = {
+        'torrouter_server'       : '5m',
+        'leafrouter_torrouter'   : '40m',
+        'spinerouter_leafrouter' : '300m'
+        }
+%}
+
+{%- macro cable_length(port_name) %}
+    {%- set cable_len = [] %}
+    {%- for local_port in DEVICE_NEIGHBOR %}
+        {%- if local_port == port_name %}
+            {%- if DEVICE_NEIGHBOR_METADATA is defined and DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor_role = neighbor.type %}
+                {%- set roles1 = switch_role + '_' + neighbor_role %}
+                {%- set roles2 = neighbor_role + '_' + switch_role %}
+                {%- set roles1 = roles1 | lower %}
+                {%- set roles2 = roles2 | lower %}
+                {%- if roles1 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles1]) %}{% endif %}
+                {%- elif roles2 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles2]) %}{% endif %}
+                {%- endif %}
+            {%- endif %}
+        {%- endif %}
+    {%- endfor %}
+    {%- if cable_len -%}
+        {{ cable_len.0 }}
+    {%- else %}
+        {%- if switch_role.lower() == 'torrouter' %}
+            {%- for local_port in VLAN_MEMBER %}
+                {%- if local_port[1] == port_name %}
+                    {%- set roles3 = switch_role + '_' + 'server' %}
+                    {%- set roles3 = roles3 | lower %}
+                    {%- if roles3 in ports2cable %}
+                        {%- if cable_len.append(ports2cable[roles3]) %}{% endif %}
+                    {%- endif %}
+                {%- endif %}
+            {%- endfor %}
+            {%- if cable_len -%}
+                {{ cable_len.0 }}
+            {%- else -%}
+                {{ default_cable }}
+            {%- endif %}
+        {%- else -%}
+            {{ default_cable }}
+        {%- endif %}
+    {%- endif %}
+{%- endmacro %}
+
+{%- if DEVICE_METADATA is defined %}
+{%- set switch_role = DEVICE_METADATA['localhost']['type'] %}
+{%- endif -%}
+
 {% set port_names_list = [] %}
 {% for port in PORT %}
     {%- if port_names_list.append(port) %}{% endif %}
@@ -5,34 +65,98 @@
 {% set port_names = port_names_list | join(',') -%}
 
 {
+    "CABLE_LENGTH": {
+        "AZURE": {
+    {% for port in PORT %}
+        {% set cable = cable_length(port) -%}
+        "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %}
+
+    {% endfor %}
+    }
+    },
     "BUFFER_POOL": {
+        "ingress_lossless_pool": {
+            "size": "47218432",
+            "type": "ingress",
+            "mode": "dynamic",
+            "xoff": "17708800"
+        },
         "lossy_pool": {
-            "size": "56985600",
+            "size": "18874368",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "66092800",
+            "mode": "static",
+            "type": "egress"
         }
     },
     "BUFFER_PROFILE": {
+        "ingress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "xoff":"38816",
+            "size":"1518",
+            "dynamic_th":"1",
+            "xon_offset":"9408"
+        },
+        "egress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "size":"0",
+            "static_th":"9497600"
+        },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers_defaults_def_lossy.j2
index 1a31812c26b1..abb756c7d4ef 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers_defaults_def_lossy.j2
@@ -15,24 +15,28 @@
     },
     "BUFFER_PROFILE": {
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "ingress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     },
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers_defaults_t1.j2
index 93dac6b1992a..1479f78fed9e 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/buffers_defaults_t1.j2
@@ -86,52 +86,76 @@
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "66092800",
+            "type": "egress"
         }
     },
     "BUFFER_PROFILE": {
         "ingress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "xoff":"38816",
             "size":"1518",
             "dynamic_th":"1",
-            "xon_offset":"13440"
+            "xon_offset":"9408"
         },
         "egress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        },
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]"
-        },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|egress_lossless_profile]"
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
         },
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
         },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/hwsku.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/hwsku.json
new file mode 100644
index 000000000000..c597c7248c87
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/hwsku.json
@@ -0,0 +1,132 @@
+{
+    "interfaces": {
+        "Ethernet0": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet8": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet16": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet24": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet32": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet40": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet48": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet56": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet64": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet72": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet80": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet88": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet96": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet104": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet112": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet120": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet128": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet136": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet144": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet152": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet160": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet168": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet176": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet184": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet192": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet200": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet208": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet216": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet224": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet232": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet240": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet248": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/innovium.77700_A b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/innovium.77700_A
index 84aa41983606..ec13307805e1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/innovium.77700_A
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/innovium.77700_A
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/innovium.77700_B b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/innovium.77700_B
index 27297b313959..57ba52cbc3bc 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/innovium.77700_B
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/innovium.77700_B
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/ivm.sai.config.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/ivm.sai.config.yaml
old mode 100644
new mode 100755
index 8014caa1da4d..3a18ade8f2b2
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/ivm.sai.config.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/ivm.sai.config.yaml
@@ -3,7 +3,7 @@ IFCS_SKU_FILE : "/usr/share/sonic/hwsku/innovium.77700_A"
 IFCS_INNO_CLI_PORT : "9999"
 IFCS_TARGET : "device"
 INNOVIUM_DIR : "/innovium"
-PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes"
+PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes:$INNOVIUM_DIR/ifcs_cmds:$INNOVIUM_DIR/testutil"
 PLATFORM_LIBRARY: "/usr/share/sonic/platform/lib_ivm_serdes_pltfm.so"
 IVM_SAI_DATAPATH_CONFIG_FILE: "/usr/share/sonic/hwsku/ivm.sai.datapath.config.yaml"
 IVM_SAI_PARAM_A0008: "32"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/pg_profile_lookup.ini b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/pg_profile_lookup.ini
index adcb52ab2a29..0d881737cfa1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/pg_profile_lookup.ini
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/pg_profile_lookup.ini
@@ -1,18 +1,22 @@
 # PG lossless profiles.
 # speed   cable size  xon  xoff  threshold xon_offset
-  25000   5m    1518  0    15680   1       13440
-  50000   5m    1518  0    21248   1       13440
-  100000  5m    1518  0    34624   1       13440
-  400000  5m    1518  0    117536  1       13440
-  25000   40m   1518  0    16928   1       13440
-  50000   40m   1518  0    23392   1       13440
-  100000  40m   1518  0    38816   1       13440
-  400000  40m   1518  0    135520  1       13440
-  25000   100m  1518  0    18848   1       13440
-  50000   100m  1518  0    27264   1       13440
-  100000  100m  1518  0    46496   1       13440
-  400000  100m  1518  0    166688  1       13440
-  25000   300m  1518  0    25184   1       13440
-  50000   300m  1518  0    40128   1       13440
-  100000  300m  1518  0    72384   1       13440
-  400000  300m  1518  0    268640  1       13440
+  25000   5m    1518  0    15680   1       9408
+  50000   5m    1518  0    21248   1       9408
+  100000  5m    1518  0    34624   1       9408
+  200000  5m    1518  0    62368   1       9408
+  400000  5m    1518  0    117536  1       9408
+  25000   40m   1518  0    16928   1       9408
+  50000   40m   1518  0    23392   1       9408
+  100000  40m   1518  0    38816   1       9408
+  200000  40m   1518  0    71904   1       9408
+  400000  40m   1518  0    135520  1       9408
+  25000   100m  1518  0    18848   1       9408
+  50000   100m  1518  0    27264   1       9408
+  100000  100m  1518  0    46496   1       9408
+  200000  100m  1518  0    87168   1       9408
+  400000  100m  1518  0    166688  1       9408
+  25000   300m  1518  0    25184   1       9408
+  50000   300m  1518  0    40128   1       9408
+  100000  300m  1518  0    72384   1       9408
+  200000  300m  1518  0    138112  1       9408
+  400000  300m  1518  0    268640  1       9408
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos.json.j2
old mode 100644
new mode 100755
index 104d2d78de87..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos.json.j2
@@ -32,87 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"0",
-            "4":"0",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"0",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
-    },
-    "SCHEDULER": {
-        "scheduler.7": {
-            "type": "STRICT"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_enable": "3,4"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
-    "QUEUE": {
-        "{{ port_names }}|7": {
-            "scheduler": "[SCHEDULER|scheduler.7]"
+    "WRED_PROFILE": {
+        "AZURE_LOSSLESS" : {
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos_defaults_def_lossy.j2
old mode 100644
new mode 100755
index 104d2d78de87..c1170619bc6c
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos_defaults_def_lossy.j2
@@ -23,8 +23,8 @@
         "0": "0",
         "1": "0",
         "2": "0",
-        "3": "3",
-        "4": "4",
+        "3": "1",
+        "4": "2",
         "5": "0",
         "6": "0",
         "7": "0"
@@ -99,11 +99,14 @@
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "SCHEDULER": {
         "scheduler.7": {
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos_defaults_t1.j2
old mode 100644
new mode 100755
index 4b9748c7b594..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_24x400_8x100/qos_defaults_t1.j2
@@ -32,83 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"3",
-            "4":"4",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"1",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
             "pfc_enable": "3,4"
-        }
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "WRED_PROFILE": {
         "AZURE_LOSSLESS" : {
-            "red_min_threshold":"50000"
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers.json.j2
index 1a31812c26b1..794b5c854689 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers.json.j2
@@ -1,3 +1,63 @@
+{# Default values which will be used if no actual configura available #}
+{% set default_cable = '40m' %}
+
+{# Port configuration to cable length look-up table #}
+{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #}
+{# Roles described in the minigraph #}
+{% set ports2cable = {
+        'torrouter_server'       : '5m',
+        'leafrouter_torrouter'   : '40m',
+        'spinerouter_leafrouter' : '300m'
+        }
+%}
+
+{%- macro cable_length(port_name) %}
+    {%- set cable_len = [] %}
+    {%- for local_port in DEVICE_NEIGHBOR %}
+        {%- if local_port == port_name %}
+            {%- if DEVICE_NEIGHBOR_METADATA is defined and DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor_role = neighbor.type %}
+                {%- set roles1 = switch_role + '_' + neighbor_role %}
+                {%- set roles2 = neighbor_role + '_' + switch_role %}
+                {%- set roles1 = roles1 | lower %}
+                {%- set roles2 = roles2 | lower %}
+                {%- if roles1 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles1]) %}{% endif %}
+                {%- elif roles2 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles2]) %}{% endif %}
+                {%- endif %}
+            {%- endif %}
+        {%- endif %}
+    {%- endfor %}
+    {%- if cable_len -%}
+        {{ cable_len.0 }}
+    {%- else %}
+        {%- if switch_role.lower() == 'torrouter' %}
+            {%- for local_port in VLAN_MEMBER %}
+                {%- if local_port[1] == port_name %}
+                    {%- set roles3 = switch_role + '_' + 'server' %}
+                    {%- set roles3 = roles3 | lower %}
+                    {%- if roles3 in ports2cable %}
+                        {%- if cable_len.append(ports2cable[roles3]) %}{% endif %}
+                    {%- endif %}
+                {%- endif %}
+            {%- endfor %}
+            {%- if cable_len -%}
+                {{ cable_len.0 }}
+            {%- else -%}
+                {{ default_cable }}
+            {%- endif %}
+        {%- else -%}
+            {{ default_cable }}
+        {%- endif %}
+    {%- endif %}
+{%- endmacro %}
+
+{%- if DEVICE_METADATA is defined %}
+{%- set switch_role = DEVICE_METADATA['localhost']['type'] %}
+{%- endif -%}
+
 {% set port_names_list = [] %}
 {% for port in PORT %}
     {%- if port_names_list.append(port) %}{% endif %}
@@ -5,34 +65,98 @@
 {% set port_names = port_names_list | join(',') -%}
 
 {
+    "CABLE_LENGTH": {
+        "AZURE": {
+    {% for port in PORT %}
+        {% set cable = cable_length(port) -%}
+        "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %}
+
+    {% endfor %}
+    }
+    },
     "BUFFER_POOL": {
+        "ingress_lossless_pool": {
+            "size": "47218432",
+            "type": "ingress",
+            "mode": "dynamic",
+            "xoff": "17708800"
+        },
         "lossy_pool": {
-            "size": "56985600",
+            "size": "18874368",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "66092800",
+            "mode": "static",
+            "type": "egress"
         }
     },
     "BUFFER_PROFILE": {
+        "ingress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "xoff":"38816",
+            "size":"1518",
+            "dynamic_th":"1",
+            "xon_offset":"9408"
+        },
+        "egress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "size":"0",
+            "static_th":"9497600"
+        },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers_defaults_def_lossy.j2
index 1a31812c26b1..abb756c7d4ef 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers_defaults_def_lossy.j2
@@ -15,24 +15,28 @@
     },
     "BUFFER_PROFILE": {
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "ingress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     },
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers_defaults_t1.j2
index 93dac6b1992a..17b85f08443a 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/buffers_defaults_t1.j2
@@ -86,52 +86,77 @@
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "66092800",
+		   "mode": "static",
+            "type": "egress"
         }
     },
     "BUFFER_PROFILE": {
         "ingress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "xoff":"38816",
             "size":"1518",
             "dynamic_th":"1",
-            "xon_offset":"13440"
+            "xon_offset":"9408"
         },
         "egress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        },
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]"
-        },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|egress_lossless_profile]"
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
         },
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
         },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/hwsku.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/hwsku.json
new file mode 100644
index 000000000000..ac524d6920ce
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/hwsku.json
@@ -0,0 +1,132 @@
+{
+    "interfaces": {
+        "Ethernet0": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet8": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet16": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet24": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet32": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet40": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet48": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet56": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet64": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet72": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet80": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet88": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet96": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet104": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet112": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet120": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet128": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet136": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet144": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet152": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet160": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet168": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet176": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet184": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet192": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet200": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet208": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet216": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet224": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet232": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet240": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "none"
+        },
+        "Ethernet248": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/innovium.77700_A b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/innovium.77700_A
index 84aa41983606..ec13307805e1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/innovium.77700_A
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/innovium.77700_A
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/innovium.77700_B b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/innovium.77700_B
index 27297b313959..57ba52cbc3bc 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/innovium.77700_B
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/innovium.77700_B
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/ivm.sai.config.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/ivm.sai.config.yaml
old mode 100644
new mode 100755
index e17792d88daa..36fd34a546c4
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/ivm.sai.config.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/ivm.sai.config.yaml
@@ -3,7 +3,7 @@ IFCS_SKU_FILE : "/usr/share/sonic/hwsku/innovium.77700_A"
 IFCS_INNO_CLI_PORT : "9999"
 IFCS_TARGET : "device"
 INNOVIUM_DIR : "/innovium"
-PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes"
+PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes:$INNOVIUM_DIR/ifcs_cmds:$INNOVIUM_DIR/testutil"
 PLATFORM_LIBRARY: "/usr/share/sonic/platform/lib_ivm_serdes_pltfm.so"
 IVM_SAI_DATAPATH_CONFIG_FILE: "/usr/share/sonic/hwsku/ivm.sai.datapath.config.yaml"
 IVM_SAI_PARAM_A0008: "32"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/pg_profile_lookup.ini b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/pg_profile_lookup.ini
index adcb52ab2a29..0d881737cfa1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/pg_profile_lookup.ini
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/pg_profile_lookup.ini
@@ -1,18 +1,22 @@
 # PG lossless profiles.
 # speed   cable size  xon  xoff  threshold xon_offset
-  25000   5m    1518  0    15680   1       13440
-  50000   5m    1518  0    21248   1       13440
-  100000  5m    1518  0    34624   1       13440
-  400000  5m    1518  0    117536  1       13440
-  25000   40m   1518  0    16928   1       13440
-  50000   40m   1518  0    23392   1       13440
-  100000  40m   1518  0    38816   1       13440
-  400000  40m   1518  0    135520  1       13440
-  25000   100m  1518  0    18848   1       13440
-  50000   100m  1518  0    27264   1       13440
-  100000  100m  1518  0    46496   1       13440
-  400000  100m  1518  0    166688  1       13440
-  25000   300m  1518  0    25184   1       13440
-  50000   300m  1518  0    40128   1       13440
-  100000  300m  1518  0    72384   1       13440
-  400000  300m  1518  0    268640  1       13440
+  25000   5m    1518  0    15680   1       9408
+  50000   5m    1518  0    21248   1       9408
+  100000  5m    1518  0    34624   1       9408
+  200000  5m    1518  0    62368   1       9408
+  400000  5m    1518  0    117536  1       9408
+  25000   40m   1518  0    16928   1       9408
+  50000   40m   1518  0    23392   1       9408
+  100000  40m   1518  0    38816   1       9408
+  200000  40m   1518  0    71904   1       9408
+  400000  40m   1518  0    135520  1       9408
+  25000   100m  1518  0    18848   1       9408
+  50000   100m  1518  0    27264   1       9408
+  100000  100m  1518  0    46496   1       9408
+  200000  100m  1518  0    87168   1       9408
+  400000  100m  1518  0    166688  1       9408
+  25000   300m  1518  0    25184   1       9408
+  50000   300m  1518  0    40128   1       9408
+  100000  300m  1518  0    72384   1       9408
+  200000  300m  1518  0    138112  1       9408
+  400000  300m  1518  0    268640  1       9408
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos.json.j2
old mode 100644
new mode 100755
index 104d2d78de87..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos.json.j2
@@ -32,87 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"0",
-            "4":"0",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"0",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
-    },
-    "SCHEDULER": {
-        "scheduler.7": {
-            "type": "STRICT"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_enable": "3,4"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
-    "QUEUE": {
-        "{{ port_names }}|7": {
-            "scheduler": "[SCHEDULER|scheduler.7]"
+    "WRED_PROFILE": {
+        "AZURE_LOSSLESS" : {
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos_defaults_def_lossy.j2
old mode 100644
new mode 100755
index 104d2d78de87..c1170619bc6c
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos_defaults_def_lossy.j2
@@ -23,8 +23,8 @@
         "0": "0",
         "1": "0",
         "2": "0",
-        "3": "3",
-        "4": "4",
+        "3": "1",
+        "4": "2",
         "5": "0",
         "6": "0",
         "7": "0"
@@ -99,11 +99,14 @@
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "SCHEDULER": {
         "scheduler.7": {
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos_defaults_t1.j2
old mode 100644
new mode 100755
index 4b9748c7b594..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_28x400_4x100/qos_defaults_t1.j2
@@ -32,83 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"3",
-            "4":"4",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"1",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
             "pfc_enable": "3,4"
-        }
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "WRED_PROFILE": {
         "AZURE_LOSSLESS" : {
-            "red_min_threshold":"50000"
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers.json.j2
index 93dac6b1992a..020656fdb8f5 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers.json.j2
@@ -76,7 +76,7 @@
     },
     "BUFFER_POOL": {
         "ingress_lossless_pool": {
-            "size": "47218432",
+            "size": "51691264",
             "type": "ingress",
             "mode": "dynamic",
             "xoff": "17708800"
@@ -86,52 +86,77 @@
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "70565632",
+            "type": "egress",
+            "mode": "static"
         }
     },
     "BUFFER_PROFILE": {
         "ingress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "xoff":"38816",
             "size":"1518",
             "dynamic_th":"1",
-            "xon_offset":"13440"
+            "xon_offset":"9408"
         },
         "egress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        },
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]"
-        },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|egress_lossless_profile]"
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
         },
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
         },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers_defaults_def_lossy.j2
index 1a31812c26b1..79dbf9b2864b 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers_defaults_def_lossy.j2
@@ -7,7 +7,7 @@
 {
     "BUFFER_POOL": {
         "lossy_pool": {
-            "size": "56985600",
+            "size": "61458432",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
@@ -15,24 +15,28 @@
     },
     "BUFFER_PROFILE": {
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "ingress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     },
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers_defaults_t1.j2
index 93dac6b1992a..020656fdb8f5 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/buffers_defaults_t1.j2
@@ -76,7 +76,7 @@
     },
     "BUFFER_POOL": {
         "ingress_lossless_pool": {
-            "size": "47218432",
+            "size": "51691264",
             "type": "ingress",
             "mode": "dynamic",
             "xoff": "17708800"
@@ -86,52 +86,77 @@
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "70565632",
+            "type": "egress",
+            "mode": "static"
         }
     },
     "BUFFER_PROFILE": {
         "ingress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "xoff":"38816",
             "size":"1518",
             "dynamic_th":"1",
-            "xon_offset":"13440"
+            "xon_offset":"9408"
         },
         "egress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
-            "static_th":"9497600"
+            "static_th":"10243072"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        },
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]"
-        },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|egress_lossless_profile]"
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
         },
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
         },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/config_32x100G_wistron_sw_to3200k.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/config_32x100G_wistron_sw_to3200k.yaml
index a6f5d00d8b34..a0faac84625e 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/config_32x100G_wistron_sw_to3200k.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/config_32x100G_wistron_sw_to3200k.yaml
@@ -10,12 +10,11 @@ nodes:
     - auto_create: "no"
       multi_interface: "yes"
     buffer_management_mode: "api_driven"
+    wred_cr_ip_proto_list: "17"
+    cr_assignment_mode: "1"
     max_lossless_tc: "2"
     ilpm_enable: "1"
     forward_profile: "IFCS_FORWARD_PROFILE_ID_PROFILE_E"
-    pcie_attn: "10, 0, 0, 0"
-    pcie_post: "10, 18, 18, 18"
-    pcie_pre1: "0, 0, 0, 0"
     led_cfg_sck_rate: "0x5"
     led_refresh_precliff_timer: "0x18eec2"
     led_refresh_cliff_timer: "0x15e"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/hwsku.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/hwsku.json
new file mode 100644
index 000000000000..4116ae2ba5f1
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/hwsku.json
@@ -0,0 +1,132 @@
+{
+    "interfaces": {
+        "Ethernet0": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet8": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet16": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet24": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet32": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet40": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet48": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet56": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet64": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet72": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet80": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet88": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet96": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet104": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet112": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet120": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet128": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet136": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet144": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet152": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet160": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet168": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet176": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet184": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet192": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet200": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet208": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet216": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet224": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet232": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet240": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet248": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/innovium.77700_B b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/innovium.77700_B
index 27297b313959..57ba52cbc3bc 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/innovium.77700_B
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/innovium.77700_B
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/ivm.sai.config.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/ivm.sai.config.yaml
old mode 100644
new mode 100755
index 8ae2b9683d49..7bc06c952692
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/ivm.sai.config.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/ivm.sai.config.yaml
@@ -3,7 +3,7 @@ IFCS_SKU_FILE : "/usr/share/sonic/hwsku/innovium.77700_B"
 IFCS_INNO_CLI_PORT : "9999"
 IFCS_TARGET : "device"
 INNOVIUM_DIR : "/innovium"
-PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes"
+PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes:$INNOVIUM_DIR/ifcs_cmds:$INNOVIUM_DIR/testutil"
 PLATFORM_LIBRARY: "/usr/share/sonic/platform/lib_ivm_serdes_pltfm.so"
 IVM_SAI_DATAPATH_CONFIG_FILE: "/usr/share/sonic/hwsku/ivm.sai.datapath.config.yaml"
 IVM_SAI_PARAM_A0008: "32"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/pg_profile_lookup.ini b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/pg_profile_lookup.ini
index adcb52ab2a29..0d881737cfa1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/pg_profile_lookup.ini
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/pg_profile_lookup.ini
@@ -1,18 +1,22 @@
 # PG lossless profiles.
 # speed   cable size  xon  xoff  threshold xon_offset
-  25000   5m    1518  0    15680   1       13440
-  50000   5m    1518  0    21248   1       13440
-  100000  5m    1518  0    34624   1       13440
-  400000  5m    1518  0    117536  1       13440
-  25000   40m   1518  0    16928   1       13440
-  50000   40m   1518  0    23392   1       13440
-  100000  40m   1518  0    38816   1       13440
-  400000  40m   1518  0    135520  1       13440
-  25000   100m  1518  0    18848   1       13440
-  50000   100m  1518  0    27264   1       13440
-  100000  100m  1518  0    46496   1       13440
-  400000  100m  1518  0    166688  1       13440
-  25000   300m  1518  0    25184   1       13440
-  50000   300m  1518  0    40128   1       13440
-  100000  300m  1518  0    72384   1       13440
-  400000  300m  1518  0    268640  1       13440
+  25000   5m    1518  0    15680   1       9408
+  50000   5m    1518  0    21248   1       9408
+  100000  5m    1518  0    34624   1       9408
+  200000  5m    1518  0    62368   1       9408
+  400000  5m    1518  0    117536  1       9408
+  25000   40m   1518  0    16928   1       9408
+  50000   40m   1518  0    23392   1       9408
+  100000  40m   1518  0    38816   1       9408
+  200000  40m   1518  0    71904   1       9408
+  400000  40m   1518  0    135520  1       9408
+  25000   100m  1518  0    18848   1       9408
+  50000   100m  1518  0    27264   1       9408
+  100000  100m  1518  0    46496   1       9408
+  200000  100m  1518  0    87168   1       9408
+  400000  100m  1518  0    166688  1       9408
+  25000   300m  1518  0    25184   1       9408
+  50000   300m  1518  0    40128   1       9408
+  100000  300m  1518  0    72384   1       9408
+  200000  300m  1518  0    138112  1       9408
+  400000  300m  1518  0    268640  1       9408
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos.json.j2
old mode 100644
new mode 100755
index 4b9748c7b594..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos.json.j2
@@ -32,83 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"3",
-            "4":"4",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"1",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
             "pfc_enable": "3,4"
-        }
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "WRED_PROFILE": {
         "AZURE_LOSSLESS" : {
-            "red_min_threshold":"50000"
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos_defaults_def_lossy.j2
old mode 100644
new mode 100755
index 104d2d78de87..c1170619bc6c
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos_defaults_def_lossy.j2
@@ -23,8 +23,8 @@
         "0": "0",
         "1": "0",
         "2": "0",
-        "3": "3",
-        "4": "4",
+        "3": "1",
+        "4": "2",
         "5": "0",
         "6": "0",
         "7": "0"
@@ -99,11 +99,14 @@
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "SCHEDULER": {
         "scheduler.7": {
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos_defaults_t1.j2
old mode 100644
new mode 100755
index 4b9748c7b594..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_32x100/qos_defaults_t1.j2
@@ -32,83 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"3",
-            "4":"4",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"1",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
             "pfc_enable": "3,4"
-        }
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "WRED_PROFILE": {
         "AZURE_LOSSLESS" : {
-            "red_min_threshold":"50000"
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers.json.j2
index 1a31812c26b1..794b5c854689 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers.json.j2
@@ -1,3 +1,63 @@
+{# Default values which will be used if no actual configura available #}
+{% set default_cable = '40m' %}
+
+{# Port configuration to cable length look-up table #}
+{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #}
+{# Roles described in the minigraph #}
+{% set ports2cable = {
+        'torrouter_server'       : '5m',
+        'leafrouter_torrouter'   : '40m',
+        'spinerouter_leafrouter' : '300m'
+        }
+%}
+
+{%- macro cable_length(port_name) %}
+    {%- set cable_len = [] %}
+    {%- for local_port in DEVICE_NEIGHBOR %}
+        {%- if local_port == port_name %}
+            {%- if DEVICE_NEIGHBOR_METADATA is defined and DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] %}
+                {%- set neighbor_role = neighbor.type %}
+                {%- set roles1 = switch_role + '_' + neighbor_role %}
+                {%- set roles2 = neighbor_role + '_' + switch_role %}
+                {%- set roles1 = roles1 | lower %}
+                {%- set roles2 = roles2 | lower %}
+                {%- if roles1 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles1]) %}{% endif %}
+                {%- elif roles2 in ports2cable %}
+                    {%- if cable_len.append(ports2cable[roles2]) %}{% endif %}
+                {%- endif %}
+            {%- endif %}
+        {%- endif %}
+    {%- endfor %}
+    {%- if cable_len -%}
+        {{ cable_len.0 }}
+    {%- else %}
+        {%- if switch_role.lower() == 'torrouter' %}
+            {%- for local_port in VLAN_MEMBER %}
+                {%- if local_port[1] == port_name %}
+                    {%- set roles3 = switch_role + '_' + 'server' %}
+                    {%- set roles3 = roles3 | lower %}
+                    {%- if roles3 in ports2cable %}
+                        {%- if cable_len.append(ports2cable[roles3]) %}{% endif %}
+                    {%- endif %}
+                {%- endif %}
+            {%- endfor %}
+            {%- if cable_len -%}
+                {{ cable_len.0 }}
+            {%- else -%}
+                {{ default_cable }}
+            {%- endif %}
+        {%- else -%}
+            {{ default_cable }}
+        {%- endif %}
+    {%- endif %}
+{%- endmacro %}
+
+{%- if DEVICE_METADATA is defined %}
+{%- set switch_role = DEVICE_METADATA['localhost']['type'] %}
+{%- endif -%}
+
 {% set port_names_list = [] %}
 {% for port in PORT %}
     {%- if port_names_list.append(port) %}{% endif %}
@@ -5,34 +65,98 @@
 {% set port_names = port_names_list | join(',') -%}
 
 {
+    "CABLE_LENGTH": {
+        "AZURE": {
+    {% for port in PORT %}
+        {% set cable = cable_length(port) -%}
+        "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %}
+
+    {% endfor %}
+    }
+    },
     "BUFFER_POOL": {
+        "ingress_lossless_pool": {
+            "size": "47218432",
+            "type": "ingress",
+            "mode": "dynamic",
+            "xoff": "17708800"
+        },
         "lossy_pool": {
-            "size": "56985600",
+            "size": "18874368",
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "66092800",
+            "mode": "static",
+            "type": "egress"
         }
     },
     "BUFFER_PROFILE": {
+        "ingress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "xoff":"38816",
+            "size":"1518",
+            "dynamic_th":"1",
+            "xon_offset":"9408"
+        },
+        "egress_lossless_profile": {
+            "pool":"ingress_lossless_pool",
+            "size":"0",
+            "static_th":"9497600"
+        },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
+        },
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers_defaults_def_lossy.j2
index 1a31812c26b1..abb756c7d4ef 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers_defaults_def_lossy.j2
@@ -15,24 +15,28 @@
     },
     "BUFFER_PROFILE": {
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "ingress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     },
     "BUFFER_QUEUE": {
-            "{{ port_names }}|0-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+        "{{ port }}|0-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers_defaults_t1.j2
index 93dac6b1992a..17b85f08443a 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/buffers_defaults_t1.j2
@@ -86,52 +86,77 @@
             "type": "egress",
             "mode": "dynamic",
             "xoff": "0"
+        },
+        "egress_lossless_pool": {
+            "size": "66092800",
+		   "mode": "static",
+            "type": "egress"
         }
     },
     "BUFFER_PROFILE": {
         "ingress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "xoff":"38816",
             "size":"1518",
             "dynamic_th":"1",
-            "xon_offset":"13440"
+            "xon_offset":"9408"
         },
         "egress_lossless_profile": {
-            "pool":"[BUFFER_POOL|ingress_lossless_pool]",
+            "pool":"ingress_lossless_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "ingress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"0",
             "static_th":"9497600"
         },
         "egress_lossy_profile": {
-            "pool":"[BUFFER_POOL|lossy_pool]",
+            "pool":"lossy_pool",
             "size":"1518",
             "dynamic_th":"2"
         }
     },
     "BUFFER_PG": {
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        },
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]"
-        },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|ingress_lossy_profile]"
-        }
+{% for port in port_names_list %}
+                "{{ port }}|3-4": {
+                     "profile" : "ingress_lossless_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|0": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|1-2": {
+                    "profile" : "ingress_lossy_profile"
+                },
+{% endfor %}
+{% for port in port_names_list %}
+                "{{ port }}|5-7": {
+                    "profile" : "ingress_lossy_profile"
+                }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
+
     "BUFFER_QUEUE": {
-        "{{ port_names }}|3-4": {
-            "profile" : "[BUFFER_PROFILE|egress_lossless_profile]"
+{% for port in port_names_list %}
+        "{{ port }}|3-4": {
+             "profile" : "egress_lossless_profile"
         },
-        "{{ port_names }}|0-2": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|0-2": {
+            "profile" : "egress_lossy_profile"
         },
-        "{{ port_names }}|5-7": {
-            "profile" : "[BUFFER_PROFILE|egress_lossy_profile]"
-        }
+{% endfor %}
+{% for port in port_names_list %}
+        "{{ port }}|5-7": {
+            "profile" : "egress_lossy_profile"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/hwsku.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/hwsku.json
new file mode 100644
index 000000000000..6472483dc248
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/hwsku.json
@@ -0,0 +1,132 @@
+{
+    "interfaces": {
+        "Ethernet0": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet8": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet16": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet24": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet32": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet40": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet48": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet56": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet64": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet72": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet80": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet88": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet96": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet104": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet112": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet120": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet128": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet136": {
+            "default_brkout_mode": "4x25G[10G](4)",
+            "fec": "rs"
+        },
+        "Ethernet144": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet152": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet160": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet168": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet176": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet184": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet192": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet200": {
+            "default_brkout_mode": "1x100G(4)",
+            "fec": "rs"
+        },
+        "Ethernet208": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet216": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet224": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet232": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet240": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        },
+        "Ethernet248": {
+            "default_brkout_mode": "1x400G[100G]",
+            "fec": "rs"
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/innovium.77700_A b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/innovium.77700_A
index 84aa41983606..ec13307805e1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/innovium.77700_A
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/innovium.77700_A
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/innovium.77700_B b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/innovium.77700_B
index 27297b313959..57ba52cbc3bc 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/innovium.77700_B
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/innovium.77700_B
@@ -5,6 +5,7 @@ device_id:         0x1b58
 # Hardware constraint information
 hardware:
         num_ibs:           6
+        ib_active:         0,1,2,3,4,5
 
