From 4a918efbbd8b4f42514ee9df9ddc3ff175042760 Mon Sep 17 00:00:00 2001 From: fengkm Date: Tue, 20 Nov 2018 17:36:19 +0800 Subject: [PATCH 1/3] remove nephos sonic-platform-modules-ingrasys module --- .gitmodules | 3 --- platform/nephos/sonic-platform-modules-ingrasys | 1 - 2 files changed, 4 deletions(-) delete mode 160000 platform/nephos/sonic-platform-modules-ingrasys diff --git a/.gitmodules b/.gitmodules index 79905318f822..2b133be632a8 100644 --- a/.gitmodules +++ b/.gitmodules @@ -53,9 +53,6 @@ [submodule "platform/p4/SAI-P4-BM"] path = platform/p4/SAI-P4-BM url = https://github.com/Mellanox/SAI-P4-BM.git -[submodule "platform/nephos/sonic-platform-modules-ingrasys"] - path = platform/nephos/sonic-platform-modules-ingrasys - url = https://github.com/Ingrasys-sonic/sonic-platform-modules-ingrasys-nephos.git [submodule "platform/barefoot/sonic-platform-modules-arista"] path = platform/barefoot/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic diff --git a/platform/nephos/sonic-platform-modules-ingrasys b/platform/nephos/sonic-platform-modules-ingrasys deleted file mode 160000 index 796169e43aee..000000000000 --- a/platform/nephos/sonic-platform-modules-ingrasys +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 796169e43aee944fdf7b549d04cb181117e0fb89 From d0426f51503900d6cda658ece76c07056b7b88a6 Mon Sep 17 00:00:00 2001 From: fengkm Date: Tue, 20 Nov 2018 18:18:19 +0800 Subject: [PATCH 2/3] [Ingrasys]Add platform drivers and device to support Debian Stretch --- .../plugins/sfputil.py | 28 + .../th-s8900-48x25G+6x100G.config.bcm | 11 +- .../plugins/sfputil.py | 182 +- .../th-s8900-48x25G+16x100G.config.bcm | 374 ++-- .../plugins/sfputil.py | 242 ++- .../plugins/sfputil.py | 30 + .../plugins/psuutil.py | 21 +- .../plugins/sfputil.py | 246 ++- .../INGRASYS-S9200-64X/port_config.ini | 98 +- .../INGRASYS-S9200-64X/sai.profile | 2 +- .../th2-s9200-64x100G.config.bcm | 873 ++++++++ .../x86_64-ingrasys_s9200_64x-r0/fancontrol | 4 +- .../x86_64-ingrasys_s9200_64x-r0/sensors.conf | 8 +- .../x86_64-ingrasys_s9280_64x-r0/fancontrol | 2 +- .../x86_64-ingrasys_s9280_64x-r0/sensors.conf | 10 +- platform/barefoot/bfn-platform-ingrasys.mk | 2 +- .../s9180-32x/utils/i2c_utils.sh | 374 +++- .../s9280-64x/utils/i2c_utils.sh | 116 +- .../debian/rules | 76 +- .../sonic-platform-ingrasys-s8810-32q.dirs | 3 - .../sonic-platform-ingrasys-s8810-32q.init | 41 + .../sonic-platform-ingrasys-s8810-32q.install | 3 - ...sonic-platform-ingrasys-s8810-32q.postinst | 43 - .../sonic-platform-ingrasys-s8810-32q.postrm | 38 - .../sonic-platform-ingrasys-s8810-32q.prerm | 17 - .../sonic-platform-ingrasys-s8810-32q.upstart | 6 - .../sonic-platform-ingrasys-s8900-54xc.dirs | 3 - .../sonic-platform-ingrasys-s8900-54xc.init | 41 + ...sonic-platform-ingrasys-s8900-54xc.install | 3 - ...onic-platform-ingrasys-s8900-54xc.postinst | 43 - .../sonic-platform-ingrasys-s8900-54xc.postrm | 38 - .../sonic-platform-ingrasys-s8900-54xc.prerm | 17 - ...sonic-platform-ingrasys-s8900-54xc.upstart | 6 - .../sonic-platform-ingrasys-s8900-64xc.dirs | 3 - .../sonic-platform-ingrasys-s8900-64xc.init | 41 + ...sonic-platform-ingrasys-s8900-64xc.install | 3 - ...onic-platform-ingrasys-s8900-64xc.postinst | 42 - .../sonic-platform-ingrasys-s8900-64xc.postrm | 38 - .../sonic-platform-ingrasys-s8900-64xc.prerm | 15 - ...sonic-platform-ingrasys-s8900-64xc.upstart | 6 - .../debian/sonic-platform-ingrasys-s9100.dirs | 3 - .../debian/sonic-platform-ingrasys-s9100.init | 41 + .../sonic-platform-ingrasys-s9100.install | 3 - .../sonic-platform-ingrasys-s9100.postinst | 43 - .../sonic-platform-ingrasys-s9100.postrm | 38 - .../sonic-platform-ingrasys-s9100.prerm | 17 - .../sonic-platform-ingrasys-s9100.upstart | 6 - .../sonic-platform-ingrasys-s9200-64x.dirs | 3 - .../sonic-platform-ingrasys-s9200-64x.init | 41 + .../sonic-platform-ingrasys-s9200-64x.install | 3 - ...sonic-platform-ingrasys-s9200-64x.postinst | 43 - .../sonic-platform-ingrasys-s9200-64x.postrm | 38 - .../sonic-platform-ingrasys-s9200-64x.prerm | 17 - .../sonic-platform-ingrasys-s9200-64x.upstart | 6 - .../s8810-32q/utils/i2c_utils.sh | 93 +- .../s8900-54xc/utils/i2c_utils.sh | 512 +++-- .../s8900-64xc/utils/i2c_utils.sh | 20 +- .../s9100/utils/i2c_utils.sh | 787 +++---- .../s9200-64x/utils/i2c_utils.sh | 99 +- .../.gitignore | 52 + .../sonic-platform-modules-ingrasys/LICENSE | 674 ++++++ .../debian/changelog | 11 + .../debian/compat | 1 + .../debian/control | 15 + .../debian/rules | 42 + .../sonic-platform-ingrasys-s9130-32x.init | 41 + .../sonic-platform-ingrasys-s9230-64x.init | 41 + .../s9130-32x/README.md | 167 ++ .../s9130-32x/modules/Makefile | 2 + .../s9130-32x/modules/eeprom_mb.c | 267 +++ .../modules/ingrasys_s9130_32x_platform.h | 148 ++ .../modules/ingrasys_s9130_32x_psu.c | 388 ++++ .../s9130-32x/service/qsfp-monitor.service | 15 + .../service/s9130-32x-monitor.service | 19 + .../s9130-32x/utils/i2c_utils.sh | 1732 +++++++++++++++ .../s9130-32x/utils/qsfp_monitor.sh | 104 + .../s9130-32x/utils/s9130_32x_monitor.sh | 39 + .../s9230-64x/README.md | 182 ++ .../s9230-64x/modules/Makefile | 3 + .../s9230-64x/modules/eeprom_mb.c | 267 +++ .../modules/ingrasys_s9230_64x_i2c_cpld.c | 1259 +++++++++++ .../modules/ingrasys_s9230_64x_i2c_cpld.h | 223 ++ .../modules/ingrasys_s9230_64x_platform.h | 148 ++ .../modules/ingrasys_s9230_64x_psu.c | 388 ++++ .../s9230-64x/service/qsfp-monitor.service | 15 + .../service/s9230-64x-monitor.service | 19 + .../s9230-64x/utils/i2c_utils.sh | 1850 +++++++++++++++++ .../s9230-64x/utils/qsfp_monitor.sh | 105 + .../s9230-64x/utils/s9230_64x_monitor.sh | 39 + 89 files changed, 11362 insertions(+), 1856 deletions(-) create mode 100644 device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/th2-s9200-64x100G.config.bcm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.init delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.install delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postinst delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postrm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.prerm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.upstart delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.init delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.install delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postinst delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postrm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.prerm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.upstart delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.init delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.install delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postinst delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postrm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.prerm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.upstart delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.init delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.install delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postinst delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postrm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.prerm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.upstart delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.init delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.install delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postinst delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postrm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.prerm delete mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.upstart create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/.gitignore create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/LICENSE create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/debian/changelog create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/debian/compat create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/debian/control create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/debian/rules create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9130-32x.init create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9230-64x.init create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/README.md create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/Makefile create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/eeprom_mb.c create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/ingrasys_s9130_32x_platform.h create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/ingrasys_s9130_32x_psu.c create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/service/qsfp-monitor.service create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/service/s9130-32x-monitor.service create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/i2c_utils.sh create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/qsfp_monitor.sh create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/s9130_32x_monitor.sh create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/README.md create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/Makefile create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/eeprom_mb.c create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_i2c_cpld.c create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_i2c_cpld.h create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_platform.h create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_psu.c create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/service/qsfp-monitor.service create mode 100644 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/service/s9230-64x-monitor.service create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/i2c_utils.sh create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/qsfp_monitor.sh create mode 100755 platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/s9230_64x_monitor.sh diff --git a/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/plugins/sfputil.py b/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/plugins/sfputil.py index f146b0e442ac..8d195f644e18 100644 --- a/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/plugins/sfputil.py +++ b/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/plugins/sfputil.py @@ -3,6 +3,8 @@ # Platform-specific SFP transceiver interface for SONiC # +import os + try: import time from sonic_sfp.sfputilbase import SfpUtilBase @@ -23,6 +25,7 @@ class SfpUtil(SfpUtilBase): #INT_GPIO_BASE = 192 LP_GPIO_BASE = 160 RST_GPIO_BASE = 128 + GPIO_OFFSET = 0 BASE_DIR_PATH = "/sys/class/gpio/gpio{0}/direction" BASE_VAL_PATH = "/sys/class/gpio/gpio{0}/value" @@ -45,7 +48,32 @@ def qsfp_ports(self): def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping + def set_gpio_offset(self): + sys_gpio_dir = "/sys/class/gpio" + self.GPIO_OFFSET = 0 + gpiochip_no = 0 + for d in os.listdir(sys_gpio_dir): + if "gpiochip" in d: + try: + gpiochip_no = int(d[8:],10) + except ValueError as e: + print "Error: %s" % str(e) + if gpiochip_no > 255: + self.GPIO_OFFSET=256 + return True + return True + + def update_gpio_base(self): + self.ABS_GPIO_BASE = 224 + self.GPIO_OFFSET + self.LP_GPIO_BASE = 160 + self.GPIO_OFFSET + self.RST_GPIO_BASE = 128 + self.GPIO_OFFSET + return True + def __init__(self): + # Update abs, lpmode, and reset gpio base + self.set_gpio_offset() + self.update_gpio_base() + # Override port_to_eeprom_mapping for class initialization eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" diff --git a/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm index 8440176b200a..4485a77af2d6 100644 --- a/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm +++ b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm @@ -1,12 +1,17 @@ -#2017/05/31 +#2018/03/31 os=unix oversubscribe_mode=1 pbmp_xport_xe=0x7f00001fff4003ffffc0001fffe -lpm_scaling_enable=1 -lpm_ipv6_128b_reserved=0 +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +l3_mem_entries=40960 +l2_mem_entries=40960 + +l2xmsg_mode=1 +mmu_lossless=0 #Parity parity_correction=1 diff --git a/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/plugins/sfputil.py b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/plugins/sfputil.py index 5c0f4362ace4..586e6e189743 100644 --- a/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/plugins/sfputil.py +++ b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/plugins/sfputil.py @@ -3,6 +3,8 @@ # Platform-specific SFP transceiver interface for SONiC # +import os + try: import time from sonic_sfp.sfputilbase import SfpUtilBase @@ -17,6 +19,7 @@ class SfpUtil(SfpUtilBase): PORT_END = 53 QSFP_PORT_START = 48 PORTS_IN_BLOCK = 54 + GPIO_OFFSET = 0 BASE_DIR_PATH = "/sys/class/gpio/gpio{0}/direction" BASE_VAL_PATH = "/sys/class/gpio/gpio{0}/value" @@ -79,80 +82,9 @@ class SfpUtil(SfpUtilBase): 53: 71 } - abs_to_gpio_mapping = { - 0: 192, - 1: 193, - 2: 194, - 3: 195, - 4: 196, - 5: 197, - 6: 198, - 7: 199, - 8: 200, - 9: 201, - 10: 202, - 11: 203, - 12: 204, - 13: 205, - 14: 206, - 15: 207, - 16: 176, - 17: 177, - 18: 178, - 19: 179, - 20: 180, - 21: 181, - 22: 182, - 23: 183, - 24: 184, - 25: 185, - 26: 186, - 27: 187, - 28: 188, - 29: 189, - 30: 190, - 31: 191, - 32: 160, - 33: 161, - 34: 162, - 35: 163, - 36: 164, - 37: 165, - 38: 166, - 39: 167, - 40: 168, - 41: 169, - 42: 170, - 43: 171, - 44: 172, - 45: 173, - 46: 174, - 47: 175, - 48: 240, - 49: 241, - 50: 242, - 51: 243, - 52: 244, - 53: 245 - } - - lpmode_to_gpio_mapping = { - 48: 224, - 49: 225, - 50: 226, - 51: 227, - 52: 228, - 53: 229 - } - - reset_to_gpio_mapping = { - 48: 208, - 49: 209, - 50: 210, - 51: 211, - 52: 212, - 53: 213 - } + abs_to_gpio_mapping = {} + lpmode_to_gpio_mapping = {} + reset_to_gpio_mapping = {} @property def port_start(self): @@ -174,7 +106,109 @@ def qsfp_ports(self): def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping + def set_gpio_offset(self): + sys_gpio_dir = "/sys/class/gpio" + self.GPIO_OFFSET = 0 + gpiochip_no = 0 + for d in os.listdir(sys_gpio_dir): + if "gpiochip" in d: + try: + gpiochip_no = int(d[8:],10) + except ValueError as e: + print "Error: %s" % str(e) + if gpiochip_no > 255: + self.GPIO_OFFSET=256 + return True + return True + + def init_abs_to_gpio_mapping(self): + self.abs_to_gpio_mapping = { + 0: 192+self.GPIO_OFFSET, + 1: 193+self.GPIO_OFFSET, + 2: 194+self.GPIO_OFFSET, + 3: 195+self.GPIO_OFFSET, + 4: 196+self.GPIO_OFFSET, + 5: 197+self.GPIO_OFFSET, + 6: 198+self.GPIO_OFFSET, + 7: 199+self.GPIO_OFFSET, + 8: 200+self.GPIO_OFFSET, + 9: 201+self.GPIO_OFFSET, + 10: 202+self.GPIO_OFFSET, + 11: 203+self.GPIO_OFFSET, + 12: 204+self.GPIO_OFFSET, + 13: 205+self.GPIO_OFFSET, + 14: 206+self.GPIO_OFFSET, + 15: 207+self.GPIO_OFFSET, + 16: 176+self.GPIO_OFFSET, + 17: 177+self.GPIO_OFFSET, + 18: 178+self.GPIO_OFFSET, + 19: 179+self.GPIO_OFFSET, + 20: 180+self.GPIO_OFFSET, + 21: 181+self.GPIO_OFFSET, + 22: 182+self.GPIO_OFFSET, + 23: 183+self.GPIO_OFFSET, + 24: 184+self.GPIO_OFFSET, + 25: 185+self.GPIO_OFFSET, + 26: 186+self.GPIO_OFFSET, + 27: 187+self.GPIO_OFFSET, + 28: 188+self.GPIO_OFFSET, + 29: 189+self.GPIO_OFFSET, + 30: 190+self.GPIO_OFFSET, + 31: 191+self.GPIO_OFFSET, + 32: 160+self.GPIO_OFFSET, + 33: 161+self.GPIO_OFFSET, + 34: 162+self.GPIO_OFFSET, + 35: 163+self.GPIO_OFFSET, + 36: 164+self.GPIO_OFFSET, + 37: 165+self.GPIO_OFFSET, + 38: 166+self.GPIO_OFFSET, + 39: 167+self.GPIO_OFFSET, + 40: 168+self.GPIO_OFFSET, + 41: 169+self.GPIO_OFFSET, + 42: 170+self.GPIO_OFFSET, + 43: 171+self.GPIO_OFFSET, + 44: 172+self.GPIO_OFFSET, + 45: 173+self.GPIO_OFFSET, + 46: 174+self.GPIO_OFFSET, + 47: 175+self.GPIO_OFFSET, + 48: 240+self.GPIO_OFFSET, + 49: 241+self.GPIO_OFFSET, + 50: 242+self.GPIO_OFFSET, + 51: 243+self.GPIO_OFFSET, + 52: 244+self.GPIO_OFFSET, + 53: 245+self.GPIO_OFFSET + } + return True + + def init_lpmode_to_gpio_mapping(self): + self.lpmode_to_gpio_mapping = { + 48: 224+self.GPIO_OFFSET, + 49: 225+self.GPIO_OFFSET, + 50: 226+self.GPIO_OFFSET, + 51: 227+self.GPIO_OFFSET, + 52: 228+self.GPIO_OFFSET, + 53: 229+self.GPIO_OFFSET + } + return True + + def init_reset_to_gpio_mapping(self): + self.reset_to_gpio_mapping = { + 48: 208+self.GPIO_OFFSET, + 49: 209+self.GPIO_OFFSET, + 50: 210+self.GPIO_OFFSET, + 51: 211+self.GPIO_OFFSET, + 52: 212+self.GPIO_OFFSET, + 53: 213+self.GPIO_OFFSET + } + return True + def __init__(self): + # Init abs, lpmode, and reset to gpio mapping + self.set_gpio_offset() + self.init_abs_to_gpio_mapping() + self.init_lpmode_to_gpio_mapping() + self.init_reset_to_gpio_mapping() + # Override port_to_eeprom_mapping for class initialization eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" diff --git a/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm index 562e584012d5..f30d4ea6dd34 100644 --- a/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm +++ b/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm @@ -1,12 +1,17 @@ -#2017/05/31 +#2018/03/31 os=unix oversubscribe_mode=1 -pbmp_xport_xe=0x3d000000ff4003ffffdfffffffe +pbmp_xport_xe=0x3c000000ff0003ffffdfffffffe -lpm_scaling_enable=1 -lpm_ipv6_128b_reserved=0 +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +l3_mem_entries=40960 +l2_mem_entries=40960 + +l2xmsg_mode=1 +mmu_lossless=0 #Parity parity_correction=1 @@ -85,362 +90,359 @@ portmap_104=105:100 portmap_105=109:100 -portmap_66=129:10 -portmap_100=131:10 - portmap_33=132:10 portmap_67=133:10 portmap_101=134:10 portmap_135=135:10 -serdes_driver_current_xe0=0x9 -serdes_preemphasis_xe0=0x304000 +serdes_driver_current_xe0=0xf +serdes_preemphasis_xe0=0x003c14 serdes_if_type_xe0=14 -serdes_driver_current_xe1=0x9 -serdes_preemphasis_xe1=0x304000 +serdes_driver_current_xe1=0xf +serdes_preemphasis_xe1=0x003c1c serdes_if_type_xe1=14 -serdes_driver_current_xe2=0x9 -serdes_preemphasis_xe2=0x304000 +serdes_driver_current_xe2=0xf +serdes_preemphasis_xe2=0x003c08 serdes_if_type_xe2=14 -serdes_driver_current_xe3=0x9 -serdes_preemphasis_xe3=0x2c4400 +serdes_driver_current_xe3=0xf +serdes_preemphasis_xe3=0x003c08 serdes_if_type_xe3=14 -serdes_driver_current_xe4=0x9 -serdes_preemphasis_xe4=0x304000 +serdes_driver_current_xe4=0xf +serdes_preemphasis_xe4=0x003c08 serdes_if_type_xe4=14 -serdes_driver_current_xe5=0x9 -serdes_preemphasis_xe5=0x304000 +serdes_driver_current_xe5=0xf +serdes_preemphasis_xe5=0x003c10 serdes_if_type_xe5=14 -serdes_driver_current_xe6=0x9 -serdes_preemphasis_xe6=0x2c4400 +serdes_driver_current_xe6=0xf +serdes_preemphasis_xe6=0x083c08 serdes_if_type_xe6=14 -serdes_driver_current_xe7=0x9 -serdes_preemphasis_xe7=0x2C4400 +serdes_driver_current_xe7=0xf +serdes_preemphasis_xe7=0x043c10 serdes_if_type_xe7=14 serdes_driver_current_xe8=0x9 -serdes_preemphasis_xe8=0x2c4400 +serdes_preemphasis_xe8=0x003c08 serdes_if_type_xe8=14 serdes_driver_current_xe9=0x9 -serdes_preemphasis_xe9=0x284800 +serdes_preemphasis_xe9=0x003c08 serdes_if_type_xe9=14 serdes_driver_current_xe10=0x9 -serdes_preemphasis_xe10=0x2C4400 +serdes_preemphasis_xe10=0x003c08 serdes_if_type_xe10=14 serdes_driver_current_xe11=0x9 -serdes_preemphasis_xe11=0x2c4400 +serdes_preemphasis_xe11=0x003c08 serdes_if_type_xe11=14 serdes_driver_current_xe12=0x9 -serdes_preemphasis_xe12=0x2c4400 +serdes_preemphasis_xe12=0x2c4408 serdes_if_type_xe12=14 serdes_driver_current_xe13=0x9 -serdes_preemphasis_xe13=0x2c4400 +serdes_preemphasis_xe13=0x003c08 serdes_if_type_xe13=14 serdes_driver_current_xe14=0x9 -serdes_preemphasis_xe14=0x2c4400 +serdes_preemphasis_xe14=0x003c08 serdes_if_type_xe14=14 serdes_driver_current_xe15=0x9 -serdes_preemphasis_xe15=0x2c4400 +serdes_preemphasis_xe15=0x003c08 serdes_if_type_xe15=14 -serdes_driver_current_xe16=0x9 -serdes_preemphasis_xe16=0x2c4400 +serdes_driver_current_xe16=0xb +serdes_preemphasis_xe16=0x0c3c08 serdes_if_type_xe16=14 -serdes_driver_current_xe17=0xB -serdes_preemphasis_xe17=0x304000 +serdes_driver_current_xe17=0xb +serdes_preemphasis_xe17=0x0c3c10 serdes_if_type_xe17=14 -serdes_driver_current_xe18=0xA -serdes_preemphasis_xe18=0x2C4400 +serdes_driver_current_xe18=0xa +serdes_preemphasis_xe18=0x083c08 serdes_if_type_xe18=14 serdes_driver_current_xe19=0x9 -serdes_preemphasis_xe19=0x2C4400 +serdes_preemphasis_xe19=0x0c3c10 serdes_if_type_xe19=14 -serdes_driver_current_xe20=0xA -serdes_preemphasis_xe20=0x304000 +serdes_driver_current_xe20=0xc +serdes_preemphasis_xe20=0x043c08 serdes_if_type_xe20=14 serdes_driver_current_xe21=0x9 -serdes_preemphasis_xe21=0x2C4400 +serdes_preemphasis_xe21=0x083c08 serdes_if_type_xe21=14 -serdes_driver_current_xe22=0x9 -serdes_preemphasis_xe22=0x2C4400 +serdes_driver_current_xe22=0xc +serdes_preemphasis_xe22=0x083c08 serdes_if_type_xe22=14 -serdes_driver_current_xe23=0xC -serdes_preemphasis_xe23=0x304000 +serdes_driver_current_xe23=0xa +serdes_preemphasis_xe23=0x083c10 serdes_if_type_xe23=14 -serdes_driver_current_xe24=0xF -serdes_preemphasis_xe24=0x005100 +serdes_driver_current_xe24=0x9 +serdes_preemphasis_xe24=0x083c08 serdes_if_type_xe24=14 serdes_driver_current_xe25=0x9 -serdes_preemphasis_xe25=0x2C4400 +serdes_preemphasis_xe25=0x043c08 serdes_if_type_xe25=14 serdes_driver_current_xe26=0x9 -serdes_preemphasis_xe26=0x304000 +serdes_preemphasis_xe26=0x003c08 serdes_if_type_xe26=14 -serdes_driver_current_xe27=0x9 -serdes_preemphasis_xe27=0x304000 +serdes_driver_current_xe27=0xc +serdes_preemphasis_xe27=0x083c08 serdes_if_type_xe27=14 -serdes_driver_current_xe28=0xA -serdes_preemphasis_xe28=0x2C4400 +serdes_driver_current_xe28=0xa +serdes_preemphasis_xe28=0x003c10 serdes_if_type_xe28=14 serdes_driver_current_xe29=0x9 -serdes_preemphasis_xe29=0x284800 +serdes_preemphasis_xe29=0x043c10 serdes_if_type_xe29=14 serdes_driver_current_xe30=0x9 -serdes_preemphasis_xe30=0x2C4400 +serdes_preemphasis_xe30=0x003c14 serdes_if_type_xe30=14 -serdes_driver_current_xe31=0xA -serdes_preemphasis_xe31=0x2C4400 +serdes_driver_current_xe31=0xa +serdes_preemphasis_xe31=0x003c14 serdes_if_type_xe31=14 serdes_driver_current_xe32=0x9 -serdes_preemphasis_xe32=0x284800 +serdes_preemphasis_xe32=0x003c08 serdes_if_type_xe32=14 serdes_driver_current_xe33=0x7 -serdes_preemphasis_xe33=0x284800 +serdes_preemphasis_xe33=0x003c08 serdes_if_type_xe33=14 serdes_driver_current_xe34=0x9 -serdes_preemphasis_xe34=0x284800 +serdes_preemphasis_xe34=0x003c08 serdes_if_type_xe34=14 serdes_driver_current_xe35=0x9 -serdes_preemphasis_xe35=0x284800 +serdes_preemphasis_xe35=0x003c08 serdes_if_type_xe35=14 serdes_driver_current_xe36=0x9 -serdes_preemphasis_xe36=0x284800 +serdes_preemphasis_xe36=0x003c08 serdes_if_type_xe36=14 serdes_driver_current_xe37=0x9 -serdes_preemphasis_xe37=0x284800 +serdes_preemphasis_xe37=0x003c0c serdes_if_type_xe37=14 serdes_driver_current_xe38=0x9 -serdes_preemphasis_xe38=0x2C4400 +serdes_preemphasis_xe38=0x003c08 serdes_if_type_xe38=14 serdes_driver_current_xe39=0x9 -serdes_preemphasis_xe39=0x284800 +serdes_preemphasis_xe39=0x003c08 serdes_if_type_xe39=14 -serdes_driver_current_xe40=0xA -serdes_preemphasis_xe40=0x284800 +serdes_driver_current_xe40=0xa +serdes_preemphasis_xe40=0x003c10 serdes_if_type_xe40=14 serdes_driver_current_xe41=0x9 -serdes_preemphasis_xe41=0x2C4400 +serdes_preemphasis_xe41=0x003c10 serdes_if_type_xe41=14 -serdes_driver_current_xe42=0x9 -serdes_preemphasis_xe42=0x2C4400 +serdes_driver_current_xe42=0xc +serdes_preemphasis_xe42=0x083c08 serdes_if_type_xe42=14 -serdes_driver_current_xe43=0xA -serdes_preemphasis_xe43=0x2E4200 +serdes_driver_current_xe43=0xa +serdes_preemphasis_xe43=0x003c10 serdes_if_type_xe43=14 -serdes_driver_current_xe44=0xA -serdes_preemphasis_xe44=0x2E4200 +serdes_driver_current_xe44=0xa +serdes_preemphasis_xe44=0x003c08 serdes_if_type_xe44=14 -serdes_driver_current_xe45=0xA -serdes_preemphasis_xe45=0x2C4400 +serdes_driver_current_xe45=0x9 +serdes_preemphasis_xe45=0x003c10 serdes_if_type_xe45=14 serdes_driver_current_xe46=0x9 -serdes_preemphasis_xe46=0x2C4400 +serdes_preemphasis_xe46=0x043c08 serdes_if_type_xe46=14 -serdes_driver_current_xe47=0x9 -serdes_preemphasis_xe47=0x2C4400 +serdes_driver_current_xe47=0xa +serdes_preemphasis_xe47=0x003c08 serdes_if_type_xe47=14 serdes_driver_current_lane0_ce0=0x9 -serdes_driver_current_lane1_ce0=0xF +serdes_driver_current_lane1_ce0=0xf serdes_driver_current_lane2_ce0=0x9 serdes_driver_current_lane3_ce0=0x9 -serdes_preemphasis_lane0_ce0=0x2C4400 -serdes_preemphasis_lane1_ce0=0x343C00 -serdes_preemphasis_lane2_ce0=0x2C4400 -serdes_preemphasis_lane3_ce0=0x2C4400 +serdes_preemphasis_lane0_ce0=0x003c08 +serdes_preemphasis_lane1_ce0=0x003c08 +serdes_preemphasis_lane2_ce0=0x003c08 +serdes_preemphasis_lane3_ce0=0x003c08 serdes_if_type_ce0=14 serdes_driver_current_lane0_ce1=0x9 serdes_driver_current_lane1_ce1=0x9 serdes_driver_current_lane2_ce1=0x9 -serdes_driver_current_lane3_ce1=0xE -serdes_preemphasis_lane0_ce1=0x284800 -serdes_preemphasis_lane1_ce1=0x284800 -serdes_preemphasis_lane2_ce1=0x2C4400 -serdes_preemphasis_lane3_ce1=0x2C4400 +serdes_driver_current_lane3_ce1=0xe +serdes_preemphasis_lane0_ce1=0x003c08 +serdes_preemphasis_lane1_ce1=0x003c08 +serdes_preemphasis_lane2_ce1=0x003c08 +serdes_preemphasis_lane3_ce1=0x003c08 serdes_if_type_ce1=14 serdes_driver_current_lane0_ce2=0x9 -serdes_driver_current_lane1_ce2=0xF +serdes_driver_current_lane1_ce2=0xf serdes_driver_current_lane2_ce2=0x9 -serdes_driver_current_lane3_ce2=0xD -serdes_preemphasis_lane0_ce2=0x284800 -serdes_preemphasis_lane1_ce2=0x343C00 -serdes_preemphasis_lane2_ce2=0x284800 -serdes_preemphasis_lane3_ce2=0x304000 +serdes_driver_current_lane3_ce2=0xd +serdes_preemphasis_lane0_ce2=0x003c08 +serdes_preemphasis_lane1_ce2=0x003c08 +serdes_preemphasis_lane2_ce2=0x003c08 +serdes_preemphasis_lane3_ce2=0x003c08 serdes_if_type_ce2=14 serdes_driver_current_lane0_ce3=0x9 -serdes_driver_current_lane1_ce3=0xD +serdes_driver_current_lane1_ce3=0xd serdes_driver_current_lane2_ce3=0x9 -serdes_driver_current_lane3_ce3=0xD -serdes_preemphasis_lane0_ce3=0x2C4400 -serdes_preemphasis_lane1_ce3=0x304000 -serdes_preemphasis_lane2_ce3=0x2C4400 -serdes_preemphasis_lane3_ce3=0x304000 +serdes_driver_current_lane3_ce3=0xd +serdes_preemphasis_lane0_ce3=0x003c08 +serdes_preemphasis_lane1_ce3=0x003c08 +serdes_preemphasis_lane2_ce3=0x003c08 +serdes_preemphasis_lane3_ce3=0x003c08 serdes_if_type_ce3=14 serdes_driver_current_lane0_ce4=0x9 serdes_driver_current_lane1_ce4=0x9 serdes_driver_current_lane2_ce4=0x9 -serdes_driver_current_lane3_ce4=0xD -serdes_preemphasis_lane0_ce4=0x2C4400 -serdes_preemphasis_lane1_ce4=0x2C4400 -serdes_preemphasis_lane2_ce4=0x2C4400 -serdes_preemphasis_lane3_ce4=0x304000 +serdes_driver_current_lane3_ce4=0xd +serdes_preemphasis_lane0_ce4=0x003c08 +serdes_preemphasis_lane1_ce4=0x003c08 +serdes_preemphasis_lane2_ce4=0x003c08 +serdes_preemphasis_lane3_ce4=0x003c08 serdes_if_type_ce4=14 serdes_driver_current_lane0_ce5=0x9 -serdes_driver_current_lane1_ce5=0xF +serdes_driver_current_lane1_ce5=0xf serdes_driver_current_lane2_ce5=0x9 serdes_driver_current_lane3_ce5=0x9 -serdes_preemphasis_lane0_ce5=0x2C4400 -serdes_preemphasis_lane1_ce5=0x383800 -serdes_preemphasis_lane2_ce5=0x2C4400 -serdes_preemphasis_lane3_ce5=0x2C4400 +serdes_preemphasis_lane0_ce5=0x003c08 +serdes_preemphasis_lane1_ce5=0x003c08 +serdes_preemphasis_lane2_ce5=0x003c08 +serdes_preemphasis_lane3_ce5=0x003c08 serdes_if_type_ce5=14 serdes_driver_current_lane0_ce6=0x9 serdes_driver_current_lane1_ce6=0x9 serdes_driver_current_lane2_ce6=0x9 -serdes_driver_current_lane3_ce6=0xE -serdes_preemphasis_lane0_ce6=0x2C4400 -serdes_preemphasis_lane1_ce6=0x2C4400 -serdes_preemphasis_lane2_ce6=0x2C4400 -serdes_preemphasis_lane3_ce6=0x304000 +serdes_driver_current_lane3_ce6=0xe +serdes_preemphasis_lane0_ce6=0x003c08 +serdes_preemphasis_lane1_ce6=0x003c08 +serdes_preemphasis_lane2_ce6=0x003c08 +serdes_preemphasis_lane3_ce6=0x003c08 serdes_if_type_ce6=14 serdes_driver_current_lane0_ce7=0x9 -serdes_driver_current_lane1_ce7=0xA +serdes_driver_current_lane1_ce7=0xa serdes_driver_current_lane2_ce7=0x9 -serdes_driver_current_lane3_ce7=0XE -serdes_preemphasis_lane0_ce7=0x284800 -serdes_preemphasis_lane1_ce7=0x304000 -serdes_preemphasis_lane2_ce7=0x2C4400 -serdes_preemphasis_lane3_ce7=0x343C00 +serdes_driver_current_lane3_ce7=0Xe +serdes_preemphasis_lane0_ce7=0x003c08 +serdes_preemphasis_lane1_ce7=0x003c08 +serdes_preemphasis_lane2_ce7=0x003c08 +serdes_preemphasis_lane3_ce7=0x003c08 serdes_if_type_ce7=14 -serdes_driver_current_lane0_ce8=0x9 -serdes_driver_current_lane1_ce8=0xE -serdes_driver_current_lane2_ce8=0xF -serdes_driver_current_lane3_ce8=0xE -serdes_preemphasis_lane0_ce8=0x2C4400 -serdes_preemphasis_lane1_ce8=0x304000 -serdes_preemphasis_lane2_ce8=0x343C00 -serdes_preemphasis_lane3_ce8=0x304000 +serdes_driver_current_lane0_ce8=0xf +serdes_driver_current_lane1_ce8=0xf +serdes_driver_current_lane2_ce8=0xf +serdes_driver_current_lane3_ce8=0xf +serdes_preemphasis_lane0_ce8=0x043c08 +serdes_preemphasis_lane1_ce8=0x003c08 +serdes_preemphasis_lane2_ce8=0x043c08 +serdes_preemphasis_lane3_ce8=0x003c08 serdes_if_type_ce8=14 -serdes_driver_current_lane0_ce9=0x9 -serdes_driver_current_lane1_ce9=0xD -serdes_driver_current_lane2_ce9=0xD -serdes_driver_current_lane3_ce9=0xF -serdes_preemphasis_lane0_ce9=0x2C4400 -serdes_preemphasis_lane1_ce9=0x343C00 -serdes_preemphasis_lane2_ce9=0x343C00 -serdes_preemphasis_lane3_ce9=0x343C00 +serdes_driver_current_lane0_ce9=0xf +serdes_driver_current_lane1_ce9=0xf +serdes_driver_current_lane2_ce9=0xf +serdes_driver_current_lane3_ce9=0xf +serdes_preemphasis_lane0_ce9=0x043c08 +serdes_preemphasis_lane1_ce9=0x043c08 +serdes_preemphasis_lane2_ce9=0x043c08 +serdes_preemphasis_lane3_ce9=0x043c08 serdes_if_type_ce9=14 -serdes_driver_current_lane0_ce10=0xD -serdes_driver_current_lane1_ce10=0xE -serdes_driver_current_lane2_ce10=0xD -serdes_driver_current_lane3_ce10=0xD -serdes_preemphasis_lane0_ce10=0x343C00 -serdes_preemphasis_lane1_ce10=0x343C00 -serdes_preemphasis_lane2_ce10=0x343C00 -serdes_preemphasis_lane3_ce10=0x343C00 +serdes_driver_current_lane0_ce10=0xf +serdes_driver_current_lane1_ce10=0xf +serdes_driver_current_lane2_ce10=0xf +serdes_driver_current_lane3_ce10=0xf +serdes_preemphasis_lane0_ce10=0x043c08 +serdes_preemphasis_lane1_ce10=0x083c10 +serdes_preemphasis_lane2_ce10=0x043c08 +serdes_preemphasis_lane3_ce10=0x043c08 serdes_if_type_ce10=14 -serdes_driver_current_lane0_ce11=0xE -serdes_driver_current_lane1_ce11=0xD -serdes_driver_current_lane2_ce11=0xD -serdes_driver_current_lane3_ce11=0xD -serdes_preemphasis_lane0_ce11=0x343C00 -serdes_preemphasis_lane1_ce11=0x343C00 -serdes_preemphasis_lane2_ce11=0X343C00 -serdes_preemphasis_lane3_ce11=0X343C00 +serdes_driver_current_lane0_ce11=0xf +serdes_driver_current_lane1_ce11=0xf +serdes_driver_current_lane2_ce11=0xf +serdes_driver_current_lane3_ce11=0xf +serdes_preemphasis_lane0_ce11=0x083c08 +serdes_preemphasis_lane1_ce11=0x043c08 +serdes_preemphasis_lane2_ce11=0X043c08 +serdes_preemphasis_lane3_ce11=0X043c08 serdes_if_type_ce11=14 -serdes_driver_current_lane0_ce12=0xD -serdes_driver_current_lane1_ce12=0xD -serdes_driver_current_lane2_ce12=0xD -serdes_driver_current_lane3_ce12=0xD -serdes_preemphasis_lane0_ce12=0x343C00 -serdes_preemphasis_lane1_ce12=0x343C00 -serdes_preemphasis_lane2_ce12=0x343C00 -serdes_preemphasis_lane3_ce12=0x343C00 +serdes_driver_current_lane0_ce12=0xf +serdes_driver_current_lane1_ce12=0xf +serdes_driver_current_lane2_ce12=0xf +serdes_driver_current_lane3_ce12=0xf +serdes_preemphasis_lane0_ce12=0x0c3c08 +serdes_preemphasis_lane1_ce12=0x083c08 +serdes_preemphasis_lane2_ce12=0x0c3c08 +serdes_preemphasis_lane3_ce12=0x083c08 serdes_if_type_ce12=14 -serdes_driver_current_lane0_ce13=0xD -serdes_driver_current_lane1_ce13=0xD -serdes_driver_current_lane2_ce13=0xD -serdes_driver_current_lane3_ce13=0xF -serdes_preemphasis_lane0_ce13=0x343C00 -serdes_preemphasis_lane1_ce13=0x343C00 -serdes_preemphasis_lane2_ce13=0x343C00 -serdes_preemphasis_lane3_ce13=0x005800 +serdes_driver_current_lane0_ce13=0xf +serdes_driver_current_lane1_ce13=0xf +serdes_driver_current_lane2_ce13=0xf +serdes_driver_current_lane3_ce13=0xf +serdes_preemphasis_lane0_ce13=0x083c08 +serdes_preemphasis_lane1_ce13=0x0c3c08 +serdes_preemphasis_lane2_ce13=0x083c08 +serdes_preemphasis_lane3_ce13=0x0c3c08 serdes_if_type_ce13=14 -serdes_driver_current_lane0_ce14=0xE -serdes_driver_current_lane1_ce14=0xD -serdes_driver_current_lane2_ce14=0xD -serdes_driver_current_lane3_ce14=0xE -serdes_preemphasis_lane0_ce14=0x383800 -serdes_preemphasis_lane1_ce14=0x343C00 -serdes_preemphasis_lane2_ce14=0x343C00 -serdes_preemphasis_lane3_ce14=0x383800 +serdes_driver_current_lane0_ce14=0xf +serdes_driver_current_lane1_ce14=0xf +serdes_driver_current_lane2_ce14=0xf +serdes_driver_current_lane3_ce14=0xf +serdes_preemphasis_lane0_ce14=0x103c10 +serdes_preemphasis_lane1_ce14=0x0c3c08 +serdes_preemphasis_lane2_ce14=0x0c3c08 +serdes_preemphasis_lane3_ce14=0x0c3c08 serdes_if_type_ce14=14 -serdes_driver_current_lane0_ce15=0xD -serdes_driver_current_lane1_ce15=0xC -serdes_driver_current_lane2_ce15=0xC -serdes_driver_current_lane3_ce15=0xF -serdes_preemphasis_lane0_ce15=0x343C00 -serdes_preemphasis_lane1_ce15=0x304000 -serdes_preemphasis_lane2_ce15=0x304000 -serdes_preemphasis_lane3_ce15=0x005100 +serdes_driver_current_lane0_ce15=0xf +serdes_driver_current_lane1_ce15=0xf +serdes_driver_current_lane2_ce15=0xf +serdes_driver_current_lane3_ce15=0xf +serdes_preemphasis_lane0_ce15=0x143c08 +serdes_preemphasis_lane1_ce15=0x103c08 +serdes_preemphasis_lane2_ce15=0x103c08 +serdes_preemphasis_lane3_ce15=0x103c08 serdes_if_type_ce15=14 diff --git a/device/ingrasys/x86_64-ingrasys_s9100-r0/plugins/sfputil.py b/device/ingrasys/x86_64-ingrasys_s9100-r0/plugins/sfputil.py index 377f4109db18..849bd13d94d3 100644 --- a/device/ingrasys/x86_64-ingrasys_s9100-r0/plugins/sfputil.py +++ b/device/ingrasys/x86_64-ingrasys_s9100-r0/plugins/sfputil.py @@ -3,6 +3,8 @@ # Platform-specific SFP transceiver interface for SONiC # +import os + try: import time from sonic_sfp.sfputilbase import SfpUtilBase @@ -16,6 +18,7 @@ class SfpUtil(SfpUtilBase): PORT_START = 0 PORT_END = 31 PORTS_IN_BLOCK = 32 + GPIO_OFFSET = 0 BASE_DIR_PATH = "/sys/class/gpio/gpio{0}/direction" BASE_VAL_PATH = "/sys/class/gpio/gpio{0}/value" @@ -56,110 +59,9 @@ class SfpUtil(SfpUtilBase): 31: 40 } - abs_to_gpio_mapping = { - 0: 241, - 1: 240, - 2: 243, - 3: 242, - 4: 245, - 5: 244, - 6: 247, - 7: 246, - 8: 249, - 9: 248, - 10: 251, - 11: 250, - 12: 253, - 13: 252, - 14: 255, - 15: 254, - 16: 225, - 17: 224, - 18: 227, - 19: 226, - 20: 229, - 21: 228, - 22: 231, - 23: 230, - 24: 233, - 25: 232, - 26: 235, - 27: 234, - 28: 237, - 29: 236, - 30: 239, - 31: 238 - } - - lpmode_to_gpio_mapping = { - 0: 177, - 1: 176, - 2: 179, - 3: 178, - 4: 181, - 5: 180, - 6: 183, - 7: 182, - 8: 185, - 9: 184, - 10: 187, - 11: 186, - 12: 189, - 13: 188, - 14: 191, - 15: 190, - 16: 161, - 17: 160, - 18: 163, - 19: 162, - 20: 165, - 21: 164, - 22: 167, - 23: 166, - 24: 169, - 25: 168, - 26: 171, - 27: 170, - 28: 173, - 29: 172, - 30: 175, - 31: 174 - } - - reset_to_gpio_mapping = { - 0: 145, - 1: 144, - 2: 147, - 3: 146, - 4: 149, - 5: 148, - 6: 151, - 7: 150, - 8: 153, - 9: 152, - 10: 155, - 11: 154, - 12: 157, - 13: 156, - 14: 159, - 15: 158, - 16: 129, - 17: 128, - 18: 131, - 19: 130, - 20: 133, - 21: 132, - 22: 135, - 23: 134, - 24: 137, - 25: 136, - 26: 139, - 27: 138, - 28: 141, - 29: 140, - 30: 143, - 31: 142 - } + abs_to_gpio_mapping = {} + lpmode_to_gpio_mapping = {} + reset_to_gpio_mapping = {} @property def port_start(self): @@ -177,7 +79,139 @@ def qsfp_ports(self): def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping + def set_gpio_offset(self): + sys_gpio_dir = "/sys/class/gpio" + self.GPIO_OFFSET = 0 + gpiochip_no = 0 + for d in os.listdir(sys_gpio_dir): + if "gpiochip" in d: + try: + gpiochip_no = int(d[8:],10) + except ValueError as e: + print "Error: %s" % str(e) + if gpiochip_no > 255: + self.GPIO_OFFSET=256 + return True + return True + + def init_abs_to_gpio_mapping(self): + self.abs_to_gpio_mapping = { + 0: 241+self.GPIO_OFFSET, + 1: 240+self.GPIO_OFFSET, + 2: 243+self.GPIO_OFFSET, + 3: 242+self.GPIO_OFFSET, + 4: 245+self.GPIO_OFFSET, + 5: 244+self.GPIO_OFFSET, + 6: 247+self.GPIO_OFFSET, + 7: 246+self.GPIO_OFFSET, + 8: 249+self.GPIO_OFFSET, + 9: 248+self.GPIO_OFFSET, + 10: 251+self.GPIO_OFFSET, + 11: 250+self.GPIO_OFFSET, + 12: 253+self.GPIO_OFFSET, + 13: 252+self.GPIO_OFFSET, + 14: 255+self.GPIO_OFFSET, + 15: 254+self.GPIO_OFFSET, + 16: 225+self.GPIO_OFFSET, + 17: 224+self.GPIO_OFFSET, + 18: 227+self.GPIO_OFFSET, + 19: 226+self.GPIO_OFFSET, + 20: 229+self.GPIO_OFFSET, + 21: 228+self.GPIO_OFFSET, + 22: 231+self.GPIO_OFFSET, + 23: 230+self.GPIO_OFFSET, + 24: 233+self.GPIO_OFFSET, + 25: 232+self.GPIO_OFFSET, + 26: 235+self.GPIO_OFFSET, + 27: 234+self.GPIO_OFFSET, + 28: 237+self.GPIO_OFFSET, + 29: 236+self.GPIO_OFFSET, + 30: 239+self.GPIO_OFFSET, + 31: 238+self.GPIO_OFFSET + } + return True + + def init_lpmode_to_gpio_mapping(self): + self.lpmode_to_gpio_mapping = { + 0: 177+self.GPIO_OFFSET, + 1: 176+self.GPIO_OFFSET, + 2: 179+self.GPIO_OFFSET, + 3: 178+self.GPIO_OFFSET, + 4: 181+self.GPIO_OFFSET, + 5: 180+self.GPIO_OFFSET, + 6: 183+self.GPIO_OFFSET, + 7: 182+self.GPIO_OFFSET, + 8: 185+self.GPIO_OFFSET, + 9: 184+self.GPIO_OFFSET, + 10: 187+self.GPIO_OFFSET, + 11: 186+self.GPIO_OFFSET, + 12: 189+self.GPIO_OFFSET, + 13: 188+self.GPIO_OFFSET, + 14: 191+self.GPIO_OFFSET, + 15: 190+self.GPIO_OFFSET, + 16: 161+self.GPIO_OFFSET, + 17: 160+self.GPIO_OFFSET, + 18: 163+self.GPIO_OFFSET, + 19: 162+self.GPIO_OFFSET, + 20: 165+self.GPIO_OFFSET, + 21: 164+self.GPIO_OFFSET, + 22: 167+self.GPIO_OFFSET, + 23: 166+self.GPIO_OFFSET, + 24: 169+self.GPIO_OFFSET, + 25: 168+self.GPIO_OFFSET, + 26: 171+self.GPIO_OFFSET, + 27: 170+self.GPIO_OFFSET, + 28: 173+self.GPIO_OFFSET, + 29: 172+self.GPIO_OFFSET, + 30: 175+self.GPIO_OFFSET, + 31: 174+self.GPIO_OFFSET + } + return True + + def init_reset_to_gpio_mapping(self): + self.reset_to_gpio_mapping = { + 0: 145+self.GPIO_OFFSET, + 1: 144+self.GPIO_OFFSET, + 2: 147+self.GPIO_OFFSET, + 3: 146+self.GPIO_OFFSET, + 4: 149+self.GPIO_OFFSET, + 5: 148+self.GPIO_OFFSET, + 6: 151+self.GPIO_OFFSET, + 7: 150+self.GPIO_OFFSET, + 8: 153+self.GPIO_OFFSET, + 9: 152+self.GPIO_OFFSET, + 10: 155+self.GPIO_OFFSET, + 11: 154+self.GPIO_OFFSET, + 12: 157+self.GPIO_OFFSET, + 13: 156+self.GPIO_OFFSET, + 14: 159+self.GPIO_OFFSET, + 15: 158+self.GPIO_OFFSET, + 16: 129+self.GPIO_OFFSET, + 17: 128+self.GPIO_OFFSET, + 18: 131+self.GPIO_OFFSET, + 19: 130+self.GPIO_OFFSET, + 20: 133+self.GPIO_OFFSET, + 21: 132+self.GPIO_OFFSET, + 22: 135+self.GPIO_OFFSET, + 23: 134+self.GPIO_OFFSET, + 24: 137+self.GPIO_OFFSET, + 25: 136+self.GPIO_OFFSET, + 26: 139+self.GPIO_OFFSET, + 27: 138+self.GPIO_OFFSET, + 28: 141+self.GPIO_OFFSET, + 29: 140+self.GPIO_OFFSET, + 30: 143+self.GPIO_OFFSET, + 31: 142+self.GPIO_OFFSET + } + return True + def __init__(self): + # Init abs, lpmode, and reset to gpio mapping + self.set_gpio_offset() + self.init_abs_to_gpio_mapping() + self.init_lpmode_to_gpio_mapping() + self.init_reset_to_gpio_mapping() + # Override port_to_eeprom_mapping for class initialization eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/plugins/sfputil.py b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/plugins/sfputil.py index fecb54bf0879..72df5bd04915 100644 --- a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/plugins/sfputil.py +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/plugins/sfputil.py @@ -3,6 +3,8 @@ # Platform-specific SFP transceiver interface for SONiC # +import os + try: import time from sonic_sfp.sfputilbase import SfpUtilBase @@ -23,6 +25,7 @@ class SfpUtil(SfpUtilBase): LP_MODE_GPIO_BASE_16_31 = 160 RST_GPIO_BASE_0_15 = 144 RST_GPIO_BASE_16_31 = 128 + GPIO_OFFSET = 0 GPIO_VAL_PATH = "/sys/class/gpio/gpio{0}/value" @@ -44,8 +47,35 @@ def qsfp_ports(self): def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping + def set_gpio_offset(self): + sys_gpio_dir = "/sys/class/gpio" + self.GPIO_OFFSET = 0 + gpiochip_no = 0 + for d in os.listdir(sys_gpio_dir): + if "gpiochip" in d: + try: + gpiochip_no = int(d[8:],10) + except ValueError as e: + print "Error: %s" % str(e) + if gpiochip_no > 255: + self.GPIO_OFFSET=256 + return True + return True + + def update_gpio_base(self): + self.ABS_GPIO_BASE_0_15 = 240 + self.GPIO_OFFSET + self.ABS_GPIO_BASE_16_31 = 224 + self.GPIO_OFFSET + self.LP_MODE_GPIO_BASE_0_15 = 176 + self.GPIO_OFFSET + self.LP_MODE_GPIO_BASE_16_31 = 160 + self.GPIO_OFFSET + self.RST_GPIO_BASE_0_15 = 144 + self.GPIO_OFFSET + self.RST_GPIO_BASE_16_31 = 128 + self.GPIO_OFFSET + return True def __init__(self): + # Update abs, lpmode, and reset gpio base + self.set_gpio_offset() + self.update_gpio_base() + # Override port_to_eeprom_mapping for class initialization eeprom_path = '/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom' for x in range(self.port_start, self.port_end + 1): diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/psuutil.py b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/psuutil.py index 8a719388266a..25cdfb031882 100644 --- a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/psuutil.py +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/psuutil.py @@ -15,9 +15,26 @@ class PsuUtil(PsuBase): """Platform-specific PSUutil class""" + GPIO_OFFSET = 0 SYS_GPIO_DIR = "/sys/class/gpio/" + def set_gpio_offset(self): + sys_gpio_dir = "/sys/class/gpio" + self.GPIO_OFFSET = 0 + gpiochip_no = 0 + for d in os.listdir(sys_gpio_dir): + if "gpiochip" in d: + try: + gpiochip_no = int(d[8:],10) + except ValueError as e: + print "Error: %s" % str(e) + if gpiochip_no > 255: + self.GPIO_OFFSET=256 + return True + return True + def __init__(self): + self.set_gpio_offset() PsuBase.