         ports_per_ib:      32, 32, 32, 32, 20, 20
         recirc_port_num:   32, 32, 32, 32, 32, 32
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/ivm.sai.config.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/ivm.sai.config.yaml
old mode 100644
new mode 100755
index 01fe64ec7bc9..36da27953d49
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/ivm.sai.config.yaml
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/ivm.sai.config.yaml
@@ -3,7 +3,7 @@ IFCS_SKU_FILE : "/usr/share/sonic/hwsku/innovium.77700_A"
 IFCS_INNO_CLI_PORT : "9999"
 IFCS_TARGET : "device"
 INNOVIUM_DIR : "/innovium"
-PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes"
+PYTHONPATH : "$INNOVIUM_DIR:$INNOVIUM_DIR/cmds:$INNOVIUM_DIR/scripts:$INNOVIUM_DIR/test/:$INNOVIUM_DIR/test/utils:$INNOVIUM_DIR/utils:$INNOVIUM_DIR/pyctypes:$INNOVIUM_DIR/ifcs_cmds:$INNOVIUM_DIR/testutil"
 PLATFORM_LIBRARY: "/usr/share/sonic/platform/lib_ivm_serdes_pltfm.so"
 IVM_SAI_DATAPATH_CONFIG_FILE: "/usr/share/sonic/hwsku/ivm.sai.datapath.config.yaml"
 IVM_SAI_PARAM_A0008: "32"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/pg_profile_lookup.ini b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/pg_profile_lookup.ini
index adcb52ab2a29..0d881737cfa1 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/pg_profile_lookup.ini
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/pg_profile_lookup.ini
@@ -1,18 +1,22 @@
 # PG lossless profiles.
 # speed   cable size  xon  xoff  threshold xon_offset
-  25000   5m    1518  0    15680   1       13440
-  50000   5m    1518  0    21248   1       13440
-  100000  5m    1518  0    34624   1       13440
-  400000  5m    1518  0    117536  1       13440
-  25000   40m   1518  0    16928   1       13440
-  50000   40m   1518  0    23392   1       13440
-  100000  40m   1518  0    38816   1       13440
-  400000  40m   1518  0    135520  1       13440
-  25000   100m  1518  0    18848   1       13440
-  50000   100m  1518  0    27264   1       13440
-  100000  100m  1518  0    46496   1       13440
-  400000  100m  1518  0    166688  1       13440
-  25000   300m  1518  0    25184   1       13440
-  50000   300m  1518  0    40128   1       13440
-  100000  300m  1518  0    72384   1       13440
-  400000  300m  1518  0    268640  1       13440
+  25000   5m    1518  0    15680   1       9408
+  50000   5m    1518  0    21248   1       9408
+  100000  5m    1518  0    34624   1       9408
+  200000  5m    1518  0    62368   1       9408
+  400000  5m    1518  0    117536  1       9408
+  25000   40m   1518  0    16928   1       9408
+  50000   40m   1518  0    23392   1       9408
+  100000  40m   1518  0    38816   1       9408
+  200000  40m   1518  0    71904   1       9408
+  400000  40m   1518  0    135520  1       9408
+  25000   100m  1518  0    18848   1       9408
+  50000   100m  1518  0    27264   1       9408
+  100000  100m  1518  0    46496   1       9408
+  200000  100m  1518  0    87168   1       9408
+  400000  100m  1518  0    166688  1       9408
+  25000   300m  1518  0    25184   1       9408
+  50000   300m  1518  0    40128   1       9408
+  100000  300m  1518  0    72384   1       9408
+  200000  300m  1518  0    138112  1       9408
+  400000  300m  1518  0    268640  1       9408
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos.json.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos.json.j2
old mode 100644
new mode 100755
index 104d2d78de87..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos.json.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos.json.j2
@@ -32,87 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"0",
-            "4":"0",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"0",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
-    },
-    "SCHEDULER": {
-        "scheduler.7": {
-            "type": "STRICT"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
+            "pfc_enable": "3,4"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
-    "QUEUE": {
-        "{{ port_names }}|7": {
-            "scheduler": "[SCHEDULER|scheduler.7]"
+    "WRED_PROFILE": {
+        "AZURE_LOSSLESS" : {
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos_defaults_def_lossy.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos_defaults_def_lossy.j2
old mode 100644
new mode 100755
index 104d2d78de87..c1170619bc6c
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos_defaults_def_lossy.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos_defaults_def_lossy.j2
@@ -23,8 +23,8 @@
         "0": "0",
         "1": "0",
         "2": "0",
-        "3": "3",
-        "4": "4",
+        "3": "1",
+        "4": "2",
         "5": "0",
         "6": "0",
         "7": "0"
@@ -99,11 +99,14 @@
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]"
-        }
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE"
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "SCHEDULER": {
         "scheduler.7": {
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos_defaults_t1.j2 b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos_defaults_t1.j2
old mode 100644
new mode 100755
index 4b9748c7b594..b03078465730
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos_defaults_t1.j2
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/Wistron_sw_to3200k_72x25_6x400/qos_defaults_t1.j2
@@ -32,83 +32,98 @@
     },
        "DSCP_TO_TC_MAP": {
         "AZURE": {
-            "0":"0",
-            "1":"0",
-            "2":"0",
-            "3":"3",
-            "4":"4",
-            "5":"0",
-            "6":"0",
-            "7":"0",
-            "8":"1",
-            "9":"0",
-            "10":"0",
-            "11":"0",
-            "12":"0",
-            "13":"0",
-            "14":"0",
-            "15":"0",
-            "16":"0",
-            "17":"0",
-            "18":"0",
-            "19":"0",
-            "20":"0",
-            "21":"0",
-            "22":"0",
-            "23":"0",
-            "24":"0",
-            "25":"0",
-            "26":"0",
-            "27":"0",
-            "28":"0",
-            "29":"0",
-            "30":"0",
-            "31":"0",
-            "32":"0",
-            "33":"0",
-            "34":"0",
-            "35":"0",
-            "36":"0",
-            "37":"0",
-            "38":"0",
-            "39":"0",
-            "40":"0",
-            "41":"0",
-            "42":"0",
-            "43":"0",
-            "44":"0",
-            "45":"0",
-            "46":"0",
-            "47":"0",
-            "48":"0",
-            "49":"0",
-            "50":"0",
-            "51":"0",
-            "52":"0",
-            "53":"0",
-            "54":"0",
-            "55":"0",
-            "56":"0",
-            "57":"0",
-            "58":"0",
-            "59":"0",
-            "60":"0",
-            "61":"0",
-            "62":"0",
-            "63":"0"
+            "0" : "1",
+            "1" : "1",
+            "2" : "1",
+            "3" : "3",
+            "4" : "4",
+            "5" : "2",
+            "6" : "1",
+            "7" : "1",
+            "8" : "0",
+            "9" : "1",
+            "10": "1",
+            "11": "1",
+            "12": "1",
+            "13": "1",
+            "14": "1",
+            "15": "1",
+            "16": "1",
+            "17": "1",
+            "18": "1",
+            "19": "1",
+            "20": "1",
+            "21": "1",
+            "22": "1",
+            "23": "1",
+            "24": "1",
+            "25": "1",
+            "26": "1",
+            "27": "1",
+            "28": "1",
+            "29": "1",
+            "30": "1",
+            "31": "1",
+            "32": "1",
+            "33": "1",
+            "34": "1",
+            "35": "1",
+            "36": "1",
+            "37": "1",
+            "38": "1",
+            "39": "1",
+            "40": "1",
+            "41": "1",
+            "42": "1",
+            "43": "1",
+            "44": "1",
+            "45": "1",
+            "46": "5",
+            "47": "1",
+            "48": "6",
+            "49": "1",
+            "50": "1",
+            "51": "1",
+            "52": "1",
+            "53": "1",
+            "54": "1",
+            "55": "1",
+            "56": "1",
+            "57": "1",
+            "58": "1",
+            "59": "1",
+            "60": "1",
+            "61": "1",
+            "62": "1",
+            "63": "1"
         }
     },
     "PORT_QOS_MAP": {
-       "{{ port_names }}": {
-            "tc_to_pg_map": "[TC_TO_PRIORITY_GROUP_MAP|AZURE]",
-            "tc_to_queue_map": "[TC_TO_QUEUE_MAP|AZURE]",
-            "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]",
+{% for port in port_names_list %}
+       "{{ port }}": {
+            "tc_to_pg_map": "AZURE",
+            "tc_to_queue_map": "AZURE",
+            "dscp_to_tc_map": "AZURE",
             "pfc_enable": "3,4"
-        }
+        }{% if not loop.last %},{% endif %}
+
+{% endfor %}
     },
     "WRED_PROFILE": {
         "AZURE_LOSSLESS" : {
-            "red_min_threshold":"50000"
+            "wred_green_enable"      : "true",
+            "wred_yellow_enable"     : "true",
+            "wred_red_enable"        : "true",
+            "ecn"                    : "ecn_all",
+            "green_max_threshold"    : "2097152",
+            "green_min_threshold"    : "1048576",
+            "yellow_max_threshold"   : "2097152",
+            "yellow_min_threshold"   : "1048576",
+            "red_max_threshold"      : "2097152",
+            "red_min_threshold"      : "1048576",
+            "green_drop_probability" : "5",
+            "yellow_drop_probability": "5",
+            "red_drop_probability"   : "5"
         }
     }
 }
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/installer.conf b/device/wistron/x86_64-wistron_sw_to3200k-r0/installer.conf
index 6af5fa8d979b..d7d410dae704 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/installer.conf
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/installer.conf
@@ -1,4 +1,4 @@
 CONSOLE_PORT=0x3f8
 CONSOLE_DEV=4
 CONSOLE_SPEED=115200
-ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="pcie_aspm=off"
+ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="pcie_aspm=off intel_iommu=off"
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/libplatform.so b/device/wistron/x86_64-wistron_sw_to3200k-r0/libplatform.so
new file mode 100644
index 000000000000..1ca41771ff2d
Binary files /dev/null and b/device/wistron/x86_64-wistron_sw_to3200k-r0/libplatform.so differ
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/pcie.yaml b/device/wistron/x86_64-wistron_sw_to3200k-r0/pcie.yaml
new file mode 100755
index 000000000000..ef4b521c66d3
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/pcie.yaml
@@ -0,0 +1,375 @@
+- bus: '00'
+  dev: '00'
+  fn: '0'
+  id: 6f00
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 (rev 03)'
+- bus: '00'
+  dev: '01'
+  fn: '0'
+  id: 6f02
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 03)'
+- bus: '00'
+  dev: '01'
+  fn: '1'
+  id: 6f03
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 1 (rev 03)'
+- bus: '00'
+  dev: '02'
+  fn: '0'
+  id: 6f04
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 (rev 03)'
+- bus: '00'
+  dev: '02'
+  fn: '2'
+  id: 6f06
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 2 (rev 03)'
+- bus: '00'
+  dev: '03'
+  fn: '0'
+  id: 6f08
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 03)'
+- bus: '00'
+  dev: '03'
+  fn: '1'
+  id: 6f09
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 03)'
+- bus: '00'
+  dev: '03'
+  fn: '2'
+  id: 6f0a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 03)'
+- bus: '00'
+  dev: '03'
+  fn: '3'
+  id: 6f0b
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D PCI Express Root Port 3 (rev 03)'
+- bus: '00'
+  dev: '05'
+  fn: '0'
+  id: 6f28
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management (rev 03)'
+- bus: '00'
+  dev: '05'
+  fn: '1'
+  id: 6f29
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug (rev 03)'
+- bus: '00'
+  dev: '05'
+  fn: '2'
+  id: 6f2a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors (rev 03)'
+- bus: '00'
+  dev: '05'
+  fn: '4'
+  id: 6f2c
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC (rev 03)'
+- bus: '00'
+  dev: '14'
+  fn: '0'
+  id: 8c31
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)'
+- bus: '00'
+  dev: '1c'
+  fn: '0'
+  id: 8c10
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)'
+- bus: '00'
+  dev: '1c'
+  fn: '6'
+  id: 8c1c
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d5)'
+- bus: '00'
+  dev: '1c'
+  fn: '7'
+  id: 8c1e
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d5)'
+- bus: '00'
+  dev: '1f'
+  fn: '0'
+  id: 8c54
+  name: 'Intel Corporation C224 Series Chipset Family Server Standard SKU LPC Controller (rev 05)'
+- bus: '00'
+  dev: '1f'
+  fn: '3'
+  id: 8c22
+  name: 'Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)'
+- bus: '03'
+  dev: '00'
+  fn: '0'
+  id: 6f50
+  name: 'Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 0'
+- bus: '03'
+  dev: '00'
+  fn: '1'
+  id: 6f51
+  name: 'Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 1'
+- bus: '03'
+  dev: '00'
+  fn: '2'
+  id: 6f52
+  name: 'Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 2'
+- bus: '03'
+  dev: '00'
+  fn: '3'
+  id: 6f53
+  name: 'Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 3'
+- bus: '04'
+  dev: '00'
+  fn: '0'
+  id: 15ac
+  name: 'Intel Corporation Ethernet Connection X552 10 GbE SFP+'
+- bus: '04'
+  dev: '00'
+  fn: '1'
+  id: 15ac
+  name: 'Intel Corporation Ethernet Connection X552 10 GbE SFP+'
+- bus: '06'
+  dev: '00'
+  fn: '0'
+  id: 1b58
+  name: 'Device 1d98:1b58 (rev 10)'
+- bus: '07'
+  dev: '00'
+  fn: '0'
+  id: 9100
+  name: 'Solid State Storage Technology Corporation Device 9100 (rev 03)'
+- bus: '0b'
+  dev: '00'
+  fn: '0'
+  id: e001
+  name: 'Altera Corporation Device e001 (rev 09)'
+- bus: '0c'
+  dev: '00'
+  fn: '0'
+  id: 1533
+  name: 'Intel Corporation I210 Gigabit Network Connection (rev 03)'
+- bus: 'ff'
+  dev: '0b'
+  fn: '0'
+  id: 6f81
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 03)'
+- bus: 'ff'
+  dev: '0b'
+  fn: '1'
+  id: 6f36
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 03)'
+- bus: 'ff'
+  dev: '0b'
+  fn: '2'
+  id: 6f37
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 03)'
+- bus: 'ff'
+  dev: '0b'
+  fn: '3'
+  id: 6f76
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link Debug (rev 03)'
+- bus: 'ff'
+  dev: '0c'
+  fn: '0'
+  id: 6fe0
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 03)'
+- bus: 'ff'
+  dev: '0c'
+  fn: '1'
+  id: 6fe1
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 03)'
+- bus: 'ff'
+  dev: '0c'
+  fn: '2'
+  id: 6fe2
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 03)'
+- bus: 'ff'
+  dev: '0c'
+  fn: '3'
+  id: 6fe3
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 03)'
+- bus: 'ff'
+  dev: '0f'
+  fn: '0'
+  id: 6ff8
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 03)'
+- bus: 'ff'
+  dev: '0f'
+  fn: '4'
+  id: 6ffc
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 03)'
+- bus: 'ff'
+  dev: '0f'
+  fn: '5'
+  id: 6ffd
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 03)'
+- bus: 'ff'
+  dev: '0f'
+  fn: '6'
+  id: 6ffe
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Caching Agent (rev 03)'
+- bus: 'ff'
+  dev: '10'
+  fn: '0'
+  id: 6f1d
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent (rev 03)'
+- bus: 'ff'
+  dev: '10'
+  fn: '1'
+  id: 6f34
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R2PCIe Agent (rev 03)'
+- bus: 'ff'
+  dev: '10'
+  fn: '5'
+  id: 6f1e
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 03)'
+- bus: 'ff'
+  dev: '10'
+  fn: '6'
+  id: 6f7d
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 03)'
+- bus: 'ff'
+  dev: '10'
+  fn: '7'
+  id: 6f1f
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Ubox (rev 03)'
+- bus: 'ff'
+  dev: '12'
+  fn: '0'
+  id: 6fa0
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 (rev 03)'
+- bus: 'ff'
+  dev: '12'
+  fn: '1'
+  id: 6f30
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Home Agent 0 (rev 03)'
+- bus: 'ff'
+  dev: '13'
+  fn: '0'
+  id: 6fa8
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS (rev 03)'
+- bus: 'ff'
+  dev: '13'
+  fn: '1'
+  id: 6f71
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Target Address/Thermal/RAS (rev 03)'
+- bus: 'ff'
+  dev: '13'
+  fn: '2'
+  id: 6faa
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 03)'
+- bus: 'ff'
+  dev: '13'
+  fn: '3'
+  id: 6fab
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 03)'
+- bus: 'ff'
+  dev: '13'
+  fn: '4'
+  id: 6fac
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 03)'
+- bus: 'ff'
+  dev: '13'
+  fn: '5'
+  id: 6fad
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel Target Address Decoder (rev 03)'
+- bus: 'ff'
+  dev: '13'
+  fn: '6'
+  id: 6fae
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Broadcast (rev 03)'
+- bus: 'ff'
+  dev: '13'
+  fn: '7'
+  id: 6faf
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Global Broadcast (rev 03)'
+- bus: 'ff'
+  dev: '14'
+  fn: '0'
+  id: 6fb0
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Thermal Control (rev 03)'
+- bus: 'ff'
+  dev: '14'
+  fn: '1'
+  id: 6fb1
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Thermal Control (rev 03)'
+- bus: 'ff'
+  dev: '14'
+  fn: '2'
+  id: 6fb2
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 0 Error (rev 03)'
+- bus: 'ff'
+  dev: '14'
+  fn: '3'
+  id: 6fb3
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 1 Error (rev 03)'
+- bus: 'ff'
+  dev: '14'
+  fn: '4'
+  id: 6fbc
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 03)'
+- bus: 'ff'
+  dev: '14'
+  fn: '5'
+  id: 6fbd
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 03)'
+- bus: 'ff'
+  dev: '14'
+  fn: '6'
+  id: 6fbe
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 03)'
+- bus: 'ff'
+  dev: '14'
+  fn: '7'
+  id: 6fbf
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DDRIO Channel 0/1 Interface (rev 03)'
+- bus: 'ff'
+  dev: '15'
+  fn: '0'
+  id: 6fb4
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Thermal Control (rev 03)'
+- bus: 'ff'
+  dev: '15'
+  fn: '1'
+  id: 6fb5
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Thermal Control (rev 03)'
+- bus: 'ff'
+  dev: '15'
+  fn: '2'
+  id: 6fb6
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 2 Error (rev 03)'
+- bus: 'ff'
+  dev: '15'
+  fn: '3'
+  id: 6fb7
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Memory Controller 0 - Channel 3 Error (rev 03)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '0'
+  id: 6f98
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 03)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '1'
+  id: 6f99
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 03)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '2'
+  id: 6f9a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 03)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '3'
+  id: 6fc0
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 03)'
+- bus: 'ff'
+  dev: '1e'
+  fn: '4'
+  id: 6f9c
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 03)'
+- bus: 'ff'
+  dev: '1f'
+  fn: '0'
+  id: 6f88
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 03)'
+- bus: 'ff'
+  dev: '1f'
+  fn: '2'
+  id: 6f8a
+  name: 'Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit (rev 03)'
\ No newline at end of file
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/platform.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/platform.json
new file mode 100644
index 000000000000..18dcca800329
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/platform.json
@@ -0,0 +1,844 @@
+{
+    "chassis": {
+        "name": "Wistron_sw_to3200k",
+        "components": [
+            {
+                "name": "BIOS"
+            },
+            {
+                "name": "CPLD1"
+            },
+            {
+                "name": "CPLD2"
+            },
+            {
+                "name": "MB_FPGA"
+            },
+            {
+                "name": "FAN_CPLD"
+            },
+            {
+                "name": "BMC"
+            }
+        ],
+        "fans": [
+            {
+                "name": "FAN-1F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-1R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-2F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-2R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-3F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-3R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-4F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-4R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-5F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-5R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-6F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-6R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-7F",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "FAN-7R",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                }
+            }
+		],
+        "fan_drawers": [
+            {
+                "name": "FanTray1",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-1F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-1R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray2",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-2F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-2R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray3",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-3F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-3R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray4",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-4F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-4R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray5",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-5F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-5R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray6",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-6F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-6R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            },
+            {
+                "name": "FanTray7",
+                "speed": {
+                    "controllable": false
+                },
+                "status_led": {
+                    "controllable": false
+                },
+                "fans": [
+                    {
+                        "name": "FAN-7F",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    },
+                    {
+                        "name": "FAN-7R",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ]
+            }
+        ],
+        "psus": [
+            {
+                "name": "PSU-1",
+                "fans": [
+                    {
+                        "name": "PSU-1 FAN-1",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ],
+                "status_led": {
+                    "controllable": false
+                }
+            },
+            {
+                "name": "PSU-2",
+                "fans": [
+                    {
+                        "name": "PSU-2 FAN-1",
+                        "speed": {
+                            "controllable": false
+                        },
+                        "status_led": {
+                            "controllable": false
+                        }
+                    }
+                ],
+                "status_led": {
+                    "controllable": false
+                }
+            }
+        ],
+        "thermals": [
+            {
+                "name": "Bottom-Front",
+                "controllable": false
+            },
+            {
+                "name": "Bottom-Rear",
+                "controllable": false
+            },
+            {
+                "name": "Left-Front",
+                "controllable": false
+            },
+            {
+                "name": "Right-Front",
+                "controllable": false
+            },
+            {
+                "name": "Top-Center",
+                "controllable": false
+            },
+            {
+                "name": "Top-Front",
+                "controllable": false
+            },
+            {
+                "name": "Top-Rear",
+                "controllable": false
+            }
+        ],
+        "sfps": [
+            {
+                "name": "port1"
+            },
+            {
+                "name": "port2"
+            },
+            {
+                "name": "port3"
+            },
+            {
+                "name": "port4"
+            },
+            {
+                "name": "port5"
+            },
+            {
+                "name": "port6"
+            },
+            {
+                "name": "port7"
+            },
+            {
+                "name": "port8"
+            },
+            {
+                "name": "port9"
+            },
+            {
+                "name": "port10"
+            },
+            {
+                "name": "port11"
+            },
+            {
+                "name": "port12"
+            },
+            {
+                "name": "port13"
+            },
+            {
+                "name": "port14"
+            },
+            {
+                "name": "port15"
+            },
+            {
+                "name": "port16"
+            },
+            {
+                "name": "port17"
+            },
+            {
+                "name": "port18"
+            },
+            {
+                "name": "port19"
+            },
+            {
+                "name": "port20"
+            },
+            {
+                "name": "port21"
+            },
+            {
+                "name": "port22"
+            },
+            {
+                "name": "port23"
+            },
+            {
+                "name": "port24"
+            },
+            {
+                "name": "port25"
+            },
+            {
+                "name": "port26"
+            },
+            {
+                "name": "port27"
+            },
+            {
+                "name": "port28"
+            },
+            {
+                "name": "port29"
+            },
+            {
+                "name": "port30"
+            },
+            {
+                "name": "port31"
+            },
+            {
+                "name": "port32"
+            }
+        ]
+    },
+    "interfaces": {
+        "Ethernet0": {
+            "index": "0,0,0,0,0,0,0,0",
+            "lanes": "89,90,91,92,93,94,95,96",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth1"],
+                "1x100G(4)": ["Eth1"],
+                "4x25G[10G](4)": ["Eth1-1", "Eth1-2", "Eth1-3", "Eth1-4"],
+                "4x10G[25G](4)": ["Eth1-1", "Eth1-2", "Eth1-3", "Eth1-4"]
+            }
+        },
+        "Ethernet8": {
+            "index": "1,1,1,1,1,1,1,1",
+            "lanes": "81,82,83,84,85,86,87,88",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth2"],
+                "1x100G(4)": ["Eth2"],
+                "4x25G[10G](4)": ["Eth2-1", "Eth2-2", "Eth2-3", "Eth2-4"],
+                "4x10G[25G](4)": ["Eth2-1", "Eth2-2", "Eth2-3", "Eth2-4"]
+            }
+        },
+        "Ethernet16": {
+            "index": "2,2,2,2,2,2,2,2",
+            "lanes": "73,74,75,76,77,78,79,80",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth3"],
+                "1x100G(4)": ["Eth3"],
+                "4x25G[10G](4)": ["Eth3-1", "Eth3-2", "Eth3-3", "Eth3-4"],
+                "4x10G[25G](4)": ["Eth3-1", "Eth3-2", "Eth3-3", "Eth3-4"]
+            }
+        },
+        "Ethernet24": {
+            "index": "3,3,3,3,3,3,3,3",
+            "lanes": "65,66,67,68,69,70,71,72",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth4"],
+                "1x100G(4)": ["Eth4"],
+                "4x25G[10G](4)": ["Eth4-1", "Eth4-2", "Eth4-3", "Eth4-4"],
+                "4x10G[25G](4)": ["Eth4-1", "Eth4-2", "Eth4-3", "Eth4-4"]
+            }
+        },
+        "Ethernet32": {
+            "index": "4,4,4,4,4,4,4,4",
+            "lanes": "57,58,59,60,61,62,63,64",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth5"],
+                "1x100G(4)": ["Eth5"],
+                "4x25G[10G](4)": ["Eth5-1", "Eth5-2", "Eth5-3", "Eth5-4"],
+                "4x10G[25G](4)": ["Eth5-1", "Eth5-2", "Eth5-3", "Eth5-4"]
+            }
+        },
+        "Ethernet40": {
+            "index": "5,5,5,5,5,5,5,5",
+            "lanes": "49,50,51,52,53,54,55,56",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth6"],
+                "1x100G(4)": ["Eth6"],
+                "4x25G[10G](4)": ["Eth6-1", "Eth6-2", "Eth6-3", "Eth6-4"],
+                "4x10G[25G](4)": ["Eth6-1", "Eth6-2", "Eth6-3", "Eth6-4"]
+            }
+        },
+        "Ethernet48": {
+            "index": "6,6,6,6,6,6,6,6",
+            "lanes": "41,42,43,44,45,46,47,48",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth7"],
+                "1x100G(4)": ["Eth7"],
+                "4x25G[10G](4)": ["Eth7-1", "Eth7-2", "Eth7-3", "Eth7-4"],
+                "4x10G[25G](4)": ["Eth7-1", "Eth7-2", "Eth7-3", "Eth7-4"]
+            }
+        },
+        "Ethernet56": {
+            "index": "7,7,7,7,7,7,7,7",
+            "lanes": "33,34,35,36,37,38,39,40",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth8"],
+                "1x100G(4)": ["Eth8"],
+                "4x25G[10G](4)": ["Eth8-1", "Eth8-2", "Eth8-3", "Eth8-4"],
+                "4x10G[25G](4)": ["Eth8-1", "Eth8-2", "Eth8-3", "Eth8-4"]
+            }
+        },
+        "Ethernet64": {
+            "index": "8,8,8,8,8,8,8,8",
+            "lanes": "153,154,155,156,157,158,159,160",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth9"],
+                "1x100G(4)": ["Eth9"],
+                "4x25G[10G](4)": ["Eth9-1", "Eth9-2", "Eth9-3", "Eth9-4"],
+                "4x10G[25G](4)": ["Eth9-1", "Eth9-2", "Eth9-3", "Eth9-4"]
+            }
+        },
+        "Ethernet72": {
+            "index": "9,9,9,9,9,9,9,9",
+            "lanes": "145,146,147,148,149,150,151,152",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth10"],
+                "1x100G(4)": ["Eth10"],
+                "4x25G[10G](4)": ["Eth10-1", "Eth10-2", "Eth10-3", "Eth10-4"],
+                "4x10G[25G](4)": ["Eth10-1", "Eth10-2", "Eth10-3", "Eth10-4"]
+            }
+        },
+        "Ethernet80": {
+            "index": "10,10,10,10,10,10,10,10",
+            "lanes": "137,138,139,140,141,142,143,144",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth11"],
+                "1x100G(4)": ["Eth11"],
+                "4x25G[10G](4)": ["Eth11-1", "Eth11-2", "Eth11-3", "Eth11-4"],
+                "4x10G[25G](4)": ["Eth11-1", "Eth11-2", "Eth11-3", "Eth11-4"]
+            }
+        },
+        "Ethernet88": {
+            "index": "11,11,11,11,11,11,11,11",
+            "lanes": "129,130,131,132,133,134,135,136",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth12"],
+                "1x100G(4)": ["Eth12"],
+                "4x25G[10G](4)": ["Eth12-1", "Eth12-2", "Eth12-3", "Eth12-4"],
+                "4x10G[25G](4)": ["Eth12-1", "Eth12-2", "Eth12-3", "Eth12-4"]
+            }
+        },
+        "Ethernet96": {
+            "index": "12,12,12,12,12,12,12,12",
+            "lanes": "121,122,123,124,125,126,127,128",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth13"],
+                "1x100G(4)": ["Eth13"],
+                "4x25G[10G](4)": ["Eth13-1", "Eth13-2", "Eth13-3", "Eth13-4"],
+                "4x10G[25G](4)": ["Eth13-1", "Eth13-2", "Eth13-3", "Eth13-4"]
+            }
+        },
+        "Ethernet104": {
+            "index": "13,13,13,13,13,13,13,13",
+            "lanes": "113,114,115,116,117,118,119,120",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth14"],
+                "1x100G(4)": ["Eth14"],
+                "4x25G[10G](4)": ["Eth14-1", "Eth14-2", "Eth14-3", "Eth14-4"],
+                "4x10G[25G](4)": ["Eth14-1", "Eth14-2", "Eth14-3", "Eth14-4"]
+            }
+        },
+        "Ethernet112": {
+            "index": "14,14,14,14,14,14,14,14",
+            "lanes": "105,106,107,108,109,110,111,112",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth15"],
+                "1x100G(4)": ["Eth15"],
+                "4x25G[10G](4)": ["Eth15-1", "Eth15-2", "Eth15-3", "Eth15-4"],
+                "4x10G[25G](4)": ["Eth15-1", "Eth15-2", "Eth15-3", "Eth15-4"]
+            }
+        },
+        "Ethernet120": {
+            "index": "15,15,15,15,15,15,15,15",
+            "lanes": "97,98,99,100,101,102,103,104",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth16"],
+                "1x100G(4)": ["Eth16"],
+                "4x25G[10G](4)": ["Eth16-1", "Eth16-2", "Eth16-3", "Eth16-4"],
+                "4x10G[25G](4)": ["Eth16-1", "Eth16-2", "Eth16-3", "Eth16-4"]
+            }
+        },
+        "Ethernet128": {
+            "index": "16,16,16,16,16,16,16,16",
+            "lanes": "209,210,211,212,213,214,215,216",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth17"],
+                "1x100G(4)": ["Eth17"],
+                "4x25G[10G](4)": ["Eth17-1", "Eth17-2", "Eth17-3", "Eth17-4"],
+                "4x10G[25G](4)": ["Eth17-1", "Eth17-2", "Eth17-3", "Eth17-4"]
+            }
+        },
+        "Ethernet136": {
+            "index": "17,17,17,17,17,17,17,17",
+            "lanes": "217,218,219,220,221,222,223,224",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth18"],
+                "1x100G(4)": ["Eth18"],
+                "4x25G[10G](4)": ["Eth18-1", "Eth18-2", "Eth18-3", "Eth18-4"],
+                "4x10G[25G](4)": ["Eth18-1", "Eth18-2", "Eth18-3", "Eth18-4"]
+            }
+        },
+        "Ethernet144": {
+            "index": "18,18,18,18,18,18,18,18",
+            "lanes": "193,194,195,196,197,198,199,200",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth19"],
+                "1x100G(4)": ["Eth19"],
+                "4x25G[10G](4)": ["Eth19-1", "Eth19-2", "Eth19-3", "Eth19-4"],
+                "4x10G[25G](4)": ["Eth19-1", "Eth19-2", "Eth19-3", "Eth19-4"]
+            }
+        },
+        "Ethernet152": {
+            "index": "19,19,19,19,19,19,19,19",
+            "lanes": "201,202,203,204,205,206,207,208",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth20"],
+                "1x100G(4)": ["Eth20"],
+                "4x25G[10G](4)": ["Eth20-1", "Eth20-2", "Eth20-3", "Eth20-4"],
+                "4x10G[25G](4)": ["Eth20-1", "Eth20-2", "Eth20-3", "Eth20-4"]
+            }
+        },
+        "Ethernet160": {
+            "index": "20,20,20,20,20,20,20,20",
+            "lanes": "177,178,179,180,181,182,183,184",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth21"],
+                "1x100G(4)": ["Eth21"],
+                "4x25G[10G](4)": ["Eth21-1", "Eth21-2", "Eth21-3", "Eth21-4"],
+                "4x10G[25G](4)": ["Eth21-1", "Eth21-2", "Eth21-3", "Eth21-4"]
+            }
+        },
+        "Ethernet168": {
+            "index": "21,21,21,21,21,21,21,21",
+            "lanes": "185,186,187,188,189,190,191,192",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth22"],
+                "1x100G(4)": ["Eth22"],
+                "4x25G[10G](4)": ["Eth22-1", "Eth22-2", "Eth22-3", "Eth22-4"],
+                "4x10G[25G](4)": ["Eth22-1", "Eth22-2", "Eth22-3", "Eth22-4"]
+            }
+        },
+        "Ethernet176": {
+            "index": "22,22,22,22,22,22,22,22",
+            "lanes": "161,162,163,164,165,166,167,168",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth23"],
+                "1x100G(4)": ["Eth23"],
+                "4x25G[10G](4)": ["Eth23-1", "Eth23-2", "Eth23-3", "Eth23-4"],
+                "4x10G[25G](4)": ["Eth23-1", "Eth23-2", "Eth23-3", "Eth23-4"]
+            }
+        },
+        "Ethernet184": {
+            "index": "23,23,23,23,23,23,23,23",
+            "lanes": "169,170,171,172,173,174,175,176",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth24"],
+                "1x100G(4)": ["Eth24"],
+                "4x25G[10G](4)": ["Eth24-1", "Eth24-2", "Eth24-3", "Eth24-4"],
+                "4x10G[25G](4)": ["Eth24-1", "Eth24-2", "Eth24-3", "Eth24-4"]
+            }
+        },
+        "Ethernet192": {
+            "index": "24,24,24,24,24,24,24,24",
+            "lanes": "17,18,19,20,21,22,23,24",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth25"],
+                "1x100G(4)": ["Eth25"],
+                "4x25G[10G](4)": ["Eth25-1", "Eth25-2", "Eth25-3", "Eth25-4"],
+                "4x10G[25G](4)": ["Eth25-1", "Eth25-2", "Eth25-3", "Eth25-4"]
+            }
+        },
+        "Ethernet200": {
+            "index": "25,25,25,25,25,25,25,25",
+            "lanes": "25,26,27,28,29,30,31,32",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth26"],
+                "1x100G(4)": ["Eth26"],
+                "4x25G[10G](4)": ["Eth26-1", "Eth26-2", "Eth26-3", "Eth26-4"],
+                "4x10G[25G](4)": ["Eth26-1", "Eth26-2", "Eth26-3", "Eth26-4"]
+            }
+        },
+        "Ethernet208": {
+            "index": "26,26,26,26,26,26,26,26",
+            "lanes": "1,2,3,4,5,6,7,8",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth27"],
+                "1x100G(4)": ["Eth27"],
+                "4x25G[10G](4)": ["Eth27-1", "Eth27-2", "Eth27-3", "Eth27-4"],
+                "4x10G[25G](4)": ["Eth27-1", "Eth27-2", "Eth27-3", "Eth27-4"]
+            }
+        },
+        "Ethernet216": {
+            "index": "27,27,27,27,27,27,27,27",
+            "lanes": "9,10,11,12,13,14,15,16",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth28"],
+                "1x100G(4)": ["Eth28"],
+                "4x25G[10G](4)": ["Eth28-1", "Eth28-2", "Eth28-3", "Eth28-4"],
+                "4x10G[25G](4)": ["Eth28-1", "Eth28-2", "Eth28-3", "Eth28-4"]
+            }
+        },
+        "Ethernet224": {
+            "index": "28,28,28,28,28,28,28,28",
+            "lanes": "241,242,243,244,245,246,247,248",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth29"],
+                "1x100G(4)": ["Eth29"],
+                "4x25G[10G](4)": ["Eth29-1", "Eth29-2", "Eth29-3", "Eth29-4"],
+                "4x10G[25G](4)": ["Eth29-1", "Eth29-2", "Eth29-3", "Eth29-4"]
+            }
+        },
+        "Ethernet232": {
+            "index": "29,29,29,29,29,29,29,29",
+            "lanes": "249,250,251,252,253,254,255,256",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth30"],
+                "1x100G(4)": ["Eth30"],
+                "4x25G[10G](4)": ["Eth30-1", "Eth30-2", "Eth30-3", "Eth30-4"],
+                "4x10G[25G](4)": ["Eth30-1", "Eth30-2", "Eth30-3", "Eth30-4"]
+            }
+        },
+        "Ethernet240": {
+            "index": "30,30,30,30,30,30,30,30",
+            "lanes": "225,226,227,228,229,230,231,232",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth31"],
+                "1x100G(4)": ["Eth31"],
+                "4x25G[10G](4)": ["Eth31-1", "Eth31-2", "Eth31-3", "Eth31-4"],
+                "4x10G[25G](4)": ["Eth31-1", "Eth31-2", "Eth31-3", "Eth31-4"]
+            }
+        },
+        "Ethernet248": {
+            "index": "31,31,31,31,31,31,31,31",
+            "lanes": "233,234,235,236,237,238,239,240",
+            "breakout_modes": {
+                "1x400G[100G]": ["Eth32"],
+                "1x100G(4)": ["Eth32"],
+                "4x25G[10G](4)": ["Eth32-1", "Eth32-2", "Eth32-3", "Eth32-4"],
+                "4x10G[25G](4)": ["Eth32-1", "Eth32-2", "Eth32-3", "Eth32-4"]
+            }
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/platform_components.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/platform_components.json
new file mode 100644
index 000000000000..304fbcb52557
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/platform_components.json
@@ -0,0 +1,14 @@
+{
+    "chassis": {
+        "Wistron_sw_to3200k": {
+            "component": {
+                "BIOS": { },
+                "CPLD1": { },
+                "CPLD2": { },
+                "MB_FPGA": { },
+                "FAN_CPLD": { },
+                "BMC": { }
+            }
+        }
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/plugins/eeprom.py b/device/wistron/x86_64-wistron_sw_to3200k-r0/plugins/eeprom.py
index 9f59510eac28..b7724886eea4 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/plugins/eeprom.py
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/plugins/eeprom.py
@@ -3,16 +3,16 @@
 try:
     import os
     from sonic_eeprom import eeprom_tlvinfo
-except ImportError, e:
+except ImportError as e:
     raise ImportError (str(e) + "- required module not found")
 
 def eeprom_check():
-    filepath="/sys/bus/i2c/devices/0-0056/eeprom"    
+    filepath="/sys/bus/i2c/devices/0-0056/eeprom"
     if os.path.isfile(filepath):
         return 1 #now board, 0x56
     else:
         return 0 #now board, 0x57
-    
+
 class board(eeprom_tlvinfo.TlvInfoDecoder):
     _TLV_INFO_MAX_LEN = 256
     def __init__(self, name, path, cpld_root, ro):
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/plugins/sfputil.py b/device/wistron/x86_64-wistron_sw_to3200k-r0/plugins/sfputil.py
index fe59dc7d8ce5..8983579016b4 100644
--- a/device/wistron/x86_64-wistron_sw_to3200k-r0/plugins/sfputil.py
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/plugins/sfputil.py
@@ -111,7 +111,7 @@ def get_presence(self, port_num):
             content = val_file.readline().rstrip()
             val_file.close()
         except IOError as e:
-            print "Error: unable to access file: %s" % str(e)
+            print("Error: unable to access file: %s" % str(e))
             return False
 
         if content == "1":
@@ -145,13 +145,13 @@ def get_transceiver_change_event(self, timeout=0):
         elif timeout > 0:
             timeout = timeout / float(1000) # Convert to secs
         else:
-            print "get_transceiver_change_event:Invalid timeout value", timeout
+            print("get_transceiver_change_event:Invalid timeout value", timeout)
             return False, {}
 
         end_time = start_time + timeout
         if start_time > end_time:
-            print 'get_transceiver_change_event:' \
-                       'time wrap / invalid timeout value', timeout
+            print('get_transceiver_change_event:' \
+                       'time wrap / invalid timeout value', timeout)
 
             return False, {} # Time wrap or possibly incorrect timeout
 
@@ -182,5 +182,5 @@ def get_transceiver_change_event(self, timeout=0):
                     if timeout > 0:
                         time.sleep(timeout)
                     return True, {}
-        print "get_evt_change_event: Should not reach here."
+        print("get_evt_change_event: Should not reach here.")
         return False, {}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/smartd.conf b/device/wistron/x86_64-wistron_sw_to3200k-r0/smartd.conf
new file mode 100644
index 000000000000..c3877d93ee28
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/smartd.conf
@@ -0,0 +1,150 @@
+# Sample configuration file for smartd.  See man smartd.conf.
+
+# Home page is: http://www.smartmontools.org
+
+# smartd will re-read the configuration file if it receives a HUP
+# signal
+
+# The file gives a list of devices to monitor using smartd, with one
+# device per line. Text after a hash (#) is ignored, and you may use
+# spaces and tabs for white space. You may use '\' to continue lines.
+
+# You can usually identify which hard disks are on your system by
+# looking in /proc/ide and in /proc/scsi.
+
+# The word DEVICESCAN will cause any remaining lines in this
+# configuration file to be ignored: it tells smartd to scan for all
+# ATA and SCSI devices.  DEVICESCAN may be followed by any of the
+# Directives listed below, which will be applied to all devices that
+# are found.  Most users should comment out DEVICESCAN and explicitly
+# list the devices that they wish to monitor.
+#DEVICESCAN -d removable -n standby -m root -M exec /usr/share/smartmontools/smartd-runner
+
+# Alternative setting to ignore temperature and power-on hours reports
+# in syslog.
+#DEVICESCAN -I 194 -I 231 -I 9
+
+# Alternative setting to report more useful raw temperature in syslog.
+#DEVICESCAN -R 194 -R 231 -I 9
+
+# Alternative setting to report raw temperature changes >= 5 Celsius
+# and min/max temperatures.
+#DEVICESCAN -I 194 -I 231 -I 9 -W 5
+
+# First ATA/SATA or SCSI/SAS disk.  Monitor all attributes, enable
+# automatic online data collection, automatic Attribute autosave, and
+# start a short self-test every day between 2-3am, and a long self test
+# Saturdays between 3-4am.
+#/dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03)
+
+# Monitor SMART status, ATA Error Log, Self-test log, and track
+# changes in all attributes except for attribute 194
+#/dev/sdb -H -l error -l selftest -t -I 194
+
+# Monitor all attributes except normalized Temperature (usually 194),
+# but track Temperature changes >= 4 Celsius, report Temperatures
+# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
+# Send mail on SMART failures or when Temperature is >= 55 Celsius.
+#/dev/sdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
+
+# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
+# ATA Translation (SAT) layer is between the OS and the device then
+# this can be flagged with the '-d sat' option. This situation may
+# become common with SATA disks in SAS and FC environments.
+# /dev/sda -a -d sat
+
+# A very silent check.  Only report SMART health status if it fails
+# But send an email in this case
+#/dev/sdc -H -C 0 -U 0 -m admin@example.com
+
+# First two SCSI disks.  This will monitor everything that smartd can
+# monitor.  Start extended self-tests Wednesdays between 6-7pm and
+# Sundays between 1-2 am
+#/dev/sda -d scsi -s L/../../3/18
+#/dev/sdb -d scsi -s L/../../7/01
+
+# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
+# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
+# and 4-5 am.
+# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
+# is DEPRECATED.  Use the /dev/tweN character device interface instead.
+# For example /dev/twe0, /dev/twe1, and so on.
+#/dev/sdc -d 3ware,0 -a -s L/../../7/01
+#/dev/sdc -d 3ware,1 -a -s L/../../7/02
+#/dev/sdc -d 3ware,2 -a -s L/../../7/03
+#/dev/sdc -d 3ware,3 -a -s L/../../7/04
+
+# Monitor 2 ATA disks connected to a 3ware 9000 controller which
+# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
+
+# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
+# uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
+# between 1-2 and 3-4 am.
+# On FreeBSD /dev/tws0 should be used instead
+#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
+#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
+
+# Same as above for Windows. Option '-d 3ware,N' is not necessary,
+# disk (port) number is specified in device name.
+# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
+#/dev/hdc,0 -a -s L/../../2/01
+#/dev/hdc,1 -a -s L/../../2/03
+#
+# Monitor 2 disks connected to the first HP SmartArray controller which
+# uses the cciss driver. Start long tests on Sunday nights and short
+# self-tests every night and send errors to root
+#/dev/cciss/c0d0 -d cciss,0 -a -s (L/../../7/02|S/../.././02) -m root
+#/dev/cciss/c0d0 -d cciss,1 -a -s (L/../../7/03|S/../.././03) -m root
+
+# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
+# self-tests Sundays between 1-2, 2-3, and 3-4 am.
+#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
+#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
+#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
+
+# Monitor 2 ATA disks connected to the same PMPort which connected to the
+# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
+#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
+#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
+
+# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
+# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
+#
+#   -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
+#   -T TYPE set the tolerance to one of: normal, permissive
+#   -o VAL  Enable/disable automatic offline tests (on/off)
+#   -S VAL  Enable/disable attribute autosave (on/off)
+#   -n MODE No check. MODE is one of: never, sleep, standby, idle
+#   -H      Monitor SMART Health Status, report if failed
+#   -l TYPE Monitor SMART log.  Type is one of: error, selftest
+#   -f      Monitor for failure of any 'Usage' Attributes
+#   -m ADD  Send warning email to ADD for -H, -l error, -l selftest, and -f
+#   -M TYPE Modify email warning behavior (see man page)
+#   -s REGE Start self-test when type/date matches regular expression (see man page)
+#   -p      Report changes in 'Prefailure' Normalized Attributes
+#   -u      Report changes in 'Usage' Normalized Attributes
+#   -t      Equivalent to -p and -u Directives
+#   -r ID   Also report Raw values of Attribute ID with -p, -u or -t
+#   -R ID   Track changes in Attribute ID Raw value with -p, -u or -t
+#   -i ID   Ignore Attribute ID for -f Directive
+#   -I ID   Ignore Attribute ID for -p, -u or -t Directive
+#   -C ID   Report if Current Pending Sector count non-zero
+#   -U ID   Report if Offline Uncorrectable count non-zero
+#   -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
+#   -v N,ST Modifies labeling of Attribute N (see man page)
+#   -a      Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
+#   -F TYPE Use firmware bug workaround. Type is one of: none, samsung
+#   -P TYPE Drive-specific presets: use, ignore, show, showall
+#    #      Comment: text after a hash sign is ignored
+#    \      Line continuation character
+# Attribute ID is a decimal integer 1 <= ID <= 255
+# except for -C and -U, where ID = 0 turns them off.
+# All but -d, -m and -M Directives are only implemented for ATA devices
+#
+# If the test string DEVICESCAN is the first uncommented text
+# then smartd will scan for devices.
+# DEVICESCAN may be followed by any desired Directives.
+/dev/nvme0n1 -a
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/system_health_monitoring_config.json b/device/wistron/x86_64-wistron_sw_to3200k-r0/system_health_monitoring_config.json
new file mode 100644
index 000000000000..0e0eec971cac
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/system_health_monitoring_config.json
@@ -0,0 +1,11 @@
+{
+    "services_to_ignore": [],
+    "devices_to_ignore": ["asic"],
+    "user_defined_checkers": [],
+    "polling_interval": 60,
+    "led_color": {
+        "fault": "red",
+        "normal": "green",
+        "booting": "green_blinking"
+    }
+}
diff --git a/device/wistron/x86_64-wistron_sw_to3200k-r0/watchdog-control.service b/device/wistron/x86_64-wistron_sw_to3200k-r0/watchdog-control.service
new file mode 100644
index 000000000000..02ffe8ce9189
--- /dev/null
+++ b/device/wistron/x86_64-wistron_sw_to3200k-r0/watchdog-control.service
@@ -0,0 +1,10 @@
+[Unit]
+Description=watchdog control service
+After=swss.service
+
+[Service]
+Type=simple
+ExecStart=/usr/local/bin/sw_to3200k_watchdog.sh
+
+[Install]
+WantedBy=multi-user.target
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/Makefile b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/Makefile
index 86a67f55089b..4e7a7e8191b7 100644
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/Makefile
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/Makefile
@@ -1,7 +1,7 @@
 ifneq ($(KERNELRELEASE),)
 obj-m:= wistron_6512_32r_cpld.o wistron_6512_32r_fan.o \
 		wistron_6512_32r_oom.o wistron_6512_32r_psu.o \
-		wistron_6512_32r_thermal.o \
+		wistron_6512_32r_thermal.o i2c-imc.o \
 		wistron_6512_32r_leds.o wistron_6512_32r_syseeprom.o
 else
 ifeq (,$(KERNEL_SRC))
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/i2c-imc.c b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/i2c-imc.c
new file mode 100644
index 000000000000..a650f3cf1923
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/i2c-imc.c
@@ -0,0 +1,515 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Intel Memory Controller iMC SMBus Driver to DIMMs.
+ *
+ * Copyright (c) 2013-2016 Andrew Lutomirski <luto@kernel.org>
+ * Copyright (c) 2020 Stefan Schaeckeler <sschaeck@cisco.com>, Cisco Systems
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/i2c.h>
+
+/* iMC Main, PCI dev 0x13, fn 0, 8086.6fa8 */
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_TA 0x6fa8
+
+/* Register offsets for channel pairs 0+1 and 2+3 */
+#define SMBSTAT(i)                 (0x180 + 0x10*(i))
+#define SMBCMD(i)                  (0x184 + 0x10*(i))
+#define SMBCNTL(i)                 (0x188 + 0x10*(i))
+
+/* SMBSTAT fields */
+#define SMBSTAT_RDO                (1U << 31)      /* Read Data Valid */
+#define SMBSTAT_WOD                (1U << 30)      /* Write Operation Done */
+#define SMBSTAT_SBE                (1U << 29)      /* SMBus Error */
+#define SMBSTAT_SMB_BUSY           (1U << 28)      /* SMBus Busy State */
+#define SMBSTAT_RDATA_MASK         0xffff          /* Result of a read */
+
+/* SMBCMD fields */
+#define SMBCMD_TRIGGER             (1U << 31)      /* CMD Trigger */
+#define SMBCMD_WORD_ACCESS         (1U << 29)      /* Word (vs byte) access */
+#define SMBCMD_TYPE_READ           (0U << 27)      /* Read */
+#define SMBCMD_TYPE_WRITE          (1U << 27)      /* Write */
+#define SMBCMD_SA_SHIFT            24
+#define SMBCMD_BA_SHIFT            16
+
+/* SMBCNTL fields */
+#define SMBCNTL_DTI_MASK           0xf0000000      /* Slave Address low bits */
+#define SMBCNTL_DTI_SHIFT          28              /* Slave Address low bits */
+#define SMBCNTL_DIS_WRT            (1U << 26)      /* Disable Write */
+#define SMBCNTL_TSOD_PRES_MASK     0xff            /* DIMM Present mask */
+
+/* For sanity check: bits that might randomly change if we race with firmware */
+#define SMBCMD_OUR_BITS            (~(u32)SMBCMD_TRIGGER)
+#define SMBCNTL_OUR_BITS           (SMBCNTL_DTI_MASK)
+
+
+/* System Address Decoder, PCI dev 0xf fn 5, 8086.6ffd */
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_SAD 0x6ffd
+
+/* Register offsets */
+#define SADCNTL                    0xf4
+
+/* SADCNTL fields */
+#define SADCNTL_LOCAL_NODEID_MASK  0xf             /* Local NodeID of socket */
+
+
+/* Power Control Unit, PCI dev 0x1e fn 1, 8086.6f99 */
+#define PCI_DEVICE_ID_INTEL_BROADWELL_IMC_PCU 0x6f99
+
+/* Register offsets */
+#define TSODCNTL                   0xe0
+
+/* TSODCNTL fields */
+
+
+/* DIMMs hold jc42 thermal sensors starting at i2c address 0x18 */
+#define DIMM_SENSOR_DRV            "jc42"
+#define DIMM_SENSOR_BASE_ADR       0x18
+
+
+#define sanitycheck 1
+
+struct imc_channelpair {
+	struct i2c_adapter adapter;
+	bool can_write, cltt;
+};
+
+struct imc_pcu {
+	struct pci_dev *pci_dev;
+	u32 tsod_polling_interval;
+	struct mutex mutex; /* see imc_channelpair_claim() */
+};
+
+struct imc_priv {
+	struct pci_dev *pci_dev;
+	struct imc_channelpair channelpair[2];
+	struct imc_pcu pcu;
+	bool suspended;
+};
+
+static int imc_channelpair_claim(struct imc_priv *priv, int i)
+{
+	if (priv->suspended)
+		return -EIO;
+
+	/*
+	 * i2c controllers need exclusive access to a psu register and wait
+	 * then for 10ms before starting their transaction.
+	 *
+	 * Possible optimization: Once an i2c controller modified the psu
+	 * register and waits, the other controller does not need to wait for
+	 * the whole 10ms, but then only this other controller has to clean up
+	 * the psu register.
+	 */
+	mutex_lock(&priv->pcu.mutex);
+
+	if (priv->channelpair[i].cltt) {
+		pci_write_config_dword(priv->pcu.pci_dev, TSODCNTL, 0);
+		usleep_range(10000, 10500);
+	}
+	return 0;
+}
+
+static void imc_channelpair_release(struct imc_priv *priv, int i)
+{
+	if (priv->channelpair[i].cltt) {
+		/* set tosd_control.tsod_polling_interval to previous value */
+		pci_write_config_dword(priv->pcu.pci_dev, TSODCNTL,
+				priv->pcu.tsod_polling_interval);
+	}
+	mutex_unlock(&priv->pcu.mutex);
+}
+
+static bool imc_wait_for_transaction(struct imc_priv *priv, int i, u32 *stat)
+{
+	int j;
+	static int busywaits = 1;
+
+	/*
+	 * Distribution of transaction time from 10000 collected samples:
+	 *
+	 * 70us: 1, 80us: 12, 90us: 34, 100us: 132, 110us: 424, 120us: 1138,
+	 * 130us: 5224, 140us: 3035.
+	 *
+	 */
+	usleep_range(131, 140);
+
+	/* Don't give up, yet */
+	for (j = 0; j < 20; j++) {
+		pci_read_config_dword(priv->pci_dev, SMBSTAT(i), stat);
+		if (!(*stat & SMBSTAT_SMB_BUSY)) {
+			if (j > busywaits) {
+				busywaits = j;
+				dev_warn(&priv->pci_dev->dev,
+						"Discovered surprisingly long transaction time (%d)\n",
+						busywaits);
+			}
+			return true;
+		}
+		udelay(9);
+	}
+	return false;
+}
+
+/*
+ * The iMC supports five access types. The terminology is rather inconsistent.
+ * These are the types:
+ *
+ * "Write to pointer register SMBus": I2C_SMBUS_WRITE, I2C_SMBUS_BYTE
+ *
+ * Read byte/word: I2C_SMBUS_READ, I2C_SMBUS_{BYTE|WORD}_DATA
+ *
+ * Write byte/word: I2C_SMBUS_WRITE, I2C_SMBUS_{BYTE|WORD}_DATA
+ */
+
+static u32 imc_func(struct i2c_adapter *adapter)
+{
+	int i;
+	struct imc_channelpair *cp;
+	struct imc_priv *priv = i2c_get_adapdata(adapter);
+
+	i = (adapter == &priv->channelpair[0].adapter ? 0 : 1);
+	cp = &priv->channelpair[i];
+
+	if (cp->can_write)
+		return I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
+	else
+		return I2C_FUNC_SMBUS_READ_BYTE_DATA |
+			I2C_FUNC_SMBUS_READ_WORD_DATA;
+}
+
+static s32 imc_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+		unsigned short flags, char read_write, u8 command,
+		int size, union i2c_smbus_data *data)
+{
+	int ret, i;
+	u32 cmd = 0, cntl, stat;
+#ifdef sanitycheck
+	u32 final_cmd, final_cntl;
+#endif
+	struct imc_channelpair *cp;
+	struct imc_priv *priv = i2c_get_adapdata(adap);
+
+	i = (adap == &priv->channelpair[0].adapter ? 0 : 1);
+	cp = &priv->channelpair[i];
+
+	/* Encode CMD part of addresses and access size */
+	cmd |= ((u32)addr & 0x7) << SMBCMD_SA_SHIFT;
+	cmd |= ((u32)command) << SMBCMD_BA_SHIFT;
+	if (size == I2C_SMBUS_WORD_DATA)
+		cmd |= SMBCMD_WORD_ACCESS;
+
+	/* Encode read/write and data to write */
+	if (read_write == I2C_SMBUS_READ) {
+		cmd |= SMBCMD_TYPE_READ;
+	} else {
+		cmd |= SMBCMD_TYPE_WRITE;
+		cmd |= (size == I2C_SMBUS_WORD_DATA
+				? swab16(data->word)
+				: data->byte);
+	}
+
+	ret = imc_channelpair_claim(priv, i);
+	if (ret)
+		return ret;
+
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(i), &cntl);
+	cntl &= ~SMBCNTL_DTI_MASK;
+	cntl |= ((u32)addr >> 3) << SMBCNTL_DTI_SHIFT;
+	pci_write_config_dword(priv->pci_dev, SMBCNTL(i), cntl);
+
+	cmd |= SMBCMD_TRIGGER;
+	pci_write_config_dword(priv->pci_dev, SMBCMD(i), cmd);
+
+	if (!imc_wait_for_transaction(priv, i, &stat)) {
+		dev_warn(&priv->pci_dev->dev, "smbus transaction did not complete.\n");
+		ret = -ETIMEDOUT;
+		goto xfer_out_release;
+	}
+
+#ifdef sanitycheck /* This is a young driver. Keep the checks for now */
+	pci_read_config_dword(priv->pci_dev, SMBCMD(i), &final_cmd);
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(i), &final_cntl);
+	if (((cmd ^ final_cmd) & SMBCMD_OUR_BITS) ||
+			((cntl ^ final_cntl) & SMBCNTL_OUR_BITS)) {
+		dev_err(&priv->pci_dev->dev,
+				"Access to channel pair %d-%d raced with hardware: cmd 0x%08X->0x%08X, cntl 0x%08X->0x%08X\n",
+				2*i, 2*i+1, cmd, final_cmd, cntl, final_cntl);
+		ret = -EIO;
+		goto xfer_out_release;
+	}
+#endif
+
+	if (stat & SMBSTAT_SBE) {
+		/*
+		 * While SBE is set hardware TSOD polling is disabled. This is
+		 * very bad as this bit is RO-V and will only be cleared after
+		 * a further software initiated transaction finishes
+		 * successfully.
+		 */
+		dev_err(&priv->pci_dev->dev,
+				"smbus error: sbe is set 0x%x\n", stat);
+		ret = -ENXIO;
+		goto xfer_out_release;
+	}
+
+	if (read_write == I2C_SMBUS_READ) {
+		if (!(stat & SMBSTAT_RDO)) {
+			dev_warn(&priv->pci_dev->dev,
+					"Unexpected read status 0x%08X\n", stat);
+			ret = -EIO;
+			goto xfer_out_release;
+		}
+		/*
+		 * The iMC SMBus controller thinks of SMBus words as being
+		 * big-endian (MSB first). Linux treats them as little-endian,
+		 * so we need to swap them.
+		 */
+		if (size == I2C_SMBUS_WORD_DATA)
+			data->word = swab16(stat & SMBSTAT_RDATA_MASK);
+		else
+			data->byte = stat & 0xFF;
+	} else {
+		if (!(stat & SMBSTAT_WOD)) {
+			dev_warn(&priv->pci_dev->dev,
+					"Unexpected write status 0x%08X\n", stat);
+			ret = -EIO;
+		}
+	}
+
+xfer_out_release:
+	imc_channelpair_release(priv, i);
+
+	return ret;
+}
+
+static const struct i2c_algorithm imc_smbus_algorithm = {
+	.smbus_xfer	= imc_smbus_xfer,
+	.functionality	= imc_func,
+};
+
+static void imc_instantiate_sensors(struct i2c_adapter *adapter, u8 presence)
+{
+	struct i2c_board_info info = {};
+
+	strcpy(info.type, DIMM_SENSOR_DRV);
+	info.addr = DIMM_SENSOR_BASE_ADR;
+
+	/*
+	 * Presence is a bit vector. Bits from right to left map into i2c slave
+	 * addresses starting 0x18.
+	 */
+	while (presence) {
+		if (presence & 0x1)
+			i2c_new_client_device(adapter, &info);
+		info.addr++;
+		presence >>= 1;
+	}
+}
+
+static int imc_init_channelpair(struct imc_priv *priv, int i, int socket)
+{
+	int err;
+	u32 val;
+	struct imc_channelpair *cp = &priv->channelpair[i];
+
+	i2c_set_adapdata(&cp->adapter, priv);
+	cp->adapter.owner = THIS_MODULE;
+	cp->adapter.algo = &imc_smbus_algorithm;
+	cp->adapter.dev.parent = &priv->pci_dev->dev;
+
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(i), &val);
+	cp->can_write = !(val & SMBCNTL_DIS_WRT);
+
+	/*
+	 * A TSOD polling interval of > 0 tells us if CLTT mode is enabled on
+	 * some channel pair.
+	 *
+	 * Is there a better way to check for CLTT mode? In particular, is
+	 * there a way to distingush the mode on a channel pair basis?
+	 */
+	cp->cltt = (priv->pcu.tsod_polling_interval  > 0);
+
+	snprintf(cp->adapter.name, sizeof(cp->adapter.name),
+			"iMC socket %d for channel pair %d-%d", socket, 2*i, 2*i+1);
+	err = i2c_add_adapter(&cp->adapter);
+	if (err)
+		return err;
+
+	/* For reasons unknown, TSOD_PRES_MASK is only set in CLTT mode. */
+	if (cp->cltt) {
+		dev_info(&priv->pci_dev->dev,
+				"CLTT is enabled on channel pair %d-%d. Thermal sensors will be automatically enabled\n",
+				2*i, 2*i+1);
+	} else {
+		dev_info(&priv->pci_dev->dev,
+				"CLTT is disabled on channel pair %d-%d. Thermal sensors need to be manually enabled\n",
+				2*i, 2*i+1);
+	}
+
+	imc_instantiate_sensors(&cp->adapter, val & SMBCNTL_TSOD_PRES_MASK);
+
+	return 0;
+}
+
+static void imc_free_channelpair(struct imc_priv *priv, int i)
+{
+	struct imc_channelpair *cp = &priv->channelpair[i];
+
+	i2c_del_adapter(&cp->adapter);
+}
+
+static struct pci_dev *imc_get_related_device(struct pci_bus *bus,
+		unsigned int devfn, u16 devid)
+{
+	struct pci_dev *dev = pci_get_slot(bus, devfn);
+
+	if (!dev)
+		return NULL;
+
+	if (dev->vendor != PCI_VENDOR_ID_INTEL || dev->device != devid) {
+		pci_dev_put(dev);
+		return NULL;
+	}
+	return dev;
+}
+
+static int imc_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int i, j, err;
+	struct imc_priv *priv;
+	struct pci_dev *sad;  /* System Address Decoder */
+	u32 sadcntl;
+
+	/* Sanity check. This device is always at 0x13.0 */
+	if (dev->devfn != PCI_DEVFN(0x13, 0))
+		return -ENODEV;
+
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->pci_dev = dev;
+	pci_set_drvdata(dev, priv);
+
+	/*
+	 * From sad, we learn the local node id of the socket.
+	 *
+	 * The socket will not change at runtime and so we throw away sad.
+	 */
+	sad = imc_get_related_device(dev->bus, PCI_DEVFN(0x0f, 5),
+			PCI_DEVICE_ID_INTEL_BROADWELL_IMC_SAD);
+	if (!sad) {
+		err = -ENODEV;
+		goto probe_out_free;
+	}
+	pci_read_config_dword(sad, SADCNTL, &sadcntl);
+	pci_dev_put(sad);
+
+	/*
+	 * From pcu, we access the CLTT polling interval.
+	 *
+	 * The polling interval is set by BIOS. We assume it will not change at
+	 * runtime and cache the initial value.
+	 */
+	priv->pcu.pci_dev = imc_get_related_device(dev->bus, PCI_DEVFN(0x1e, 1),
+			PCI_DEVICE_ID_INTEL_BROADWELL_IMC_PCU);
+	if (!priv->pcu.pci_dev) {
+		err = -ENODEV;
+		goto probe_out_free;
+	}
+	pci_read_config_dword(priv->pcu.pci_dev, TSODCNTL,
+			&priv->pcu.tsod_polling_interval);
+
+	mutex_init(&priv->pcu.mutex);
+
+	for (i = 0; i < 2; i++) {
+		err = imc_init_channelpair(priv, i,
+				sadcntl & SADCNTL_LOCAL_NODEID_MASK);
+		if (err)
+			goto probe_out_free_channelpair;
+	}
+
+	return 0;
+
+probe_out_free_channelpair:
+	for (j = 0; j < i; j++)
+		imc_free_channelpair(priv, j);
+
+	mutex_destroy(&priv->pcu.mutex);
+
+probe_out_free:
+	kfree(priv);
+	return err;
+}
+
+static void imc_remove(struct pci_dev *dev)
+{
+	int i;
+	struct imc_priv *priv = pci_get_drvdata(dev);
+
+	for (i = 0; i < 2; i++)
+		imc_free_channelpair(priv, i);
+
+	/* set tosd_control.tsod_polling_interval to initial value */
+	pci_write_config_dword(priv->pcu.pci_dev, TSODCNTL,
+			priv->pcu.tsod_polling_interval);
+
+	mutex_destroy(&priv->pcu.mutex);
+}
+
+static int imc_suspend(struct pci_dev *dev, pm_message_t mesg)
+{
+	struct imc_priv *priv = pci_get_drvdata(dev);
+
+	/* BIOS is in charge. We should finish any pending transaction */
+	priv->suspended = true;
+
+	return 0;
+}
+
+static int imc_resume(struct pci_dev *dev)
+{
+	struct imc_priv *priv = pci_get_drvdata(dev);
+
+	priv->suspended = false;
+
+	return 0;
+}
+
+static const struct pci_device_id imc_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_INTEL_BROADWELL_IMC_TA) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, imc_ids);
+
+static struct pci_driver imc_pci_driver = {
+	.name		= "imc_smbus",
+	.id_table	= imc_ids,
+	.probe		= imc_probe,
+	.remove		= imc_remove,
+	.suspend	= imc_suspend,
+	.resume		= imc_resume,
+};
+
+static int __init i2c_imc_init(void)
+{
+	return pci_register_driver(&imc_pci_driver);
+}
+module_init(i2c_imc_init);
+
+static void __exit i2c_imc_exit(void)
+{
+	pci_unregister_driver(&imc_pci_driver);
+}
+module_exit(i2c_imc_exit);
+
+MODULE_AUTHOR("Stefan Schaeckeler <sschaeck@cisco.com>");
+MODULE_DESCRIPTION("iMC SMBus driver");
+MODULE_LICENSE("GPL v2");
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_cpld.c b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_cpld.c
index a6c21966d1cf..e66d95a52290 100644
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_cpld.c
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_cpld.c
@@ -37,6 +37,7 @@ struct wistron_cpld_data {
 	int              reset[PORT_NUM];
 	int              lpmod[PORT_NUM];
 	int              modsel[PORT_NUM];
+	int              data_rdy[PORT_NUM];
 };
 
 static const struct i2c_device_id wistron_cpld_id[] = {
@@ -51,6 +52,7 @@ MODULE_DEVICE_TABLE(i2c, wistron_cpld_id);
 #define TRANSCEIVER_RESET_ATTR_ID(index)	MODULE_RESET_##index
 #define TRANSCEIVER_LPMOD_ATTR_ID(index)	MODULE_LPMOD_##index
 #define TRANSCEIVER_MODSEL_ATTR_ID(index)	MODULE_MODSEL_##index
+#define TRANSCEIVER_DATA_RDY_ATTR_ID(index)	MODULE_DATA_RDY_##index
 
 enum wistron_cpld_sysfs_attributes {
 	/* chip version */
@@ -189,6 +191,38 @@ enum wistron_cpld_sysfs_attributes {
 	TRANSCEIVER_MODSEL_ATTR_ID(30),
 	TRANSCEIVER_MODSEL_ATTR_ID(31),
 	TRANSCEIVER_MODSEL_ATTR_ID(32),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(1),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(2),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(3),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(4),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(5),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(6),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(7),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(8),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(9),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(10),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(11),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(12),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(13),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(14),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(15),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(16),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(17),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(18),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(19),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(20),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(21),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(22),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(23),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(24),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(25),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(26),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(27),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(28),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(29),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(30),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(31),
+	TRANSCEIVER_DATA_RDY_ATTR_ID(32),
 };
 
 /* sysfs attributes for hwmon */
@@ -204,6 +238,8 @@ static ssize_t get_mode_lpmod(struct device *dev, struct device_attribute *da, c
 static ssize_t set_mode_lpmod(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
 static ssize_t get_mode_modsel(struct device *dev, struct device_attribute *da, char *buf);
 static ssize_t set_mode_modsel(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
+static ssize_t get_mode_data_rdy(struct device *dev, struct device_attribute *da, char *buf);
+static ssize_t set_mode_data_rdy(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
 
 /* version */
 static SENSOR_DEVICE_ATTR(version, S_IWUSR | S_IRUGO, get_version, set_version, CPLD_VERSION);
@@ -234,6 +270,10 @@ static SENSOR_DEVICE_ATTR(psu_led,  S_IWUSR | S_IRUGO, get_led_status, set_led_s
 	static SENSOR_DEVICE_ATTR(port##index##_modsel, S_IWUSR | S_IRUGO, get_mode_modsel, set_mode_modsel, MODULE_MODSEL_##index)
 #define DECLARE_TRANSCEIVER_MODSEL_ATTR(index)  &sensor_dev_attr_port##index##_modsel.dev_attr.attr
 
+#define DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(index) \
+	static SENSOR_DEVICE_ATTR(port##index##_data_rdy, S_IWUSR | S_IRUGO, get_mode_data_rdy, set_mode_data_rdy, MODULE_DATA_RDY_##index)
+#define DECLARE_TRANSCEIVER_DATA_RDY_ATTR(index)  &sensor_dev_attr_port##index##_data_rdy.dev_attr.attr
+
 /* transceiver attributes */
 DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(1);
 DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(2);
@@ -363,6 +403,38 @@ DECLARE_TRANSCEIVER_SENSOR_DEVICE_MODSEL_ATTR(29);
 DECLARE_TRANSCEIVER_SENSOR_DEVICE_MODSEL_ATTR(30);
 DECLARE_TRANSCEIVER_SENSOR_DEVICE_MODSEL_ATTR(31);
 DECLARE_TRANSCEIVER_SENSOR_DEVICE_MODSEL_ATTR(32);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(1);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(2);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(3);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(4);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(5);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(6);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(7);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(8);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(9);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(10);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(11);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(12);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(13);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(14);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(15);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(16);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(17);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(18);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(19);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(20);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(21);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(22);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(23);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(24);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(25);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(26);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(27);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(28);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(29);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(30);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(31);
+DECLARE_TRANSCEIVER_SENSOR_DEVICE_DATA_RDY_ATTR(32);
 
 static struct attribute *wistron_fpga_attributes[] = {
 	&sensor_dev_attr_version.dev_attr.attr,
@@ -443,6 +515,22 @@ static struct attribute *wistron_cpld1_attributes[] = {
 	DECLARE_TRANSCEIVER_MODSEL_ATTR(14),
 	DECLARE_TRANSCEIVER_MODSEL_ATTR(15),
 	DECLARE_TRANSCEIVER_MODSEL_ATTR(16),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(1),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(2),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(3),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(4),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(5),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(6),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(7),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(8),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(9),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(10),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(11),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(12),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(13),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(14),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(15),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(16),
 	NULL
 };
 
@@ -516,6 +604,22 @@ static struct attribute *wistron_cpld2_attributes[] = {
 	DECLARE_TRANSCEIVER_MODSEL_ATTR(30),
 	DECLARE_TRANSCEIVER_MODSEL_ATTR(31),
 	DECLARE_TRANSCEIVER_MODSEL_ATTR(32),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(17),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(18),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(19),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(20),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(21),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(22),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(23),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(24),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(25),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(26),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(27),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(28),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(29),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(30),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(31),
+	DECLARE_TRANSCEIVER_DATA_RDY_ATTR(32),
 	NULL
 };
 
@@ -758,6 +862,43 @@ static ssize_t set_mode_modsel(struct device *dev, struct device_attribute *da,
 	return count;
 }
 
+static ssize_t get_mode_data_rdy(struct device *dev, struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute  *attr = to_sensor_dev_attr(da);
+	struct i2c_client               *client = to_i2c_client(dev);
+	struct wistron_cpld_data    	*data = i2c_get_clientdata(client);
+	int                             update_idx, data_rdy = 0;
+
+	update_idx = attr->index - MODULE_DATA_RDY_1;
+
+	mutex_lock(&data->lock);
+	data_rdy = data->data_rdy[update_idx];
+	mutex_unlock(&data->lock);
+
+	return sprintf(buf, "%d", data_rdy);
+}
+
+static ssize_t set_mode_data_rdy(struct device *dev, struct device_attribute *da, const char *buf, size_t count)
+{
+	struct sensor_device_attribute  *attr = to_sensor_dev_attr(da);
+	struct i2c_client               *client = to_i2c_client(dev);
+	struct wistron_cpld_data     *data = i2c_get_clientdata(client);
+	int                             error, data_rdy;
+	int                             update_idx;
+
+	error = kstrtoint(buf, 10, &data_rdy);
+	if (error)
+		return error;
+
+	update_idx = attr->index - MODULE_DATA_RDY_1;
+
+	mutex_lock(&data->lock);
+	data->data_rdy[update_idx] = data_rdy;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
 static void wistron_cpld_add_client(struct i2c_client *client)
 {
 	struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL);
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_oom.c b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_oom.c
index 4236373499b2..0ad2e2ca1ae0 100644
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_oom.c
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_oom.c
@@ -10,19 +10,56 @@
 #include <linux/delay.h>
 #include <linux/dmi.h>
 
-/* QSFP-DD: page0 (low page + high page (128+128 byte)), page 2 (high page (128 byte)), page11 (high page (128 byte))*/
+#define QSFP28_TYPE	0x11
+#define QSFP_DD_TYPE	0x18
+
+#define LOWER_PAGE_OFFSET	0x0
+#define PAGE0_OFFSET	0x80
+#define PAGE1_OFFSET	0x0
+#define PAGE2_OFFSET	0x80
+#define PAGE3_OFFSET	0x0
+#define PAGE10_OFFSET	0x80
+#define PAGE11_OFFSET	0x100
+
+#define QSFP_DD_CHAN_MON_OFFSET	0x1a
+#define QSFP_DD_TEMP_OFFSET	0xe
+#define QSFP_DD_VOLT_OFFSET	0x10
+#define QSFP_DD_RX_LOS_OFFSET	0x13
+#define QSFP_DD_TX_FAULT_OFFSET	0x7
+#define QSFP_DD_DISABLE_OFFSET	0x2
+
+#define QSFP28_DOM_BULK_DATA_OFFSET	0x16
+#define QSFP28_RX_LOS_OFFSET	0x3
+#define QSFP28_TX_FAULT_OFFSET	0x4
+#define QSFP28_DISABLE_OFFSET	0x56
+
+
+/* QSFP-DD: page0 (low page + high page (128+128 byte)), page 1/2/3/10/11 (high page (128 byte))*/
 #define EEPROM_DATA_SIZE        256
+#define EEPROM3_DATA_SIZE        384
 
 /* Addresses scanned */
 static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
 #define MAX_PORT_NAME_LEN       20
+#define TEMP_DATA_SIZE	2
+#define VOLT_DATA_SIZE	2
+#define QSFP_DD_CHAN_MON_DATA_SIZE	0x30
+#define QSFP_DOM_BULK_DATA_SIZE	0x24
 
-enum sysfs_fan_attributes {
+enum sysfs_oom_attributes {
 	OOM_LP_MODE,
 	OOM_TEMP,
 	OOM_EEPROM1,
 	OOM_EEPROM2,
+	OOM_EEPROM3,
 	OOM_PORT_NAME,
+	OOM_TEMP_E,
+	OOM_VOLT_E,
+	OOM_QSFPDD_CHAN_MON,
+	OOM_QSFP_DOM_BULK,
+	OOM_CHAN_RX_LOS,
+	OOM_CHAN_TX_FAULT,
+	OOM_CHAN_DISABLE,
 	OOM_ATTR_MAX
 };
 
@@ -35,7 +72,16 @@ struct wistron_oom_data {
 	int             temp;
 	unsigned char   eeprom1[EEPROM_DATA_SIZE];
 	unsigned char   eeprom2[EEPROM_DATA_SIZE];
+	unsigned char   eeprom3[EEPROM3_DATA_SIZE];
 	char            port_name[MAX_PORT_NAME_LEN];
+
+	unsigned char	qsfp_dd_chan_mon[QSFP_DD_CHAN_MON_DATA_SIZE];
+	unsigned char	qsfp_dom_bulk[QSFP_DOM_BULK_DATA_SIZE];
+	unsigned char	tempe[TEMP_DATA_SIZE];
+	unsigned char	volte[VOLT_DATA_SIZE];
+	int				rx_los;
+	int				tx_fault;
+	int				disable;
 };
 
 /* sysfs attributes for hwmon */
@@ -45,20 +91,46 @@ static ssize_t get_oom_info1(struct device *dev, struct device_attribute *da, ch
 static ssize_t set_oom_info1(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
 static ssize_t get_oom_info2(struct device *dev, struct device_attribute *da, char *buf);
 static ssize_t set_oom_info2(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
+static ssize_t get_oom_info3(struct device *dev, struct device_attribute *da, char *buf);
+static ssize_t set_oom_info3(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
 static ssize_t get_port_name(struct device *dev, struct device_attribute *da, char *buf);
 static ssize_t set_port_name(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
+static ssize_t get_t_v_e(struct device *dev, struct device_attribute *da, char *buf);
+static ssize_t set_t_v_e(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
+static ssize_t get_qsfp_dd_chan_mon(struct device *dev, struct device_attribute *da, char *buf);
+static ssize_t set_qsfp_dd_chan_mon(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
+static ssize_t get_qsfp_dom_bulk(struct device *dev, struct device_attribute *da, char *buf);
+static ssize_t set_qsfp_dom_bulk(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
+
+
 static SENSOR_DEVICE_ATTR(lp_mode, S_IWUSR | S_IRUGO, get_oom_value, set_oom_value, OOM_LP_MODE);
 static SENSOR_DEVICE_ATTR(temp, S_IWUSR | S_IRUGO, get_oom_value, set_oom_value, OOM_TEMP);
 static SENSOR_DEVICE_ATTR(eeprom1, S_IWUSR | S_IRUGO, get_oom_info1, set_oom_info1, OOM_EEPROM1);
 static SENSOR_DEVICE_ATTR(eeprom2, S_IWUSR | S_IRUGO, get_oom_info2, set_oom_info2, OOM_EEPROM2);
+static SENSOR_DEVICE_ATTR(eeprom3, S_IWUSR | S_IRUGO, get_oom_info3, set_oom_info3, OOM_EEPROM3);
 static SENSOR_DEVICE_ATTR(port_name, S_IRUGO | S_IWUSR, get_port_name, set_port_name, OOM_PORT_NAME);
+static SENSOR_DEVICE_ATTR(qsfp_dd_chan_mon, S_IWUSR | S_IRUGO, get_qsfp_dd_chan_mon, set_qsfp_dd_chan_mon, OOM_QSFPDD_CHAN_MON);
+static SENSOR_DEVICE_ATTR(qsfp_dom_bulk, S_IWUSR | S_IRUGO, get_qsfp_dom_bulk, set_qsfp_dom_bulk, OOM_QSFP_DOM_BULK);
+static SENSOR_DEVICE_ATTR(tempe, S_IWUSR | S_IRUGO, get_t_v_e, set_t_v_e, OOM_TEMP_E);
+static SENSOR_DEVICE_ATTR(volte, S_IWUSR | S_IRUGO, get_t_v_e, set_t_v_e, OOM_VOLT_E);
+static SENSOR_DEVICE_ATTR(rx_los, S_IWUSR | S_IRUGO, get_oom_value, set_oom_value, OOM_CHAN_RX_LOS);
+static SENSOR_DEVICE_ATTR(tx_fault, S_IWUSR | S_IRUGO, get_oom_value, set_oom_value, OOM_CHAN_TX_FAULT);
+static SENSOR_DEVICE_ATTR(disable, S_IWUSR | S_IRUGO, get_oom_value, set_oom_value, OOM_CHAN_DISABLE);
 
 static struct attribute *wistron_oom_attributes[] = {
 	&sensor_dev_attr_lp_mode.dev_attr.attr,
 	&sensor_dev_attr_temp.dev_attr.attr,
 	&sensor_dev_attr_eeprom1.dev_attr.attr,
 	&sensor_dev_attr_eeprom2.dev_attr.attr,
+	&sensor_dev_attr_eeprom3.dev_attr.attr,
 	&sensor_dev_attr_port_name.dev_attr.attr,
+	&sensor_dev_attr_qsfp_dd_chan_mon.dev_attr.attr,
+	&sensor_dev_attr_qsfp_dom_bulk.dev_attr.attr,
+	&sensor_dev_attr_tempe.dev_attr.attr,
+	&sensor_dev_attr_volte.dev_attr.attr,
+	&sensor_dev_attr_rx_los.dev_attr.attr,
+	&sensor_dev_attr_tx_fault.dev_attr.attr,
+	&sensor_dev_attr_disable.dev_attr.attr,
 	NULL
 };
 
@@ -70,10 +142,27 @@ static ssize_t get_oom_value(struct device *dev, struct device_attribute *da, ch
 	int                             value = 0;
 
 	mutex_lock(&data->lock);
-	if (attr->index == OOM_LP_MODE)
-		value = data->lp_mode;
-	else
-		value = data->temp;
+	switch (attr->index) {
+		case OOM_LP_MODE:
+			value = data->lp_mode;
+			break;
+		case OOM_TEMP:
+			value = data->temp;
+			break;
+		case OOM_CHAN_RX_LOS:
+			value = data->rx_los;
+			break;
+		case OOM_CHAN_TX_FAULT:
+			value = data->tx_fault;
+			break;
+		case OOM_CHAN_DISABLE:
+			value = data->disable;
+			break;
+		default:
+			value = data->temp;
+			break;
+
+	}
 
 	mutex_unlock(&data->lock);
 	return sprintf(buf, "%d", value);
@@ -93,10 +182,38 @@ static ssize_t set_oom_value(struct device *dev, struct device_attribute *da, co
 	}
 
 	mutex_lock(&data->lock);
-	if (attr->index == OOM_LP_MODE)
-		data->lp_mode = value;
-	else
-		data->temp = value;
+	switch (attr->index) {
+		case OOM_LP_MODE:
+			data->lp_mode = value;
+			break;
+		case OOM_TEMP:
+			data->temp = value;
+			break;
+		case OOM_CHAN_RX_LOS:
+			data->rx_los = value;
+			if (data->eeprom1[0] == QSFP_DD_TYPE)
+				data->eeprom3[PAGE11_OFFSET + QSFP_DD_RX_LOS_OFFSET] = value;
+			if (data->eeprom1[0] == QSFP28_TYPE)
+				data->eeprom1[LOWER_PAGE_OFFSET + QSFP28_RX_LOS_OFFSET] = value;
+			break;
+		case OOM_CHAN_TX_FAULT:
+			data->tx_fault = value;
+			if (data->eeprom1[0] == QSFP_DD_TYPE)
+				data->eeprom3[PAGE11_OFFSET + QSFP_DD_TX_FAULT_OFFSET] = value;
+			if (data->eeprom1[0] == QSFP28_TYPE)
+				data->eeprom1[LOWER_PAGE_OFFSET + QSFP28_TX_FAULT_OFFSET] = value;
+			break;
+		case OOM_CHAN_DISABLE:
+			data->disable = value;
+			if (data->eeprom1[0] == QSFP_DD_TYPE)
+				data->eeprom3[PAGE10_OFFSET + QSFP_DD_DISABLE_OFFSET] = value;
+			if (data->eeprom1[0] == QSFP28_TYPE)
+				data->eeprom1[LOWER_PAGE_OFFSET + QSFP28_DISABLE_OFFSET] = value;
+			break;
+		default:
+			data->temp = value;
+			break;
+	}
 
 	mutex_unlock(&data->lock);
 	return count;
@@ -123,8 +240,8 @@ static ssize_t set_oom_info1(struct device *dev, struct device_attribute *da, co
 	unsigned int                val;
 
 	mutex_lock(&data->lock);
-	memset(data->eeprom1, 0xFF, EEPROM_DATA_SIZE);
-	memset(str, 0x0, 3);
+	memzero_explicit(data->eeprom1, EEPROM_DATA_SIZE);
+	memzero_explicit(str, sizeof(str));
 
 	if (strlen(buf) >= EEPROM_DATA_SIZE) {
 		for (i=0; i < strlen(buf) ; i++) {
@@ -170,8 +287,8 @@ static ssize_t set_oom_info2(struct device *dev, struct device_attribute *da, co
 	unsigned int                val;
 
 	mutex_lock(&data->lock);
-	memset(data->eeprom2, 0xFF, EEPROM_DATA_SIZE);
-	memset(str, 0x0, 3);
+	memzero_explicit(data->eeprom2, EEPROM_DATA_SIZE);
+	memzero_explicit(str, sizeof(str));
 
 	if (strlen(buf) >= EEPROM_DATA_SIZE) {
 		for (i = 0; i < strlen(buf) ; i++) {
@@ -195,6 +312,52 @@ static ssize_t set_oom_info2(struct device *dev, struct device_attribute *da, co
 	return size;
 }
 
+static ssize_t get_oom_info3(struct device *dev, struct device_attribute *da, char *buf)
+{
+	struct i2c_client           *client = to_i2c_client(dev);
+	struct wistron_oom_data  	*data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->lock);
+	memcpy(buf, data->eeprom3, EEPROM3_DATA_SIZE);
+	mutex_unlock(&data->lock);
+
+	return EEPROM3_DATA_SIZE;
+}
+
+static ssize_t set_oom_info3(struct device *dev, struct device_attribute *da, const char *buf, size_t size)
+{
+	struct i2c_client           *client = to_i2c_client(dev);
+	struct wistron_oom_data  	*data = i2c_get_clientdata(client);
+	int                         i = 0, j = 0, k = 0;
+	unsigned char               str[3];
+	unsigned int                val;
+
+	mutex_lock(&data->lock);
+	memzero_explicit(data->eeprom3, EEPROM3_DATA_SIZE);
+	memzero_explicit(str, sizeof(str));
+
+	if (strlen(buf) >= EEPROM3_DATA_SIZE) {
+		for (i = 0; i < strlen(buf) ; i++) {
+			for (j = 0; j < 2; j++) {
+				str[j] = buf[i + j];
+			}
+
+			sscanf(str, "%x", &val);
+
+			i = j + i - 1;
+			if (k >= EEPROM3_DATA_SIZE)
+				break;
+
+			data->eeprom3[k]=(unsigned char)val;
+			k++;
+		}
+	}
+
+	mutex_unlock(&data->lock);
+
+	return size;
+}
+
 static ssize_t get_port_name(struct device *dev, struct device_attribute *da, char *buf)
 {
 	struct i2c_client           *client = to_i2c_client(dev);
@@ -224,6 +387,191 @@ static ssize_t set_port_name(struct device *dev, struct device_attribute *da, co
 	return count;
 }
 
+static ssize_t get_t_v_e(struct device *dev, struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute  *attr = to_sensor_dev_attr(da);
+	struct i2c_client           *client = to_i2c_client(dev);
+	struct wistron_oom_data  	*data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->lock);
+	if (attr->index == OOM_TEMP_E)
+		memcpy(buf, data->tempe, TEMP_DATA_SIZE);
+	else
+		memcpy(buf, data->volte, VOLT_DATA_SIZE);
+	mutex_unlock(&data->lock);
+
+	return (attr->index == OOM_TEMP_E) ? TEMP_DATA_SIZE : VOLT_DATA_SIZE;
+}
+
+static ssize_t set_t_v_e(struct device *dev, struct device_attribute *da, const char *buf, size_t size)
+{
+	struct sensor_device_attribute  *attr = to_sensor_dev_attr(da);
+	struct i2c_client           *client = to_i2c_client(dev);
+	struct wistron_oom_data  	*data = i2c_get_clientdata(client);
+	int                         i = 0, j = 0, k = 0;
+	unsigned char               str[3];
+	unsigned int                val;
+
+	mutex_lock(&data->lock);
+	if (attr->index == OOM_TEMP_E) {
+		memzero_explicit(data->tempe, TEMP_DATA_SIZE);
+		memzero_explicit(str, sizeof(str));
+
+		if (strlen(buf) >= TEMP_DATA_SIZE) {
+			for (i = 0; i < strlen(buf) ; i++) {
+				for (j = 0; j < 2; j++) {
+					str[j] = buf[i + j];
+				}
+
+				sscanf(str, "%x", &val);
+
+				i = j + i - 1;
+				if (k >= TEMP_DATA_SIZE)
+					break;
+
+				data->tempe[k]=(unsigned char)val;
+
+				if (k == 0)
+					data->temp = data->tempe[k];
+				k++;
+			}
+		}
+
+		if (data->eeprom1[0] == QSFP_DD_TYPE)
+			memcpy(&data->eeprom1[LOWER_PAGE_OFFSET + QSFP_DD_TEMP_OFFSET], data->tempe, TEMP_DATA_SIZE);
+	}
+	else {
+		memzero_explicit(data->volte, VOLT_DATA_SIZE);
+		memzero_explicit(str, sizeof(str));
+
+		if (strlen(buf) >= VOLT_DATA_SIZE) {
+			for (i = 0; i < strlen(buf) ; i++) {
+				for (j = 0; j < 2; j++) {
+					str[j] = buf[i + j];
+				}
+
+				sscanf(str, "%x", &val);
+
+				i = j + i - 1;
+				if (k >= VOLT_DATA_SIZE)
+					break;
+
+				data->volte[k]=(unsigned char)val;
+				k++;
+			}
+		}
+
+		if (data->eeprom1[0] == QSFP_DD_TYPE)
+			memcpy(&data->eeprom1[LOWER_PAGE_OFFSET + QSFP_DD_VOLT_OFFSET], data->volte, VOLT_DATA_SIZE);
+	}
+
+	mutex_unlock(&data->lock);
+
+	return size;
+}
+
+static ssize_t get_qsfp_dd_chan_mon(struct device *dev, struct device_attribute *da, char *buf)
+{
+	struct i2c_client           *client = to_i2c_client(dev);
+	struct wistron_oom_data  	*data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->lock);
+	memcpy(buf, data->qsfp_dd_chan_mon, QSFP_DD_CHAN_MON_DATA_SIZE);
+	mutex_unlock(&data->lock);
+
+	return QSFP_DD_CHAN_MON_DATA_SIZE;
+}
+
+static ssize_t set_qsfp_dd_chan_mon(struct device *dev, struct device_attribute *da, const char *buf, size_t size)
+{
+	struct i2c_client           *client = to_i2c_client(dev);
+	struct wistron_oom_data  	*data = i2c_get_clientdata(client);
+	int                         i = 0, j = 0, k = 0;
+	unsigned char               str[3];
+	unsigned int                val;
+
+	mutex_lock(&data->lock);
+	memzero_explicit(data->qsfp_dd_chan_mon, QSFP_DD_CHAN_MON_DATA_SIZE);
+	memzero_explicit(str, sizeof(str));
+
+	if (strlen(buf) >= QSFP_DD_CHAN_MON_DATA_SIZE) {
+		for (i=0; i < strlen(buf) ; i++) {
+			for (j = 0; j < 2; j++) {
+				str[j] = buf[i + j];
+			}
+
+			sscanf(str, "%x", &val);
+
+			i = j + i - 1;
+
+			if (k >= QSFP_DD_CHAN_MON_DATA_SIZE)
+				break;
+
+			data->qsfp_dd_chan_mon[k] = (unsigned char)val;
+			k++;
+		}
+	}
+
+	if (data->eeprom1[0] == QSFP_DD_TYPE)
+		memcpy(&data->eeprom3[PAGE11_OFFSET + QSFP_DD_CHAN_MON_OFFSET], data->qsfp_dd_chan_mon, QSFP_DD_CHAN_MON_DATA_SIZE);
+
+	mutex_unlock(&data->lock);
+
+	return size;
+}
+
+static ssize_t get_qsfp_dom_bulk(struct device *dev, struct device_attribute *da, char *buf)
+{
+	struct i2c_client           *client = to_i2c_client(dev);
+	struct wistron_oom_data  	*data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->lock);
+	memcpy(buf, data->qsfp_dom_bulk, QSFP_DOM_BULK_DATA_SIZE);
+	mutex_unlock(&data->lock);
+
+	return QSFP_DOM_BULK_DATA_SIZE;
+}
+
+static ssize_t set_qsfp_dom_bulk(struct device *dev, struct device_attribute *da, const char *buf, size_t size)
+{
+	struct i2c_client           *client = to_i2c_client(dev);
+	struct wistron_oom_data  	*data = i2c_get_clientdata(client);
+	int                         i = 0, j = 0, k = 0;
+	unsigned char               str[3];
+	unsigned int                val;
+
+	mutex_lock(&data->lock);
+	memzero_explicit(data->qsfp_dom_bulk, QSFP_DOM_BULK_DATA_SIZE);
+	memzero_explicit(str, sizeof(str));
+
+	if (strlen(buf) >= QSFP_DOM_BULK_DATA_SIZE) {
+		for (i=0; i < strlen(buf) ; i++) {
+			for (j = 0; j < 2; j++) {
+				str[j] = buf[i + j];
+			}
+
+			sscanf(str, "%x", &val);
+
+			i = j + i - 1;
+
+			if (k >= QSFP_DOM_BULK_DATA_SIZE)
+				break;
+
+			data->qsfp_dom_bulk[k] = (unsigned char)val;
+			k++;
+		}
+	}
+
+	if (data->eeprom1[0] == QSFP28_TYPE) {
+		memcpy(&data->eeprom1[LOWER_PAGE_OFFSET + QSFP28_DOM_BULK_DATA_OFFSET], data->qsfp_dom_bulk, QSFP_DOM_BULK_DATA_SIZE);
+		data->temp = data->qsfp_dom_bulk[0];
+	}
+
+	mutex_unlock(&data->lock);
+
+	return size;
+}
+
 static const struct attribute_group wistron_oom_group = {
 	.attrs = wistron_oom_attributes,
 };
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_psu.c b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_psu.c
index 1ea7764dd430..fa48e9ce5d41 100644
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_psu.c
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_psu.c
@@ -21,6 +21,7 @@ static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
 #define MFR_VENDOR_NAME_LENGTH	16
 #define MFR_MODEL_NAME_LENGTH	16
 #define MFR_SERIAL_NUM_LENGTH	32
+#define MFR_REV_LENGTH	10
 
 /* Each client has this additional data */
 struct wistron_psu_data {
@@ -33,13 +34,15 @@ struct wistron_psu_data {
 	int              v_out;
 	int              i_in;
 	int              i_out;
-	int              p_in;
-	int              p_out;
+	long             p_in;
+	long             p_out;
 	int              temp_input;
+	int              pwm;
 	int              fault;
 	u8               mfr_id[MFR_VENDOR_NAME_LENGTH];
 	u8               mfr_model[MFR_MODEL_NAME_LENGTH];
 	u8               mfr_serial[MFR_SERIAL_NUM_LENGTH];
+	u8               mfr_rev[MFR_REV_LENGTH];
 };
 
 enum psu_index {
@@ -57,10 +60,12 @@ enum wistron_psu_sysfs_attributes {
 	PSU_P_IN,
 	PSU_P_OUT,
 	PSU_TEMP1_INPUT,
+	PSU_PWM,
 	PSU_FAULT,
 	PSU_MFR_ID,
 	PSU_MFR_MODEL,
 	PSU_MFR_SERIAL,
+	PSU_MFR_REV,
 };
 
 /* sysfs attributes for hwmon */
@@ -73,10 +78,12 @@ static SENSOR_DEVICE_ATTR(curr2_input,   S_IWUSR | S_IRUGO, get_value,  set_valu
 static SENSOR_DEVICE_ATTR(power1_input,  S_IWUSR | S_IRUGO, get_value,  set_value, PSU_P_IN);
 static SENSOR_DEVICE_ATTR(power2_input,  S_IWUSR | S_IRUGO, get_value,  set_value, PSU_P_OUT);
 static SENSOR_DEVICE_ATTR(temp1_input,   S_IWUSR | S_IRUGO, get_value,  set_value, PSU_TEMP1_INPUT);
+static SENSOR_DEVICE_ATTR(pwm,   S_IWUSR | S_IRUGO, get_value,  set_value, PSU_PWM);
 static SENSOR_DEVICE_ATTR(fault,		 S_IWUSR | S_IRUGO, get_value,  set_value, PSU_FAULT);
 static SENSOR_DEVICE_ATTR(vendor,        S_IWUSR | S_IRUGO, get_value,  set_value, PSU_MFR_ID);
 static SENSOR_DEVICE_ATTR(model,     	 S_IWUSR | S_IRUGO, get_value,  set_value, PSU_MFR_MODEL);
 static SENSOR_DEVICE_ATTR(sn,   		 S_IWUSR | S_IRUGO, get_value,  set_value, PSU_MFR_SERIAL);
+static SENSOR_DEVICE_ATTR(rev,   		 S_IWUSR | S_IRUGO, get_value,  set_value, PSU_MFR_REV);
 
 
 static struct attribute *wistron_psu_attributes[] = {
@@ -89,10 +96,12 @@ static struct attribute *wistron_psu_attributes[] = {
 	&sensor_dev_attr_power1_input.dev_attr.attr,
 	&sensor_dev_attr_power2_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_pwm.dev_attr.attr,
 	&sensor_dev_attr_fault.dev_attr.attr,
 	&sensor_dev_attr_vendor.dev_attr.attr,
 	&sensor_dev_attr_model.dev_attr.attr,
 	&sensor_dev_attr_sn.dev_attr.attr,
+	&sensor_dev_attr_rev.dev_attr.attr,
 	NULL
 };
 
@@ -162,14 +171,17 @@ static ssize_t get_value(struct device *dev, struct device_attribute *da, char *
 			ret_count = sprintf(buf, "%d", data->i_out);
 			break;
 		case PSU_P_IN:
-			ret_count = sprintf(buf, "%d", data->p_in);
+			ret_count = sprintf(buf, "%ld", data->p_in);
 			break;
 		case PSU_P_OUT:
-			ret_count = sprintf(buf, "%d", data->p_out);
+			ret_count = sprintf(buf, "%ld", data->p_out);
 			break;
 		case PSU_TEMP1_INPUT:
 			ret_count = sprintf(buf, "%d", data->temp_input);
 			break;
+		case PSU_PWM:
+			ret_count = sprintf(buf, "%d", data->pwm);
+			break;
 		case PSU_FAULT:
 			ret_count = sprintf(buf, "%d", data->fault);
 			break;
@@ -182,6 +194,9 @@ static ssize_t get_value(struct device *dev, struct device_attribute *da, char *
 		case PSU_MFR_SERIAL:
 			ret_count = sprintf(buf, "%s", data->mfr_serial);
 			break;
+		case PSU_MFR_REV:
+			ret_count = sprintf(buf, "%s", data->mfr_rev);
+			break;
 		default:
 			break;
 	}
@@ -222,12 +237,12 @@ static ssize_t set_value(struct device *dev, struct device_attribute *da, const
 				goto exit_err;
 			break;
 		case PSU_P_IN:
-			error = kstrtoint(buf, 10, &data->p_in);
+			error = kstrtol(buf, 10, &data->p_in);
 			if (error)
 				goto exit_err;
 			break;
 		case PSU_P_OUT:
-			error = kstrtoint(buf, 10, &data->p_out);
+			error = kstrtol(buf, 10, &data->p_out);
 			if (error)
 				goto exit_err;
 			break;
@@ -236,23 +251,32 @@ static ssize_t set_value(struct device *dev, struct device_attribute *da, const
 			if (error)
 				goto exit_err;
 			break;
+		case PSU_PWM:
+			error = kstrtoint(buf, 10, &data->pwm);
+			if (error)
+				goto exit_err;
+			break;
 		case PSU_FAULT:
 			error = kstrtoint(buf, 10, &data->fault);
 			if (error)
 				goto exit_err;
 			break;
 		case PSU_MFR_ID:
-			memset(&data->mfr_id, 0x0, sizeof(data->mfr_id));
+			memzero_explicit(&data->mfr_id, sizeof(data->mfr_id));
 			strncpy(data->mfr_id, buf, sizeof(data->mfr_id) - 1);
 			break;
 		case PSU_MFR_MODEL:
-			memset(&data->mfr_model, 0x0, sizeof(data->mfr_model));
+			memzero_explicit(&data->mfr_model, sizeof(data->mfr_model));
 			strncpy(data->mfr_model, buf, sizeof(data->mfr_model) - 1);
 			break;
 		case PSU_MFR_SERIAL:
-			memset(&data->mfr_serial, 0x0, sizeof(data->mfr_serial));
+			memzero_explicit(&data->mfr_serial, sizeof(data->mfr_serial));
 			strncpy(data->mfr_serial, buf, sizeof(data->mfr_serial) - 1);
 			break;
+		case PSU_MFR_REV:
+			memzero_explicit(&data->mfr_rev, sizeof(data->mfr_rev));
+			strncpy(data->mfr_rev, buf, sizeof(data->mfr_rev) - 1);
+			break;
 		default:
 			break;
 	}
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_syseeprom.c b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_syseeprom.c
index a281df719677..578aa3c1d5ef 100644
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_syseeprom.c
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/modules/wistron_6512_32r_syseeprom.c
@@ -43,8 +43,8 @@ static ssize_t set_syseeprom(struct device *dev, struct device_attribute *da, co
 	unsigned int val;
 
 	mutex_lock(&data->lock);
-	memset(data->eeprom, 0xFF, EEPROM_DATA_SIZE);
-	memset(str, 0x0, 3);
+	memzero_explicit(data->eeprom, EEPROM_DATA_SIZE);
+	memzero_explicit(str, sizeof(str));
 
 	if (strlen(buf) >= EEPROM_DATA_SIZE) {
 		for (i = 0; i < strlen(buf) ; i++) {
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/service/6512-32r-firmware_ver.service b/platform/innovium/sonic-platform-modules-wistron/6512-32r/service/6512-32r-firmware_ver.service
new file mode 100644
index 000000000000..42a4d4e50f61
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/service/6512-32r-firmware_ver.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Wistron 6512-32R Platform firmware version service
+After=platform-modules-6512-32r.service
+DefaultDependencies=no
+
+[Service]
+Type=oneshot
+ExecStart=/usr/local/bin/platform_firmware_version
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/service/6512-32r-platform.service b/platform/innovium/sonic-platform-modules-wistron/6512-32r/service/6512-32r-platform.service
index 1842d036cda4..ab8effcc4096 100644
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/service/6512-32r-platform.service
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/service/6512-32r-platform.service
@@ -1,7 +1,6 @@
 [Unit]
 Description=Wistron 6512-32R Platform Monitoring service
-Before=pmon.service
-After=sysinit.target
+After=platform-modules-6512-32r.service
 DefaultDependencies=no
 
 [Service]
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/setup.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/setup.py
index 3c2888412e90..3b92de8c129c 100644
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/setup.py
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/setup.py
@@ -1,7 +1,5 @@
 from setuptools import setup
 
-DEVICE_NAME = 'wistron'
-HW_SKU = 'x86_64-wistron_6512_32r-r0'
 
 setup(
     name='sonic-platform',
@@ -16,9 +14,8 @@
     packages=[
         'sonic_platform',
     ],
-    package_dir={
-        'sonic_platform': '../../../../device/{}/{}/sonic_platform'.format(DEVICE_NAME, HW_SKU)},
-    classifiers=[
+   package_dir={'sonic_platform': 'sonic_platform'},
+   classifiers=[
         'Development Status :: 3 - Alpha',
         'Environment :: Plugins',
         'Intended Audience :: Developers',
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/__init__.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/__init__.py
old mode 100644
new mode 100755
similarity index 70%
rename from device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/__init__.py
rename to platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/__init__.py
index 29dfc92139ef..cc568450a400
--- a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/__init__.py
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/__init__.py
@@ -1,2 +1,2 @@
-__all__ = ['chassis', 'eeprom', 'platform', 'psu', 'sfp', 'thermal', 'fan', 'watchdog']
+__all__ = ['chassis', 'eeprom', 'platform', 'psu', 'sfp', 'thermal', 'fan', 'component', 'watchdog']
 from . import platform
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/chassis.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/chassis.py
old mode 100644
new mode 100755
similarity index 55%
rename from device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/chassis.py
rename to platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/chassis.py
index 232ca0ca5fe3..d27b26b98f62
--- a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/chassis.py
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/chassis.py
@@ -8,7 +8,6 @@
 #############################################################################
 try:
     import sys
-    import os
     import time
     import subprocess
     from sonic_platform_base.chassis_base import ChassisBase
@@ -16,16 +15,19 @@
     raise ImportError(str(e) + "- required module not found")
 
 NUM_FAN = 14
+NUM_FANTRAY = 7
 NUM_PSU = 2
 NUM_THERMAL = 8
 NUM_SFP = 32
+NUM_COMPONENT = 6
 HOST_REBOOT_CAUSE_PATH = "/host/reboot-cause/"
 PMON_REBOOT_CAUSE_PATH = "/usr/share/sonic/platform/api_files/reboot-cause/"
 REBOOT_CAUSE_FILE = "reboot-cause.txt"
 PREV_REBOOT_CAUSE_FILE = "previous-reboot-cause.txt"
-HOST_CHK_CMD = "docker > /dev/null 2>&1"
-GET_HWSKU_CMD = "sonic-cfggen -d -v DEVICE_METADATA.localhost.hwsku"
-GET_PLATFORM_CMD = "sonic-cfggen -d -v DEVICE_METADATA.localhost.platform"
+HOST_CHK_CMD = ["docker"]
+GET_HWSKU_CMD = ["sonic-cfggen", "-d", "-v", "DEVICE_METADATA.localhost.hwsku"]
+GET_PLATFORM_CMD = ["sonic-cfggen", "-d", "-v", "DEVICE_METADATA.localhost.platform"]
+EEPROM_BOOT_TIME_INIT_DONE='/tmp/eeprom_init_done'
 
 class Chassis(ChassisBase):
     """Platform-specific Chassis class"""
@@ -43,6 +45,7 @@ def __init__(self):
         self.__initialize_fan()
         self.__initialize_psu()
         self.__initialize_thermals()
+        self.__initialize_components()
         self.__initialize_sfp()
         self.__initialize_eeprom()
 
@@ -54,10 +57,11 @@ def __initialize_sfp(self):
 
 
     def __initialize_fan(self):
-        from sonic_platform.fan import Fan
-        for fan_index in range(0, NUM_FAN):
-            fan = Fan(fan_index)
-            self._fan_list.append(fan)
+        from sonic_platform.fan_drawer import FanDrawer
+        for fan_index in range(0, NUM_FANTRAY):
+            fandrawer = FanDrawer(fan_index)
+            self._fan_drawer_list.append(fandrawer)
+            self._fan_list.extend(fandrawer._fan_list)
 
     def __initialize_psu(self):
         from sonic_platform.psu import Psu
@@ -75,8 +79,14 @@ def __initialize_eeprom(self):
         from sonic_platform.eeprom import Tlv
         self._eeprom = Tlv()
 