__init__(self) @@ -54,7 +71,7 @@ def get_psu_status(self, index): faulty """ status = 0 - gpio_path = [ 'gpio99/value', 'gpio96/value' ] + gpio_path = [ 'gpio'+str(99+self.GPIO_OFFSET)+'/value', 'gpio'+str(96+self.GPIO_OFFSET)+'/value' ] attr_path = self.SYS_GPIO_DIR + gpio_path[index-1] attr_value = self.get_attr_value(attr_path) @@ -75,7 +92,7 @@ def get_psu_presence(self, index): :return: Boolean, True if PSU is plugged, False if not """ status = 0 - gpio_path = [ 'gpio100/value', 'gpio97/value' ] + gpio_path = [ 'gpio'+str(100+self.GPIO_OFFSET)+'/value', 'gpio'+str(97+self.GPIO_OFFSET)+'/value' ] attr_path = self.SYS_GPIO_DIR + gpio_path[index-1] attr_value = self.get_attr_value(attr_path) diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/sfputil.py b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/sfputil.py index 45be2a0e466c..00c5e10e0b0d 100644 --- a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/sfputil.py +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/sfputil.py @@ -3,6 +3,8 @@ # Platform-specific SFP transceiver interface for SONiC # +import os + try: import time from sonic_sfp.sfputilbase import SfpUtilBase @@ -17,6 +19,7 @@ class SfpUtil(SfpUtilBase): PORT_END = 33 SFP_PORT_START = 32 PORTS_IN_BLOCK = 34 + GPIO_OFFSET = 0 BASE_DIR_PATH = "/sys/class/gpio/gpio{0}/direction" BASE_VAL_PATH = "/sys/class/gpio/gpio{0}/value" @@ -59,112 +62,9 @@ class SfpUtil(SfpUtilBase): 33: 46 } - abs_to_gpio_mapping = { - 0: 241, - 1: 240, - 2: 243, - 3: 242, - 4: 245, - 5: 244, - 6: 247, - 7: 246, - 8: 249, - 9: 248, - 10: 251, - 11: 250, - 12: 253, - 13: 252, - 14: 255, - 15: 254, - 16: 225, - 17: 224, - 18: 227, - 19: 226, - 20: 229, - 21: 228, - 22: 231, - 23: 230, - 24: 233, - 25: 232, - 26: 235, - 27: 234, - 28: 237, - 29: 236, - 30: 239, - 31: 238, - 32: 177, - 33: 176 - } - - lpmode_to_gpio_mapping = { - 0: 161, - 1: 160, - 2: 163, - 3: 162, - 4: 165, - 5: 164, - 6: 167, - 7: 166, - 8: 169, - 9: 168, - 10: 171, - 11: 170, - 12: 173, - 13: 172, - 14: 175, - 15: 174, - 16: 145, - 17: 144, - 18: 147, - 19: 146, - 20: 149, - 21: 148, - 22: 151, - 23: 150, - 24: 153, - 25: 152, - 26: 155, - 27: 154, - 28: 157, - 29: 156, - 30: 159, - 31: 158 - } - - reset_to_gpio_mapping = { - 0: 129, - 1: 128, - 2: 131, - 3: 130, - 4: 133, - 5: 132, - 6: 135, - 7: 134, - 8: 137, - 9: 136, - 10: 139, - 11: 138, - 12: 141, - 13: 140, - 14: 143, - 15: 142, - 16: 113, - 17: 112, - 18: 115, - 19: 114, - 20: 117, - 21: 116, - 22: 119, - 23: 118, - 24: 121, - 25: 120, - 26: 123, - 27: 122, - 28: 125, - 29: 124, - 30: 127, - 31: 126 - } + abs_to_gpio_mapping = {} + lpmode_to_gpio_mapping = {} + reset_to_gpio_mapping = {} @property def port_start(self): @@ -185,7 +85,141 @@ def port_to_eeprom_mapping(self): def sfp_port_start(self): return self.SFP_PORT_START + def set_gpio_offset(self): + sys_gpio_dir = "/sys/class/gpio" + self.GPIO_OFFSET = 0 + gpiochip_no = 0 + for d in os.listdir(sys_gpio_dir): + if "gpiochip" in d: + try: + gpiochip_no = int(d[8:],10) + except ValueError as e: + print "Error: %s" % str(e) + if gpiochip_no > 255: + self.GPIO_OFFSET=256 + return True + return True + + def init_abs_to_gpio_mapping(self): + self.abs_to_gpio_mapping = { + 0: 241+self.GPIO_OFFSET, + 1: 240+self.GPIO_OFFSET, + 2: 243+self.GPIO_OFFSET, + 3: 242+self.GPIO_OFFSET, + 4: 245+self.GPIO_OFFSET, + 5: 244+self.GPIO_OFFSET, + 6: 247+self.GPIO_OFFSET, + 7: 246+self.GPIO_OFFSET, + 8: 249+self.GPIO_OFFSET, + 9: 248+self.GPIO_OFFSET, + 10: 251+self.GPIO_OFFSET, + 11: 250+self.GPIO_OFFSET, + 12: 253+self.GPIO_OFFSET, + 13: 252+self.GPIO_OFFSET, + 14: 255+self.GPIO_OFFSET, + 15: 254+self.GPIO_OFFSET, + 16: 225+self.GPIO_OFFSET, + 17: 224+self.GPIO_OFFSET, + 18: 227+self.GPIO_OFFSET, + 19: 226+self.GPIO_OFFSET, + 20: 229+self.GPIO_OFFSET, + 21: 228+self.GPIO_OFFSET, + 22: 231+self.GPIO_OFFSET, + 23: 230+self.GPIO_OFFSET, + 24: 233+self.GPIO_OFFSET, + 25: 232+self.GPIO_OFFSET, + 26: 235+self.GPIO_OFFSET, + 27: 234+self.GPIO_OFFSET, + 28: 237+self.GPIO_OFFSET, + 29: 236+self.GPIO_OFFSET, + 30: 239+self.GPIO_OFFSET, + 31: 238+self.GPIO_OFFSET, + 32: 177+self.GPIO_OFFSET, + 33: 176+self.GPIO_OFFSET + } + return True + + def init_lpmode_to_gpio_mapping(self): + self.lpmode_to_gpio_mapping = { + 0: 161+self.GPIO_OFFSET, + 1: 160+self.GPIO_OFFSET, + 2: 163+self.GPIO_OFFSET, + 3: 162+self.GPIO_OFFSET, + 4: 165+self.GPIO_OFFSET, + 5: 164+self.GPIO_OFFSET, + 6: 167+self.GPIO_OFFSET, + 7: 166+self.GPIO_OFFSET, + 8: 169+self.GPIO_OFFSET, + 9: 168+self.GPIO_OFFSET, + 10: 171+self.GPIO_OFFSET, + 11: 170+self.GPIO_OFFSET, + 12: 173+self.GPIO_OFFSET, + 13: 172+self.GPIO_OFFSET, + 14: 175+self.GPIO_OFFSET, + 15: 174+self.GPIO_OFFSET, + 16: 145+self.GPIO_OFFSET, + 17: 144+self.GPIO_OFFSET, + 18: 147+self.GPIO_OFFSET, + 19: 146+self.GPIO_OFFSET, + 20: 149+self.GPIO_OFFSET, + 21: 148+self.GPIO_OFFSET, + 22: 151+self.GPIO_OFFSET, + 23: 150+self.GPIO_OFFSET, + 24: 153+self.GPIO_OFFSET, + 25: 152+self.GPIO_OFFSET, + 26: 155+self.GPIO_OFFSET, + 27: 154+self.GPIO_OFFSET, + 28: 157+self.GPIO_OFFSET, + 29: 156+self.GPIO_OFFSET, + 30: 159+self.GPIO_OFFSET, + 31: 158+self.GPIO_OFFSET + } + return True + + def init_reset_to_gpio_mapping(self): + self.reset_to_gpio_mapping = { + 0: 129+self.GPIO_OFFSET, + 1: 128+self.GPIO_OFFSET, + 2: 131+self.GPIO_OFFSET, + 3: 130+self.GPIO_OFFSET, + 4: 133+self.GPIO_OFFSET, + 5: 132+self.GPIO_OFFSET, + 6: 135+self.GPIO_OFFSET, + 7: 134+self.GPIO_OFFSET, + 8: 137+self.GPIO_OFFSET, + 9: 136+self.GPIO_OFFSET, + 10: 139+self.GPIO_OFFSET, + 11: 138+self.GPIO_OFFSET, + 12: 141+self.GPIO_OFFSET, + 13: 140+self.GPIO_OFFSET, + 14: 143+self.GPIO_OFFSET, + 15: 142+self.GPIO_OFFSET, + 16: 113+self.GPIO_OFFSET, + 17: 112+self.GPIO_OFFSET, + 18: 115+self.GPIO_OFFSET, + 19: 114+self.GPIO_OFFSET, + 20: 117+self.GPIO_OFFSET, + 21: 116+self.GPIO_OFFSET, + 22: 119+self.GPIO_OFFSET, + 23: 118+self.GPIO_OFFSET, + 24: 121+self.GPIO_OFFSET, + 25: 120+self.GPIO_OFFSET, + 26: 123+self.GPIO_OFFSET, + 27: 122+self.GPIO_OFFSET, + 28: 125+self.GPIO_OFFSET, + 29: 124+self.GPIO_OFFSET, + 30: 127+self.GPIO_OFFSET, + 31: 126+self.GPIO_OFFSET + } + return True + def __init__(self): + # Init abs, lpmode, and reset to gpio mapping + self.set_gpio_offset() + self.init_abs_to_gpio_mapping() + self.init_lpmode_to_gpio_mapping() + self.init_reset_to_gpio_mapping() + # Override port_to_eeprom_mapping for class initialization eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" diff --git a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/port_config.ini b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/port_config.ini index f1127a5aa046..c1d2642fab8e 100644 --- a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/port_config.ini +++ b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/port_config.ini @@ -1,48 +1,48 @@ # name lanes alias index -Ethernet0 1,2,3,4 Ethernet1/1 0 -Ethernet4 5,6,7,8 Ethernet2/1 1 -Ethernet8 17,18,19,20 Ethernet3/1 2 -Ethernet12 21,22,23,24 Ethernet4/1 3 -Ethernet16 33,34,35,36 Ethernet5/1 4 -Ethernet20 37,38,39,40 Ethernet6/1 5 -Ethernet24 49,50,51,52 Ethernet7/1 6 -Ethernet28 53,54,55,56 Ethernet8/1 7 -Ethernet32 65,66,67,68 Ethernet9/1 8 -Ethernet36 69,70,71,72 Ethernet10/1 9 -Ethernet40 81,82,83,84 Ethernet11/1 10 -Ethernet44 85,86,87,88 Ethernet12/1 11 +Ethernet0 49,50,51,52 Ethernet1/1 0 +Ethernet4 53,54,55,56 Ethernet2/1 1 +Ethernet8 65,66,67,68 Ethernet3/1 2 +Ethernet12 69,70,71,72 Ethernet4/1 3 +Ethernet16 81,82,83,84 Ethernet5/1 4 +Ethernet20 85,86,87,88 Ethernet6/1 5 +Ethernet24 1,2,3,4 Ethernet7/1 6 +Ethernet28 5,6,7,8 Ethernet8/1 7 +Ethernet32 17,18,19,20 Ethernet9/1 8 +Ethernet36 21,22,23,24 Ethernet10/1 9 +Ethernet40 33,34,35,36 Ethernet11/1 10 +Ethernet44 37,38,39,40 Ethernet12/1 11 Ethernet48 97,98,99,100 Ethernet13/1 12 Ethernet52 101,102,103,104 Ethernet14/1 13 Ethernet56 113,114,115,116 Ethernet15/1 14 -Ethernet60 117,118,119,120 Ethernet16/1 15 +Ethernet60 117,118,119,120 Ethernet16/1 15 Ethernet64 129,130,131,132 Ethernet17/1 16 Ethernet68 133,134,135,136 Ethernet18/1 17 Ethernet72 145,146,147,148 Ethernet19/1 18 Ethernet76 149,150,151,152 Ethernet20/1 19 -Ethernet80 161,162,163,164 Ethernet21/1 20 -Ethernet84 165,166,167,168 Ethernet22/1 21 -Ethernet88 177,178,179,180 Ethernet23/1 22 -Ethernet92 181,182,183,184 Ethernet24/1 23 -Ethernet96 193,194,195,196 Ethernet25/1 24 -Ethernet100 197,198,199,200 Ethernet26/1 25 -Ethernet104 209,210,211,212 Ethernet27/1 26 -Ethernet108 213,214,215,216 Ethernet28/1 27 -Ethernet112 225,226,227,228 Ethernet29/1 28 -Ethernet116 229,230,231,232 Ethernet30/1 29 -Ethernet120 241,242,243,244 Ethernet31/1 30 -Ethernet124 245,246,247,248 Ethernet32/1 31 -Ethernet128 9,10,11,12 Ethernet33/1 32 -Ethernet132 13,14,15,16 Ethernet34/1 33 -Ethernet136 25,26,27,28 Ethernet35/1 34 -Ethernet140 29,30,31,32 Ethernet36/1 35 -Ethernet144 41,42,43,44 Ethernet37/1 36 -Ethernet148 45,46,47,48 Ethernet38/1 37 -Ethernet152 57,58,59,60 Ethernet39/1 38 -Ethernet156 61,62,63,64 Ethernet40/1 39 -Ethernet160 73,74,75,76 Ethernet41/1 40 -Ethernet164 77,78,79,80 Ethernet42/1 41 -Ethernet168 89,90,91,92 Ethernet43/1 42 -Ethernet172 93,94,95,96 Ethernet44/1 43 +Ethernet80 209,210,211,212 Ethernet21/1 20 +Ethernet84 213,214,215,216 Ethernet22/1 21 +Ethernet88 225,226,227,228 Ethernet23/1 22 +Ethernet92 229,230,231,232 Ethernet24/1 23 +Ethernet96 241,242,243,244 Ethernet25/1 24 +Ethernet100 245,246,247,248 Ethernet26/1 25 +Ethernet104 161,162,163,164 Ethernet27/1 26 +Ethernet108 165,166,167,168 Ethernet28/1 27 +Ethernet112 177,178,179,180 Ethernet29/1 28 +Ethernet116 181,182,183,184 Ethernet30/1 29 +Ethernet120 193,194,195,196 Ethernet31/1 30 +Ethernet124 197,198,199,200 Ethernet32/1 31 +Ethernet128 57,58,59,60 Ethernet33/1 32 +Ethernet132 61,62,63,64 Ethernet34/1 33 +Ethernet136 73,74,75,76 Ethernet35/1 34 +Ethernet140 77,78,79,80 Ethernet36/1 35 +Ethernet144 89,90,91,92 Ethernet37/1 36 +Ethernet148 93,94,95,96 Ethernet38/1 37 +Ethernet152 9,10,11,12 Ethernet39/1 38 +Ethernet156 13,14,15,16 Ethernet40/1 39 +Ethernet160 25,26,27,28 Ethernet41/1 40 +Ethernet164 29,30,31,32 Ethernet42/1 41 +Ethernet168 41,42,43,44 Ethernet43/1 42 +Ethernet172 45,46,47,48 Ethernet44/1 43 Ethernet176 105,106,107,108 Ethernet45/1 44 Ethernet180 109,110,111,112 Ethernet46/1 45 Ethernet184 121,122,123,124 Ethernet47/1 46 @@ -51,15 +51,15 @@ Ethernet192 137,138,139,140 Ethernet49/1 48 Ethernet196 141,142,143,144 Ethernet50/1 49 Ethernet200 153,154,155,156 Ethernet51/1 50 Ethernet204 157,158,159,160 Ethernet52/1 51 -Ethernet208 169,170,171,172 Ethernet53/1 52 -Ethernet212 173,174,175,176 Ethernet54/1 53 -Ethernet216 185,186,187,188 Ethernet55/1 54 -Ethernet220 189,190,191,192 Ethernet56/1 55 -Ethernet224 201,202,203,204 Ethernet57/1 56 -Ethernet228 205,206,207,208 Ethernet58/1 57 -Ethernet232 217,218,219,220 Ethernet59/1 58 -Ethernet236 221,222,223,224 Ethernet60/1 59 -Ethernet240 233,234,235,236 Ethernet61/1 60 -Ethernet244 237,238,239,240 Ethernet62/1 61 -Ethernet248 249,250,251,252 Ethernet63/1 62 -Ethernet252 253,254,255,256 Ethernet64/1 63 +Ethernet208 217,218,219,220 Ethernet53/1 52 +Ethernet212 221,222,223,224 Ethernet54/1 53 +Ethernet216 233,234,235,236 Ethernet55/1 54 +Ethernet220 237,238,239,240 Ethernet56/1 55 +Ethernet224 249,250,251,252 Ethernet57/1 56 +Ethernet228 253,254,255,256 Ethernet58/1 57 +Ethernet232 169,170,171,172 Ethernet59/1 58 +Ethernet236 173,174,175,176 Ethernet60/1 59 +Ethernet240 185,186,187,188 Ethernet61/1 60 +Ethernet244 189,190,191,192 Ethernet62/1 61 +Ethernet248 201,202,203,204 Ethernet63/1 62 +Ethernet252 205,206,207,208 Ethernet64/1 63 diff --git a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/sai.profile b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/sai.profile index 20bbcc6a07df..5404ca338ffd 100644 --- a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/sai.profile +++ b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th2-s9200-64x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th2-s9200-64x100G.config.bcm diff --git a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/th2-s9200-64x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/th2-s9200-64x100G.config.bcm new file mode 100644 index 000000000000..b143fb425b92 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/INGRASYS-S9200-64X/th2-s9200-64x100G.config.bcm @@ -0,0 +1,873 @@ +#2018/3/6 + +os=unix + +oversubscribe_mode=1 +pbmp_xport_xe=0x3fffd0000ffff40003fffc0001fffe + +#ALPM enable +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +l3_mem_entries=40960 +l2_mem_entries=40960 + +#Parity +parity_correction=1 +parity_enable=1 + +l2xmsg_mode=1 +mmu_lossless=0 + +# core_clock_frequency can be 1125, 850, 765, 672, 645 or 545 +#core_clock_frequency=1125 + + +#PIPE-0 +#FC 0 +portmap_1=1:100 +phy_chain_tx_polarity_flip_physical{1.0}=0 +phy_chain_tx_polarity_flip_physical{2.0}=1 +phy_chain_tx_polarity_flip_physical{3.0}=0 +phy_chain_tx_polarity_flip_physical{4.0}=0 +phy_chain_rx_polarity_flip_physical{1.0}=1 +phy_chain_rx_polarity_flip_physical{2.0}=1 +phy_chain_rx_polarity_flip_physical{3.0}=0 +phy_chain_rx_polarity_flip_physical{4.0}=1 +phy_chain_tx_lane_map_physical{1.0}=0x3210 +phy_chain_rx_lane_map_physical{1.0}=0x0312 + +#FC 1 +portmap_2=5:100 +phy_chain_tx_polarity_flip_physical{5.0}=1 +phy_chain_tx_polarity_flip_physical{6.0}=1 +phy_chain_tx_polarity_flip_physical{7.0}=0 +phy_chain_tx_polarity_flip_physical{8.0}=0 +phy_chain_rx_polarity_flip_physical{5.0}=1 +phy_chain_rx_polarity_flip_physical{6.0}=0 +phy_chain_rx_polarity_flip_physical{7.0}=1 +phy_chain_rx_polarity_flip_physical{8.0}=1 +phy_chain_tx_lane_map_physical{5.0}=0x1023 +phy_chain_rx_lane_map_physical{5.0}=0x2103 + +#FC 2 +portmap_3=9:100 +phy_chain_tx_polarity_flip_physical{9.0}=0 +phy_chain_tx_polarity_flip_physical{10.0}=0 +phy_chain_tx_polarity_flip_physical{11.0}=1 +phy_chain_tx_polarity_flip_physical{12.0}=1 +phy_chain_rx_polarity_flip_physical{9.0}=1 +phy_chain_rx_polarity_flip_physical{10.0}=1 +phy_chain_rx_polarity_flip_physical{11.0}=0 +phy_chain_rx_polarity_flip_physical{12.0}=1 +phy_chain_tx_lane_map_physical{9.0}=0x3201 +phy_chain_rx_lane_map_physical{9.0}=0x1320 + +#FC 3 +portmap_4=13:100 +phy_chain_tx_polarity_flip_physical{13.0}=0 +phy_chain_tx_polarity_flip_physical{14.0}=0 +phy_chain_tx_polarity_flip_physical{15.0}=0 +phy_chain_tx_polarity_flip_physical{16.0}=1 +phy_chain_rx_polarity_flip_physical{13.0}=0 +phy_chain_rx_polarity_flip_physical{14.0}=0 +phy_chain_rx_polarity_flip_physical{15.0}=0 +phy_chain_rx_polarity_flip_physical{16.0}=0 +phy_chain_tx_lane_map_physical{13.0}=0x2013 +phy_chain_rx_lane_map_physical{13.0}=0x2310 + +#FC 4 +portmap_5=17:100 +phy_chain_tx_polarity_flip_physical{17.0}=1 +phy_chain_tx_polarity_flip_physical{18.0}=0 +phy_chain_tx_polarity_flip_physical{19.0}=0 +phy_chain_tx_polarity_flip_physical{20.0}=0 +phy_chain_rx_polarity_flip_physical{17.0}=0 +phy_chain_rx_polarity_flip_physical{18.0}=1 +phy_chain_rx_polarity_flip_physical{19.0}=1 +phy_chain_rx_polarity_flip_physical{20.0}=1 +phy_chain_tx_lane_map_physical{17.0}=0x0213 +phy_chain_rx_lane_map_physical{17.0}=0x0132 + +#FC 5 +portmap_6=21:100 +phy_chain_tx_polarity_flip_physical{21.0}=1 +phy_chain_tx_polarity_flip_physical{22.0}=1 +phy_chain_tx_polarity_flip_physical{23.0}=0 +phy_chain_tx_polarity_flip_physical{24.0}=0 +phy_chain_rx_polarity_flip_physical{21.0}=1 +phy_chain_rx_polarity_flip_physical{22.0}=0 +phy_chain_rx_polarity_flip_physical{23.0}=0 +phy_chain_rx_polarity_flip_physical{24.0}=1 +phy_chain_tx_lane_map_physical{21.0}=0x3021 +phy_chain_rx_lane_map_physical{21.0}=0x0312 + +#FC 6 +portmap_7=25:100 +phy_chain_tx_polarity_flip_physical{25.0}=0 +phy_chain_tx_polarity_flip_physical{26.0}=0 +phy_chain_tx_polarity_flip_physical{27.0}=0 +phy_chain_tx_polarity_flip_physical{28.0}=0 +phy_chain_rx_polarity_flip_physical{25.0}=0 +phy_chain_rx_polarity_flip_physical{26.0}=0 +phy_chain_rx_polarity_flip_physical{27.0}=0 +phy_chain_rx_polarity_flip_physical{28.0}=0 +phy_chain_tx_lane_map_physical{25.0}=0x2310 +phy_chain_rx_lane_map_physical{25.0}=0x1302 + +#FC 7 +portmap_8=29:100 +phy_chain_tx_polarity_flip_physical{29.0}=0 +phy_chain_tx_polarity_flip_physical{30.0}=0 +phy_chain_tx_polarity_flip_physical{31.0}=0 +phy_chain_tx_polarity_flip_physical{32.0}=1 +phy_chain_rx_polarity_flip_physical{29.0}=0 +phy_chain_rx_polarity_flip_physical{30.0}=0 +phy_chain_rx_polarity_flip_physical{31.0}=1 +phy_chain_rx_polarity_flip_physical{32.0}=0 +phy_chain_tx_lane_map_physical{29.0}=0x2031 +phy_chain_rx_lane_map_physical{29.0}=0x2310 + +#FC 8 +portmap_9=33:100 +phy_chain_tx_polarity_flip_physical{33.0}=1 +phy_chain_tx_polarity_flip_physical{34.0}=1 +phy_chain_tx_polarity_flip_physical{35.0}=0 +phy_chain_tx_polarity_flip_physical{36.0}=1 +phy_chain_rx_polarity_flip_physical{33.0}=1 +phy_chain_rx_polarity_flip_physical{34.0}=0 +phy_chain_rx_polarity_flip_physical{35.0}=0 +phy_chain_rx_polarity_flip_physical{36.0}=0 +phy_chain_tx_lane_map_physical{33.0}=0x3120 +phy_chain_rx_lane_map_physical{33.0}=0x2130 + +#FC 9 +portmap_10=37:100 +phy_chain_tx_polarity_flip_physical{37.0}=1 +phy_chain_tx_polarity_flip_physical{38.0}=1 +phy_chain_tx_polarity_flip_physical{39.0}=1 +phy_chain_tx_polarity_flip_physical{40.0}=1 +phy_chain_rx_polarity_flip_physical{37.0}=0 +phy_chain_rx_polarity_flip_physical{38.0}=1 +phy_chain_rx_polarity_flip_physical{39.0}=0 +phy_chain_rx_polarity_flip_physical{40.0}=0 +phy_chain_tx_lane_map_physical{37.0}=0x0123 +phy_chain_rx_lane_map_physical{37.0}=0x1230 + +#FC 10 +portmap_11=41:100 +phy_chain_tx_polarity_flip_physical{41.0}=1 +phy_chain_tx_polarity_flip_physical{42.0}=1 +phy_chain_tx_polarity_flip_physical{43.0}=0 +phy_chain_tx_polarity_flip_physical{44.0}=0 +phy_chain_rx_polarity_flip_physical{41.0}=1 +phy_chain_rx_polarity_flip_physical{42.0}=0 +phy_chain_rx_polarity_flip_physical{43.0}=0 +phy_chain_rx_polarity_flip_physical{44.0}=0 +phy_chain_tx_lane_map_physical{41.0}=0x3021 +phy_chain_rx_lane_map_physical{41.0}=0x1230 + +#FC 11 +portmap_12=45:100 +phy_chain_tx_polarity_flip_physical{45.0}=0 +phy_chain_tx_polarity_flip_physical{46.0}=1 +phy_chain_tx_polarity_flip_physical{47.0}=1 +phy_chain_tx_polarity_flip_physical{48.0}=1 +phy_chain_rx_polarity_flip_physical{45.0}=0 +phy_chain_rx_polarity_flip_physical{46.0}=1 +phy_chain_rx_polarity_flip_physical{47.0}=1 +phy_chain_rx_polarity_flip_physical{48.0}=1 +phy_chain_tx_lane_map_physical{45.0}=0x0123 +phy_chain_rx_lane_map_physical{45.0}=0x0213 + +#FC 12 +portmap_13=49:100 +phy_chain_tx_polarity_flip_physical{49.0}=1 +phy_chain_tx_polarity_flip_physical{50.0}=0 +phy_chain_tx_polarity_flip_physical{51.0}=1 +phy_chain_tx_polarity_flip_physical{52.0}=0 +phy_chain_rx_polarity_flip_physical{49.0}=1 +phy_chain_rx_polarity_flip_physical{50.0}=1 +phy_chain_rx_polarity_flip_physical{51.0}=1 +phy_chain_rx_polarity_flip_physical{52.0}=0 +phy_chain_tx_lane_map_physical{49.0}=0x0213 +phy_chain_rx_lane_map_physical{49.0}=0x0123 + +#FC 13 +portmap_14=53:100 +phy_chain_tx_polarity_flip_physical{53.0}=1 +phy_chain_tx_polarity_flip_physical{54.0}=1 +phy_chain_tx_polarity_flip_physical{55.0}=0 +phy_chain_tx_polarity_flip_physical{56.0}=1 +phy_chain_rx_polarity_flip_physical{53.0}=0 +phy_chain_rx_polarity_flip_physical{54.0}=1 +phy_chain_rx_polarity_flip_physical{55.0}=1 +phy_chain_rx_polarity_flip_physical{56.0}=1 +phy_chain_tx_lane_map_physical{53.0}=0x2031 +phy_chain_rx_lane_map_physical{53.0}=0x0132 + +#FC 14 +portmap_15=57:100 +phy_chain_tx_polarity_flip_physical{57.0}=1 +phy_chain_tx_polarity_flip_physical{58.0}=0 +phy_chain_tx_polarity_flip_physical{59.0}=0 +phy_chain_tx_polarity_flip_physical{60.0}=0 +phy_chain_rx_polarity_flip_physical{57.0}=0 +phy_chain_rx_polarity_flip_physical{58.0}=0 +phy_chain_rx_polarity_flip_physical{59.0}=0 +phy_chain_rx_polarity_flip_physical{60.0}=0 +phy_chain_tx_lane_map_physical{57.0}=0x3021 +phy_chain_rx_lane_map_physical{57.0}=0x2103 + +#FC 15 +portmap_16=61:100 +phy_chain_tx_polarity_flip_physical{61.0}=0 +phy_chain_tx_polarity_flip_physical{62.0}=0 +phy_chain_tx_polarity_flip_physical{63.0}=0 +phy_chain_tx_polarity_flip_physical{64.0}=1 +phy_chain_rx_polarity_flip_physical{61.0}=0 +phy_chain_rx_polarity_flip_physical{62.0}=1 +phy_chain_rx_polarity_flip_physical{63.0}=1 +phy_chain_rx_polarity_flip_physical{64.0}=1 +phy_chain_tx_lane_map_physical{61.0}=0x0132 +phy_chain_rx_lane_map_physical{61.0}=0x1320 + +#PIPE-1 +#FC 16 +portmap_34=65:100 +phy_chain_tx_polarity_flip_physical{65.0}=1 +phy_chain_tx_polarity_flip_physical{66.0}=1 +phy_chain_tx_polarity_flip_physical{67.0}=1 +phy_chain_tx_polarity_flip_physical{68.0}=1 +phy_chain_rx_polarity_flip_physical{65.0}=0 +phy_chain_rx_polarity_flip_physical{66.0}=0 +phy_chain_rx_polarity_flip_physical{67.0}=1 +phy_chain_rx_polarity_flip_physical{68.0}=0 +phy_chain_tx_lane_map_physical{65.0}=0x2031 +phy_chain_rx_lane_map_physical{65.0}=0x2031 + +#FC 17 +portmap_35=69:100 +phy_chain_tx_polarity_flip_physical{69.0}=1 +phy_chain_tx_polarity_flip_physical{70.0}=0 +phy_chain_tx_polarity_flip_physical{71.0}=0 +phy_chain_tx_polarity_flip_physical{72.0}=1 +phy_chain_rx_polarity_flip_physical{69.0}=1 +phy_chain_rx_polarity_flip_physical{70.0}=0 +phy_chain_rx_polarity_flip_physical{71.0}=0 +phy_chain_rx_polarity_flip_physical{72.0}=1 +phy_chain_tx_lane_map_physical{69.0}=0x2031 +phy_chain_rx_lane_map_physical{69.0}=0x3201 + +#FC 18 +portmap_36=73:100 +phy_chain_tx_polarity_flip_physical{73.0}=0 +phy_chain_tx_polarity_flip_physical{74.0}=0 +phy_chain_tx_polarity_flip_physical{75.0}=1 +phy_chain_tx_polarity_flip_physical{76.0}=0 +phy_chain_rx_polarity_flip_physical{73.0}=1 +phy_chain_rx_polarity_flip_physical{74.0}=1 +phy_chain_rx_polarity_flip_physical{75.0}=0 +phy_chain_rx_polarity_flip_physical{76.0}=0 +phy_chain_tx_lane_map_physical{73.0}=0x3120 +phy_chain_rx_lane_map_physical{73.0}=0x3201 + +#FC 19 +portmap_37=77:100 +phy_chain_tx_polarity_flip_physical{77.0}=1 +phy_chain_tx_polarity_flip_physical{78.0}=0 +phy_chain_tx_polarity_flip_physical{79.0}=1 +phy_chain_tx_polarity_flip_physical{80.0}=0 +phy_chain_rx_polarity_flip_physical{77.0}=1 +phy_chain_rx_polarity_flip_physical{78.0}=0 +phy_chain_rx_polarity_flip_physical{79.0}=1 +phy_chain_rx_polarity_flip_physical{80.0}=0 +phy_chain_tx_lane_map_physical{77.0}=0x0132 +phy_chain_rx_lane_map_physical{77.0}=0x1032 + +#FC 20 +portmap_38=81:100 +phy_chain_tx_polarity_flip_physical{81.0}=1 +phy_chain_tx_polarity_flip_physical{82.0}=0 +phy_chain_tx_polarity_flip_physical{83.0}=1 +phy_chain_tx_polarity_flip_physical{84.0}=0 +phy_chain_rx_polarity_flip_physical{81.0}=0 +phy_chain_rx_polarity_flip_physical{82.0}=1 +phy_chain_rx_polarity_flip_physical{83.0}=1 +phy_chain_rx_polarity_flip_physical{84.0}=1 +phy_chain_tx_lane_map_physical{81.0}=0x0213 +phy_chain_rx_lane_map_physical{81.0}=0x1203 + +#FC 21 +portmap_39=85:100 +phy_chain_tx_polarity_flip_physical{85.0}=1 +phy_chain_tx_polarity_flip_physical{86.0}=1 +phy_chain_tx_polarity_flip_physical{87.0}=0 +phy_chain_tx_polarity_flip_physical{88.0}=0 +phy_chain_rx_polarity_flip_physical{85.0}=0 +phy_chain_rx_polarity_flip_physical{86.0}=1 +phy_chain_rx_polarity_flip_physical{87.0}=0 +phy_chain_rx_polarity_flip_physical{88.0}=1 +phy_chain_tx_lane_map_physical{85.0}=0x3021 +phy_chain_rx_lane_map_physical{85.0}=0x1230 + +#FC 22 +portmap_40=89:100 +phy_chain_tx_polarity_flip_physical{89.0}=1 +phy_chain_tx_polarity_flip_physical{90.0}=0 +phy_chain_tx_polarity_flip_physical{91.0}=0 +phy_chain_tx_polarity_flip_physical{92.0}=0 +phy_chain_rx_polarity_flip_physical{89.0}=1 +phy_chain_rx_polarity_flip_physical{90.0}=1 +phy_chain_rx_polarity_flip_physical{91.0}=0 +phy_chain_rx_polarity_flip_physical{92.0}=0 +phy_chain_tx_lane_map_physical{89.0}=0x3021 +phy_chain_rx_lane_map_physical{89.0}=0x3201 + +#FC 23 +portmap_41=93:100 +phy_chain_tx_polarity_flip_physical{93.0}=0 +phy_chain_tx_polarity_flip_physical{94.0}=0 +phy_chain_tx_polarity_flip_physical{95.0}=1 +phy_chain_tx_polarity_flip_physical{96.0}=0 +phy_chain_rx_polarity_flip_physical{93.0}=1 +phy_chain_rx_polarity_flip_physical{94.0}=0 +phy_chain_rx_polarity_flip_physical{95.0}=1 +phy_chain_rx_polarity_flip_physical{96.0}=0 +phy_chain_tx_lane_map_physical{93.0}=0x1023 +phy_chain_rx_lane_map_physical{93.0}=0x1032 + +#FC 24 +portmap_42=97:100 +phy_chain_tx_polarity_flip_physical{97.0}=0 +phy_chain_tx_polarity_flip_physical{98.0}=1 +phy_chain_tx_polarity_flip_physical{99.0}=1 +phy_chain_tx_polarity_flip_physical{100.0}=0 +phy_chain_rx_polarity_flip_physical{97.0}=0 +phy_chain_rx_polarity_flip_physical{98.0}=0 +phy_chain_rx_polarity_flip_physical{99.0}=0 +phy_chain_rx_polarity_flip_physical{100.0}=1 +phy_chain_tx_lane_map_physical{97.0}=0x0132 +phy_chain_rx_lane_map_physical{97.0}=0x1320 + +#FC 25 +portmap_43=101:100 +phy_chain_tx_polarity_flip_physical{101.0}=0 +phy_chain_tx_polarity_flip_physical{102.0}=1 +phy_chain_tx_polarity_flip_physical{103.0}=1 +phy_chain_tx_polarity_flip_physical{104.0}=1 +phy_chain_rx_polarity_flip_physical{101.0}=1 +phy_chain_rx_polarity_flip_physical{102.0}=1 +phy_chain_rx_polarity_flip_physical{103.0}=1 +phy_chain_rx_polarity_flip_physical{104.0}=1 +phy_chain_tx_lane_map_physical{101.0}=0x1023 +phy_chain_rx_lane_map_physical{101.0}=0x3120 + +#FC 26 +portmap_44=105:100 +phy_chain_tx_polarity_flip_physical{105.0}=1 +phy_chain_tx_polarity_flip_physical{106.0}=0 +phy_chain_tx_polarity_flip_physical{107.0}=1 +phy_chain_tx_polarity_flip_physical{108.0}=1 +phy_chain_rx_polarity_flip_physical{105.0}=1 +phy_chain_rx_polarity_flip_physical{106.0}=1 +phy_chain_rx_polarity_flip_physical{107.0}=0 +phy_chain_rx_polarity_flip_physical{108.0}=0 +phy_chain_tx_lane_map_physical{105.0}=0x2103 +phy_chain_rx_lane_map_physical{105.0}=0x1203 + +#FC 27 +portmap_45=109:100 +phy_chain_tx_polarity_flip_physical{109.0}=1 +phy_chain_tx_polarity_flip_physical{110.0}=1 +phy_chain_tx_polarity_flip_physical{111.0}=0 +phy_chain_tx_polarity_flip_physical{112.0}=1 +phy_chain_rx_polarity_flip_physical{109.0}=0 +phy_chain_rx_polarity_flip_physical{110.0}=0 +phy_chain_rx_polarity_flip_physical{111.0}=1 +phy_chain_rx_polarity_flip_physical{112.0}=0 +phy_chain_tx_lane_map_physical{109.0}=0x3201 +phy_chain_rx_lane_map_physical{109.0}=0x0123 + +#FC 28 +portmap_46=113:100 +phy_chain_tx_polarity_flip_physical{113.0}=0 +phy_chain_tx_polarity_flip_physical{114.0}=1 +phy_chain_tx_polarity_flip_physical{115.0}=1 +phy_chain_tx_polarity_flip_physical{116.0}=0 +phy_chain_rx_polarity_flip_physical{113.0}=1 +phy_chain_rx_polarity_flip_physical{114.0}=0 +phy_chain_rx_polarity_flip_physical{115.0}=0 +phy_chain_rx_polarity_flip_physical{116.0}=1 +phy_chain_tx_lane_map_physical{113.0}=0x3012 +phy_chain_rx_lane_map_physical{113.0}=0x1302 + +#FC 29 +portmap_47=117:100 +phy_chain_tx_polarity_flip_physical{117.0}=1 +phy_chain_tx_polarity_flip_physical{118.0}=1 +phy_chain_tx_polarity_flip_physical{119.0}=0 +phy_chain_tx_polarity_flip_physical{120.0}=0 +phy_chain_rx_polarity_flip_physical{117.0}=1 +phy_chain_rx_polarity_flip_physical{118.0}=0 +phy_chain_rx_polarity_flip_physical{119.0}=0 +phy_chain_rx_polarity_flip_physical{120.0}=1 +phy_chain_tx_lane_map_physical{117.0}=0x0312 +phy_chain_rx_lane_map_physical{117.0}=0x0132 + +#FC 30 +portmap_48=121:100 +phy_chain_tx_polarity_flip_physical{121.0}=1 +phy_chain_tx_polarity_flip_physical{122.0}=0 +phy_chain_tx_polarity_flip_physical{123.0}=0 +phy_chain_tx_polarity_flip_physical{124.0}=0 +phy_chain_rx_polarity_flip_physical{121.0}=1 +phy_chain_rx_polarity_flip_physical{122.0}=1 +phy_chain_rx_polarity_flip_physical{123.0}=0 +phy_chain_rx_polarity_flip_physical{124.0}=0 +phy_chain_tx_lane_map_physical{121.0}=0x1023 +phy_chain_rx_lane_map_physical{121.0}=0x1203 + +#FC 31 +portmap_49=125:100 +phy_chain_tx_polarity_flip_physical{125.0}=0 +phy_chain_tx_polarity_flip_physical{126.0}=1 +phy_chain_tx_polarity_flip_physical{127.0}=0 +phy_chain_tx_polarity_flip_physical{128.0}=1 +phy_chain_rx_polarity_flip_physical{125.0}=0 +phy_chain_rx_polarity_flip_physical{126.0}=0 +phy_chain_rx_polarity_flip_physical{127.0}=1 +phy_chain_rx_polarity_flip_physical{128.0}=0 +phy_chain_tx_lane_map_physical{125.0}=0x1320 +phy_chain_rx_lane_map_physical{125.0}=0x2103 + +#PIPE-2 +#FC 32 +portmap_68=129:100 +phy_chain_tx_polarity_flip_physical{129.0}=0 +phy_chain_tx_polarity_flip_physical{130.0}=1 +phy_chain_tx_polarity_flip_physical{131.0}=1 +phy_chain_tx_polarity_flip_physical{132.0}=0 +phy_chain_rx_polarity_flip_physical{129.0}=0 +phy_chain_rx_polarity_flip_physical{130.0}=1 +phy_chain_rx_polarity_flip_physical{131.0}=1 +phy_chain_rx_polarity_flip_physical{132.0}=1 +phy_chain_tx_lane_map_physical{129.0}=0x0321 +phy_chain_rx_lane_map_physical{129.0}=0x2310 + +#FC 33 +portmap_69=133:100 +phy_chain_tx_polarity_flip_physical{133.0}=1 +phy_chain_tx_polarity_flip_physical{134.0}=0 +phy_chain_tx_polarity_flip_physical{135.0}=0 +phy_chain_tx_polarity_flip_physical{136.0}=1 +phy_chain_rx_polarity_flip_physical{133.0}=1 +phy_chain_rx_polarity_flip_physical{134.0}=0 +phy_chain_rx_polarity_flip_physical{135.0}=0 +phy_chain_rx_polarity_flip_physical{136.0}=1 +phy_chain_tx_lane_map_physical{133.0}=0x2013 +phy_chain_rx_lane_map_physical{133.0}=0x1203 + +#FC 34 +portmap_70=137:100 +phy_chain_tx_polarity_flip_physical{137.0}=0 +phy_chain_tx_polarity_flip_physical{138.0}=1 +phy_chain_tx_polarity_flip_physical{139.0}=0 +phy_chain_tx_polarity_flip_physical{140.0}=0 +phy_chain_rx_polarity_flip_physical{137.0}=0 +phy_chain_rx_polarity_flip_physical{138.0}=1 +phy_chain_rx_polarity_flip_physical{139.0}=1 +phy_chain_rx_polarity_flip_physical{140.0}=0 +phy_chain_tx_lane_map_physical{137.0}=0x2301 +phy_chain_rx_lane_map_physical{137.0}=0x0213 + +#FC 35 +portmap_71=141:100 +phy_chain_tx_polarity_flip_physical{141.0}=0 +phy_chain_tx_polarity_flip_physical{142.0}=1 +phy_chain_tx_polarity_flip_physical{143.0}=0 +phy_chain_tx_polarity_flip_physical{144.0}=1 +phy_chain_rx_polarity_flip_physical{141.0}=0 +phy_chain_rx_polarity_flip_physical{142.0}=0 +phy_chain_rx_polarity_flip_physical{143.0}=0 +phy_chain_rx_polarity_flip_physical{144.0}=1 +phy_chain_tx_lane_map_physical{141.0}=0x2013 +phy_chain_rx_lane_map_physical{141.0}=0x2310 + +#FC 36 +portmap_72=145:100 +phy_chain_tx_polarity_flip_physical{145.0}=1 +phy_chain_tx_polarity_flip_physical{146.0}=0 +phy_chain_tx_polarity_flip_physical{147.0}=1 +phy_chain_tx_polarity_flip_physical{148.0}=0 +phy_chain_rx_polarity_flip_physical{145.0}=1 +phy_chain_rx_polarity_flip_physical{146.0}=0 +phy_chain_rx_polarity_flip_physical{147.0}=0 +phy_chain_rx_polarity_flip_physical{148.0}=1 +phy_chain_tx_lane_map_physical{145.0}=0x2310 +phy_chain_rx_lane_map_physical{145.0}=0x0231 + +#FC 37 +portmap_73=149:100 +phy_chain_tx_polarity_flip_physical{149.0}=1 +phy_chain_tx_polarity_flip_physical{150.0}=1 +phy_chain_tx_polarity_flip_physical{151.0}=0 +phy_chain_tx_polarity_flip_physical{152.0}=0 +phy_chain_rx_polarity_flip_physical{149.0}=1 +phy_chain_rx_polarity_flip_physical{150.0}=0 +phy_chain_rx_polarity_flip_physical{151.0}=0 +phy_chain_rx_polarity_flip_physical{152.0}=1 +phy_chain_tx_lane_map_physical{149.0}=0x3021 +phy_chain_rx_lane_map_physical{149.0}=0x1203 + +#FC 38 +portmap_74=153:100 +phy_chain_tx_polarity_flip_physical{153.0}=1 +phy_chain_tx_polarity_flip_physical{154.0}=0 +phy_chain_tx_polarity_flip_physical{155.0}=1 +phy_chain_tx_polarity_flip_physical{156.0}=1 +phy_chain_rx_polarity_flip_physical{153.0}=0 +phy_chain_rx_polarity_flip_physical{154.0}=0 +phy_chain_rx_polarity_flip_physical{155.0}=0 +phy_chain_rx_polarity_flip_physical{156.0}=0 +phy_chain_tx_lane_map_physical{153.0}=0x1230 +phy_chain_rx_lane_map_physical{153.0}=0x3120 + +#FC 39 +portmap_75=157:100 +phy_chain_tx_polarity_flip_physical{157.0}=1 +phy_chain_tx_polarity_flip_physical{158.0}=1 +phy_chain_tx_polarity_flip_physical{159.0}=1 +phy_chain_tx_polarity_flip_physical{160.0}=0 +phy_chain_rx_polarity_flip_physical{157.0}=0 +phy_chain_rx_polarity_flip_physical{158.0}=0 +phy_chain_rx_polarity_flip_physical{159.0}=1 +phy_chain_rx_polarity_flip_physical{160.0}=0 +phy_chain_tx_lane_map_physical{157.0}=0x3210 +phy_chain_rx_lane_map_physical{157.0}=0x3210 + +#FC 40 +portmap_76=161:100 +phy_chain_tx_polarity_flip_physical{161.0}=1 +phy_chain_tx_polarity_flip_physical{162.0}=1 +phy_chain_tx_polarity_flip_physical{163.0}=0 +phy_chain_tx_polarity_flip_physical{164.0}=1 +phy_chain_rx_polarity_flip_physical{161.0}=1 +phy_chain_rx_polarity_flip_physical{162.0}=1 +phy_chain_rx_polarity_flip_physical{163.0}=1 +phy_chain_rx_polarity_flip_physical{164.0}=1 +phy_chain_tx_lane_map_physical{161.0}=0x2031 +phy_chain_rx_lane_map_physical{161.0}=0x1032 + +#FC 41 +portmap_77=165:100 +phy_chain_tx_polarity_flip_physical{165.0}=0 +phy_chain_tx_polarity_flip_physical{166.0}=0 +phy_chain_tx_polarity_flip_physical{167.0}=1 +phy_chain_tx_polarity_flip_physical{168.0}=1 +phy_chain_rx_polarity_flip_physical{165.0}=0 +phy_chain_rx_polarity_flip_physical{166.0}=1 +phy_chain_rx_polarity_flip_physical{167.0}=0 +phy_chain_rx_polarity_flip_physical{168.0}=1 +phy_chain_tx_lane_map_physical{165.0}=0x2310 +phy_chain_rx_lane_map_physical{165.0}=0x1230 + +#FC 42 +portmap_78=169:100 +phy_chain_tx_polarity_flip_physical{169.0}=1 +phy_chain_tx_polarity_flip_physical{170.0}=0 +phy_chain_tx_polarity_flip_physical{171.0}=1 +phy_chain_tx_polarity_flip_physical{172.0}=0 +phy_chain_rx_polarity_flip_physical{169.0}=0 +phy_chain_rx_polarity_flip_physical{170.0}=0 +phy_chain_rx_polarity_flip_physical{171.0}=0 +phy_chain_rx_polarity_flip_physical{172.0}=0 +phy_chain_tx_lane_map_physical{169.0}=0x1302 +phy_chain_rx_lane_map_physical{169.0}=0x3210 + +#FC 43 +portmap_79=173:100 +phy_chain_tx_polarity_flip_physical{173.0}=1 +phy_chain_tx_polarity_flip_physical{174.0}=0 +phy_chain_tx_polarity_flip_physical{175.0}=0 +phy_chain_tx_polarity_flip_physical{176.0}=0 +phy_chain_rx_polarity_flip_physical{173.0}=0 +phy_chain_rx_polarity_flip_physical{174.0}=1 +phy_chain_rx_polarity_flip_physical{175.0}=0 +phy_chain_rx_polarity_flip_physical{176.0}=1 +phy_chain_tx_lane_map_physical{173.0}=0x0312 +phy_chain_rx_lane_map_physical{173.0}=0x3210 + +#FC 44 +portmap_80=177:100 +phy_chain_tx_polarity_flip_physical{177.0}=0 +phy_chain_tx_polarity_flip_physical{178.0}=1 +phy_chain_tx_polarity_flip_physical{179.0}=0 +phy_chain_tx_polarity_flip_physical{180.0}=1 +phy_chain_rx_polarity_flip_physical{177.0}=1 +phy_chain_rx_polarity_flip_physical{178.0}=1 +phy_chain_rx_polarity_flip_physical{179.0}=0 +phy_chain_rx_polarity_flip_physical{180.0}=1 +phy_chain_tx_lane_map_physical{177.0}=0x2031 +phy_chain_rx_lane_map_physical{177.0}=0x1302 + +#FC 45 +portmap_81=181:100 +phy_chain_tx_polarity_flip_physical{181.0}=0 +phy_chain_tx_polarity_flip_physical{182.0}=0 +phy_chain_tx_polarity_flip_physical{183.0}=0 +phy_chain_tx_polarity_flip_physical{184.0}=0 +phy_chain_rx_polarity_flip_physical{181.0}=0 +phy_chain_rx_polarity_flip_physical{182.0}=1 +phy_chain_rx_polarity_flip_physical{183.0}=0 +phy_chain_rx_polarity_flip_physical{184.0}=1 +phy_chain_tx_lane_map_physical{181.0}=0x1023 +phy_chain_rx_lane_map_physical{181.0}=0x2301 + +#FC 46 +portmap_82=185:100 +phy_chain_tx_polarity_flip_physical{185.0}=0 +phy_chain_tx_polarity_flip_physical{186.0}=0 +phy_chain_tx_polarity_flip_physical{187.0}=1 +phy_chain_tx_polarity_flip_physical{188.0}=0 +phy_chain_rx_polarity_flip_physical{185.0}=0 +phy_chain_rx_polarity_flip_physical{186.0}=0 +phy_chain_rx_polarity_flip_physical{187.0}=0 +phy_chain_rx_polarity_flip_physical{188.0}=0 +phy_chain_tx_lane_map_physical{185.0}=0x1320 +phy_chain_rx_lane_map_physical{185.0}=0x3210 + +#FC 47 +portmap_83=189:100 +phy_chain_tx_polarity_flip_physical{189.0}=1 +phy_chain_tx_polarity_flip_physical{190.0}=1 +phy_chain_tx_polarity_flip_physical{191.0}=0 +phy_chain_tx_polarity_flip_physical{192.0}=1 +phy_chain_rx_polarity_flip_physical{189.0}=0 +phy_chain_rx_polarity_flip_physical{190.0}=1 +phy_chain_rx_polarity_flip_physical{191.0}=0 +phy_chain_rx_polarity_flip_physical{192.0}=1 +phy_chain_tx_lane_map_physical{189.0}=0x3021 +phy_chain_rx_lane_map_physical{189.0}=0x3210 + +#PIPE-3 +#FC 48 +portmap_102=193:100 +phy_chain_tx_polarity_flip_physical{193.0}=1 +phy_chain_tx_polarity_flip_physical{194.0}=0 +phy_chain_tx_polarity_flip_physical{195.0}=1 +phy_chain_tx_polarity_flip_physical{196.0}=0 +phy_chain_rx_polarity_flip_physical{193.0}=1 +phy_chain_rx_polarity_flip_physical{194.0}=1 +phy_chain_rx_polarity_flip_physical{195.0}=0 +phy_chain_rx_polarity_flip_physical{196.0}=1 +phy_chain_tx_lane_map_physical{193.0}=0x3021 +phy_chain_rx_lane_map_physical{193.0}=0x1302 + +#FC 49 +portmap_103=197:100 +phy_chain_tx_polarity_flip_physical{197.0}=1 +phy_chain_tx_polarity_flip_physical{198.0}=0 +phy_chain_tx_polarity_flip_physical{199.0}=0 +phy_chain_tx_polarity_flip_physical{200.0}=1 +phy_chain_rx_polarity_flip_physical{197.0}=0 +phy_chain_rx_polarity_flip_physical{198.0}=1 +phy_chain_rx_polarity_flip_physical{199.0}=0 +phy_chain_rx_polarity_flip_physical{200.0}=1 +phy_chain_tx_lane_map_physical{197.0}=0x0132 +phy_chain_rx_lane_map_physical{197.0}=0x2301 + +#FC 50 +portmap_104=201:100 +phy_chain_tx_polarity_flip_physical{201.0}=1 +phy_chain_tx_polarity_flip_physical{202.0}=0 +phy_chain_tx_polarity_flip_physical{203.0}=1 +phy_chain_tx_polarity_flip_physical{204.0}=1 +phy_chain_rx_polarity_flip_physical{201.0}=0 +phy_chain_rx_polarity_flip_physical{202.0}=0 +phy_chain_rx_polarity_flip_physical{203.0}=0 +phy_chain_rx_polarity_flip_physical{204.0}=0 +phy_chain_tx_lane_map_physical{201.0}=0x2301 +phy_chain_rx_lane_map_physical{201.0}=0x1230 + +#FC 51 +portmap_105=205:100 +phy_chain_tx_polarity_flip_physical{205.0}=1 +phy_chain_tx_polarity_flip_physical{206.0}=1 +phy_chain_tx_polarity_flip_physical{207.0}=0 +phy_chain_tx_polarity_flip_physical{208.0}=0 +phy_chain_rx_polarity_flip_physical{205.0}=0 +phy_chain_rx_polarity_flip_physical{206.0}=0 +phy_chain_rx_polarity_flip_physical{207.0}=0 +phy_chain_rx_polarity_flip_physical{208.0}=1 +phy_chain_tx_lane_map_physical{205.0}=0x3021 +phy_chain_rx_lane_map_physical{205.0}=0x2130 + +#FC 52 +portmap_106=209:100 +phy_chain_tx_polarity_flip_physical{209.0}=1 +phy_chain_tx_polarity_flip_physical{210.0}=1 +phy_chain_tx_polarity_flip_physical{211.0}=0 +phy_chain_tx_polarity_flip_physical{212.0}=1 +phy_chain_rx_polarity_flip_physical{209.0}=0 +phy_chain_rx_polarity_flip_physical{210.0}=0 +phy_chain_rx_polarity_flip_physical{211.0}=1 +phy_chain_rx_polarity_flip_physical{212.0}=1 +phy_chain_tx_lane_map_physical{209.0}=0x2031 +phy_chain_rx_lane_map_physical{209.0}=0x3021 + +#FC 53 +portmap_107=213:100 +phy_chain_tx_polarity_flip_physical{213.0}=0 +phy_chain_tx_polarity_flip_physical{214.0}=1 +phy_chain_tx_polarity_flip_physical{215.0}=1 +phy_chain_tx_polarity_flip_physical{216.0}=0 +phy_chain_rx_polarity_flip_physical{213.0}=0 +phy_chain_rx_polarity_flip_physical{214.0}=1 +phy_chain_rx_polarity_flip_physical{215.0}=0 +phy_chain_rx_polarity_flip_physical{216.0}=1 +phy_chain_tx_lane_map_physical{213.0}=0x1302 +phy_chain_rx_lane_map_physical{213.0}=0x1032 + +#FC 54 +portmap_108=217:100 +phy_chain_tx_polarity_flip_physical{217.0}=1 +phy_chain_tx_polarity_flip_physical{218.0}=0 +phy_chain_tx_polarity_flip_physical{219.0}=1 +phy_chain_tx_polarity_flip_physical{220.0}=1 +phy_chain_rx_polarity_flip_physical{217.0}=0 +phy_chain_rx_polarity_flip_physical{218.0}=0 +phy_chain_rx_polarity_flip_physical{219.0}=0 +phy_chain_rx_polarity_flip_physical{220.0}=0 +phy_chain_tx_lane_map_physical{217.0}=0x2301 +phy_chain_rx_lane_map_physical{217.0}=0x1230 + +#FC 55 +portmap_109=221:100 +phy_chain_tx_polarity_flip_physical{221.0}=0 +phy_chain_tx_polarity_flip_physical{222.0}=0 +phy_chain_tx_polarity_flip_physical{223.0}=0 +phy_chain_tx_polarity_flip_physical{224.0}=0 +phy_chain_rx_polarity_flip_physical{221.0}=0 +phy_chain_rx_polarity_flip_physical{222.0}=1 +phy_chain_rx_polarity_flip_physical{223.0}=0 +phy_chain_rx_polarity_flip_physical{224.0}=1 +phy_chain_tx_lane_map_physical{221.0}=0x3210 +phy_chain_rx_lane_map_physical{221.0}=0x2310 + +#FC 56 +portmap_110=225:100 +phy_chain_tx_polarity_flip_physical{225.0}=0 +phy_chain_tx_polarity_flip_physical{226.0}=0 +phy_chain_tx_polarity_flip_physical{227.0}=1 +phy_chain_tx_polarity_flip_physical{228.0}=0 +phy_chain_rx_polarity_flip_physical{225.0}=0 +phy_chain_rx_polarity_flip_physical{226.0}=1 +phy_chain_rx_polarity_flip_physical{227.0}=1 +phy_chain_rx_polarity_flip_physical{228.0}=1 +phy_chain_tx_lane_map_physical{225.0}=0x3120 +phy_chain_rx_lane_map_physical{225.0}=0x3021 + +#FC 57 +portmap_111=229:100 +phy_chain_tx_polarity_flip_physical{229.0}=0 +phy_chain_tx_polarity_flip_physical{230.0}=0 +phy_chain_tx_polarity_flip_physical{231.0}=1 +phy_chain_tx_polarity_flip_physical{232.0}=0 +phy_chain_rx_polarity_flip_physical{229.0}=0 +phy_chain_rx_polarity_flip_physical{230.0}=0 +phy_chain_rx_polarity_flip_physical{231.0}=1 +phy_chain_rx_polarity_flip_physical{232.0}=1 +phy_chain_tx_lane_map_physical{229.0}=0x0231 +phy_chain_rx_lane_map_physical{229.0}=0x2031 + +#FC 58 +portmap_112=233:100 +phy_chain_tx_polarity_flip_physical{233.0}=1 +phy_chain_tx_polarity_flip_physical{234.0}=0 +phy_chain_tx_polarity_flip_physical{235.0}=0 +phy_chain_tx_polarity_flip_physical{236.0}=0 +phy_chain_rx_polarity_flip_physical{233.0}=0 +phy_chain_rx_polarity_flip_physical{234.0}=0 +phy_chain_rx_polarity_flip_physical{235.0}=1 +phy_chain_rx_polarity_flip_physical{236.0}=1 +phy_chain_tx_lane_map_physical{233.0}=0x1023 +phy_chain_rx_lane_map_physical{233.0}=0x1203 + +#FC 59 +portmap_113=237:100 +phy_chain_tx_polarity_flip_physical{237.0}=0 +phy_chain_tx_polarity_flip_physical{238.0}=0 +phy_chain_tx_polarity_flip_physical{239.0}=1 +phy_chain_tx_polarity_flip_physical{240.0}=0 +phy_chain_rx_polarity_flip_physical{237.0}=1 +phy_chain_rx_polarity_flip_physical{238.0}=0 +phy_chain_rx_polarity_flip_physical{239.0}=0 +phy_chain_rx_polarity_flip_physical{240.0}=0 +phy_chain_tx_lane_map_physical{237.0}=0x2013 +phy_chain_rx_lane_map_physical{237.0}=0x0213 + +#FC 60 +portmap_114=241:100 +phy_chain_tx_polarity_flip_physical{241.0}=0 +phy_chain_tx_polarity_flip_physical{242.0}=1 +phy_chain_tx_polarity_flip_physical{243.0}=0 +phy_chain_tx_polarity_flip_physical{244.0}=0 +phy_chain_rx_polarity_flip_physical{241.0}=0 +phy_chain_rx_polarity_flip_physical{242.0}=0 +phy_chain_rx_polarity_flip_physical{243.0}=0 +phy_chain_rx_polarity_flip_physical{244.0}=0 +phy_chain_tx_lane_map_physical{241.0}=0x1032 +phy_chain_rx_lane_map_physical{241.0}=0x2310 + +#FC 61 +portmap_115=245:100 +phy_chain_tx_polarity_flip_physical{245.0}=1 +phy_chain_tx_polarity_flip_physical{246.0}=0 +phy_chain_tx_polarity_flip_physical{247.0}=0 +phy_chain_tx_polarity_flip_physical{248.0}=1 +phy_chain_rx_polarity_flip_physical{245.0}=1 +phy_chain_rx_polarity_flip_physical{246.0}=1 +phy_chain_rx_polarity_flip_physical{247.0}=0 +phy_chain_rx_polarity_flip_physical{248.0}=1 +phy_chain_tx_lane_map_physical{245.0}=0x1302 +phy_chain_rx_lane_map_physical{245.0}=0x1302 + +#FC 62 +portmap_116=249:100 +phy_chain_tx_polarity_flip_physical{249.0}=0 +phy_chain_tx_polarity_flip_physical{250.0}=1 +phy_chain_tx_polarity_flip_physical{251.0}=0 +phy_chain_tx_polarity_flip_physical{252.0}=0 +phy_chain_rx_polarity_flip_physical{249.0}=1 +phy_chain_rx_polarity_flip_physical{250.0}=1 +phy_chain_rx_polarity_flip_physical{251.0}=0 +phy_chain_rx_polarity_flip_physical{252.0}=0 +phy_chain_tx_lane_map_physical{249.0}=0x1032 +phy_chain_rx_lane_map_physical{249.0}=0x1203 + +#FC 63 +portmap_117=253:100 +phy_chain_tx_polarity_flip_physical{253.0}=0 +phy_chain_tx_polarity_flip_physical{254.0}=0 +phy_chain_tx_polarity_flip_physical{255.0}=0 +phy_chain_tx_polarity_flip_physical{256.0}=1 +phy_chain_rx_polarity_flip_physical{253.0}=0 +phy_chain_rx_polarity_flip_physical{254.0}=1 +phy_chain_rx_polarity_flip_physical{255.0}=1 +phy_chain_rx_polarity_flip_physical{256.0}=0 +phy_chain_tx_lane_map_physical{253.0}=0x3210 +phy_chain_rx_lane_map_physical{253.0}=0x2103 + + + +#MGMT +portmap_66=257:10 +portmap_100=259:10 +#phy_chain_tx_lane_map_physical{257.0}=0x0123 +#phy_chain_rx_lane_map_physical{257.0}=0x0123 + +#LPBK +portmap_33=260:10 +portmap_67=261:10 +portmap_101=262:10 +portmap_135=263:10 diff --git a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/fancontrol b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/fancontrol index 185ee3a2fc25..489ebeaee95d 100644 --- a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/fancontrol +++ b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/fancontrol @@ -1,7 +1,7 @@ INTERVAL=10 -DEVPATH=hwmon5=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-16/16-002f hwmon1=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-7/7-004d +DEVPATH=hwmon5=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-16/16-002f hwmon2=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-7/7-004d DEVNAME=hwmon5=w83795adg -FCTEMPS=hwmon5/device/pwm2=hwmon1/temp1_input +FCTEMPS=hwmon5/device/pwm2=hwmon2/temp1_input FCFANS=hwmon5/device/pwm2=hwmon5/device/fan7_input hwmon5/device/pwm2=hwmon5/device/fan5_input hwmon5/device/pwm2=hwmon5/device/fan3_input hwmon5/device/pwm2=hwmon5/device/fan1_input MINTEMP=hwmon5/device/pwm2=20 MAXTEMP=hwmon5/device/pwm2=60 diff --git a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/sensors.conf b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/sensors.conf index 361a8b732643..25ab494e1f87 100644 --- a/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/sensors.conf +++ b/device/ingrasys/x86_64-ingrasys_s9200_64x-r0/sensors.conf @@ -10,8 +10,8 @@ chip "jc42-*" chip "w83795adg-*" ignore in0 label in1 "P0V9" - set in1_min 0.90 * 0.97 - set in1_max 0.90 * 1.03 + set in1_min 0.84 * 0.97 + set in1_max 0.96 * 1.03 ignore in2 label in3 "P1V8" set in3_min 1.8 * 0.97 @@ -20,8 +20,8 @@ chip "w83795adg-*" set in4_min 1.0 * 0.97 set in4_max 1.0 * 1.03 label in5 "P0V8" - set in5_min 0.8 * 0.97 - set in5_max 0.8 * 1.03 + set in5_min 0.831 * 0.97 + set in5_max 0.831 * 1.03 ignore in6 ignore in7 ignore in8 diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/fancontrol b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/fancontrol index c131df9df32c..427cc6561c50 100644 --- a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/fancontrol +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/fancontrol @@ -1,5 +1,5 @@ INTERVAL=10 -DEVPATH=hwmon1=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-16/16-002f hwmon3=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-6/6-004e +DEVPATH=hwmon1=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-16/16-002f hwmon3=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-6/6-004c DEVNAME=hwmon1=w83795adg FCTEMPS=hwmon1/device/pwm2=hwmon3/temp1_input FCFANS=hwmon1/device/pwm2=hwmon1/device/fan7_input hwmon1/device/pwm2=hwmon1/device/fan5_input hwmon1/device/pwm2=hwmon1/device/fan3_input hwmon1/device/pwm2=hwmon1/device/fan1_input diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/sensors.conf b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/sensors.conf index ddc04a5f4ad6..0e9f5cd41ba8 100644 --- a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/sensors.conf +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/sensors.conf @@ -66,20 +66,20 @@ chip "lm75-i2c-6-4D" set temp1_max 50 set temp1_max_hyst 45 chip "lm75-i2c-6-4E" - label temp1 "Rear MAC Temp" + label temp1 "Right Side MB Tetmp" set temp1_max 50 set temp1_max_hyst 45 chip "lm86-i2c-6-4C" - label temp1 "MB Temp" + label temp1 "Front Panel Temp" set temp1_max 50 - label temp2 "MAC Temp" + label temp2 "Front MAC Temp" set temp2_max 70 bus "i2c-7" "i2c-0-mux (chan_id 6)" chip "lm75-i2c-7-4D" - label temp1 "Front Panel Temp" + label temp1 "Left Side MB Temp" set temp1_max 50 set temp1_max_hyst 45 chip "lm75-i2c-7-4E" - label temp1 "Front MAC Temp" + label temp1 "Left Side MAC Temp" set temp1_max 50 set temp1_max_hyst 45 diff --git a/platform/barefoot/bfn-platform-ingrasys.mk b/platform/barefoot/bfn-platform-ingrasys.mk index 7f3ba4746572..20dc5f866f38 100644 --- a/platform/barefoot/bfn-platform-ingrasys.mk +++ b/platform/barefoot/bfn-platform-ingrasys.mk @@ -1,5 +1,5 @@ BFN_INGRASYS_PLATFORM = bfnplatform-ingrasys_8.2.0_amd64.deb -$(BFN_INGRASYS_PLATFORM)_URL = "https://github.com/Ingrasys-sonic/packages/raw/master/lib/bfnplatform-ingrasys_8.2.0_amd64.deb" +$(BFN_INGRASYS_PLATFORM)_URL = "https://github.com/Ingrasys-sonic/packages/raw/master/lib/bfnplatform-ingrasys_8.4.0_8.5.0_amd64.deb" SONIC_ONLINE_DEBS += $(BFN_INGRASYS_PLATFORM) # $(BFN_SAI_DEV) $(BFN_SAI_DEV)_DEPENDS += $(BFN_INGRASYS_PLATFORM) diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh index 969ba09f84cb..d8e5778f4b0e 100755 --- a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh @@ -15,7 +15,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -VERSION="1.0.0" +# trun on for more debug output +#DEBUG="on" + +VERSION="1.1.0" TRUE=200 FALSE=404 @@ -104,10 +107,14 @@ PSU_NOT_EXIST=0 rov_val_array=( 0.85 0.82 0.77 0.87 0.74 0.84 0.79 0.89 ) rov_reg_array=( 0x24 0x21 0x1c 0x26 0x19 0x23 0x1e 0x28 ) +#GPIO Offset +GPIO_OFFSET=0 + # Help usage function function _help { echo "=========================================================" echo "# Description: Help Function" + echo "# Version : ${VERSION}" echo "=========================================================" echo "----------------------------------------------------" echo "EX : ${0} help" @@ -130,8 +137,10 @@ function _help { echo " : ${0} i2c_psu_eeprom_init new|delete" echo " : ${0} i2c_qsfp_status_get [1-34]" echo " : ${0} i2c_qsfp_type_get [1-34]" + echo " : ${0} i2c_qsfp_ddm_get [1-34]" echo " : ${0} i2c_board_type_get" echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" echo " : ${0} i2c_led_fan_status_set" echo " : ${0} i2c_led_fan_tray_status_set" echo " : ${0} i2c_cpld_version" @@ -139,6 +148,8 @@ function _help { echo " : ${0} i2c_test_all" echo " : ${0} i2c_sys_led green|amber" echo " : ${0} i2c_fan_led green|amber on|off" + echo " : ${0} i2c_psu1_led green|amber" + echo " : ${0} i2c_psu2_led green|amber" echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" echo "----------------------------------------------------" } @@ -229,11 +240,14 @@ function _i2c_init { _i2c_fan_speed_init _i2c_temp_init modprobe jc42 + rmmod gpio_ich _i2c_gpio_init + modprobe gpio_ich _i2c_mb_eeprom_init "new" _i2c_qsfp_eeprom_init "new" _i2c_sfp_eeprom_init "new" _i2c_psu_eeprom_init "new" + _i2c_led_psu_status_set _i2c_led_fan_status_set _i2c_led_fan_tray_status_set @@ -486,12 +500,28 @@ function _i2c_fan_init { echo "Done" } +# To set the global variable GPIO_OFFSET +function _set_gpio_offset { + GPIO_OFFSET=0 + for d in `ls /sys/class/gpio/ | grep gpiochip` + do + gpiochip_no=${d##gpiochip} + if [ $gpiochip_no -gt 255 ]; then + GPIO_OFFSET=256 + break + fi + done + #echo "set GPIO_OFFSET=${GPIO_OFFSET}" +} + #GPIO Init function _i2c_gpio_init { local i=0 #ABS Port 0-15 echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - for i in {240..255}; + _set_gpio_offset + #for i in {240..255}; + for((i=${GPIO_OFFSET}+240;i<=${GPIO_OFFSET}+255;i++)); do echo $i > /sys/class/gpio/export echo 1 > /sys/class/gpio/gpio${i}/active_low @@ -499,7 +529,8 @@ function _i2c_gpio_init { #ABS Port 16-31 echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - for i in {224..239}; + #for i in {224..239}; + for((i=${GPIO_OFFSET}+224;i<=${GPIO_OFFSET}+239;i++)); do echo $i > /sys/class/gpio/export echo 1 > /sys/class/gpio/gpio${i}/active_low @@ -507,7 +538,8 @@ function _i2c_gpio_init { #INT Port 0-15 echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - for i in {208..223}; + #for i in {208..223}; + for((i=${GPIO_OFFSET}+208;i<=${GPIO_OFFSET}+223;i++)); do echo $i > /sys/class/gpio/export echo 1 > /sys/class/gpio/gpio${i}/active_low @@ -515,7 +547,8 @@ function _i2c_gpio_init { #INT Port 16-31 echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - for i in {192..207}; + #for i in {192..207}; + for((i=${GPIO_OFFSET}+192;i<=${GPIO_OFFSET}+207;i++)); do echo $i > /sys/class/gpio/export echo 1 > /sys/class/gpio/gpio${i}/active_low @@ -523,14 +556,31 @@ function _i2c_gpio_init { #SFP+ echo "pca9535 0x27" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - for i in {176..191}; + #for i in {176..191}; + for((i=${GPIO_OFFSET}+176;i<=${GPIO_OFFSET}+191;i++)); do echo $i > /sys/class/gpio/export case ${i} in - 176|177|178|179|182|183|188|189|190|191) + #176|177|178|179|182|183|188|189|190|191) + $((${GPIO_OFFSET}+176)) | \ + $((${GPIO_OFFSET}+177)) | \ + $((${GPIO_OFFSET}+178)) | \ + $((${GPIO_OFFSET}+179)) | \ + $((${GPIO_OFFSET}+182)) | \ + $((${GPIO_OFFSET}+183)) | \ + $((${GPIO_OFFSET}+188)) | \ + $((${GPIO_OFFSET}+189)) | \ + $((${GPIO_OFFSET}+190)) | \ + $((${GPIO_OFFSET}+191)) ) echo 1 > /sys/class/gpio/gpio${i}/active_low ;; - 180|181|184|185|186|187) + #180|181|184|185|186|187) + $((${GPIO_OFFSET}+180)) | \ + $((${GPIO_OFFSET}+181)) | \ + $((${GPIO_OFFSET}+184)) | \ + $((${GPIO_OFFSET}+185)) | \ + $((${GPIO_OFFSET}+186)) | \ + $((${GPIO_OFFSET}+187)) ) echo out > /sys/class/gpio/gpio${i}/direction ;; esac @@ -571,7 +621,8 @@ function _i2c_gpio_init { #LP Mode Port 0-15 echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device - for i in {160..175}; + #for i in {160..175}; + for((i=${GPIO_OFFSET}+160;i<=${GPIO_OFFSET}+175;i++)); do echo $i > /sys/class/gpio/export echo out > /sys/class/gpio/gpio${i}/direction @@ -579,7 +630,8 @@ function _i2c_gpio_init { #LP Mode Port 16-31 echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device - for i in {144..159}; + #for i in {144..159}; + for((i=${GPIO_OFFSET}+144;i<=${GPIO_OFFSET}+159;i++)); do echo $i > /sys/class/gpio/export echo out > /sys/class/gpio/gpio${i}/direction @@ -587,34 +639,52 @@ function _i2c_gpio_init { #RST Port 0-15 echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device - for i in {128..143}; + #for i in {128..143}; + for((i=${GPIO_OFFSET}+128;i<=${GPIO_OFFSET}+143;i++)); do echo $i > /sys/class/gpio/export - echo out > /sys/class/gpio/gpio${i}/direction echo 1 > /sys/class/gpio/gpio${i}/active_low - echo 0 > /sys/class/gpio/gpio${i}/value + echo low > /sys/class/gpio/gpio${i}/direction + #echo out > /sys/class/gpio/gpio${i}/direction + #echo 0 > /sys/class/gpio/gpio${i}/value done #RST Port 16-31 echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device - for i in {112..127}; + #for i in {112..127}; + for((i=${GPIO_OFFSET}+112;i<=${GPIO_OFFSET}+127;i++)); do echo $i > /sys/class/gpio/export - echo out > /sys/class/gpio/gpio${i}/direction echo 1 > /sys/class/gpio/gpio${i}/active_low - echo 0 > /sys/class/gpio/gpio${i}/value + echo low > /sys/class/gpio/gpio${i}/direction + #echo out > /sys/class/gpio/gpio${i}/direction + #echo 0 > /sys/class/gpio/gpio${i}/value done #PSU I/O on Dummy Board 0x25 echo "pca9535 0x25" > /sys/bus/i2c/devices/i2c-${NUM_I801_DEVICE}/new_device - for i in {96..111}; + #for i in {96..111}; + for((i=${GPIO_OFFSET}+96;i<=${GPIO_OFFSET}+111;i++)); do echo $i > /sys/class/gpio/export case ${i} in - 97|98|100|101|102|105|106|108) + #97|98|100|101|102|105|106|108) + $((${GPIO_OFFSET}+97)) | \ + $((${GPIO_OFFSET}+98)) | \ + $((${GPIO_OFFSET}+100)) | \ + $((${GPIO_OFFSET}+101)) | \ + $((${GPIO_OFFSET}+102)) | \ + $((${GPIO_OFFSET}+105)) | \ + $((${GPIO_OFFSET}+106)) | \ + $((${GPIO_OFFSET}+108)) ) echo 1 > /sys/class/gpio/gpio${i}/active_low ;; - 98|101|106|107|108) + #98|101|106|107|108) + $((${GPIO_OFFSET}+98)) | \ + $((${GPIO_OFFSET}+101)) | \ + $((${GPIO_OFFSET}+106)) | \ + $((${GPIO_OFFSET}+107)) | \ + $((${GPIO_OFFSET}+108)) ) echo out > /sys/class/gpio/gpio${i}/direction ;; esac @@ -623,6 +693,12 @@ function _i2c_gpio_init { #GPIO DeInit function _i2c_gpio_deinit { + for((i=${GPIO_OFFSET}+96;i<=${GPIO_OFFSET}+255;i++)); + do + if [ -e "/sys/class/gpio/gpio${i}" ]; then + echo ${i} > /sys/class/gpio/unexport + fi + done echo "0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device echo "0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device echo "0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device @@ -669,7 +745,7 @@ function _i2c_led_fan_tray_status_set { if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then FAN_TRAY=1 - echo "FAN_TRAY${FAN_TRAY}..." + echo "FAN_TRAY${FAN_TRAY}..." COLOR_SYS_LED="green" ONOFF_LED="on" echo "${COLOR_SYS_LED} ${ONOFF_LED}" @@ -679,8 +755,8 @@ function _i2c_led_fan_tray_status_set { echo "${COLOR_SYS_LED} ${ONOFF_LED}" _i2c_fan_tray_led else - FAN_TRAY=1 - echo "FAN_TRAY${FAN_TRAY}..." + FAN_TRAY=1 + echo "FAN_TRAY${FAN_TRAY}..." COLOR_SYS_LED="green" ONOFF_LED="off" echo "${COLOR_SYS_LED} ${ONOFF_LED}" @@ -692,8 +768,8 @@ function _i2c_led_fan_tray_status_set { fi if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then - FAN_TRAY=2 - echo "FAN_TRAY${FAN_TRAY}..." + FAN_TRAY=2 + echo "FAN_TRAY${FAN_TRAY}..." COLOR_SYS_LED="green" ONOFF_LED="on" echo "${COLOR_SYS_LED} ${ONOFF_LED}" @@ -703,8 +779,8 @@ function _i2c_led_fan_tray_status_set { echo "${COLOR_SYS_LED} ${ONOFF_LED}" _i2c_fan_tray_led else - FAN_TRAY=2 - echo "FAN_TRAY${FAN_TRAY}..." + FAN_TRAY=2 + echo "FAN_TRAY${FAN_TRAY}..." COLOR_SYS_LED="green" ONOFF_LED="off" echo "${COLOR_SYS_LED} ${ONOFF_LED}" @@ -716,8 +792,8 @@ function _i2c_led_fan_tray_status_set { fi if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then - FAN_TRAY=3 - echo "FAN_TRAY${FAN_TRAY}..." + FAN_TRAY=3 + echo "FAN_TRAY${FAN_TRAY}..." COLOR_SYS_LED="green" ONOFF_LED="on" echo "${COLOR_SYS_LED} ${ONOFF_LED}" @@ -727,8 +803,8 @@ function _i2c_led_fan_tray_status_set { echo "${COLOR_SYS_LED} ${ONOFF_LED}" _i2c_fan_tray_led else - FAN_TRAY=3 - echo "FAN_TRAY${FAN_TRAY}..." + FAN_TRAY=3 + echo "FAN_TRAY${FAN_TRAY}..." COLOR_SYS_LED="green" ONOFF_LED="off" echo "${COLOR_SYS_LED} ${ONOFF_LED}" @@ -740,8 +816,8 @@ function _i2c_led_fan_tray_status_set { fi if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then - FAN_TRAY=4 - echo "FAN_TRAY${FAN_TRAY}..." + FAN_TRAY=4 + echo "FAN_TRAY${FAN_TRAY}..." COLOR_SYS_LED="green" ONOFF_LED="on" echo "${COLOR_SYS_LED} ${ONOFF_LED}" @@ -751,8 +827,8 @@ function _i2c_led_fan_tray_status_set { echo "${COLOR_SYS_LED} ${ONOFF_LED}" _i2c_fan_tray_led else - FAN_TRAY=4 - echo "FAN_TRAY${FAN_TRAY}..." + FAN_TRAY=4 + echo "FAN_TRAY${FAN_TRAY}..." COLOR_SYS_LED="green" ONOFF_LED="off" echo "${COLOR_SYS_LED} ${ONOFF_LED}" @@ -814,43 +890,50 @@ function _qsfp_port_i2c_var_set { regAddr=0x20 dataAddr=0 eeprombusbase=${NUM_MUX3_CHAN0_DEVICE} - gpioBase=240 + gpioBase=$((${GPIO_OFFSET}+240)) + #gpioBase=240 ;; 9|10|11|12|13|14|15|16) i2cbus=${NUM_MUX1_CHAN4_DEVICE} regAddr=0x20 dataAddr=1 eeprombusbase=${NUM_MUX4_CHAN0_DEVICE} - gpioBase=240 + gpioBase=$((${GPIO_OFFSET}+240)) + #gpioBase=240 ;; 17|18|19|20|21|22|23|24) i2cbus=${NUM_MUX1_CHAN4_DEVICE} regAddr=0x21 dataAddr=0 eeprombusbase=${NUM_MUX5_CHAN0_DEVICE} - gpioBase=$((224 - 16)) + gpioBase=$((${GPIO_OFFSET}+224-16)) + #gpioBase=$((224 - 16)) ;; 25|26|27|28|29|30|31|32) i2cbus=${NUM_MUX1_CHAN4_DEVICE} regAddr=0x21 dataAddr=1 eeprombusbase=${NUM_MUX6_CHAN0_DEVICE} - gpioBase=$((224 - 16)) + gpioBase=$((${GPIO_OFFSET}+224-16)) + #gpioBase=$((224 - 16)) ;; 33) i2cbus=${NUM_MUX1_CHAN7_DEVICE} regAddr=0x27 dataAddr=0 - gpioBase=145 + gpioBase=$((${GPIO_OFFSET}+145)) + #gpioBase=145 ;; 34) i2cbus=${NUM_MUX1_CHAN7_DEVICE} regAddr=0x27 dataAddr=1 - gpioBase=143 + gpioBase=$((${GPIO_OFFSET}+143)) + #gpioBase=143 ;; *) echo "Please input 1~34" + exit ;; esac } @@ -1046,8 +1129,10 @@ function _i2c_sfp_eeprom_init { if [ "${action}" == "new" ] && \ ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP1_DEVICE}-0050 ] && \ ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP2_DEVICE}-0050 ]; then - echo "sff8436 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP1_DEVICE}/new_device - echo "sff8436 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP2_DEVICE}/new_device + #echo "sff8436 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP1_DEVICE}/new_device + #echo "sff8436 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP2_DEVICE}/new_device + echo "optoe1 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP1_DEVICE}/new_device + echo "optoe1 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP2_DEVICE}/new_device elif [ "${action}" == "delete" ] && \ [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP1_DEVICE}-0050 ] && \ [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP2_DEVICE}-0050 ]; then @@ -1097,7 +1182,10 @@ function _i2c_qsfp_type_get { _qsfp_eeprom_var_set ${QSFP_PORT} #Get QSFP EEPROM info - qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom) + local size=255 + eeprom_path="${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom" + #echo "get ${eeprom_path}" + qsfp_info=$(dd if=${eeprom_path} bs=${size} count=1 2>/dev/null | base64) identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') @@ -1182,6 +1270,7 @@ function _i2c_port_led_set { ;; *) echo "Please input 1~34" + exit ;; esac @@ -1251,12 +1340,12 @@ function _i2c_psu_eeprom_get { function _i2c_sys_led { if [ "${COLOR_SYS_LED}" == "green" ]; then - # set sys_led_g (0.7) = 1 + # set sys_led_g (0.0) = 1 output_reg=2 mask=0x01 value=0x01 elif [ "${COLOR_SYS_LED}" == "amber" ]; then - # set sys_led_g (0.7) = 0 + # set sys_led_g (0.0) = 0 output_reg=2 mask=0x01 value=0x00 @@ -1353,24 +1442,186 @@ function _i2c_fan_led { echo "done..." } +#Set PSU1 LED +function _i2c_psu1_led { + local value=0 + local mask=8 + + if [ "${COLOR_SYS_LED}" == "green" ]; then + value=0x00 + elif [ "${COLOR_SYS_LED}" == "amber" ]; then + value=0xFF + else + echo "Invalid Parameters ${COLOR_SYS_LED}, Exit!!!" + _help + exit ${FALSE} + fi + + i2cset -m ${mask} -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 2 ${value} +} + +#Set PSU2 LED +function _i2c_psu2_led { + local value=0 + local mask=16 + + if [ "${COLOR_SYS_LED}" == "green" ]; then + value=0x00 + elif [ "${COLOR_SYS_LED}" == "amber" ]; then + value=0xFF + else + echo "Invalid Parameters ${COLOR_SYS_LED}, Exit!!!" + _help + exit ${FALSE} + fi + + i2cset -m ${mask} -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 2 ${value} +} #Get PSU Status function _i2c_psu_status { - psu2PwGood=`cat /sys/class/gpio/gpio96/value` # PSU0_PWROK (0.0) - psu2Exist=`cat /sys/class/gpio/gpio97/value` # PSU0_PRSNT_L (0.1) + psu1_pwgood_gpio=$((${GPIO_OFFSET}+99)) + psu1_exist_gpio=$((${GPIO_OFFSET}+100)) + psu2_pwdgood_gpio=$((${GPIO_OFFSET}+96)) + psu2_exist_gpio=$((${GPIO_OFFSET}+97)) - psu1PwGood=`cat /sys/class/gpio/gpio99/value` # PSU1_PWROK (0.3) - psu1Exist=`cat /sys/class/gpio/gpio100/value` # PSU1_PRSNT_L (0.4) + psu2PwGood=`cat /sys/class/gpio/gpio${psu2_pwdgood_gpio}/value` # PSU0_PWROK (0.0) + psu2Exist=`cat /sys/class/gpio/gpio${psu2_exist_gpio}/value` # PSU0_PRSNT_L (0.1) + + psu1PwGood=`cat /sys/class/gpio/gpio${psu1_pwgood_gpio}/value` # PSU1_PWROK (0.3) + psu1Exist=`cat /sys/class/gpio/gpio${psu1_exist_gpio}/value` # PSU1_PRSNT_L (0.4) printf "PSU1 Exist:%d PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood } +# util function to get logx value +function logx { + v=$1 + n=$2 + logx_res=$(echo "${v} ${n}" | awk '{printf "%f\n",log($1)/log($2)}') +} + +#Set PSU LED on LED Board +function _i2c_led_psu_status_set { + + echo "=========================================================" + echo "# Description: PSU LED Status Setup" + echo "=========================================================" + + #Get PSU Status + _i2c_psu_status + + #PSU1 Status + echo "------------------------------" + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_SYS_LED="green" + _i2c_psu1_led + else + COLOR_SYS_LED="amber" + _i2c_psu1_led + fi + else + COLOR_SYS_LED="amber" + _i2c_psu1_led + fi + echo "set [PSU1 LED] = ${COLOR_SYS_LED}" + + #PSU2 Status + echo "------------------------------" + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_SYS_LED="green" + _i2c_psu2_led + else + COLOR_SYS_LED="amber" + #ONOFF_LED="on" + _i2c_psu2_led + fi + else + COLOR_SYS_LED="amber" + _i2c_psu2_led + fi + echo "set [PSU2 LED] = ${COLOR_SYS_LED}" +} + +# get qsfp ddm data +function _i2c_qsfp_ddm_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + # check if port presence + #status: 0 -> Down, 1 -> Up + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) ^ 1)) ))/value` + if [ "${status}" == "0" ]; then + echo "port ${QSFP_PORT} not presence" + return + fi + + _qsfp_eeprom_var_set ${QSFP_PORT} + + # Get QSFP EEPROM info + # only need first 128 bytes (page0) for ddm parsing + local size=128 + eeprom_path="${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom" + #echo "get ${eeprom_path}" + qsfp_info=$(dd if=${eeprom_path} bs=${size} count=1 2>/dev/null | base64) + + # temperature + temp_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s 22 -n 1 -e '"%d"') + temp_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s 23 -n 1 -e '"%d"') + temp=$(echo "$temp_val1 $temp_val2" | awk '{printf "%f\n", $1 + $2/256.0}') + #temp=$(( ${temp_val1} + ${temp_val2}/256.0 )) + echo "temp=$temp" + # voltage + volt_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s 26 -n 1 -e '"%d"') + volt_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s 27 -n 1 -e '"%d"') + #volt=$(((($volt_val1 << 8) | volt_val2) / 10000)) + volt_val3=$(( ($volt_val1 << 8) | $volt_val2 )) + volt=$(echo "$volt_val3" | awk '{printf "%f\n", $1/10000.0}') + echo "volt=$volt" + + # 4 channels + for i in {0..3}; + do + echo "channel $i:" + # txBias + offset=$(( 42 + $i*2 )) + txBias_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + offset=$(( 43 + $i*2 )) + txBias_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + txBias_val3=$(( ($txBias_val1 << 8) | $txBias_val2 )) + txBias=$(echo "$txBias_val3" | awk '{printf "%f\n", (131.0*$1)/65535}') + echo " txBias=$txBias" + # txPower + offset=$(( 50 + $i*2 )) + txPower_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + offset=$(( 51 + $i*2 )) + txPower_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + txPower_val3=$(( ($txPower_val1 << 8) | $txPower_val2 )) + txPower_val4=$(echo "$txPower_val3" | awk '{printf "%f\n", $1*0.0001}') + logx $txPower_val4 10 + txPower=$(echo "$logx_res" | awk '{printf "%f\n", $1*10}') + echo " txPower=$txPower" + # rxPower + offset=$(( 34 + $i*2 )) + rxPower_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + offset=$(( 35 + $i*2 )) + rxPower_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + rxPower_val3=$(( ($rxPower_val1 << 8) | $rxPower_val2 )) + rxPower_val4=$(echo "$rxPower_val3" | awk '{printf "%f\n", $1*0.0001}') + logx $rxPower_val4 10 + rxPower=$(echo "$logx_res" | awk '{printf "%f\n", $1*10}') + echo " rxPower=$rxPower" + done +} #Main Function function _main { start_time_str=`date` start_time_sec=$(date +%s) + _set_gpio_offset if [ "${EXEC_FUNC}" == "help" ]; then _help elif [ "${EXEC_FUNC}" == "i2c_init" ]; then @@ -1411,6 +1662,10 @@ function _main { _i2c_qsfp_status_get elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_qsfp_ddm_get" ]; then + _i2c_qsfp_ddm_get elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then _i2c_led_fan_status_set elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then @@ -1421,6 +1676,10 @@ function _main { _i2c_fan_led elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then _i2c_board_type_get elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then @@ -1446,14 +1705,17 @@ function _main { exit ${FALSE} fi - end_time_str=`date` - end_time_sec=$(date +%s) - diff_time=$[ ${end_time_sec} - ${start_time_sec} ] - echo "Start Time: ${start_time_str} (${start_time_sec})" - echo "End Time : ${end_time_str} (${end_time_sec})" - echo "Total Execution Time: ${diff_time} sec" + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" - echo "done!!!" + echo "done!!!" + fi } _main diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/i2c_utils.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/i2c_utils.sh index fcb7b6372efa..dcd7bf717339 100755 --- a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/i2c_utils.sh +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/i2c_utils.sh @@ -322,6 +322,7 @@ function _help { echo " : ${0} i2c_sfp_status_get [${MIN_SFP_PORT_NUM}-${MAX_SFP_PORT_NUM}]" echo " : ${0} i2c_qsfp_type_get [${MIN_QSFP_PORT_NUM}-${MAX_QSFP_PORT_NUM}]" echo " : ${0} i2c_sfp_type_get [${MIN_SFP_PORT_NUM}-${MAX_SFP_PORT_NUM}]" + echo " : ${0} i2c_qsfp_ddm_get [${MIN_QSFP_PORT_NUM}-${MAX_QSFP_PORT_NUM}]" echo " : ${0} i2c_board_type_get" echo " : ${0} i2c_bmc_board_type_get" echo " : ${0} i2c_cpld_version" @@ -945,7 +946,7 @@ function _i2c_led_test { #Turn OFF All LED (can't trun off system led) COLOR_LED="off" - _i2c_sys_led + #_i2c_sys_led _i2c_fan_led _i2c_psu1_led _i2c_psu2_led @@ -962,7 +963,6 @@ function _qsfp_cpld_var_set { local reg_port_base local reg_port_shift - echo "_qsfp_cpld_var_set port=$port" if [[ $1 -le 12 && $1 -ge 1 ]]; then cpld_index=1 reg_port_base=0 @@ -1068,7 +1068,7 @@ function _i2c_qsfp_eeprom_get { local phy_port=0 # input parameter validation - _util_input_check ${QSFP_PORT} ${MIN_QSFP_PORT_NUM} ${MAX_QSFP_PORT_NUM} + _util_input_check "${QSFP_PORT}" "${MIN_QSFP_PORT_NUM}" "${MAX_QSFP_PORT_NUM}" #get physical port phy_port=$(_port_fp2phy $QSFP_PORT) @@ -1112,8 +1112,8 @@ function _i2c_qsfp_eeprom_init { if [ "${action}" == "new" ] && \ ! [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then - echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device - #echo "optoe1 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + #echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + echo "optoe1 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device elif [ "${action}" == "delete" ] && \ [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/delete_device @@ -1126,7 +1126,7 @@ function _i2c_qsfp_eeprom_init { function _i2c_sfp_eeprom_get { # input parameter validation - _util_input_check ${SFP_PORT} ${MIN_SFP_PORT_NUM} ${MAX_SFP_PORT_NUM} + _util_input_check "${SFP_PORT}" "${MIN_SFP_PORT_NUM}" "${MAX_SFP_PORT_NUM}" _util_get_sfp_pres if [ $status = 0 ]; then @@ -1160,8 +1160,8 @@ function _i2c_sfp_eeprom_init { if [ "${action}" == "new" ] && \ ! [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then - echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device - #echo "optoe1 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + #echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + echo "optoe1 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device elif [ "${action}" == "delete" ] && \ [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/delete_device @@ -1242,7 +1242,7 @@ function _i2c_psu_deinit { function _i2c_qsfp_status_get { # input parameter validation - _util_input_check ${QSFP_PORT} ${MIN_QSFP_PORT_NUM} ${MAX_QSFP_PORT_NUM} + _util_input_check "${QSFP_PORT}" "${MIN_QSFP_PORT_NUM}" "${MAX_QSFP_PORT_NUM}" local stat _util_get_qsfp_abs @@ -1256,12 +1256,15 @@ function _i2c_qsfp_type_get { phy_port=$(_port_fp2phy ${QSFP_PORT}) # input parameter validation - _util_input_check ${QSFP_PORT} ${MIN_QSFP_PORT_NUM} ${MAX_QSFP_PORT_NUM} + _util_input_check "${QSFP_PORT}" "${MIN_QSFP_PORT_NUM}" "${MAX_QSFP_PORT_NUM}" _qsfp_eeprom_var_set ${phy_port} #Get QSFP EEPROM info - qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom) + local size=255 + eeprom_path="${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom" + #echo "get ${eeprom_path}" + qsfp_info=$(dd if=${eeprom_path} bs=${size} count=1 2>/dev/null | base64) identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') @@ -1275,7 +1278,7 @@ function _i2c_qsfp_type_get { function _i2c_sfp_status_get { # input parameter validation - _util_input_check ${SFP_PORT} ${MIN_SFP_PORT_NUM} ${MAX_SFP_PORT_NUM} + _util_input_check "${SFP_PORT}" "${MIN_SFP_PORT_NUM}" "${MAX_SFP_PORT_NUM}" local stat _util_get_sfp_pres @@ -1292,7 +1295,7 @@ function _i2c_sfp_status_get { function _i2c_sfp_type_get { # input parameter validation - _util_input_check ${SFP_PORT} ${MIN_SFP_PORT_NUM} ${MAX_SFP_PORT_NUM} + _util_input_check "${SFP_PORT}" "${MIN_SFP_PORT_NUM}" "${MAX_SFP_PORT_NUM}" _sfp_eeprom_var_set ${SFP_PORT} @@ -1653,8 +1656,6 @@ function _i2c_cpld_reg_read { reg_file_path="${PATH_SYS_I2C_DEVICES}/${cpld_i2c_bus}-$(printf "%04x" ${cpld_i2c_addr})/${file_name}" cpld_reg_val=`cat ${reg_file_path}` - # TODO: debug - echo "cat ${reg_file_path} => ${cpld_reg_val}" } #util functions @@ -1688,7 +1689,6 @@ function _util_get_qsfp_abs { #get physical port phy_port=$(_port_fp2phy $QSFP_PORT) - echo "fp port $QSFP_PORT => phy port $phy_port" # read status from cpld _qsfp_cpld_var_set ${phy_port} cpld_reg_file_name="${CPLD_QSFP_STATUS_KEY}_${cpld_port_index}" @@ -1743,6 +1743,88 @@ function _config_rmem { echo "109430400" > /proc/sys/net/core/rmem_max } +# util function to get logx value +function logx { + v=$1 + n=$2 + logx_res=$(echo "${v} ${n}" | awk '{printf "%f\n",log($1)/log($2)}') +} + +# get qsfp ddm data +function _i2c_qsfp_ddm_get { + local phy_port=0 + + phy_port=$(_port_fp2phy ${QSFP_PORT}) + + # input parameter validation + _util_input_check "${QSFP_PORT}" "${MIN_QSFP_PORT_NUM}" "${MAX_QSFP_PORT_NUM}" + + # check if port presence + #status: 0 -> Down, 1 -> Up + _util_get_qsfp_abs + if [ "${status}" == "0" ]; then + echo "port ${QSFP_PORT} not presence" + return + fi + + _qsfp_eeprom_var_set ${phy_port} + + # Get QSFP EEPROM info + # only need first 128 bytes (page0) for ddm parsing + local size=128 + eeprom_path="${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom" + #echo "get ${eeprom_path}" + qsfp_info=$(dd if=${eeprom_path} bs=${size} count=1 2>/dev/null | base64) + + # temperature + temp_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s 22 -n 1 -e '"%d"') + temp_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s 23 -n 1 -e '"%d"') + temp=$(echo "$temp_val1 $temp_val2" | awk '{printf "%f\n", $1 + $2/256.0}') + #temp=$(( ${temp_val1} + ${temp_val2}/256.0 )) + echo "temp=$temp" + # voltage + volt_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s 26 -n 1 -e '"%d"') + volt_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s 27 -n 1 -e '"%d"') + #volt=$(((($volt_val1 << 8) | volt_val2) / 10000)) + volt_val3=$(( ($volt_val1 << 8) | $volt_val2 )) + volt=$(echo "$volt_val3" | awk '{printf "%f\n", $1/10000.0}') + echo "volt=$volt" + + # 4 channels + for i in {0..3}; + do + echo "channel $i:" + # txBias + offset=$(( 42 + $i*2 )) + txBias_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + offset=$(( 43 + $i*2 )) + txBias_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + txBias_val3=$(( ($txBias_val1 << 8) | $txBias_val2 )) + txBias=$(echo "$txBias_val3" | awk '{printf "%f\n", (131.0*$1)/65535}') + echo " txBias=$txBias" + # txPower + offset=$(( 50 + $i*2 )) + txPower_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + offset=$(( 51 + $i*2 )) + txPower_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + txPower_val3=$(( ($txPower_val1 << 8) | $txPower_val2 )) + txPower_val4=$(echo "$txPower_val3" | awk '{printf "%f\n", $1*0.0001}') + logx $txPower_val4 10 + txPower=$(echo "$logx_res" | awk '{printf "%f\n", $1*10}') + echo " txPower=$txPower" + # rxPower + offset=$(( 34 + $i*2 )) + rxPower_val1=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + offset=$(( 35 + $i*2 )) + rxPower_val2=$(echo $qsfp_info | base64 -d -i | hexdump -s $offset -n 1 -e '"%d"') + rxPower_val3=$(( ($rxPower_val1 << 8) | $rxPower_val2 )) + rxPower_val4=$(echo "$rxPower_val3" | awk '{printf "%f\n", $1*0.0001}') + logx $rxPower_val4 10 + rxPower=$(echo "$logx_res" | awk '{printf "%f\n", $1*10}') + echo " rxPower=$rxPower" + done +} + #Main Function function _main { tart_time_str=`date` @@ -1788,6 +1870,8 @@ function _main { _i2c_qsfp_type_get elif [ "${EXEC_FUNC}" == "i2c_sfp_type_get" ]; then _i2c_sfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_ddm_get" ]; then + _i2c_qsfp_ddm_get elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then _i2c_led_psu_status_set elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules b/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules index 352dd55afbd7..759d26c5c4d1 100755 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules @@ -1,13 +1,4 @@ #!/usr/bin/make -f -# -*- makefile -*- -# Sample debian/rules that uses debhelper. -# This file was originally written by Joey Hess and Craig Small. -# As a special exception, when this file is copied by dh-make into a -# dh-make output file, you may use that output file without restriction. -# This special exception was added by Craig Small in version 0.37 of dh-make. - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 export INSTALL_MOD_DIR:=extra @@ -15,7 +6,7 @@ PACKAGE_PRE_NAME := sonic-platform-ingrasys KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= s9100 s8900-64xc s8900-54xc s8810-32q s9200-64x +MODULE_DIRS:= s9100 s8900-64xc s8900-54xc s8810-32q s9200-64x MODULE_DIR := modules UTILS_DIR := utils SERVICE_DIR := service @@ -24,57 +15,28 @@ CONF_DIR := conf %: dh $@ --with systemd -clean: - dh_testdir - dh_testroot - dh_clean - -build: - #make modules -C $(KERNEL_SRC)/build M=$(MODULE_SRC) +override_dh_auto_build: (for mod in $(MODULE_DIRS); do \ make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ done) -binary: binary-arch binary-indep - # Nothing to do - -binary-arch: - # Nothing to do - -#install: build - #dh_testdir - #dh_testroot - #dh_clean -k - #dh_installdirs - -binary-indep: - dh_testdir - dh_installdirs +override_dh_auto_install: + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} \ + $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} usr/sbin; \ + cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/*.sh \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/sbin; \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} lib/systemd/system; \ + cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system; \ + done) - # Custom package commands +override_dh_clean: + dh_clean (for mod in $(MODULE_DIRS); do \ - mkdir debian/tmp/usr/sbin -p; \ - mkdir debian/tmp/lib/systemd/system -p; \ - mkdir debian/tmp/etc -p; \ - dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ - cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ - cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/*.sh debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/sbin/; \ - cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system/; \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \ done) - # Resuming debhelper scripts - dh_testroot - dh_install - dh_installchangelogs - dh_installdocs - dh_systemd_enable - dh_installinit - dh_systemd_start - dh_link - dh_fixperms - dh_compress - dh_strip - dh_installdeb - dh_gencontrol - dh_md5sums - dh_builddeb -.PHONY: build binary binary-arch binary-indep clean + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.dirs deleted file mode 100644 index bec29f195770..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.dirs +++ /dev/null @@ -1,3 +0,0 @@ -usr/sbin -lib/systemd/system -etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.init b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.init new file mode 100644 index 000000000000..19f51c0a9666 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S8810-32Q board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils.sh i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s8810-32q.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.install deleted file mode 100644 index 38efbef5d864..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.install +++ /dev/null @@ -1,3 +0,0 @@ -lib/systemd/ -usr/sbin/ -etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postinst deleted file mode 100644 index 6a94f8327559..