+    def __initialize_components(self):
+        from sonic_platform.component import Component
+        for index in range(0, NUM_COMPONENT):
+            component = Component(index)
+            self._component_list.append(component)
+
     def __is_host(self):
-        return os.system(HOST_CHK_CMD) == 0
+        return subprocess.call(HOST_CHK_CMD) == 0
 
     def __read_txt_file(self, file_path):
         try:
@@ -96,7 +106,7 @@ def get_base_mac(self):
         """
         return self._eeprom.get_mac()
 
-    def get_serial_number(self):
+    def get_serial(self):
         """
         Retrieves the hardware serial number for the chassis
         Returns:
@@ -141,15 +151,28 @@ def get_reboot_cause(self):
         return (reboot_cause, description)
 
     def _get_sku_name(self):
-        p = subprocess.Popen(GET_HWSKU_CMD, shell=True, stdout=subprocess.PIPE)
+        p = subprocess.Popen(GET_HWSKU_CMD, stdout=subprocess.PIPE)
         out, err = p.communicate()
         return out.decode().rstrip('\n')
 
     def _get_platform_name(self):
-        p = subprocess.Popen(GET_PLATFORM_CMD, shell=True, stdout=subprocess.PIPE)
+        p = subprocess.Popen(GET_PLATFORM_CMD, stdout=subprocess.PIPE)
         out, err = p.communicate()
         return out.decode().rstrip('\n')
 
+    def get_watchdog(self):
+        """
+        Retreives hardware watchdog device on this chassis
+        Returns:
+            An object derived from WatchdogBase representing the hardware
+            watchdog device
+        """
+        if self._watchdog is None:
+            from sonic_platform.watchdog import Watchdog
+            self._watchdog = Watchdog()
+
+        return self._watchdog
+
     def get_name(self):
         """
         Retrieves the name of the device
@@ -171,10 +194,22 @@ def _get_sfp_presence(self):
         port_pres = {}
         for port in range(0, NUM_SFP):
             sfp = self._sfp_list[port]
-            port_pres[port] = sfp.get_presence()
+            port_pres[port] = 1 if sfp.get_presence() else 0
 
         return port_pres
 
+    def _read_sfp_eeprom_to_buffer(self, port):
+        sfp = self._sfp_list[port]
+        #if os.path.exists(EEPROM_BOOT_TIME_INIT_DONE):
+        #    return sfp.read_eeprom_buffer()
+        c = sfp._read_eeprom_specific_bytes(0,1)
+        return c != ['ff'] and c != ['00']
+
+    def _clear_sfp_eeprom_buffer(self, port):
+        sfp = self._sfp_list[port]
+        return sfp.clear_eeprom_buffer()
+
+
     def get_change_event(self, timeout=0):
         port_dict = {}
         ret_dict = {'sfp': port_dict}
@@ -201,12 +236,19 @@ def get_change_event(self, timeout=0):
                 if cur_presence[port] != self._transceiver_presence[port]:
                     change_event = True
                     if cur_presence[port] == 1:
-                        port_dict[port] = '1'
+                        if self._read_sfp_eeprom_to_buffer(port):
+                            port_dict[port] = '1'
+                            self._transceiver_presence[port] = 1
+                        else:
+                            cur_presence[port] = 0
+                            self._transceiver_presence[port] = 0
                     else:
                         port_dict[port] = '0'
+                        self._clear_sfp_eeprom_buffer(port)
+                        self._transceiver_presence[port] = 0
 
-            self._transceiver_presence = cur_presence
-            if change_event == True:
+            #self._transceiver_presence = cur_presence
+            if change_event is True:
                 break
 
             if not forever:
@@ -220,3 +262,96 @@ def get_change_event(self, timeout=0):
             sfp.reinit()
 
         return True, ret_dict
+
+    def is_modular_chassis(self):
+        """
+        Retrieves whether the sonic instance is part of modular chassis
+        Returns:
+            A bool value, should return False by default or for fixed-platforms.
+            Should return True for supervisor-cards, line-cards etc running as part
+            of modular-chassis.
+        """
+        return False
+
+    def initizalize_system_led(self):
+        self.system_led = ""
+        return True
+
+    def set_status_led(self, color):
+        """
+        Sets the state of the system LED
+
+        Args:
+            color: A string representing the color with which to set the
+                   system LED
+
+        Returns:
+            bool: True if system LED state is set successfully, False if not
+        """
+        self.system_led = color
+        return True
+
+    def get_status_led(self):
+        """
+        Gets the state of the system LED
+
+        Returns:
+            A string, one of the valid LED color strings which could be vendor
+            specified.
+        """
+        return self.system_led
+
+
+    def get_presence(self):
+        """
+        Retrieves the presence of the Chassis
+        Returns:
+            bool: True if Chassis is present, False if not
+        """
+        return True
+
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+        return self._eeprom.get_model()
+
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        return True
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device. If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of entPhysicalContainedIn is '0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device or -1 if cannot determine the position
+        """
+        return -1
+
+    def is_replaceable(self):
+        """
+        Indicate whether this device is replaceable.
+        Returns:
+            bool: True if it is replaceable.
+        """
+        return False
+
+    def get_revision(self):
+        """
+        Retrieves the hardware revision of the device
+
+        Returns:
+            string: Revision value of device
+        """
+
+        return '0'
+
+    def get_thermal_manager(self):
+        raise NotImplementedError
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/component.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/component.py
new file mode 100755
index 000000000000..40a0ba551be2
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/component.py
@@ -0,0 +1,269 @@
+#!/usr/bin/env python
+
+import subprocess
+from shlex import split
+from collections import namedtuple
+from functools import reduce
+
+
+try:
+    from sonic_platform_base.component_base import ComponentBase
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
+
+CPLD_ADDR_MAPPING = {
+    "CPLD1": "0-0006",
+    "CPLD2": "0-0007",
+}
+
+FPGA_ADDR_MAPPING = {
+    "MB_FPGA": "0-0030",
+}
+
+proc_output = namedtuple('proc_output', 'stdout stderr')
+GET_CPU_FPGA_VER_CMD = ["i2cget", "-f", "-y", "0", "0x10", "0x0"]
+#GET_BMC_VER_CMD= "ipmitool mc info | grep 'Firmware Revision' | awk '{printf $4}'"
+SYSFS_PATH = "/sys/bus/i2c/devices/"
+BIOS_VERSION_PATH = "/sys/class/dmi/id/bios_version"
+COMPONENT_LIST= [
+   ("BIOS", "Basic Input/Output System"),
+   ("CPLD1", "CPLD 1"),
+   ("CPLD2", "CPLD 2"),
+   ("MB_FPGA", "MB FPGA"),
+   ("CPU_FPGA", "CPU FPGA"),
+   ("BMC", "baseboard management controller")
+]
+
+class Component(ComponentBase):
+    """Platform-specific Component class"""
+
+    DEVICE_TYPE = "component"
+
+    def __init__(self, component_index=0):
+        ComponentBase.__init__(self)
+        self.index = component_index
+        self.name = self.get_name()
+
+    def pipeline(self, starter_command, *commands):
+        if not commands:
+            try:
+                starter_command, *commands = starter_command.split('|')
+            except AttributeError:
+                pass
+        starter_command = self._parse(starter_command)
+        starter = subprocess.Popen(starter_command, stdout=subprocess.PIPE)
+        last_proc = reduce(self._create_pipe, map(self._parse, commands), starter)
+        return proc_output(*last_proc.communicate())
+
+    def _create_pipe(self, previous, command):
+        proc = subprocess.Popen(command, stdin=previous.stdout, stdout=subprocess.PIPE)
+        previous.stdout.close()
+        return proc
+
+    def _parse(self, cmd):
+        try:
+            return split(cmd)
+        except Exception:
+            return cmd
+
+    def __read_txt_file(self, file_path):
+        try:
+            with open(file_path, 'r') as fd:
+                data = fd.read()
+                return data.strip()
+        except IOError:
+            pass
+        return ""
+
+    def __get_bios_version(self):
+        # Retrieves the BIOS firmware version
+        try:
+            with open(BIOS_VERSION_PATH, 'r') as fd:
+                bios_version = fd.read()
+                return bios_version.strip()
+        except Exception as e:
+            return None
+
+    def __get_cpld_version(self):
+        # Retrieves the CPLD firmware version
+        cpld_version = dict()
+        for cpld_name in CPLD_ADDR_MAPPING:
+            try:
+                cpld_path = "{}{}{}".format(SYSFS_PATH, CPLD_ADDR_MAPPING[cpld_name], '/version')
+                cpld_version_raw= int(self.__read_txt_file(cpld_path), 10)
+                cpld_version[cpld_name] = "{} {}".format("MP" if (cpld_version_raw & 0x10) else "Proto", cpld_version_raw & 0xf)
+            except Exception as e:
+                print('Get exception when read cpld')
+                cpld_version[cpld_name] = 'None'
+
+        return cpld_version
+
+    def __get_cpu_fpga_ver(self):
+        try:
+            p = subprocess.Popen(GET_CPU_FPGA_VER_CMD, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            return out.decode().rstrip('\n')
+        except Exception as e:
+            print('Get exception when read cpu fpga')
+            return 'None'
+
+    def __get_bmc_version(self):
+        try:
+            #GET_BMC_VER_CMD
+            out, err = self.pipeline("ipmitool mc info", "grep 'Firmware Revision'", "awk '{printf $4}'")
+            return out.decode().rstrip('\n')
+        except Exception as e:
+            print('Get exception when read bmc')
+            return 'None'
+
+    def __get_fpga_version(self):
+        # Retrieves the fpga firmware version
+        fpga_version = dict()
+        try:
+            fpga_path = "{}{}{}".format(SYSFS_PATH, FPGA_ADDR_MAPPING['MB_FPGA'], '/version')
+            fpga_version_raw= int(self.__read_txt_file(fpga_path), 10)
+            fpga_version["MB_FPGA"] = "{} {}.{}".format("Formal" if (fpga_version_raw & 0x80) else "Test", ((fpga_version_raw & 0x70) >> 4), fpga_version_raw & 0xf)
+        except Exception as e:
+            print('Get exception when read fpga')
+            fpga_version["MB_FPGA"] = 'None'
+
+        fpga_version_raw= int(self.__get_cpu_fpga_ver(), 16)
+        fpga_version["CPU_FPGA"] = "{} {}.{}".format("Formal" if (fpga_version_raw & 0x80) else "Test", ((fpga_version_raw & 0x70) >> 4), fpga_version_raw & 0xf)
+
+        return fpga_version
+
+    def get_name(self):
+        """
+        Retrieves the name of the component
+         Returns:
+            A string containing the name of the component
+        """
+        return COMPONENT_LIST[self.index][0]
+
+    def get_description(self):
+        """
+        Retrieves the description of the component
+            Returns:
+            A string containing the description of the component
+        """
+        return COMPONENT_LIST[self.index][1]
+
+
+    def get_firmware_version(self):
+        """
+        Retrieves the firmware version of module
+        Returns:
+            string: The firmware versions of the module
+        """
+        fw_version = None
+
+        if self.name == "BIOS":
+            fw_version = self.__get_bios_version()
+        elif "CPLD" in self.name:
+            cpld_version = self.__get_cpld_version()
+            fw_version = cpld_version.get(self.name)
+        elif "FPGA" in self.name:
+            fpga_version = self.__get_fpga_version()
+            fw_version = fpga_version.get(self.name)
+        elif "BMC" in self.name:
+            fw_version = self.__get_bmc_version()
+
+        return fw_version
+
+    def install_firmware(self, image_path):
+        """
+        Install firmware to module
+        Args:
+            image_path: A string, path to firmware image
+        Returns:
+            A boolean, True if install successfully, False if not
+        """
+        raise NotImplementedError
+
+    def get_presence(self):
+        """
+        Retrieves the presence of the FAN
+        Returns:
+            bool: True if FAN is present, False if not
+        """
+        return True
+
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+        return 'N/A'
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of the device
+        Returns:
+            string: Serial number of device
+        """
+        return 'N/A'
+
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        return True
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device.
+        If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of
+        entPhysicalContainedIn is'0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device
+            or -1 if cannot determine the position
+        """
+        return -1
+
+    def is_replaceable(self):
+        """
+        Indicate whether this device is replaceable.
+        Returns:
+            bool: True if it is replaceable.
+        """
+        return False
+
+    def get_available_firmware_version(self, image_path):
+        """
+        Retrieves the available firmware version of the component
+        Note: the firmware version will be read from image
+        Args:
+            image_path: A string, path to firmware image
+        Returns:
+            A string containing the available firmware version of the component
+        """
+        return "N/A"
+
+    def get_firmware_update_notification(self, image_path):
+        """
+        Retrieves a notification on what should be done in order to complete
+        the component firmware update
+        Args:
+            image_path: A string, path to firmware image
+        Returns:
+            A string containing the component firmware update notification if required.
+            By default 'None' value will be used, which indicates that no actions are required
+        """
+        return "None"
+
+    def update_firmware(self, image_path):
+        """
+        Updates firmware of the component
+        This API performs firmware update: it assumes firmware installation and loading in a single call.
+        In case platform component requires some extra steps (apart from calling Low Level Utility)
+        to load the installed firmware (e.g, reboot, power cycle, etc.) - this will be done automatically by API
+        Args:
+            image_path: A string, path to firmware image
+        Raises:
+            RuntimeError: update failed
+        """
+        return False
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/eeprom.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/eeprom.py
old mode 100644
new mode 100755
similarity index 81%
rename from device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/eeprom.py
rename to platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/eeprom.py
index 9d01b1f866b8..7db38ead60a5
--- a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/eeprom.py
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/eeprom.py
@@ -41,12 +41,19 @@ def __parse_output(self, decode_output):
         for line in lines:
             try:
                 match = re.search(
-                    '(0x[0-9a-fA-F]{2})([\s]+[\S]+[\s]+)([\S]+)', line)
-                if match is not None:
+                    '(0x[0-9a-fA-F]{2})([\s]+[\S]+[\s]+)([\S]+[\s]+[\S]+)', line)
+                if match is not None and match.group(1) == '0x25':
                     idx = match.group(1)
                     value = match.group(3).rstrip('\0')
+                    _eeprom_info_dict[idx] = value
+                else:
+                    match = re.search(
+                        '(0x[0-9a-fA-F]{2})([\s]+[\S]+[\s]+)([\S]+)', line)
+                    if match is not None:
+                        idx = match.group(1)
+                        value = match.group(3).rstrip('\0')
+                        _eeprom_info_dict[idx] = value
 
-                _eeprom_info_dict[idx] = value
             except BaseException:
                 pass
         return _eeprom_info_dict
@@ -70,7 +77,7 @@ def _load_eeprom(self):
         if not os.path.exists(CACHE_ROOT):
             try:
                 os.makedirs(CACHE_ROOT)
-            except OSError:
+            except Exception:
                 pass
 
         #
@@ -79,7 +86,7 @@ def _load_eeprom(self):
         #
         try:
             self.set_cache_name(os.path.join(CACHE_ROOT, CACHE_FILE))
-        except OSError:
+        except Exception:
             pass
 
         e = self.read_eeprom()
@@ -90,6 +97,7 @@ def _load_eeprom(self):
             self.update_cache(e)
         except Exception:
             pass
+
         self.decode_eeprom(e)
         decode_output = sys.stdout.getvalue()
         sys.stdout = original_stdout
@@ -108,3 +116,6 @@ def get_serial(self):
 
     def get_mac(self):
         return self._eeprom.get('0x24', "Undefined.")
+
+    def get_model(self):
+        return self._eeprom.get('0x21', "Undefined.")
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/fan.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/fan.py
new file mode 100755
index 000000000000..e6e2ff599524
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/fan.py
@@ -0,0 +1,263 @@
+#############################################################################
+#
+# Module contains an implementation of SONiC Platform Base API and
+# provides the fan status which are available in the platform
+#
+#############################################################################
+
+
+import os.path
+
+try:
+    from sonic_platform_base.fan_base import FanBase
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
+
+SPEED_TOLERANCE = 15
+SYSFS_PATH = "/sys/bus/i2c/devices/0-0044"
+SYSFS_PSU_DIR = ["/sys/bus/i2c/devices/0-005a",
+                 "/sys/bus/i2c/devices/0-0059"]
+
+FAN_NAME_LIST = ["FAN-1F", "FAN-1R", "FAN-2F", "FAN-2R",
+                 "FAN-3F", "FAN-3R", "FAN-4F", "FAN-4R",
+                 "FAN-5F", "FAN-5R", "FAN-6F", "FAN-6R",
+                 "FAN-7F", "FAN-7R"]
+
+class Fan(FanBase):
+    """Platform-specific Fan class"""
+
+    def __init__(self, fan_tray_index, fan_index=0, is_psu_fan=False, psu_index=0):
+        self.fan_index = fan_index
+        self.fan_tray_index = fan_tray_index
+        self.is_psu_fan = is_psu_fan
+
+        if self.is_psu_fan:
+            self.psu_index = psu_index
+
+        FanBase.__init__(self)
+
+    def __search_hwmon_dir_name(self, directory):
+        try:
+            dirs = os.listdir(directory)
+            for file in dirs:
+                if file.startswith("hwmon"):
+                    return file
+        except IOError:
+            pass
+        return ''
+
+    def __read_txt_file(self, file_path):
+        try:
+            with open(file_path, 'r') as fd:
+                data = fd.read()
+                return data.strip()
+        except IOError:
+            pass
+        return None
+
+    def __write_txt_file(self, file_path, data):
+        try:
+            with open(file_path, 'w') as fd:
+                fd.write(data)
+        except IOError:
+            pass
+        return None
+
+    def get_direction(self):
+        """
+        Retrieves the direction of fan
+        Returns:
+            A string, either FAN_DIRECTION_INTAKE or FAN_DIRECTION_EXHAUST
+            depending on fan direction
+        """
+        direction = 0
+        if self.is_psu_fan:
+            # psu fan direction should be the same as fan tray
+            path= "{}/fan1_direction".format(SYSFS_PATH)
+            direction=self.__read_txt_file(path)
+            if direction is None:
+                return self.FAN_DIRECTION_EXHAUST
+        elif self.get_presence():
+            path= "{}/fan{}_direction".format(SYSFS_PATH, self.fan_tray_index + 1)
+            direction=self.__read_txt_file(path)
+            if direction is None:
+                return self.FAN_DIRECTION_EXHAUST
+
+        return self.FAN_DIRECTION_EXHAUST if int(direction) == 0 else self.FAN_DIRECTION_INTAKE
+
+
+    def get_speed(self):
+        """
+        Retrieves the speed of fan as a percentage of full speed
+        Returns:
+            An integer, the percentage of full fan speed, in the range 0 (off)
+                 to 100 (full speed)
+
+        """
+        speed = 0
+        if self.is_psu_fan:
+            fan_path="{}/pwm".format(SYSFS_PSU_DIR[self.psu_index])
+            speed = self.__read_txt_file(fan_path)
+            if speed is not None:
+                return int(speed)
+            else:
+                return 0
+        elif self.get_presence():
+            path= "{}/pwm".format(SYSFS_PATH)
+            speed=self.__read_txt_file(path)
+            if speed is None:
+                return 0
+
+        return int(speed)
+
+    def get_target_speed(self):
+        """
+        Retrieves the target (expected) speed of the fan
+        Returns:
+            An integer, the percentage of full fan speed, in the range 0 (off)
+                 to 100 (full speed)
+
+        Note:
+            speed_pc = pwm_target/255*100
+
+            0   : when PWM mode is use
+            pwm : when pwm mode is not use
+        """
+        return self.get_speed()
+
+    def get_speed_tolerance(self):
+        """
+        Retrieves the speed tolerance of the fan
+        Returns:
+            An integer, the percentage of variance from target speed which is
+                 considered tolerable
+        """
+        return SPEED_TOLERANCE
+
+    def set_speed(self, speed):
+        """
+        Sets the fan speed
+        Args:
+            speed: An integer, the percentage of full fan speed to set fan to,
+                   in the range 0 (off) to 100 (full speed)
+        Returns:
+            A boolean, True if speed is set successfully, False if not
+
+        """
+
+        return False
+
+    def set_status_led(self, color):
+        """
+        Sets the state of the fan module status LED
+        Args:
+            color: A string representing the color with which to set the
+                   fan module status LED
+        Returns:
+            bool: True if status LED state is set successfully, False if not
+        """
+        return False #Not supported
+
+    def get_status_led(self):
+        """
+        Gets the state of the fan status LED
+        Returns:
+            A string, one of the predefined STATUS_LED_COLOR_* strings above
+        """
+        status=self.get_presence()
+        if status is None:
+            return  self.STATUS_LED_COLOR_OFF
+
+        return {
+            1: self.STATUS_LED_COLOR_GREEN,
+            0: self.STATUS_LED_COLOR_RED
+        }.get(status, self.STATUS_LED_COLOR_OFF)
+
+    def get_name(self):
+        """
+        Retrieves the name of the device
+            Returns:
+            string: The name of the device
+        """
+
+        fan_name = FAN_NAME_LIST[self.fan_tray_index*2 + self.fan_index] \
+            if not self.is_psu_fan \
+            else "PSU-{} FAN-{}".format(self.psu_index+1, self.fan_index+1)
+
+        return fan_name
+
+    def get_presence(self):
+        """
+        Retrieves the presence of the FAN
+        Returns:
+            bool: True if FAN is present, False if not
+        """
+
+        if self.is_psu_fan:
+            present_path="{}/present".format(SYSFS_PSU_DIR[self.psu_index])
+        else:
+            present_path="{}/fan{}_present".format(SYSFS_PATH, self.fan_tray_index + 1)
+
+        val=self.__read_txt_file(present_path)
+        if val is not None:
+            return int(val, 10)==1
+        else:
+            return False
+
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        if self.is_psu_fan:
+            status_path = "{}/power_good".format(SYSFS_PSU_DIR[self.psu_index])
+            val=self.__read_txt_file(status_path)
+            if val is not None:
+                return int(val, 10)==1
+            else:
+                return False
+        else:
+            status=self.get_presence()
+            if status is None:
+                return  False
+            return status
+
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+
+        return "N/A"
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of the device
+        Returns:
+            string: Serial number of device
+        """
+        return "N/A"
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device.
+        If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of
+        entPhysicalContainedIn is'0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device
+            or -1 if cannot determine the position
+        """
+        return (self.fan_tray_index * 2 + self.fan_index + 1) \
+            if not self.is_psu_fan else (self.psu_index + 1)
+
+    def is_replaceable(self):
+        """
+        Indicate whether this device is replaceable.
+        Returns:
+            bool: True if it is replaceable.
+        """
+        return True if not self.is_psu_fan else False
+
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/fan_drawer.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/fan_drawer.py
new file mode 100644
index 000000000000..78d54f5dec25
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/fan_drawer.py
@@ -0,0 +1,120 @@
+########################################################################
+#
+# Module contains an implementation of SONiC Platform Base API and
+# provides the Fan-Drawers' information available in the platform.
+#
+########################################################################
+
+try:
+    from sonic_platform_base.fan_drawer_base import FanDrawerBase
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
+
+FANS_PER_FANTRAY = 2
+MAX_FAN_WATT = 40.32
+
+
+class FanDrawer(FanDrawerBase):
+    """Platform-specific Fan class"""
+
+    def __init__(self, fantray_index):
+
+        FanDrawerBase.__init__(self)
+        # FanTray is 0-based in platforms
+        self.fantrayindex = fantray_index
+        self.__initialize_fan_drawer()
+
+
+    def __initialize_fan_drawer(self):
+        from sonic_platform.fan import Fan
+        for i in range(FANS_PER_FANTRAY):
+            self._fan_list.append(Fan(self.fantrayindex, i))
+
+    def get_name(self):
+        """
+        Retrieves the fan drawer name
+        Returns:
+            string: The name of the device
+        """
+        return "FanTray{}".format(self.fantrayindex+1)
+
+    def get_presence(self):
+        """
+        Retrieves the presence of the device
+        Returns:
+            bool: True if device is present, False if not
+        """
+        return self._fan_list[0].get_presence()
+
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+        return self._fan_list[0].get_model()
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of the device
+        Returns:
+            string: Serial number of device
+        """
+        return self._fan_list[0].get_serial()
+
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        return self._fan_list[0].get_status()
+
+    def set_status_led(self, color):
+        """
+        Sets the state of the fan drawer status LED
+        Args:
+            color: A string representing the color with which to set the
+                   fan drawer status LED
+        Returns:
+            bool: True if status LED state is set successfully, False if not
+        """
+        return self._fan_list[0].set_status_led(color)
+    def get_status_led(self):
+        """
+        Gets the state of the fan drawer LED
+
+        Returns:
+           A string, one of the predefined STATUS_LED_COLOR_* strings above
+        """
+        return self._fan_list[0].get_status_led()
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device.
+        If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of
+        entPhysicalContainedIn is'0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device
+            or -1 if cannot determine the position
+        """
+        return (self.fantrayindex+1)
+
+    def is_replaceable(self):
+        """
+        Indicate whether this device is replaceable.
+        Returns:
+            bool: True if it is replaceable.
+        """
+        return True
+
+    def get_maximum_consumed_power(self):
+        """
+        Retrives the maximum power drawn by Fan Drawer
+        Returns:
+            A float, with value of the maximum consumable power of the
+            component.
+        """
+        return MAX_FAN_WATT
+
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/platform.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/platform.py
old mode 100644
new mode 100755
similarity index 100%
rename from device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/platform.py
rename to platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/platform.py
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/psu.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/psu.py
new file mode 100755
index 000000000000..2ec59298a4d0
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/psu.py
@@ -0,0 +1,324 @@
+#!/usr/bin/env python
+
+#############################################################################
+# psuutil.py
+# Platform-specific PSU status interface for SONiC
+#############################################################################
+
+try:
+    from sonic_platform_base.psu_base import PsuBase
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
+
+PSU_NAME_LIST = ["PSU-1", "PSU-2"]
+
+class Psu(PsuBase):
+    """Platform-specific Psu class"""
+
+    SYSFS_PSU_DIR = ["/sys/bus/i2c/devices/0-005a",
+                     "/sys/bus/i2c/devices/0-0059"]
+
+    def __init__(self, psu_index):
+        self._fan_list = []
+        self.PSU_TEMP_MAX = 85 * 1000
+        self.PSU_OUTPUT_POWER_MAX = 1300 * 1000
+        self.PSU_OUTPUT_VOLTAGE_MIN = 11400
+        self.PSU_OUTPUT_VOLTAGE_MAX = 12600
+        self.index = psu_index
+        PsuBase.__init__(self)
+        self.__initialize_fan()
+
+    def __initialize_fan(self):
+        from sonic_platform.fan import Fan
+        for fan_index in range(0, 1):
+                fan = Fan(fan_index, 0, is_psu_fan=True, psu_index=self.index)
+                self._fan_list.append(fan)
+
+    def __read_txt_file(self, file_path):
+        try:
+            with open(file_path, 'r') as fd:
+                data = fd.read()
+                return data.strip()
+        except IOError:
+            pass
+        return ""
+
+
+    def get_fan(self, index):
+        """
+        Retrieves object representing the fan module contained in this PSU
+        Returns:
+            An object dervied from FanBase representing the fan module
+            contained in this PSU
+        """
+        return self._fan_list[index]
+
+    def get_powergood_status(self):
+        """
+        Retrieves the powergood status of PSU
+        Returns:
+            A boolean, True if PSU has stablized its output voltages and passed all
+            its internal self-tests, False if not.
+        """
+        return self.get_status()
+
+    def set_status_led(self, color):
+        """
+        Sets the state of the PSU status LED
+        Args:
+            color: A string representing the color with which to set the PSU status LED
+                   Note: Only support green and off
+        Returns:
+            bool: True if status LED state is set successfully, False if not
+        """
+        # Hardware not supported
+        return False
+
+    def get_name(self):
+        """
+        Retrieves the name of the device
+            Returns:
+            string: The name of the device
+        """
+        return PSU_NAME_LIST[self.index]
+
+    def get_presence(self):
+        """
+        Retrieves the presence of the PSU
+        Returns:
+            bool: True if PSU is present, False if not
+        """
+        attr_file ='present'
+        attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+        status = 0
+        try:
+            with open(attr_path, 'r') as psu_prs:
+                status = int(psu_prs.read())
+        except IOError:
+            return False
+
+        return status == 1
+
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        attr_file = 'power_good'
+        attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+        status = 0
+        try:
+            with open(attr_path, 'r') as power_status:
+                status = int(power_status.read())
+        except IOError:
+            return False
+
+        return status == 1
+
+    def get_model(self):
+        """
+        Retrieves the model number/name of a power supply unit (PSU) defined
+                by 1-based index <idx>
+        :param idx: An integer, 1-based index of the PSU of which to query model number
+        :return: String, denoting model number/name
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'model'
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+                val = self.__read_txt_file(attr_path)
+                return str(val)
+        except Exception as e:
+            return None
+
+    def get_mfr_id(self):
+        """
+        Retrieves the manufacturing id of a power supply unit (PSU) defined
+                by 1-based index <idx>
+        :param idx: An integer, 1-based index of the PSU of which to query mfr id
+        :return: String, denoting manufacturing id
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'vendor'
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+                val = self.__read_txt_file(attr_path)
+                return str(val)
+        except Exception as e:
+            return None
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of a power supply unit (PSU) defined
+                by 1-based index <idx>
+        :param idx: An integer, 1-based index of the PSU of which to query serial number
+        :return: String, denoting serial number of the PSU unit
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'sn'
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+                val = self.__read_txt_file(attr_path)
+                return str(val)
+        except Exception as e:
+            return None
+
+    def get_voltage(self):
+        """
+        Retrieves current PSU voltage output
+        Returns:
+            A int number, the output voltage in volts.
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'in2_input'
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+                val = self.__read_txt_file(attr_path)
+                return float(val) / 1000.0
+        except Exception as e:
+            return None
+
+    def get_current(self):
+        """
+        Retrieves present electric current supplied by PSU
+        Returns:
+            A int number, electric current in amperes
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'curr2_input'
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+                val = self.__read_txt_file(attr_path)
+                return float(val) / 1000.0
+        except Exception as e:
+            return None
+
+    def get_power(self):
+        """
+        Retrieves current energy supplied by PSU
+        Returns:
+            A int number, the power in watts.
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'power2_input'
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+                val = self.__read_txt_file(attr_path)
+                return float(val) / 1000000.0
+        except Exception as e:
+            return None
+
+    def get_status_led(self):
+        """
+        Gets the state of the PSU status LED
+        Returns:
+            A string, one of the predefined STATUS_LED_COLOR_* strings.
+        """
+        # TODO
+        if self.get_presence():
+            if self.get_powergood_status():
+                return self.STATUS_LED_COLOR_GREEN
+            else:
+                return self.STATUS_LED_COLOR_RED
+        else:
+            return None
+
+    def get_temperature(self):
+        """
+        Retrieves current temperature reading from PSU
+        Returns:
+            A float number of current temperature in Celsius up to nearest thousandth
+            of one degree Celsius, e.g. 30.125
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'temp1_input'
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+                val = self.__read_txt_file(attr_path)
+                return float(val) / 1000.0
+        except Exception as e:
+            return None
+
+    def get_temperature_high_threshold(self):
+        """
+        Retrieves the high threshold temperature of PSU
+        Returns:
+            A float number, the high threshold temperature of PSU in Celsius
+            up to nearest thousandth of one degree Celsius, e.g. 30.125
+        """
+        return float(self.PSU_TEMP_MAX/1000)
+
+    def get_voltage_high_threshold(self):
+        """
+        Retrieves the high threshold PSU voltage output
+        Returns:
+            A float number, the high threshold output voltage in volts,
+            e.g. 12.1
+        """
+        return float(self.PSU_OUTPUT_VOLTAGE_MAX/1000)
+
+    def get_voltage_low_threshold(self):
+        """
+        Retrieves the low threshold PSU voltage output
+        Returns:
+            A float number, the low threshold output voltage in volts,
+            e.g. 12.1
+        """
+        return float(self.PSU_OUTPUT_VOLTAGE_MIN/1000)
+
+    def get_maximum_supplied_power(self):
+        """
+        Retrieves the maximum supplied power by PSU
+        Returns:
+            A float number, the maximum power output in Watts.
+            e.g. 1200.1
+        """
+        return float(self.PSU_OUTPUT_POWER_MAX/1000)
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device. If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of entPhysicalContainedIn is '0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device or -1 if cannot determine the position
+        """
+        return self.index + 1
+
+    def is_replaceable(self):
+        return True
+
+    def get_revision(self):
+        """
+        Retrieves the hardware revision of the device
+        Returns:
+            string: Revision value of device
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'rev'
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
+                with open(attr_path, 'r') as revision:
+                    val = revision.read()
+                return val.strip()
+        except IOError:
+            return None
+
+    def get_num_fans(self):
+        """
+        Retrieves the number of fan modules available on this PSU
+
+        Returns:
+            An integer, the number of fan modules available on this PSU
+        """
+        return len(self._fan_list)
+
+    def get_all_fans(self):
+        """
+        Retrieves all fan modules available on this PSU
+
+        Returns:
+            A list of objects derived from FanBase representing all fan
+            modules available on this PSU
+        """
+        return self._fan_list
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/sfp.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/sfp.py
old mode 100644
new mode 100755
similarity index 72%
rename from device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/sfp.py
rename to platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/sfp.py
index 7664999e56b8..53ca1e970500
--- a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/sfp.py
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/sfp.py
@@ -10,8 +10,14 @@
     from sonic_platform_base.sonic_sfp.sff8436 import sff8436Dom
     from sonic_platform_base.sonic_sfp.qsfp_dd import qsfp_dd_InterfaceId
     from sonic_platform_base.sonic_sfp.qsfp_dd import qsfp_dd_Dom
+    from sonic_platform_base.sonic_sfp.sffbase import sffbase
+    from sonic_platform_base.sonic_sfp.sff8024 import type_abbrv_name
+    from sonic_platform_base.sonic_sfp.sff8024 import type_of_media_interface
     from sonic_py_common.logger import Logger
     import sys
+    import time
+    import subprocess
+    import os
 except ImportError as e:
     raise ImportError(str(e) + "- required module not found")
 
@@ -133,9 +139,9 @@
 QSFP_OPTION_VALUE_WIDTH = 4
 
 QSFP_MODULE_UPPER_PAGE3_START = 384
-QSFP_MODULE_THRESHOLD_OFFSET = 128
+QSFP_MODULE_THRESHOLD_OFFSET = 0
 QSFP_MODULE_THRESHOLD_WIDTH = 24
-QSFP_CHANNL_THRESHOLD_OFFSET = 176
+QSFP_CHANNL_THRESHOLD_OFFSET = 48
 QSFP_CHANNL_THRESHOLD_WIDTH = 24
 
 #definitions of the offset and width for values in DOM info eeprom
@@ -149,9 +155,13 @@
 QSFP_DD_RX_POWER_WIDTH = 16
 QSFP_DD_TX_POWER_OFFSET = 26
 QSFP_DD_TX_POWER_WIDTH = 16
+QSFP_DD_CHANNL_FLAGS_SUPPORT_OFFSET = 29
+QSFP_DD_CHANNL_FLAGS_SUPPORT_WIDTH = 2
+QSFP_DD_CHANNL_MON_SUPPORT_OFFSET = 31
+QSFP_DD_CHANNL_MON_SUPPORT_WIDTH = 2
 QSFP_DD_CHANNL_MON_OFFSET = 154
 QSFP_DD_CHANNL_MON_WIDTH = 48
-QSFP_DD_CHANNL_DISABLE_STATUS_OFFSET = 86
+QSFP_DD_CHANNL_DISABLE_STATUS_OFFSET = 2
 QSFP_DD_CHANNL_DISABLE_STATUS_WIDTH = 1
 QSFP_DD_CHANNL_RX_LOS_STATUS_OFFSET = 19
 QSFP_DD_CHANNL_RX_LOS_STATUS_WIDTH = 1
@@ -193,8 +203,52 @@
 QSFP_TYPE = "QSFP"
 QSFP_DD_TYPE = "QSFP_DD"
 
+PAUSE_EEPROM_SERVICE_STAMP='/tmp/pause_eeprom_polling'
+
 # Global logger class instance
 logger = Logger()
+class ext_qsfp_dd(sffbase):
+    version = '1.0'
+
+    qsfp_dd_mon_capability = {
+        'Tx_bias_support':
+            {'offset': 1,
+             'bit': 0,
+             'type': 'bitvalue'},
+        'Tx_power_support':
+            {'offset': 1,
+             'bit': 1,
+             'type': 'bitvalue'},
+        'Rx_power_support':
+            {'offset': 1,
+             'bit': 2,
+             'type': 'bitvalue'},
+        'Voltage_support':
+            {'offset': 0,
+             'bit': 1,
+             'type': 'bitvalue'},
+        'Temp_support':
+            {'offset': 0,
+             'bit': 0,
+             'type': 'bitvalue'}
+    }
+
+    qsfp_dd_flags_capability = {
+        'tx_fault':
+            {'offset': 0,
+             'bit': 0,
+             'type': 'bitvalue'},
+        'rx_los':
+            {'offset': 1,
+             'bit': 1,
+             'type': 'bitvalue'}
+    }
+
+    def parse_mon_capability(self, sn_raw_data, start_pos):
+        return sffbase.parse(self, self.qsfp_dd_mon_capability, sn_raw_data, start_pos)
+
+    def parse_flags_capability(self, sn_raw_data, start_pos):
+        return sffbase.parse(self, self.qsfp_dd_flags_capability, sn_raw_data, start_pos)
 
 class Sfp(SfpBase):
     """Platform-specific Sfp class"""
@@ -243,19 +297,24 @@ class Sfp(SfpBase):
     RESET_17_32_PATH = "/sys/bus/i2c/devices/0-0007/port{}_reset"
     PRS_1_16_PATH = "/sys/bus/i2c/devices/0-0006/port{}_present"
     PRS_17_32_PATH = "/sys/bus/i2c/devices/0-0007/port{}_present"
+    LPMODE_1_16_PATH = "/sys/bus/i2c/devices/0-0006/port{}_lpmode"
+    LPMODE_17_32_PATH = "/sys/bus/i2c/devices/0-0007/port{}_lpmode"
 
     def __init__(self, sfp_index, sfp_type):
         # Init index
         self.index = sfp_index
         self.port_num = self.index + 1
+        self.abbrv = None
 
         # Init eeprom path
         eeprom_path_prefix = '/sys/bus/i2c/devices/0-00'
         self.port_to_eeprom1_mapping = {}
         self.port_to_eeprom2_mapping = {}
+        self.port_to_eeprom3_mapping = {}
         for x in range(self.PORT_START, self.PORT_END + 1):
             self.port_to_eeprom1_mapping[x] = eeprom_path_prefix + self.port_to_i2c_mapping[x] + '/eeprom1'
             self.port_to_eeprom2_mapping[x] = eeprom_path_prefix + self.port_to_i2c_mapping[x] + '/eeprom2'
+            self.port_to_eeprom3_mapping[x] = eeprom_path_prefix + self.port_to_i2c_mapping[x] + '/eeprom3'
 
         self._detect_sfp_type(sfp_type)
         self._dom_capability_detect()
@@ -282,7 +341,153 @@ def get_presence(self):
         except IOError:
             return False
         logger.log_info("debug:port_ %s sfp presence is %s" % (str(self.index), str(presence)))
-        return presence
+        return presence == 1
+
+    def _get_eeprom_by_bmc(self):
+        eeprom_path_prefix = '/sys/bus/i2c/devices/0-00'
+        mux = int((0x70 + self.index / 8) * 2)
+        chan = 1 << (self.index % 8)
+        sel_ch_cmd = 'ipmitool raw 0x30 0x25 0x1 {} 0x0 {} 2>/dev/null'.format(mux, chan)
+        desel_ch_cmd = 'ipmitool raw 0x30 0x25 0x1 {} 0x0 0x0 2>/dev/null'.format(mux)
+        desel_all_ch_cmd = 'ipmitool raw 0x30 0x25 0x1 0xe0 0x0 0x0 2>/dev/null; ipmitool raw 0x30 0x25 0x1 0xe2 0x0 0x0 2>/dev/null; ipmitool raw 0x30 0x25 0x1 0xe4 0x0 0x0 2>/dev/null; ipmitool raw 0x30 0x25 0x1 0xe6 0x0 0x0 2>/dev/null'
+        sel_page_cmd = 'ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f {} 2>/dev/null'
+        read_lower_cmd = 'ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x0 2>/dev/null'
+        read_upper_cmd = 'ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x80 2>/dev/null'
+
+        try:
+            subprocess.Popen(sel_ch_cmd, stdout=subprocess.PIPE)
+            subprocess.Popen(sel_page_cmd.format(0), stdout=subprocess.PIPE)
+            time.sleep(0.05)
+            p = subprocess.Popen(read_lower_cmd, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            # retry if error occurred
+            i = 0
+            while out == b'' and i < 3:
+                subprocess.Popen(desel_all_ch_cmd, stdout=subprocess.PIPE)
+                time.sleep(0.05)
+                subprocess.Popen(sel_ch_cmd, stdout=subprocess.PIPE)
+                subprocess.Popen(sel_page_cmd.format(0), stdout=subprocess.PIPE)
+                time.sleep(0.05)
+                p = subprocess.Popen(read_lower_cmd, stdout=subprocess.PIPE)
+                out, err = p.communicate()
+                i = i + 1
+            if out == b'':
+                return False
+
+            data_lower = out.decode().strip().replace("\n", "")
+
+            i = 0
+            p = subprocess.Popen(read_upper_cmd, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            while out == b'' and i < 3:
+                time.sleep(0.05)
+                p = subprocess.Popen(read_upper_cmd, stdout=subprocess.PIPE)
+                out, err = p.communicate()
+                i = i + 1
+            if out == b'':
+                return False
+
+            data_upper_page_0 = out.decode().strip().replace("\n", "")
+
+            subprocess.Popen(sel_page_cmd.format(0x1), stdout=subprocess.PIPE)
+            p = subprocess.Popen(read_upper_cmd, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            data_upper_page_1 = out.decode().strip().replace("\n", "")
+
+            subprocess.Popen(sel_page_cmd.format(0x2), stdout=subprocess.PIPE)
+            p = subprocess.Popen(read_upper_cmd, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            data_upper_page_2 = out.decode().strip().replace("\n", "")
+
+            subprocess.Popen(sel_page_cmd.format(0x3), stdout=subprocess.PIPE)
+            p = subprocess.Popen(read_upper_cmd, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            data_upper_page_3 = out.decode().strip().replace("\n", "")
+
+            subprocess.Popen(sel_page_cmd.format(0x10), stdout=subprocess.PIPE)
+            p = subprocess.Popen(read_upper_cmd, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            data_upper_page_10 = out.decode().strip().replace("\n", "")
+
+            subprocess.Popen(sel_page_cmd.format(0x11), stdout=subprocess.PIPE)
+            p = subprocess.Popen(read_upper_cmd, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            data_upper_page_11 = out.decode().strip().replace("\n", "")
+
+            subprocess.Popen(sel_page_cmd.format(0), stdout=subprocess.PIPE)
+            subprocess.Popen(desel_ch_cmd, stdout=subprocess.PIPE)
+
+            eeprom1 = data_lower + " " + data_upper_page_0
+            eeprom2 = data_upper_page_1 + " " + data_upper_page_2
+            eeprom3 = data_upper_page_3 + " " + data_upper_page_10 + " " + data_upper_page_11
+
+            os.remove(PAUSE_EEPROM_SERVICE_STAMP)
+
+            eeprom_raw_lower = [int(x, 16) for x in data_lower.split()]
+            if eeprom_raw_lower[0] in QSFP_TYPE_CODE_LIST:
+                temp = eeprom_raw_lower[22]
+                if temp > 128:
+                    return False
+            elif eeprom_raw_lower[0] in QSFP_DD_TYPE_CODE_LIST:
+                temp = eeprom_raw_lower[14]
+                if temp > 128:
+                    return False
+
+            eeprom1 = eeprom1.replace(" ","")
+            eeprom2 = eeprom2.replace(" ","")
+            eeprom3 = eeprom3.replace(" ","")
+
+            for i in range(0, 3):
+                sysfs_sfp_i2c_client_temp_path = eeprom_path_prefix + self.port_to_i2c_mapping[self.index] + '/temp'
+                if i == 0:
+                    sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom1_mapping[self.index]
+                    eeprom = eeprom1
+                elif i == 1:
+                    sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom2_mapping[self.index]
+                    eeprom = eeprom2
+                else:
+                    sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom3_mapping[self.index]
+                    eeprom = eeprom3
+
+                try:
+                    with open(sysfs_sfp_i2c_client_eeprom_path, 'w') as fd:
+                        fd.write(eeprom)
+                        fd.close()
+                    if i == 0:
+                        with open(sysfs_sfp_i2c_client_temp_path, 'w') as fd:
+                            fd.write(temp)
+                            fd.close()
+                except IOError:
+                    fd.close()
+            return True
+        except Exception:
+            return False
+
+    def read_eeprom_buffer(self):
+        with open(PAUSE_EEPROM_SERVICE_STAMP, 'w') as f:
+            f.write("")
+        f.close()
+
+        time.sleep(0.2)
+        rc = self._get_eeprom_by_bmc()
+
+
+        return rc
+
+    def clear_eeprom_buffer(self):
+        for i in range(0, 3):
+            if i == 0:
+                sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom1_mapping[self.index]
+            elif i == 1:
+                sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom2_mapping[self.index]
+            else:
+                sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom3_mapping[self.index]
+            try:
+                with open(sysfs_sfp_i2c_client_eeprom_path, 'w') as fd:
+                    fd.write(" ")
+                    fd.close()
+            except IOError:
+                fd.close()
 
     def _read_eeprom_specific_bytes(self, offset, num_bytes):
         sysfsfile_eeprom = None
@@ -292,9 +497,12 @@ def _read_eeprom_specific_bytes(self, offset, num_bytes):
 
         if offset < 256:
             sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom1_mapping[self.index]
-        else:
+        elif offset < 512:
             sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom2_mapping[self.index]
             offset = offset - 256
+        else:
+            sysfs_sfp_i2c_client_eeprom_path = self.port_to_eeprom3_mapping[self.index]
+            offset = offset - 512
 
         try:
             sysfsfile_eeprom = open(sysfs_sfp_i2c_client_eeprom_path, mode="rb", buffering=0)
@@ -321,8 +529,10 @@ def _detect_sfp_type(self, sfp_type):
         if eeprom_raw:
             if eeprom_raw[0] in QSFP_TYPE_CODE_LIST:
                 self.sfp_type = QSFP_TYPE
+                self.abbrv = type_abbrv_name[eeprom_raw[0]]
             elif eeprom_raw[0] in QSFP_DD_TYPE_CODE_LIST:
                 self.sfp_type = QSFP_DD_TYPE
+                self.abbrv = type_abbrv_name[eeprom_raw[0]]
             else:
                 # we don't regonize this identifier value, treat the xSFP module as the default type
                 self.sfp_type = sfp_type
@@ -333,6 +543,7 @@ def _detect_sfp_type(self, sfp_type):
             # eeprom_raw being None indicates the module is not present.
             # in this case we treat it as the default type according to the SKU
             self.sfp_type = sfp_type
+            self.abbrv = type_abbrv_name['18']
 
     def _dom_capability_detect(self):
         if not self.get_presence():
@@ -342,17 +553,23 @@ def _dom_capability_detect(self):
             self.dom_rx_power_supported = False
             self.dom_tx_bias_power_supported = False
             self.dom_tx_power_supported = False
-            self.dom_channel_monitor_supported = False
             self.dom_module_monitor_supported = False
-            self.dom_channel_treshold_supported = False
-            self.dom_module_treshold_supported =False
             self.calibration = 0
             return
 
-        self.dom_channel_monitor_supported = False
+        self.dom_channel_monitor_supported = True
         self.dom_module_monitor_supported = True
-        self.dom_channel_treshold_supported = False
-        self.dom_module_treshold_supported =False
+        self.dom_channel_threshold_supported = True
+        self.dom_module_threshold_supported = True
+
+
+        self.dom_supported = False
+        self.dom_temp_supported = False
+        self.dom_volt_supported = False
+        self.dom_rx_power_supported = False
+        self.dom_tx_bias_supported = False
+        self.dom_tx_power_supported = False
+        self.dom_thresholds_supported = False
 
         if self.sfp_type == QSFP_TYPE:
             self.calibration = 1
@@ -369,7 +586,7 @@ def _dom_capability_detect(self):
             if qsfp_dom_capability_raw is not None:
                 qsfp_version_compliance_raw = self._read_eeprom_specific_bytes(QSFP_VERSION_COMPLIANCE_OFFSET, QSFP_VERSION_COMPLIANCE_WIDTH)
                 qsfp_version_compliance = int(qsfp_version_compliance_raw[0], 16)
-                dom_capability = sfpi_obj.parse_qsfp_dom_capability(qsfp_dom_capability_raw, 0)
+                dom_capability = sfpi_obj.parse_dom_capability(qsfp_dom_capability_raw, 0)
                 if qsfp_version_compliance >= 0x08:
                     self.dom_temp_supported = dom_capability['data']['Temp_support']['value'] == 'On'
                     self.dom_volt_supported = dom_capability['data']['Voltage_support']['value'] == 'On'
@@ -405,33 +622,36 @@ def _dom_capability_detect(self):
             if sfpi_obj is None:
                 self.dom_supported = False
 
-            offset = 0
+            self.dom_temp_supported = True
+            self.dom_volt_supported = True
+            self.dom_tx_fault_supported = False
+            self.dom_rx_los_supported = False
+
+            offset = 0;
+
             # two types of QSFP-DD cable types supported: Copper and Optical.
             qsfp_dom_capability_raw = self._read_eeprom_specific_bytes((offset + XCVR_DOM_CAPABILITY_OFFSET_QSFP_DD), XCVR_DOM_CAPABILITY_WIDTH_QSFP_DD)
+
             if qsfp_dom_capability_raw is not None:
-                self.dom_temp_supported = True
-                self.dom_volt_supported = True
                 dom_capability = sfpi_obj.parse_dom_capability(qsfp_dom_capability_raw, 0)
                 if dom_capability['data']['Flat_MEM']['value'] == 'Off':
-                    self.dom_supported = False
-                    self.dom_rx_power_supported = False
-                    self.dom_tx_power_supported = False
-                    self.dom_tx_bias_power_supported = False
-                    self.dom_thresholds_supported = False
-                else:
-                    self.dom_supported = False
-                    self.dom_rx_power_supported = False
-                    self.dom_tx_power_supported = False
-                    self.dom_tx_bias_power_supported = False
-                    self.dom_thresholds_supported = False
-            else:
-                self.dom_supported = False
-                self.dom_temp_supported = False
-                self.dom_volt_supported = False
-                self.dom_rx_power_supported = False
-                self.dom_tx_power_supported = False
-                self.dom_tx_bias_power_supported = False
-                self.dom_thresholds_supported = False
+
+                    ext_dd = ext_qsfp_dd()
+                    offset = 256
+                    mon_sup_raw = self._read_eeprom_specific_bytes(offset + QSFP_DD_CHANNL_MON_SUPPORT_OFFSET, QSFP_DD_CHANNL_MON_SUPPORT_WIDTH)
+                    mon_sup_data = ext_dd.parse_mon_capability(mon_sup_raw, 0)
+
+                    self.dom_thresholds_supported = mon_sup_data['data']['Tx_power_support']['value'] == 'On'
+                    self.dom_rx_power_supported = mon_sup_data['data']['Tx_power_support']['value'] == 'On'
+                    self.dom_tx_power_supported = mon_sup_data['data']['Rx_power_support']['value'] == 'On'
+                    self.dom_tx_bias_supported = mon_sup_data['data']['Tx_bias_support']['value'] == 'On'
+                    self.dom_supported = True
+
+                    flags_sup_raw = self._read_eeprom_specific_bytes(offset + QSFP_DD_CHANNL_FLAGS_SUPPORT_OFFSET, QSFP_DD_CHANNL_FLAGS_SUPPORT_WIDTH)
+                    flags_sup_data = ext_dd.parse_flags_capability(flags_sup_raw, 0)
+
+                    self.dom_tx_fault_supported = flags_sup_data['data']['tx_fault']['value'] == 'On'
+                    self.dom_rx_los_supported = flags_sup_data['data']['rx_los']['value'] == 'On'
 
         else:
             self.dom_supported = False
@@ -486,8 +706,19 @@ def get_transceiver_info(self):
         application_advertisement  |1*255VCHAR     |supported applications advertisement
         ================================================================================
         """
+        self.reinit()
+        info_dict_keys = [
+        'type', 'hardware_rev', 'serial', 'manufacturer',
+        'model', 'connector', 'encoding', 'ext_identifier',
+        'ext_rateselect_compliance', 'cable_type', 'cable_length',
+        'nominal_bit_rate', 'specification_compliance', 'vendor_date',
+        'vendor_oui', 'application_advertisement', 'type_abbrv_name']
+
         transceiver_info_dict = {}
         compliance_code_dict = {}
+        transceiver_info_dict = dict.fromkeys(info_dict_keys, "NA")
+        transceiver_info_dict["specification_compliance"] = '{}'
+        transceiver_info_dict['type_abbrv_name'] = self.abbrv
 
         #QSFP
         if self.sfp_type == QSFP_TYPE:
@@ -636,6 +867,7 @@ def get_transceiver_info(self):
                 if sfp_media_type_dict is None:
                     return None
 
+                transceiver_info_dict['specification_compliance'] = type_of_media_interface[sfp_media_type_raw[0]]
                 host_media_list = ""
                 sfp_application_type_first_list = self._read_eeprom_specific_bytes((XCVR_FIRST_APPLICATION_LIST_OFFSET_QSFP_DD), XCVR_FIRST_APPLICATION_LIST_WIDTH_QSFP_DD)
                 possible_application_count = 8
@@ -663,7 +895,6 @@ def get_transceiver_info(self):
             transceiver_info_dict['encoding'] = "Not supported for CMIS cables"
             transceiver_info_dict['ext_identifier'] = str(sfp_ext_identifier_data['data']['Extended Identifier']['value'])
             transceiver_info_dict['ext_rateselect_compliance'] = "Not supported for CMIS cables"
-            transceiver_info_dict['specification_compliance'] = "Not supported for CMIS cables"
             transceiver_info_dict['cable_type'] = "Length Cable Assembly(m)"
             transceiver_info_dict['cable_length'] = str(sfp_cable_len_data['data']['Length Cable Assembly(m)']['value'])
             transceiver_info_dict['nominal_bit_rate'] = "Not supported for CMIS cables"
@@ -700,6 +931,7 @@ def get_transceiver_bulk_status(self):
         TX power                   |INT            |TX output power in mW
         ========================================================================
         """
+        self.reinit()
         transceiver_dom_info_dict = {}
 
         dom_info_dict_keys = ['temperature',    'voltage',
@@ -754,6 +986,10 @@ def get_transceiver_bulk_status(self):
                 dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params_with_tx_power(dom_data_raw[start : end], 0)
 
                 if self.dom_tx_power_supported:
+                    transceiver_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data']['TX1Bias']['value']
+                    transceiver_dom_info_dict['tx2bias'] = dom_channel_monitor_data['data']['TX2Bias']['value']
+                    transceiver_dom_info_dict['tx3bias'] = dom_channel_monitor_data['data']['TX3Bias']['value']
+                    transceiver_dom_info_dict['tx4bias'] = dom_channel_monitor_data['data']['TX4Bias']['value']
                     transceiver_dom_info_dict['tx1power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TX1Power']['value'])
                     transceiver_dom_info_dict['tx2power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TX2Power']['value'])
                     transceiver_dom_info_dict['tx3power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['TX3Power']['value'])
@@ -765,38 +1001,64 @@ def get_transceiver_bulk_status(self):
                     transceiver_dom_info_dict['rx3power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['RX3Power']['value'])
                     transceiver_dom_info_dict['rx4power'] = self._convert_string_to_num(dom_channel_monitor_data['data']['RX4Power']['value'])
 
-                transceiver_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data']['TX1Bias']['value']
-                transceiver_dom_info_dict['tx2bias'] = dom_channel_monitor_data['data']['TX2Bias']['value']
-                transceiver_dom_info_dict['tx3bias'] = dom_channel_monitor_data['data']['TX3Bias']['value']
-                transceiver_dom_info_dict['tx4bias'] = dom_channel_monitor_data['data']['TX4Bias']['value']
 
         #QSFP-DD
         else:
-            offset = 0
             sfpd_obj = qsfp_dd_Dom()
             if sfpd_obj is None:
                 return transceiver_dom_info_dict
 
-            dom_data_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_DOM_BULK_DATA_START), QSFP_DD_DOM_BULK_DATA_SIZE)
-            if dom_data_raw is None:
-                return transceiver_dom_info_dict
-
             if self.dom_module_monitor_supported:
+
                 if self.dom_temp_supported:
-                    start = QSFP_DD_TEMPE_OFFSET - QSFP_DD_DOM_BULK_DATA_START
-                    end = start + QSFP_DD_TEMPE_WIDTH
-                    dom_temperature_data = sfpd_obj.parse_temperature(dom_data_raw[start : end], 0)
+                    offset = 0
+                    dom_data_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TEMPE_OFFSET), QSFP_DD_TEMPE_WIDTH)
+                    dom_temperature_data = sfpd_obj.parse_temperature(dom_data_raw, 0)
                     temp = self._convert_string_to_num(dom_temperature_data['data']['Temperature']['value'])
                     if temp is not None:
                         transceiver_dom_info_dict['temperature'] = temp
 
                 if self.dom_volt_supported:
-                    start = QSFP_DD_VOLT_OFFSET - QSFP_DD_DOM_BULK_DATA_START
-                    end = start + QSFP_DD_VOLT_WIDTH
-                    dom_voltage_data = sfpd_obj.parse_voltage(dom_data_raw[start : end], 0)
+                    offset = 0
+                    dom_data_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_VOLT_OFFSET), QSFP_DD_VOLT_WIDTH)
+                    dom_voltage_data = sfpd_obj.parse_voltage(dom_data_raw, 0)
                     volt = self._convert_string_to_num(dom_voltage_data['data']['Vcc']['value'])
                     if volt is not None:
                         transceiver_dom_info_dict['voltage'] = volt
+            if self.dom_channel_monitor_supported:
+
+                offset = 768
+                dom_data_raw = self._read_eeprom_specific_bytes(offset + (QSFP_DD_CHANNL_MON_OFFSET - 128), QSFP_DD_CHANNL_MON_WIDTH)
+                dom_channel_monitor_data =  sfpd_obj.parse_channel_monitor_params(dom_data_raw, 0)
+                if self.dom_tx_power_supported:
+                    transceiver_dom_info_dict['tx1power'] = dom_channel_monitor_data['data']['TX1Power']['value']
+                    transceiver_dom_info_dict['tx2power'] = dom_channel_monitor_data['data']['TX2Power']['value']
+                    transceiver_dom_info_dict['tx3power'] = dom_channel_monitor_data['data']['TX3Power']['value']
+                    transceiver_dom_info_dict['tx4power'] = dom_channel_monitor_data['data']['TX4Power']['value']
+                    transceiver_dom_info_dict['tx5power'] = dom_channel_monitor_data['data']['TX5Power']['value']
+                    transceiver_dom_info_dict['tx6power'] = dom_channel_monitor_data['data']['TX6Power']['value']
+                    transceiver_dom_info_dict['tx7power'] = dom_channel_monitor_data['data']['TX7Power']['value']
+                    transceiver_dom_info_dict['tx8power'] = dom_channel_monitor_data['data']['TX8Power']['value']
+
+                if self.dom_rx_power_supported:
+                    transceiver_dom_info_dict['rx1power'] = dom_channel_monitor_data['data']['RX1Power']['value']
+                    transceiver_dom_info_dict['rx2power'] = dom_channel_monitor_data['data']['RX2Power']['value']
+                    transceiver_dom_info_dict['rx3power'] = dom_channel_monitor_data['data']['RX3Power']['value']
+                    transceiver_dom_info_dict['rx4power'] = dom_channel_monitor_data['data']['RX4Power']['value']
+                    transceiver_dom_info_dict['rx5power'] = dom_channel_monitor_data['data']['RX5Power']['value']
+                    transceiver_dom_info_dict['rx6power'] = dom_channel_monitor_data['data']['RX6Power']['value']
+                    transceiver_dom_info_dict['rx7power'] = dom_channel_monitor_data['data']['RX7Power']['value']
+                    transceiver_dom_info_dict['rx8power'] = dom_channel_monitor_data['data']['RX8Power']['value']
+
+                if self.dom_tx_bias_supported:
+                    transceiver_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data']['TX1Bias']['value']
+                    transceiver_dom_info_dict['tx2bias'] = dom_channel_monitor_data['data']['TX2Bias']['value']
+                    transceiver_dom_info_dict['tx3bias'] = dom_channel_monitor_data['data']['TX3Bias']['value']
+                    transceiver_dom_info_dict['tx4bias'] = dom_channel_monitor_data['data']['TX4Bias']['value']
+                    transceiver_dom_info_dict['tx5bias'] = dom_channel_monitor_data['data']['TX5Bias']['value']
+                    transceiver_dom_info_dict['tx6bias'] = dom_channel_monitor_data['data']['TX6Bias']['value']
+                    transceiver_dom_info_dict['tx7bias'] = dom_channel_monitor_data['data']['TX7Bias']['value']
+                    transceiver_dom_info_dict['tx8bias'] = dom_channel_monitor_data['data']['TX8Bias']['value']
 
         return transceiver_dom_info_dict
 
@@ -831,6 +1093,7 @@ def get_transceiver_threshold_info(self):
         txbiaslowwarning           |FLOAT          |Low Warning Threshold value of tx Bias Current in mA.
         ========================================================================
         """
+        self.reinit()
         transceiver_dom_threshold_info_dict = {}
 
         dom_info_dict_keys = ['temphighalarm',    'temphighwarning',
@@ -851,9 +1114,7 @@ def get_transceiver_threshold_info(self):
             if not self.dom_supported or not self.qsfp_page3_available:
                 return transceiver_dom_threshold_info_dict
 
-            # Dom Threshold data starts from offset 384
-            # Revert offset back to 0 once data is retrieved
-            offset = QSFP_MODULE_UPPER_PAGE3_START
+            offset = 512
             sfpd_obj = sff8436Dom()
             if sfpd_obj is None:
                 return transceiver_dom_threshold_info_dict
@@ -871,7 +1132,7 @@ def get_transceiver_threshold_info(self):
             dom_channel_threshold_data = sfpd_obj.parse_channel_threshold_values(dom_channel_threshold_raw, 0)
 
             # Threshold Data
-            if self.dom_module_treshold_supported:
+            if self.dom_module_threshold_supported:
                 transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
                 transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
                 transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
@@ -880,7 +1141,7 @@ def get_transceiver_threshold_info(self):
                 transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VccHighWarning']['value']
                 transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VccLowAlarm']['value']
                 transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VccLowWarning']['value']
-            if self.dom_channel_treshold_supported:
+            if self.dom_channel_threshold_supported:
                 transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_channel_threshold_data['data']['RxPowerHighAlarm']['value']
                 transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_channel_threshold_data['data']['RxPowerHighWarning']['value']
                 transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_channel_threshold_data['data']['RxPowerLowAlarm']['value']
@@ -906,8 +1167,8 @@ def get_transceiver_threshold_info(self):
             if sfpd_obj is None:
                 return transceiver_dom_threshold_info_dict
 
-            # page 02 (we put page 2 to byte 256~384)
-            offset = 256
+            # page 02 (we put page 2 to byte 384~511)
+            offset = 384
             dom_module_threshold_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_MODULE_THRESHOLD_OFFSET), QSFP_DD_MODULE_THRESHOLD_WIDTH)
             if dom_module_threshold_raw is None:
                 return transceiver_dom_threshold_info_dict
@@ -915,7 +1176,7 @@ def get_transceiver_threshold_info(self):
             dom_module_threshold_data = sfpd_obj.parse_module_threshold_values(dom_module_threshold_raw, 0)
 
             # Threshold Data
-            if self.dom_module_treshold_supported:
+            if self.dom_module_threshold_supported:
                 transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
                 transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
                 transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
@@ -924,7 +1185,7 @@ def get_transceiver_threshold_info(self):
                 transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VccHighWarning']['value']
                 transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VccLowAlarm']['value']
                 transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VccLowWarning']['value']
-            if self.dom_channel_treshold_supported:
+            if self.dom_channel_threshold_supported:
                 transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_module_threshold_data['data']['RxPowerHighAlarm']['value']
                 transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_module_threshold_data['data']['RxPowerHighWarning']['value']
                 transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_module_threshold_data['data']['RxPowerLowAlarm']['value']
@@ -974,12 +1235,12 @@ def get_rx_los(self):
 
         #QSFP-DD
         else:
-            # page 11h (we put page 2 to byte 384~512)
-            if self.dom_rx_tx_power_bias_supported:
-                offset = 384
+            # page 11h (we put page 11 to byte 768~895)
+            if self.dom_rx_los_supported:
+                offset = 768
                 dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_CHANNL_RX_LOS_STATUS_OFFSET), QSFP_DD_CHANNL_RX_LOS_STATUS_WIDTH)
                 if dom_channel_monitor_raw is not None:
-                    rx_los_data = int(dom_channel_monitor_raw[0], 8)
+                    rx_los_data = int(dom_channel_monitor_raw[0], 16)
                     rx_los_list.append(rx_los_data & 0x01 != 0)
                     rx_los_list.append(rx_los_data & 0x02 != 0)
                     rx_los_list.append(rx_los_data & 0x04 != 0)
@@ -999,6 +1260,7 @@ def get_tx_fault(self):
             A Boolean, True if SFP has TX fault, False if not
             Note : TX fault status is lached until a call to get_tx_fault or a reset.
         """
+        self.reinit()
         if not self.dom_supported:
             return None
 
@@ -1016,7 +1278,20 @@ def get_tx_fault(self):
 
         #QSFP-DD
         else:
-            return None
+            # page 11h (we put page 11 to byte 768~895)
+            if self.dom_tx_fault_supported:
+                offset = 768
+                dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_CHANNL_TX_FAULT_STATUS_OFFSET), QSFP_DD_CHANNL_TX_FAULT_STATUS_WIDTH)
+                if dom_channel_monitor_raw is not None:
+                    tx_fault_data = int(dom_channel_monitor_raw[0], 16)
+                    tx_fault_list.append(tx_fault_data & 0x01 != 0)
+                    tx_fault_list.append(tx_fault_data & 0x02 != 0)
+                    tx_fault_list.append(tx_fault_data & 0x04 != 0)
+                    tx_fault_list.append(tx_fault_data & 0x08 != 0)
+                    tx_fault_list.append(tx_fault_data & 0x10 != 0)
+                    tx_fault_list.append(tx_fault_data & 0x20 != 0)
+                    tx_fault_list.append(tx_fault_data & 0x40 != 0)
+                    tx_fault_list.append(tx_fault_data & 0x80 != 0)
 
         return tx_fault_list
 
@@ -1031,6 +1306,7 @@ def get_tx_disable(self):
         for SFP, the TX Disable State and Soft TX Disable Select is ORed as the tx_disable status returned
                  These two bits are bit 7 & 6 in byte 110 page a2 respectively
         """
+        self.reinit()
         if not self.dom_supported:
             return None
 
@@ -1048,20 +1324,19 @@ def get_tx_disable(self):
 
         #QSFP-DD
         else:
-            if self.dom_rx_tx_power_bias_supported:
-                # page 11h (we put page 1 to byte 384~512)
-                offset = 384
-                dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_CHANNL_DISABLE_STATUS_OFFSET), QSFP_DD_CHANNL_DISABLE_STATUS_WIDTH)
-                if dom_channel_monitor_raw is not None:
-                    tx_disable_data = int(dom_channel_monitor_raw[0], 16)
-                    tx_disable_list.append(tx_disable_data & 0x01 != 0)
-                    tx_disable_list.append(tx_disable_data & 0x02 != 0)
-                    tx_disable_list.append(tx_disable_data & 0x04 != 0)
-                    tx_disable_list.append(tx_disable_data & 0x08 != 0)
-                    tx_disable_list.append(tx_disable_data & 0x10 != 0)
-                    tx_disable_list.append(tx_disable_data & 0x20 != 0)
-                    tx_disable_list.append(tx_disable_data & 0x40 != 0)
-                    tx_disable_list.append(tx_disable_data & 0x80 != 0)
+            # page 10h (we put page 10 to byte 640~767)
+            offset = 640
+            dom_channel_monitor_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_CHANNL_DISABLE_STATUS_OFFSET), QSFP_DD_CHANNL_DISABLE_STATUS_WIDTH)
+            if dom_channel_monitor_raw is not None:
+                tx_disable_data = int(dom_channel_monitor_raw[0], 16)
+                tx_disable_list.append(tx_disable_data & 0x01 != 0)
+                tx_disable_list.append(tx_disable_data & 0x02 != 0)
+                tx_disable_list.append(tx_disable_data & 0x04 != 0)
+                tx_disable_list.append(tx_disable_data & 0x08 != 0)
+                tx_disable_list.append(tx_disable_data & 0x10 != 0)
+                tx_disable_list.append(tx_disable_data & 0x20 != 0)
+                tx_disable_list.append(tx_disable_data & 0x40 != 0)
+                tx_disable_list.append(tx_disable_data & 0x80 != 0)
 
         return tx_disable_list
 
@@ -1083,8 +1358,17 @@ def get_lpmode(self):
         Returns:
             A Boolean, True if lpmode is enabled, False if disabled
         """
-        # SFP doesn't support this feature
-        return False
+        lpmode = False
+        try:
+            if self.index < 16:
+                lpmode_path=self.LPMODE_1_16_PATH.format(self.port_num)
+            else:
+                lpmode_path=self.LPMODE_17_32_PATH.format(self.port_num)
+            with open(lpmode_path, 'r') as sfp_lpmode:
+                lpmode = int(sfp_lpmode.read(), 16)
+        except IOError:
+            return False
+        return lpmode == 1
 
     def get_power_override(self):
         """
@@ -1102,6 +1386,7 @@ def get_temperature(self):
         Returns:
             An integer number of current temperature in Celsius
         """
+        self.reinit()
         if not self.dom_supported:
             return None
         #QSFP
@@ -1146,6 +1431,7 @@ def get_voltage(self):
         Returns:
             An integer number of supply voltage in mV
         """
+        self.reinit()
         if not self.dom_supported:
             return None
 
@@ -1192,6 +1478,7 @@ def get_tx_bias(self):
             for channel 0 to channel 4.
             Ex. ['110.09', '111.12', '108.21', '112.09']
         """
+        self.reinit()
         tx_bias_list = []
 
         #QSFP
@@ -1212,25 +1499,24 @@ def get_tx_bias(self):
 
         #QSFP-DD
         else:
-            # page 11h (we put page 1 to byte 384~512)
-            if self.dom_rx_tx_power_bias_supported:
-                offset = 384
+            # page 11h (we put page 1 to byte 768~895)
+            if dom_tx_bias_power_supported:
+                offset = 768
                 sfpd_obj = qsfp_dd_Dom()
                 if sfpd_obj is None:
                     return None
 
-                if dom_tx_bias_power_supported:
-                    dom_tx_bias_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TX_BIAS_OFFSET), QSFP_DD_TX_BIAS_WIDTH)
-                    if dom_tx_bias_raw is not None:
-                        dom_tx_bias_data = sfpd_obj.parse_dom_tx_bias(dom_tx_bias_raw, 0)
-                        tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX1Bias']['value']))
-                        tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX2Bias']['value']))
-                        tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX3Bias']['value']))
-                        tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX4Bias']['value']))
-                        tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX5Bias']['value']))
-                        tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX6Bias']['value']))
-                        tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX7Bias']['value']))
-                        tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX8Bias']['value']))
+                dom_tx_bias_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TX_BIAS_OFFSET), QSFP_DD_TX_BIAS_WIDTH)
+                if dom_tx_bias_raw is not None:
+                    dom_tx_bias_data = sfpd_obj.parse_dom_tx_bias(dom_tx_bias_raw, 0)
+                    tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX1Bias']['value']))
+                    tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX2Bias']['value']))
+                    tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX3Bias']['value']))
+                    tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX4Bias']['value']))
+                    tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX5Bias']['value']))
+                    tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX6Bias']['value']))
+                    tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX7Bias']['value']))
+                    tx_bias_list.append(self._convert_string_to_num(dom_tx_bias_data['data']['TX8Bias']['value']))
 
         return tx_bias_list
 
@@ -1243,6 +1529,7 @@ def get_rx_power(self):
             power in mW for channel 0 to channel 4.
             Ex. ['1.77', '1.71', '1.68', '1.70']
         """
+        self.reinit()
         rx_power_list = []
 
         #QSFP
@@ -1268,25 +1555,24 @@ def get_rx_power(self):
 
         #QSFP-DD
         elif self.sfp_type == QSFP_DD_TYPE:
-            # page 11h (we put page 1 to byte 384~512)
-            if self.dom_rx_tx_power_bias_supported:
-                offset = 384
+            # page 11h (we put page 11 to byte 768~895)
+            if self.dom_rx_power_supported:
+                offset = 768
                 sfpd_obj = qsfp_dd_Dom()
                 if sfpd_obj is None:
                     return None
 
-                if self.dom_rx_power_supported:
-                    dom_rx_power_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_RX_POWER_OFFSET), QSFP_DD_RX_POWER_WIDTH)
-                    if dom_rx_power_raw is not None:
-                        dom_rx_power_data = sfpd_obj.parse_dom_rx_power(dom_rx_power_raw, 0)
-                        rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX1Power']['value']))
-                        rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX2Power']['value']))
-                        rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX3Power']['value']))
-                        rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX4Power']['value']))
-                        rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX5Power']['value']))
-                        rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX6Power']['value']))
-                        rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX7Power']['value']))
-                        rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX8Power']['value']))
+                dom_rx_power_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_RX_POWER_OFFSET), QSFP_DD_RX_POWER_WIDTH)
+                if dom_rx_power_raw is not None:
+                    dom_rx_power_data = sfpd_obj.parse_dom_rx_power(dom_rx_power_raw, 0)
+                    rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX1Power']['value']))
+                    rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX2Power']['value']))
+                    rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX3Power']['value']))
+                    rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX4Power']['value']))
+                    rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX5Power']['value']))
+                    rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX6Power']['value']))
+                    rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX7Power']['value']))
+                    rx_power_list.append(self._convert_string_to_num(dom_rx_power_data['data']['RX8Power']['value']))
 
         return rx_power_list
 
@@ -1299,6 +1585,7 @@ def get_tx_power(self):
             for channel 0 to channel 4.
             Ex. ['1.86', '1.86', '1.86', '1.86']
         """
+        self.reinit()
         tx_power_list = []
 
         #QSFP
@@ -1324,25 +1611,24 @@ def get_tx_power(self):
 
         #QSFP-DD
         else:
-            # page 11h (we put page 1 to byte 384~512)
-            if self.dom_rx_tx_power_bias_supported:
-                offset = 384
+            # page 11h (we put page 11 to byte 768~895)
+            if self.dom_tx_power_supported:
+                offset = 768
                 sfpd_obj = qsfp_dd_Dom()
                 if sfpd_obj is None:
                     return None
 
-                if self.dom_tx_power_supported:
-                    dom_tx_power_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TX_POWER_OFFSET), QSFP_DD_TX_POWER_WIDTH)
-                    if dom_tx_power_raw is not None:
-                        dom_tx_power_data = sfpd_obj.parse_dom_tx_power(dom_tx_power_raw, 0)
-                        tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX1Power']['value']))
-                        tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX2Power']['value']))
-                        tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX3Power']['value']))
-                        tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX4Power']['value']))
-                        tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX5Power']['value']))
-                        tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX6Power']['value']))
-                        tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX7Power']['value']))
-                        tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX8Power']['value']))
+                dom_tx_power_raw = self._read_eeprom_specific_bytes((offset + QSFP_DD_TX_POWER_OFFSET), QSFP_DD_TX_POWER_WIDTH)
+                if dom_tx_power_raw is not None:
+                    dom_tx_power_data = sfpd_obj.parse_dom_tx_power(dom_tx_power_raw, 0)
+                    tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX1Power']['value']))
+                    tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX2Power']['value']))
+                    tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX3Power']['value']))
+                    tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX4Power']['value']))
+                    tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX5Power']['value']))
+                    tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX6Power']['value']))
+                    tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX7Power']['value']))
+                    tx_power_list.append(self._convert_string_to_num(dom_tx_power_data['data']['TX8Power']['value']))
 
         return tx_power_list
 
@@ -1352,8 +1638,22 @@ def reset(self):
         Returns:
             A boolean, True if successful, False if not
         """
-        # SFP doesn't support this feature
-        return False
+        try:
+            if self.index < 16:
+                file_path=self.RESET_1_16_PATH.format(self.port_num)
+            else:
+                file_path=self.RESET_17_32_PATH.format(self.port_num)
+
+            with open(file_path, 'w') as fd:
+                fd.write(str(1))
+                time.sleep(1)
+                fd.write(str(0))
+                time.sleep(1)
+
+        except IOError:
+            return False
+
+        return True
 
     def tx_disable(self, tx_disable):
         """
@@ -1390,8 +1690,18 @@ def set_lpmode(self, lpmode):
         Returns:
             A boolean, True if lpmode is set successfully, False if not
         """
-        # SFP doesn't support this feature
-        return False
+        try:
+            if self.index < 16:
+                lpmode_path=self.LPMODE_1_16_PATH.format(self.port_num)
+            else:
+                lpmode_path=self.LPMODE_17_32_PATH.format(self.port_num)
+            val_file = open(lpmode_path, 'w')
+            val_file.write('1' if lpmode else '0')
+            val_file.close()
+            return True
+        except IOError:
+            val_file.close()
+            return False
 
     def set_power_override(self, power_override, power_set):
         """
@@ -1420,7 +1730,7 @@ def get_name(self):
             string: The name of the device
         """
 
-        name='port'+str(self.index)
+        name='port'+str(self.index + 1)
         return name
 
     def get_model(self):
@@ -1441,3 +1751,40 @@ def get_serial(self):
         transceiver_dom_info_dict = self.get_transceiver_info()
         return transceiver_dom_info_dict.get("serial", "N/A")
 
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        return self.get_presence() and not self.get_reset_status()
+
+    def get_position_in_parent(self):
+        """
+        Returns:
+            Temp return 0
+        """
+        return 0
+
+    def is_replaceable(self):
+        """
+        Retrieves if replaceable
+        Returns:
+            A boolean value, True if replaceable
+        """
+        return True
+
+    def get_error_description(self):
+        """
+        Get error description
+
+        Args:
+            error_code: The error code returned by _get_error_code
+
+        Returns:
+            The error description
+        """
+        if self.get_presence():
+            return self.SFP_STATUS_OK
+        else:
+            return self.SFP_STATUS_UNPLUGGED
diff --git a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/thermal.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/thermal.py
old mode 100644
new mode 100755
similarity index 61%
rename from device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/thermal.py
rename to platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/thermal.py
index 942e6b7be347..73228ce8f0ac
--- a/device/wistron/x86_64-wistron_6512_32r-r0/sonic_platform/thermal.py
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/thermal.py
@@ -15,7 +15,6 @@
 except ImportError as e:
     raise ImportError(str(e) + "- required module not found")
 
-
 class Thermal(ThermalBase):
     """Platform-specific Thermal class"""
 
@@ -42,6 +41,8 @@ def __init__(self, thermal_index):
         self.THERMAL_NAME_LIST.append("UCPUB")
         self.THERMAL_NAME_LIST.append("UFANB")
         ThermalBase.__init__(self)
+        self.minimum_thermal = self.get_temperature()
+        self.maximum_thermal = self.get_temperature()
 
     def __read_txt_file(self, file_path):
         try:
@@ -50,13 +51,24 @@ def __read_txt_file(self, file_path):
                 return data.strip()
         except IOError:
             pass
-        return ""
+        return None
 
     def __get_temp(self, temp_file):
         temp_file_path = os.path.join(self.SYSFS_THERMAL_DIR[self.index], temp_file)
         raw_temp = self.__read_txt_file(temp_file_path)
-        temp = float(raw_temp)/1000
-        return "{:.3f}".format(temp)
+        if raw_temp is not None:
+            return float(raw_temp)/1000
+        else:
+            return 0.0
+
+    def __set_threshold(self, file_name, temperature):
+        temp_file_path = os.path.join(self.SYSFS_THERMAL_DIR[self.index], file_name)
+        try:
+            with open(temp_file_path, 'w') as fd:
+                fd.write(str(temperature))
+            return True
+        except IOError:
+            return False
 
     def get_temperature(self):
         """
@@ -74,7 +86,8 @@ def get_low_threshold(self):
         :return: A float number, the low threshold temperature of thermal in Celsius
                  up to nearest thousandth of one degree Celsius, e.g. 30.125
         """
-        return int(3)
+        # work temperatur is 0~40, hyst is 2
+        return 2.0
 
     def get_low_critical_threshold(self):
         """
@@ -82,7 +95,8 @@ def get_low_critical_threshold(self):
         :return: A float number, the low critical threshold temperature of thermal in Celsius
                  up to nearest thousandth of one degree Celsius, e.g. 30.125
         """
-        return int(0)
+        # work temperatur is 0~40
+        return 0.0
 
     def get_high_threshold(self):
         """
@@ -120,7 +134,7 @@ def get_presence(self):
             bool: True if PSU is present, False if not
         """
         temp_file = "temp1_input"
-        temp_file_path = os.path.join(self.hwmon_path, temp_file)
+        temp_file_path = os.path.join(self.SYSFS_THERMAL_DIR[self.index], temp_file)
         return os.path.isfile(temp_file_path)
 
     def get_status(self):
@@ -134,3 +148,63 @@ def get_status(self):
 
         return True
 
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+        return "None"
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of the device
+        Returns:
+            string: Serial number of device
+        """
+        return "None"
+
+    def is_replaceable(self):
+        """
+        Retrieves whether thermal module is replaceable
+        Returns:
+            A boolean value, True if replaceable, False if not
+        """
+        return False
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device.
+        If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of
+        entPhysicalContainedIn is'0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device
+            or -1 if cannot determine the position
+        """
+        return self.index + 1
+
+    def get_minimum_recorded(self):
+        """
+        Retrieves the minimum recorded temperature of thermal
+        Returns:
+            A float number, the minimum recorded temperature of thermal in Celsius
+            up to nearest thousandth of one degree Celsius, e.g. 30.125
+        """
+        tmp = self.get_temperature()
+        if tmp < self.minimum_thermal:
+            self.minimum_thermal = tmp
+        return self.minimum_thermal
+
+    def get_maximum_recorded(self):
+        """
+        Retrieves the maximum recorded temperature of thermal
+        Returns:
+            A float number, the maximum recorded temperature of thermal in Celsius
+            up to nearest thousandth of one degree Celsius, e.g. 30.125
+        """
+        tmp = self.get_temperature()
+        if tmp > self.maximum_thermal:
+            self.maximum_thermal = tmp
+        return self.maximum_thermal
+
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/watchdog.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/watchdog.py
new file mode 100755
index 000000000000..fb7987bdd682
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/sonic_platform/watchdog.py
@@ -0,0 +1,184 @@
+#!/usr/bin/env python
+
+########################################################################
+#
+# Abstract base class for implementing a platform-specific class with
+# which to interact with a hardware watchdog module in SONiC
+#
+########################################################################
+
+try:
+    import subprocess
+    from sonic_platform_base.watchdog_base import WatchdogBase
+    from shlex import split
+    from collections import namedtuple
+    from functools import reduce
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
+
+proc_output = namedtuple('proc_output', 'stdout stderr')
+
+WDT_COMMON_ERROR = -1
+
+IPMI_WDT_EN_KICK_CMD = ["ipmitool", "mc", "watchdog", "reset"]
+IPMI_WDT_OFF_CMD = ["ipmitool", "mc", "watchdog", "off"]
+IPMI_WDT_SET_TIMEOUT_CMD = ["ipmitool", "raw", "0x6", "0x24", "0x4", "0x0", "0x0", "0x0"]
+#IPMI_WDT_GET_TIMEOUT_CMD = "ipmitool mc watchdog get | grep Present | awk '{print $3}'"
+#IPMI_WDT_GET_STATUS_CMD = "ipmitool mc watchdog get | grep 'Timer Is' | awk '{printf $4}'"
+
+class Watchdog(WatchdogBase):
+    """
+    Abstract base class for interfacing with a hardware watchdog module
+    """
+
+    def __init__(self):
+        # Set default value
+        self.armed = self._get_status()
+        self.timeout = self._gettimeout()
+
+    def pipeline(self, starter_command, *commands):
+        if not commands:
+            try:
+                starter_command, *commands = starter_command.split('|')
+            except AttributeError:
+                pass
+        starter_command = self._parse(starter_command)
+        starter = subprocess.Popen(starter_command, stdout=subprocess.PIPE)
+        last_proc = reduce(self._create_pipe, map(self._parse, commands), starter)
+        return proc_output(*last_proc.communicate())
+
+    def _create_pipe(self, previous, command):
+        proc = subprocess.Popen(command, stdin=previous.stdout, stdout=subprocess.PIPE)
+        previous.stdout.close()
+        return proc
+
+    def _parse(self, cmd):
+        try:
+            return split(cmd)
+        except Exception:
+            return cmd
+
+    def _get_status(self):
+        #IPMI_WDT_GET_STATUS_CMD
+        out, err = self.pipeline("ipmitool mc watchdog get", "grep 'Timer Is'", "awk '{print $4}'")
+        status_str = out.decode().rstrip('\n')
+
+        if "Running" in status_str:
+            return True
+
+        return False
+
+    def _enable(self):
+        """
+        Turn on the watchdog timer
+        """
+        p = subprocess.Popen(IPMI_WDT_EN_KICK_CMD, stdout=subprocess.PIPE)
+        p.communicate()
+        return 0
+
+    def _disable(self):
+        """
+        Turn off the watchdog timer
+        """
+        p = subprocess.Popen(IPMI_WDT_OFF_CMD, stdout=subprocess.PIPE)
+        p.communicate()
+        return 0
+
+    def _keepalive(self):
+        """
+        Keep alive watchdog timer
+        """
+        p = subprocess.Popen(IPMI_WDT_EN_KICK_CMD, stdout=subprocess.PIPE)
+        p.communicate()
+        return 0
+
+    def _settimeout(self, seconds):
+        """
+        Set watchdog timer timeout
+        @param seconds - timeout in seconds
+        @return is the actual set timeout
+        """
+        ipmi_timeout = seconds * 10;
+        cmd = ["ipmitool", "raw", "0x6", "0x24", "0x4", "0x0", "0x0", "0x0"]
+        cmd.append(str(ipmi_timeout % 256))
+        cmd.append(str(int(ipmi_timeout / 256)))
+        p = subprocess.Popen(cmd, stdout=subprocess.PIPE)
+        p.communicate()
+
+        return seconds
+
+    def _gettimeout(self):
+        #IPMI_WDT_GET_TIMEOUT_CMD
+        out, err = self.pipeline("ipmitool mc watchdog get", "grep Present", "awk '{print $3}'")
+        return int(out.decode().rstrip('\n'), 10)
+
+    def arm(self, seconds):
+        """
+        Arm the hardware watchdog with a timeout of <seconds> seconds.
+        If the watchdog is currently armed, calling this function will
+        simply reset the timer to the provided value. If the underlying
+        hardware does not support the value provided in <seconds>, this
+        method should arm the watchdog with the *next greater* available
+        value.
+        Returns:
+            An integer specifying the *actual* number of seconds the watchdog
+            was armed with. On failure returns -1.
+        """
+        ret = WDT_COMMON_ERROR
+
+        if seconds < 0 or seconds > 500:
+            return ret
+
+        try:
+            if self.timeout != seconds:
+                self.timeout = self._settimeout(seconds)
+
+            if self.armed:
+                self._keepalive()
+            else:
+                self._enable()
+
+            ret = self.timeout
+        except IOError as e:
+            print("Error: unable to enable wdt due to : {}".format(e))
+
+        return ret
+
+    def disarm(self):
+        """
+        Disarm the hardware watchdog
+        Returns:
+            A boolean, True if watchdog is disarmed successfully, False if not
+        """
+        disarmed = False
+        try:
+            self._disable()
+            self.armed = False
+            disarmed = True
+        except IOError as e:
+            print("Error: unable to disable wdt due to : {}".format(e))
+        return disarmed
+
+    def is_armed(self):
+        """
+        Retrieves the armed state of the hardware watchdog.
+        Returns:
+            A boolean, True if watchdog is armed, False if not
+        """
+        return self.armed
+
+    def get_remaining_time(self):
+        """
+        If the watchdog is armed, retrieve the number of seconds remaining on
+        the watchdog timer
+        Returns:
+            An integer specifying the number of seconds remaining on thei
+            watchdog timer. If the watchdog is not armed, returns -1.
+        """
+
+        timeleft = WDT_COMMON_ERROR
+
+        if self.armed:
+            return self._gettimeout()
+
+        return timeleft
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_firmware_version b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_firmware_version
new file mode 100755
index 000000000000..1fe70c7f4310
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_firmware_version
@@ -0,0 +1,17 @@
+#!/bin/bash
+cpld1_ver=$(ipmitool raw 0x30 0x25 0x0 0xc 0x1 0x0 2>>/dev/null | awk '{printf $1}')
+cpld2_ver=$(ipmitool raw 0x30 0x25 0x0 0xe 0x1 0x0 2>>/dev/null | awk '{printf $1}')
+fpga_ver=$(ipmitool raw 0x30 0x25 0x0 0x60 0x1 0x0 2>>/dev/null | awk '{printf $1}')
+cpld1_ver=$( printf "%d" 0x$cpld1_ver )
+cpld2_ver=$( printf "%d" 0x$cpld2_ver )
+fpga_ver=$( printf "%d" 0x$fpga_ver )
+cpld1_ver_path="/sys/bus/i2c/devices/0-0006/version"
+cpld2_ver_path="/sys/bus/i2c/devices/0-0007/version"
+fpga_ver_path="/sys/bus/i2c/devices/0-0030/version"
+
+echo $cpld1_ver > $cpld1_ver_path
+echo $cpld2_ver > $cpld2_ver_path
+echo $fpga_ver > $fpga_ver_path
+
+exit 0
+
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_sync b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_sync
old mode 100644
new mode 100755
index 9c357e7ac7e8..071339cac9d3
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_sync
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_sync
@@ -3,5 +3,7 @@
 /usr/local/bin/sonic-led-monitor &
 /usr/local/bin/sonic-qsfp-monitor &
 /usr/local/bin/sonic-psu-monitor &
+/usr/local/bin/sonic-qsfp-eeprom-monitor &
+/usr/local/bin/sonic-send-temp-to-bmc &
 exit 0
 
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_syseeprom b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_syseeprom
old mode 100644
new mode 100755
index 2db0a921cb9a..4a19db909864
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_syseeprom
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/platform_syseeprom
@@ -1,10 +1,15 @@
 #!/bin/bash
-eeprom_part1=$(ipmitool raw 0x30 0x25 0x00 0xaa 0x80 0x0 2>>/dev/null)
-eeprom_part2=$(ipmitool raw 0x30 0x25 0x00 0xaa 0x80 0x80 2>>/dev/null)
-eeprom1_full=$eeprom_part1$eeprom_part2
-eeprom1_full=$(echo $eeprom1_full | sed 's/[[:space:]]//g')
-eeprom1_path="/sys/bus/i2c/devices/0-0055/eeprom"
-eeprom1_full=$(echo $eeprom1_full | sed -e 's/ //g')
-echo $eeprom1_full > $eeprom1_path
+board_ver=$(i2cget -f -y 0 0x55 0x0 1>/dev/null 2>/dev/null; echo $?)
+
+if [ $board_ver != 0 ]; then
+	eeprom_part1=$(ipmitool raw 0x30 0x25 0x00 0xaa 0x80 0x0 2>>/dev/null)
+	eeprom_part2=$(ipmitool raw 0x30 0x25 0x00 0xaa 0x80 0x80 2>>/dev/null)
+	eeprom1_full=$eeprom_part1$eeprom_part2
+	eeprom1_full=$(echo $eeprom1_full | sed 's/[[:space:]]//g')
+	eeprom1_path="/sys/bus/i2c/devices/0-0055/eeprom"
+	eeprom1_full=$(echo $eeprom1_full | sed -e 's/ //g')
+	echo $eeprom1_full > $eeprom1_path
+fi
+
 exit 0
 
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-fanthrml-monitor b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-fanthrml-monitor
old mode 100644
new mode 100755
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-led-monitor b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-led-monitor
old mode 100644
new mode 100755
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-psu-monitor b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-psu-monitor
old mode 100644
new mode 100755
index 180456f6a8aa..793e022823cb
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-psu-monitor
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-psu-monitor
@@ -44,13 +44,8 @@ add_byte(){
 # string_read [start byte] [length]
 string_read(){
 	value=""
-	len=$(echo $val | awk '{print $'"$1"'}')
-	byte_hex_test $len
-	if [ $? -eq 0 ]; then
-		return 0
-	fi
-	len=$(printf "%d" 0x$len)
-	s=$(($1 + 1))
+	len=$2
+	s=$(($1))
 	e=$(($1 + len - 1))
 	for i in $(seq $s $e)
 	do
@@ -189,6 +184,17 @@ get_PSU_information()
 		if [ $? -eq 1 ];then
 			echo $value > /sys/bus/i2c/devices/0-0059/fault
 		fi
+
+		byte_read 41
+		if [ $? -eq 1 ];then
+			echo $value > /sys/bus/i2c/devices/0-005a/pwm
+		fi
+
+		byte_read 42
+		if [ $? -eq 1 ];then
+			echo $value > /sys/bus/i2c/devices/0-0059/pwm
+		fi
+
 	fi
 