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postinst +++ /dev/null @@ -1,43 +0,0 @@ -# Automatically added by dh_systemd_enable -# This will only remove masks created by d-s-h on package removal. -deb-systemd-helper unmask s8810-32q-monitor.service >/dev/null || true -deb-systemd-helper unmask qsfp-monitor.service >/dev/null || true -# Generate kernel modules.dep and map files for add eeprom_mb. -depmod -a || true -# was-enabled defaults to true, so new installations run enable. -if deb-systemd-helper --quiet was-enabled s8810-32q-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable s8810-32q-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state s8810-32q-monitor.service >/dev/null || true -fi -if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable qsfp-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s8810-32q-monitor" ]; then - update-rc.d s8810-32q-monitor defaults >/dev/null - invoke-rc.d s8810-32q-monitor start || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - update-rc.d qsfp-monitor defaults >/dev/null - invoke-rc.d qsfp-monitor start || exit $? -fi -# End automatically added section -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - deb-systemd-invoke start s8810-32q-monitor.service >/dev/null || true - deb-systemd-invoke start qsfp-monitor.service >/dev/null || true -fi -# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postrm deleted file mode 100644 index a1049b153eef..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postrm +++ /dev/null @@ -1,38 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - fi -# End automatically added section -# Automatically added by dh_installinit -if [ "$1" = "purge" ] ; then - update-rc.d s8810-32q-monitor remove >/dev/null - update-rc.d qsfp-monitor remove >/dev/null -fi - - -# In case this system is running systemd, we make systemd reload the unit files -# to pick up changes. -if [ -d /run/systemd/system ] ; then - systemctl --system daemon-reload >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_systemd_enable -if [ "$1" = "remove" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper mask s8810-32q-monitor.service >/dev/null - deb-systemd-helper mask qsfp-monitor.service >/dev/null - fi -fi - -if [ "$1" = "purge" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper purge s8810-32q-monitor.service >/dev/null - deb-systemd-helper unmask s8810-32q-monitor.service >/dev/null - deb-systemd-helper purge qsfp-monitor.service >/dev/null - deb-systemd-helper unmask qsfp-monitor.service >/dev/null - fi -fi -# Generate kernel modules.dep and map files for remove eeprom_mb. -depmod -a || true -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.prerm deleted file mode 100644 index 5a6581e5f410..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.prerm +++ /dev/null @@ -1,17 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - deb-systemd-invoke stop s8810-32q-monitor.service >/dev/null - deb-systemd-invoke stop qsfp-monitor.service >/dev/null -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s8810-32q-monitor" ]; then - invoke-rc.d s8810-32q-monitor stop || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - invoke-rc.d qsfp-monitor stop || exit $? -fi -# Driver deinit -/usr/sbin/i2c_utils.sh i2c_deinit -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.upstart deleted file mode 100644 index f907d1bb51e5..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.upstart +++ /dev/null @@ -1,6 +0,0 @@ -description "SONiC platform service" - -respawn - -exec /usr/sbin/s8810_32q_monitor.sh -exec /usr/sbin/qsfp_monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.dirs deleted file mode 100644 index bec29f195770..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.dirs +++ /dev/null @@ -1,3 +0,0 @@ -usr/sbin -lib/systemd/system -etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.init b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.init new file mode 100644 index 000000000000..f2e4932b3294 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S8900-54XC board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils.sh i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s8900-54xc.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.install deleted file mode 100644 index 38efbef5d864..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.install +++ /dev/null @@ -1,3 +0,0 @@ -lib/systemd/ -usr/sbin/ -etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postinst deleted file mode 100644 index d2dc4ea518fb..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postinst +++ /dev/null @@ -1,43 +0,0 @@ -# Automatically added by dh_systemd_enable -# This will only remove masks created by d-s-h on package removal. -deb-systemd-helper unmask s8900-54xc-monitor.service >/dev/null || true -# Generate kernel modules.dep and map files for add eeprom_mb. -depmod -a || true -# was-enabled defaults to true, so new installations run enable. -if deb-systemd-helper --quiet was-enabled s8900-54xc-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable s8900-54xc-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state s8900-54xc-monitor.service >/dev/null || true -fi -if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable qsfp-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true -fi - -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s8900-54xc-monitor" ]; then - update-rc.d s8900-54xc-monitor defaults >/dev/null - invoke-rc.d s8900-54xc-monitor start || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - update-rc.d qsfp-monitor defaults >/dev/null - invoke-rc.d qsfp-monitor start || exit $? -fi -# End automatically added section -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - deb-systemd-invoke start s8900-54xc-monitor.service >/dev/null || true - deb-systemd-invoke start qsfp-monitor.service >/dev/null || true -fi -# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postrm deleted file mode 100644 index b4e4ede5d88d..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postrm +++ /dev/null @@ -1,38 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - fi -# End automatically added section -# Automatically added by dh_installinit -if [ "$1" = "purge" ] ; then - update-rc.d s8900-54xc-monitor remove >/dev/null - update-rc.d qsfp-monitor remove >/dev/null -fi - - -# In case this system is running systemd, we make systemd reload the unit files -# to pick up changes. -if [ -d /run/systemd/system ] ; then - systemctl --system daemon-reload >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_systemd_enable -if [ "$1" = "remove" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper mask s8900-54xc-monitor.service >/dev/null - deb-systemd-helper mask qsfp-monitor.service >/dev/null - fi -fi - -if [ "$1" = "purge" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper purge s8900-54xc-monitor.service >/dev/null - deb-systemd-helper unmask s8900-54xc-monitor.service >/dev/null - deb-systemd-helper purge qsfp-monitor.service >/dev/null - deb-systemd-helper unmask qsfp-monitor.service >/dev/null - fi -fi -# Generate kernel modules.dep and map files for remove eeprom_mb. -depmod -a || true -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.prerm deleted file mode 100644 index b35262b16cf8..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.prerm +++ /dev/null @@ -1,17 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - deb-systemd-invoke stop s8900-54xc-monitor.service >/dev/null - deb-systemd-invoke stop qsfp-monitor.service >/dev/null -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s8900-54xc-monitor" ]; then - invoke-rc.d s8900-54xc-monitor stop || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - invoke-rc.d qsfp-monitor stop || exit $? -fi -# Driver deinit -/usr/sbin/i2c_utils.sh i2c_deinit -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.upstart deleted file mode 100644 index cfdfc490fcc7..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.upstart +++ /dev/null @@ -1,6 +0,0 @@ -description "SONiC platform service" - -respawn - -exec /usr/sbin/s8900_54xc_monitor.sh -exec /usr/sbin/qsfp_monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.dirs deleted file mode 100644 index be337bc5ea1f..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.dirs +++ /dev/null @@ -1,3 +0,0 @@ -usr/sbin -lib/systemd/system -etc/ diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.init b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.init new file mode 100644 index 000000000000..2790ca3517c6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S8900-64XC board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils.sh i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s8900-64xc.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.install deleted file mode 100644 index 1cf6f97b306f..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.install +++ /dev/null @@ -1,3 +0,0 @@ -lib/systemd/ -usr/sbin/ -etc/ diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postinst deleted file mode 100644 index dfc789e964bd..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postinst +++ /dev/null @@ -1,42 +0,0 @@ -# Automatically added by dh_systemd_enable -# This will only remove masks created by d-s-h on package removal. -deb-systemd-helper unmask s8900-64xc-monitor.service >/dev/null || true -# Generate kernel modules.dep and map files for add eeprom_mb. -depmod -a || true -# was-enabled defaults to true, so new installations run enable. -if deb-systemd-helper --quiet was-enabled s8900-64xc-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable s8900-64xc-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state s8900-64xc-monitor.service >/dev/null || true -fi -if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable qsfp-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s8900-64xc-monitor" ]; then - update-rc.d s8900-64xc-monitor defaults >/dev/null - invoke-rc.d s8900-64xc-monitor start || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - update-rc.d qsfp-monitor defaults >/dev/null - invoke-rc.d qsfp-monitor start || exit $? -fi -# End automatically added section -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - deb-systemd-invoke start s8900-64xc-monitor.service >/dev/null || true - deb-systemd-invoke start qsfp-monitor.service >/dev/null || true -fi -# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postrm deleted file mode 100644 index e3dddecc088b..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postrm +++ /dev/null @@ -1,38 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - fi -# End automatically added section -# Automatically added by dh_installinit -if [ "$1" = "purge" ] ; then - update-rc.d s8900-64xc-monitor remove >/dev/null - update-rc.d qsfp-monitor remove >/dev/null -fi - - -# In case this system is running systemd, we make systemd reload the unit files -# to pick up changes. -if [ -d /run/systemd/system ] ; then - systemctl --system daemon-reload >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_systemd_enable -if [ "$1" = "remove" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper mask s8900-64xc-monitor.service >/dev/null - deb-systemd-helper mask qsfp-monitor.service >/dev/null - fi -fi - -if [ "$1" = "purge" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper purge s8900-64xc-monitor.service >/dev/null - deb-systemd-helper unmask s8900-64xc-monitor.service >/dev/null - deb-systemd-helper purge qsfp-monitor.service >/dev/null - deb-systemd-helper unmask qsfp-monitor.service >/dev/null - fi -fi -# Generate kernel modules.dep and map files for remove eeprom_mb. -depmod -a || true -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.prerm deleted file mode 100644 index 2168a6c76245..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.prerm +++ /dev/null @@ -1,15 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - deb-systemd-invoke stop s8900-64xc-monitor.service >/dev/null - deb-systemd-invoke stop qsfp-monitor.service >/dev/null -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s8900-64xc-monitor" ]; then - invoke-rc.d s8900-64xc-monitor stop || exit $? - invoke-rc.d qsfp-monitor stop || exit $? -fi -# Driver deinit -/usr/sbin/i2c_utils.sh i2c_deinit -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.upstart deleted file mode 100644 index 25510457ecd8..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.upstart +++ /dev/null @@ -1,6 +0,0 @@ -description "SONiC platform service" - -respawn - -exec /usr/sbin/s8900_64xc_monitor.sh -exec /usr/sbin/qsfp-monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.dirs deleted file mode 100644 index bec29f195770..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.dirs +++ /dev/null @@ -1,3 +0,0 @@ -usr/sbin -lib/systemd/system -etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.init b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.init new file mode 100644 index 000000000000..017708708786 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S9100 board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils.sh i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s9100.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.install deleted file mode 100644 index 38efbef5d864..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.install +++ /dev/null @@ -1,3 +0,0 @@ -lib/systemd/ -usr/sbin/ -etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postinst deleted file mode 100644 index a9bc64e26c05..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postinst +++ /dev/null @@ -1,43 +0,0 @@ -# Automatically added by dh_systemd_enable -# This will only remove masks created by d-s-h on package removal. -deb-systemd-helper unmask s9100-monitor.service >/dev/null || true -deb-systemd-helper unmask qsfp-monitor.service >/dev/null || true -# Generate kernel modules.dep and map files for add eeprom_mb. -depmod -a || true -# was-enabled defaults to true, so new installations run enable. -if deb-systemd-helper --quiet was-enabled s9100-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable s9100-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state s9100-monitor.service >/dev/null || true -fi -if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable qsfp-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s9100-monitor" ]; then - update-rc.d s9100-monitor defaults >/dev/null - invoke-rc.d s9100-monitor start || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - update-rc.d qsfp-monitor defaults >/dev/null - invoke-rc.d qsfp-monitor start || exit $? -fi -# End automatically added section -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - deb-systemd-invoke start s9100-monitor.service >/dev/null || true - deb-systemd-invoke start qsfp-monitor.service >/dev/null || true -fi -# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postrm deleted file mode 100644 index 669179b11e50..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postrm +++ /dev/null @@ -1,38 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - fi -# End automatically added section -# Automatically added by dh_installinit -if [ "$1" = "purge" ] ; then - update-rc.d s9100-monitor remove >/dev/null - update-rc.d qsfp-monitor remove >/dev/null -fi - - -# In case this system is running systemd, we make systemd reload the unit files -# to pick up changes. -if [ -d /run/systemd/system ] ; then - systemctl --system daemon-reload >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_systemd_enable -if [ "$1" = "remove" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper mask s9100-monitor.service >/dev/null - deb-systemd-helper mask qsfp-monitor.service >/dev/null - fi -fi - -if [ "$1" = "purge" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper purge s9100-monitor.service >/dev/null - deb-systemd-helper unmask s9100-monitor.service >/dev/null - deb-systemd-helper purge qsfp-monitor.service >/dev/null - deb-systemd-helper unmask qsfp-monitor.service >/dev/null - fi -fi -# Generate kernel modules.dep and map files for remove eeprom_mb. -depmod -a || true -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.prerm deleted file mode 100644 index 2ca8a83b273f..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.prerm +++ /dev/null @@ -1,17 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - deb-systemd-invoke stop s9100-monitor.service >/dev/null - deb-systemd-invoke stop qsfp-monitor.service >/dev/null -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s9100-monitor" ]; then - invoke-rc.d s9100-monitor stop || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - invoke-rc.d qsfp-monitor stop || exit $? -fi -# Driver deinit -/usr/sbin/i2c_utils.sh i2c_deinit -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.upstart deleted file mode 100644 index 5d0ba7080129..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.upstart +++ /dev/null @@ -1,6 +0,0 @@ -description "SONiC platform service" - -respawn - -exec /usr/sbin/s9100_monitor.sh -exec /usr/sbin/qsfp_monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.dirs deleted file mode 100644 index bec29f195770..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.dirs +++ /dev/null @@ -1,3 +0,0 @@ -usr/sbin -lib/systemd/system -etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.init b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.init new file mode 100644 index 000000000000..076838e1aa0d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S9200-64X board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils.sh i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s9200-64x.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.install deleted file mode 100644 index 38efbef5d864..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.install +++ /dev/null @@ -1,3 +0,0 @@ -lib/systemd/ -usr/sbin/ -etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postinst deleted file mode 100644 index 0605612a1190..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postinst +++ /dev/null @@ -1,43 +0,0 @@ -# Automatically added by dh_systemd_enable -# This will only remove masks created by d-s-h on package removal. -deb-systemd-helper unmask s9200-64x-monitor.service >/dev/null || true -deb-systemd-helper unmask qsfp-monitor.service >/dev/null || true -# Generate kernel modules.dep and map files for add eeprom_mb. -depmod -a || true -# was-enabled defaults to true, so new installations run enable. -if deb-systemd-helper --quiet was-enabled s9200-64x-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable s9200-64x-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state s9200-64x-monitor.service >/dev/null || true -fi -if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable qsfp-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s9200-64x-monitor" ]; then - update-rc.d s9200-64x-monitor defaults >/dev/null - invoke-rc.d s9200-64x-monitor start || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - update-rc.d qsfp-monitor defaults >/dev/null - invoke-rc.d qsfp-monitor start || exit $? -fi -# End automatically added section -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - deb-systemd-invoke start s9200-64x-monitor.service >/dev/null || true - deb-systemd-invoke start qsfp-monitor.service >/dev/null || true -fi -# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postrm deleted file mode 100644 index 3e9494097556..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postrm +++ /dev/null @@ -1,38 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - fi -# End automatically added section -# Automatically added by dh_installinit -if [ "$1" = "purge" ] ; then - update-rc.d s9200-64x-monitor remove >/dev/null - update-rc.d qsfp-monitor remove >/dev/null -fi - - -# In case this system is running systemd, we make systemd reload the unit files -# to pick up changes. -if [ -d /run/systemd/system ] ; then - systemctl --system daemon-reload >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_systemd_enable -if [ "$1" = "remove" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper mask s9200-64x-monitor.service >/dev/null - deb-systemd-helper mask qsfp-monitor.service >/dev/null - fi -fi - -if [ "$1" = "purge" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper purge s9200-64x-monitor.service >/dev/null - deb-systemd-helper unmask s9200-64x-monitor.service >/dev/null - deb-systemd-helper purge qsfp-monitor.service >/dev/null - deb-systemd-helper unmask qsfp-monitor.service >/dev/null - fi -fi -# Generate kernel modules.dep and map files for remove eeprom_mb. -depmod -a || true -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.prerm deleted file mode 100644 index 6238dcad7886..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.prerm +++ /dev/null @@ -1,17 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - deb-systemd-invoke stop s9200-64x-monitor.service >/dev/null - deb-systemd-invoke stop qsfp-monitor.service >/dev/null -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s9200-64x-monitor" ]; then - invoke-rc.d s9200-64x-monitor stop || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - invoke-rc.d qsfp-monitor stop || exit $? -fi -# Driver deinit -/usr/sbin/i2c_utils.sh i2c_deinit -# End automatically added section - diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.upstart deleted file mode 100644 index 00803ff5e3b9..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.upstart +++ /dev/null @@ -1,6 +0,0 @@ -description "SONiC platform service" - -respawn - -exec /usr/sbin/s9200_64x_monitor.sh -exec /usr/sbin/qsfp_monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh index 98ffb9d8d2f4..1f32d682d931 100644 --- a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh @@ -15,7 +15,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -VERSION="1.0.0" +# trun on for more debug output +#DEBUG="on" + +VERSION="1.1.0" TRUE=200 FALSE=404 @@ -165,11 +168,14 @@ REG_CFG_1=7 #Bit Mask BIT_MASK=(1 2 4 8 16 32 64 128) +#GPIO Offset +GPIO_OFFSET=0 # Help usage function function _help { echo "=========================================================" echo "# Description: Help Function" + echo "# Version : ${VERSION}" echo "=========================================================" echo "----------------------------------------------------" echo "EX : ${0} help" @@ -315,7 +321,9 @@ function _i2c_init { modprobe gpio-pca953x _i2c_fan_init _i2c_io_exp_init + rmmod gpio_ich _i2c_gpio_init + modprobe gpio_ich _i2c_psu_init _i2c_qsfp_eeprom_init "new" _i2c_mb_eeprom_init "new" @@ -540,15 +548,25 @@ function _gpio_export { #export gpio echo ${gpio_n} > ${PATH_SYS_GPIO}/export - #set gpio direction - echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - #set gpio active_low echo ${active_low} > ${PATH_SYS_GPIO}/gpio${gpio_n}/active_low - #set value - if [ ! -z "${value}" ]; then - echo ${value} > ${PATH_SYS_GPIO}/gpio${gpio_n}/value + #set gpio direction and value + if [ "${direction}" == "out" ]; then + if [ -z "${value}" ]; then + echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + elif [ "${value}" == "0" ]; then + echo low > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + else + echo high > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + fi + elif [ "${direction}" == "in" ]; then + echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + if [ ! -z "${value}" ]; then + echo "Warning!! Unused Value (${value})" + fi + else + echo "Error!! Unknow Direction (${direction})" fi } @@ -576,14 +594,30 @@ function _clear_gpiomap { rm -rf ${PATH_GPIOMAP} } +# To set the global variable GPIO_OFFSET +function _set_gpio_offset { + GPIO_OFFSET=0 + for d in `ls /sys/class/gpio/ | grep gpiochip` + do + gpiochip_no=${d##gpiochip} + if [ $gpiochip_no -gt 255 ]; then + GPIO_OFFSET=256 + break + fi + done + #echo "set GPIO_OFFSET=${GPIO_OFFSET}" +} + #GPIO Init function _i2c_gpio_init { local i=0 #ABS Port 0-31 echo "pca9535 ${I2C_ADDR_MUX_9535_1}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/new_device + _set_gpio_offset echo "pca9535 ${I2C_ADDR_MUX_9535_0}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/new_device - for i in {224..255} + #for i in {224..255} + for((i=${GPIO_OFFSET}+224;i<=${GPIO_OFFSET}+255;i++)); do _gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW} _set_gpiomap ${i} "QSFP$(( i - 223 ))_ABS" @@ -592,7 +626,8 @@ function _i2c_gpio_init { #INT Port 0-31 echo "pca9535 ${I2C_ADDR_MUX_9535_3}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/new_device echo "pca9535 ${I2C_ADDR_MUX_9535_2}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/new_device - for i in {192..223} + #for i in {192..223} + for((i=${GPIO_OFFSET}+192;i<=${GPIO_OFFSET}+223;i++)); do _gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW} _set_gpiomap ${i} "QSFP$(( i - 191 ))_INT" @@ -601,7 +636,8 @@ function _i2c_gpio_init { #LP Mode Port 0-31 echo "pca9535 ${I2C_ADDR_MUX_9535_5}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/new_device echo "pca9535 ${I2C_ADDR_MUX_9535_4}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/new_device - for i in {160..191} + #for i in {160..191} + for((i=${GPIO_OFFSET}+160;i<=${GPIO_OFFSET}+191;i++)); do _gpio_export ${i} ${DIR_OUT} ${ACTIVE_HIGH} _set_gpiomap ${i} "QSFP$(( i - 159 ))_LPMODE" @@ -610,7 +646,8 @@ function _i2c_gpio_init { #RST Port 0-31 echo "pca9535 ${I2C_ADDR_MUX_9535_7}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/new_device echo "pca9535 ${I2C_ADDR_MUX_9535_6}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/new_device - for i in {128..159} + #for i in {128..159} + for((i=${GPIO_OFFSET}+128;i<=${GPIO_OFFSET}+159;i++)); do _gpio_export ${i} ${DIR_OUT} ${ACTIVE_LOW} _set_gpiomap ${i} "QSFP$(( i - 127 ))_RST" @@ -622,7 +659,8 @@ function _i2c_gpio_init { #MODSEL Port 0-31 echo "pca9535 ${I2C_ADDR_MUX_9535_9}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN3}/new_device echo "pca9535 ${I2C_ADDR_MUX_9535_8}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN3}/new_device - for i in {96..127} + #for i in {96..127} + for((i=${GPIO_OFFSET}+96;i<=${GPIO_OFFSET}+127;i++)); do _gpio_export ${i} ${DIR_OUT} ${ACTIVE_LOW} _set_gpiomap ${i} "QSFP$(( i - 95 ))_MODSEL" @@ -965,31 +1003,36 @@ function _qsfp_port_i2c_var_set { regAddr=0x20 dataAddr=0 eeprombusbase=${NUM_MUX_9548_2_CHAN0} - gpioBase=224 + gpioBase=$((${GPIO_OFFSET}+224)) + #gpioBase=224 ;; 9|10|11|12|13|14|15|16) i2cbus=${NUM_MUX_9548_1_CHAN1} regAddr=0x20 dataAddr=1 eeprombusbase=${NUM_MUX_9548_3_CHAN0} - gpioBase=224 + gpioBase=$((${GPIO_OFFSET}+224)) + #gpioBase=224 ;; 17|18|19|20|21|22|23|24) i2cbus=${NUM_MUX_9548_1_CHAN1} regAddr=0x21 dataAddr=0 eeprombusbase=${NUM_MUX_9548_4_CHAN0} - gpioBase=240 + gpioBase=$((${GPIO_OFFSET}+240)) + #gpioBase=240 ;; 25|26|27|28|29|30|31|32) i2cbus=${NUM_MUX_9548_1_CHAN1} regAddr=0x21 dataAddr=1 eeprombusbase=${NUM_MUX_9548_5_CHAN0} - gpioBase=240 + gpioBase=$((${GPIO_OFFSET}+240)) + #gpioBase=240 ;; *) echo "Please input 1~32" + exit ;; esac } @@ -1366,6 +1409,7 @@ function _main { start_time_str=`date` start_time_sec=$(date +%s) + _set_gpio_offset if [ "${EXEC_FUNC}" == "help" ]; then _help elif [ "${EXEC_FUNC}" == "i2c_init" ]; then @@ -1439,14 +1483,17 @@ function _main { exit ${FALSE} fi - end_time_str=`date` - end_time_sec=$(date +%s) - diff_time=$[ ${end_time_sec} - ${start_time_sec} ] - echo "Start Time: ${start_time_str} (${start_time_sec})" - echo "End Time : ${end_time_str} (${end_time_sec})" - echo "Total Execution Time: ${diff_time} sec" + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" - echo "done!!!" + echo "done!!!" + fi } _main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/i2c_utils.sh index eea7b9ba8fe9..dbea63786621 100644 --- a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/i2c_utils.sh +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/i2c_utils.sh @@ -15,7 +15,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -VERSION="1.0.0" +# trun on for more debug output +#DEBUG="on" + +VERSION="1.1.0" TRUE=200 FALSE=404 PORT_START=1 @@ -97,11 +100,14 @@ ZQSFP_PORT0_15_ABS_GPIO_IDX=192 ZQSFP_PORT16_31_ABS_GPIO_IDX=176 ZQSFP_PORT32_47_ABS_GPIO_IDX=160 +#GPIO Offset +GPIO_OFFSET=0 # Help usage function function _help { echo "=========================================================" echo "# Description: Help Function" + echo "# Version : ${VERSION}" echo "=========================================================" echo "----------------------------------------------------" echo "EX : ${0} help" @@ -226,7 +232,9 @@ function _i2c_init { modprobe eeprom_mb _i2c_fan_init _i2c_io_exp_init + rmmod gpio_ich _i2c_gpio_init + modprobe gpio_ich _i2c_cpld_init _i2c_psu_eeprom_init _i2c_led_psu_status_set @@ -529,222 +537,279 @@ function _i2c_unmount_sfp_eeprom { echo "Unmount Port $1 EEPROM" } +# To set the global variable GPIO_OFFSET +function _set_gpio_offset { + GPIO_OFFSET=0 + for d in `ls /sys/class/gpio/ | grep gpiochip` + do + gpiochip_no=${d##gpiochip} + if [ $gpiochip_no -gt 255 ]; then + GPIO_OFFSET=256 + break + fi + done + #echo "set GPIO_OFFSET=${GPIO_OFFSET}" +} + #GPIO Init function _i2c_gpio_init { #QSFP/ZQSFP ABS+INT echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/new_device + _set_gpio_offset + for((i=${GPIO_OFFSET}+240;i<=${GPIO_OFFSET}+255;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done - _retry "echo 240 > /sys/class/gpio/export" - echo 241 > /sys/class/gpio/export - echo 242 > /sys/class/gpio/export - echo 243 > /sys/class/gpio/export - echo 244 > /sys/class/gpio/export - echo 245 > /sys/class/gpio/export - echo 246 > /sys/class/gpio/export - echo 247 > /sys/class/gpio/export - echo 248 > /sys/class/gpio/export - echo 249 > /sys/class/gpio/export - echo 250 > /sys/class/gpio/export - echo 251 > /sys/class/gpio/export - echo 252 > /sys/class/gpio/export - echo 253 > /sys/class/gpio/export - echo 254 > /sys/class/gpio/export - echo 255 > /sys/class/gpio/export - - echo 1 > /sys/class/gpio/gpio241/active_low #QSFP49 ABS - echo 1 > /sys/class/gpio/gpio240/active_low #QSFP48 ABS - echo 1 > /sys/class/gpio/gpio243/active_low #QSFP51 ABS - echo 1 > /sys/class/gpio/gpio242/active_low #QSFP50 ABS - echo 1 > /sys/class/gpio/gpio245/active_low #QSFP53 ABS - echo 1 > /sys/class/gpio/gpio244/active_low #QSFP52 ABS - echo 1 > /sys/class/gpio/gpio247/active_low #NA - echo 1 > /sys/class/gpio/gpio246/active_low #NA - echo 1 > /sys/class/gpio/gpio249/active_low #QSFP49 INT - echo 1 > /sys/class/gpio/gpio248/active_low #QSFP48 INT - echo 1 > /sys/class/gpio/gpio251/active_low #QSFP51 INT - echo 1 > /sys/class/gpio/gpio250/active_low #QSFP50 INT - echo 1 > /sys/class/gpio/gpio253/active_low #QSFP53 INT - echo 1 > /sys/class/gpio/gpio252/active_low #QSFP52 INT - echo 1 > /sys/class/gpio/gpio255/active_low #NA - echo 1 > /sys/class/gpio/gpio254/active_low #NA + #_retry "echo 240 > /sys/class/gpio/export" + #echo 241 > /sys/class/gpio/export + #echo 242 > /sys/class/gpio/export + #echo 243 > /sys/class/gpio/export + #echo 244 > /sys/class/gpio/export + #echo 245 > /sys/class/gpio/export + #echo 246 > /sys/class/gpio/export + #echo 247 > /sys/class/gpio/export + #echo 248 > /sys/class/gpio/export + #echo 249 > /sys/class/gpio/export + #echo 250 > /sys/class/gpio/export + #echo 251 > /sys/class/gpio/export + #echo 252 > /sys/class/gpio/export + #echo 253 > /sys/class/gpio/export + #echo 254 > /sys/class/gpio/export + #echo 255 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio241/active_low #QSFP49 ABS + #echo 1 > /sys/class/gpio/gpio240/active_low #QSFP48 ABS + #echo 1 > /sys/class/gpio/gpio243/active_low #QSFP51 ABS + #echo 1 > /sys/class/gpio/gpio242/active_low #QSFP50 ABS + #echo 1 > /sys/class/gpio/gpio245/active_low #QSFP53 ABS + #echo 1 > /sys/class/gpio/gpio244/active_low #QSFP52 ABS + #echo 1 > /sys/class/gpio/gpio247/active_low #NA + #echo 1 > /sys/class/gpio/gpio246/active_low #NA + #echo 1 > /sys/class/gpio/gpio249/active_low #QSFP49 INT + #echo 1 > /sys/class/gpio/gpio248/active_low #QSFP48 INT + #echo 1 > /sys/class/gpio/gpio251/active_low #QSFP51 INT + #echo 1 > /sys/class/gpio/gpio250/active_low #QSFP50 INT + #echo 1 > /sys/class/gpio/gpio253/active_low #QSFP53 INT + #echo 1 > /sys/class/gpio/gpio252/active_low #QSFP52 INT + #echo 1 > /sys/class/gpio/gpio255/active_low #NA + #echo 1 > /sys/class/gpio/gpio254/active_low #NA #QSFP/zQSFP LPMODE+MODSEL echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN3_DEVICE}/new_device - echo 224 > /sys/class/gpio/export #QSFP0 LPMODE - echo 225 > /sys/class/gpio/export #QSFP1 LPMODE - echo 226 > /sys/class/gpio/export #QSFP2 LPMODE - echo 227 > /sys/class/gpio/export #QSFP3 LPMODE - echo 228 > /sys/class/gpio/export #QSFP4 LPMODE - echo 229 > /sys/class/gpio/export #QSFP5 LPMODE - echo 230 > /sys/class/gpio/export #NA - echo 231 > /sys/class/gpio/export #NA - echo 232 > /sys/class/gpio/export #QSFP0 MODSEL - echo 233 > /sys/class/gpio/export #QSFP1 MODSEL - echo 234 > /sys/class/gpio/export #QSFP2 MODSEL - echo 235 > /sys/class/gpio/export #QSFP3 MODSEL - echo 236 > /sys/class/gpio/export #QSFP4 MODSEL - echo 237 > /sys/class/gpio/export #QSFP5 MODSEL - echo 238 > /sys/class/gpio/export #NA - echo 239 > /sys/class/gpio/export #NA - echo out > /sys/class/gpio/gpio224/direction - echo out > /sys/class/gpio/gpio225/direction - echo out > /sys/class/gpio/gpio226/direction - echo out > /sys/class/gpio/gpio227/direction - echo out > /sys/class/gpio/gpio228/direction - echo out > /sys/class/gpio/gpio229/direction - echo out > /sys/class/gpio/gpio230/direction - echo out > /sys/class/gpio/gpio231/direction - echo out > /sys/class/gpio/gpio232/direction - echo out > /sys/class/gpio/gpio233/direction - echo out > /sys/class/gpio/gpio234/direction - echo out > /sys/class/gpio/gpio235/direction - echo out > /sys/class/gpio/gpio236/direction - echo out > /sys/class/gpio/gpio237/direction - echo out > /sys/class/gpio/gpio238/direction - echo out > /sys/class/gpio/gpio239/direction + for((i=${GPIO_OFFSET}+224;i<=${GPIO_OFFSET}+239;i++)); + do + echo $i > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio${i}/direction + done + + #echo 224 > /sys/class/gpio/export #QSFP0 LPMODE + #echo 225 > /sys/class/gpio/export #QSFP1 LPMODE + #echo 226 > /sys/class/gpio/export #QSFP2 LPMODE + #echo 227 > /sys/class/gpio/export #QSFP3 LPMODE + #echo 228 > /sys/class/gpio/export #QSFP4 LPMODE + #echo 229 > /sys/class/gpio/export #QSFP5 LPMODE + #echo 230 > /sys/class/gpio/export #NA + #echo 231 > /sys/class/gpio/export #NA + #echo 232 > /sys/class/gpio/export #QSFP0 MODSEL + #echo 233 > /sys/class/gpio/export #QSFP1 MODSEL + #echo 234 > /sys/class/gpio/export #QSFP2 MODSEL + #echo 235 > /sys/class/gpio/export #QSFP3 MODSEL + #echo 236 > /sys/class/gpio/export #QSFP4 MODSEL + #echo 237 > /sys/class/gpio/export #QSFP5 MODSEL + #echo 238 > /sys/class/gpio/export #NA + #echo 239 > /sys/class/gpio/export #NA + #echo out > /sys/class/gpio/gpio224/direction + #echo out > /sys/class/gpio/gpio225/direction + #echo out > /sys/class/gpio/gpio226/direction + #echo out > /sys/class/gpio/gpio227/direction + #echo out > /sys/class/gpio/gpio228/direction + #echo out > /sys/class/gpio/gpio229/direction + #echo out > /sys/class/gpio/gpio230/direction + #echo out > /sys/class/gpio/gpio231/direction + #echo out > /sys/class/gpio/gpio232/direction + #echo out > /sys/class/gpio/gpio233/direction + #echo out > /sys/class/gpio/gpio234/direction + #echo out > /sys/class/gpio/gpio235/direction + #echo out > /sys/class/gpio/gpio236/direction + #echo out > /sys/class/gpio/gpio237/direction + #echo out > /sys/class/gpio/gpio238/direction + #echo out > /sys/class/gpio/gpio239/direction #QSFP RST echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN5_DEVICE}/new_device - echo 208 > /sys/class/gpio/export #QSFP0 RST - echo 209 > /sys/class/gpio/export #QSFP1 RST - echo 210 > /sys/class/gpio/export #QSFP2 RST - echo 211 > /sys/class/gpio/export #QSFP3 RST - echo 212 > /sys/class/gpio/export #QSFP4 RST - echo 213 > /sys/class/gpio/export #QSFP5 RST - echo 214 > /sys/class/gpio/export #NA - echo 215 > /sys/class/gpio/export #NA - echo 216 > /sys/class/gpio/export #NA - echo 217 > /sys/class/gpio/export #NA - echo 218 > /sys/class/gpio/export #NA - echo 219 > /sys/class/gpio/export #NA - echo 220 > /sys/class/gpio/export #NA - echo 221 > /sys/class/gpio/export #NA - echo 222 > /sys/class/gpio/export #NA - echo 223 > /sys/class/gpio/export #NA - echo out > /sys/class/gpio/gpio208/direction - echo out > /sys/class/gpio/gpio209/direction - echo out > /sys/class/gpio/gpio210/direction - echo out > /sys/class/gpio/gpio211/direction - echo out > /sys/class/gpio/gpio212/direction - echo out > /sys/class/gpio/gpio213/direction - echo 1 > /sys/class/gpio/gpio208/active_low - echo 1 > /sys/class/gpio/gpio209/active_low - echo 1 > /sys/class/gpio/gpio210/active_low - echo 1 > /sys/class/gpio/gpio211/active_low - echo 1 > /sys/class/gpio/gpio212/active_low - echo 1 > /sys/class/gpio/gpio213/active_low - echo 0 > /sys/class/gpio/gpio208/value - echo 0 > /sys/class/gpio/gpio209/value - echo 0 > /sys/class/gpio/gpio210/value - echo 0 > /sys/class/gpio/gpio211/value - echo 0 > /sys/class/gpio/gpio212/value - echo 0 > /sys/class/gpio/gpio213/value + for((i=${GPIO_OFFSET}+208;i<=${GPIO_OFFSET}+213;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + echo low > /sys/class/gpio/gpio${i}/direction + #echo out > /sys/class/gpio/gpio${i}/direction + #echo 0 > /sys/class/gpio/gpio${i}/value + done + for((i=${GPIO_OFFSET}+214;i<=${GPIO_OFFSET}+223;i++)); + do + echo $i > /sys/class/gpio/export + done + + #echo 208 > /sys/class/gpio/export #QSFP0 RST + #echo 209 > /sys/class/gpio/export #QSFP1 RST + #echo 210 > /sys/class/gpio/export #QSFP2 RST + #echo 211 > /sys/class/gpio/export #QSFP3 RST + #echo 212 > /sys/class/gpio/export #QSFP4 RST + #echo 213 > /sys/class/gpio/export #QSFP5 RST + #echo 214 > /sys/class/gpio/export #NA + #echo 215 > /sys/class/gpio/export #NA + #echo 216 > /sys/class/gpio/export #NA + #echo 217 > /sys/class/gpio/export #NA + #echo 218 > /sys/class/gpio/export #NA + #echo 219 > /sys/class/gpio/export #NA + #echo 220 > /sys/class/gpio/export #NA + #echo 221 > /sys/class/gpio/export #NA + #echo 222 > /sys/class/gpio/export #NA + #echo 223 > /sys/class/gpio/export #NA + #echo out > /sys/class/gpio/gpio208/direction + #echo out > /sys/class/gpio/gpio209/direction + #echo out > /sys/class/gpio/gpio210/direction + #echo out > /sys/class/gpio/gpio211/direction + #echo out > /sys/class/gpio/gpio212/direction + #echo out > /sys/class/gpio/gpio213/direction + #echo 1 > /sys/class/gpio/gpio208/active_low + #echo 1 > /sys/class/gpio/gpio209/active_low + #echo 1 > /sys/class/gpio/gpio210/active_low + #echo 1 > /sys/class/gpio/gpio211/active_low + #echo 1 > /sys/class/gpio/gpio212/active_low + #echo 1 > /sys/class/gpio/gpio213/active_low + #echo 0 > /sys/class/gpio/gpio208/value + #echo 0 > /sys/class/gpio/gpio209/value + #echo 0 > /sys/class/gpio/gpio210/value + #echo 0 > /sys/class/gpio/gpio211/value + #echo 0 > /sys/class/gpio/gpio212/value + #echo 0 > /sys/class/gpio/gpio213/value + #SFP+ ABS 0-15 echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/new_device - echo 192 > /sys/class/gpio/export - echo 193 > /sys/class/gpio/export - echo 194 > /sys/class/gpio/export - echo 195 > /sys/class/gpio/export - echo 196 > /sys/class/gpio/export - echo 197 > /sys/class/gpio/export - echo 198 > /sys/class/gpio/export - echo 199 > /sys/class/gpio/export - echo 200 > /sys/class/gpio/export - echo 201 > /sys/class/gpio/export - echo 202 > /sys/class/gpio/export - echo 203 > /sys/class/gpio/export - echo 204 > /sys/class/gpio/export - echo 205 > /sys/class/gpio/export - echo 206 > /sys/class/gpio/export - echo 207 > /sys/class/gpio/export - echo 1 > /sys/class/gpio/gpio192/active_low #SFP+00 - echo 1 > /sys/class/gpio/gpio193/active_low #SFP+01 - echo 1 > /sys/class/gpio/gpio194/active_low #SFP+02 - echo 1 > /sys/class/gpio/gpio195/active_low #SFP+03 - echo 1 > /sys/class/gpio/gpio196/active_low #SFP+04 - echo 1 > /sys/class/gpio/gpio197/active_low #SFP+05 - echo 1 > /sys/class/gpio/gpio198/active_low #SFP+06 - echo 1 > /sys/class/gpio/gpio199/active_low #SFP+07 - echo 1 > /sys/class/gpio/gpio200/active_low #SFP+08 - echo 1 > /sys/class/gpio/gpio201/active_low #SFP+09 - echo 1 > /sys/class/gpio/gpio202/active_low #SFP+10 - echo 1 > /sys/class/gpio/gpio203/active_low #SFP+11 - echo 1 > /sys/class/gpio/gpio204/active_low #SFP+12 - echo 1 > /sys/class/gpio/gpio205/active_low #SFP+13 - echo 1 > /sys/class/gpio/gpio206/active_low #SFP+14 - echo 1 > /sys/class/gpio/gpio207/active_low #SFP+15 + for((i=${GPIO_OFFSET}+192;i<=${GPIO_OFFSET}+207;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #echo 192 > /sys/class/gpio/export + #echo 193 > /sys/class/gpio/export + #echo 194 > /sys/class/gpio/export + #echo 195 > /sys/class/gpio/export + #echo 196 > /sys/class/gpio/export + #echo 197 > /sys/class/gpio/export + #echo 198 > /sys/class/gpio/export + #echo 199 > /sys/class/gpio/export + #echo 200 > /sys/class/gpio/export + #echo 201 > /sys/class/gpio/export + #echo 202 > /sys/class/gpio/export + #echo 203 > /sys/class/gpio/export + #echo 204 > /sys/class/gpio/export + #echo 205 > /sys/class/gpio/export + #echo 206 > /sys/class/gpio/export + #echo 207 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio192/active_low #SFP+00 + #echo 1 > /sys/class/gpio/gpio193/active_low #SFP+01 + #echo 1 > /sys/class/gpio/gpio194/active_low #SFP+02 + #echo 1 > /sys/class/gpio/gpio195/active_low #SFP+03 + #echo 1 > /sys/class/gpio/gpio196/active_low #SFP+04 + #echo 1 > /sys/class/gpio/gpio197/active_low #SFP+05 + #echo 1 > /sys/class/gpio/gpio198/active_low #SFP+06 + #echo 1 > /sys/class/gpio/gpio199/active_low #SFP+07 + #echo 1 > /sys/class/gpio/gpio200/active_low #SFP+08 + #echo 1 > /sys/class/gpio/gpio201/active_low #SFP+09 + #echo 1 > /sys/class/gpio/gpio202/active_low #SFP+10 + #echo 1 > /sys/class/gpio/gpio203/active_low #SFP+11 + #echo 1 > /sys/class/gpio/gpio204/active_low #SFP+12 + #echo 1 > /sys/class/gpio/gpio205/active_low #SFP+13 + #echo 1 > /sys/class/gpio/gpio206/active_low #SFP+14 + #echo 1 > /sys/class/gpio/gpio207/active_low #SFP+15 #SFP+ ABS 16-31 echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/new_device - echo 176 > /sys/class/gpio/export - echo 177 > /sys/class/gpio/export - echo 178 > /sys/class/gpio/export - echo 179 > /sys/class/gpio/export - echo 180 > /sys/class/gpio/export - echo 181 > /sys/class/gpio/export - echo 182 > /sys/class/gpio/export - echo 183 > /sys/class/gpio/export - echo 184 > /sys/class/gpio/export - echo 185 > /sys/class/gpio/export - echo 186 > /sys/class/gpio/export - echo 187 > /sys/class/gpio/export - echo 188 > /sys/class/gpio/export - echo 189 > /sys/class/gpio/export - echo 190 > /sys/class/gpio/export - echo 191 > /sys/class/gpio/export - echo 1 > /sys/class/gpio/gpio176/active_low #SFP+16 - echo 1 > /sys/class/gpio/gpio177/active_low #SFP+17 - echo 1 > /sys/class/gpio/gpio178/active_low #SFP+18 - echo 1 > /sys/class/gpio/gpio179/active_low #SFP+19 - echo 1 > /sys/class/gpio/gpio180/active_low #SFP+20 - echo 1 > /sys/class/gpio/gpio181/active_low #SFP+21 - echo 1 > /sys/class/gpio/gpio182/active_low #SFP+22 - echo 1 > /sys/class/gpio/gpio183/active_low #SFP+23 - echo 1 > /sys/class/gpio/gpio184/active_low #SFP+24 - echo 1 > /sys/class/gpio/gpio185/active_low #SFP+25 - echo 1 > /sys/class/gpio/gpio186/active_low #SFP+26 - echo 1 > /sys/class/gpio/gpio187/active_low #SFP+27 - echo 1 > /sys/class/gpio/gpio188/active_low #SFP+28 - echo 1 > /sys/class/gpio/gpio189/active_low #SFP+29 - echo 1 > /sys/class/gpio/gpio190/active_low #SFP+30 - echo 1 > /sys/class/gpio/gpio191/active_low #SFP+31 + for((i=${GPIO_OFFSET}+176;i<=${GPIO_OFFSET}+191;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #echo 176 > /sys/class/gpio/export + #echo 177 > /sys/class/gpio/export + #echo 178 > /sys/class/gpio/export + #echo 179 > /sys/class/gpio/export + #echo 180 > /sys/class/gpio/export + #echo 181 > /sys/class/gpio/export + #echo 182 > /sys/class/gpio/export + #echo 183 > /sys/class/gpio/export + #echo 184 > /sys/class/gpio/export + #echo 185 > /sys/class/gpio/export + #echo 186 > /sys/class/gpio/export + #echo 187 > /sys/class/gpio/export + #echo 188 > /sys/class/gpio/export + #echo 189 > /sys/class/gpio/export + #echo 190 > /sys/class/gpio/export + #echo 191 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio176/active_low #SFP+16 + #echo 1 > /sys/class/gpio/gpio177/active_low #SFP+17 + #echo 1 > /sys/class/gpio/gpio178/active_low #SFP+18 + #echo 1 > /sys/class/gpio/gpio179/active_low #SFP+19 + #echo 1 > /sys/class/gpio/gpio180/active_low #SFP+20 + #echo 1 > /sys/class/gpio/gpio181/active_low #SFP+21 + #echo 1 > /sys/class/gpio/gpio182/active_low #SFP+22 + #echo 1 > /sys/class/gpio/gpio183/active_low #SFP+23 + #echo 1 > /sys/class/gpio/gpio184/active_low #SFP+24 + #echo 1 > /sys/class/gpio/gpio185/active_low #SFP+25 + #echo 1 > /sys/class/gpio/gpio186/active_low #SFP+26 + #echo 1 > /sys/class/gpio/gpio187/active_low #SFP+27 + #echo 1 > /sys/class/gpio/gpio188/active_low #SFP+28 + #echo 1 > /sys/class/gpio/gpio189/active_low #SFP+29 + #echo 1 > /sys/class/gpio/gpio190/active_low #SFP+30 + #echo 1 > /sys/class/gpio/gpio191/active_low #SFP+31 #SFP+ ABS 32-47 echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/new_device - echo 160 > /sys/class/gpio/export - echo 161 > /sys/class/gpio/export - echo 162 > /sys/class/gpio/export - echo 163 > /sys/class/gpio/export - echo 164 > /sys/class/gpio/export - echo 165 > /sys/class/gpio/export - echo 166 > /sys/class/gpio/export - echo 167 > /sys/class/gpio/export - echo 168 > /sys/class/gpio/export - echo 169 > /sys/class/gpio/export - echo 170 > /sys/class/gpio/export - echo 171 > /sys/class/gpio/export - echo 172 > /sys/class/gpio/export - echo 173 > /sys/class/gpio/export - echo 174 > /sys/class/gpio/export - echo 175 > /sys/class/gpio/export - echo 1 > /sys/class/gpio/gpio160/active_low #SFP+32 - echo 1 > /sys/class/gpio/gpio161/active_low #SFP+33 - echo 1 > /sys/class/gpio/gpio162/active_low #SFP+34 - echo 1 > /sys/class/gpio/gpio163/active_low #SFP+35 - echo 1 > /sys/class/gpio/gpio164/active_low #SFP+36 - echo 1 > /sys/class/gpio/gpio165/active_low #SFP+37 - echo 1 > /sys/class/gpio/gpio166/active_low #SFP+38 - echo 1 > /sys/class/gpio/gpio167/active_low #SFP+39 - echo 1 > /sys/class/gpio/gpio168/active_low #SFP+40 - echo 1 > /sys/class/gpio/gpio169/active_low #SFP+41 - echo 1 > /sys/class/gpio/gpio170/active_low #SFP+42 - echo 1 > /sys/class/gpio/gpio171/active_low #SFP+43 - echo 1 > /sys/class/gpio/gpio172/active_low #SFP+44 - echo 1 > /sys/class/gpio/gpio173/active_low #SFP+45 - echo 1 > /sys/class/gpio/gpio174/active_low #SFP+46 - echo 1 > /sys/class/gpio/gpio175/active_low #SFP+47 + for((i=${GPIO_OFFSET}+160;i<=${GPIO_OFFSET}+175;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #echo 160 > /sys/class/gpio/export + #echo 161 > /sys/class/gpio/export + #echo 162 > /sys/class/gpio/export + #echo 163 > /sys/class/gpio/export + #echo 164 > /sys/class/gpio/export + #echo 165 > /sys/class/gpio/export + #echo 166 > /sys/class/gpio/export + #echo 167 > /sys/class/gpio/export + #echo 168 > /sys/class/gpio/export + #echo 169 > /sys/class/gpio/export + #echo 170 > /sys/class/gpio/export + #echo 171 > /sys/class/gpio/export + #echo 172 > /sys/class/gpio/export + #echo 173 > /sys/class/gpio/export + #echo 174 > /sys/class/gpio/export + #echo 175 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio160/active_low #SFP+32 + #echo 1 > /sys/class/gpio/gpio161/active_low #SFP+33 + #echo 1 > /sys/class/gpio/gpio162/active_low #SFP+34 + #echo 1 > /sys/class/gpio/gpio163/active_low #SFP+35 + #echo 1 > /sys/class/gpio/gpio164/active_low #SFP+36 + #echo 1 > /sys/class/gpio/gpio165/active_low #SFP+37 + #echo 1 > /sys/class/gpio/gpio166/active_low #SFP+38 + #echo 1 > /sys/class/gpio/gpio167/active_low #SFP+39 + #echo 1 > /sys/class/gpio/gpio168/active_low #SFP+40 + #echo 1 > /sys/class/gpio/gpio169/active_low #SFP+41 + #echo 1 > /sys/class/gpio/gpio170/active_low #SFP+42 + #echo 1 > /sys/class/gpio/gpio171/active_low #SFP+43 + #echo 1 > /sys/class/gpio/gpio172/active_low #SFP+44 + #echo 1 > /sys/class/gpio/gpio173/active_low #SFP+45 + #echo 1 > /sys/class/gpio/gpio174/active_low #SFP+46 + #echo 1 > /sys/class/gpio/gpio175/active_low #SFP+47 } @@ -786,7 +851,7 @@ function _i2c_led_fan_tray_status_set { FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then - FAN_TRAY=1 + FAN_TRAY=1 COLOR_LED="green" ONOFF_LED="on" echo "${COLOR_LED} ${ONOFF_LED}" @@ -796,7 +861,7 @@ function _i2c_led_fan_tray_status_set { echo "${COLOR_LED} ${ONOFF_LED}" _i2c_fan_tray_led else - FAN_TRAY=1 + FAN_TRAY=1 COLOR_LED="green" ONOFF_LED="off" echo "${COLOR_LED} ${ONOFF_LED}" @@ -808,7 +873,7 @@ function _i2c_led_fan_tray_status_set { fi if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then - FAN_TRAY=2 + FAN_TRAY=2 COLOR_LED="green" ONOFF_LED="on" echo "${COLOR_LED} ${ONOFF_LED}" @@ -818,7 +883,7 @@ function _i2c_led_fan_tray_status_set { echo "${COLOR_LED} ${ONOFF_LED}" _i2c_fan_tray_led else - FAN_TRAY=2 + FAN_TRAY=2 COLOR_LED="green" ONOFF_LED="off" echo "${COLOR_LED} ${ONOFF_LED}" @@ -830,7 +895,7 @@ function _i2c_led_fan_tray_status_set { fi if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then - FAN_TRAY=3 + FAN_TRAY=3 COLOR_LED="green" ONOFF_LED="on" echo "${COLOR_LED} ${ONOFF_LED}" @@ -840,7 +905,7 @@ function _i2c_led_fan_tray_status_set { echo "${COLOR_LED} ${ONOFF_LED}" _i2c_fan_tray_led else - FAN_TRAY=3 + FAN_TRAY=3 COLOR_LED="green" ONOFF_LED="off" echo "${COLOR_LED} ${ONOFF_LED}" @@ -852,7 +917,7 @@ function _i2c_led_fan_tray_status_set { fi if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then - FAN_TRAY=4 + FAN_TRAY=4 COLOR_LED="green" ONOFF_LED="on" echo "${COLOR_LED} ${ONOFF_LED}" @@ -862,7 +927,7 @@ function _i2c_led_fan_tray_status_set { echo "${COLOR_LED} ${ONOFF_LED}" _i2c_fan_tray_led else - FAN_TRAY=4 + FAN_TRAY=4 COLOR_LED="green" ONOFF_LED="off" echo "${COLOR_LED} ${ONOFF_LED}" @@ -1038,43 +1103,50 @@ function _qsfp_port_i2c_var_set { i2cbus=${NUM_MUX2_CHAN0_DEVICE} regAddr=0x20 dataAddr=0 - gpioBase=${ZQSFP_PORT0_15_ABS_GPIO_IDX} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT0_15_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT0_15_ABS_GPIO_IDX} ;; 9|10|11|12|13|14|15|16) i2cbus=${NUM_MUX2_CHAN0_DEVICE} regAddr=0x20 dataAddr=1 - gpioBase=${ZQSFP_PORT0_15_ABS_GPIO_IDX} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT0_15_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT0_15_ABS_GPIO_IDX} ;; 17|18|19|20|21|22|23|24) i2cbus=${NUM_MUX2_CHAN0_DEVICE} regAddr=0x21 dataAddr=0 - gpioBase=${ZQSFP_PORT16_31_ABS_GPIO_IDX} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT16_31_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT16_31_ABS_GPIO_IDX} ;; 25|26|27|28|29|30|31|32) i2cbus=${NUM_MUX2_CHAN0_DEVICE} regAddr=0x21 dataAddr=1 - gpioBase=${ZQSFP_PORT16_31_ABS_GPIO_IDX} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT16_31_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT16_31_ABS_GPIO_IDX} ;; 33|34|35|36|37|38|39|40) i2cbus=${NUM_MUX2_CHAN0_DEVICE} regAddr=0x22 dataAddr=0 - gpioBase=${ZQSFP_PORT32_47_ABS_GPIO_IDX} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT32_47_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT32_47_ABS_GPIO_IDX} ;; 41|42|43|44|45|46|47|48) i2cbus=${NUM_MUX2_CHAN0_DEVICE} regAddr=0x22 dataAddr=1 - gpioBase=${ZQSFP_PORT32_47_ABS_GPIO_IDX} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT32_47_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT32_47_ABS_GPIO_IDX} ;; 49|50|51|52|53|54) i2cbus=${NUM_MUX2_CHAN0_DEVICE} regAddr=0x23 dataAddr=0 - gpioBase=$((240 - 48)) + gpioBase=$((${GPIO_OFFSET}+240-48)) + #gpioBase=$((240 - 48)) ;; *) echo "Please input 1~54" @@ -1399,6 +1471,7 @@ function _main { tart_time_str=`date` start_time_sec=$(date +%s) + _set_gpio_offset if [ "${EXEC_FUNC}" == "help" ]; then _help elif [ "${EXEC_FUNC}" == "i2c_init" ]; then @@ -1472,14 +1545,17 @@ function _main { exit ${FALSE} fi - end_time_str=`date` - end_time_sec=$(date +%s) - diff_time=$[ ${end_time_sec} - ${start_time_sec} ] - echo "Start Time: ${start_time_str} (${start_time_sec})" - echo "End Time : ${end_time_str} (${end_time_sec})" - echo "Total Execution Time: ${diff_time} sec" + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" - echo "done!!!" + echo "done!!!" + fi } _main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/i2c_utils.sh index cd33df48bd4f..e1df54ad0fe2 100644 --- a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/i2c_utils.sh +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/i2c_utils.sh @@ -15,6 +15,9 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . +# trun on for more debug output +#DEBUG="on" + VERSION="1.0.0" TRUE=200 FALSE=404 @@ -1144,14 +1147,17 @@ function _main { exit ${FALSE} fi - end_time_str=`date` - end_time_sec=$(date +%s) - diff_time=$[ ${end_time_sec} - ${start_time_sec} ] - echo "Start Time: ${start_time_str} (${start_time_sec})" - echo "End Time : ${end_time_str} (${end_time_sec})" - echo "Total Execution Time: ${diff_time} sec" + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" - echo "done!!!" + echo "done!!!" + fi } _main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/i2c_utils.sh index bdcd4f1d7f9e..4aefe153a67b 100755 --- a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/i2c_utils.sh +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/i2c_utils.sh @@ -15,7 +15,10 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -VERSION="1.0.0" +# trun on for more debug output +#DEBUG="on" + +VERSION="1.1.0" TRUE=200 FALSE=404 @@ -78,10 +81,14 @@ PSU_DC_OFF=0 PSU_EXIST=1 PSU_NOT_EXIST=0 +#GPIO Offset +GPIO_OFFSET=0 + # Help usage function function _help { echo "=========================================================" echo "# Description: Help Function" + echo "# Version : ${VERSION}" echo "=========================================================" echo "----------------------------------------------------" echo "EX : ${0} help" @@ -191,7 +198,9 @@ function _i2c_init { modprobe gpio-pca953x _i2c_fan_init _i2c_io_exp_init + rmmod gpio_ich _i2c_gpio_init + modprobe gpio_ich _i2c_cpld_init _i2c_qsfp_eeprom_init "new" _i2c_mb_eeprom_init "new" @@ -367,351 +376,420 @@ function _i2c_io_exp_init { i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x20 7 0xCC } +# To set the global variable GPIO_OFFSET +function _set_gpio_offset { + GPIO_OFFSET=0 + for d in `ls /sys/class/gpio/ | grep gpiochip` + do + gpiochip_no=${d##gpiochip} + if [ $gpiochip_no -gt 255 ]; then + GPIO_OFFSET=256 + break + fi + done + #echo "set GPIO_OFFSET=${GPIO_OFFSET}" +} + #GPIO Init function _i2c_gpio_init { - #ABS Port 0-15 + #ABS Port 0-15 (zQSFP00 ~ zQSFP15) echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - echo 240 > /sys/class/gpio/export - echo 241 > /sys/class/gpio/export - echo 242 > /sys/class/gpio/export - echo 243 > /sys/class/gpio/export - echo 244 > /sys/class/gpio/export - echo 245 > /sys/class/gpio/export - echo 246 > /sys/class/gpio/export - echo 247 > /sys/class/gpio/export - echo 248 > /sys/class/gpio/export - echo 249 > /sys/class/gpio/export - echo 250 > /sys/class/gpio/export - echo 251 > /sys/class/gpio/export - echo 252 > /sys/class/gpio/export - echo 253 > /sys/class/gpio/export - echo 254 > /sys/class/gpio/export - echo 255 > /sys/class/gpio/export - echo 1 > /sys/class/gpio/gpio241/active_low #zQSFP00 - echo 1 > /sys/class/gpio/gpio240/active_low #zQSFP01 - echo 1 > /sys/class/gpio/gpio243/active_low #zQSFP02 - echo 1 > /sys/class/gpio/gpio242/active_low #zQSFP03 - echo 1 > /sys/class/gpio/gpio245/active_low #zQSFP04 - echo 1 > /sys/class/gpio/gpio244/active_low #zQSFP05 - echo 1 > /sys/class/gpio/gpio247/active_low #zQSFP06 - echo 1 > /sys/class/gpio/gpio246/active_low #zQSFP07 - echo 1 > /sys/class/gpio/gpio249/active_low #zQSFP08 - echo 1 > /sys/class/gpio/gpio248/active_low #zQSFP09 - echo 1 > /sys/class/gpio/gpio251/active_low #zQSFP10 - echo 1 > /sys/class/gpio/gpio250/active_low #zQSFP11 - echo 1 > /sys/class/gpio/gpio253/active_low #zQSFP12 - echo 1 > /sys/class/gpio/gpio252/active_low #zQSFP13 - echo 1 > /sys/class/gpio/gpio255/active_low #zQSFP14 - echo 1 > /sys/class/gpio/gpio254/active_low #zQSFP15 - - #ABS Port 16-31 + _set_gpio_offset + for((i=${GPIO_OFFSET}+240;i<=${GPIO_OFFSET}+255;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #echo 240 > /sys/class/gpio/export + #echo 241 > /sys/class/gpio/export + #echo 242 > /sys/class/gpio/export + #echo 243 > /sys/class/gpio/export + #echo 244 > /sys/class/gpio/export + #echo 245 > /sys/class/gpio/export + #echo 246 > /sys/class/gpio/export + #echo 247 > /sys/class/gpio/export + #echo 248 > /sys/class/gpio/export + #echo 249 > /sys/class/gpio/export + #echo 250 > /sys/class/gpio/export + #echo 251 > /sys/class/gpio/export + #echo 252 > /sys/class/gpio/export + #echo 253 > /sys/class/gpio/export + #echo 254 > /sys/class/gpio/export + #echo 255 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio241/active_low #zQSFP00 + #echo 1 > /sys/class/gpio/gpio240/active_low #zQSFP01 + #echo 1 > /sys/class/gpio/gpio243/active_low #zQSFP02 + #echo 1 > /sys/class/gpio/gpio242/active_low #zQSFP03 + #echo 1 > /sys/class/gpio/gpio245/active_low #zQSFP04 + #echo 1 > /sys/class/gpio/gpio244/active_low #zQSFP05 + #echo 1 > /sys/class/gpio/gpio247/active_low #zQSFP06 + #echo 1 > /sys/class/gpio/gpio246/active_low #zQSFP07 + #echo 1 > /sys/class/gpio/gpio249/active_low #zQSFP08 + #echo 1 > /sys/class/gpio/gpio248/active_low #zQSFP09 + #echo 1 > /sys/class/gpio/gpio251/active_low #zQSFP10 + #echo 1 > /sys/class/gpio/gpio250/active_low #zQSFP11 + #echo 1 > /sys/class/gpio/gpio253/active_low #zQSFP12 + #echo 1 > /sys/class/gpio/gpio252/active_low #zQSFP13 + #echo 1 > /sys/class/gpio/gpio255/active_low #zQSFP14 + #echo 1 > /sys/class/gpio/gpio254/active_low #zQSFP15 + + #ABS Port 16-31 (zQSFP16 ~ zQSFP31) echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - echo 224 > /sys/class/gpio/export - echo 225 > /sys/class/gpio/export - echo 226 > /sys/class/gpio/export - echo 227 > /sys/class/gpio/export - echo 228 > /sys/class/gpio/export - echo 229 > /sys/class/gpio/export - echo 230 > /sys/class/gpio/export - echo 231 > /sys/class/gpio/export - echo 232 > /sys/class/gpio/export - echo 233 > /sys/class/gpio/export - echo 234 > /sys/class/gpio/export - echo 235 > /sys/class/gpio/export - echo 236 > /sys/class/gpio/export - echo 237 > /sys/class/gpio/export - echo 238 > /sys/class/gpio/export - echo 239 > /sys/class/gpio/export - echo 1 > /sys/class/gpio/gpio225/active_low #zQSFP16 - echo 1 > /sys/class/gpio/gpio224/active_low #zQSFP17 - echo 1 > /sys/class/gpio/gpio227/active_low #zQSFP18 - echo 1 > /sys/class/gpio/gpio226/active_low #zQSFP19 - echo 1 > /sys/class/gpio/gpio229/active_low #zQSFP20 - echo 1 > /sys/class/gpio/gpio228/active_low #zQSFP21 - echo 1 > /sys/class/gpio/gpio231/active_low #zQSFP22 - echo 1 > /sys/class/gpio/gpio230/active_low #zQSFP23 - echo 1 > /sys/class/gpio/gpio233/active_low #zQSFP24 - echo 1 > /sys/class/gpio/gpio232/active_low #zQSFP25 - echo 1 > /sys/class/gpio/gpio235/active_low #zQSFP26 - echo 1 > /sys/class/gpio/gpio234/active_low #zQSFP27 - echo 1 > /sys/class/gpio/gpio237/active_low #zQSFP28 - echo 1 > /sys/class/gpio/gpio236/active_low #zQSFP29 - echo 1 > /sys/class/gpio/gpio239/active_low #zQSFP30 - echo 1 > /sys/class/gpio/gpio238/active_low #zQSFP31 - - #INT Port 0-15 + for((i=${GPIO_OFFSET}+224;i<=${GPIO_OFFSET}+239;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #echo 224 > /sys/class/gpio/export + #echo 225 > /sys/class/gpio/export + #echo 226 > /sys/class/gpio/export + #echo 227 > /sys/class/gpio/export + #echo 228 > /sys/class/gpio/export + #echo 229 > /sys/class/gpio/export + #echo 230 > /sys/class/gpio/export + #echo 231 > /sys/class/gpio/export + #echo 232 > /sys/class/gpio/export + #echo 233 > /sys/class/gpio/export + #echo 234 > /sys/class/gpio/export + #echo 235 > /sys/class/gpio/export + #echo 236 > /sys/class/gpio/export + #echo 237 > /sys/class/gpio/export + #echo 238 > /sys/class/gpio/export + #echo 239 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio225/active_low #zQSFP16 + #echo 1 > /sys/class/gpio/gpio224/active_low #zQSFP17 + #echo 1 > /sys/class/gpio/gpio227/active_low #zQSFP18 + #echo 1 > /sys/class/gpio/gpio226/active_low #zQSFP19 + #echo 1 > /sys/class/gpio/gpio229/active_low #zQSFP20 + #echo 1 > /sys/class/gpio/gpio228/active_low #zQSFP21 + #echo 1 > /sys/class/gpio/gpio231/active_low #zQSFP22 + #echo 1 > /sys/class/gpio/gpio230/active_low #zQSFP23 + #echo 1 > /sys/class/gpio/gpio233/active_low #zQSFP24 + #echo 1 > /sys/class/gpio/gpio232/active_low #zQSFP25 + #echo 1 > /sys/class/gpio/gpio235/active_low #zQSFP26 + #echo 1 > /sys/class/gpio/gpio234/active_low #zQSFP27 + #echo 1 > /sys/class/gpio/gpio237/active_low #zQSFP28 + #echo 1 > /sys/class/gpio/gpio236/active_low #zQSFP29 + #echo 1 > /sys/class/gpio/gpio239/active_low #zQSFP30 + #echo 1 > /sys/class/gpio/gpio238/active_low #zQSFP31 + + #INT Port 0-15 (zQSFP00 ~ zQSFP15) echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - echo 208 > /sys/class/gpio/export - echo 209 > /sys/class/gpio/export - echo 210 > /sys/class/gpio/export - echo 211 > /sys/class/gpio/export - echo 212 > /sys/class/gpio/export - echo 213 > /sys/class/gpio/export - echo 214 > /sys/class/gpio/export - echo 215 > /sys/class/gpio/export - echo 216 > /sys/class/gpio/export - echo 217 > /sys/class/gpio/export - echo 218 > /sys/class/gpio/export - echo 219 > /sys/class/gpio/export - echo 220 > /sys/class/gpio/export - echo 221 > /sys/class/gpio/export - echo 222 > /sys/class/gpio/export - echo 223 > /sys/class/gpio/export - echo 1 > /sys/class/gpio/gpio208/active_low - echo 1 > /sys/class/gpio/gpio209/active_low - echo 1 > /sys/class/gpio/gpio210/active_low - echo 1 > /sys/class/gpio/gpio211/active_low - echo 1 > /sys/class/gpio/gpio212/active_low - echo 1 > /sys/class/gpio/gpio213/active_low - echo 1 > /sys/class/gpio/gpio214/active_low - echo 1 > /sys/class/gpio/gpio215/active_low - echo 1 > /sys/class/gpio/gpio216/active_low - echo 1 > /sys/class/gpio/gpio217/active_low - echo 1 > /sys/class/gpio/gpio218/active_low - echo 1 > /sys/class/gpio/gpio219/active_low - echo 1 > /sys/class/gpio/gpio220/active_low - echo 1 > /sys/class/gpio/gpio221/active_low - echo 1 > /sys/class/gpio/gpio222/active_low - echo 1 > /sys/class/gpio/gpio223/active_low - - #INT Port 16-31 + for((i=${GPIO_OFFSET}+208;i<=${GPIO_OFFSET}+223;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #echo 208 > /sys/class/gpio/export + #echo 209 > /sys/class/gpio/export + #echo 210 > /sys/class/gpio/export + #echo 211 > /sys/class/gpio/export + #echo 212 > /sys/class/gpio/export + #echo 213 > /sys/class/gpio/export + #echo 214 > /sys/class/gpio/export + #echo 215 > /sys/class/gpio/export + #echo 216 > /sys/class/gpio/export + #echo 217 > /sys/class/gpio/export + #echo 218 > /sys/class/gpio/export + #echo 219 > /sys/class/gpio/export + #echo 220 > /sys/class/gpio/export + #echo 221 > /sys/class/gpio/export + #echo 222 > /sys/class/gpio/export + #echo 223 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio208/active_low + #echo 1 > /sys/class/gpio/gpio209/active_low + #echo 1 > /sys/class/gpio/gpio210/active_low + #echo 1 > /sys/class/gpio/gpio211/active_low + #echo 1 > /sys/class/gpio/gpio212/active_low + #echo 1 > /sys/class/gpio/gpio213/active_low + #echo 1 > /sys/class/gpio/gpio214/active_low + #echo 1 > /sys/class/gpio/gpio215/active_low + #echo 1 > /sys/class/gpio/gpio216/active_low + #echo 1 > /sys/class/gpio/gpio217/active_low + #echo 1 > /sys/class/gpio/gpio218/active_low + #echo 1 > /sys/class/gpio/gpio219/active_low + #echo 1 > /sys/class/gpio/gpio220/active_low + #echo 1 > /sys/class/gpio/gpio221/active_low + #echo 1 > /sys/class/gpio/gpio222/active_low + #echo 1 > /sys/class/gpio/gpio223/active_low + + #INT Port 16-31 (zQSFP16 ~ zQSFP31) echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device - echo 192 > /sys/class/gpio/export - echo 193 > /sys/class/gpio/export - echo 194 > /sys/class/gpio/export - echo 195 > /sys/class/gpio/export - echo 196 > /sys/class/gpio/export - echo 197 > /sys/class/gpio/export - echo 198 > /sys/class/gpio/export - echo 199 > /sys/class/gpio/export - echo 200 > /sys/class/gpio/export - echo 201 > /sys/class/gpio/export - echo 202 > /sys/class/gpio/export - echo 203 > /sys/class/gpio/export - echo 204 > /sys/class/gpio/export - echo 205 > /sys/class/gpio/export - echo 206 > /sys/class/gpio/export - echo 207 > /sys/class/gpio/export - echo 1 > /sys/class/gpio/gpio192/active_low - echo 1 > /sys/class/gpio/gpio193/active_low - echo 1 > /sys/class/gpio/gpio194/active_low - echo 1 > /sys/class/gpio/gpio195/active_low - echo 1 > /sys/class/gpio/gpio196/active_low - echo 1 > /sys/class/gpio/gpio197/active_low - echo 1 > /sys/class/gpio/gpio198/active_low - echo 1 > /sys/class/gpio/gpio199/active_low - echo 1 > /sys/class/gpio/gpio200/active_low - echo 1 > /sys/class/gpio/gpio201/active_low - echo 1 > /sys/class/gpio/gpio202/active_low - echo 1 > /sys/class/gpio/gpio203/active_low - echo 1 > /sys/class/gpio/gpio204/active_low - echo 1 > /sys/class/gpio/gpio205/active_low - echo 1 > /sys/class/gpio/gpio206/active_low - echo 1 > /sys/class/gpio/gpio207/active_low + for((i=${GPIO_OFFSET}+192;i<=${GPIO_OFFSET}+207;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #echo 192 > /sys/class/gpio/export + #echo 193 > /sys/class/gpio/export + #echo 194 > /sys/class/gpio/export + #echo 195 > /sys/class/gpio/export + #echo 196 > /sys/class/gpio/export + #echo 197 > /sys/class/gpio/export + #echo 198 > /sys/class/gpio/export + #echo 199 > /sys/class/gpio/export + #echo 200 > /sys/class/gpio/export + #echo 201 > /sys/class/gpio/export + #echo 202 > /sys/class/gpio/export + #echo 203 > /sys/class/gpio/export + #echo 204 > /sys/class/gpio/export + #echo 205 > /sys/class/gpio/export + #echo 206 > /sys/class/gpio/export + #echo 207 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio192/active_low + #echo 1 > /sys/class/gpio/gpio193/active_low + #echo 1 > /sys/class/gpio/gpio194/active_low + #echo 1 > /sys/class/gpio/gpio195/active_low + #echo 1 > /sys/class/gpio/gpio196/active_low + #echo 1 > /sys/class/gpio/gpio197/active_low + #echo 1 > /sys/class/gpio/gpio198/active_low + #echo 1 > /sys/class/gpio/gpio199/active_low + #echo 1 > /sys/class/gpio/gpio200/active_low + #echo 1 > /sys/class/gpio/gpio201/active_low + #echo 1 > /sys/class/gpio/gpio202/active_low + #echo 1 > /sys/class/gpio/gpio203/active_low + #echo 1 > /sys/class/gpio/gpio204/active_low + #echo 1 > /sys/class/gpio/gpio205/active_low + #echo 1 > /sys/class/gpio/gpio206/active_low + #echo 1 > /sys/class/gpio/gpio207/active_low #LP Mode Port 0-15 echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device - echo 176 > /sys/class/gpio/export - echo 177 > /sys/class/gpio/export - echo 178 > /sys/class/gpio/export - echo 179 > /sys/class/gpio/export - echo 180 > /sys/class/gpio/export - echo 181 > /sys/class/gpio/export - echo 182 > /sys/class/gpio/export - echo 183 > /sys/class/gpio/export - echo 184 > /sys/class/gpio/export - echo 185 > /sys/class/gpio/export - echo 186 > /sys/class/gpio/export - echo 187 > /sys/class/gpio/export - echo 188 > /sys/class/gpio/export - echo 189 > /sys/class/gpio/export - echo 190 > /sys/class/gpio/export - echo 191 > /sys/class/gpio/export - echo out > /sys/class/gpio/gpio176/direction - echo out > /sys/class/gpio/gpio177/direction - echo out > /sys/class/gpio/gpio178/direction - echo out > /sys/class/gpio/gpio179/direction - echo out > /sys/class/gpio/gpio180/direction - echo out > /sys/class/gpio/gpio181/direction - echo out > /sys/class/gpio/gpio182/direction - echo out > /sys/class/gpio/gpio183/direction - echo out > /sys/class/gpio/gpio184/direction - echo out > /sys/class/gpio/gpio185/direction - echo out > /sys/class/gpio/gpio186/direction - echo out > /sys/class/gpio/gpio187/direction - echo out > /sys/class/gpio/gpio188/direction - echo out > /sys/class/gpio/gpio189/direction - echo out > /sys/class/gpio/gpio190/direction - echo out > /sys/class/gpio/gpio191/direction + for((i=${GPIO_OFFSET}+176;i<=${GPIO_OFFSET}+191;i++)); + do + echo $i > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio${i}/direction + done + + #echo 176 > /sys/class/gpio/export + #echo 177 > /sys/class/gpio/export + #echo 178 > /sys/class/gpio/export + #echo 179 > /sys/class/gpio/export + #echo 180 > /sys/class/gpio/export + #echo 181 > /sys/class/gpio/export + #echo 182 > /sys/class/gpio/export + #echo 183 > /sys/class/gpio/export + #echo 184 > /sys/class/gpio/export + #echo 185 > /sys/class/gpio/export + #echo 186 > /sys/class/gpio/export + #echo 187 > /sys/class/gpio/export + #echo 188 > /sys/class/gpio/export + #echo 189 > /sys/class/gpio/export + #echo 190 > /sys/class/gpio/export + #echo 191 > /sys/class/gpio/export + #echo out > /sys/class/gpio/gpio176/direction + #echo out > /sys/class/gpio/gpio177/direction + #echo out > /sys/class/gpio/gpio178/direction + #echo out > /sys/class/gpio/gpio179/direction + #echo out > /sys/class/gpio/gpio180/direction + #echo out > /sys/class/gpio/gpio181/direction + #echo out > /sys/class/gpio/gpio182/direction + #echo out > /sys/class/gpio/gpio183/direction + #echo out > /sys/class/gpio/gpio184/direction + #echo out > /sys/class/gpio/gpio185/direction + #echo out > /sys/class/gpio/gpio186/direction + #echo out > /sys/class/gpio/gpio187/direction + #echo out > /sys/class/gpio/gpio188/direction + #echo out > /sys/class/gpio/gpio189/direction + #echo out > /sys/class/gpio/gpio190/direction + #echo out > /sys/class/gpio/gpio191/direction #LP Mode Port 16-31 echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device - echo 160 > /sys/class/gpio/export - echo 161 > /sys/class/gpio/export - echo 162 > /sys/class/gpio/export - echo 163 > /sys/class/gpio/export - echo 164 > /sys/class/gpio/export - echo 165 > /sys/class/gpio/export - echo 166 > /sys/class/gpio/export - echo 167 > /sys/class/gpio/export - echo 168 > /sys/class/gpio/export - echo 169 > /sys/class/gpio/export - echo 170 > /sys/class/gpio/export - echo 171 > /sys/class/gpio/export - echo 172 > /sys/class/gpio/export - echo 173 > /sys/class/gpio/export - echo 174 > /sys/class/gpio/export - echo 175 > /sys/class/gpio/export - echo out > /sys/class/gpio/gpio160/direction - echo out > /sys/class/gpio/gpio161/direction - echo out > /sys/class/gpio/gpio162/direction - echo out > /sys/class/gpio/gpio163/direction - echo out > /sys/class/gpio/gpio164/direction - echo out > /sys/class/gpio/gpio165/direction - echo out > /sys/class/gpio/gpio166/direction - echo out > /sys/class/gpio/gpio167/direction - echo out > /sys/class/gpio/gpio168/direction - echo out > /sys/class/gpio/gpio169/direction - echo out > /sys/class/gpio/gpio170/direction - echo out > /sys/class/gpio/gpio171/direction - echo out > /sys/class/gpio/gpio172/direction - echo out > /sys/class/gpio/gpio173/direction - echo out > /sys/class/gpio/gpio174/direction - echo out > /sys/class/gpio/gpio175/direction + for((i=${GPIO_OFFSET}+160;i<=${GPIO_OFFSET}+175;i++)); + do + echo $i > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio${i}/direction + done + + #echo 160 > /sys/class/gpio/export + #echo 161 > /sys/class/gpio/export + #echo 162 > /sys/class/gpio/export + #echo 163 > /sys/class/gpio/export + #echo 164 > /sys/class/gpio/export + #echo 165 > /sys/class/gpio/export + #echo 166 > /sys/class/gpio/export + #echo 167 > /sys/class/gpio/export + #echo 168 > /sys/class/gpio/export + #echo 169 > /sys/class/gpio/export + #echo 170 > /sys/class/gpio/export + #echo 171 > /sys/class/gpio/export + #echo 172 > /sys/class/gpio/export + #echo 173 > /sys/class/gpio/export + #echo 174 > /sys/class/gpio/export + #echo 175 > /sys/class/gpio/export + #echo out > /sys/class/gpio/gpio160/direction + #echo out > /sys/class/gpio/gpio161/direction + #echo out > /sys/class/gpio/gpio162/direction + #echo out > /sys/class/gpio/gpio163/direction + #echo out > /sys/class/gpio/gpio164/direction + #echo out > /sys/class/gpio/gpio165/direction + #echo out > /sys/class/gpio/gpio166/direction + #echo out > /sys/class/gpio/gpio167/direction + #echo out > /sys/class/gpio/gpio168/direction + #echo out > /sys/class/gpio/gpio169/direction + #echo out > /sys/class/gpio/gpio170/direction + #echo out > /sys/class/gpio/gpio171/direction + #echo out > /sys/class/gpio/gpio172/direction + #echo out > /sys/class/gpio/gpio173/direction + #echo out > /sys/class/gpio/gpio174/direction + #echo out > /sys/class/gpio/gpio175/direction #RST Port 0-15 echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device - echo 144 > /sys/class/gpio/export - echo 145 > /sys/class/gpio/export - echo 146 > /sys/class/gpio/export - echo 147 > /sys/class/gpio/export - echo 148 > /sys/class/gpio/export - echo 149 > /sys/class/gpio/export - echo 150 > /sys/class/gpio/export - echo 151 > /sys/class/gpio/export - echo 152 > /sys/class/gpio/export - echo 153 > /sys/class/gpio/export - echo 154 > /sys/class/gpio/export - echo 155 > /sys/class/gpio/export - echo 156 > /sys/class/gpio/export - echo 157 > /sys/class/gpio/export - echo 158 > /sys/class/gpio/export - echo 159 > /sys/class/gpio/export - echo out > /sys/class/gpio/gpio144/direction - echo out > /sys/class/gpio/gpio145/direction - echo out > /sys/class/gpio/gpio146/direction - echo out > /sys/class/gpio/gpio147/direction - echo out > /sys/class/gpio/gpio148/direction - echo out > /sys/class/gpio/gpio149/direction - echo out > /sys/class/gpio/gpio150/direction - echo out > /sys/class/gpio/gpio151/direction - echo out > /sys/class/gpio/gpio152/direction - echo out > /sys/class/gpio/gpio153/direction - echo out > /sys/class/gpio/gpio154/direction - echo out > /sys/class/gpio/gpio155/direction - echo out > /sys/class/gpio/gpio156/direction - echo out > /sys/class/gpio/gpio157/direction - echo out > /sys/class/gpio/gpio158/direction - echo out > /sys/class/gpio/gpio159/direction - echo 1 > /sys/class/gpio/gpio144/active_low - echo 1 > /sys/class/gpio/gpio145/active_low - echo 1 > /sys/class/gpio/gpio146/active_low - echo 1 > /sys/class/gpio/gpio147/active_low - echo 1 > /sys/class/gpio/gpio148/active_low - echo 1 > /sys/class/gpio/gpio149/active_low - echo 1 > /sys/class/gpio/gpio150/active_low - echo 1 > /sys/class/gpio/gpio151/active_low - echo 1 > /sys/class/gpio/gpio152/active_low - echo 1 > /sys/class/gpio/gpio153/active_low - echo 1 > /sys/class/gpio/gpio154/active_low - echo 1 > /sys/class/gpio/gpio155/active_low - echo 1 > /sys/class/gpio/gpio156/active_low - echo 1 > /sys/class/gpio/gpio157/active_low - echo 1 > /sys/class/gpio/gpio158/active_low - echo 1 > /sys/class/gpio/gpio159/active_low - echo 0 > /sys/class/gpio/gpio144/value - echo 0 > /sys/class/gpio/gpio145/value - echo 0 > /sys/class/gpio/gpio146/value - echo 0 > /sys/class/gpio/gpio147/value - echo 0 > /sys/class/gpio/gpio148/value - echo 0 > /sys/class/gpio/gpio149/value - echo 0 > /sys/class/gpio/gpio150/value - echo 0 > /sys/class/gpio/gpio151/value - echo 0 > /sys/class/gpio/gpio152/value - echo 0 > /sys/class/gpio/gpio153/value - echo 0 > /sys/class/gpio/gpio154/value - echo 0 > /sys/class/gpio/gpio155/value - echo 0 > /sys/class/gpio/gpio156/value - echo 0 > /sys/class/gpio/gpio157/value - echo 0 > /sys/class/gpio/gpio158/value - echo 0 > /sys/class/gpio/gpio159/value + for((i=${GPIO_OFFSET}+144;i<=${GPIO_OFFSET}+159;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + echo low > /sys/class/gpio/gpio${i}/direction + #echo out > /sys/class/gpio/gpio${i}/direction + #echo 0 > /sys/class/gpio/gpio${i}/value + done + + #echo 144 > /sys/class/gpio/export + #echo 145 > /sys/class/gpio/export + #echo 146 > /sys/class/gpio/export + #echo 147 > /sys/class/gpio/export + #echo 148 > /sys/class/gpio/export + #echo 149 > /sys/class/gpio/export + #echo 150 > /sys/class/gpio/export + #echo 151 > /sys/class/gpio/export + #echo 152 > /sys/class/gpio/export + #echo 153 > /sys/class/gpio/export + #echo 154 > /sys/class/gpio/export + #echo 155 > /sys/class/gpio/export + #echo 156 > /sys/class/gpio/export + #echo 157 > /sys/class/gpio/export + #echo 158 > /sys/class/gpio/export + #echo 159 > /sys/class/gpio/export + #echo out > /sys/class/gpio/gpio144/direction + #echo out > /sys/class/gpio/gpio145/direction + #echo out > /sys/class/gpio/gpio146/direction + #echo out > /sys/class/gpio/gpio147/direction + #echo out > /sys/class/gpio/gpio148/direction + #echo out > /sys/class/gpio/gpio149/direction + #echo out > /sys/class/gpio/gpio150/direction + #echo out > /sys/class/gpio/gpio151/direction + #echo out > /sys/class/gpio/gpio152/direction + #echo out > /sys/class/gpio/gpio153/direction + #echo out > /sys/class/gpio/gpio154/direction + #echo out > /sys/class/gpio/gpio155/direction + #echo out > /sys/class/gpio/gpio156/direction + #echo out > /sys/class/gpio/gpio157/direction + #echo out > /sys/class/gpio/gpio158/direction + #echo out > /sys/class/gpio/gpio159/direction + #echo 1 > /sys/class/gpio/gpio144/active_low + #echo 1 > /sys/class/gpio/gpio145/active_low + #echo 1 > /sys/class/gpio/gpio146/active_low + #echo 1 > /sys/class/gpio/gpio147/active_low + #echo 1 > /sys/class/gpio/gpio148/active_low + #echo 1 > /sys/class/gpio/gpio149/active_low + #echo 1 > /sys/class/gpio/gpio150/active_low + #echo 1 > /sys/class/gpio/gpio151/active_low + #echo 1 > /sys/class/gpio/gpio152/active_low + #echo 1 > /sys/class/gpio/gpio153/active_low + #echo 1 > /sys/class/gpio/gpio154/active_low + #echo 1 > /sys/class/gpio/gpio155/active_low + #echo 1 > /sys/class/gpio/gpio156/active_low + #echo 1 > /sys/class/gpio/gpio157/active_low + #echo 1 > /sys/class/gpio/gpio158/active_low + #echo 1 > /sys/class/gpio/gpio159/active_low + #echo 0 > /sys/class/gpio/gpio144/value + #echo 0 > /sys/class/gpio/gpio145/value + #echo 0 > /sys/class/gpio/gpio146/value + #echo 0 > /sys/class/gpio/gpio147/value + #echo 0 > /sys/class/gpio/gpio148/value + #echo 0 > /sys/class/gpio/gpio149/value + #echo 0 > /sys/class/gpio/gpio150/value + #echo 0 > /sys/class/gpio/gpio151/value + #echo 0 > /sys/class/gpio/gpio152/value + #echo 0 > /sys/class/gpio/gpio153/value + #echo 0 > /sys/class/gpio/gpio154/value + #echo 0 > /sys/class/gpio/gpio155/value + #echo 0 > /sys/class/gpio/gpio156/value + #echo 0 > /sys/class/gpio/gpio157/value + #echo 0 > /sys/class/gpio/gpio158/value + #echo 0 > /sys/class/gpio/gpio159/value #RST Port 16-31 echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device - echo 128 > /sys/class/gpio/export - echo 129 > /sys/class/gpio/export - echo 130 > /sys/class/gpio/export - echo 131 > /sys/class/gpio/export - echo 132 > /sys/class/gpio/export - echo 133 > /sys/class/gpio/export - echo 134 > /sys/class/gpio/export - echo 135 > /sys/class/gpio/export - echo 136 > /sys/class/gpio/export - echo 137 > /sys/class/gpio/export - echo 138 > /sys/class/gpio/export - echo 139 > /sys/class/gpio/export - echo 140 > /sys/class/gpio/export - echo 141 > /sys/class/gpio/export - echo 142 > /sys/class/gpio/export - echo 143 > /sys/class/gpio/export - echo out > /sys/class/gpio/gpio128/direction - echo out > /sys/class/gpio/gpio129/direction - echo out > /sys/class/gpio/gpio130/direction - echo out > /sys/class/gpio/gpio131/direction - echo out > /sys/class/gpio/gpio132/direction - echo out > /sys/class/gpio/gpio133/direction - echo out > /sys/class/gpio/gpio134/direction - echo out > /sys/class/gpio/gpio135/direction - echo out > /sys/class/gpio/gpio136/direction - echo out > /sys/class/gpio/gpio137/direction - echo out > /sys/class/gpio/gpio138/direction - echo out > /sys/class/gpio/gpio139/direction - echo out > /sys/class/gpio/gpio140/direction - echo out > /sys/class/gpio/gpio141/direction - echo out > /sys/class/gpio/gpio142/direction - echo out > /sys/class/gpio/gpio143/direction - echo 1 > /sys/class/gpio/gpio128/active_low - echo 1 > /sys/class/gpio/gpio129/active_low - echo 1 > /sys/class/gpio/gpio130/active_low - echo 1 > /sys/class/gpio/gpio131/active_low - echo 1 > /sys/class/gpio/gpio132/active_low - echo 1 > /sys/class/gpio/gpio133/active_low - echo 1 > /sys/class/gpio/gpio134/active_low - echo 1 > /sys/class/gpio/gpio135/active_low - echo 1 > /sys/class/gpio/gpio136/active_low - echo 1 > /sys/class/gpio/gpio137/active_low - echo 1 > /sys/class/gpio/gpio138/active_low - echo 1 > /sys/class/gpio/gpio139/active_low - echo 1 > /sys/class/gpio/gpio140/active_low - echo 1 > /sys/class/gpio/gpio141/active_low - echo 1 > /sys/class/gpio/gpio142/active_low - echo 1 > /sys/class/gpio/gpio143/active_low - echo 0 > /sys/class/gpio/gpio128/value - echo 0 > /sys/class/gpio/gpio129/value - echo 0 > /sys/class/gpio/gpio130/value - echo 0 > /sys/class/gpio/gpio131/value - echo 0 > /sys/class/gpio/gpio132/value - echo 0 > /sys/class/gpio/gpio133/value - echo 0 > /sys/class/gpio/gpio134/value - echo 0 > /sys/class/gpio/gpio135/value - echo 0 > /sys/class/gpio/gpio136/value - echo 0 > /sys/class/gpio/gpio137/value - echo 0 > /sys/class/gpio/gpio138/value - echo 0 > /sys/class/gpio/gpio139/value - echo 0 > /sys/class/gpio/gpio140/value - echo 0 > /sys/class/gpio/gpio141/value - echo 0 > /sys/class/gpio/gpio142/value - echo 0 > /sys/class/gpio/gpio143/value + for((i=${GPIO_OFFSET}+128;i<=${GPIO_OFFSET}+143;i++)); + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + echo low > /sys/class/gpio/gpio${i}/direction + #echo out > /sys/class/gpio/gpio${i}/direction + #echo 0 > /sys/class/gpio/gpio${i}/value + done + + #echo 128 > /sys/class/gpio/export + #echo 129 > /sys/class/gpio/export + #echo 130 > /sys/class/gpio/export + #echo 131 > /sys/class/gpio/export + #echo 132 > /sys/class/gpio/export + #echo 133 > /sys/class/gpio/export + #echo 134 > /sys/class/gpio/export + #echo 135 > /sys/class/gpio/export + #echo 136 > /sys/class/gpio/export + #echo 137 > /sys/class/gpio/export + #echo 138 > /sys/class/gpio/export + #echo 139 > /sys/class/gpio/export + #echo 140 > /sys/class/gpio/export + #echo 141 > /sys/class/gpio/export + #echo 142 > /sys/class/gpio/export + #echo 143 > /sys/class/gpio/export + #echo out > /sys/class/gpio/gpio128/direction + #echo out > /sys/class/gpio/gpio129/direction + #echo out > /sys/class/gpio/gpio130/direction + #echo out > /sys/class/gpio/gpio131/direction + #echo out > /sys/class/gpio/gpio132/direction + #echo out > /sys/class/gpio/gpio133/direction + #echo out > /sys/class/gpio/gpio134/direction + #echo out > /sys/class/gpio/gpio135/direction + #echo out > /sys/class/gpio/gpio136/direction + #echo out > /sys/class/gpio/gpio137/direction + #echo out > /sys/class/gpio/gpio138/direction + #echo out > /sys/class/gpio/gpio139/direction + #echo out > /sys/class/gpio/gpio140/direction + #echo out > /sys/class/gpio/gpio141/direction + #echo out > /sys/class/gpio/gpio142/direction + #echo out > /sys/class/gpio/gpio143/direction + #echo 1 > /sys/class/gpio/gpio128/active_low + #echo 1 > /sys/class/gpio/gpio129/active_low + #echo 1 > /sys/class/gpio/gpio130/active_low + #echo 1 > /sys/class/gpio/gpio131/active_low + #echo 1 > /sys/class/gpio/gpio132/active_low + #echo 1 > /sys/class/gpio/gpio133/active_low + #echo 1 > /sys/class/gpio/gpio134/active_low + #echo 1 > /sys/class/gpio/gpio135/active_low + #echo 1 > /sys/class/gpio/gpio136/active_low + #echo 1 > /sys/class/gpio/gpio137/active_low + #echo 1 > /sys/class/gpio/gpio138/active_low + #echo 1 > /sys/class/gpio/gpio139/active_low + #echo 1 > /sys/class/gpio/gpio140/active_low + #echo 1 > /sys/class/gpio/gpio141/active_low + #echo 1 > /sys/class/gpio/gpio142/active_low + #echo 1 > /sys/class/gpio/gpio143/active_low + #echo 0 > /sys/class/gpio/gpio128/value + #echo 0 > /sys/class/gpio/gpio129/value + #echo 0 > /sys/class/gpio/gpio130/value + #echo 0 > /sys/class/gpio/gpio131/value + #echo 0 > /sys/class/gpio/gpio132/value + #echo 0 > /sys/class/gpio/gpio133/value + #echo 0 > /sys/class/gpio/gpio134/value + #echo 0 > /sys/class/gpio/gpio135/value + #echo 0 > /sys/class/gpio/gpio136/value + #echo 0 > /sys/class/gpio/gpio137/value + #echo 0 > /sys/class/gpio/gpio138/value + #echo 0 > /sys/class/gpio/gpio139/value + #echo 0 > /sys/class/gpio/gpio140/value + #echo 0 > /sys/class/gpio/gpio141/value + #echo 0 > /sys/class/gpio/gpio142/value + #echo 0 > /sys/class/gpio/gpio143/value } @@ -1008,41 +1086,48 @@ function _qsfp_port_i2c_var_set { regAddr=0x20 dataAddr=0 eeprombusbase=${NUM_MUX3_CHAN0_DEVICE} - gpioBase=240 + gpioBase=$((${GPIO_OFFSET}+240)) + #gpioBase=240 ;; 9|10|11|12|13|14|15|16) i2cbus=${NUM_MUX1_CHAN4_DEVICE} regAddr=0x20 dataAddr=1 eeprombusbase=${NUM_MUX4_CHAN0_DEVICE} - gpioBase=240 + gpioBase=$((${GPIO_OFFSET}+240)) + #gpioBase=240 ;; 17|18|19|20|21|22|23|24) i2cbus=${NUM_MUX1_CHAN4_DEVICE} regAddr=0x21 dataAddr=0 eeprombusbase=${NUM_MUX5_CHAN0_DEVICE} - gpioBase=$((224 - 16)) + gpioBase=$((${GPIO_OFFSET}+224-16)) + #gpioBase=$((224 - 16)) ;; 25|26|27|28|29|30|31|32) i2cbus=${NUM_MUX1_CHAN4_DEVICE} regAddr=0x21 dataAddr=1 eeprombusbase=${NUM_MUX6_CHAN0_DEVICE} - gpioBase=$((224 - 16)) - ;; - 33) - i2cbus=${NUM_MUX1_CHAN7_DEVICE} - regAddr=0x22 - dataAddr=0 - ;; - 34) - i2cbus=${NUM_MUX1_CHAN7_DEVICE} - regAddr=0x22 - dataAddr=1 + gpioBase=$((${GPIO_OFFSET}+224-16)) + #gpioBase=$((224 - 16)) ;; + #33) + # i2cbus=${NUM_MUX1_CHAN7_DEVICE} + # regAddr=0x22 + # dataAddr=0 + # gpioBase=${GPIO_OFFSET} + #;; + #34) + # i2cbus=${NUM_MUX1_CHAN7_DEVICE} + # regAddr=0x22 + # dataAddr=1 + # gpioBase=${GPIO_OFFSET} + #;; *) echo "Please input 1~32" + exit ;; esac } @@ -1428,6 +1513,7 @@ function _main { tart_time_str=`date` start_time_sec=$(date +%s) + _set_gpio_offset if [ "${EXEC_FUNC}" == "help" ]; then _help elif [ "${EXEC_FUNC}" == "i2c_init" ]; then @@ -1505,14 +1591,17 @@ function _main { exit ${FALSE} fi - end_time_str=`date` - end_time_sec=$(date +%s) - diff_time=$[ ${end_time_sec} - ${start_time_sec} ] - echo "Start Time: ${start_time_str} (${start_time_sec})" - echo "End Time : ${end_time_str} (${end_time_sec})" - echo "Total Execution Time: ${diff_time} sec" + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" - echo "done!!!" + echo "done!!!" + fi } _main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/i2c_utils.sh index d0ca56f4d1b0..dcb6b9167982 100644 --- a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/i2c_utils.sh +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/i2c_utils.sh @@ -15,6 +15,9 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . +# trun on for more debug output +#DEBUG="on" + VERSION="1.0.0" TRUE=200 FALSE=404 @@ -602,6 +605,35 @@ function _i2c_io_exp_init { i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} 0x00 i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} $((2#00011111)) + #PCA9555 on BMC Dummy Board + #set SYSTEM_LED_RST_L before init PCA9539 LED BOARD IO Expander + echo "Init PCA9555 MUX RST IO Expander" + #PCA9555 MUX RST Expander + #0.0 FRU_I2C_MUX_RST_L OUT 1 + #0.1 MAIN_I2C_MUX_RST_L OUT 1 + #0.2 SYSTEM_LED_RST_L OUT 1 + #0.3 BMC_TO_UCD_RST_L OUT 1 + #0.4 BMC_TO_HOST_RST_L OUT 1 + #0.5 ETHX_RST_L OUT 1 + #0.6 GPIOF4 IN + #0.7 N/A + #1.0 CPU_to_FRU_I2C_EN OUT 1 + #1.1 CPU_to_MAIN_I2C_EN OUT 1 + #1.2 P3V3_FAN_EN OUT 1 + #1.3 P3V3_I2C_EN OUT 1 + #1.4 UCD9090_CNTRL OUT 1 + #1.5 UART_MUX_SEL OUT 0 + #1.6 USB_MUX_SEL OUT 0 + #1.7 ETHX_CPU_EEPROM_SEL OUT 0 + i2c_bus=${I2C_BUS_MUX_RST} + i2c_addr=${I2C_ADDR_MUX_RST} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_0} $((2#00111111)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_1} $((2#00011111)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} $((2#01000000)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} 0x00 + echo "Init PCA9539 LED BOARD IO Expander" #PCA9539 LED BOARD #0.0 SYS_LED_G OUT 1 @@ -721,34 +753,6 @@ function _i2c_io_exp_init { i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} $((2#11011011)) i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} $((2#11100011)) - #PCA9555 on BMC Dummy Board - echo "Init PCA9555 MUX RST IO Expander" - #PCA9555 MUX RST Expander - #0.0 FRU_I2C_MUX_RST_L OUT 1 - #0.1 MAIN_I2C_MUX_RST_L OUT 1 - #0.2 SYSTEM_LED_RST_L OUT 1 - #0.3 BMC_TO_UCD_RST_L OUT 1 - #0.4 BMC_TO_HOST_RST_L OUT 1 - #0.5 ETHX_RST_L OUT 1 - #0.6 GPIOF4 IN - #0.7 N/A - #1.0 CPU_to_FRU_I2C_EN OUT 1 - #1.1 CPU_to_MAIN_I2C_EN OUT 1 - #1.2 P3V3_FAN_EN OUT 1 - #1.3 P3V3_I2C_EN OUT 1 - #1.4 UCD9090_CNTRL OUT 1 - #1.5 UART_MUX_SEL OUT 0 - #1.6 USB_MUX_SEL OUT 0 - #1.7 ETHX_CPU_EEPROM_SEL OUT 0 - i2c_bus=${I2C_BUS_MUX_RST} - i2c_addr=${I2C_ADDR_MUX_RST} - i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_0} $((2#00111111)) - i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_1} $((2#00011111)) - i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 - i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 - i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} $((2#01000000)) - i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} 0x00 - #PCA9539 on CPU Board echo "Init PCA9539 CPLD IO Expander on CPU" i2c_bus=${I2C_BUS_MUX_CPU_CPLD} @@ -1021,27 +1025,27 @@ function _i2c_led_test { _i2c_fan_led _pause 'Check [FAN LED] = Amber and Press [Enter] key to continue...' - #PSU2 led (green) + #PSU1 led (green) _i2c_reset_led COLOR_LED="green" - _i2c_psu2_led - _pause 'Check [PSU2 LED] = Green and Press [Enter] key to continue...' - #PSU2 led (amber) + _i2c_psu1_led + _pause 'Check [PSU1 LED] = Green and Press [Enter] key to continue...' + #PSU1 led (amber) _i2c_reset_led COLOR_LED="amber" - _i2c_psu2_led - _pause 'Check [PSU2 LED] = Amber and Press [Enter] key to continue...' + _i2c_psu1_led + _pause 'Check [PSU1 LED] = Amber and Press [Enter] key to continue...' - #PSU1 led (green) + #PSU2 led (green) _i2c_reset_led COLOR_LED="green" - _i2c_psu1_led - _pause 'Check [PSU1 LED] = Green and Press [Enter] key to continue...' + _i2c_psu2_led + _pause 'Check [PSU2 LED] = Green and Press [Enter] key to continue...' #PSU2 led (amber) _i2c_reset_led COLOR_LED="amber" - _i2c_psu1_led - _pause 'Check [PSU1 LED] = Amber and Press [Enter] key to continue...' + _i2c_psu2_led + _pause 'Check [PSU2 LED] = Amber and Press [Enter] key to continue...' #Turn OFF All LED _i2c_reset_led @@ -1090,6 +1094,7 @@ function _qsfp_port_i2c_var_set { ;; *) echo "Please input 1~${PORT_NUM}" + exit ;; esac @@ -1930,13 +1935,17 @@ function _main { exit ${FALSE} fi - end_time_str=`date` - end_time_sec=$(date +%s) - diff_time=$[ ${end_time_sec} - ${start_time_sec} ] - echo "------------------------------" - echo "Total Execution Time: ${diff_time} sec" + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" - echo "DONE" + echo "done!!!" + fi } _main diff --git a/platform/nephos/sonic-platform-modules-ingrasys/.gitignore b/platform/nephos/sonic-platform-modules-ingrasys/.gitignore new file mode 100644 index 000000000000..c6127b38c1aa --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/.gitignore @@ -0,0 +1,52 @@ +# Prerequisites +*.d + +# Object files +*.o +*.ko +*.obj +*.elf + +# Linker output +*.ilk +*.map +*.exp + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su +*.idb +*.pdb + +# Kernel Module Compile Results +*.mod* +*.cmd +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf diff --git a/platform/nephos/sonic-platform-modules-ingrasys/LICENSE b/platform/nephos/sonic-platform-modules-ingrasys/LICENSE new file mode 100644 index 000000000000..9cecc1d4669e --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/LICENSE @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + {one line to give the program's name and a brief idea of what it does.} + Copyright (C) {year} {name of author} + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + {project} Copyright (C) {year} {fullname} + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/platform/nephos/sonic-platform-modules-ingrasys/debian/changelog b/platform/nephos/sonic-platform-modules-ingrasys/debian/changelog new file mode 100644 index 000000000000..a3e3f92cc731 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/debian/changelog @@ -0,0 +1,11 @@ +platform-driver (1.0.0) unstable; urgency=low + + * Add support for S9130-32X, S9230-64X series + + -- developer Wed, 29 Mar 2017 11:00:00 +0800 + +platform-driver (1.0.0) unstable; urgency=low + + * Initial release (Closes: #nnnn) + + -- developer Wed, 05 Oct 2016 16:30:45 +0800 diff --git a/platform/nephos/sonic-platform-modules-ingrasys/debian/compat b/platform/nephos/sonic-platform-modules-ingrasys/debian/compat new file mode 100644 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/nephos/sonic-platform-modules-ingrasys/debian/control b/platform/nephos/sonic-platform-modules-ingrasys/debian/control new file mode 100755 index 000000000000..3db0b5f3505f --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/debian/control @@ -0,0 +1,15 @@ +Source: platform-driver +Section: unknown +Priority: optional +Maintainer: Wade He +Build-Depends: debhelper (>= 9), dh-systemd +Standards-Version: 1.0.0 + +Package: sonic-platform-ingrasys-s9130-32x +Architecture: amd64 +Description: This package contains S9130-32X platform driver utility for SONiC project. + +Package: sonic-platform-ingrasys-s9230-64x +Architecture: amd64 +Description: This package contains S9230-64X platform driver utility for SONiC project. + diff --git a/platform/nephos/sonic-platform-modules-ingrasys/debian/rules b/platform/nephos/sonic-platform-modules-ingrasys/debian/rules new file mode 100755 index 000000000000..f03e1de42c1d --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/debian/rules @@ -0,0 +1,42 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +PACKAGE_PRE_NAME := sonic-platform-ingrasys +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= s9130-32x s9230-64x +MODULE_DIR := modules +UTILS_DIR := utils +SERVICE_DIR := service +CONF_DIR := conf + +%: + dh $@ --with systemd + +override_dh_auto_build: + (for mod in $(MODULE_DIRS); do \ + make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + done) + +override_dh_auto_install: + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} \ + $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} usr/sbin; \ + cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/*.sh \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/sbin; \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} lib/systemd/system; \ + cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system; \ + done) + +override_dh_clean: + dh_clean + (for mod in $(MODULE_DIRS); do \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \ + done) + diff --git a/platform/nephos/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9130-32x.init b/platform/nephos/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9130-32x.init new file mode 100644 index 000000000000..a925faf45fa8 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9130-32x.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S9130-32X board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils.sh i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s9130-32x.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/nephos/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9230-64x.init b/platform/nephos/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9230-64x.init new file mode 100644 index 000000000000..4389aee5f77c --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9230-64x.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S9230-64X board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s9230-64x.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/README.md b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/README.md new file mode 100644 index 000000000000..1b3b14db343b --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/README.md @@ -0,0 +1,167 @@ +# Ingrasys S9130-32X Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S9130-32X is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S9130-32X platform. + +### I2C i801 + +The I2C i801 on Ingrasys S9130-32X can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for power monitor, FAN controller, HWM and thermal sensors. + +### I2C PCA9548 +The PCA9548 module on S9130-32X can be found in +`/sys/bus/i2c/devices/i2c-1/` , `/sys/bus/i2c/devices/i2c-2/`, +`/sys/bus/i2c/devices/i2c-3/`, `/sys/bus/i2c/devices/i2c-4/`, +`/sys/bus/i2c/devices/i2c-5/`, `/sys/bus/i2c/devices/i2c-6/`, +`/sys/bus/i2c/devices/i2c-7/`, `/sys/bus/i2c/devices/i2c-8/` + +The pca9548 module for zQSFP module get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S9130-32X. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S9130-32X platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s9130-32x package is installed on the S9130-32X, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x51" > /sys/bus/i2c/devices/i2c-0/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/0-0051/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber on|off + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber on|off + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber on|off + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon5/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm1` setting fan1 to fan4, +`pwm2` setting fan5 to fan8. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + hexdump -C psu0.rom + hexdump -C psu1.rom + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the pca9548 kernel driver. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/Makefile b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/Makefile new file mode 100755 index 000000000000..688bb4666444 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := eeprom_mb.o +obj-m += ingrasys_s9130_32x_psu.o diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/eeprom_mb.c b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/eeprom_mb.c new file mode 100755 index 000000000000..528864d93382 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/eeprom_mb.c @@ -0,0 +1,267 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* enable dev_dbg print out */ +//#define DEBUG + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { /*0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57,*/ I2C_CLIENT_END }; + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 512 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, (u8)((addr >> 8) & 0xFF), (u8)(addr & 0xFF)); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static ssize_t mb_eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + int ret; + int i; + u8 cmd; + u16 value16; + + dev_dbg(&client->dev, "mb_eeprom_write off=%d, count=%d\n", (int)off, (int)count); + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + mutex_lock(&data->update_lock); + + for(i=0; i < count; i++) { + /* write command */ + cmd = (off >> 8) & 0xff; + value16 = off & 0xff; + value16 |= buf[i] << 8; + ret = i2c_smbus_write_word_data(client, cmd, value16); + + if (ret < 0) { + dev_err(&client->dev, "write address failed at %d \n", (int)off); + goto exit; + } + + off++; + + /* need to wait for write complete */ + udelay(10000); + } +exit: + mutex_unlock(&data->update_lock); + /* force to update client when reading */ + for(i=0; i < SLICE_NUM; i++) { + data->last_updated[i] = 0; + } + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO | S_IWUSR, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, + .write = mb_eeprom_write, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x51 and 0x55. So decline + attaching to addresses >= 0x56 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x56) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys Mother Borad EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/ingrasys_s9130_32x_platform.h b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/ingrasys_s9130_32x_platform.h new file mode 100644 index 000000000000..23dcf17a855b --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/ingrasys_s9130_32x_platform.h @@ -0,0 +1,148 @@ +#ifndef _S9130_32X_PLATFORM_H +#define _S9130_32X_PLATFORM_H + +#include + +// remove debug before release +#define DEBUG + +enum bus_order { + I2C_BUS_MAIN, + MUX_9548_0_CH0, + MUX_9548_0_CH1, + MUX_9548_0_CH2, + MUX_9548_0_CH3, + MUX_9548_0_CH4, + MUX_9548_0_CH5, + MUX_9548_0_CH6, + MUX_9548_0_CH7, + MUX_9548_1_CH0, + MUX_9548_1_CH1, + MUX_9548_1_CH2, + MUX_9548_1_CH3, + MUX_9548_1_CH4, + MUX_9548_1_CH5, + MUX_9548_1_CH6, + MUX_9548_1_CH7, + MUX_9546_0_CH0, + MUX_9546_0_CH1, + MUX_9546_0_CH2, + MUX_9546_0_CH3, + MUX_9546_1_CH0, + MUX_9546_1_CH1, + MUX_9546_1_CH2, + MUX_9546_1_CH3, + MUX_9548_2_CH0, + MUX_9548_2_CH1, + MUX_9548_2_CH2, + MUX_9548_2_CH3, + MUX_9548_2_CH4, + MUX_9548_2_CH5, + MUX_9548_2_CH6, + MUX_9548_2_CH7, + MUX_9548_3_CH0, + MUX_9548_3_CH1, + MUX_9548_3_CH2, + MUX_9548_3_CH3, + MUX_9548_3_CH4, + MUX_9548_3_CH5, + MUX_9548_3_CH6, + MUX_9548_3_CH7, + MUX_9548_4_CH0, + MUX_9548_4_CH1, + MUX_9548_4_CH2, + MUX_9548_4_CH3, + MUX_9548_4_CH4, + MUX_9548_4_CH5, + MUX_9548_4_CH6, + MUX_9548_4_CH7, + MUX_9548_5_CH0, + MUX_9548_5_CH1, + MUX_9548_5_CH2, + MUX_9548_5_CH3, + MUX_9548_5_CH4, + MUX_9548_5_CH5, + MUX_9548_5_CH6, + MUX_9548_5_CH7, + MUX_9548_6_CH0, + MUX_9548_6_CH1, + MUX_9548_6_CH2, + MUX_9548_6_CH3, + MUX_9548_6_CH4, + MUX_9548_6_CH5, + MUX_9548_6_CH6, + MUX_9548_6_CH7, + MUX_9548_7_CH0, + MUX_9548_7_CH1, + MUX_9548_7_CH2, + MUX_9548_7_CH3, + MUX_9548_7_CH4, + MUX_9548_7_CH5, + MUX_9548_7_CH6, + MUX_9548_7_CH7, + MUX_9548_8_CH0, + MUX_9548_8_CH1, + MUX_9548_8_CH2, + MUX_9548_8_CH3, + MUX_9548_8_CH4, + MUX_9548_8_CH5, + MUX_9548_8_CH6, + MUX_9548_8_CH7, + MUX_9548_9_CH0, + MUX_9548_9_CH1, + MUX_9548_9_CH2, + MUX_9548_9_CH3, + MUX_9548_9_CH4, + MUX_9548_9_CH5, + MUX_9548_9_CH6, + MUX_9548_9_CH7, + MUX_9548_10_CH0, + MUX_9548_10_CH1, + MUX_9548_10_CH2, + MUX_9548_10_CH3, + MUX_9548_10_CH4, + MUX_9548_10_CH5, + MUX_9548_10_CH6, + MUX_9548_10_CH7, +}; + +#define I2C_ADDR_MUX_9555_0 (0x20) +#define I2C_ADDR_MUX_9555_1 (0x24) +#define I2C_ADDR_MUX_9555_2 (0x25) +#define I2C_ADDR_MUX_9555_3 (0x26) +#define I2C_ADDR_MUX_9539_0 (0x76) +#define I2C_ADDR_MUX_9539_1 (0x76) +#define I2C_BUS_FAN_STATUS (I2C_BUS_MAIN) +#define I2C_BUS_SYS_LED (MUX_9548_1_CH1) + +#define NUM_OF_I2C_MUX (11) +#define NUM_OF_CPLD (5) +#define NUM_OF_QSFP_PORT (64) +#define NUM_OF_SFP_PORT (2) +#define QSFP_EEPROM_I2C_ADDR (0x50) + +enum gpio_reg { + REG_PORT0_IN, + REG_PORT1_IN, + REG_PORT0_OUT, + REG_PORT1_OUT, + REG_PORT0_POL, + REG_PORT1_POL, + REG_PORT0_DIR, + REG_PORT1_DIR, +}; + +struct ing_i2c_board_info { + int ch; + int size; + struct i2c_board_info *board_info; +}; + +struct i2c_init_data { + __u16 ch; + __u16 addr; + __u8 reg; + __u8 value; +}; + +#endif diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/ingrasys_s9130_32x_psu.c b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/ingrasys_s9130_32x_psu.c new file mode 100644 index 000000000000..edf92b67241b --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/modules/ingrasys_s9130_32x_psu.c @@ -0,0 +1,388 @@ +/* + * S9130-32x PSU driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ingrasys_s9130_32x_platform.h" + +static ssize_t show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf); +static struct s9130_psu_data *s9130_psu_update_status(struct device *dev); +static struct s9130_psu_data *s9130_psu_update_eeprom(struct device *dev); +static int s9130_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len); + + +#define DRIVER_NAME "psu" + +// Addresses scanned +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; + +/* PSU EEPROM SIZE */ +#define EEPROM_SZ 256 +#define READ_EEPROM 1 +#define NREAD_EEPROM 0 + +static struct i2c_client pca9555_client; + +/* pca9555 gpio pin mapping */ +#define PSU2_PWROK 0 +#define PSU2_PRSNT_L 1 +#define PSU2_PWRON_L 2 +#define PSU1_PWROK 3 +#define PSU1_PRSNT_L 4 +#define PSU1_PWRON_L 5 +#define TMP_75_INT_L 6 + +/* Driver Private Data */ +struct s9130_psu_data { + struct mutex lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + s32 status; /* IO expander value */ + char eeprom[EEPROM_SZ]; /* psu eeprom data */ + char psuABS; /* PSU absent */ + char psuPG; /* PSU power good */ +}; + +enum psu_index +{ + s9130_psu1, + s9130_psu2 +}; + +/* + * display power good attribute + */ +static ssize_t +show_psu_pg(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s9130_psu_data *data = s9130_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuPG; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + +/* + * display power absent attribute + */ +static ssize_t +show_psu_abs(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s9130_psu_data *data = s9130_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuABS; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + + +/* + * sysfs attributes for psu + */ +static DEVICE_ATTR(psu_pg, S_IRUGO, show_psu_pg, NULL); +static DEVICE_ATTR(psu_abs, S_IRUGO, show_psu_abs, NULL); +static DEVICE_ATTR(psu_eeprom, S_IRUGO, show_psu_eeprom, NULL); + +static struct attribute *s9130_psu_attributes[] = { + &dev_attr_psu_pg.attr, + &dev_attr_psu_abs.attr, + &dev_attr_psu_eeprom.attr, + NULL +}; + +/* + * display psu eeprom content + */ +static ssize_t +show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct s9130_psu_data *data = s9130_psu_update_eeprom(dev); + + memcpy(buf, (char *)data->eeprom, EEPROM_SZ); + return EEPROM_SZ; +} + +static const struct attribute_group s9130_psu_group = { + .attrs = s9130_psu_attributes, +}; + +/* + * check gpio expander is accessible + */ +static int +pca9555_detect(struct i2c_client *client) +{ + if (i2c_smbus_read_byte_data(client, REG_PORT0_DIR) < 0) { + return -ENODEV; + } + + return 0; +} + +/* + * client address init + */ +static void +i2c_devices_client_address_init(struct i2c_client *client) +{ + pca9555_client = *client; + pca9555_client.addr = 0x25; +} + +static int +s9130_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct s9130_psu_data *data; + int status, err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct s9130_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct s9130_psu_data)); + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->lock); + + i2c_devices_client_address_init(client); + + err = pca9555_detect(&pca9555_client); + if (err) { + return err; + } + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &s9130_psu_group); + if (status) { + goto exit_free; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &s9130_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int +s9130_psu_remove(struct i2c_client *client) +{ + struct s9130_psu_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &s9130_psu_group); + kfree(data); + + return 0; +} + + +/* + * psu eeprom read utility + */ +static int +s9130_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len) +{ + int i=0, ret=0; + int blk_max = 32; //max block read size + + /* read eeprom, 32 * 8 = 256 bytes */ + for (i=0; i < EEPROM_SZ/blk_max; i++) { + ret = i2c_smbus_read_i2c_block_data(client, (i*blk_max), blk_max, + data + (i*blk_max)); + if (ret < 0) { + return ret; + } + } + return ret; +} + +/* + * update eeprom content + */ +static struct s9130_psu_data +*s9130_psu_update_eeprom(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s9130_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + if (time_after(jiffies, data->last_updated + 300 * HZ) + || !data->valid) { + + /* Read psu status */ + + status = i2c_smbus_read_word_data(&(pca9555_client), REG_PORT0_IN); + data->status = status; + + /*read psu status from io expander*/ + + if (data->index == s9130_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (status >> psu_pwrok) & 0x1; + data->psuABS = (status >> psu_prsnt_l) & 0x1; + + /* Read eeprom */ + if (!data->psuABS) { + //clear local eeprom data + memset(data->eeprom, 0, EEPROM_SZ); + + //read eeprom + status = s9130_psu_read_block(client, 0, data->eeprom, + ARRAY_SIZE(data->eeprom)); + + if (status < 0) { + memset(data->eeprom, 0, EEPROM_SZ); + dev_err(&client->dev, "Read eeprom failed, status=(%d)\n", status); + } else { + data->valid = 1; + } + } else { + memset(data->eeprom, 0, EEPROM_SZ); + } + data->last_updated = jiffies; + } + + mutex_unlock(&data->lock); + + return data; +} + +/* + * update psu status + */ +static struct s9130_psu_data +*s9130_psu_update_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s9130_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + /* Read psu status */ + + status = i2c_smbus_read_word_data(&(pca9555_client), REG_PORT0_IN); + data->status = status; + + /*read psu status from io expander*/ + + if (data->index == s9130_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (status >> psu_pwrok) & 0x1; + data->psuABS = (status >> psu_prsnt_l) & 0x1; + + mutex_unlock(&data->lock); + + return data; +} + +static const struct i2c_device_id s9130_psu_id[] = { + { "psu1", s9130_psu1 }, + { "psu2", s9130_psu2 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, s9130_psu_id); + +static struct i2c_driver s9130_psu_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = s9130_psu_probe, + .remove = s9130_psu_remove, + .id_table = s9130_psu_id, + .address_list = normal_i2c, +}; + +static int __init s9130_psu_init(void) +{ + return i2c_add_driver(&s9130_psu_driver); +} + +static void __exit s9130_psu_exit(void) +{ + i2c_del_driver(&s9130_psu_driver); +} + +module_init(s9130_psu_init); +module_exit(s9130_psu_exit); + +MODULE_AUTHOR("Jason Tsai "); +MODULE_DESCRIPTION("S9130-32X psu driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/service/qsfp-monitor.service b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/service/qsfp-monitor.service new file mode 100644 index 000000000000..10b48f648b98 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s9130-32x-monitor.service +After=s9130-32x-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/service/s9130-32x-monitor.service b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/service/s9130-32x-monitor.service new file mode 100644 index 000000000000..3163b0af6f12 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/service/s9130-32x-monitor.service @@ -0,0 +1,19 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +Wants=qsfp-monitor.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s9130_32x_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/i2c_utils.sh b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/i2c_utils.sh new file mode 100755 index 000000000000..f9178c862bc1 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/i2c_utils.sh @@ -0,0 +1,1732 @@ +#!/bin/bash + +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# trun on for more debug output +#DEBUG="on" + +VERSION="1.1.0" +TRUE=200 +FALSE=404 + +EXEC_FUNC=${1} +COLOR_LED=${2} +QSFP_PORT=${2} +QSFP_ACTION=${2} +MB_EEPROM_ACTION=${2} +ONOFF_LED=${3} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +NUM_I801_DEVICE=0 + +# MAIN MUX PCA9548#0 0x73 +NUM_MUX_9548_0_CH0=$(( ${NUM_I801_DEVICE} + 1 )) # ucd9090 0x34 +NUM_MUX_9548_0_CH1=$(( ${NUM_I801_DEVICE} + 2 )) # PCA9539 0x76 for fp LED & HW ID +NUM_MUX_9548_0_CH7=$(( ${NUM_I801_DEVICE} + 8 )) # W83795 0x2F + +# FRU MUX PCA9545#1 0x72 +NUM_MUX_9545_1_CH0=$(( ${NUM_I801_DEVICE} + 9 )) # PSU2 0x50 +NUM_MUX_9545_1_CH1=$(( ${NUM_I801_DEVICE} + 10 )) # PSU1 0x50 +NUM_MUX_9545_1_CH2=$(( ${NUM_I801_DEVICE} + 11 )) # FAN board IO exander 0x20 +NUM_MUX_9545_1_CH3=$(( ${NUM_I801_DEVICE} + 12 )) # TMP75#0 0x4C TMP75#1 0x49 + +# HOST MUX PCA9548#2 0X70 +NUM_MUX_9548_2_CH0=$(( ${NUM_I801_DEVICE} + 13 )) # PCA9548#3 0x71 +NUM_MUX_9548_2_CH1=$(( ${NUM_I801_DEVICE} + 14 )) # PCA9548#4 0x71 +NUM_MUX_9548_2_CH2=$(( ${NUM_I801_DEVICE} + 15 )) # PCA9548#5 0x71 +NUM_MUX_9548_2_CH3=$(( ${NUM_I801_DEVICE} + 16 )) # PCA9548#6 0x71 +NUM_MUX_9548_2_CH4=$(( ${NUM_I801_DEVICE} + 17 )) # PCA9535#3~6 0x20~0x23 ZQSFP ABS/INT +NUM_MUX_9548_2_CH5=$(( ${NUM_I801_DEVICE} + 18 )) # PCA9535#7~10 0x20~0x23 ZQSFP LPMODE/RST +NUM_MUX_9548_3_CH0=$(( ${NUM_I801_DEVICE} + 21 )) # QSFP 0 EEPROM +NUM_MUX_9548_4_CH0=$(( ${NUM_I801_DEVICE} + 29 )) # QSFP 8 EEPROM +NUM_MUX_9548_5_CH0=$(( ${NUM_I801_DEVICE} + 37 )) # QSFP 16 EEPROM +NUM_MUX_9548_6_CH0=$(( ${NUM_I801_DEVICE} + 45 )) # QSFP 24 EEPROM + +# MUX Alias +I2C_BUS_MAIN=${NUM_I801_DEVICE} +I2C_BUS_HWM=${NUM_MUX_9548_0_CH7} +I2C_BUS_FAN_STATUS=${NUM_MUX_9545_1_CH2} +I2C_BUS_SYS_LED=${NUM_MUX_9548_0_CH1} +I2C_BUS_HW_ID=${NUM_MUX_9548_0_CH1} +I2C_BUS_BMC_HW_ID=${I2C_BUS_MAIN} +I2C_BUS_PSU_STAT=${I2C_BUS_MAIN} +I2C_BUS_FANTRAY_LED=${NUM_MUX_9545_1_CH2} +I2C_BUS_MB_EEPROM=${I2C_BUS_MAIN} +I2C_BUS_CB_EEPROM=${I2C_BUS_MAIN} +I2C_BUS_PSU1_EEPROM=${NUM_MUX_9545_1_CH1} +I2C_BUS_PSU2_EEPROM=${NUM_MUX_9545_1_CH0} + +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon5" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_MUX_9548_0_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH0}" +PATH_MUX_9548_0_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH1}" +PATH_MUX_9548_0_CH7="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH7}" +PATH_MUX_9545_1_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_1_CH0}" +PATH_MUX_9545_1_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_1_CH1}" +PATH_MUX_9545_1_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_1_CH2}" +PATH_MUX_9545_1_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_1_CH3}" +PATH_MUX_9548_2_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH0}" +PATH_MUX_9548_2_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH1}" +PATH_MUX_9548_2_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH2}" +PATH_MUX_9548_2_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH3}" +PATH_MUX_9548_2_CH4="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH4}" +PATH_MUX_9548_2_CH5="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH5}" +PATH_MUX_9548_3_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_3_CH0}" +PATH_MUX_9548_4_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_4_CH0}" +PATH_MUX_9548_5_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_5_CH0}" +PATH_MUX_9548_6_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_6_CH0}" + +# I2C Address +### I2C MUX +I2C_ADDR_MUX_9548_0=0x73 # MAIN MUX +I2C_ADDR_MUX_9545_1=0x72 # FRU MUX +I2C_ADDR_MUX_9548_2=0x70 # HOST MUX +I2C_ADDR_MUX_9548_3=0x71 # ZQSFP MUX #1 EEPROM +I2C_ADDR_MUX_9548_4=0x71 # ZQSFP MUX #2 EEPROM +I2C_ADDR_MUX_9548_5=0x71 # ZQSFP MUX #3 EEPROM +I2C_ADDR_MUX_9548_6=0x71 # ZQSFP MUX #4 EEPROM +### GPIO Expander +I2C_ADDR_MUX_9539_0=0x76 # LED & HW ID +I2C_ADDR_MUX_9539_1=0x75 # BMC PRSNT & HWM reset +I2C_ADDR_MUX_9539_2=0x74 # SYS SEL & RST +I2C_ADDR_MUX_9535_3=0x20 # ZQSFP0~15 ABS +I2C_ADDR_MUX_9535_4=0x21 # ZQSFP16~31 ABS +I2C_ADDR_MUX_9535_5=0x22 # ZQSFP0~15 INT +I2C_ADDR_MUX_9535_6=0x23 # ZQSFP16~31 INT +I2C_ADDR_MUX_9535_7=0x20 # ZQSFP0~15 LPMODE +I2C_ADDR_MUX_9535_8=0x21 # ZQSFP16~31 LPMODE +I2C_ADDR_MUX_9535_9=0x22 # ZQSFP0~15 RST +I2C_ADDR_MUX_9535_10=0x23 # ZQSFP16~31 RST +I2C_ADDR_MUX_9535_11=0x20 # on FAN board, fan status and led config +I2C_ADDR_MUX_9555_12=0x24 # on BMC board, INT and HW ID +I2C_ADDR_MUX_9555_13=0x25 # on BMC board, PSU status +I2C_ADDR_MUX_9555_14=0x26 # on BMC board, RST and SEL +I2C_ADDR_MUX_9539_15=0x77 # on CPU board, STATUS and ERR from CPLD +### peripheral +I2C_ADDR_MB_EEPROM=0x55 # on main board +I2C_ADDR_CB_EEPROM=0x51 # on cpu board +I2C_ADDR_UCD9090=0x34 +I2C_ADDR_W83795=0x2F +I2C_ADDR_PSU1_EEPROM=0x50 +I2C_ADDR_PSU2_EEPROM=0x50 +I2C_ADDR_TMP75_REAR=0x4C +I2C_ADDR_TMP75_FRONT=0x49 +I2C_ADDR_TMP75_CB=0x4F # on cpu board +I2C_ADDR_TMP75_BB=0x4A # on bmc board +I2C_ADDR_QSFP_EEPROM=0x50 + +#sysfs +PATH_SYSFS_PSU1="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU1_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU1_EEPROM)" +PATH_SYSFS_PSU2="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU2_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU2_EEPROM)" + +#ACTIVE LOW enable flag +ACTIVE_LOW_EN=1 +ACTIVE_HIGH_EN=0 +#GPIO Direction In/Out +DIR_IN=in +DIR_OUT=out + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +# IO expander register +# direction +REG_PORT0_DIR=6 +REG_PORT1_DIR=7 +# polarity +REG_PORT0_POL=4 +REG_PORT1_POL=5 +# output +REG_PORT0_OUT=2 +REG_PORT1_OUT=3 +# input +REG_PORT0_IN=0 +REG_PORT1_IN=1 + +#ZQSFP GPIO sysfs index +ZQSFP_PORT0_ABS_GPIO_IDX=240 # 240~255 +ZQSFP_PORT16_ABS_GPIO_IDX=224 # 224~239 + +# switch port number range +MIN_PORT_NUM=1 +MAX_PORT_NUM=32 + +#GPIO Offset +GPIO_OFFSET=0 + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "# Version : ${VERSION}" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_deinit" + echo " : ${0} i2c_fan_speed_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_gpio_init" + echo " : ${0} i2c_gpio_deinit" + echo " : ${0} i2c_led_test" + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_cb_eeprom_get" + echo " : ${0} i2c_eeprom_sync" + echo " : ${0} i2c_qsfp_eeprom_get [1-32]" + echo " : ${0} i2c_qsfp_eeprom_init new|delete" + echo " : ${0} i2c_mb_eeprom_init new|delete" + echo " : ${0} i2c_cb_eeprom_init new|delete" + echo " : ${0} i2c_qsfp_status_get [1-32]" + echo " : ${0} i2c_qsfp_type_get [1-32]" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_bmc_board_type_get" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_sys_led green|amber" + echo " : ${0} i2c_fan_led green|amber on|off" + echo " : ${0} i2c_psu1_led green|amber on|off" + echo " : ${0} i2c_psu2_led green|amber on|off" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + local i + for i in {1..5}; + do + eval "${*}" && break || echo "retry"; sleep 1; + done +} + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + #rmmod i2c_ismt + _util_rmmod i2c_i801 + modprobe i2c_i801 disable_features=0x10 + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + # add MUX PCA9548#0 on I801, assume to be i2c-1~8 + if [ ! -e ${PATH_MUX_9548_0_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_0}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_0} already init." + fi + # add MUX PCA9545#1 on I801, assume to be i2c-9~12 + if [ ! -e ${PATH_MUX_9545_1_CH0} ]; then + _retry "echo 'pca9545 ${I2C_ADDR_MUX_9545_1}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9545 ${I2C_ADDR_MUX_9545_1} already init." + fi + # add MUX PCA9548#2 on I801, assume to be i2c-13~20 + if [ ! -e ${PATH_MUX_9548_2_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_2}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_2} already init." + fi + # add MUX PCA9548#3 on PCA9548#2 CH0, assume to be i2c-21~28 + if [ ! -e ${PATH_MUX_9548_3_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_3}' > ${PATH_MUX_9548_2_CH0}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_3} already init." + fi + # add MUX PCA9548#4 on PCA9548#2 CH1, assume to be i2c-29~36 + if [ ! -e ${PATH_MUX_9548_4_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_4}' > ${PATH_MUX_9548_2_CH1}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_4} already init." + fi + # add MUX PCA9548#5 on PCA9548#2 CH2, assume to be i2c-37~44 + if [ ! -e ${PATH_MUX_9548_5_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_5}' > ${PATH_MUX_9548_2_CH2}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_5} already init." + fi + # add MUX PCA9548#6 on PCA9548#2 CH3, assume to be i2c-45~52 + if [ ! -e ${PATH_MUX_9548_6_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_6}' > ${PATH_MUX_9548_2_CH3}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_6} already init." + fi + + _i2c_hwm_init + _util_rmmod eeprom + modprobe eeprom_mb + modprobe gpio-pca953x + _i2c_io_exp_init + rmmod gpio_ich + _i2c_gpio_init + modprobe gpio_ich + _i2c_sensors_init + _i2c_psu_init + + # Init LED_CLR register (pull shift register out of reset), should be after io exp init + _port_led_clr_init + _i2c_qsfp_eeprom_init "new" + _i2c_mb_eeprom_init "new" + _i2c_cb_eeprom_init "new" + _i2c_fan_speed_init + _i2c_led_psu_status_set + _i2c_led_fan_status_set + + # sync eeprom content + _i2c_eeprom_sync + + # trun on sys led + echo "led_sys setup..." + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + + _config_rmem +} + +#I2C Deinit +function _i2c_deinit { + echo "i2c deinit..." + _i2c_gpio_deinit + for mod in coretemp jc42 w83795 eeprom eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_i801 ingrasys_s9130_32x_psu; + do + _util_rmmod $mod + done + echo "Done" +} + +function _i2c_sensors_init { + echo "SENSORS init..." + local dev_path + # to make sure hwmon index in sysfs as expected, + # need to remove kernel module and then probe them in expected order + # remove all sensors kernel module + _util_rmmod coretemp + _util_rmmod jc42 + _util_rmmod w83795 + # probe coretemp kernel module + modprobe coretemp + # probe hwmon kernel module + modprobe w83795 + # add tmp75 to sysfs + ####Main board thermal + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9545_1_CH3}-$(printf "%04x" ${I2C_ADDR_TMP75_REAR})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_REAR}" > ${PATH_MUX_9545_1_CH3}/new_device # hwmon1 + else + echo "${dev_path} already exist" + fi + sleep 0.5 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9545_1_CH3}-$(printf "%04x" ${I2C_ADDR_TMP75_FRONT})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_FRONT}" > ${PATH_MUX_9545_1_CH3}/new_device #hwmon2 + else + echo "${dev_path} already exist" + fi + sleep 0.5 + ####BMC board thermal + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH7}-$(printf "%04x" ${I2C_ADDR_TMP75_BB})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_BB}" > ${PATH_MUX_9548_0_CH7}/new_device #hwmon3 + else + echo "${dev_path} already exist" + fi + sleep 0.5 + ####CPU board thermal + dev_path="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MAIN}-$(printf "%04x" ${I2C_ADDR_TMP75_CB})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_CB}" > ${PATH_I801_DEVICE}/new_device #hwmon4 + else + echo "${dev_path} already exist" + fi + sleep 0.5 + # add w83795 to sysfs + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH7}-$(printf "%04x" ${I2C_ADDR_W83795})" + if ! [ -L ${dev_path} ]; then + echo "w83795adg ${I2C_ADDR_W83795}" > ${PATH_MUX_9548_0_CH7}/new_device #hwmon5 + else + echo "${dev_path} already exist" + fi + sleep 0.5 + + # probe jc42 kernel module + modprobe jc42 + + echo "Done" +} + +function _port_led_clr_init { + echo "port led init..." + # gpio pin on GPIO MUX PCA9539#2 I/O 0.2 + # pull high to out of reset + output_reg=${REG_PORT0_OUT} + mask=0x04 + value=0x04 + _util_i2cset -m ${mask} -y ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${output_reg} ${value} + echo "Done" +} + +#FAN Speed Init +function _i2c_fan_speed_init { + echo -n "FAN SPEED INIT..." + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + # init fan speed + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm1 + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + echo "SUCCESS" + else + echo "FAIL" + fi +} + +# HWM init +function _i2c_hwm_init { + echo "HWM INIT..." + # select bank0 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80 + # SW reset, Disable monitor + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x01 0x9C + # disable TR5/TR6 DTS + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x04 0x0 + # enable FANIN1~8 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x06 0xFF + # disable FANIN9~14 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x07 0x00 + # CLKIN clock frequency set as 48Mhz + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x01 0x1C + # select bank 2 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x82 + # set PWM mode in FOMC + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x0F 0x00 + # set 25KHz fan output frequency in F1OPFP&F2OPFP + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x18 0x84 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x19 0x84 +} + +#Temperature sensor Init +function _i2c_temp_init { + echo "TEMP INIT..." + # enable temp monitor on w83795 + # select bank0 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80 + # enable TR4 temperature monitoring + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x05 0x40 + # disable TR5/TR6 DTS + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x04 0x0 + echo "Done" +} + +#VOLMON Init +function _i2c_volmon_init { + echo "VOLMON INIT..." + # enable voltage monitor on w83795 + # VSEN1 P0V9 + # VSEN2 VDD + # VSEN3 P1V2 + # VSEN4 P1V8 + # select bank0 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80 + # enable vsen1~4, disable vsen5~8 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x02 0x0F + # enable 3VDD,VBAT + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x03 0x50 + echo "Done" +} + +#FANIN Init +function _i2c_fan_init { + echo "FANIN INIT..." + # enable fan monitor on w83795 + # 4 fantray with 8 FANIN + # select bank0 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80 + # enable FANIN1~8 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x06 0xFF + # disable FANIN9~14 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x07 0x00 + + # select bank 2 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x82 + # set PWM mode in FOMC + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x0F 0x00 + + echo "Done" +} + +#IO Expander Init +function _i2c_io_exp_init { + echo "=========================================================" + echo "# Description: I2C IO Expender Init" + echo "=========================================================" + + # need to init BMC io expander first due to some io expander are reset default + echo "Init BMC INT & HW ID IO Expander" + # all input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_12} ${REG_PORT0_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_12} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_12} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_12} ${REG_PORT1_POL} 0x00 + + echo "Init BMC PSU status IO Expander" + # PWRON default 0 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT0_OUT} 0x00 + # default 0 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT1_OUT} 0x00 + # I/O 0.2 0.5 output(PWRON), rest input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT0_DIR} 0xDB + # I/O 1.0~1.1 input, 1.2~1.4 output (1.5~1.7 not enable) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT1_DIR} 0xE3 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_13} ${REG_PORT1_POL} 0x00 + + echo "Init BMC RST and SEL IO Expander" + # RST default is 1 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT0_OUT} 0x3F + # SEL default is 0 (HOST), EN default is 1 (ACTIVE_HIGH) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT1_OUT} 0x1F + # I/O 0.0~0.5 output, 0.6~0.7 not use + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT0_DIR} 0xC0 + # all output + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT1_DIR} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_14} ${REG_PORT1_POL} 0x00 + + echo "Init System LED & HW ID IO Expander" + # I/O_0.x for System LED default 0, I/O_1.x for HW ID + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_OUT} 0x00 + # System LED => all output + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_DIR} 0x00 + # HW ID => all input + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT1_POL} 0x00 + + echo "Init System PRSNT and HWM RST IO Expander" + # HWM_RST_L default 1 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_OUT} 0x04 + # all input expect HWM_RST_L (0.2) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_DIR} 0xFB + # port1 not used + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_1} ${REG_PORT1_POL} 0x00 + + echo "Init System SEL and RST IO Expander" + # RST 0.0~0.3 default 1 (ACTIVE low), rest default 0 + # SEL set to value 0 (host) + # LED_CLR also do init in _port_led_clr_init + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_OUT} 0x0F + # RST 1.6~1.7 default 1 (ACTIVE low), INT 1.0~1.4 default 1 (ACTIVE low) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_OUT} 0xDF + # all output, but MAC_RST_L 0.0 need to set as input to prevent reboot issue + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_DIR} 0x09 + # RST 1.5 !~ 1.7 output, rest are input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_DIR} 0x1F + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_POL} 0x00 + + echo "Init FAN Board Status IO Expander" + # LED_G_L set to 0, LED_Y_L set to 1 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT0_OUT} 0x22 + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT1_OUT} 0x22 + # DIR/ABS is input, LED_Y/LED_G is output + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT0_DIR} 0xCC + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT1_DIR} 0xCC + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_11} ${REG_PORT1_POL} 0x00 + + echo "Init CPU CPLD IO Expander" + # all input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_15} ${REG_PORT0_DIR} 0xFF + # all input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_15} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_15} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_15} ${REG_PORT1_POL} 0x00 + + echo "Init ZQSFP IO Expender" + + echo "set ZQSFP ABS" + #zQSFP 0-15 ABS + # all input + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_3} ${REG_PORT0_DIR} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_3} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_3} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_3} ${REG_PORT1_POL} 0x00 + #zQSFP 16-31 ABS + # all input + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_4} ${REG_PORT0_DIR} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_4} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_4} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_4} ${REG_PORT1_POL} 0x00 + + echo "set ZQSFP INT" + #zQSFP 0-15 INT + # all input + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_5} ${REG_PORT0_DIR} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_5} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_5} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_5} ${REG_PORT1_POL} 0x00 + #zQSFP 16-31 INT + # all input + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_6} ${REG_PORT0_DIR} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_6} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_6} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH4} ${I2C_ADDR_MUX_9535_6} ${REG_PORT1_POL} 0x00 + + echo "set ZQSFP LP_MODE = 0" + #ZQSFP 0-15 LP_MODE + # default is 0 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT0_OUT} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT1_OUT} 0x00 + # all output + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT0_DIR} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT1_DIR} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_7} ${REG_PORT1_POL} 0x00 + #ZQSFP 16-31 LP_MODE + # default is 0 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT0_OUT} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT1_OUT} 0x00 + # all output + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT0_DIR} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT1_DIR} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_8} ${REG_PORT1_POL} 0x00 + + echo "set ZQSFP RST = 1" + #ZQSFP 0-15 RST + # default is 1 (ACTIVE_LOW) + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT0_OUT} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT1_OUT} 0xFF + # all output + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT0_DIR} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT1_DIR} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_9} ${REG_PORT1_POL} 0x00 + #ZQSFP 16-31 RST + # default is 1 (ACTIVE_LOW) + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT0_OUT} 0xFF + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT1_OUT} 0xFF + # all output + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT0_DIR} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT1_DIR} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_2_CH5} ${I2C_ADDR_MUX_9535_10} ${REG_PORT1_POL} 0x00 + +} + +# To set the global variable GPIO_OFFSET +function _set_gpio_offset { + GPIO_OFFSET=0 + for d in `ls /sys/class/gpio/ | grep gpiochip` + do + gpiochip_no=${d##gpiochip} + if [ $gpiochip_no -gt 255 ]; then + GPIO_OFFSET=256 + break + fi + done + #echo "set GPIO_OFFSET=${GPIO_OFFSET}" +} + +#GPIO Init +function _i2c_gpio_init { + local i=0 + local start=255 + local end=255 + local ch_num=16 + + #ABS Port 0-15 + echo "pca9535 ${I2C_ADDR_MUX_9535_3}" > ${PATH_MUX_9548_2_CH4}/new_device + _set_gpio_offset + start=$[ ${start}+${GPIO_OFFSET} ] + end=$[ ${end}+${GPIO_OFFSET} ] + start=$[ ${end}-${ch_num}+1] + for (( i=$start; i<=$end; i++ )) + do + _util_gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW_EN} + done + + #ABS Port 16-31 + end=$[ ${start}-1] + echo "pca9535 ${I2C_ADDR_MUX_9535_4}" > ${PATH_MUX_9548_2_CH4}/new_device + start=$[ ${end}-${ch_num}+1] + for (( i=$start; i<=$end; i++ )) + do + _util_gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW_EN} + done + + #INT Port 0-15 + end=$[ ${start}-1] + echo "pca9535 ${I2C_ADDR_MUX_9535_5}" > ${PATH_MUX_9548_2_CH4}/new_device + start=$[ ${end}-${ch_num}+1] + for (( i=$start; i<=$end; i++ )) + do + _util_gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW_EN} + done + + #INT Port 16-31 + end=$[ ${start}-1] + echo "pca9535 ${I2C_ADDR_MUX_9535_6}" > ${PATH_MUX_9548_2_CH4}/new_device + start=$[ ${end}-${ch_num}+1] + for (( i=$start; i<=$end; i++ )) + do + _util_gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW_EN} + done + + #LP Mode Port 0-15 + end=$[ ${start}-1] + echo "pca9535 ${I2C_ADDR_MUX_9535_7}" > ${PATH_MUX_9548_2_CH5}/new_device + start=$[ ${end}-${ch_num}+1] + for (( i=$start; i<=$end; i++ )) + do + _util_gpio_export ${i} ${DIR_OUT} ${ACTIVE_HIGH_EN} + done + + #LP Mode Port 16-31 + end=$[ ${start}-1] + echo "pca9535 ${I2C_ADDR_MUX_9535_8}" > ${PATH_MUX_9548_2_CH5}/new_device + start=$[ ${end}-${ch_num}+1] + for (( i=$start; i<=$end; i++ )) + do + _util_gpio_export ${i} ${DIR_OUT} ${ACTIVE_HIGH_EN} + done + + #RESET Port 0-15 + end=$[ ${start}-1] + echo "pca9535 ${I2C_ADDR_MUX_9535_9}" > ${PATH_MUX_9548_2_CH5}/new_device + start=$[ ${end}-${ch_num}+1] + for (( i=$start; i<=$end; i++ )) + do + # need to set value to low (became ACTIVE_HIGH) to take port out of reset + _util_gpio_export ${i} ${DIR_OUT} ${ACTIVE_LOW_EN} 0 + done + + #RESET Port 16-31 + end=$[ ${start}-1] + echo "pca9535 ${I2C_ADDR_MUX_9535_10}" > ${PATH_MUX_9548_2_CH5}/new_device + start=$[ ${end}-${ch_num}+1] + for (( i=$start; i<=$end; i++ )) + do + # need to set value to low (became ACTIVE_HIGH) to take port out of reset + _util_gpio_export ${i} ${DIR_OUT} ${ACTIVE_LOW_EN} 0 + done +} + +#GPIO DeInit +function _i2c_gpio_deinit { + echo ${I2C_ADDR_MUX_9535_3} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH4}/delete_device + echo ${I2C_ADDR_MUX_9535_4} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH4}/delete_device + echo ${I2C_ADDR_MUX_9535_5} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH4}/delete_device + echo ${I2C_ADDR_MUX_9535_6} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH4}/delete_device + echo ${I2C_ADDR_MUX_9535_7} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH5}/delete_device + echo ${I2C_ADDR_MUX_9535_8} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH5}/delete_device + echo ${I2C_ADDR_MUX_9535_9} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH5}/delete_device + echo ${I2C_ADDR_MUX_9535_10} > /sys/bus/i2c/devices/i2c-${NUM_MUX_9548_2_CH5}/delete_device +} + +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "FAN Tray Status Setup" + #FAN Status get + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + + # check if io expander for fan tray exist + result=`i2cget -y ${I2C_BUS_FANTRAY_LED} ${I2C_ADDR_MUX_9535_11} ${REG_PORT0_IN} 2>/dev/null` + err_code=$? + if [ "$err_code" != "0" ]; then + echo "fan tray not exist!" + return + fi + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then + FAN_TRAY=1 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=1 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then + FAN_TRAY=2 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=2 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then + FAN_TRAY=3 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=3 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + FAN_TRAY=4 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=4 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi +} + +#Set FAN LED +function _i2c_led_fan_status_set { + echo "FAN Status Setup" + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + echo "led_fan setup..." + # all fan ok + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + # all fan fail + elif [ "${FAN1_ALARM}" == "1" ] && [ "${FAN2_ALARM}" == "1" ] \ + && [ "${FAN3_ALARM}" == "1" ] && [ "${FAN4_ALARM}" == "1" ] \ + && [ "${FAN5_ALARM}" == "1" ] && [ "${FAN6_ALARM}" == "1" ] \ + && [ "${FAN7_ALARM}" == "1" ] && [ "${FAN8_ALARM}" == "1" ]; then + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + # partial fan fail + else + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + fi +} + +#Set Power Supply LED +function _i2c_led_psu_status_set { + echo "PSU LED Status Setup" + + #PSU Status set + _i2c_psu_status + + #PSU1 Status + echo "led_psu1 setup..." + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + else + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + + #PSU2 Status + echo "led_psu2 setup..." + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + else + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi +} + +#LED Test +function _i2c_led_test { + echo "=========================================================" + echo "# Description: I2C SYSTEM LED TEST..." + echo "=========================================================" + local output_reg=${REG_PORT0_OUT} + local mask=0xFF + local value=0xFF + + #sys led (green) + # set sys_led_g (0.7) = 1 + mask=0x80 + value=0x80 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check SYS LED green light and Press [Enter] key to continue...' + #sys led (amber) + # set sys_led_g (0.7) = 0 + mask=0x80 + value=0x00 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check SYS LED amber light and Press [Enter] key to continue...' + + #FAN led (green) + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 0 + mask=0x60 + value=0x40 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check FAN LED green light and Press [Enter] key to continue...' + #FAN led (amber) + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 1 + mask=0x60 + value=0x60 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check FAN LED amber light and Press [Enter] key to continue...' + + #PSU1 led (green) + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 0 + mask=0x18 + value=0x10 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check PSU1 LED green light and Press [Enter] key to continue...' + #PSU1 led (amber) + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 1 + mask=0x18 + value=0x18 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check PSU1 LED amber light and Press [Enter] key to continue...' + + #PSU2 led (green) + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 0 + mask=0x06 + value=0x04 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check PSU2 LED green light and Press [Enter] key to continue...' + #PSU2 led (amber) + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 1 + mask=0x06 + value=0x06 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check PSU2 LED amber light and Press [Enter] key to continue...' + + #Turn OFF All LED (can't trun off system led) + # set set fan_led_en (0.6), psu1_pwr_ok_oe (0.4), psu0_pwr_ok_oe (0.2) = 0 + mask=0x54 + value=0x00 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check turn off all LEDs (exclude SYS LED) and Press [Enter] key to continue...' + + # restore sys led + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + + echo "Done" +} + +#Set QSFP Port variable +function _qsfp_port_i2c_var_set { + local port=$1 + case ${port} in + 1|2|3|4|5|6|7|8) + i2cbus=${NUM_MUX_9548_2_CH4} + eeprombusbase=${NUM_MUX_9548_3_CH0} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT0_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT0_ABS_GPIO_IDX} + ;; + 9|10|11|12|13|14|15|16) + i2cbus=${NUM_MUX_9548_2_CH4} + eeprombusbase=${NUM_MUX_9548_4_CH0} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT0_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT0_ABS_GPIO_IDX} + ;; + 17|18|19|20|21|22|23|24) + i2cbus=${NUM_MUX_9548_2_CH4} + eeprombusbase=${NUM_MUX_9548_5_CH0} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT16_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT16_ABS_GPIO_IDX} + ;; + 25|26|27|28|29|30|31|32) + i2cbus=${NUM_MUX_9548_2_CH4} + eeprombusbase=${NUM_MUX_9548_6_CH0} + gpioBase=$((${GPIO_OFFSET}+${ZQSFP_PORT16_ABS_GPIO_IDX})) + #gpioBase=${ZQSFP_PORT16_ABS_GPIO_IDX} + ;; + *) + echo "Please input 1~32" + exit + ;; + esac +} + +#Set QSFP Port variable +function _qsfp_eeprom_var_set { + local port=$1 + # port 1 => zqsfp0 + # port 2 => zqsfp1 + # ... + eeprombusidx=$(( (${port} - 1) % 8)) + eeprombus=$(( ${eeprombusbase} + ${eeprombusidx} )) + eepromAddr=${I2C_ADDR_QSFP_EEPROM} +} + +#Get QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + + # input parameter validation + _util_input_check "${QSFP_PORT}" "${MIN_PORT_NUM}" "${MAX_PORT_NUM}" + + _util_get_qsfp_abs + + if [ $status = 0 ]; then + exit + fi + + _qsfp_eeprom_var_set ${QSFP_PORT} + + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init QSFP EEPROM +function _i2c_qsfp_eeprom_init { + echo "QSFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-32 ports EEPROM + local i + for i in {1..32}; + do + _qsfp_port_i2c_var_set ${i} + + _qsfp_eeprom_var_set ${i} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/delete_device + fi + done + echo "Done" +} + +#Init Main Board EEPROM +function _i2c_mb_eeprom_init { + echo -n "Main Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init mb EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then + echo "mb_eeprom ${I2C_ADDR_MB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then + echo "$I2C_ADDR_MB_EEPROM" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/delete_device + fi + echo "Done" +} + +#Init CPU Board EEPROM +function _i2c_cb_eeprom_init { + echo -n "CPU Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init cpu EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM) ]; then + echo "mb_eeprom ${I2C_ADDR_CB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CB_EEPROM}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM) ]; then + echo "$I2C_ADDR_CB_EEPROM" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CB_EEPROM}/delete_device + fi + echo "Done" +} + + +#get QSFP Status +function _i2c_qsfp_status_get { + + # input parameter validation + _util_input_check "${QSFP_PORT}" "${MIN_PORT_NUM}" "${MAX_PORT_NUM}" + + local stat + _util_get_qsfp_abs + echo "status=$status" +} + +#get QSFP Type +function _i2c_qsfp_type_get { + + # input parameter validation + _util_input_check "${QSFP_PORT}" "${MIN_PORT_NUM}" "${MAX_PORT_NUM}" + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + _qsfp_eeprom_var_set ${QSFP_PORT} + + #Get QSFP EEPROM info + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +#Init PSU Kernel Module +function _i2c_psu_init { + echo "=========================================================" + echo "# Description: I2C PSU Init" + echo "=========================================================" + modprobe ingrasys_s9130_32x_psu + + echo "psu1 ${I2C_ADDR_PSU1_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM}/new_device + echo "psu2 ${I2C_ADDR_PSU2_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM}/new_device +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + local eeprom_psu1="" + local eeprom_psu2="" + + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + eeprom_psu1="${PATH_SYSFS_PSU1}/psu_eeprom" + cat ${eeprom_psu1} | hexdump -C + + eeprom_psu2="${PATH_SYSFS_PSU2}/psu_eeprom" + cat ${eeprom_psu2} | hexdump -C +} + +#Get Main Board EEPROM Information +function _i2c_mb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + _i2c_sys_eeprom_get mb +} + +#Get CPU Board EEPROM Information +function _i2c_cb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C CB EEPROM Get..." + echo "=========================================================" + _i2c_sys_eeprom_get cb +} + +#Get system EEPROM Information +##input: "cb" for cpu board, "mb" for main board +function _i2c_sys_eeprom_get { + local eeprom_dev + + if [ "$1" == "cb" ]; then + eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM)/eeprom" + elif [ "$1" == "mb" ]; then + eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom" + else + echo "wrong eeprom type" + return + fi + + # check if eeprom device exist in sysfs + if [ ! -f ${eeprom_dev} ]; then + echo "eeprom device not init" + return + fi + + cat ${eeprom_dev} | hexdump -C + echo "Done" +} + +#sync eeprom content between mb and cb eeprom +function _i2c_eeprom_sync { + echo "=========================================================" + echo "# Description: EEPROM sync..." + echo "=========================================================" + + local mb_eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom" + local cb_eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM)/eeprom" + + # check if eeprom device exist in sysfs + if [[ ! -f ${mb_eeprom_dev} || ! -f ${cb_eeprom_dev} ]]; then + echo "eeprom device not init" + return + fi + + ## check if MB eeprom is empty + if [ ! -z "$(cat ${mb_eeprom_dev} | hexdump -n2 | grep ffff)" ]; then + echo "copy cb eeprom to mb eeprom..." + cat ${cb_eeprom_dev} > ${mb_eeprom_dev} + else + echo "no need to sync" + fi + + echo "Done" +} + +#Set System Status LED +function _i2c_sys_led { + # only green/amber, on/off can't control + if [ "${COLOR_LED}" == "green" ]; then + # set sys_led_g (0.7) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x80 + value=0x80 + elif [ "${COLOR_LED}" == "amber" ]; then + # set sys_led_g (0.7) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x80 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set FAN LED +function _i2c_fan_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x40 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + # set fan_led_en (0.6) = 0 & fan_led_y (0.5) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x60 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + # set fan_led_en (0.6) = 0 & fan_led_y (0.5) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x20 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set PSU1 LED +function _i2c_psu1_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x10 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + # set psu1_pwr_ok_oe (0.4) = 0 & psu1_led_y (0.3) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x18 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + # set psu1_pwr_ok_oe (0.4) = 0 & psu1_led_y (0.3) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x08 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set PSU2 LED +function _i2c_psu2_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x04 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + # set psu0_pwr_ok_oe (0.2) = 0 & psu0_led_y (0.1) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x06 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + # set psu0_pwr_ok_oe (0.2) = 0 & psu0_led_y (0.1) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x02 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + + i2cAddr=${I2C_ADDR_MUX_9535_11} + output_reg=${REG_PORT0_OUT} + + case ${FAN_TRAY} in + 4) + output_reg=${REG_PORT0_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 3) + output_reg=${REG_PORT0_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 2) + output_reg=${REG_PORT1_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 1) + output_reg=${REG_PORT1_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + *) + echo "Please input 1~4" + exit + ;; + esac + + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x33 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x33 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "Done" +} + +#Get Board Version and Type +function _i2c_board_type_get { + # read input port 1 value from io expander + input_reg=${REG_PORT1_IN} + boardType=`i2cget -y ${I2C_BUS_HW_ID} ${I2C_ADDR_MUX_9539_0} ${input_reg}` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "MAIN_BOARD BOARD_ID is 0x%02x, HW Rev %d, Build Rev %d\n" $boardId $boardHwRev $boardBuildRev +} + +#Get BMC Board Version and Type +function _i2c_bmc_board_type_get { + # read input port 1 value from io expander + input_reg=${REG_PORT1_IN} + boardType=`i2cget -y ${I2C_BUS_BMC_HW_ID} ${I2C_ADDR_MUX_9555_12} ${input_reg}` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "BMC_BOARD BOARD_ID is 0x%02x, HW Rev %d, Build Rev %d\n" $boardId $boardHwRev $boardBuildRev +} + +#Get PSU Status +function _i2c_psu_status { + local psu_abs="" + + psu1PwGood=`cat ${PATH_SYSFS_PSU1}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU1}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu1Exist=1 + else + psu1Exist=0 + fi + + psu2PwGood=`cat ${PATH_SYSFS_PSU2}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU2}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu2Exist=1 + else + psu2Exist=0 + fi + + printf "PSU1 Exist:%x PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + +#util functions +function _util_i2cset { + if [ "$DEBUG" == "on" ]; then + i2cset $@ + else + i2cset $@ 1>/dev/null + fi +} + +function _util_rmmod { + local mod=$1 + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod +} + +# get qsfp presence +function _util_get_qsfp_abs { + _qsfp_port_i2c_var_set ${QSFP_PORT} + + #status: 0 -> Down, 1 -> Up (ACTIVE_LOW_EN) + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) % 16 )) ))/value` +} + +# gpio init util function +function _util_gpio_export { + local gpio_n=$1 + local direction=$2 + local active_low=$3 + local value=$4 + + if [ -z "${gpio_n}" ]; then + echo "[gpio_init] gpio_n(${gpio_n}) is not provided" + return + fi + if [[ ${gpio_n} < 0 || ${gpio_n} > 255 ]]; then + echo "[gpio_init] gpio_n(${gpio_n}) is invalid value" + return + fi + + #export gpio + echo ${gpio_n} > /sys/class/gpio/export + + #set gpio active_low + echo ${active_low} > /sys/class/gpio/gpio${gpio_n}/active_low + + #set gpio direction and value + if [ "${direction}" == "out" ]; then + if [ -z "${value}" ]; then + echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + elif [ "${value}" == "0" ]; then + echo low > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + else + echo high > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + fi + elif [ "${direction}" == "in" ]; then + echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + if [ ! -z "${value}" ]; then + echo "Warning!! Unused Value (${value})" + fi + else + echo "Error!! Unknow Direction (${direction})" + fi +} + +# valid input number +function _util_input_check { + # input parameter validation + if [[ $1 -lt $2 || $1 -gt $3 ]]; then + echo "Please input number $2~$3" + exit + fi +} + +#Increase read socket buffer for CoPP Test +function _config_rmem { + echo "109430400" > /proc/sys/net/core/rmem_max +} + +#Main Function +function _main { + tart_time_str=`date` + start_time_sec=$(date +%s) + + _set_gpio_offset + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_fan_speed_init" ]; then + _i2c_fan_speed_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_init" ]; then + _i2c_gpio_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_deinit" ]; then + _i2c_gpio_deinit + elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then + _i2c_led_test + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_cb_eeprom_get" ]; then + _i2c_cb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_eeprom_sync" ]; then + _i2c_eeprom_sync + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_init" ]; then + _i2c_qsfp_eeprom_init ${QSFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_init" ]; then + _i2c_mb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_cb_eeprom_init" ]; then + _i2c_cb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_bmc_board_type_get" ]; then + _i2c_bmc_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_init + _i2c_led_test + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_cb_eeprom_get + _i2c_board_type_get + _i2c_bmc_board_type_get + _i2c_psu_status + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" + + echo "done!!!" + fi +} + +_main diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/qsfp_monitor.sh b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/qsfp_monitor.sh new file mode 100755 index 000000000000..249f179216a6 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/qsfp_monitor.sh @@ -0,0 +1,104 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..31}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1)` + local identifier=`echo "$qsfp_type" | grep '^identifier=.*$' | sed -e 's/identifier=//g'` + if [ "${identifier}" == "11" ]; then + connector=`echo "$qsfp_type" | grep '^connector=.*$' | sed -e 's/connector=//g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #Optical + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to Optical" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} optical $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main + diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/s9130_32x_monitor.sh b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/s9130_32x_monitor.sh new file mode 100755 index 000000000000..974da6d5001f --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/s9130_32x_monitor.sh @@ -0,0 +1,39 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + _led_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main \ No newline at end of file diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/README.md b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/README.md new file mode 100644 index 000000000000..d1a2d5464aee --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/README.md @@ -0,0 +1,182 @@ +# Ingrasys S9230-64X Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S9230-64X is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S9230-64X platform. + +### I2C i801 + +The I2C i801 on Ingrasys S9230-64X can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for power monitor, FAN controller, HWM and thermal sensors. + +### I2C PCA9548 +The PCA9548 module on S9230-64X can be found in +`/sys/bus/i2c/devices/i2c-1/` , `/sys/bus/i2c/devices/i2c-2/`, +`/sys/bus/i2c/devices/i2c-3/`, `/sys/bus/i2c/devices/i2c-4/`, +`/sys/bus/i2c/devices/i2c-5/`, `/sys/bus/i2c/devices/i2c-6/`, +`/sys/bus/i2c/devices/i2c-7/`, `/sys/bus/i2c/devices/i2c-8/` + +The pca9548 module for CPLD get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S9230-64X. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S9230-64X platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s9230-64X package is installed on the S9230-64X, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x55" > /sys/bus/i2c/devices/i2c-0/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/0-0055/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber on|off + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber on|off + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber on|off + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon7/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm1` setting fan1 to fan4, +`pwm2` setting fan5 to fan8. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + hexdump -C psu0.rom + hexdump -C psu1.rom + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the CPLD 1~5 according to port number. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-64] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_status_get [1-64] + 0 => not insert + 1 => inserted +``` + +### SFP+ +SFP+ modules are managed by the CPLD 1~2 according to port number. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +SFP EEPROM: + i2c_utils.sh i2c_sfp_eeprom_get [1-2] + +SFP Insert Event: + i2c_utils.sh i2c_sfp_status_get [1-2] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/Makefile b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/Makefile new file mode 100755 index 000000000000..3107674e8712 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/Makefile @@ -0,0 +1,3 @@ +obj-m := eeprom_mb.o +obj-m += ingrasys_s9230_64x_i2c_cpld.o +obj-m += ingrasys_s9230_64x_psu.o diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/eeprom_mb.c b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/eeprom_mb.c new file mode 100755 index 000000000000..528864d93382 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/eeprom_mb.c @@ -0,0 +1,267 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* enable dev_dbg print out */ +//#define DEBUG + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { /*0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57,*/ I2C_CLIENT_END }; + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 512 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, (u8)((addr >> 8) & 0xFF), (u8)(addr & 0xFF)); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static ssize_t mb_eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + int ret; + int i; + u8 cmd; + u16 value16; + + dev_dbg(&client->dev, "mb_eeprom_write off=%d, count=%d\n", (int)off, (int)count); + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + mutex_lock(&data->update_lock); + + for(i=0; i < count; i++) { + /* write command */ + cmd = (off >> 8) & 0xff; + value16 = off & 0xff; + value16 |= buf[i] << 8; + ret = i2c_smbus_write_word_data(client, cmd, value16); + + if (ret < 0) { + dev_err(&client->dev, "write address failed at %d \n", (int)off); + goto exit; + } + + off++; + + /* need to wait for write complete */ + udelay(10000); + } +exit: + mutex_unlock(&data->update_lock); + /* force to update client when reading */ + for(i=0; i < SLICE_NUM; i++) { + data->last_updated[i] = 0; + } + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO | S_IWUSR, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, + .write = mb_eeprom_write, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x51 and 0x55. So decline + attaching to addresses >= 0x56 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x56) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys Mother Borad EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_i2c_cpld.c b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_i2c_cpld.c new file mode 100644 index 000000000000..7d832fc0149f --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_i2c_cpld.c @@ -0,0 +1,1259 @@ +/* + * A i2c cpld driver for the ingrasys_s9230_64x + * + * Copyright (C) 2017 Ingrasys Technology Corporation. + * Leo Lin + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ingrasys_s9230_64x_i2c_cpld.h" + +#ifdef DEBUG +#define DEBUG_PRINT(fmt, args...) \ + printk(KERN_INFO "%s:%s[%d]: " fmt "\r\n", \ + __FILE__, __func__, __LINE__, ##args) +#else +#define DEBUG_PRINT(fmt, args...) +#endif + +#define I2C_READ_BYTE_DATA(ret, lock, i2c_client, reg) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_read_byte_data(i2c_client, reg); \ + mutex_unlock(lock); \ +} +#define I2C_WRITE_BYTE_DATA(ret, lock, i2c_client, reg, val) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_write_byte_data(i2c_client, reg, val); \ + mutex_unlock(lock); \ +} + +/* CPLD sysfs attributes index */ +enum s9230_64x_cpld_sysfs_attributes { + CPLD_ACCESS_REG, + CPLD_REGISTER_VAL, + CPLD_PORT_START, + CPLD_PORTS, + CPLD_VERSION, + CPLD_ID, + CPLD_BOARD_TYPE, + CPLD_EXT_BOARD_TYPE, + CPLD_QSFP_PORT_STATUS_1, + CPLD_QSFP_PORT_STATUS_2, + CPLD_QSFP_PORT_STATUS_3, + CPLD_QSFP_PORT_STATUS_4, + CPLD_QSFP_PORT_STATUS_5, + CPLD_QSFP_PORT_STATUS_6, + CPLD_QSFP_PORT_STATUS_7, + CPLD_QSFP_PORT_STATUS_8, + CPLD_QSFP_PORT_STATUS_9, + CPLD_QSFP_PORT_STATUS_10, + CPLD_QSFP_PORT_STATUS_11, + CPLD_QSFP_PORT_STATUS_12, + CPLD_QSFP_PORT_STATUS_13, + CPLD_QSFP_PORT_CONFIG_1, + CPLD_QSFP_PORT_CONFIG_2, + CPLD_QSFP_PORT_CONFIG_3, + CPLD_QSFP_PORT_CONFIG_4, + CPLD_QSFP_PORT_CONFIG_5, + CPLD_QSFP_PORT_CONFIG_6, + CPLD_QSFP_PORT_CONFIG_7, + CPLD_QSFP_PORT_CONFIG_8, + CPLD_QSFP_PORT_CONFIG_9, + CPLD_QSFP_PORT_CONFIG_10, + CPLD_QSFP_PORT_CONFIG_11, + CPLD_QSFP_PORT_CONFIG_12, + CPLD_QSFP_PORT_CONFIG_13, + CPLD_QSFP_PORT_INTERRUPT, + CPLD_SFP_PORT_STATUS, + CPLD_SFP_PORT_CONFIG, + CPLD_10GMUX_CONFIG, + CPLD_BMC_STATUS, + CPLD_BMC_WATCHDOG, + CPLD_USB_STATUS, +}; + +/* CPLD sysfs attributes hook functions */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t get_qsfp_port_start(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t get_qsfp_ports(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_cpld_id(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_qsfp_port_status(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_qsfp_port_config(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_qsfp_port_config(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_qsfp_port_interrupt(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_sfp_port_status(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_sfp_port_config(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_sfp_port_config(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_10gmux_config(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_10gmux_config(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_bmc_status(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_bmc_watchdog(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_bmc_watchdog(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_usb_status(struct device *dev, + struct device_attribute *da, char *buf); + +static LIST_HEAD(cpld_client_list); /* client list for cpld */ +static struct mutex list_lock; /* mutex for client list */ + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +struct cpld_data { + int index; /* CPLD index */ + struct mutex access_lock; /* mutex for cpld access */ + u8 access_reg; /* register to access */ +}; + +/* CPLD device id and data */ +static const struct i2c_device_id ingrasys_i2c_cpld_id[] = { + { "ingrasys_cpld1", cpld1 }, + { "ingrasys_cpld2", cpld2 }, + { "ingrasys_cpld3", cpld3 }, + { "ingrasys_cpld4", cpld4 }, + { "ingrasys_cpld5", cpld5 }, + {} +}; + +/* Addresses scanned for ingrasys_i2c_cpld */ +static const unsigned short cpld_i2c_addr[] = { 0x33, I2C_CLIENT_END }; + +/* define all support register access of cpld in attribute */ +static SENSOR_DEVICE_ATTR(cpld_access_register, S_IWUSR | S_IRUGO, + read_access_register, write_access_register, CPLD_ACCESS_REG); +static SENSOR_DEVICE_ATTR(cpld_register_value, S_IWUSR | S_IRUGO, + read_register_value, write_register_value, CPLD_REGISTER_VAL); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_start, S_IRUGO, + get_qsfp_port_start, NULL, CPLD_PORT_START); +static SENSOR_DEVICE_ATTR(cpld_qsfp_ports, S_IRUGO, + get_qsfp_ports, NULL, CPLD_PORTS); +static SENSOR_DEVICE_ATTR(cpld_version, S_IRUGO, + read_cpld_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(cpld_id, S_IRUGO, read_cpld_id, NULL, CPLD_ID); +static SENSOR_DEVICE_ATTR(cpld_board_type, S_IRUGO, + read_board_type, NULL, CPLD_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_ext_board_type, S_IRUGO, + read_ext_board_type, NULL, CPLD_EXT_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_1, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_1); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_2, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_2); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_3, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_3); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_4, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_4); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_5, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_5); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_6, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_6); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_7, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_7); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_8, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_8); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_9, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_9); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_10, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_10); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_11, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_11); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_12, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_12); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_13, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_13); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_1, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, CPLD_QSFP_PORT_CONFIG_1); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_2, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_2); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_3, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_3); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_4, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_4); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_5, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_5); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_6, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_6); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_7, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_7); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_8, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_8); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_9, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_9); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_10, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_10); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_11, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_11); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_12, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_12); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_13, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_13); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_interrupt, S_IRUGO, + read_qsfp_port_interrupt, NULL, CPLD_QSFP_PORT_INTERRUPT); +static SENSOR_DEVICE_ATTR(cpld_sfp_port_status, S_IRUGO, + read_sfp_port_status, NULL, CPLD_SFP_PORT_STATUS); +static SENSOR_DEVICE_ATTR(cpld_sfp_port_config, S_IWUSR | S_IRUGO, + read_sfp_port_config, write_sfp_port_config, CPLD_SFP_PORT_CONFIG); +static SENSOR_DEVICE_ATTR(cpld_10gmux_config, S_IWUSR | S_IRUGO, + read_10gmux_config, write_10gmux_config, + CPLD_10GMUX_CONFIG); +static SENSOR_DEVICE_ATTR(cpld_bmc_status, S_IRUGO, + read_bmc_status, NULL, CPLD_BMC_STATUS); +static SENSOR_DEVICE_ATTR(cpld_bmc_watchdog, S_IWUSR | S_IRUGO, + read_bmc_watchdog, write_bmc_watchdog, + CPLD_BMC_WATCHDOG); +static SENSOR_DEVICE_ATTR(cpld_usb_status, S_IRUGO, + read_usb_status, NULL, CPLD_USB_STATUS); + + +/* define support attributes of cpldx , total 5 */ +/* cpld 1 */ +static struct attribute *s9230_64x_cpld1_attributes[] = { + &sensor_dev_attr_cpld_access_register.dev_attr.attr, + &sensor_dev_attr_cpld_register_value.