 	#____________________________________________________________________________
@@ -196,35 +202,46 @@ get_PSU_information()
 	val=$(ipmitool raw 0x30 0x8a 2>>/dev/null)
 	if [ -e /sys/bus/i2c/devices/0-005a/vendor ] && [ -e /sys/bus/i2c/devices/0-0059/vendor ];then
 		#PSU1 mfr_ID
-		string_read 1
+		string_read 1 20
 		if [ $? -eq 1 ];then
 			echo $value > /sys/bus/i2c/devices/0-005a/vendor
 		fi
 		#PSU2 mfr_ID
-		string_read 21
+		string_read 21 20
 		if [ $? -eq 1 ];then
 			echo $value > /sys/bus/i2c/devices/0-0059/vendor
 		fi
 		#PSU1 mfr_model
-		string_read 41
+		string_read 41 20
 		if [ $? -eq 1 ];then
 			echo $value > /sys/bus/i2c/devices/0-005a/model
 		fi
 		#PSU2 mfr_model
-		string_read 61
+		string_read 61 20
 		if [ $? -eq 1 ];then
 			echo $value > /sys/bus/i2c/devices/0-0059/model
 		fi
 		#PSU1 mfr_serial
-		string_read 81
+		string_read 81 30
 		if [ $? -eq 1 ];then
 			echo $value > /sys/bus/i2c/devices/0-005a/sn
 		fi
-		#PSU1 mfr_serial
-		string_read 111
+		#PSU2 mfr_serial
+		string_read 111 30
 		if [ $? -eq 1 ];then
 			echo $value > /sys/bus/i2c/devices/0-0059/sn
 		fi
+
+		#PSU1 mfr_rev
+		string_read 141 2
+		if [ $? -eq 1 ];then
+			echo $value > /sys/bus/i2c/devices/0-005a/rev
+		fi
+		#PSU2 mfr_serial
+		string_read 143 2
+		if [ $? -eq 1 ];then
+			echo $value > /sys/bus/i2c/devices/0-0059/rev
+		fi
 	fi
 }
 
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-qsfp-eeprom-monitor b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-qsfp-eeprom-monitor
new file mode 100755
index 000000000000..a7213e3a9260
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-qsfp-eeprom-monitor
@@ -0,0 +1,596 @@
+#!/bin/bash
+
+debug_flag=0
+port_map=('00' '10' '11' '12' '13' '14' '15' '16' '17' '18' '19' '1a' '1b' '1c' '1d' '1e' '1f' '20' '21' '22' '23' '24' '25' '26' '27' '28' '29' '2a' '2b' '2c' '2d' '2e' '2f')
+
+port_init=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
+
+port_sfp_type=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
+
+board_ver=$(ipmitool raw 0x30 0x25 0x1 0xe0 0x1 0x0 1>/dev/null 2>/dev/null; echo $?) #error will get 1 means EVT, otherwise DVT
+
+
+byte_hex_test()
+{
+	if ! [[ $1  =~ ^[0-9A-Fa-f]{2}$ ]] ; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+pmon_status_check()
+{
+	output=$( docker inspect -f '{{.State.Status}}' pmon 2>/dev/null)
+	if [ $? -eq 0 ]; then
+		if [ $output == 'running' ]; then
+			return 1
+		else
+			return 0
+		fi
+	else
+		return 0
+	fi
+}
+
+#$1=mux $2=channel $3=dev_addr, $4=reg, $5=val
+bmc_write()
+{
+	if [ $board_ver == 1 ]; then
+		addr_8b=$(echo $(($3)) | awk '{printf $1}')
+		addr_8b=`expr $addr_8b \\* 2`
+		ipmitool raw 0x30 0x85 $1 $2 $addr_8b 2 $4 $5 1>>/dev/null 2>>/dev/null
+		sleep 1
+		ipmitool raw 0x30 0x87 1>>/dev/null 2>>/dev/null
+	else
+		pmon_status_check
+		if [ $? -eq 1 ]; then
+			while [ $(docker exec pmon bash -c 'if [ -e /tmp/pause_eeprom_polling ]; then echo 1; else echo 0; fi') == '1' ]; do
+				sleep 0.1;
+			done
+		fi
+		mux_addr=$(((0x70 + $1 - 2) * 2))
+		chan=$((1 << $2))
+		addr_8b=$(echo $(($3)) | awk '{printf $1}')
+		addr_8b=`expr $addr_8b \\* 2`
+		ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 $chan  1>>/dev/null 2>>/dev/null
+		ipmitool raw 0x30 0x25 0x1 $addr_8b 0x0 $4 $5  1>>/dev/null 2>>/dev/null
+		ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 0x0  1>>/dev/null 2>>/dev/null
+	fi
+}
+
+#$1=mux $2=channel $3=dev_addr, $4=reg, $5=len
+bmc_read()
+{
+	if [ $board_ver == 1 ]; then
+		addr_8b=$(echo $(($3)) | awk '{printf $1}')
+		addr_8b=`expr $addr_8b \\* 2`
+		ipmitool raw 0x30 0x86 $1 $2 $addr_8b $5 $4 1>>/dev/null 2>>/dev/null
+		sleep 1
+		val=$(ipmitool raw 0x30 0x87 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$val
+			return 1
+		else
+			return 0
+		fi
+	else
+		mux_addr=$(((0x70 + $1 - 2) * 2))
+		chan=$((1 << $2))
+		addr_8b=$(echo $(($3)) | awk '{printf $1}')
+		addr_8b=`expr $addr_8b \\* 2`
+		ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 $chan  1>>/dev/null 2>>/dev/null
+		val=$(ipmitool raw 0x30 0x25 0x1 $addr_8b $5 $4 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$val
+			ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 0x0  1>>/dev/null 2>>/dev/null
+			return 1
+		else
+			ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 0x0  1>>/dev/null 2>>/dev/null
+			return 0
+		fi
+	fi
+}
+
+
+bmc_dump()
+{
+	err=0
+	mux_addr=$(((0x70 + $1 - 2) * 2))
+	chan=$((1 << $2))
+	ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 $chan  1>>/dev/null 2>>/dev/null
+
+	ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x0  1>>/dev/null 2>>/dev/null
+	val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x0 2>>/dev/null)
+	if [ $? -eq 0 ];then
+		result1=$val
+	else
+		err=1
+	fi
+
+	val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x80 2>>/dev/null)
+	if [ $? -eq 0 ];then
+		result2=$val
+	else
+		err=1
+	fi
+
+	ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x1  1>>/dev/null 2>>/dev/null
+	val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x80 2>>/dev/null)
+	if [ $? -eq 0 ];then
+		result3=$val
+	else
+		err=1
+	fi
+
+	ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x2  1>>/dev/null 2>>/dev/null
+	val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x80 2>>/dev/null)
+	if [ $? -eq 0 ];then
+		result4=$val
+	else
+		err=1
+	fi
+
+	ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x3  1>>/dev/null 2>>/dev/null
+	val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x80 2>>/dev/null)
+	if [ $? -eq 0 ];then
+		result5=$val
+	else
+		err=1
+	fi
+
+	ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x10  1>>/dev/null 2>>/dev/null
+	val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x80 2>>/dev/null)
+	if [ $? -eq 0 ];then
+		result6=$val
+	else
+		err=1
+	fi
+
+	ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x11  1>>/dev/null 2>>/dev/null
+	val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x80 0x80 2>>/dev/null)
+	if [ $? -eq 0 ];then
+		result7=$val
+	else
+		err=1
+	fi
+
+
+	ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 0x0  1>>/dev/null 2>>/dev/null
+
+	if [ $err -eq 0 ];then
+		return 1
+	else
+		return 0
+	fi
+}
+
+bmc_update_dynamic()
+{
+	local port=$1
+	i2cmux_dev=0
+	i2cmux_dev=`expr $port / 8`
+	i2cmux_dev=`expr $i2cmux_dev + 2`
+	ch=`expr $port % 8`
+
+	if [ ${port_sfp_type[$port]} -eq 17 ]; then
+		err=0
+		mux_addr=$(((0x70 + $i2cmux_dev - 2) * 2))
+		chan=$((1 << $ch))
+		ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 $chan  1>>/dev/null 2>>/dev/null
+
+		ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x0  1>>/dev/null 2>>/dev/null
+
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x1 0x3 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$(echo $val | awk '{printf $1}')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/rx_los"
+			result=$( printf "%d" 0x$result )
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x1 0x4 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$(echo $val | awk '{printf $1}')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/tx_fault"
+			result=$( printf "%d" 0x$result )
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x1 0x56 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$(echo $val | awk '{printf $1}')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/disable"
+			result=$( printf "%d" 0x$result )
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x24 0x16 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$val
+			result=$(echo $result | sed 's/[[:space:]]//g')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/qsfp_dom_bulk"
+			result=$(echo $result | sed -e 's/ //g')
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 0x0  1>>/dev/null 2>>/dev/null
+
+		if [ $err -eq 0 ];then
+			return 1
+		else
+			return 0
+		fi
+
+	elif [ ${port_sfp_type[$port]} -eq 24 ]; then
+		err=0
+		mux_addr=$(((0x70 + $i2cmux_dev - 2) * 2))
+		chan=$((1 << $ch))
+		ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 $chan  1>>/dev/null 2>>/dev/null
+
+		ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x0  1>>/dev/null 2>>/dev/null
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x2 0xe 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$val
+			result=$(echo $result | sed 's/[[:space:]]//g')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/tempe"
+			result=$(echo $result | sed -e 's/ //g')
+			echo $result > $result_path
+		else
+			err=1
+		fi
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x2 0x10 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$val
+			result=$(echo $result | sed 's/[[:space:]]//g')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/volte"
+			result=$(echo $result | sed -e 's/ //g')
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x10  1>>/dev/null 2>>/dev/null
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x1 0x82 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$(echo $val | awk '{printf $1}')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/disable"
+			result=$( printf "%d" 0x$result )
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		ipmitool raw 0x30 0x25 0x1 0xa0 0x0 0x7f 0x11  1>>/dev/null 2>>/dev/null
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x1 0x87 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$(echo $val | awk '{printf $1}')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/tx_fault"
+			result=$( printf "%d" 0x$result )
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x1 0x93 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$(echo $val | awk '{printf $1}')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/rx_los"
+			result=$( printf "%d" 0x$result )
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		val=$(ipmitool raw 0x30 0x25 0x1 0xa0 0x30 0x9a 2>>/dev/null)
+		if [ $? -eq 0 ];then
+			result=$val
+			result=$(echo $result | sed 's/[[:space:]]//g')
+			result_path="/sys/bus/i2c/devices/0-00"${port_map[$((port + 1))]}"/qsfp_dd_chan_mon"
+			result=$(echo $result | sed -e 's/ //g')
+			echo $result > $result_path
+		else
+			err=1
+		fi
+
+		ipmitool raw 0x30 0x25 0x1 $mux_addr 0x0 0x0  1>>/dev/null 2>>/dev/null
+
+		if [ $err -eq 0 ];then
+			return 1
+		else
+			return 0
+		fi
+	fi
+}
+
+#$1=port_no
+bmc_qsfp_eeprom_read()
+{
+	local port=$1
+	local eeprom_part1
+	local eeprom_part2
+	local eeprom_part3
+	local eeprom_part4
+	local eeprom_part5
+	local eeprom_part6
+	local eeprom_part7
+	local eeprom1_full
+	local eeprom2_full
+	local eeprom3_full
+
+	port=`expr $port - 1`
+	i2cmux_dev=0
+	i2cmux_dev=`expr $port / 8`
+	i2cmux_dev=`expr $i2cmux_dev + 2`
+	ch=`expr $port % 8`
+	if [ ${port_init[$port]} -eq 0 ]; then
+		if [ $board_ver == 1 ]; then
+			bmc_write $i2cmux_dev $ch 0x50 0x7f 0x00
+			bmc_read $i2cmux_dev $ch 0x50 0 128
+			if [ $? -eq 1 ];then
+				eeprom_part1=$result
+			else
+				return 1
+			fi
+
+			bmc_read $i2cmux_dev $ch 0x50 128 128
+			if [ $? -eq 1 ];then
+				eeprom_part2=$result
+			else
+				return 1
+			fi
+
+			#QSFP-DD page1
+			bmc_write $i2cmux_dev $ch 0x50 0x7f 0x01
+			bmc_read $i2cmux_dev $ch 0x50 128 128
+			if [ $? -eq 1 ];then
+				eeprom_part3=$result
+			else
+				return 1
+			fi
+
+			#QSFP-DD page2
+			bmc_write $i2cmux_dev $ch 0x50 0x7f 0x2
+			bmc_read $i2cmux_dev $ch 0x50 128 128
+			if [ $? -eq 1 ];then
+				eeprom_part4=$result
+			else
+				return 1
+			fi
+
+			#QSFP-DD page3
+			bmc_write $i2cmux_dev $ch 0x50 0x7f 0x3
+			bmc_read $i2cmux_dev $ch 0x50 128 128
+			if [ $? -eq 1 ];then
+				eeprom_part5=$result
+			else
+				return 1
+			fi
+
+			#QSFP-DD page10
+			bmc_write $i2cmux_dev $ch 0x50 0x7f 0x10
+			bmc_read $i2cmux_dev $ch 0x50 128 128
+			if [ $? -eq 1 ];then
+				eeprom_part6=$result
+			else
+				return 1
+			fi
+
+			#QSFP-DD page11
+			bmc_write $i2cmux_dev $ch 0x50 0x7f 0x11
+			bmc_read $i2cmux_dev $ch 0x50 128 128
+			if [ $? -eq 1 ];then
+				eeprom_part7=$result
+			else
+				return 1
+			fi
+		else
+			#pmon_status_check
+			#if [ $? -eq 1 ]; then
+			#	while [ $(docker exec pmon bash -c 'if [ -e /tmp/pause_eeprom_polling ]; then echo 1; else echo 0; fi') == '1' ]; do
+			#		sleep 0.1;
+			#	done
+			#fi
+
+			bmc_dump $i2cmux_dev $ch
+			if [ $? -eq 1 ];then
+				eeprom_part1=$result1
+				eeprom_part2=$result2
+				eeprom_part3=$result3
+				eeprom_part4=$result4
+				eeprom_part5=$result5
+				eeprom_part6=$result6
+				eeprom_part7=$result7
+			else
+				return 1
+			fi
+		fi
+	fi
+
+	if [ ${port_init[$port]} -eq 1 ]; then
+
+		eeprom1_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/eeprom1"
+		check=$(od -An -tx1 -w1 -v $eeprom1_path | head -n 1)
+		if [ $check != '00' ] && [ $check != 'ff' ] ; then
+			if [ -e /tmp/plugin_module_event ]; then
+				return
+			fi
+
+			bmc_update_dynamic $port
+			if [ $? -eq 0 ];then
+				return 1
+			fi
+		else
+			port_init[$port]=0
+		fi
+	fi
+
+
+	if [ ${port_init[$port]} -eq 0 ]; then
+		sfp_type=$(echo $eeprom_part1 | awk '{printf $1}')
+		byte_hex_test $sfp_type
+		if [ $? -eq 0 ]; then
+			return
+		fi
+		sfp_type=$( printf "%d" 0x$sfp_type )
+		port_sfp_type[$((i - 1))]=$sfp_type
+		#get temperature
+		if [ $sfp_type -eq 24 ];then
+			temp=$(echo $eeprom_part1 | awk '{printf $15}')
+			if [ $temp != "" ];then
+				temp=$( printf "%d" 0x$temp )
+				temp_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/temp"
+				echo $temp > $temp_path
+			fi
+		elif [ $sfp_type -eq 17 ];then
+			temp=$(echo $eeprom_part1 | awk '{printf $23}')
+			if [ $temp != "" ];then
+				temp=$( printf "%d" 0x$temp )
+				temp_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/temp"
+				echo $temp > $temp_path
+			fi
+		fi
+
+		#get lp_mode
+		lpmod_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/lp_mode"
+		if [ $sfp_type -eq 24 ];then
+			lpmod=$(echo $eeprom_part1 | awk '{printf $27}')
+			if [ $lpmod != "" ];then
+				state=$((lpmod&0x10))
+				if [ $state -eq 16 ];then
+					echo 1 > $lpmod_path
+				else
+					echo 0 > $lpmod_path
+				fi
+			fi
+		elif [ $sfp_type -eq 17 ];then
+			lpmod=$(echo $eeprom_part1 | awk '{printf $93}')
+			if [ $lpmod != "" ];then
+				state=$((lpmod&0x02))
+				if [ $state -eq 2 ];then
+					echo 1 > $lpmod_path
+				else
+					echo 0 > $lpmod_path
+				fi
+			fi
+		else
+			lpmod=""
+		fi
+
+		eeprom1_full=$eeprom_part1$eeprom_part2
+		eeprom1_full=$(echo $eeprom1_full | sed 's/[[:space:]]//g')
+		eeprom2_full=$eeprom_part3$eeprom_part4
+		eeprom2_full=$(echo $eeprom2_full | sed 's/[[:space:]]//g')
+		eeprom3_full=$eeprom_part5$eeprom_part6$eeprom_part7
+		eeprom3_full=$(echo $eeprom3_full | sed 's/[[:space:]]//g')
+
+		if [ $debug_flag -eq 0 ];then
+			eeprom1_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/eeprom1"
+			eeprom1_full=$(echo $eeprom1_full | sed -e 's/ //g')
+			echo $eeprom1_full > $eeprom1_path
+			eeprom2_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/eeprom2"
+			eeprom2_full=$(echo $eeprom2_full | sed -e 's/ //g')
+			echo $eeprom2_full > $eeprom2_path
+			eeprom3_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/eeprom3"
+			eeprom3_full=$(echo $eeprom3_full | sed -e 's/ //g')
+			echo $eeprom3_full > $eeprom3_path
+		else
+			printf "\nPort %d EEPROM:" $1
+			printf "\n-----------------------------------------------\n"
+			for i in $(seq 1 256);
+			do
+				printf "%s " ${eeprom1_full:0:2}
+				eeprom1_full=$(echo $eeprom1_full | sed 's/^..//')
+
+				val=`expr $i % 16`
+				if [ $val -eq 0 ];then
+					printf "\n"
+				fi
+			done
+			printf "\n-----------------------------------------------\n"
+		fi
+
+		if [ $board_ver == 0 ]; then
+			port_init[$port]=1
+			if [ $port -lt 16 ];then
+				cpld_path="/sys/bus/i2c/devices/0-0006/"
+			else
+				cpld_path="/sys/bus/i2c/devices/0-0007/"
+			fi
+			echo 1 > $cpld_path"port"$((port + 1))"_data_rdy"
+		fi
+	fi
+
+	return 0
+}
+
+TRANSCEIVER_DATA_READ()
+{
+	first_detect=0
+	loop_after_plugin=0
+
+	while true
+	do
+		if [ -e /sys/bus/i2c/devices/0-0006/port1_present ] && [ -e /sys/bus/i2c/devices/0-0007/port32_present ] && [ -e /sys/bus/i2c/devices/0-002f/eeprom1 ];then
+			if [ $first_detect == 0 ]; then
+				ipmitool raw 0x30 0x25 0x1 0xe0 0x0 0x0  1>>/dev/null 2>>/dev/null
+				ipmitool raw 0x30 0x25 0x1 0xe2 0x0 0x0  1>>/dev/null 2>>/dev/null
+				ipmitool raw 0x30 0x25 0x1 0xe4 0x0 0x0  1>>/dev/null 2>>/dev/null
+				ipmitool raw 0x30 0x25 0x1 0xe6 0x0 0x0  1>>/dev/null 2>>/dev/null
+			fi
+			for i in $(seq 1 32);
+			do
+				if [ $i -le 16 ];then
+					cpld_path="/sys/bus/i2c/devices/0-0006/"
+				else
+					cpld_path="/sys/bus/i2c/devices/0-0007/"
+				fi
+
+				pre=$(cat $cpld_path"port"$i"_present")
+				if [ $pre == 1 ]; then
+					bmc_qsfp_eeprom_read $i
+					if [ $first_detect == 0 ]; then
+						first_detect=1
+					fi
+				else
+					port_init[$((i - 1))]=0
+					port_sfp_type[$((i - 1))]=0
+				fi
+			done
+
+			if [ $first_detect == 1 ]; then
+				touch /tmp/eeprom_init_done
+			fi
+
+			if [ -e /tmp/plugin_module_event ]; then
+				loop_after_plugin=$((loop_after_plugin + 1))
+
+				if [ $loop_after_plugin -gt 2 ]; then
+					rm /tmp/plugin_module_event
+					loop_after_plugin=0
+				fi
+			fi
+
+			pmon_status_check
+			if [ $? -eq 1 ]; then
+				if [ $first_detect == 1 ]; then
+					docker exec pmon bash -c 'echo "" > /tmp/eeprom_init_done'
+				fi
+			else
+				first_detect=0
+			fi
+
+			sleep 1;
+		fi
+	done
+}
+
+TRANSCEIVER_DATA_READ
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-qsfp-monitor b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-qsfp-monitor
old mode 100644
new mode 100755
index 645b8528851f..f2eb928346d7
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-qsfp-monitor
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-qsfp-monitor
@@ -1,7 +1,7 @@
 #!/bin/bash
 
-debug_flag=0
-port_map=('00' '10' '11' '12' '13' '14' '15' '16' '17' '18' '19' '1a' '1b' '1c' '1d' '1e' '1f' '20' '21' '22' '23' '24' '25' '26' '27' '28' '29' '2a' '2b' '2c' '2d' '2e' '2f')
+board_ver=$(ipmitool raw 0x30 0x25 0x1 0xe0 0x1 0x0 1>/dev/null 2>/dev/null; echo $?) #error will get 1 means EVT, otherwise DVT
+
 port_1_8_presence=0
 port_9_16_presence=0
 port_17_24_presence=0
@@ -10,6 +10,14 @@ port_1_8_reset=0
 port_9_16_reset=0
 port_17_24_reset=0
 port_25_32_reset=0
+port_1_8_lpmode=0
+port_9_16_lpmode=0
+port_17_24_lpmode=0
+port_25_32_lpmode=0
+port_1_8_modsel=0
+port_9_16_modsel=0
+port_17_24_modsel=0
+port_25_32_modsel=0
 
 result=0
 pre_port_1_8_reset=256
@@ -25,6 +33,8 @@ pre_port_9_16_modsel=256
 pre_port_17_24_modsel=256
 pre_port_25_32_modsel=256
 
+port_pre_present=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0)
+
 byte_hex_test()
 {
 	if ! [[ $1  =~ ^[0-9A-Fa-f]{2}$ ]] ; then
@@ -34,405 +44,517 @@ byte_hex_test()
 	fi
 }
 
-#$1=mux $2=channel $3=dev_addr, $4=reg, $5=val
-bmc_write()
-{
-	addr_8b=$(echo $(($3)) | awk '{printf $1}')
-	addr_8b=`expr $addr_8b \\* 2`
-	ipmitool raw 0x30 0x85 $1 $2 $addr_8b 2 $4 $5 1>>/dev/null 2>>/dev/null
-	sleep 1
-	ipmitool raw 0x30 0x87 1>>/dev/null 2>>/dev/null
-}
-
-#$1=mux $2=channel $3=dev_addr, $4=reg, $5=len
-bmc_read()
+bmc_read_low_speed_signal_status()
 {
-	addr_8b=$(echo $(($3)) | awk '{printf $1}')
-	addr_8b=`expr $addr_8b \\* 2`
-	ipmitool raw 0x30 0x86 $1 $2 $addr_8b $5 $4 1>>/dev/null 2>>/dev/null
-	sleep 1
-	val=$(ipmitool raw 0x30 0x87 2>>/dev/null)
-	if [ $? -eq 0 ];then
-		result=$val
-		return 1
-	else
+	val=$(ipmitool raw 0x30 0x8d 2>/dev/null);
+	if [ $? -ne 0 ];then
 		return 0
 	fi
-}
 
-bmc_qsfp_lpmode_write()
-{
+	port_1_8_presence=$(echo $val | awk '{printf $1}')
+	byte_hex_test $port_1_8_presence
+	if [ $? -eq 0 ]; then
+		return 0
+	fi
+	port_1_8_presence=$( printf "%d" 0x$port_1_8_presence )
 
-	cpld_path="/sys/bus/i2c/devices/0-0006/"
-	val=0
-	for i in $(seq 1 8);
-	do
-		lpmode_path=$cpld_path"port"$i"_lpmode"
-		lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
-		val=$((val | (lpmode_input << ($i - 1))))
-	done
-	if [ $val -ne $pre_port_1_8_lpmode ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x50 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_1_8_lpmode=$val
+	port_9_16_presence=$(echo $val | awk '{printf $2}')
+	byte_hex_test $port_9_16_presence
+	if [ $? -eq 0 ]; then
+		return 0
 	fi
-	val=0
-	for i in $(seq 9 16);
-	do
-		lpmode_path=$cpld_path"port"$i"_lpmode"
-		lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
-		val=$((val | (lpmode_input << ($i - 9))))
-	done
+	port_9_16_presence=$( printf "%d" 0x$port_9_16_presence )
 
-	if [ $val -ne $pre_port_9_16_lpmode ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x51 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_9_16_lpmode=$val
+	port_17_24_presence=$(echo $val | awk '{printf $9}')
+	byte_hex_test $port_17_24_presence
+	if [ $? -eq 0 ]; then
+		return 0
 	fi
+	port_17_24_presence=$( printf "%d" 0x$port_17_24_presence )
 
-	cpld_path="/sys/bus/i2c/devices/0-0007/"
-	val=0
-	for i in $(seq 17 24);
-	do
-		lpmode_path=$cpld_path"port"$i"_lpmode"
-		lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
-		val=$((val | (lpmode_input << ($i - 17))))
-	done
+	port_25_32_presence=$(echo $val | awk '{printf $10}')
+	byte_hex_test $port_25_32_presence
+	if [ $? -eq 0 ]; then
+		return 0
+	fi
+	port_25_32_presence=$( printf "%d" 0x$port_25_32_presence )
 
-	if [ $val -ne $pre_port_17_24_lpmode ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x50 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_17_24_lpmode=$val
+	port_1_8_reset=$(echo $val | awk '{printf $3}')
+	byte_hex_test $port_1_8_reset
+	if [ $? -eq 0 ]; then
+		return 0
 	fi
-	val=0
-	for i in $(seq 25 32);
-	do
-		lpmode_path=$cpld_path"port"$i"_lpmode"
-		lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
-		val=$((val | (lpmode_input << ($i - 25))))
-	done
+	port_1_8_reset=$( printf "%d" 0x$port_1_8_reset )
 
-	if [ $val -ne $pre_port_25_32_lpmode ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x51 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_25_32_lpmode=$val
+	port_9_16_reset=$(echo $val | awk '{printf $4}')
+	byte_hex_test $port_9_16_reset
+	if [ $? -eq 0 ]; then
+		return 0
 	fi
+	port_9_16_reset=$( printf "%d" 0x$port_9_16_reset )
 
+	port_17_24_reset=$(echo $val | awk '{printf $11}')
+	byte_hex_test $port_17_24_reset
+	if [ $? -eq 0 ]; then
+		return 0
+	fi
+	port_17_24_reset=$( printf "%d" 0x$port_17_24_reset )
 
-	return 0
-}
+	port_25_32_reset=$(echo $val | awk '{printf $12}')
+	byte_hex_test $port_25_32_reset
+	if [ $? -eq 0 ]; then
+		return 0
+	fi
+	port_25_32_reset=$( printf "%d" 0x$port_25_32_reset )
 
-bmc_qsfp_modsel_write()
-{
+	port_1_8_lpmode=$(echo $val | awk '{printf $5}')
+	byte_hex_test $port_1_8_lpmode
+	if [ $? -eq 0 ]; then
+		return 0
+	fi
+	port_1_8_lpmode=$( printf "%d" 0x$port_1_8_lpmode )
 
-	cpld_path="/sys/bus/i2c/devices/0-0006/"
-	val=0
-	for i in $(seq 1 8);
-	do
-		modsel_path=$cpld_path"port"$i"_modsel"
-		modsel_input=$(cat $modsel_path | awk '{printf $1}')
-		val=$((val | (modsel_input << ($i - 1))))
-	done
+	port_9_16_lpmode=$(echo $val | awk '{printf $6}')
+	byte_hex_test $port_9_16_lpmode
+	if [ $? -eq 0 ]; then
+		return 0
+	fi
+	port_9_16_lpmode=$( printf "%d" 0x$port_9_16_lpmode )
 
-	val=$((0xff - val))
-	if [ $val -ne $pre_port_1_8_modsel ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x60 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_1_8_modsel=$val
+	port_17_24_lpmode=$(echo $val | awk '{printf $13}')
+	byte_hex_test $port_17_24_lpmode
+	if [ $? -eq 0 ]; then
+		return 0
 	fi
-	val=0
-	for i in $(seq 9 16);
-	do
-		modsel_path=$cpld_path"port"$i"_modsel"
-		modsel_input=$(cat $modsel_path | awk '{printf $1}')
-		val=$((val | (modsel_input << ($i - 9))))
-	done
+	port_17_24_lpmode=$( printf "%d" 0x$port_17_24_lpmode )
 
-	val=$((0xff - val))
-	if [ $val -ne $pre_port_9_16_modsel ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x61 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_9_16_modsel=$val
+	port_25_32_lpmode=$(echo $val | awk '{printf $14}')
+	byte_hex_test $port_25_32_lpmode
+	if [ $? -eq 0 ]; then
+		return 0
 	fi
+	port_25_32_lpmode=$( printf "%d" 0x$port_25_32_lpmode )
 
-	cpld_path="/sys/bus/i2c/devices/0-0007/"
-	val=0
-	for i in $(seq 17 24);
-	do
-		modsel_path=$cpld_path"port"$i"_modsel"
-		modsel_input=$(cat $modsel_path | awk '{printf $1}')
-		val=$((val | (modsel_input << ($i - 17))))
-	done
+	port_1_8_modsel=$(echo $val | awk '{printf $7}')
+	byte_hex_test $port_1_8_modsel
+	if [ $? -eq 0 ]; then
+		return 0
+	fi
+	port_1_8_modsel=$( printf "%d" 0x$port_1_8_modsel )
 
-	val=$((0xff - val))
-	if [ $val -ne $pre_port_17_24_modsel ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x60 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_17_24_modsel=$val
+	port_9_16_modsel=$(echo $val | awk '{printf $8}')
+	byte_hex_test $port_9_16_modsel
+	if [ $? -eq 0 ]; then
+		return 0
 	fi
-	val=0
-	for i in $(seq 25 32);
-	do
-		modsel_path=$cpld_path"port"$i"_modsel"
-		modsel_input=$(cat $modsel_path | awk '{printf $1}')
-		val=$((val | (modsel_input << ($i - 25))))
-	done
+	port_9_16_modsel=$( printf "%d" 0x$port_9_16_modsel )
 
-	val=$((0xff - val))
-	if [ $val -ne $pre_port_25_32_modsel ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x61 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_25_32_modsel=$val
+	port_17_24_modsel=$(echo $val | awk '{printf $15}')
+	byte_hex_test $port_17_24_modsel
+	if [ $? -eq 0 ]; then
+		return 0
 	fi
+	port_17_24_modsel=$( printf "%d" 0x$port_17_24_modsel )
 
+	port_25_32_modsel=$(echo $val | awk '{printf $16}')
+	byte_hex_test $port_25_32_modsel
+	if [ $? -eq 0 ]; then
+		return 0
+	fi
+	port_25_32_modsel=$( printf "%d" 0x$port_25_32_modsel )
 
-	return 0
+	return 1
 }
 
-bmc_qsfp_presence_read()
+bmc_qsfp_lpmode_write()
 {
-	a=0
-	tmp1=$(ipmitool raw 0x30 0x25 0x00 0x0c 0x1 0x30 2>>/dev/null)
-	a=$((a+$?))
-	tmp1=$(echo $tmp1 | awk '{printf $1}')
-	sleep 0.05
-	tmp2=$(ipmitool raw 0x30 0x25 0x00 0x0c 0x1 0x31 2>>/dev/null)
-	a=$((a+$?))
-	tmp2=$(echo $tmp2 | awk '{printf $1}')
-	sleep 0.05
-	tmp3=$(ipmitool raw 0x30 0x25 0x00 0x0e 0x1 0x30 2>>/dev/null)
-	a=$((a+$?))
-	tmp3=$(echo $tmp3 | awk '{printf $1}')
-	sleep 0.05
-	tmp4=$(ipmitool raw 0x30 0x25 0x00 0x0e 0x1 0x31 2>>/dev/null)
-	a=$((a+$?))
-	tmp4=$(echo $tmp4 | awk '{printf $1}')
-	sleep 0.05
-	if [ $a -eq 0 ];then
-		byte_hex_test $tmp1
-		if [ $? -eq 0 ]; then
-			return 0
+
+	if [ $board_ver == 1 ]; then
+		cpld_path="/sys/bus/i2c/devices/0-0006/"
+		val=0
+		for i in $(seq 1 8);
+		do
+			lpmode_path=$cpld_path"port"$i"_lpmode"
+			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
+			val=$((val | (lpmode_input << ($i - 1))))
+		done
+		if [ $val -ne $pre_port_1_8_lpmode ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x50 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_1_8_lpmode=$val
 		fi
-		port_1_8_presence=$( printf "%d" 0x$tmp1 )
-		byte_hex_test $tmp2
-		if [ $? -eq 0 ]; then
-			return 0
+		val=0
+		for i in $(seq 9 16);
+		do
+			lpmode_path=$cpld_path"port"$i"_lpmode"
+			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
+			val=$((val | (lpmode_input << ($i - 9))))
+		done
+
+		if [ $val -ne $pre_port_9_16_lpmode ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x51 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_9_16_lpmode=$val
 		fi
-		port_9_16_presence=$( printf "%d" 0x$tmp2 )
-		byte_hex_test $tmp3
-		if [ $? -eq 0 ]; then
-			return 0
+
+		cpld_path="/sys/bus/i2c/devices/0-0007/"
+		val=0
+		for i in $(seq 17 24);
+		do
+			lpmode_path=$cpld_path"port"$i"_lpmode"
+			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
+			val=$((val | (lpmode_input << ($i - 17))))
+		done
+
+		if [ $val -ne $pre_port_17_24_lpmode ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x50 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_17_24_lpmode=$val
 		fi
-		port_17_24_presence=$( printf "%d" 0x$tmp3 )
-		byte_hex_test $tmp4
-		if [ $? -eq 0 ]; then
-			return 0
+		val=0
+		for i in $(seq 25 32);
+		do
+			lpmode_path=$cpld_path"port"$i"_lpmode"
+			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
+			val=$((val | (lpmode_input << ($i - 25))))
+		done
+
+		if [ $val -ne $pre_port_25_32_lpmode ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x51 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_25_32_lpmode=$val
 		fi
-		port_25_32_presence=$( printf "%d" 0x$tmp4 )
-		return 1
+
+	else
+		cpld_path="/sys/bus/i2c/devices/0-0006/"
+		val=0
+		for i in $(seq 1 8);
+		do
+			lpmode_path=$cpld_path"port"$i"_lpmode"
+			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
+			val=$((val | (lpmode_input << ($i - 1))))
+		done
+		val2=0
+		for i in $(seq 9 16);
+		do
+			lpmode_path=$cpld_path"port"$i"_lpmode"
+			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
+			val2=$((val2 | (lpmode_input << ($i - 9))))
+		done
+
+		if [ $val -ne $port_1_8_lpmode ] || [ $val2 -ne $port_9_16_lpmode ]; then
+			ipmitool raw 0x30 0x8c 0x0 0x1 $val $val2 1>>/dev/null 2>>/dev/null
+		fi
+
+		cpld_path="/sys/bus/i2c/devices/0-0007/"
+		val=0
+		for i in $(seq 17 24);
+		do
+			lpmode_path=$cpld_path"port"$i"_lpmode"
+			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
+			val=$((val | (lpmode_input << ($i - 17))))
+		done
+
+		val2=0
+		for i in $(seq 25 32);
+		do
+			lpmode_path=$cpld_path"port"$i"_lpmode"
+			lpmode_input=$(cat $lpmode_path | awk '{printf $1}')
+			val2=$((val2 | (lpmode_input << ($i - 25))))
+		done
+
+		if [ $val -ne $port_17_24_lpmode ] || [ $val2 -ne $port_25_32_lpmode ]; then
+			ipmitool raw 0x30 0x8c 0x1 0x1 $val $val2 1>>/dev/null 2>>/dev/null
+		fi
+
 	fi
 
 	return 0
 }
 
-bmc_qsfp_reset_write()
+bmc_qsfp_modsel_write()
 {
 
-	cpld_path="/sys/bus/i2c/devices/0-0006/"
-	val=0
-	for i in $(seq 1 8);
-	do
-		reset_path=$cpld_path"port"$i"_reset"
-		reset_input=$(cat $reset_path | awk '{printf $1}')
-		val=$((val | (reset_input << ($i - 1))))
-	done
+	if [ $board_ver == 1 ]; then
+		cpld_path="/sys/bus/i2c/devices/0-0006/"
+		val=0
+		for i in $(seq 1 8);
+		do
+			modsel_path=$cpld_path"port"$i"_modsel"
+			modsel_input=$(cat $modsel_path | awk '{printf $1}')
+			val=$((val | (modsel_input << ($i - 1))))
+		done
 
-	val=$((0xff - val))
-	if [ $val -ne $pre_port_1_8_reset ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x20 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_1_8_reset=$val
-	fi
-	val=0
-	for i in $(seq 9 16);
-	do
-		reset_path=$cpld_path"port"$i"_reset"
-		reset_input=$(cat $reset_path | awk '{printf $1}')
-		val=$((val | (reset_input << ($i - 9))))
-	done
+		val=$((0xff - val))
+		if [ $val -ne $pre_port_1_8_modsel ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x60 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_1_8_modsel=$val
+		fi
+		val=0
+		for i in $(seq 9 16);
+		do
+			modsel_path=$cpld_path"port"$i"_modsel"
+			modsel_input=$(cat $modsel_path | awk '{printf $1}')
+			val=$((val | (modsel_input << ($i - 9))))
+		done
 
-	val=$((0xff - val))
-	if [ $val -ne $pre_port_9_16_reset ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x21 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_9_16_reset=$val
-	fi
+		val=$((0xff - val))
+		if [ $val -ne $pre_port_9_16_modsel ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x61 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_9_16_modsel=$val
+		fi
 
-	cpld_path="/sys/bus/i2c/devices/0-0007/"
-	val=0
-	for i in $(seq 17 24);
-	do
-		reset_path=$cpld_path"port"$i"_reset"
-		reset_input=$(cat $reset_path | awk '{printf $1}')
-		val=$((val | (reset_input << ($i - 17))))
-	done
+		cpld_path="/sys/bus/i2c/devices/0-0007/"
+		val=0
+		for i in $(seq 17 24);
+		do
+			modsel_path=$cpld_path"port"$i"_modsel"
+			modsel_input=$(cat $modsel_path | awk '{printf $1}')
+			val=$((val | (modsel_input << ($i - 17))))
+		done
 
-	val=$((0xff - val))
-	if [ $val -ne $pre_port_17_24_reset ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x20 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_17_24_reset=$val
-	fi
-	val=0
-	for i in $(seq 25 32);
-	do
-		reset_path=$cpld_path"port"$i"_reset"
-		reset_input=$(cat $reset_path | awk '{printf $1}')
-		val=$((val | (reset_input << ($i - 25))))
-	done
+		val=$((0xff - val))
+		if [ $val -ne $pre_port_17_24_modsel ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x60 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_17_24_modsel=$val
+		fi
+		val=0
+		for i in $(seq 25 32);
+		do
+			modsel_path=$cpld_path"port"$i"_modsel"
+			modsel_input=$(cat $modsel_path | awk '{printf $1}')
+			val=$((val | (modsel_input << ($i - 25))))
+		done
 
-	val=$((0xff - val))
-	if [ $val -ne $pre_port_25_32_reset ]; then
-		ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x21 $val 1>>/dev/null 2>>/dev/null
-		sleep 0.05
-		pre_port_25_32_reset=$val
-	fi
+		val=$((0xff - val))
+		if [ $val -ne $pre_port_25_32_modsel ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x61 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_25_32_modsel=$val
+		fi
+	else
+		cpld_path="/sys/bus/i2c/devices/0-0006/"
+		val=0
+		for i in $(seq 1 8);
+		do
+			modsel_path=$cpld_path"port"$i"_modsel"
+			modsel_input=$(cat $modsel_path | awk '{printf $1}')
+			val=$((val | (modsel_input << ($i - 1))))
+		done
 
+		val=$((0xff - val))
+
+		val2=0
+		for i in $(seq 9 16);
+		do
+			modsel_path=$cpld_path"port"$i"_modsel"
+			modsel_input=$(cat $modsel_path | awk '{printf $1}')
+			val2=$((val2 | (modsel_input << ($i - 9))))
+		done
+
+		val2=$((0xff - val2))
+		if [ $val -ne $port_1_8_modsel ] || [ $val2 -ne $port_9_16_modsel ]; then
+			ipmitool raw 0x30 0x8c 0x0 0x2 $val $val2 1>>/dev/null 2>>/dev/null
+		fi
+
+		cpld_path="/sys/bus/i2c/devices/0-0007/"
+		val=0
+		for i in $(seq 17 24);
+		do
+			modsel_path=$cpld_path"port"$i"_modsel"
+			modsel_input=$(cat $modsel_path | awk '{printf $1}')
+			val=$((val | (modsel_input << ($i - 17))))
+		done
+
+		val=$((0xff - val))
+
+		val2=0
+		for i in $(seq 25 32);
+		do
+			modsel_path=$cpld_path"port"$i"_modsel"
+			modsel_input=$(cat $modsel_path | awk '{printf $1}')
+			val2=$((val2 | (modsel_input << ($i - 25))))
+		done
+
+		val2=$((0xff - val2))
+		if [ $val -ne $port_17_24_modsel ] || [ $val2 -ne $port_25_32_modsel ]; then
+			ipmitool raw 0x30 0x8c 0x1 0x2 $val $val2 1>>/dev/null 2>>/dev/null
+		fi
+	fi
 
 	return 0
 }
 
-#$1=port_no
-bmc_qsfp_eeprom_read()
+bmc_qsfp_presence_read()
 {
-	local port=$1
-	local eeprom_part1
-	local eeprom_part2
-	local eeprom_part3
-	local eeprom_part4
-	local eeprom1_full
-	local eeprom2_full
-
-	port=`expr $port - 1`
-	i2cmux_dev=0
-	i2cmux_dev=`expr $port / 8`
-	i2cmux_dev=`expr $i2cmux_dev + 2`
-	ch=`expr $port % 8`
-
-	bmc_write $i2cmux_dev $ch 0x50 0x7f 0x00
-	bmc_read $i2cmux_dev $ch 0x50 0 128
-	if [ $? -eq 1 ];then
-		eeprom_part1=$result
-	else
-		return 1
-	fi
+	if [ $board_ver == 1 ]; then
+		a=0
+		tmp1=$(ipmitool raw 0x30 0x25 0x00 0x0c 0x1 0x30 2>>/dev/null)
+		a=$((a+$?))
+		tmp1=$(echo $tmp1 | awk '{printf $1}')
+		sleep 0.05
+		tmp2=$(ipmitool raw 0x30 0x25 0x00 0x0c 0x1 0x31 2>>/dev/null)
+		a=$((a+$?))
+		tmp2=$(echo $tmp2 | awk '{printf $1}')
+		sleep 0.05
+		tmp3=$(ipmitool raw 0x30 0x25 0x00 0x0e 0x1 0x30 2>>/dev/null)
+		a=$((a+$?))
+		tmp3=$(echo $tmp3 | awk '{printf $1}')
+		sleep 0.05
+		tmp4=$(ipmitool raw 0x30 0x25 0x00 0x0e 0x1 0x31 2>>/dev/null)
+		a=$((a+$?))
+		tmp4=$(echo $tmp4 | awk '{printf $1}')
+		sleep 0.05
+		if [ $a -eq 0 ];then
+			byte_hex_test $tmp1
+			if [ $? -eq 0 ]; then
+				return 0
+			fi
+			port_1_8_presence=$( printf "%d" 0x$tmp1 )
+			byte_hex_test $tmp2
+			if [ $? -eq 0 ]; then
+				return 0
+			fi
+			port_9_16_presence=$( printf "%d" 0x$tmp2 )
+			byte_hex_test $tmp3
+			if [ $? -eq 0 ]; then
+				return 0
+			fi
+			port_17_24_presence=$( printf "%d" 0x$tmp3 )
+			byte_hex_test $tmp4
+			if [ $? -eq 0 ]; then
+				return 0
+			fi
+			port_25_32_presence=$( printf "%d" 0x$tmp4 )
+			return 1
+		fi
 
-	bmc_read $i2cmux_dev $ch 0x50 128 128
-	if [ $? -eq 1 ];then
-		eeprom_part2=$result
+		return 0
 	else
-		return 1
+		bmc_read_low_speed_signal_status
+		if [ $? -eq 0 ]; then
+			return 0
+		fi
 	fi
+}
 
-	#QSFP-DD page2
-	bmc_write $i2cmux_dev $ch 0x50 0x7f 0x02
-	bmc_read $i2cmux_dev $ch 0x50 128 128
-	if [ $? -eq 1 ];then
-		eeprom_part3=$result
-	else
-		return 1
-	fi
+bmc_qsfp_reset_write()
+{
 
-	#QSFP-DD page11
-	bmc_write $i2cmux_dev $ch 0x50 0x7f 0x11
-	bmc_read $i2cmux_dev $ch 0x50 128 128
-	if [ $? -eq 1 ];then
-		eeprom_part4=$result
-	else
-		return 1
-	fi
+	if [ $board_ver == 1 ]; then
+		cpld_path="/sys/bus/i2c/devices/0-0006/"
+		val=0
+		for i in $(seq 1 8);
+		do
+			reset_path=$cpld_path"port"$i"_reset"
+			reset_input=$(cat $reset_path | awk '{printf $1}')
+			val=$((val | (reset_input << ($i - 1))))
+		done
 
-	sfp_type=$(echo $eeprom_part1 | awk '{printf $1}')
-	byte_hex_test $sfp_type
-	if [ $? -eq 0 ]; then
-		return
-	fi
-	sfp_type=$( printf "%d" 0x$sfp_type )
-
-	#get temperature
-	temp=$(echo $eeprom_part1 | awk '{printf $15}')
-	if [ $temp != "" ];then
-		temp=$( printf "%d" 0x$temp )
-		temp_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/temp"
-		echo $temp > $temp_path
-	fi
+		val=$((0xff - val))
+		if [ $val -ne $pre_port_1_8_reset ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x20 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_1_8_reset=$val
+		fi
+		val=0
+		for i in $(seq 9 16);
+		do
+			reset_path=$cpld_path"port"$i"_reset"
+			reset_input=$(cat $reset_path | awk '{printf $1}')
+			val=$((val | (reset_input << ($i - 9))))
+		done
 
-	#get lp_mode
-	lpmod_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/lp_mode"
-	if [ $sfp_type -eq 24 ];then
-		lpmod=$(echo $eeprom_part1 | awk '{printf $27}')
-		if [ $lpmod != "" ];then
-			state=$((lpmod&0x10))
-			if [ $state -eq 16 ];then
-				echo 1 > $lpmod_path
-			else
-				echo 0 > $lpmod_path
-			fi
+		val=$((0xff - val))
+		if [ $val -ne $pre_port_9_16_reset ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0c 0x0 0x21 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_9_16_reset=$val
 		fi
-	elif [ $sfp_type -eq 17 ];then
-		lpmod=$(echo $eeprom_part1 | awk '{printf $93}')
-		if [ $lpmod != "" ];then
-			state=$((lpmod&0x02))
-			if [ $state -eq 2 ];then
-				echo 1 > $lpmod_path
-			else
-				echo 0 > $lpmod_path
-			fi
+
+		cpld_path="/sys/bus/i2c/devices/0-0007/"
+		val=0
+		for i in $(seq 17 24);
+		do
+			reset_path=$cpld_path"port"$i"_reset"
+			reset_input=$(cat $reset_path | awk '{printf $1}')
+			val=$((val | (reset_input << ($i - 17))))
+		done
+
+		val=$((0xff - val))
+		if [ $val -ne $pre_port_17_24_reset ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x20 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_17_24_reset=$val
 		fi
-	else
-		lpmod=""
-	fi
+		val=0
+		for i in $(seq 25 32);
+		do
+			reset_path=$cpld_path"port"$i"_reset"
+			reset_input=$(cat $reset_path | awk '{printf $1}')
+			val=$((val | (reset_input << ($i - 25))))
+		done
 
-	eeprom1_full=$eeprom_part1$eeprom_part2
-	eeprom1_full=$(echo $eeprom1_full | sed 's/[[:space:]]//g')
-	eeprom2_full=$eeprom_part3$eeprom_part4
-	eeprom2_full=$(echo $eeprom2_full | sed 's/[[:space:]]//g')
-
-	if [ $debug_flag -eq 0 ];then
-		eeprom1_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/eeprom1"
-		eeprom1_full=$(echo $eeprom1_full | sed -e 's/ //g')
-		echo $eeprom1_full > $eeprom1_path
-		eeprom2_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/eeprom2"
-		eeprom2_full=$(echo $eeprom2_full | sed -e 's/ //g')
-		echo $eeprom2_full > $eeprom2_path
+		val=$((0xff - val))
+		if [ $val -ne $pre_port_25_32_reset ]; then
+			ipmitool raw 0x30 0x25 0x00 0x0e 0x0 0x21 $val 1>>/dev/null 2>>/dev/null
+			sleep 0.05
+			pre_port_25_32_reset=$val
+		fi
 	else
-		printf "\nPort %d EEPROM:" $1
-		printf "-----------------------------------------------\n"
-		for i in $(seq 1 256);
+		cpld_path="/sys/bus/i2c/devices/0-0006/"
+		val=0
+		for i in $(seq 1 8);
 		do
-			printf "%s " ${eeprom1_full:0:2}
-			eeprom1_full=$(echo $eeprom1_full | sed 's/^..//')
+			reset_path=$cpld_path"port"$i"_reset"
+			reset_input=$(cat $reset_path | awk '{printf $1}')
+			val=$((val | (reset_input << ($i - 1))))
+		done
 
-			val=`expr $i % 16`
-			if [ $val -eq 0 ];then
-				printf "\n"
-			fi
+		val=$((0xff - val))
+		val2=0
+		for i in $(seq 9 16);
+		do
+			reset_path=$cpld_path"port"$i"_reset"
+			reset_input=$(cat $reset_path | awk '{printf $1}')
+			val2=$((val2 | (reset_input << ($i - 9))))
 		done
-		printf "\n-----------------------------------------------\n"
+
+		val2=$((0xff - val2))
+		if [ $val -ne $port_1_8_reset ] || [ $val2 -ne $port_9_16_reset ]; then
+			ipmitool raw 0x30 0x8c 0x0 0x0 $val $val2 1>>/dev/null 2>>/dev/null
+		fi
+
+		cpld_path="/sys/bus/i2c/devices/0-0007/"
+		val=0
+		for i in $(seq 17 24);
+		do
+			reset_path=$cpld_path"port"$i"_reset"
+			reset_input=$(cat $reset_path | awk '{printf $1}')
+			val=$((val | (reset_input << ($i - 17))))
+		done
+
+		val=$((0xff - val))
+		val2=0
+		for i in $(seq 25 32);
+		do
+			reset_path=$cpld_path"port"$i"_reset"
+			reset_input=$(cat $reset_path | awk '{printf $1}')
+			val2=$((val2 | (reset_input << ($i - 25))))
+		done
+
+		val2=$((0xff - val2))
+		if [ $val -ne $port_17_24_reset ] || [ $val2 -ne $port_25_32_reset ]; then
+			ipmitool raw 0x30 0x8c 0x1 0x0 $val $val2 1>>/dev/null 2>>/dev/null
+		fi
 	fi
 
 	return 0
 }
 
-#$1=port_no
-bmc_qsfp_eeprom_clear()
-{
-	eeprom1_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/eeprom1"
-	echo "" > $eeprom1_path
-	eeprom2_path="/sys/bus/i2c/devices/0-00"${port_map[$1]}"/eeprom2"
-	echo "" > $eeprom2_path
-}
-
 QSFP_monitor()
 {
 	while true
@@ -463,16 +585,24 @@ QSFP_monitor()
 
 				if [ $is_presence -eq 0 ];then
 					echo 1 > $cpld_path"port"$i"_present"
-					bmc_qsfp_eeprom_read $i
+					if [ $board_ver == 0 ]; then
+						if [ -e /tmp/eeprom_init_done ] && [ ${port_pre_present[$((i - 1))]} -eq 0 ]; then
+							touch /tmp/plugin_module_event
+						fi
+
+						port_pre_present[$((i - 1))]=1
+					fi
 				else
 					echo 0 > $cpld_path"port"$i"_present"
-					bmc_qsfp_eeprom_clear $i
+					echo 0 > $cpld_path"port"$i"_data_rdy"
+					if [ $board_ver == 0 ]; then
+						port_pre_present[$((i - 1))]=0
+					fi
 				fi
 			done
-			sleep 2
-		else
-			sleep 1
 		fi
+
+		sleep 0.2
 	done
 }
 
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-send-temp-to-bmc b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-send-temp-to-bmc
new file mode 100755
index 000000000000..4f2c1be21ab1
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/sonic-send-temp-to-bmc
@@ -0,0 +1,51 @@
+#!/bin/bash
+board_ver=$(ipmitool raw 0x30 0x25 0x1 0xe0 0x1 0x0 1>/dev/null 2>/dev/null; echo $?) #error will get 1 means EVT, otherwise DVT
+
+send_temp_to_bmc()
+{
+	c_path=$(ls /sys/devices/platform/coretemp.0/hwmon/)
+	c_temp=$(cat /sys/class/hwmon/$c_path/temp1_input)
+	cputemp=`expr $c_temp / 1000`
+
+	transceiver_temp=""
+	for i in $(seq 1 32);
+	do
+		index=$((i + 15));
+		path="/sys/bus/i2c/devices/0-00$(printf "%x" $index)/temp";
+		t_temp=$(cat $path)
+		transceiver_temp+="$transcevicer_temp $t_temp"
+	done
+
+	m2_temp=$(smartctl -A /dev/sda | egrep ^194 | awk '{print $10}')
+
+	d_dev=$(find /sys/devices/ -name 1-00\*)
+	d_path=$(ls $d_dev/hwmon/)
+	d_temp=$(cat /sys/class/hwmon/$d_path/temp1_input)
+	dimm_temp=`expr $d_temp / 1000`
+
+	ipmitool raw 0x30 0x8b $cputemp $transceiver_temp $m2_temp $dimm_temp
+}
+
+SEND_TEMP()
+{
+	boot_time_barrier=1
+	while true
+	do
+		if [ -e /sys/bus/i2c/devices/0-0006/port1_present ] && [ -e /sys/bus/i2c/devices/0-0007/port32_present ] && [ -e /sys/bus/i2c/devices/0-002f/eeprom1 ];then
+
+			if [ $board_ver == 0 ]; then
+				if [ $boot_time_barrier == 1 ]; then
+					if [ -e /tmp/eeprom_init_done ]; then
+						boot_time_barrier=0
+					fi
+				else
+					send_temp_to_bmc
+				fi
+			fi
+
+			sleep 1;
+		fi
+	done
+}
+
+SEND_TEMP
diff --git a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/wistron_6512_32r_util.py b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/wistron_6512_32r_util.py
old mode 100644
new mode 100755
index 030942825df0..31cf25f4cbe9
--- a/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/wistron_6512_32r_util.py
+++ b/platform/innovium/sonic-platform-modules-wistron/6512-32r/utils/wistron_6512_32r_util.py
@@ -68,8 +68,6 @@
 # PSU
 'echo wistron_psu1 0x5a > /sys/bus/i2c/devices/i2c-0/new_device',
 'echo wistron_psu2 0x59 > /sys/bus/i2c/devices/i2c-0/new_device',
-# EEPROM
-'echo wistron_syseeprom 0x55 > /sys/bus/i2c/devices/i2c-0/new_device',
 ]
 
 FORCE = 0
@@ -173,6 +171,7 @@ def driver_inserted():
 'modprobe ipmi_watchdog',
 'modprobe i2c_dev',
 'modprobe at24',
+'modprobe i2c-imc',
 'modprobe wistron_6512_32r_syseeprom',
 'modprobe wistron_6512_32r_cpld',
 'modprobe wistron_6512_32r_fan',
@@ -242,6 +241,20 @@ def device_install():
             if FORCE == 0:
                 return status
 
+
+    status, output = log_os_system("i2cget -y 0 0x55 0x0 1>/dev/null 2>/dev/null; echo $?", 1)
+    if status:
+        print(output)
+        if FORCE == 0:
+            return status
+    else:
+        if output == '0':
+            log_os_system("echo 24c02 0x55 > /sys/bus/i2c/devices/i2c-0/new_device", 1)
+        else:
+            log_os_system("echo wistron_syseeprom 0x55 > /sys/bus/i2c/devices/i2c-0/new_device", 1)
+
+
+
     for i in range(0,len(sfp_map)):
         status, output = log_os_system("echo wistron_oom 0x"+str(sfp_map[i])+ " > /sys/bus/i2c/devices/i2c-0/new_device", 1)
         if status:
@@ -324,12 +337,6 @@ def do_install():
     else:
         print(PROJECT_NAME.upper()+" devices detected....")
 
-    status, output = log_os_system(
-        "/bin/sh /usr/local/bin/platform_api_mgnt.sh init", 1)
-    if status:
-            print(output)
-            if FORCE == 0:
-                return status
     return
 
 def do_uninstall():
diff --git a/platform/innovium/sonic-platform-modules-wistron/debian/changelog b/platform/innovium/sonic-platform-modules-wistron/debian/changelog
new file mode 100644
index 000000000000..12d04e4d0303
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/debian/changelog
@@ -0,0 +1,5 @@
+sonic-wistron-platform-modules (1.1) unstable; urgency=low
+
+  * Initial release
+
+ -- Haowei Chung <haowei_chung@wistron.com>  Fri, 30 Aug 2019 14:48:00 +0800
diff --git a/platform/innovium/sonic-platform-modules-wistron/debian/compat b/platform/innovium/sonic-platform-modules-wistron/debian/compat
new file mode 100644
index 000000000000..b4de39476753
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/debian/compat
@@ -0,0 +1 @@
+11
diff --git a/platform/innovium/sonic-platform-modules-wistron/debian/control b/platform/innovium/sonic-platform-modules-wistron/debian/control
new file mode 100644
index 000000000000..00ad6637c378
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/debian/control
@@ -0,0 +1,14 @@
+Source: sonic-wistron-platform-modules
+Section: main
+Priority: extra
+Maintainer: Wistron <haowei_chung@wistron.com>
+Build-Depends: debhelper (>= 8.0.0), bzip2
+Standards-Version: 3.9.3
+
+Package: sonic-platform-wistron-sw-to3200k
+Architecture: amd64
+Description: kernel modules for platform devices such as fan, led, sfp
+
+Package: sonic-platform-wistron-6512-32r
+Architecture: amd64
+Description: kernel modules for platform devices such as fan, led, sfp
diff --git a/platform/innovium/sonic-platform-modules-wistron/debian/rules b/platform/innovium/sonic-platform-modules-wistron/debian/rules
new file mode 100755
index 000000000000..defb1f932d16
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/debian/rules
@@ -0,0 +1,143 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+include /usr/share/dpkg/pkg-info.mk
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+export INSTALL_MOD_DIR:=extra
+
+PYTHON         ?= python2
+PYTHON3         ?= python3
+
+PACKAGE_PRE_NAME := sonic-platform-wistron
+KVERSION   ?= $(shell uname -r)
+KERNEL_SRC :=  /lib/modules/$(KVERSION)
+MOD_SRC_DIR:= $(shell pwd)
+MODULE_DIRS := sw-to3200k 6512-32r
+MODULE_DIR := modules
+UTILS_DIR := utils
+SERVICE_DIR := service
+CONF_DIR := conf
+
+%:
+	dh $@ --with systemd,python2,python3 --buildsystem=pybuild
+
+clean:
+	dh_testdir
+	dh_testroot
+	dh_clean
+
+build:
+	#make modules -C $(KERNEL_SRC)/build M=$(MODULE_SRC)
+	(for mod in $(MODULE_DIRS); do \
+		make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \
+		#$(PYTHON) $${mod}/setup.py build; \
+		cd $(MOD_SRC_DIR)/$${mod}; \
+		if [ -f setup.py ]; then \
+			$(PYTHON3) setup.py bdist_wheel -d $(MOD_SRC_DIR)/$${mod}; \
+			echo "Finished making whl package for $$mod"; \
+		fi; \
+		cd $(MOD_SRC_DIR); \
+	done)
+
+binary: binary-arch binary-indep
+	# Nothing to do
+
+binary-arch:
+	# Nothing to do
+
+#install: build
+	#dh_testdir
+	#dh_testroot
+	#dh_clean -k
+	#dh_installdirs
+
+binary-indep:
+	dh_testdir
+	dh_installdirs
+
+	# Custom package commands
+	(for mod in $(MODULE_DIRS); do \
+		dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \
+		dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} usr/local/bin; \
+		dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} lib/systemd/system; \
+		cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \
+		#cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/* debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/local/bin/; \
+		cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system/; \
+		#$(PYTHON) $${mod}/setup.py install --root=$(MOD_SRC_DIR)/debian/$(PACKAGE_PRE_NAME)-$${mod} --install-layout=deb; \
+	done)
+	# Resuming debhelper scripts
+	dh_testroot
+	dh_install
+	dh_installchangelogs
+	dh_installdocs
+	dh_installsystemd
+	dh_installinit
+	dh_link
+	dh_fixperms
+	dh_compress
+	dh_strip
+	dh_installdeb
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+.PHONY: build binary binary-arch binary-indep clean
+
+##!/usr/bin/make -f
+#
+#export INSTALL_MOD_DIR:=extra
+#
+#PYTHON         ?= python2
+#PYTHON3         ?= python3
+#
+#KVERSION   ?= $(shell uname -r)
+#KERNEL_SRC :=  /lib/modules/$(KVERSION)
+#MOD_SRC_DIR:= $(shell pwd)
+#
+#PACKAGE_PRE_NAME := sonic-platform-wistron
+#MODULE_DIRS := 3306-32
+#MODULE_SRC  := modules
+##UTILITY_SRC := utils
+#SERVICE_SRC := service
+#COMMON_SRC  := common
+#%:
+#	dh $@
+#
+#
+#override_dh_auto_build:
+#	(for mod in $(MODULE_DIRS); do \
+#		make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \
+#		cd $(MOD_SRC_DIR)/$${mod}; \
+#		python2.7 setup.py bdist_wheel -d $(MOD_SRC_DIR)/$${mod}/modules; \
+#		cd $(MOD_SRC_DIR); \
+#	done)
+#
+#override_dh_auto_install:
+#	(for mod in $(MODULE_DIRS); do \
+#		dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} \
+#			$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \
+#		cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_SRC)/*.ko \
+#			debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \
+#		dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} usr/local/bin; \
+##		cp $(MOD_SRC_DIR)/$${mod}/$(UTILITY_SRC)/* \
+##			debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/local/bin; \
+#		dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} lib/systemd/system; \
+#		cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_SRC)/*.service \
+#			debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system; \
+#	done)
+#
+#override_dh_usrlocal:
+#
+#override_dh_clean:
+#	dh_clean
+#	$(RM) -r $(COMMON_SRC)/*.o $(COMMON_SRC)/.*.cmd
+#	(for mod in $(MODULE_DIRS); do \
+#		make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \
+#	done)
diff --git a/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-6512-32r.install b/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-6512-32r.install
new file mode 100644
index 000000000000..955583027537
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-6512-32r.install
@@ -0,0 +1,3 @@
+6512-32r/utils/* usr/local/bin
+6512-32r/sonic_platform-1.0-py3-none-any.whl usr/share/sonic/device/x86_64-wistron_6512_32r-r0
+6512-32r/service/*.service lib/systemd/system
diff --git a/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-6512-32r.postinst b/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-6512-32r.postinst
new file mode 100644
index 000000000000..b1cef228e7ee
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-6512-32r.postinst
@@ -0,0 +1,41 @@
+#!/bin/bash
+
+kernel_version=$(uname -r)
+
+for i in $(seq 1 10);
+do
+    if [ -e /lib/modules/${kernel_version}/modules.dep ];then
+        wisko=$(cat /lib/modules/${kernel_version}/modules.dep | grep wistron)
+        ipdko=$(cat /lib/modules/${kernel_version}/modules.dep | grep ipd)
+        if [ "$wisko" == "" ] || [ "$ipdko" == "" ];then
+            depmod -a
+        else
+            if [ ! -e /lib/modules/${kernel_version}/modules.dep.bin ];then
+                depmod -a
+            else
+                break
+            fi
+        fi
+
+        echo "depmod -a"
+        sleep 1
+    else
+        sleep 1
+    fi
+done
+
+#Install sonic-platform package
+DEVICE="/usr/share/sonic/device"
+PLATFORM=$(/usr/local/bin/sonic-cfggen -H -v DEVICE_METADATA.localhost.platform)
+if [ -e $DEVICE/$PLATFORM/sonic_platform-1.0-py3-none-any.whl ]; then
+    pip3 install $DEVICE/$PLATFORM/sonic_platform-1.0-py3-none-any.whl
+fi
+
+systemctl enable platform-modules-6512-32r.service
+systemctl start platform-modules-6512-32r.service
+systemctl enable 6512-32r-platform.service
+systemctl start 6512-32r-platform.service
+systemctl enable 6512-32r-syseeprom.service
+systemctl start 6512-32r-syseeprom.service
+systemctl enable 6512-32r-firmware_ver.service
+systemctl start 6512-32r-firmware_ver.service
diff --git a/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-sw-to3200k.install b/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-sw-to3200k.install
new file mode 100644
index 000000000000..2323a24d6bcc
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-sw-to3200k.install
@@ -0,0 +1,4 @@
+sw-to3200k/utils/* usr/local/bin
+sw-to3200k/sonic_platform-1.0-py3-none-any.whl usr/share/sonic/device/x86_64-wistron_sw_to3200k-r0
+sw-to3200k/cfg/sw-to3200k-modules.conf etc/modules-load.d
+sw-to3200k/service/*.service lib/systemd/system
diff --git a/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-sw-to3200k.postinst b/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-sw-to3200k.postinst
new file mode 100644
index 000000000000..9a1d167da53d
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/debian/sonic-platform-wistron-sw-to3200k.postinst
@@ -0,0 +1,43 @@
+#!/bin/bash
+
+kernel_version=$(uname -r)
+
+for i in $(seq 1 10);
+do
+    if [ -e /lib/modules/${kernel_version}/modules.dep ];then
+        wisko=$(cat /lib/modules/${kernel_version}/modules.dep | grep wistron)
+        ipdko=$(cat /lib/modules/${kernel_version}/modules.dep | grep ipd)
+        if [ "$wisko" == "" ] || [ "$ipdko" == "" ];then
+            depmod -a
+        else
+            if [ ! -e /lib/modules/${kernel_version}/modules.dep.bin ];then
+                depmod -a
+            else
+                break
+            fi
+        fi
+
+        echo "depmod -a"
+        sleep 1
+    else
+        sleep 1
+    fi
+done
+
+#Install sonic-platform package
+DEVICE="/usr/share/sonic/device"
+PLATFORM=$(/usr/local/bin/sonic-cfggen -H -v DEVICE_METADATA.localhost.platform)
+if [ -e $DEVICE/$PLATFORM/sonic_platform-1.0-py3-none-any.whl ]; then
+    pip3 install $DEVICE/$PLATFORM/sonic_platform-1.0-py3-none-any.whl
+fi
+
+systemctl enable platform-modules-sw-to3200k.service
+systemctl start platform-modules-sw-to3200k.service
+systemctl enable sw-to3200k-firmware_ver.service
+systemctl start sw-to3200k-firmware_ver.service
+systemctl enable to3200k-platform.service
+systemctl start to3200k-platform.service
+systemctl enable to3200k-led.service
+systemctl start to3200k-led.service
+systemctl enable to3200k-pld.service
+systemctl start to3200k-pld.service
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_i2c_psu.c b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_i2c_psu.c
index 746e581486cb..5024ecdd70e6 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_i2c_psu.c
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_i2c_psu.c
@@ -342,25 +342,25 @@ static ssize_t set_value
         }
         case PSU_MFR_ID:
         {
-            memset(&data->mfr_id, 0x0, sizeof(data->mfr_id));
+            memzero_explicit(&data->mfr_id, sizeof(data->mfr_id));
             strncpy(data->mfr_id, buf, sizeof(data->mfr_id)-1);
             break;
         }
         case PSU_MFR_MODEL:
         {
-            memset(&data->mfr_model, 0x0, sizeof(data->mfr_model));
+            memzero_explicit(&data->mfr_model, sizeof(data->mfr_model));
             strncpy(data->mfr_model, buf, sizeof(data->mfr_model)-1);
             break;
         }
         case PSU_MFR_REVISION:
         {
-            memset(&data->mfr_revsion, 0x0, sizeof(data->mfr_revsion));
+            memzero_explicit(&data->mfr_revsion, sizeof(data->mfr_revsion));
             strncpy(data->mfr_revsion, buf, sizeof(data->mfr_revsion)-1);
             break;
         }
         case PSU_MFR_SERIAL:
         {
-            memset(&data->mfr_serial, 0x0, sizeof(data->mfr_serial));
+            memzero_explicit(&data->mfr_serial, sizeof(data->mfr_serial));
             strncpy(data->mfr_serial, buf, sizeof(data->mfr_serial)-1);
             break;
         }
@@ -403,7 +403,7 @@ static int wistron_i2c_psu_probe(struct i2c_client *client, const struct i2c_dev
         goto exit_free;
     }
 
-    data->hwmon_dev = hwmon_device_register(&client->dev);
+	data->hwmon_dev = hwmon_device_register_with_info(&client->dev, "wistron_i2c_psu", NULL, NULL, NULL);
     if (IS_ERR(data->hwmon_dev))
     {
         status = PTR_ERR(data->hwmon_dev);
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_fan.c b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_fan.c
index 82dfa71b7805..0f7e856e8330 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_fan.c
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_fan.c
@@ -16,6 +16,8 @@
 
 static ssize_t get_fan_value(struct device *dev, struct device_attribute *da, char *buf);
 static ssize_t set_fan_value(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
+static ssize_t get_version(struct device *dev, struct device_attribute *da, char *buf);
+static ssize_t set_version(struct device *dev, struct device_attribute *da, const char *buf, size_t count);
 
 enum fan_id {
     FAN1_ID,
@@ -49,7 +51,7 @@ enum sysfs_fan_attributes {
     FAN4_DIRECTION,
     FAN5_DIRECTION,
     FAN6_DIRECTION,
-    FAN7_DIRECTION, 
+    FAN7_DIRECTION,
     FAN1_FRONT_SPEED_RPM,
     FAN2_FRONT_SPEED_RPM,
     FAN3_FRONT_SPEED_RPM,
@@ -64,6 +66,7 @@ enum sysfs_fan_attributes {
     FAN5_REAR_SPEED_RPM,
     FAN6_REAR_SPEED_RPM,
     FAN7_REAR_SPEED_RPM,
+    CPLD_VERSION,
     FAN_ATTR_MAX
 };
 
@@ -71,9 +74,13 @@ enum sysfs_fan_attributes {
 struct sw_to3200k_fan_data {
     struct device   *hwmon_dev;
     struct mutex     update_lock;
+    int              version;
     int              fan_val[FAN_ATTR_MAX];
 };
 
+/* version */
+static SENSOR_DEVICE_ATTR(version, S_IWUSR | S_IRUGO, get_version, set_version, CPLD_VERSION);
+
 /* Define attributes */
 #define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \
     static SENSOR_DEVICE_ATTR(fan##index##_duty_cycle_percentage, S_IWUSR | S_IRUGO, get_fan_value, set_fan_value, FAN##index##_DUTY_CYCLE_PERCENTAGE)
@@ -171,9 +178,40 @@ static struct attribute *sw_to3200k_fan_attributes[] = {
     DECLARE_FAN_DIRECTION_ATTR(6),
     DECLARE_FAN_DIRECTION_ATTR(7),
     DECLARE_FAN_DUTY_CYCLE_ATTR(),
+    &sensor_dev_attr_version.dev_attr.attr,
     NULL
 };
 
+static ssize_t get_version(struct device *dev, struct device_attribute *da, char *buf)
+{
+	struct i2c_client               *client = to_i2c_client(dev);
+	struct sw_to3200k_fan_data     *data = i2c_get_clientdata(client);
+	int                             version;
+
+	mutex_lock(&data->update_lock);
+	version = data->version;
+	mutex_unlock(&data->update_lock);
+	return sprintf(buf, "%d", version);
+}
+
+static ssize_t set_version(struct device *dev, struct device_attribute *da, const char *buf, size_t count)
+{
+	struct i2c_client               *client = to_i2c_client(dev);
+	struct sw_to3200k_fan_data     *data = i2c_get_clientdata(client);
+	int                             error, version;
+
+	error = kstrtoint(buf, 10, &version);
+	if (error)
+	{
+		return error;
+	}
+
+	mutex_lock(&data->update_lock);
+	data->version = version;
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
 static ssize_t get_fan_value(struct device *dev, struct device_attribute *da, char *buf)
 {
     struct sensor_device_attribute  *attr = to_sensor_dev_attr(da);
@@ -245,7 +283,7 @@ static int sw_to3200k_fan_probe
         goto exit_free;
     }
 
-    data->hwmon_dev = hwmon_device_register(&client->dev);
+	data->hwmon_dev = hwmon_device_register_with_info(&client->dev, "wistron_fan", NULL, NULL, NULL);
     if (IS_ERR(data->hwmon_dev))
     {
         status = PTR_ERR(data->hwmon_dev);
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_oom.c b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_oom.c
index 6e1df229c9fd..3e26edff07cc 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_oom.c
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_oom.c
@@ -242,27 +242,27 @@ static ssize_t set_oom_info(struct device *dev, struct device_attribute *da, con
         {
             case OOM_EEPROM_LOW:
             {
-                memset(&data->eeproml, 0x0, sizeof(data->eeproml));
+                memzero_explicit(&data->eeproml, sizeof(data->eeproml));
                 break;
             }
             case OOM_EEPROM_PG0:
             {
-                memset(&data->eeprom0, 0x0, sizeof(data->eeprom0));
+                memzero_explicit(&data->eeprom0, sizeof(data->eeprom0));
                 break;
             }
             case OOM_EEPROM_PG2:
             {
-                memset(&data->eeprom2, 0x0, sizeof(data->eeprom2));
+                memzero_explicit(&data->eeprom2, sizeof(data->eeprom2));
                 break;
             }
             case OOM_EEPROM_PG3:
             {
-                memset(&data->eeprom3, 0x0, sizeof(data->eeprom3));
+                memzero_explicit(&data->eeprom3, sizeof(data->eeprom3));
                 break;
             }
             case OOM_EEPROM_PG11:
             {
-                memset(&data->eeprom11, 0x0, sizeof(data->eeprom11));
+                memzero_explicit(&data->eeprom11, sizeof(data->eeprom11));
                 break;
             }
             default:
@@ -332,7 +332,7 @@ static int sw_to3200k_oom_probe(struct i2c_client *client, const struct i2c_devi
         goto exit_free;
     }
 
-    data->hwmon_dev = hwmon_device_register(&client->dev);
+	data->hwmon_dev = hwmon_device_register_with_info(&client->dev, "wistron_oom", NULL, NULL, NULL);
     if (IS_ERR(data->hwmon_dev))
     {
         status = PTR_ERR(data->hwmon_dev);
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_psu.c b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_psu.c
index 849ec1315407..418e22240ace 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_psu.c
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_psu.c
@@ -140,7 +140,7 @@ static ssize_t set_string(struct device *dev, struct device_attribute *da, const
     struct sw_to3200k_psu_data      *data = i2c_get_clientdata(client);
     char                            tmp_str[32];
 
-    memset(&tmp_str, 0x0, sizeof(tmp_str));
+    memzero_explicit(&tmp_str, sizeof(tmp_str));
     if (attr->index == PSU_MODEL_NAME)
     {
         if (sscanf(buf, "%16s", tmp_str) != 1)
@@ -205,7 +205,7 @@ static int sw_to3200k_psu_probe(struct i2c_client *client,
         goto exit_free;
     }
 
-    data->hwmon_dev = hwmon_device_register(&client->dev);
+	data->hwmon_dev = hwmon_device_register_with_info(&client->dev, "wistron_psu", NULL, NULL, NULL);
     if (IS_ERR(data->hwmon_dev))
     {
         status = PTR_ERR(data->hwmon_dev);
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_thermal.c b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_thermal.c
index e96e9d723f46..a86d53a94fb3 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_thermal.c
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/modules/wistron_sw_to3200k_thermal.c
@@ -140,7 +140,7 @@ static int sw_to3200k_thermal_probe(struct i2c_client *client, const struct i2c_
         goto exit_free;
     }
 
-    data->hwmon_dev = hwmon_device_register(&client->dev);
+	data->hwmon_dev = hwmon_device_register_with_info(&client->dev, "wistron_thermal", NULL, NULL, NULL);
     if (IS_ERR(data->hwmon_dev))
     {
         status = PTR_ERR(data->hwmon_dev);
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/service/sw-to3200k-firmware_ver.service b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/service/sw-to3200k-firmware_ver.service
new file mode 100644
index 000000000000..c609042622c0
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/service/sw-to3200k-firmware_ver.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Wistron SW3200K Platform firmware version service
+After=platform-modules-sw-to3200k.service
+DefaultDependencies=no
+
+[Service]
+Type=oneshot
+ExecStart=/usr/local/bin/platform_firmware_version
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/__init__.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/__init__.py
index 0c73278ba9f5..afc599aeca4e 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/__init__.py
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/__init__.py
@@ -1,2 +1,2 @@
-__all__ = ["platform", "chassis", "sfp", "eeprom", "psu", "thermal", "fan", "watchdog"]
+__all__ = ["platform", "chassis", "sfp", "eeprom", "psu", "thermal", "fan", "watchdog", 'component']
 from . import platform
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/chassis.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/chassis.py
index 4effac20b6a4..655949d8fc56 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/chassis.py
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/chassis.py
@@ -8,7 +8,6 @@
 #############################################################################
 try:
     import sys
-    import os
     import time
     import subprocess
     from sonic_platform_base.chassis_base import ChassisBase
@@ -16,16 +15,19 @@
     raise ImportError(str(e) + "- required module not found")
 
 NUM_FAN = 14
+NUM_FANTRAY = 7
 NUM_PSU = 2
 NUM_THERMAL = 7
 NUM_SFP = 32
+NUM_COMPONENT = 6
 HOST_REBOOT_CAUSE_PATH = "/host/reboot-cause/"
 PMON_REBOOT_CAUSE_PATH = "/usr/share/sonic/platform/api_files/reboot-cause/"
 REBOOT_CAUSE_FILE = "reboot-cause.txt"
 PREV_REBOOT_CAUSE_FILE = "previous-reboot-cause.txt"
-HOST_CHK_CMD = "docker > /dev/null 2>&1"
-GET_HWSKU_CMD = "sonic-cfggen -d -v DEVICE_METADATA.localhost.hwsku"
-GET_PLATFORM_CMD = "sonic-cfggen -d -v DEVICE_METADATA.localhost.platform"
+HOST_CHK_CMD = ["docker"]
+GET_HWSKU_CMD = ["sonic-cfggen", "-d", "-v", "DEVICE_METADATA.localhost.hwsku"]
+GET_PLATFORM_CMD = ["sonic-cfggen", "-d", "-v", "DEVICE_METADATA.localhost.platform"]
+
 
 class Chassis(ChassisBase):
     """Platform-specific Chassis class"""
@@ -45,6 +47,7 @@ def __init__(self):
         self.__initialize_thermals()
         self.__initialize_sfp()
         self.__initialize_eeprom()
+        self.__initialize_components()
 
     def __initialize_sfp(self):
         from sonic_platform.sfp import Sfp
@@ -52,12 +55,12 @@ def __initialize_sfp(self):
             sfp_module = Sfp(index, 'QSFP_DD')
             self._sfp_list.append(sfp_module)
 
-
     def __initialize_fan(self):
-        from sonic_platform.fan import Fan
-        for fan_index in range(0, NUM_FAN):
-            fan = Fan(fan_index)
-            self._fan_list.append(fan)
+        from sonic_platform.fan_drawer import FanDrawer
+        for fan_index in range(0, NUM_FANTRAY):
+            fandrawer = FanDrawer(fan_index)
+            self._fan_drawer_list.append(fandrawer)
+            self._fan_list.extend(fandrawer._fan_list)
 
     def __initialize_psu(self):
         from sonic_platform.psu import Psu
@@ -75,8 +78,14 @@ def __initialize_eeprom(self):
         from sonic_platform.eeprom import Tlv
         self._eeprom = Tlv()
 
+    def __initialize_components(self):
+        from sonic_platform.component import Component
+        for index in range(0, NUM_COMPONENT):
+            component = Component(index)
+            self._component_list.append(component)
+
     def __is_host(self):
-        return os.system(HOST_CHK_CMD) == 0
+        return subprocess.call(HOST_CHK_CMD) == 0
 
     def __read_txt_file(self, file_path):
         try:
@@ -88,12 +97,12 @@ def __read_txt_file(self, file_path):
         return None
 
     def _get_sku_name(self):
-        p = subprocess.Popen(GET_HWSKU_CMD, shell=True, stdout=subprocess.PIPE)
+        p = subprocess.Popen(GET_HWSKU_CMD, stdout=subprocess.PIPE)
         out, err = p.communicate()
         return out.decode().rstrip('\n')
 
     def _get_platform_name(self):
-        p = subprocess.Popen(GET_PLATFORM_CMD, shell=True, stdout=subprocess.PIPE)
+        p = subprocess.Popen(GET_PLATFORM_CMD, stdout=subprocess.PIPE)
         out, err = p.communicate()
         return out.decode().rstrip('\n')
 
@@ -114,7 +123,7 @@ def get_base_mac(self):
         """
         return self._eeprom.get_mac()
 
-    def get_serial_number(self):
+    def get_serial(self):
         """
         Retrieves the hardware serial number for the chassis
         Returns:
@@ -181,7 +190,7 @@ def _get_sfp_presence(self):
         port_pres = {}
         for port in range(0, NUM_SFP):
             sfp = self._sfp_list[port]
-            port_pres[port] = sfp.get_presence()
+            port_pres[port] = 1 if sfp.get_presence() else 0
 
         return port_pres
 
@@ -217,7 +226,7 @@ def get_change_event(self, timeout=0):
                         port_dict[port] = '0'
 
             self._transceiver_presence = cur_presence
-            if change_event == True:
+            if change_event is True:
                 break
 
             if not forever:
@@ -231,3 +240,86 @@ def get_change_event(self, timeout=0):
             sfp.reinit()
 
         return True, ret_dict
+
+    def initizalize_system_led(self):
+        self.system_led = ""
+        return True
+
+    def set_status_led(self, color):
+        """
+        Sets the state of the system LED
+
+        Args:
+            color: A string representing the color with which to set the
+                   system LED
+
+        Returns:
+            bool: True if system LED state is set successfully, False if not
+        """
+        self.system_led = color
+        return True
+
+    def get_status_led(self):
+        """
+        Gets the state of the system LED
+
+        Returns:
+            A string, one of the valid LED color strings which could be vendor
+            specified.
+        """
+        return self.system_led
+
+
+    def get_presence(self):
+        """
+        Retrieves the presence of the Chassis
+        Returns:
+            bool: True if Chassis is present, False if not
+        """
+        return True
+
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+        return self._eeprom.get_model()
+
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        return True
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device. If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of entPhysicalContainedIn is '0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device or -1 if cannot determine the position
+        """
+        return -1
+
+    def is_replaceable(self):
+        """
+        Indicate whether this device is replaceable.
+        Returns:
+            bool: True if it is replaceable.
+        """
+        return False
+
+    def get_revision(self):
+        """
+        Retrieves the hardware revision of the device
+
+        Returns:
+            string: Revision value of device
+        """
+
+        return '0'
+
+    def get_thermal_manager(self):
+        raise NotImplementedError
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/component.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/component.py
new file mode 100644
index 000000000000..8b855e0a5f86
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/component.py
@@ -0,0 +1,240 @@
+#!/usr/bin/env python
+
+import subprocess
+from shlex import split
+from collections import namedtuple
+from functools import reduce
+
+
+try:
+    from sonic_platform_base.component_base import ComponentBase
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
+
+CPLD_ADDR_MAPPING = {
+    "CPLD1": "0-0061",
+    "CPLD2": "0-0062",
+    "MB_FPGA": "0-0060",
+    "FAN_CPLD" : "0-0066"
+}
+
+proc_output = namedtuple('proc_output', 'stdout stderr')
+SYSFS_PATH = "/sys/bus/i2c/devices/"
+#GET_BMC_VER_CMD= "ipmitool mc info | grep 'Firmware Revision' | awk '{printf $4}'"
+BIOS_VERSION_PATH = "/sys/class/dmi/id/bios_version"
+COMPONENT_LIST= [
+   ("BIOS", "Basic Input/Output System"),
+   ("CPLD1", "CPLD 1"),
+   ("CPLD2", "CPLD 2"),
+   ("MB_FPGA", "MB FPGA"),
+   ("FAN_CPLD", "FAN CPLD"),
+   ("BMC", "baseboard management controller")
+]
+
+class Component(ComponentBase):
+    """Platform-specific Component class"""
+
+    DEVICE_TYPE = "component"
+
+    def __init__(self, component_index=0):
+        ComponentBase.__init__(self)
+        self.index = component_index
+        self.name = self.get_name()
+
+    def pipeline(self, starter_command, *commands):
+        if not commands:
+            try:
+                starter_command, *commands = starter_command.split('|')
+            except AttributeError:
+                pass
+        starter_command = self._parse(starter_command)
+        starter = subprocess.Popen(starter_command, stdout=subprocess.PIPE)
+        last_proc = reduce(self._create_pipe, map(self._parse, commands), starter)
+        return proc_output(*last_proc.communicate())
+
+    def _create_pipe(self, previous, command):
+        proc = subprocess.Popen(command, stdin=previous.stdout, stdout=subprocess.PIPE)
+        previous.stdout.close()
+        return proc
+
+    def _parse(self, cmd):
+        try:
+            return split(cmd)
+        except Exception:
+            return cmd
+
+    def __read_txt_file(self, file_path):
+        try:
+            with open(file_path, 'r') as fd:
+                data = fd.read()
+                return data.strip()
+        except IOError:
+            pass
+        return ""
+
+    def __get_bios_version(self):
+        # Retrieves the BIOS firmware version
+        try:
+            with open(BIOS_VERSION_PATH, 'r') as fd:
+                bios_version = fd.read()
+                return bios_version.strip()
+        except Exception as e:
+            return None
+
+    def __get_bmc_version(self):
+        try:
+            #GET_BMC_VER_CMD
+            out, err = self.pipeline("ipmitool mc info", "grep 'Firmware Revision'", "awk '{printf $4}'")
+            return out.decode().rstrip('\n')
+        except Exception as e:
+            print('Get exception when read bmc')
+            return 'None'
+
+    def __get_cpld_version(self):
+        # Retrieves the CPLD firmware version
+        cpld_version = dict()
+        for cpld_name in CPLD_ADDR_MAPPING:
+            try:
+                cpld_path = "{}{}{}".format(SYSFS_PATH, CPLD_ADDR_MAPPING[cpld_name], '/version')
+                cpld_version_raw= int(self.__read_txt_file(cpld_path), 10)
+                cpld_version[cpld_name] = "{}".format(hex(cpld_version_raw))
+            except Exception as e:
+                print('Get exception when read cpld')
+                cpld_version[cpld_name] = 'None'
+
+        return cpld_version
+
+    def get_name(self):
+        """
+        Retrieves the name of the component
+         Returns:
+            A string containing the name of the component
+        """
+        return COMPONENT_LIST[self.index][0]
+
+    def get_description(self):
+        """
+        Retrieves the description of the component
+            Returns:
+            A string containing the description of the component
+        """
+        return COMPONENT_LIST[self.index][1]
+
+    def get_firmware_version(self):
+        """
+        Retrieves the firmware version of module
+        Returns:
+            string: The firmware versions of the module
+        """
+        fw_version = None
+
+        if self.name == "BIOS":
+            fw_version = self.__get_bios_version()
+        elif "BMC" in self.name:
+            fw_version = self.__get_bmc_version()
+        elif "CPLD" in self.name:
+            cpld_version = self.__get_cpld_version()
+            fw_version = cpld_version.get(self.name)
+        elif "FPGA" in self.name:
+            fpga_version = self.__get_cpld_version()
+            fw_version = fpga_version.get(self.name)
+
+        return fw_version
+
+    def install_firmware(self, image_path):
+        """
+        Install firmware to module
+        Args:
+            image_path: A string, path to firmware image
+        Returns:
+            A boolean, True if install successfully, False if not
+        """
+        raise NotImplementedError
+
+    def get_presence(self):
+        """
+        Retrieves the presence of the FAN
+        Returns:
+            bool: True if FAN is present, False if not
+        """
+        return True
+
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+        return 'N/A'
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of the device
+        Returns:
+            string: Serial number of device
+        """
+        return 'N/A'
+
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        return True
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device.
+        If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of
+        entPhysicalContainedIn is'0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device
+            or -1 if cannot determine the position
+        """
+        return -1
+
+    def is_replaceable(self):
+        """
+        Indicate whether this device is replaceable.
+        Returns:
+            bool: True if it is replaceable.
+        """
+        return False
+
+    def get_available_firmware_version(self, image_path):
+        """
+        Retrieves the available firmware version of the component
+        Note: the firmware version will be read from image
+        Args:
+            image_path: A string, path to firmware image
+        Returns:
+            A string containing the available firmware version of the component
+        """
+        return "N/A"
+
+    def get_firmware_update_notification(self, image_path):
+        """
+        Retrieves a notification on what should be done in order to complete
+        the component firmware update
+        Args:
+            image_path: A string, path to firmware image
+        Returns:
+            A string containing the component firmware update notification if required.
+            By default 'None' value will be used, which indicates that no actions are required
+        """
+        return "None"
+
+    def update_firmware(self, image_path):
+        """
+        Updates firmware of the component
+        This API performs firmware update: it assumes firmware installation and loading in a single call.
+        In case platform component requires some extra steps (apart from calling Low Level Utility)
+        to load the installed firmware (e.g, reboot, power cycle, etc.) - this will be done automatically by API
+        Args:
+            image_path: A string, path to firmware image
+        Raises:
+            RuntimeError: update failed
+        """
+        return False
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/eeprom.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/eeprom.py
index 448e083712ce..e495b297576a 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/eeprom.py
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/eeprom.py
@@ -41,12 +41,19 @@ def __parse_output(self, decode_output):
         for line in lines:
             try:
                 match = re.search(
-                    '(0x[0-9a-fA-F]{2})([\s]+[\S]+[\s]+)([\S]+)', line)
-                if match is not None:
+                    '(0x[0-9a-fA-F]{2})([\s]+[\S]+[\s]+)([\S]+[\s]+[\S]+)', line)
+                if match is not None and match.group(1) == '0x25':
                     idx = match.group(1)
                     value = match.group(3).rstrip('\0')
+                    _eeprom_info_dict[idx] = value
+                else:
+                    match = re.search(
+                        '(0x[0-9a-fA-F]{2})([\s]+[\S]+[\s]+)([\S]+)', line)
+                    if match is not None:
+                        idx = match.group(1)
+                        value = match.group(3).rstrip('\0')
+                        _eeprom_info_dict[idx] = value
 
-                _eeprom_info_dict[idx] = value
             except BaseException:
                 pass
         return _eeprom_info_dict
@@ -108,3 +115,7 @@ def get_serial(self):
 
     def get_mac(self):
         return self._eeprom.get('0x24', "Undefined.")
+
+    def get_model(self):
+        return self._eeprom.get('0x21', "Undefined.")
+
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/fan.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/fan.py
index f5b7f9e80ed6..9849cd472893 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/fan.py
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/fan.py
@@ -14,23 +14,66 @@
 except ImportError as e:
     raise ImportError(str(e) + "- required module not found")
 
+SPEED_TOLERANCE = 15
 FAN_PATH = "/sys/bus/i2c/devices/0-0066/"
-FANTRAY_NAME_LIST = ["FANTRAY-1", "FANTRAY-2",
-                     "FANTRAY-3", "FANTRAY-4",
-                     "FANTRAY-5", "FANTRAY-6", "FANTRAY-7"]
-FAN_NAME_LIST = ["fan1_front","fan2_front","fan3_front","fan4_front","fan5_front","fan6_front", "fan7_front",\
-"fan1_rear","fan2_rear","fan3_rear","fan4_rear", "fan5_rear", "fan6_rear", "fan7_rear",]
+SYSFS_PATH = "/sys/bus/i2c/devices/{0}-00{1}"
+PSU_STS_I2C_MAPPING = {
+    0: {
+        "num": 0,
+        "addr": "51"
+    },
+    1: {
+        "num": 0,
+        "addr": "52"
+    },
+}
+
+PSU_HWMON_I2C_MAPPING = {
+    0: {
+        "num": 0,
+        "addr": "59"
+    },
+    1: {
+        "num": 0,
+        "addr": "5a"
+    },
+}
+
+FAN_NAME_LIST = ["FAN-1F", "FAN-1R", "FAN-2F", "FAN-2R",
+                 "FAN-3F", "FAN-3R", "FAN-4F", "FAN-4R",
+                 "FAN-5F", "FAN-5R", "FAN-6F", "FAN-6R",
+                 "FAN-7F", "FAN-7R"]
 
 class Fan(FanBase):
     """Platform-specific Fan class"""
 
-    def __init__(self, fan_index):
-        self.fan_tray_index = fan_index
-        self.fan_presence = "fan{}_presence"
-        self.fan_direction = "fan{}_direction"
-        self.fan_speed_rpm = "fan{}_{}_speed_rpm"
+    def __init__(self, fan_tray_index, fan_index=0, is_psu_fan=False, psu_index=0):
+        self.fan_index = fan_index
+        self.fan_tray_index = fan_tray_index
+        self.is_psu_fan = is_psu_fan
+
+        if self.is_psu_fan:
+            self.psu_index = psu_index
+            self.psu_status_i2c_num = PSU_STS_I2C_MAPPING[self.psu_index]['num']
+            self.psu_status_i2c_addr = PSU_STS_I2C_MAPPING[self.psu_index]['addr']
+            self.psu_status_path = SYSFS_PATH.format(self.psu_status_i2c_num, self.psu_status_i2c_addr)
+            self.psu_hwmon_i2c_num = PSU_HWMON_I2C_MAPPING[self.psu_index]['num']
+            self.psu_hwmon_i2c_addr = PSU_HWMON_I2C_MAPPING[self.psu_index]['addr']
+            self.psu_hwmon_path = SYSFS_PATH.format(self.psu_hwmon_i2c_num, self.psu_hwmon_i2c_addr)
+
+
         FanBase.__init__(self)
 
+    def __search_hwmon_dir_name(self, directory):
+        try:
+            dirs = os.listdir(directory)
+            for file in dirs:
+                if file.startswith("hwmon"):
+                    return file
+        except IOError:
+            pass
+        return ''
+
     def __read_txt_file(self, file_path):
         try:
             with open(file_path, 'r') as fd:
@@ -38,22 +81,14 @@ def __read_txt_file(self, file_path):
                 return data.strip()
         except IOError:
             pass
-        return ""
+        return None
 
-    def __write_txt_file(self, file_path, value):
+    def __write_txt_file(self, file_path, data):
         try:
             with open(file_path, 'w') as fd:
-                fd.write(str(value))
-        except BaseException:
-            return False
-        return True
-
-    def __search_file_by_name(self, directory, file_name):
-        for dirpath, dirnames, files in os.walk(directory):
-            for name in files:
-                file_path = os.path.join(dirpath, name)
-                if name in file_name:
-                    return file_path
+                fd.write(data)
+        except IOError:
+            pass
         return None
 
     def get_direction(self):
@@ -63,38 +98,46 @@ def get_direction(self):
             A string, either FAN_DIRECTION_INTAKE or FAN_DIRECTION_EXHAUST
             depending on fan direction
         """
-        index1=self.fan_tray_index
-        if self.fan_tray_index>6:
-            index1=self.fan_tray_index%7
-        fan_direction_file = (FAN_PATH +
-            self.fan_direction.format(index1+1))
-        raw = self.__read_txt_file(fan_direction_file).strip('\r\n')
-        direction = self.FAN_DIRECTION_INTAKE if str(
-            raw).upper() == "1" else self.FAN_DIRECTION_EXHAUST
+        direction = 0
+        if self.is_psu_fan:
+            path= "{}/psu_fan_dir".format(self.psu_status_path)
+            direction=self.__read_txt_file(path)
+            if direction is None:
+                return self.FAN_DIRECTION_EXHAUST
+        elif self.get_presence():
+            path= "{}/fan{}_direction".format(FAN_PATH, self.fan_tray_index + 1)
+            direction=self.__read_txt_file(path)
+            if direction is None:
+                return self.FAN_DIRECTION_EXHAUST
+
+        return self.FAN_DIRECTION_EXHAUST if int(direction) == 0 else self.FAN_DIRECTION_INTAKE
 
-        return direction
 
     def get_speed(self):
         """
         Retrieves the speed of fan as a percentage of full speed
         Returns:
             An integer, the percentage of full fan speed, in the range 0 (off)
-                 to 12000 (full speed)
-        """
-        if self.fan_tray_index<=6:
-            index1=self.fan_tray_index
-            speed = 0
-            if self.get_presence():
-                fan_speed_file = (FAN_PATH +
-                self.fan_speed_rpm.format(index1+1,"front"))
-                speed = self.__read_txt_file(fan_speed_file).strip('\r\n')
-        else:
-            index1=self.fan_tray_index%7
-            if self.get_presence():
-                fan_speed_file = (FAN_PATH +
-                self.fan_speed_rpm.format(index1+1,"rear"))
-                speed = self.__read_txt_file(fan_speed_file).strip('\r\n')
-            
+                 to 100 (full speed)
+
+        """
+        speed = 0
+        if self.is_psu_fan:
+            psu_fan_path= "{}/{}".format(self.psu_hwmon_path, 'fan1_input')
+            fan_speed_rpm = self.__read_txt_file(psu_fan_path)
+            if fan_speed_rpm is not None:
+                speed = (int(fan_speed_rpm,10))*100/33000
+                if speed > 100:
+                    speed=100
+            else:
+                return 0
+        elif self.get_presence():
+            path= "{}/fan_duty_cycle_percentage".format(FAN_PATH)
+            speed=self.__read_txt_file(path)
+            if speed is None:
+                return 0
+            return int(int(speed)*100/255)
+
         return int(speed)
 
     def get_target_speed(self):
@@ -103,22 +146,14 @@ def get_target_speed(self):
         Returns:
             An integer, the percentage of full fan speed, in the range 0 (off)
                  to 100 (full speed)
-        """
-        if self.fan_tray_index<=6:
-            index1=self.fan_tray_index
-            speed = 0
-            if self.get_presence():
-                fan_speed_file = (FAN_PATH +
-                self.fan_speed_rpm.format(index1+1,"front"))
-                speed = self.__read_txt_file(fan_speed_file).strip('\r\n')
-        else:
-            index1=self.fan_tray_index%7
-            if self.get_presence():
-                fan_speed_file = (FAN_PATH +
-                self.fan_speed_rpm.format(index1+1,"rear"))
-                speed = self.__read_txt_file(fan_speed_file).strip('\r\n')
 
-        return int(speed)
+        Note:
+            speed_pc = pwm_target/255*100
+
+            0   : when PWM mode is use
+            pwm : when pwm mode is not use
+        """
+        return self.get_speed()
 
     def get_speed_tolerance(self):
         """
@@ -127,7 +162,7 @@ def get_speed_tolerance(self):
             An integer, the percentage of variance from target speed which is
                  considered tolerable
         """
-        return 10
+        return SPEED_TOLERANCE
 
     def set_speed(self, speed):
         """
@@ -138,13 +173,8 @@ def set_speed(self, speed):
         Returns:
             A boolean, True if speed is set successfully, False if not
 
-        Note:
-            Depends on pwm or target mode is selected:
-            1) pwm = speed_pc * 255             <-- Currently use this mode.
-            2) target_pwm = speed_pc * 100 / 255
-             2.1) set pwm{}_enable to 3
-
         """
+
         return False
 
     def set_status_led(self, color):
@@ -156,7 +186,22 @@ def set_status_led(self, color):
         Returns:
             bool: True if status LED state is set successfully, False if not
         """
-        return False
+        return False #Not supported
+
+    def get_status_led(self):
+        """
+        Gets the state of the fan status LED
+        Returns:
+            A string, one of the predefined STATUS_LED_COLOR_* strings above
+        """
+        status=self.get_presence()
+        if status is None:
+            return  self.STATUS_LED_COLOR_OFF
+
+        return {
+            1: self.STATUS_LED_COLOR_GREEN,
+            0: self.STATUS_LED_COLOR_RED
+        }.get(status, self.STATUS_LED_COLOR_OFF)
 
     def get_name(self):
         """
@@ -164,24 +209,30 @@ def get_name(self):
             Returns:
             string: The name of the device
         """
-        fan_name = FAN_NAME_LIST[self.fan_tray_index]
+
+        fan_name = FAN_NAME_LIST[self.fan_tray_index*2 + self.fan_index] \
+            if not self.is_psu_fan \
+            else "PSU-{} FAN-{}".format(self.psu_index+1, self.fan_index+1)
 
         return fan_name
 
     def get_presence(self):
         """
-        Retrieves the presence of the PSU
+        Retrieves the presence of the FAN
         Returns:
-            bool: True if PSU is present, False if not
+            bool: True if FAN is present, False if not
         """
-        index1=self.fan_tray_index
-        if self.fan_tray_index>6:
-            index1=self.fan_tray_index%7
-        fan_direction_file = (FAN_PATH +
-                              self.fan_presence.format(index1+1))
-        present_str = self.__read_txt_file(fan_direction_file) or '1'
 
-        return int(present_str) == 1
+        if self.is_psu_fan:
+            present_path="{}/psu_present".format(self.psu_status_path)
+        else:
+            present_path="{}/fan{}_presence".format(FAN_PATH, self.fan_tray_index + 1)
+
+        val=self.__read_txt_file(present_path)
+        if val is not None:
+            return int(val, 10)==1
+        else:
+            return False
 
     def get_status(self):
         """
@@ -189,4 +240,55 @@ def get_status(self):
         Returns:
             A boolean value, True if device is operating properly, False if not
         """
-        return self.get_presence() and self.get_speed() > 0
+        if self.is_psu_fan:
+            psu_fan_path= "{}/{}".format(self.psu_status_path, 'psu_power_good')
+            val=self.__read_txt_file(psu_fan_path)
+            if val is not None:
+                return int(val, 10)==1
+            else:
+                return False
+        else:
+            status=self.get_presence()
+            if status is None:
+                return  False
+            return status
+
+
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+
+        return "N/A"
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of the device
+        Returns:
+            string: Serial number of device
+        """
+        return "N/A"
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device.
+        If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of
+        entPhysicalContainedIn is'0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device
+            or -1 if cannot determine the position
+        """
+        return (self.fan_tray_index * 2 + self.fan_index + 1) \
+            if not self.is_psu_fan else (self.psu_index + 1)
+
+    def is_replaceable(self):
+        """
+        Indicate whether this device is replaceable.
+        Returns:
+            bool: True if it is replaceable.
+        """
+        return True if not self.is_psu_fan else False
+
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/fan_drawer.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/fan_drawer.py
new file mode 100644
index 000000000000..c299adec1dec
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/fan_drawer.py
@@ -0,0 +1,119 @@
+########################################################################
+#
+# Module contains an implementation of SONiC Platform Base API and
+# provides the Fan-Drawers' information available in the platform.
+#
+########################################################################
+
+try:
+    from sonic_platform_base.fan_drawer_base import FanDrawerBase
+except ImportError as e:
+    raise ImportError(str(e) + "- required module not found")
+
+FANS_PER_FANTRAY = 2
+MAX_FAN_WATT = 20.0
+
+class FanDrawer(FanDrawerBase):
+    """Platform-specific Fan class"""
+
+    def __init__(self, fantray_index):
+
+        FanDrawerBase.__init__(self)
+        # FanTray is 0-based in platforms
+        self.fantrayindex = fantray_index
+        self.__initialize_fan_drawer()
+
+
+    def __initialize_fan_drawer(self):
+        from sonic_platform.fan import Fan
+        for i in range(FANS_PER_FANTRAY):
+            self._fan_list.append(Fan(self.fantrayindex, i))
+
+    def get_name(self):
+        """
+        Retrieves the fan drawer name
+        Returns:
+            string: The name of the device
+        """
+        return "FanTray{}".format(self.fantrayindex+1)
+
+    def get_presence(self):
+        """
+        Retrieves the presence of the device
+        Returns:
+            bool: True if device is present, False if not
+        """
+        return self._fan_list[0].get_presence()
+
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+        return self._fan_list[0].get_model()
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of the device
+        Returns:
+            string: Serial number of device
+        """
+        return self._fan_list[0].get_serial()
+
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        return self._fan_list[0].get_status()
+
+    def set_status_led(self, color):
+        """
+        Sets the state of the fan drawer status LED
+        Args:
+            color: A string representing the color with which to set the
+                   fan drawer status LED
+        Returns:
+            bool: True if status LED state is set successfully, False if not
+        """
+        return self._fan_list[0].set_status_led(color)
+    def get_status_led(self):
+        """
+        Gets the state of the fan drawer LED
+
+        Returns:
+           A string, one of the predefined STATUS_LED_COLOR_* strings above
+        """
+        return self._fan_list[0].get_status_led()
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device.
+        If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of
+        entPhysicalContainedIn is'0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device
+            or -1 if cannot determine the position
+        """
+        return (self.fantrayindex+1)
+
+    def is_replaceable(self):
+        """
+        Indicate whether this device is replaceable.
+        Returns:
+            bool: True if it is replaceable.
+        """
+        return True
+
+    def get_maximum_consumed_power(self):
+        """
+        Retrives the maximum power drawn by Fan Drawer
+        Returns:
+            A float, with value of the maximum consumable power of the
+            component.
+        """
+        return MAX_FAN_WATT
+
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/psu.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/psu.py
index c26b82ee4c76..78089ca3c986 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/psu.py
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/psu.py
@@ -22,12 +22,20 @@ class Psu(PsuBase):
                       "/sys/bus/i2c/devices/0-005a"]
 
     def __init__(self, psu_index):
+        self._fan_list = []
         self.PSU_TEMP_MAX = 85 * 1000
         self.PSU_OUTPUT_POWER_MAX = 1300 * 1000
         self.PSU_OUTPUT_VOLTAGE_MIN = 11400
         self.PSU_OUTPUT_VOLTAGE_MAX = 12600
         self.index = psu_index
         PsuBase.__init__(self)
+        self.__initialize_fan()
+
+    def __initialize_fan(self):
+        from sonic_platform.fan import Fan
+        for fan_index in range(0, 1):
+                fan = Fan(fan_index, 0, is_psu_fan=True, psu_index=self.index)
+                self._fan_list.append(fan)
 
     def __read_txt_file(self, file_path):
         try:
@@ -38,15 +46,14 @@ def __read_txt_file(self, file_path):
             pass
         return ""
 
-    def get_fan(self):
+    def get_fan(self, index):
         """
         Retrieves object representing the fan module contained in this PSU
         Returns:
             An object dervied from FanBase representing the fan module
             contained in this PSU
         """
-        # Hardware not supported
-        return False
+        return self._fan_list[index]
 
     def get_powergood_status(self):
         """
@@ -84,7 +91,7 @@ def get_presence(self):
             bool: True if PSU is present, False if not
         """
         attr_file ='psu_present'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
+        attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
         status = 0
         try:
             with open(attr_path, 'r') as psu_prs:
@@ -101,7 +108,7 @@ def get_status(self):
             A boolean value, True if device is operating properly, False if not
         """
         attr_file = 'psu_power_good'
-        attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
+        attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
         status = 0
         try:
             with open(attr_path, 'r') as power_status:
@@ -120,13 +127,11 @@ def get_model(self):
         try:
             if self.get_presence():
                 attr_file = 'psu_model_name'
-                attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
                 val = self.__read_txt_file(attr_path)
                 return str(val)
         except Exception as e:
-            logger.error(str(e))
-
-        return None
+            return None
 
     def get_serial(self):
         """
@@ -137,13 +142,11 @@ def get_serial(self):
         try:
             if self.get_presence():
                 attr_file = 'psu_serial_number'
-                attr_path = self.SYSFS_PSU_DIR[self.index-1] +'/' + attr_file
+                attr_path = self.SYSFS_PSU_DIR[self.index] +'/' + attr_file
                 val = self.__read_txt_file(attr_path)
                 return str(val)
         except Exception as e:
-            logger.error(str(e))
-
-        return None
+            return None
 
     def get_voltage(self):
         """
@@ -154,13 +157,11 @@ def get_voltage(self):
         try:
             if self.get_presence():
                 attr_file = 'psu_v_out'
-                attr_path = self.STATUS_PSU_DIR[self.index-1] +'/' + attr_file
+                attr_path = self.STATUS_PSU_DIR[self.index] +'/' + attr_file
                 val = self.__read_txt_file(attr_path)
-                return int(val)
+                return float(val) / 1000.0
         except Exception as e:
-            logger.error(str(e))
-
-        return None
+            return None
 
     def get_current(self):
         """
@@ -171,13 +172,11 @@ def get_current(self):
         try:
             if self.get_presence():
                 attr_file = 'psu_i_out'
-                attr_path = self.STATUS_PSU_DIR[self.index-1] +'/' + attr_file
+                attr_path = self.STATUS_PSU_DIR[self.index] +'/' + attr_file
                 val = self.__read_txt_file(attr_path)
-                return int(val)
+                return float(val) / 1000.0
         except Exception as e:
-            logger.error(str(e))
-
-        return None
+            return None
 
     def get_power(self):
         """
@@ -188,13 +187,11 @@ def get_power(self):
         try:
             if self.get_presence():
                 attr_file = 'psu_p_out'
-                attr_path = self.STATUS_PSU_DIR[self.index-1] +'/' + attr_file
+                attr_path = self.STATUS_PSU_DIR[self.index] +'/' + attr_file
                 val = self.__read_txt_file(attr_path)
-                return int(val)
+                return float(val) / 1000000.0
         except Exception as e:
-            logger.error(str(e))
-
-        return None
+            return None
 
     def get_status_led(self):
         """
@@ -221,13 +218,11 @@ def get_temperature(self):
         try:
             if self.get_presence():
                 attr_file = 'psu_temp1_input'
-                attr_path = self.STATUS_PSU_DIR[self.index-1] +'/' + attr_file
+                attr_path = self.STATUS_PSU_DIR[self.index] +'/' + attr_file
                 val = self.__read_txt_file(attr_path)
-                return int(val)
+                return float(val) / 1000.0
         except Exception as e:
-            logger.error(str(e))
-
-        return None
+            return None
 
     def get_temperature_high_threshold(self):
         """
@@ -272,7 +267,42 @@ def get_position_in_parent(self):
         Returns:
             integer: The 1-based relative physical position in parent device or -1 if cannot determine the position
         """
-        return -1
+        return self.index + 1
 
     def is_replaceable(self):
         return True
+
+    def get_revision(self):
+        """
+        Retrieves the hardware revision of the device
+        Returns:
+            string: Revision value of device
+        """
+        try:
+            if self.get_presence():
+                attr_file = 'psu_mfr_revision'
+                attr_path = self.STATUS_PSU_DIR[self.index] +'/' + attr_file
+                with open(attr_path, 'r') as revision:
+                    val = revision.read()
+                return val.strip()
+        except IOError:
+            return None
+
+    def get_num_fans(self):
+        """
+        Retrieves the number of fan modules available on this PSU
+
+        Returns:
+            An integer, the number of fan modules available on this PSU
+        """
+        return len(self._fan_list)
+
+    def get_all_fans(self):
+        """
+        Retrieves all fan modules available on this PSU
+
+        Returns:
+            A list of objects derived from FanBase representing all fan
+            modules available on this PSU
+        """
+        return self._fan_list
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/sfp.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/sfp.py
index 004bda2ada66..63225a040472 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/sfp.py
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/sfp.py
@@ -11,6 +11,8 @@
     from sonic_platform_base.sonic_sfp.qsfp_dd import qsfp_dd_InterfaceId
     from sonic_platform_base.sonic_sfp.qsfp_dd import qsfp_dd_Dom
     from sonic_platform_base.sonic_sfp.sffbase import sffbase
+    from sonic_platform_base.sonic_sfp.sff8024 import type_abbrv_name
+    from sonic_platform_base.sonic_sfp.sff8024 import type_of_media_interface
     from sonic_py_common.logger import Logger
     import sys
 except ImportError as e:
@@ -277,6 +279,7 @@ def __init__(self, sfp_index, sfp_type):
         # Init index
         self.index = sfp_index
         self.port_num = self.index + 1
+        self.abbrv = None
 
         # Init eeprom path
         eeprom_low_path = '/sys/bus/i2c/devices/0-00{}/eeprom_low'
@@ -328,7 +331,7 @@ def get_presence(self):
         except IOError:
             return False
         logger.log_info("debug:port_ %s sfp presence is %s" % (str(self.index), str(presence)))
-        return presence
+        return True if presence == 1 else False
 
     def _read_eeprom_specific_bytes(self, offset, num_bytes, page = 0):
         sysfsfile_eeprom = None
@@ -383,8 +386,10 @@ def _detect_sfp_type(self, sfp_type):
         if eeprom_raw:
             if eeprom_raw[0] in QSFP_TYPE_CODE_LIST:
                 self.sfp_type = QSFP_TYPE
+                self.abbrv = type_abbrv_name[eeprom_raw[0]]
             elif eeprom_raw[0] in QSFP_DD_TYPE_CODE_LIST:
                 self.sfp_type = QSFP_DD_TYPE
+                self.abbrv = type_abbrv_name[eeprom_raw[0]]
             else:
                 # we don't regonize this identifier value, treat the xSFP module as the default type
                 self.sfp_type = sfp_type
@@ -395,6 +400,7 @@ def _detect_sfp_type(self, sfp_type):
             # eeprom_raw being None indicates the module is not present.
             # in this case we treat it as the default type according to the SKU
             self.sfp_type = sfp_type
+            self.abbrv = type_abbrv_name['18']
 
     def _dom_capability_detect(self):
 
@@ -426,7 +432,7 @@ def _dom_capability_detect(self):
             if qsfp_dom_capability_raw is not None:
                 qsfp_version_compliance_raw = self._read_eeprom_specific_bytes(QSFP_VERSION_COMPLIANCE_OFFSET, QSFP_VERSION_COMPLIANCE_WIDTH)
                 qsfp_version_compliance = int(qsfp_version_compliance_raw[0], 16)
-                dom_capability = sfpi_obj.parse_qsfp_dom_capability(qsfp_dom_capability_raw, 0)
+                dom_capability = sfpi_obj.parse_dom_capability(qsfp_dom_capability_raw, 0)
                 if qsfp_version_compliance >= 0x08:
                     self.dom_temp_supported = dom_capability['data']['Temp_support']['value'] == 'On'
                     self.dom_volt_supported = dom_capability['data']['Voltage_support']['value'] == 'On'
@@ -462,11 +468,13 @@ def _dom_capability_detect(self):
 
             self.dom_temp_supported = True
             self.dom_volt_supported = True
+            self.dom_rx_tx_power_bias_supported = False
+            self.dom_tx_bias_power_supported = True
 
             # two types of QSFP-DD cable types supported: Copper and Optical.
             qsfp_dom_capability_raw = self._read_eeprom_specific_bytes(QSFP_DD_FLAT_MEM['offset'], QSFP_DD_FLAT_MEM['width'], QSFP_DD_FLAT_MEM['page'])
             if qsfp_dom_capability_raw is not None:
-                dom_capability = sfpi_obj.parse_qsfp_dom_capability(qsfp_dom_capability_raw, 0)
+                dom_capability = sfpi_obj.parse_dom_capability(qsfp_dom_capability_raw, 0)
                 if dom_capability['data']['Flat_MEM']['value'] == 'Off':
 
                     ext_dd = ext_qsfp_dd()
@@ -474,8 +482,8 @@ def _dom_capability_detect(self):
                     mon_sup_data = ext_dd.parse_mon_capability(mon_sup_raw, 0)
 
                     self.dom_thresholds_supported = mon_sup_data['data']['Tx_power_support']['value'] == 'On'
-                    self.dom_rx_power_supported = mon_sup_data['data']['Tx_power_support']['value'] == 'On'
-                    self.dom_tx_power_supported = mon_sup_data['data']['Rx_power_support']['value'] == 'On'
+                    self.dom_rx_power_supported = mon_sup_data['data']['Rx_power_support']['value'] == 'On'
+                    self.dom_tx_power_supported = mon_sup_data['data']['Tx_power_support']['value'] == 'On'
                     self.dom_tx_bias_supported = mon_sup_data['data']['Tx_bias_support']['value'] == 'On'
                     #self.dom_temp_supported = mon_sup_data['data']['Temp_support']['value'] == 'On'
                     #self.dom_volt_supported = mon_sup_data['data']['Voltage_support']['value'] == 'On'
@@ -490,7 +498,7 @@ def _dom_capability_detect(self):
 
     def _convert_string_to_num(self, value_str):
         if "-inf" in value_str:
-            return 'N/A'
+            return '-inf'
         elif "Unknown" in value_str:
             return 'N/A'
         elif 'dBm' in value_str:
@@ -534,8 +542,19 @@ def get_transceiver_info(self):
         application_advertisement  |1*255VCHAR     |supported applications advertisement
         ================================================================================
         """
+        self.reinit()
+        info_dict_keys = [
+        'type', 'hardware_rev', 'serial', 'manufacturer',
+        'model', 'connector', 'encoding', 'ext_identifier',
+        'ext_rateselect_compliance', 'cable_type', 'cable_length',
+        'nominal_bit_rate', 'specification_compliance', 'vendor_date',
+        'vendor_oui', 'application_advertisement', 'type_abbrv_name']
+
         transceiver_info_dict = {}
         compliance_code_dict = {}
+        transceiver_info_dict = dict.fromkeys(info_dict_keys, "NA")
+        transceiver_info_dict["specification_compliance"] = '{}'
+        transceiver_info_dict['type_abbrv_name'] = self.abbrv
 
         #QSFP
         if self.sfp_type == QSFP_TYPE:
@@ -684,6 +703,7 @@ def get_transceiver_info(self):
                 if sfp_media_type_dict is None:
                     return None
 
+                transceiver_info_dict['specification_compliance'] = type_of_media_interface[sfp_media_type_raw[0]]
                 host_media_list = ""
                 sfp_application_type_first_list = self._read_eeprom_specific_bytes((XCVR_FIRST_APPLICATION_LIST_OFFSET_QSFP_DD), XCVR_FIRST_APPLICATION_LIST_WIDTH_QSFP_DD)
                 possible_application_count = 8
@@ -711,7 +731,6 @@ def get_transceiver_info(self):
             transceiver_info_dict['encoding'] = "Not supported for CMIS cables"
             transceiver_info_dict['ext_identifier'] = str(sfp_ext_identifier_data['data']['Extended Identifier']['value'])
             transceiver_info_dict['ext_rateselect_compliance'] = "Not supported for CMIS cables"
-            transceiver_info_dict['specification_compliance'] = "Not supported for CMIS cables"
             transceiver_info_dict['cable_type'] = "Length Cable Assembly(m)"
             transceiver_info_dict['cable_length'] = str(sfp_cable_len_data['data']['Length Cable Assembly(m)']['value'])
             transceiver_info_dict['nominal_bit_rate'] = "Not supported for CMIS cables"
@@ -748,6 +767,7 @@ def get_transceiver_bulk_status(self):
         TX power                   |INT            |TX output power in mW
         ========================================================================
         """
+        self.reinit()
         transceiver_dom_info_dict = {}
 
         dom_info_dict_keys = ['temperature',    'voltage',
@@ -844,7 +864,7 @@ def get_transceiver_bulk_status(self):
 
                 dom_data_raw = self._read_eeprom_specific_bytes(QSFP_DD_CHANNL_MON['offset'], QSFP_DD_CHANNL_MON['width'], QSFP_DD_CHANNL_MON['page'])
                 dom_channel_monitor_data =  sfpd_obj.parse_channel_monitor_params(dom_data_raw, 0)
-                if self.dom_rx_power_supported:
+                if self.dom_tx_power_supported:
                     transceiver_dom_info_dict['tx1power'] = dom_channel_monitor_data['data']['TX1Power']['value']
                     transceiver_dom_info_dict['tx2power'] = dom_channel_monitor_data['data']['TX2Power']['value']
                     transceiver_dom_info_dict['tx3power'] = dom_channel_monitor_data['data']['TX3Power']['value']
@@ -907,6 +927,7 @@ def get_transceiver_threshold_info(self):
         txbiaslowwarning           |FLOAT          |Low Warning Threshold value of tx Bias Current in mA.
         ========================================================================
         """
+        self.reinit()
         transceiver_dom_threshold_info_dict = {}
 
         dom_info_dict_keys = ['temphighalarm',    'temphighwarning',
@@ -1031,6 +1052,7 @@ def get_rx_los(self):
             A Boolean, True if SFP has RX LOS, False if not.
             Note : RX LOS status is latched until a call to get_rx_los or a reset.
         """
+        self.reinit()
         if not self.dom_supported:
             return None
 
@@ -1052,7 +1074,7 @@ def get_rx_los(self):
             if self.dom_rx_tx_power_bias_supported: #not implement
                 dom_channel_monitor_raw = self._read_eeprom_specific_bytes(QSFP_DD_CHANNL_RX_LOS_STATUS['offset'], QSFP_DD_CHANNL_RX_LOS_STATUS['width'], QSFP_DD_CHANNL_RX_LOS_STATUS['page'])
                 if dom_channel_monitor_raw is not None:
-                    rx_los_data = int(dom_channel_monitor_raw[0], 8)
+                    rx_los_data = int(dom_channel_monitor_raw[0], 16)
                     rx_los_list.append(rx_los_data & 0x01 != 0)
                     rx_los_list.append(rx_los_data & 0x02 != 0)
                     rx_los_list.append(rx_los_data & 0x04 != 0)
@@ -1072,6 +1094,7 @@ def get_tx_fault(self):
             A Boolean, True if SFP has TX fault, False if not
             Note : TX fault status is lached until a call to get_tx_fault or a reset.
         """
+        self.reinit()
         if not self.dom_supported:
             return None
 
@@ -1104,6 +1127,7 @@ def get_tx_disable(self):
         for SFP, the TX Disable State and Soft TX Disable Select is ORed as the tx_disable status returned
                  These two bits are bit 7 & 6 in byte 110 page a2 respectively
         """
+        self.reinit()
         if not self.dom_supported:
             return None
 
@@ -1174,6 +1198,7 @@ def get_temperature(self):
         Returns:
             An integer number of current temperature in Celsius
         """
+        self.reinit()
         if not self.dom_supported:
             return None
         #QSFP
@@ -1218,6 +1243,7 @@ def get_voltage(self):
         Returns:
             An integer number of supply voltage in mV
         """
+        self.reinit()
         if not self.dom_supported:
             return None
 
@@ -1263,6 +1289,7 @@ def get_tx_bias(self):
             for channel 0 to channel 4.
             Ex. ['110.09', '111.12', '108.21', '112.09']
         """
+        self.reinit()
         tx_bias_list = []
 
         #QSFP
@@ -1289,7 +1316,7 @@ def get_tx_bias(self):
                 if sfpd_obj is None:
                     return None
 
-                if dom_tx_bias_power_supported:
+                if self.dom_tx_bias_power_supported:
                     dom_tx_bias_raw = self._read_eeprom_specific_bytes(QSFP_DD_TX_BIAS['offset'], QSFP_DD_TX_BIAS['width'], QSFP_DD_TX_BIAS['page'])
                     if dom_tx_bias_raw is not None:
                         dom_tx_bias_data = sfpd_obj.parse_dom_tx_bias(dom_tx_bias_raw, 0)
@@ -1313,6 +1340,7 @@ def get_rx_power(self):
             power in mW for channel 0 to channel 4.
             Ex. ['1.77', '1.71', '1.68', '1.70']
         """
+        self.reinit()
         rx_power_list = []
 
         #QSFP
@@ -1368,6 +1396,7 @@ def get_tx_power(self):
             for channel 0 to channel 4.
             Ex. ['1.86', '1.86', '1.86', '1.86']
         """
+        self.reinit()
         tx_power_list = []
 
         #QSFP
@@ -1513,3 +1542,40 @@ def get_serial(self):
         transceiver_dom_info_dict = self.get_transceiver_info()
         return transceiver_dom_info_dict.get("serial", "N/A")
 
+    def get_status(self):
+        """
+        Retrieves the operational status of the device
+        Returns:
+            A boolean value, True if device is operating properly, False if not
+        """
+        return self.get_presence() and not self.get_reset_status()
+
+    def get_position_in_parent(self):
+        """
+        Returns:
+            Temp return 0
+        """
+        return 0
+
+    def is_replaceable(self):
+        """
+        Retrieves if replaceable
+        Returns:
+            A boolean value, True if replaceable
+        """
+        return True
+
+    def get_error_description(self):
+        """
+        Get error description
+
+        Args:
+            error_code: The error code returned by _get_error_code
+
+        Returns:
+            The error description
+        """
+        if self.get_presence():
+            return self.SFP_STATUS_OK
+        else:
+            return self.SFP_STATUS_UNPLUGGED
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/thermal.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/thermal.py
index f45d930e87f5..730f5b1c6c21 100644
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/thermal.py
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/sonic_platform/thermal.py
@@ -9,6 +9,7 @@
 
 import os
 import os.path
+import subprocess
 
 try:
     from sonic_platform_base.thermal_base import ThermalBase
@@ -28,8 +29,14 @@ class Thermal(ThermalBase):
                          "/sys/bus/i2c/devices/0-004d/",
                          "/sys/bus/i2c/devices/0-004e/"]
 
+    IPMI_SENSOR_NR  = ["0x30", "0x31", "0x32", "0x33", "0x34", "0x35", "0x36"]
+
     def __init__(self, thermal_index):
         self.index = thermal_index
+        self.lnc = None
+        self.lcr = None
+        self.unc = None
+        self.ucr = None
 
         # Add thermal name
         self.THERMAL_NAME_LIST.append("Top-Rear")
@@ -40,6 +47,20 @@ def __init__(self, thermal_index):
         self.THERMAL_NAME_LIST.append("Bottom-Front")
         self.THERMAL_NAME_LIST.append("Bottom-Rear")
         ThermalBase.__init__(self)
+        self.minimum_thermal = self.get_temperature()
+        self.maximum_thermal = self.get_temperature()
+        self.__initialize_threshold()
+
+    def __initialize_threshold(self):
+        cmd = ["ipmitool", "raw", "0x4", "0x27"]
+        if self.lnc is None:
+            cmd.append(self.IPMI_SENSOR_NR[self.index])
+            p = subprocess.Popen(cmd, stdout=subprocess.PIPE)
+            out, err = p.communicate()
+            self.unc = float(int(out.split()[4],16))
+            self.ucr = float(int(out.split()[5],16))
+            self.lnc = float(int(out.split()[1],16) if int(out.split()[1],16) != 0 else 2)
+            self.lcr = float(int(out.split()[2],16))
 
     def __read_txt_file(self, file_path):
         try:
@@ -57,7 +78,7 @@ def __get_temp(self, temp_file):
         return "{:.3f}".format(temp)
 
     def __set_threshold(self, file_name, temperature):
-        temp_file_path = os.path.join(self.hwmon_path, file_name)
+        temp_file_path = os.path.join(self.SYSFS_THERMAL_DIR[self.index], file_name)
         try:
             with open(temp_file_path, 'w') as fd:
                 fd.write(str(temperature))
@@ -81,7 +102,8 @@ def get_low_threshold(self):
         :return: A float number, the low threshold temperature of thermal in Celsius
                  up to nearest thousandth of one degree Celsius, e.g. 30.125
         """
-        return int(9)
+
+        return self.lnc
 
     def get_low_critical_threshold(self):
         """
@@ -89,7 +111,8 @@ def get_low_critical_threshold(self):
         :return: A float number, the low critical threshold temperature of thermal in Celsius
                  up to nearest thousandth of one degree Celsius, e.g. 30.125
         """
-        return int(7)
+
+        return self.lcr
 
     def get_high_threshold(self):
         """
@@ -98,20 +121,8 @@ def get_high_threshold(self):
             A float number, the high threshold temperature of thermal in Celsius
             up to nearest thousandth of one degree Celsius, e.g. 30.125
         """
-        if self.index==0:
-            return int(56)
-        elif self.index==1:
-            return int(74)
-        elif self.index==2:
-            return int(55)
-        elif self.index==3:
-            return int(74)
-        elif self.index==4:
-            return int(55)
-        elif self.index==5:
-            return int(74)
-        else:
-            return int(56)
+
+        return self.unc
 
     def get_high_critical_threshold(self):
         """
@@ -119,20 +130,8 @@ def get_high_critical_threshold(self):
         :return: A float number, the high critical threshold temperature of thermal in Celsius
                  up to nearest thousandth of one degree Celsius, e.g. 30.125
         """
-        if self.index==0:
-            return int(58)
-        elif self.index==1:
-            return int(76)
-        elif self.index==2:
-            return int(57)
-        elif self.index==3:
-            return int(76)
-        elif self.index==4:
-            return int(57)
-        elif self.index==5:
-            return int(76)
-        else:
-            return int(58)
+
+        return self.ucr
 
     def get_name(self):
         """
@@ -144,12 +143,12 @@ def get_name(self):
 
     def get_presence(self):
         """
-        Retrieves the presence of the PSU
+        Retrieves the presence of the sensor
         Returns:
-            bool: True if PSU is present, False if not
+            bool: True if sensor is present, False if not
         """
         temp_file = "temp1_input"
-        temp_file_path = os.path.join(self.hwmon_path, temp_file)
+        temp_file_path = os.path.join(self.SYSFS_THERMAL_DIR[self.index], temp_file)
         return os.path.isfile(temp_file_path)
 
     def get_status(self):
@@ -163,3 +162,63 @@ def get_status(self):
 
         return True
 
+    def get_model(self):
+        """
+        Retrieves the model number (or part number) of the device
+        Returns:
+            string: Model/part number of device
+        """
+        return "None"
+
+    def get_serial(self):
+        """
+        Retrieves the serial number of the device
+        Returns:
+            string: Serial number of device
+        """
+        return "None"
+
+    def is_replaceable(self):
+        """
+        Retrieves whether thermal module is replaceable
+        Returns:
+            A boolean value, True if replaceable, False if not
+        """
+        return False
+
+    def get_position_in_parent(self):
+        """
+        Retrieves 1-based relative physical position in parent device.
+        If the agent cannot determine the parent-relative position
+        for some reason, or if the associated value of
+        entPhysicalContainedIn is'0', then the value '-1' is returned
+        Returns:
+            integer: The 1-based relative physical position in parent device
+            or -1 if cannot determine the position
+        """
+        return self.index + 1
+
+    def get_minimum_recorded(self):
+        """
+        Retrieves the minimum recorded temperature of thermal
+        Returns:
+            A float number, the minimum recorded temperature of thermal in Celsius
+            up to nearest thousandth of one degree Celsius, e.g. 30.125
+        """
+        tmp = self.get_temperature()
+        if tmp < self.minimum_thermal:
+            self.minimum_thermal = tmp
+        return self.minimum_thermal
+
+    def get_maximum_recorded(self):
+        """
+        Retrieves the maximum recorded temperature of thermal
+        Returns:
+            A float number, the maximum recorded temperature of thermal in Celsius
+            up to nearest thousandth of one degree Celsius, e.g. 30.125
+        """
+        tmp = self.get_temperature()
+        if tmp > self.maximum_thermal:
+            self.maximum_thermal = tmp
+        return self.maximum_thermal
+
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_firmware_version b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_firmware_version
new file mode 100755
index 000000000000..0ce6e8624436
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_firmware_version
@@ -0,0 +1,24 @@
+#!/bin/bash
+ver_str=$(ipmitool raw 0x30 0x23 2>>/dev/null)
+fpga_ver=$(echo $ver_str | awk '{printf $3}')
+cpld1_ver=$(echo $ver_str | awk '{printf $4}')
+cpld2_ver=$(echo $ver_str | awk '{printf $5}')
+fan_cpld_ver=$(echo $ver_str | awk '{printf $6}')
+
+cpld1_ver=$( printf "%d" 0x$cpld1_ver )
+cpld2_ver=$( printf "%d" 0x$cpld2_ver )
+fan_cpld_ver=$( printf "%d" 0x$fan_cpld_ver )
+fpga_ver=$( printf "%d" 0x$fpga_ver )
+
+cpld1_ver_path="/sys/bus/i2c/devices/0-0061/version"
+cpld2_ver_path="/sys/bus/i2c/devices/0-0062/version"
+fan_cpld_ver_path="/sys/bus/i2c/devices/0-0066/version"
+fpga_ver_path="/sys/bus/i2c/devices/0-0060/version"
+
+echo $cpld1_ver > $cpld1_ver_path
+echo $cpld2_ver > $cpld2_ver_path
+echo $fpga_ver > $fpga_ver_path
+echo $fan_cpld_ver > $fan_cpld_ver_path
+
+exit 0
+
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_led b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_led
old mode 100644
new mode 100755
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_pld b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_pld
old mode 100644
new mode 100755
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_sync b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/platform_sync
old mode 100644
new mode 100755
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-fanthrml-monitor b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-fanthrml-monitor
old mode 100644
new mode 100755
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-led-monitor b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-led-monitor
old mode 100644
new mode 100755
index ba4f4c8dae99..364ac53b1865
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-led-monitor
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-led-monitor
@@ -2,6 +2,7 @@
 
 #0=off, 1=green, 2=amber, 3=blk_green
 led_state=0
+pre_loc_state=0
 
 #$1=led_no(1=loc, 2=diag, 3=fan, 4=psu1, 5=psu2)
 bmc_led_read()
@@ -128,37 +129,10 @@ bmc_led_read()
     return 0
 }
 
-#$1=led_no(1=loc, 2=diag, 3=fan, 4=psu1, 5=psu2)
-#$2=led_val(0=off, 1=green, 2=amber, 3=blk_green)
+#$1=led_val(0=off, 1=green, 2=amber, 3=blk_green)
 bmc_led_write()
 {
-    led_val=$2
-    val=$(ipmitool raw 0x30 0x97 2>>/dev/null)
-    loc_val=$(echo $val | awk '{printf $1}')
-    diag_val=$(echo $val | awk '{printf $2}')
-    fan_val=$(echo $val | awk '{printf $3}')
-    psu1_val=$(echo $val | awk '{printf $4}')
-    psu2_val=$(echo $val | awk '{printf $5}')
-
-    loc_val=$( printf "%d" 0x$loc_val )
-    diag_val=$( printf "%d" 0x$diag_val )
-    fan_val=$( printf "%d" 0x$fan_val )
-    psu1_val=$( printf "%d" 0x$psu1_val )
-    psu2_val=$( printf "%d" 0x$psu2_val )
-
-    if [ $1 -eq 1 ];then
-        loc_val=$(($loc_val & $led_val))
-    elif [ $1 -eq 2 ];then
-        diag_val=$(($diag_val & $led_val))
-    elif [ $1 -eq 3 ];then
-        fan_val=$(($fan_val & $led_val))
-    elif [ $1 -eq 4 ];then
-        psu1_val=$(($psu1_val & $led_val))
-    else
-        psu2_val=$(($psu2_val & $led_val))
-    fi
-
-    ipmitool raw 0x30 0x96 $loc_val $diag_val $fan_val $psu1_val $psu2_val 1>>/dev/null 2>>/dev/null
+    ipmitool raw 0x30 0x2b 0x2 0xc0 0x0 0x55 0x"$1"0 1>>/dev/null 2>>/dev/null
 }
 
 LED_monitor()
@@ -171,7 +145,13 @@ LED_monitor()
     do
         if [ -e /sys/bus/i2c/devices/0-0060/sys_led_diag ];then
             loc_state=$(cat /sys/bus/i2c/devices/0-0060/sys_led_loc | awk '{printf $1}')
-            bmc_led_write 1 $loc_state
+			if [ $loc_state -gt 4 ]; then
+				loc_state=4
+			fi
+			if [ $loc_state != $pre_loc_state ]; then
+				bmc_led_write $loc_state
+				pre_loc_state=$loc_state
+			fi
 
             bmc_led_read 2
             if [ $? -eq 1 ];then
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-psu-monitor b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-psu-monitor
old mode 100644
new mode 100755
index bcb3502e4a7c..d5cfd719344b
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-psu-monitor
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-psu-monitor
@@ -85,61 +85,73 @@ get_PSU_information()
 	    #PSU1 Vin
 	    add_byte 1 2
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 10))
 	            echo $Value > /sys/bus/i2c/devices/0-005a/psu_v_in
 	    fi
 	    #PSU2 Vin
 	    add_byte 3 4
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 10))
 	            echo $Value > /sys/bus/i2c/devices/0-0059/psu_v_in
 	    fi
 	    #PSU 1 Vout
 	    add_byte 5 6
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 10))
 	            echo $Value > /sys/bus/i2c/devices/0-005a/psu_v_out
 	    fi
 	    #PSU 2 Vout
 	    add_byte 7 8
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 10))
 	            echo $Value > /sys/bus/i2c/devices/0-0059/psu_v_out
 	    fi
 	    #PSU 1 Iin
 	    add_byte 9 10
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 10))
 	            echo $Value > /sys/bus/i2c/devices/0-005a/psu_i_in
 	    fi
 	    #PSU 2 Iin
 	    add_byte 11 12
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 10))
 	            echo $Value > /sys/bus/i2c/devices/0-0059/psu_i_in
 	    fi
 	    #PSU 1 Iout
 	    add_byte 13 14
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 10))
 	            echo $Value > /sys/bus/i2c/devices/0-005a/psu_i_out
 	    fi
 	    #PSU 2 Iout
 	    add_byte 15 16
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 10))
 	            echo $Value > /sys/bus/i2c/devices/0-0059/psu_i_out
 	    fi
 	    #PSU 1 Pin
 	    add_byte 17 18
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 1000000))
 	            echo $Value > /sys/bus/i2c/devices/0-005a/psu_p_in
 	    fi
 	    #PSU 2 Pin
 	    add_byte 19 20
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 1000000))
 	            echo $Value > /sys/bus/i2c/devices/0-0059/psu_p_in
 	    fi
 	    #PSU 1 Pout
 	    add_byte 21 22
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 1000000))
 	            echo $Value > /sys/bus/i2c/devices/0-005a/psu_p_out
 	    fi
 	    #PSU 2 Pout
 	    add_byte 23 24
 	    if [ $? -eq 1 ];then
+			    Value=$((Value * 1000000))
 	            echo $Value > /sys/bus/i2c/devices/0-0059/psu_p_out
 	    fi
 	    #PSU 1 Fan speed
@@ -156,9 +168,11 @@ get_PSU_information()
 #----------------93->/58/59----psu_fan1_fault psu_temp1_input psu_fan1_duty_cycle
 	    #PSU 1 Temp1
 	    byte_read 25
+	    Value=$((Value * 1000))
 	    echo $Value > /sys/bus/i2c/devices/0-005a/psu_temp1_input
 	    #PSU 2 Temp1
 	    byte_read 26
+	    Value=$((Value * 1000))
 	    echo $Value > /sys/bus/i2c/devices/0-0059/psu_temp1_input
 	    if [ $debug_flag -eq 0 ];then
 	        #PSU 1 Fan command
@@ -314,8 +328,8 @@ PSU_monitor()
 {
 
     while true
-    do	
-    	
+    do
+
         get_PSU_information
         if [ $debug_flag -eq 1 ];then
            bmc_fan_speed_ctrl
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-qsfp-monitor b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sonic-qsfp-monitor
old mode 100644
new mode 100755
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sw_to3200k_watchdog.sh b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sw_to3200k_watchdog.sh
new file mode 100755
index 000000000000..082c3497cdc8
--- /dev/null
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/sw_to3200k_watchdog.sh
@@ -0,0 +1,5 @@
+#! /bin/bash
+
+#we don't have watchdog design in SW3200K so always return OK to skip
+
+exit 0
diff --git a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/wistron_sw_to3200k_util.py b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/wistron_sw_to3200k_util.py
old mode 100644
new mode 100755
index 46121e6e7eed..c7b65e16e2c4
--- a/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/wistron_sw_to3200k_util.py
+++ b/platform/innovium/sonic-platform-modules-wistron/sw-to3200k/utils/wistron_sw_to3200k_util.py
@@ -229,6 +229,18 @@ def device_install():
             print(output)
             if FORCE == 0:
                 return status
+
+    status, output = log_os_system("cp /usr/share/sonic/device/x86_64-wistron_sw_to3200k-r0/smartd.conf /etc/;systemctl restart smartd.service", 1)
+    if status:
+        print(output)
+        if FORCE == 0:
+            return status
+
+    status, output = log_os_system("cp /usr/share/sonic/device/x86_64-wistron_sw_to3200k-r0/watchdog-control.service /usr/lib/systemd/system/", 1)
+    if status:
+        print(output)
+        if FORCE == 0:
+            return status
     return
 
 def device_uninstall():
@@ -284,12 +296,6 @@ def do_install():
     else:
         print(PROJECT_NAME.upper()+" devices detected....")
 
-    status, output = log_os_system(
-        "/bin/sh /usr/local/bin/platform_api_mgnt.sh init", 1)
-    if status:
-            print(output)
-            if FORCE == 0:
-                return status
     return
 
 def do_uninstall():