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_start.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_ports.dev_attr.attr, + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_cpld_id.dev_attr.attr, + &sensor_dev_attr_cpld_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_ext_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_interrupt.dev_attr.attr, + &sensor_dev_attr_cpld_sfp_port_status.dev_attr.attr, + &sensor_dev_attr_cpld_sfp_port_config.dev_attr.attr, + &sensor_dev_attr_cpld_10gmux_config.dev_attr.attr, + &sensor_dev_attr_cpld_bmc_status.dev_attr.attr, + &sensor_dev_attr_cpld_bmc_watchdog.dev_attr.attr, + &sensor_dev_attr_cpld_usb_status.dev_attr.attr, + NULL +}; +/* cpld 2 */ +static struct attribute *s9230_64x_cpld2_attributes[] = { + &sensor_dev_attr_cpld_access_register.dev_attr.attr, + &sensor_dev_attr_cpld_register_value.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_start.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_ports.dev_attr.attr, + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_cpld_id.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_13.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_13.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_interrupt.dev_attr.attr, + &sensor_dev_attr_cpld_sfp_port_status.dev_attr.attr, + &sensor_dev_attr_cpld_sfp_port_config.dev_attr.attr, + NULL +}; +/* cpld 3 / cpld 4 / cpld 5 */ +static struct attribute *s9230_64x_cpld345_attributes[] = { +&sensor_dev_attr_cpld_access_register.dev_attr.attr, + &sensor_dev_attr_cpld_register_value.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_start.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_ports.dev_attr.attr, + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_cpld_id.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_13.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_13.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_interrupt.dev_attr.attr, + NULL +}; + +/* cpld 1 attributes group */ +static const struct attribute_group s9230_64x_cpld1_group = { + .attrs = s9230_64x_cpld1_attributes, +}; +/* cpld 2 attributes group */ +static const struct attribute_group s9230_64x_cpld2_group = { + .attrs = s9230_64x_cpld2_attributes, +}; +/* cpld 3/4/5 attributes group */ +static const struct attribute_group s9230_64x_cpld345_group = { + .attrs = s9230_64x_cpld345_attributes, +}; + +/* read access register from cpld data */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + + return sprintf(buf, "0x%x\n", reg); +} + +/* write access register to cpld data */ +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + + if (kstrtou8(buf, 0, ®) < 0) + return -EINVAL; + + data->access_reg = reg; + return count; +} + +/* read the value of access register in cpld data */ +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + int reg_val; + + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + + if (reg_val < 0) + return -1; + + return sprintf(buf, "0x%x\n", reg_val); +} + +/* wrtie the value to access register in cpld data */ +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int ret = -EIO; + u8 reg = data->access_reg; + u8 reg_val; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, client, reg, reg_val); + + return count; +} + +/* get qsfp port start number of the cpld device */ +/* the start number use to tranlate qsfp port to cpld port */ +/* the cpld port use to access the qsfp port register in cpld */ +static ssize_t get_qsfp_port_start(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int port_base_num; + + if (attr->index == CPLD_PORT_START) { + if (data->index == cpld1) { + port_base_num = 1; + } else { + port_base_num = CPLD_1_PORT_NUM + + CPLD_2_PORT_NUM*(data->index - 1) + 1; + } + return sprintf(buf, "%d\n", port_base_num); + } + return -1; +} + +/* get total qsfp port which contain register in the cpld device */ +static ssize_t get_qsfp_ports(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int ports; + + if (attr->index == CPLD_PORTS) { + if (data->index == cpld1) + ports = CPLD_1_PORT_NUM; + else + ports = CPLD_2_PORT_NUM; + return sprintf(buf, "%d\n", ports); + } + return -1; +} + +/* get cpdl version register value */ +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_VERSION) { + reg = CPLD_VERSION_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get cpdl id register value */ +static ssize_t read_cpld_id(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_ID) { + reg = CPLD_ID_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get board type register value */ +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BOARD_TYPE) { + reg = CPLD_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_EXT_BOARD_TYPE) { + reg = CPLD_EXT_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get qsfp port status register value */ +static ssize_t read_qsfp_port_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index >= CPLD_QSFP_PORT_STATUS_1 && + attr->index <= CPLD_QSFP_PORT_STATUS_13) { + reg = CPLD_QSFP_PORT_STATUS_BASE_REG + + (attr->index - CPLD_QSFP_PORT_STATUS_1); + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get qsfp port config register value */ +static ssize_t read_qsfp_port_config(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index >= CPLD_QSFP_PORT_CONFIG_1 && + attr->index <= CPLD_QSFP_PORT_CONFIG_13) { + reg = CPLD_QSFP_PORT_CONFIG_BASE_REG + + (attr->index - CPLD_QSFP_PORT_CONFIG_1); + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to qsfp port config register */ +static ssize_t write_qsfp_port_config(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index >= CPLD_QSFP_PORT_CONFIG_1 && + attr->index <= CPLD_QSFP_PORT_CONFIG_13) { + reg = CPLD_QSFP_PORT_CONFIG_BASE_REG + + (attr->index - CPLD_QSFP_PORT_CONFIG_1); + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get qsfp port interrupt register value */ +static ssize_t read_qsfp_port_interrupt(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_QSFP_PORT_INTERRUPT) { + reg = CPLD_QSFP_PORT_INTERRUPT_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get sfp port status register value */ +static ssize_t read_sfp_port_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_SFP_PORT_STATUS) { + reg = CPLD_SFP_PORT_STATUS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get sfp port config register value */ +static ssize_t read_sfp_port_config(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_SFP_PORT_CONFIG) { + reg = CPLD_SFP_PORT_CONFIG_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to sfp port config register */ +static ssize_t write_sfp_port_config(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_SFP_PORT_CONFIG) { + reg = CPLD_SFP_PORT_CONFIG_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get 10g mux config register value */ +static ssize_t read_10gmux_config(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_10GMUX_CONFIG) { + reg = CPLD_10GMUX_CONFIG_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to 10g mux config register */ +static ssize_t write_10gmux_config(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_10GMUX_CONFIG) { + reg = CPLD_10GMUX_CONFIG_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get bmc status register value */ +static ssize_t read_bmc_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BMC_STATUS) { + reg = CPLD_BMC_STATUS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get bmc watchdog register value */ +static ssize_t read_bmc_watchdog(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BMC_WATCHDOG) { + reg = CPLD_BMC_WATCHDOG_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to bmc watchdog register */ +static ssize_t write_bmc_watchdog(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_BMC_WATCHDOG) { + reg = CPLD_BMC_WATCHDOG_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get usb status register value */ +static ssize_t read_usb_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_USB_STATUS) { + reg = CPLD_USB_STATUS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* add valid cpld client to list */ +static void ingrasys_i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = NULL; + + node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + if (!node) { + dev_info(&client->dev, + "Can't allocate cpld_client_node for index %d\n", + client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +/* remove exist cpld client in list */ +static void ingrasys_i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + mutex_unlock(&list_lock); +} + +/* cpld drvier probe */ +static int ingrasys_i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + struct cpld_data *data = NULL; + int ret = -EPERM; + int err; + int idx; + + data = kzalloc(sizeof(struct cpld_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* init cpld data for client */ + i2c_set_clientdata(client, data); + mutex_init(&data->access_lock); + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_info(&client->dev, + "i2c_check_functionality failed (0x%x)\n", + client->addr); + status = -EIO; + goto exit; + } + + /* get cpld id from device */ + ret = i2c_smbus_read_byte_data(client, CPLD_ID_REG); + + if (ret < 0) { + dev_info(&client->dev, + "fail to get cpld id (0x%x) at addr (0x%x)\n", + CPLD_ID_REG, client->addr); + status = -EIO; + goto exit; + } + + CPLD_ID_ID_GET(ret, idx); + + if (INVALID(idx, cpld1, cpld5)) { + dev_info(&client->dev, + "cpld id %d(device) not valid\n", idx); + //status = -EPERM; + //goto exit; + } + +#if 0 + /* change client name for each cpld with index */ + snprintf(client->name, sizeof(client->name), "%s_%d", client->name, + data->index); +#endif + + data->index = dev_id->driver_data; + + /* register sysfs hooks for different cpld group */ + dev_info(&client->dev, "probe cpld with index %d\n", data->index); + switch (data->index) { + case cpld1: + status = sysfs_create_group(&client->dev.kobj, + &s9230_64x_cpld1_group); + break; + case cpld2: + status = sysfs_create_group(&client->dev.kobj, + &s9230_64x_cpld2_group); + break; + case cpld3: + case cpld4: + case cpld5: + status = sysfs_create_group(&client->dev.kobj, + &s9230_64x_cpld345_group); + break; + default: + status = -EINVAL; + } + + if (status) + goto exit; + + dev_info(&client->dev, "chip found\n"); + + /* add probe chip to client list */ + ingrasys_i2c_cpld_add_client(client); + + return 0; +exit: + sysfs_remove_group(&client->dev.kobj, &s9230_64x_cpld345_group); + return status; +} + +/* cpld drvier remove */ +static int ingrasys_i2c_cpld_remove(struct i2c_client *client) +{ + struct cpld_data *data = i2c_get_clientdata(client); + + switch (data->index) { + case cpld1: + sysfs_remove_group(&client->dev.kobj, &s9230_64x_cpld1_group); + break; + case cpld2: + sysfs_remove_group(&client->dev.kobj, &s9230_64x_cpld2_group); + break; + case cpld3: + case cpld4: + case cpld5: + sysfs_remove_group(&client->dev.kobj, + &s9230_64x_cpld345_group); + break; + } + + ingrasys_i2c_cpld_remove_client(client); + return 0; +} + +MODULE_DEVICE_TABLE(i2c, ingrasys_i2c_cpld_id); + +static struct i2c_driver ingrasys_i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ingrasys_i2c_cpld", + }, + .probe = ingrasys_i2c_cpld_probe, + .remove = ingrasys_i2c_cpld_remove, + .id_table = ingrasys_i2c_cpld_id, + .address_list = cpld_i2c_addr, +}; + +/* provid cpld register read */ +/* cpld_idx indicate the index of cpld device */ +int ingrasys_i2c_cpld_read(u8 cpld_idx, + u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + struct cpld_data *data; + + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + data = i2c_get_clientdata(cpld_node->client); + if (data->index == cpld_idx) { + DEBUG_PRINT("cpld_idx=%d, read reg 0x%02x", + cpld_idx, reg); + I2C_READ_BYTE_DATA(ret, &data->access_lock, + cpld_node->client, reg); + DEBUG_PRINT("cpld_idx=%d, read reg 0x%02x = 0x%02x", + cpld_idx, reg, ret); + break; + } + } + + return ret; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_read); + +/* provid cpld register write */ +/* cpld_idx indicate the index of cpld device */ +int ingrasys_i2c_cpld_write(u8 cpld_idx, + u8 reg, + u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + struct cpld_data *data; + + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + data = i2c_get_clientdata(cpld_node->client); + + if (data->index == cpld_idx) { + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + cpld_node->client, + reg, value); + DEBUG_PRINT("cpld_idx=%d, write reg 0x%02x val 0x%02x, ret=%d", + cpld_idx, reg, value, ret); + break; + } + } + + return ret; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_write); + +/* provid qsfp port status register read */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_get_qsfp_port_status_val(u8 port_num) +{ + u8 cpld_idx, cpld_port, reg; + int reg_val; + + if (INVALID(port_num, QSFP_MIN_PORT_NUM, QSFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + QSFP_TO_CPLD_IDX(port_num, cpld_idx, cpld_port); + reg = QSFP_PORT_STATUS_REG(cpld_port); + DEBUG_PRINT("port_num=%d, cpld_idx=%d, cpld_port=%d, reg=0x%x", + port_num, cpld_idx, cpld_port, reg); + reg_val = ingrasys_i2c_cpld_read(cpld_idx, reg); + return reg_val; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_get_qsfp_port_status_val); + +/* provid qsfp port config register read */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_get_qsfp_port_config_val(u8 port_num) +{ + u8 cpld_idx, cpld_port, reg; + int reg_val; + + if (INVALID(port_num, QSFP_MIN_PORT_NUM, QSFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + QSFP_TO_CPLD_IDX(port_num, cpld_idx, cpld_port); + reg = QSFP_PORT_CONFIG_REG(cpld_port); + DEBUG_PRINT("port_num=%d, cpld_idx=%d, cpld_port=%d, reg=0x%x", + port_num, cpld_idx, cpld_port, reg); + reg_val = ingrasys_i2c_cpld_read(cpld_idx, reg); + return reg_val; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_get_qsfp_port_config_val); + +/* provid qsfp port config register write */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_set_qsfp_port_config_val(u8 port_num, + u8 reg_val) +{ + u8 cpld_idx, cpld_port, reg, ret; + + if (INVALID(port_num, QSFP_MIN_PORT_NUM, QSFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + QSFP_TO_CPLD_IDX(port_num, cpld_idx, cpld_port); + reg = QSFP_PORT_CONFIG_REG(cpld_port); + DEBUG_PRINT("port_num=%d, cpld_idx=%d, cpld_port=%d, reg=0x%x", + port_num, cpld_idx, cpld_port, reg); + ret = ingrasys_i2c_cpld_write(cpld_idx, reg, reg_val); + return ret; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_set_qsfp_port_config_val); + +/* provid sfp port status register read */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_get_sfp_port_status_val(u8 port_num) +{ + u8 cpld_idx, reg; + int reg_val; + + if (INVALID(port_num, SFP_MIN_PORT_NUM, SFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + SFP_TO_CPLD_IDX(port_num, cpld_idx); + reg = CPLD_SFP_PORT_STATUS_REG; + DEBUG_PRINT("port_num=%d, cpld_idx=%d, reg=0x%x", + port_num, cpld_idx, reg); + reg_val = ingrasys_i2c_cpld_read(cpld_idx, reg); + return reg_val; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_get_sfp_port_status_val); + +/* provid qsfp port config register read */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_get_sfp_port_config_val(u8 port_num) +{ + u8 cpld_idx, reg; + int reg_val; + + if (INVALID(port_num, SFP_MIN_PORT_NUM, SFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + SFP_TO_CPLD_IDX(port_num, cpld_idx); + reg = CPLD_SFP_PORT_CONFIG_REG; + DEBUG_PRINT("port_num=%d, cpld_idx=%d, reg=0x%x", + port_num, cpld_idx, reg); + reg_val = ingrasys_i2c_cpld_read(cpld_idx, reg); + return reg_val; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_get_sfp_port_config_val); + +/* provid qsfp port config register write */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_set_sfp_port_config_val(u8 port_num, + u8 reg_val) +{ + u8 cpld_idx, reg, ret; + + if (INVALID(port_num, SFP_MIN_PORT_NUM, SFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + SFP_TO_CPLD_IDX(port_num, cpld_idx); + reg = CPLD_SFP_PORT_CONFIG_REG; + DEBUG_PRINT("port_num=%d, cpld_idx=%d, reg=0x%x", + port_num, cpld_idx, reg); + ret = ingrasys_i2c_cpld_write(cpld_idx, reg, reg_val); + return ret; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_set_sfp_port_config_val); + +static int __init ingrasys_i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&ingrasys_i2c_cpld_driver); +} + +static void __exit ingrasys_i2c_cpld_exit(void) +{ + i2c_del_driver(&ingrasys_i2c_cpld_driver); +} + +MODULE_AUTHOR("Leo Lin "); +MODULE_DESCRIPTION("ingrasys_i2c_cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(ingrasys_i2c_cpld_init); +module_exit(ingrasys_i2c_cpld_exit); + diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_i2c_cpld.h b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_i2c_cpld.h new file mode 100644 index 000000000000..e0e53174d675 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_i2c_cpld.h @@ -0,0 +1,223 @@ +/* header file for i2c cpld driver of ingrasys_s9230_64x + * + * Copyright (C) 2017 Ingrasys Technology Corporation. + * Leo Lin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef INGRASYS_S9230_64X_I2C_CPLD_H +#define INGRASYS_S9230_64X_I2C_CPLD_H + +/* CPLD device index value */ +enum cpld_id { + cpld1, + cpld2, + cpld3, + cpld4, + cpld5 +}; + +/* port number on CPLD */ +#define CPLD_1_PORT_NUM 12 +#define CPLD_2_PORT_NUM 13 + +/* QSFP port number */ +#define QSFP_MAX_PORT_NUM 64 +#define QSFP_MIN_PORT_NUM 1 + +/* SFP+ port number */ +#define SFP_MAX_PORT_NUM 2 +#define SFP_MIN_PORT_NUM 1 + + +/* CPLD registers */ +#define CPLD_BOARD_TYPE_REG 0x0 +#define CPLD_EXT_BOARD_TYPE_REG 0x7 +#define CPLD_VERSION_REG 0x1 +#define CPLD_ID_REG 0x2 +#define CPLD_QSFP_PORT_STATUS_BASE_REG 0x20 +#define CPLD_QSFP_PORT_CONFIG_BASE_REG 0x30 +#define CPLD_QSFP_PORT_INTERRUPT_REG 0x40 +#define CPLD_SFP_PORT_STATUS_REG 0x2F +#define CPLD_SFP_PORT_CONFIG_REG 0x3F +#define CPLD_QSFP_PORT_INTERRUPT_REG 0x40 +#define CPLD_10GMUX_CONFIG_REG 0x41 +#define CPLD_BMC_STATUS_REG 0x42 +#define CPLD_BMC_WATCHDOG_REG 0x43 +#define CPLD_USB_STATUS_REG 0x44 +#define CPLD_REST_CONTROL_REG 0x4A + + +/* bit definition for register value */ +enum CPLD_QSFP_PORT_STATUS_BITS { + CPLD_QSFP_PORT_STATUS_INT_BIT, + CPLD_QSFP_PORT_STATUS_ABS_BIT, +}; +enum CPLD_QSFP_PORT_CONFIG_BITS { + CPLD_QSFP_PORT_CONFIG_RESET_BIT, + CPLD_QSFP_PORT_CONFIG_RESERVE_BIT, + CPLD_QSFP_PORT_CONFIG_LPMODE_BIT, +}; +enum CPLD_SFP_PORT_STATUS_BITS { + CPLD_SFP_PORT_STATUS_PRESENT_BIT, + CPLD_SFP_PORT_STATUS_TXFAULT_BIT, + CPLD_SFP_PORT_STATUS_RXLOS_BIT, +}; +enum CPLD_SFP_PORT_CONFIG_BITS { + CPLD_SFP_PORT_CONFIG_TXDIS_BIT, + CPLD_SFP_PORT_CONFIG_RS_BIT, + CPLD_SFP_PORT_CONFIG_TS_BIT, +}; +enum CPLD_10GMUX_CONFIG_BITS { + CPLD_10GMUX_CONFIG_ENSMB_BIT, + CPLD_10GMUX_CONFIG_ENINPUT_BIT, + CPLD_10GMUX_CONFIG_SEL1_BIT, + CPLD_10GMUX_CONFIG_SEL0_BIT, +}; +enum CPLD_BMC_WATCHDOG_BITS { + CPLD_10GMUX_CONFIG_ENTIMER_BIT, + CPLD_10GMUX_CONFIG_TIMEOUT_BIT, +}; +enum CPLD_RESET_CONTROL_BITS { + CPLD_RESET_CONTROL_SWRST_BIT, + CPLD_RESET_CONTROL_CP2104RST_BIT, + CPLD_RESET_CONTROL_82P33814RST_BIT, + CPLD_RESET_CONTROL_BMCRST_BIT, +}; + +/* bit field structure for register value */ +struct cpld_reg_board_type_t { + u8 build_rev:2; + u8 hw_rev:2; + u8 board_id:4; +}; + +struct cpld_reg_version_t { + u8 revision:6; + u8 release:1; + u8 reserve:1; +}; + +struct cpld_reg_id_t { + u8 id:3; + u8 release:5; +}; + +/* common manipulation */ +#define INVALID(i, min, max) ((i < min) || (i > max) ? 1u : 0u) +#define READ_BIT(val, bit) ((0u == (val & (1<bf_name) +#define READ_BF_1(bf_struct, val, bf_name, bf_value) \ + bf_struct bf; \ + bf.data = val; \ + bf_value = bf.bf_name +#define BOARD_TYPE_BUILD_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, build_rev, res) +#define BOARD_TYPE_HW_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, hw_rev, res) +#define BOARD_TYPE_BOARD_ID_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, board_id, res) +#define CPLD_VERSION_REV_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, revision, res) +#define CPLD_VERSION_REL_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, release, res) +#define CPLD_ID_ID_GET(val, res) \ + READ_BF(cpld_reg_id_t, val, id, res) +#define CPLD_ID_REL_GET(val, res) \ + READ_BF(cpld_reg_id_t, val, release, res) +/* QSFP/SFP registers manipulation */ +#define QSFP_TO_CPLD_IDX(qsfp_port, cpld_index, cpld_port) \ +{ \ + if (QSFP_MIN_PORT_NUM <= qsfp_port && qsfp_port <= CPLD_1_PORT_NUM) { \ + cpld_index = cpld1; \ + cpld_port = qsfp_port - 1; \ + } else if (CPLD_1_PORT_NUM < qsfp_port \ + && qsfp_port <= QSFP_MAX_PORT_NUM) { \ + cpld_index = cpld2 + (qsfp_port - 1 - CPLD_1_PORT_NUM) \ + / CPLD_2_PORT_NUM; \ + cpld_port = (qsfp_port - 1 - CPLD_1_PORT_NUM) % \ + CPLD_2_PORT_NUM; \ + } else { \ + cpld_index = 0; \ + cpld_port = 0; \ + } \ +} +#define SFP_TO_CPLD_IDX(sfp_port, cpld_index) \ + (cpld_index = sfp_port - SFP_MIN_PORT_NUM) +#define QSFP_PORT_STATUS_REG(cpld_port) \ + (CPLD_QSFP_PORT_STATUS_BASE_REG + cpld_port) +#define QSFP_PORT_CONFIG_REG(cpld_port) \ + (CPLD_QSFP_PORT_CONFIG_BASE_REG + cpld_port) +#define QSFP_PORT_INT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_INT_BIT) +#define QSFP_PORT_ABS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_ABS_BIT) +#define QSFP_PORT_RESET_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_RESET_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_RESET_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_LPMODE_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define SFP_PORT_PRESENT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_PRESENT_BIT) + +#define SFP_PORT_TXFAULT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_TXFAULT_BIT) +#define SFP_PORT_RXLOS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_RXLOS_BIT) +#define SFP_PORT_TXDIS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_RS_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_TS_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) +#define SFP_PORT_TXDIS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_TXDIS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_RS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_RS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_TS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) +#define SFP_PORT_TS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) + +/* CPLD access functions */ +extern int ingrasys_i2c_cpld_get_qsfp_port_status_val(u8 port_num); +extern int ingrasys_i2c_cpld_get_qsfp_port_config_val(u8 port_num); +extern int ingrasys_i2c_cpld_set_qsfp_port_config_val(u8 port_num, u8 reg_val); +extern int ingrasys_i2c_cpld_get_sfp_port_status_val(u8 port_num); +extern int ingrasys_i2c_cpld_get_sfp_port_config_val(u8 port_num); +extern int ingrasys_i2c_cpld_set_sfp_port_config_val(u8 port_num, u8 reg_val); +extern u8 fp_port_to_phy_port(u8 fp_port); +#endif + diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_platform.h b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_platform.h new file mode 100644 index 000000000000..a14853fdae9c --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_platform.h @@ -0,0 +1,148 @@ +#ifndef _S9230_64X_PLATFORM_H +#define _S9230_64X_PLATFORM_H + +#include + +// remove debug before release +#define DEBUG + +enum bus_order { + I2C_BUS_MAIN, + MUX_9548_0_CH0, + MUX_9548_0_CH1, + MUX_9548_0_CH2, + MUX_9548_0_CH3, + MUX_9548_0_CH4, + MUX_9548_0_CH5, + MUX_9548_0_CH6, + MUX_9548_0_CH7, + MUX_9548_1_CH0, + MUX_9548_1_CH1, + MUX_9548_1_CH2, + MUX_9548_1_CH3, + MUX_9548_1_CH4, + MUX_9548_1_CH5, + MUX_9548_1_CH6, + MUX_9548_1_CH7, + MUX_9546_0_CH0, + MUX_9546_0_CH1, + MUX_9546_0_CH2, + MUX_9546_0_CH3, + MUX_9546_1_CH0, + MUX_9546_1_CH1, + MUX_9546_1_CH2, + MUX_9546_1_CH3, + MUX_9548_2_CH0, + MUX_9548_2_CH1, + MUX_9548_2_CH2, + MUX_9548_2_CH3, + MUX_9548_2_CH4, + MUX_9548_2_CH5, + MUX_9548_2_CH6, + MUX_9548_2_CH7, + MUX_9548_3_CH0, + MUX_9548_3_CH1, + MUX_9548_3_CH2, + MUX_9548_3_CH3, + MUX_9548_3_CH4, + MUX_9548_3_CH5, + MUX_9548_3_CH6, + MUX_9548_3_CH7, + MUX_9548_4_CH0, + MUX_9548_4_CH1, + MUX_9548_4_CH2, + MUX_9548_4_CH3, + MUX_9548_4_CH4, + MUX_9548_4_CH5, + MUX_9548_4_CH6, + MUX_9548_4_CH7, + MUX_9548_5_CH0, + MUX_9548_5_CH1, + MUX_9548_5_CH2, + MUX_9548_5_CH3, + MUX_9548_5_CH4, + MUX_9548_5_CH5, + MUX_9548_5_CH6, + MUX_9548_5_CH7, + MUX_9548_6_CH0, + MUX_9548_6_CH1, + MUX_9548_6_CH2, + MUX_9548_6_CH3, + MUX_9548_6_CH4, + MUX_9548_6_CH5, + MUX_9548_6_CH6, + MUX_9548_6_CH7, + MUX_9548_7_CH0, + MUX_9548_7_CH1, + MUX_9548_7_CH2, + MUX_9548_7_CH3, + MUX_9548_7_CH4, + MUX_9548_7_CH5, + MUX_9548_7_CH6, + MUX_9548_7_CH7, + MUX_9548_8_CH0, + MUX_9548_8_CH1, + MUX_9548_8_CH2, + MUX_9548_8_CH3, + MUX_9548_8_CH4, + MUX_9548_8_CH5, + MUX_9548_8_CH6, + MUX_9548_8_CH7, + MUX_9548_9_CH0, + MUX_9548_9_CH1, + MUX_9548_9_CH2, + MUX_9548_9_CH3, + MUX_9548_9_CH4, + MUX_9548_9_CH5, + MUX_9548_9_CH6, + MUX_9548_9_CH7, + MUX_9548_10_CH0, + MUX_9548_10_CH1, + MUX_9548_10_CH2, + MUX_9548_10_CH3, + MUX_9548_10_CH4, + MUX_9548_10_CH5, + MUX_9548_10_CH6, + MUX_9548_10_CH7, +}; + +#define I2C_ADDR_MUX_9555_0 (0x20) +#define I2C_ADDR_MUX_9555_1 (0x24) +#define I2C_ADDR_MUX_9555_2 (0x25) +#define I2C_ADDR_MUX_9555_3 (0x26) +#define I2C_ADDR_MUX_9539_0 (0x76) +#define I2C_ADDR_MUX_9539_1 (0x76) +#define I2C_BUS_FAN_STATUS (I2C_BUS_MAIN) +#define I2C_BUS_SYS_LED (MUX_9548_1_CH1) + +#define NUM_OF_I2C_MUX (11) +#define NUM_OF_CPLD (5) +#define NUM_OF_QSFP_PORT (64) +#define NUM_OF_SFP_PORT (2) +#define QSFP_EEPROM_I2C_ADDR (0x50) + +enum gpio_reg { + REG_PORT0_IN, + REG_PORT1_IN, + REG_PORT0_OUT, + REG_PORT1_OUT, + REG_PORT0_POL, + REG_PORT1_POL, + REG_PORT0_DIR, + REG_PORT1_DIR, +}; + +struct ing_i2c_board_info { + int ch; + int size; + struct i2c_board_info *board_info; +}; + +struct i2c_init_data { + __u16 ch; + __u16 addr; + __u8 reg; + __u8 value; +}; + +#endif diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_psu.c b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_psu.c new file mode 100644 index 000000000000..694b57bd748d --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/modules/ingrasys_s9230_64x_psu.c @@ -0,0 +1,388 @@ +/* + * S9230-64x PSU driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ingrasys_s9230_64x_platform.h" + +static ssize_t show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf); +static struct s9230_psu_data *s9230_psu_update_status(struct device *dev); +static struct s9230_psu_data *s9230_psu_update_eeprom(struct device *dev); +static int s9230_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len); + + +#define DRIVER_NAME "psu" + +// Addresses scanned +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; + +/* PSU EEPROM SIZE */ +#define EEPROM_SZ 256 +#define READ_EEPROM 1 +#define NREAD_EEPROM 0 + +static struct i2c_client pca9555_client; + +/* pca9555 gpio pin mapping */ +#define PSU2_PWROK 0 +#define PSU2_PRSNT_L 1 +#define PSU2_PWRON_L 2 +#define PSU1_PWROK 3 +#define PSU1_PRSNT_L 4 +#define PSU1_PWRON_L 5 +#define TMP_75_INT_L 6 + +/* Driver Private Data */ +struct s9230_psu_data { + struct mutex lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + s32 status; /* IO expander value */ + char eeprom[EEPROM_SZ]; /* psu eeprom data */ + char psuABS; /* PSU absent */ + char psuPG; /* PSU power good */ +}; + +enum psu_index +{ + s9230_psu1, + s9230_psu2 +}; + +/* + * display power good attribute + */ +static ssize_t +show_psu_pg(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s9230_psu_data *data = s9230_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuPG; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + +/* + * display power absent attribute + */ +static ssize_t +show_psu_abs(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s9230_psu_data *data = s9230_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuABS; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + + +/* + * sysfs attributes for psu + */ +static DEVICE_ATTR(psu_pg, S_IRUGO, show_psu_pg, NULL); +static DEVICE_ATTR(psu_abs, S_IRUGO, show_psu_abs, NULL); +static DEVICE_ATTR(psu_eeprom, S_IRUGO, show_psu_eeprom, NULL); + +static struct attribute *s9230_psu_attributes[] = { + &dev_attr_psu_pg.attr, + &dev_attr_psu_abs.attr, + &dev_attr_psu_eeprom.attr, + NULL +}; + +/* + * display psu eeprom content + */ +static ssize_t +show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct s9230_psu_data *data = s9230_psu_update_eeprom(dev); + + memcpy(buf, (char *)data->eeprom, EEPROM_SZ); + return EEPROM_SZ; +} + +static const struct attribute_group s9230_psu_group = { + .attrs = s9230_psu_attributes, +}; + +/* + * check gpio expander is accessible + */ +static int +pca9555_detect(struct i2c_client *client) +{ + if (i2c_smbus_read_byte_data(client, REG_PORT0_DIR) < 0) { + return -ENODEV; + } + + return 0; +} + +/* + * client address init + */ +static void +i2c_devices_client_address_init(struct i2c_client *client) +{ + pca9555_client = *client; + pca9555_client.addr = 0x25; +} + +static int +s9230_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct s9230_psu_data *data; + int status, err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct s9230_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct s9230_psu_data)); + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->lock); + + i2c_devices_client_address_init(client); + + err = pca9555_detect(&pca9555_client); + if (err) { + return err; + } + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &s9230_psu_group); + if (status) { + goto exit_free; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &s9230_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int +s9230_psu_remove(struct i2c_client *client) +{ + struct s9230_psu_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &s9230_psu_group); + kfree(data); + + return 0; +} + + +/* + * psu eeprom read utility + */ +static int +s9230_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len) +{ + int i=0, ret=0; + int blk_max = 32; //max block read size + + /* read eeprom, 32 * 8 = 256 bytes */ + for (i=0; i < EEPROM_SZ/blk_max; i++) { + ret = i2c_smbus_read_i2c_block_data(client, (i*blk_max), blk_max, + data + (i*blk_max)); + if (ret < 0) { + return ret; + } + } + return ret; +} + +/* + * update eeprom content + */ +static struct s9230_psu_data +*s9230_psu_update_eeprom(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s9230_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + if (time_after(jiffies, data->last_updated + 300 * HZ) + || !data->valid) { + + /* Read psu status */ + + status = i2c_smbus_read_word_data(&(pca9555_client), REG_PORT0_IN); + data->status = status; + + /*read psu status from io expander*/ + + if (data->index == s9230_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (status >> psu_pwrok) & 0x1; + data->psuABS = (status >> psu_prsnt_l) & 0x1; + + /* Read eeprom */ + if (!data->psuABS) { + //clear local eeprom data + memset(data->eeprom, 0, EEPROM_SZ); + + //read eeprom + status = s9230_psu_read_block(client, 0, data->eeprom, + ARRAY_SIZE(data->eeprom)); + + if (status < 0) { + memset(data->eeprom, 0, EEPROM_SZ); + dev_err(&client->dev, "Read eeprom failed, status=(%d)\n", status); + } else { + data->valid = 1; + } + } else { + memset(data->eeprom, 0, EEPROM_SZ); + } + data->last_updated = jiffies; + } + + mutex_unlock(&data->lock); + + return data; +} + +/* + * update psu status + */ +static struct s9230_psu_data +*s9230_psu_update_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s9230_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + /* Read psu status */ + + status = i2c_smbus_read_word_data(&(pca9555_client), REG_PORT0_IN); + data->status = status; + + /*read psu status from io expander*/ + + if (data->index == s9230_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (status >> psu_pwrok) & 0x1; + data->psuABS = (status >> psu_prsnt_l) & 0x1; + + mutex_unlock(&data->lock); + + return data; +} + +static const struct i2c_device_id s9230_psu_id[] = { + { "psu1", s9230_psu1 }, + { "psu2", s9230_psu2 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, s9230_psu_id); + +static struct i2c_driver s9230_psu_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = s9230_psu_probe, + .remove = s9230_psu_remove, + .id_table = s9230_psu_id, + .address_list = normal_i2c, +}; + +static int __init s9230_psu_init(void) +{ + return i2c_add_driver(&s9230_psu_driver); +} + +static void __exit s9230_psu_exit(void) +{ + i2c_del_driver(&s9230_psu_driver); +} + +module_init(s9230_psu_init); +module_exit(s9230_psu_exit); + +MODULE_AUTHOR("Jason Tsai "); +MODULE_DESCRIPTION("S9230-64X psu driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/service/qsfp-monitor.service b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/service/qsfp-monitor.service new file mode 100644 index 000000000000..cf4a6a8ad41e --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s9230-64x-monitor.service +After=s9230-64x-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/service/s9230-64x-monitor.service b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/service/s9230-64x-monitor.service new file mode 100644 index 000000000000..5caf968e659a --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/service/s9230-64x-monitor.service @@ -0,0 +1,19 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +Wants=qsfp-monitor.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s9230_64x_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/i2c_utils.sh b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/i2c_utils.sh new file mode 100755 index 000000000000..e899e64a7c3b --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/i2c_utils.sh @@ -0,0 +1,1850 @@ +#!/bin/bash + +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# trun on for more debug output +#DEBUG="on" + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +EXEC_FUNC=${1} +COLOR_LED=${2} +QSFP_PORT=${2} +SFP_PORT=${2} +QSFP_ACTION=${2} +SFP_ACTION=${2} +MB_EEPROM_ACTION=${2} +TARGET_10G_MUX=${2} +ONOFF_LED=${3} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +NUM_I801_DEVICE=0 + +# PCA9548#0 0x70 +NUM_MUX_9548_0_CH0=$(( ${NUM_I801_DEVICE} + 1 )) # CPLD1 +NUM_MUX_9548_0_CH1=$(( ${NUM_I801_DEVICE} + 2 )) # CPLD2 +NUM_MUX_9548_0_CH2=$(( ${NUM_I801_DEVICE} + 3 )) # CPLD3 +NUM_MUX_9548_0_CH3=$(( ${NUM_I801_DEVICE} + 4 )) # CPLD4 +NUM_MUX_9548_0_CH4=$(( ${NUM_I801_DEVICE} + 5 )) # CPLD5 +NUM_MUX_9548_0_CH5=$(( ${NUM_I801_DEVICE} + 6 )) # LM75_1 LM75_2 +NUM_MUX_9548_0_CH6=$(( ${NUM_I801_DEVICE} + 7 )) # LM75_3 LM75_4 + +# PCA9548#1 0x73 +NUM_MUX_9548_1_CH0=$(( ${NUM_I801_DEVICE} + 9 )) # UCD9090 +NUM_MUX_9548_1_CH1=$(( ${NUM_I801_DEVICE} + 10 )) # PCA9539 0x76 for FP LED & HW ID +NUM_MUX_9548_1_CH2=$(( ${NUM_I801_DEVICE} + 11 )) # PCA9539 0x76 for SYS control +NUM_MUX_9548_1_CH4=$(( ${NUM_I801_DEVICE} + 13 )) # 10G Mux +NUM_MUX_9548_1_CH7=$(( ${NUM_I801_DEVICE} + 16 )) # HWM & TMP75 on BMC + +# PCA9546#0 0X72 +NUM_MUX_9546_0_CH0=$(( ${NUM_I801_DEVICE} + 17 )) # PSU1 0x58 +NUM_MUX_9546_0_CH1=$(( ${NUM_I801_DEVICE} + 18 )) # PSU2 0x58 +NUM_MUX_9546_0_CH2=$(( ${NUM_I801_DEVICE} + 19 )) # PCA9548#2 0x71 +NUM_MUX_9546_0_CH3=$(( ${NUM_I801_DEVICE} + 20 )) # PCA9546#1 0x71 + +# PCA9546#1 0X71 +NUM_MUX_9546_1_CH0=$(( ${NUM_I801_DEVICE} + 21 )) # SFP0 EEPROM 0x50 +NUM_MUX_9546_1_CH1=$(( ${NUM_I801_DEVICE} + 22 )) # SFP1 EEPROM 0x50 + +# PCA9548#2 0X71 +NUM_MUX_9548_2_CH0=$(( ${NUM_I801_DEVICE} + 25 )) # PCA9548#3 0x74 +NUM_MUX_9548_2_CH1=$(( ${NUM_I801_DEVICE} + 26 )) # PCA9548#4 0x74 +NUM_MUX_9548_2_CH2=$(( ${NUM_I801_DEVICE} + 27 )) # PCA9548#5 0x74 +NUM_MUX_9548_2_CH3=$(( ${NUM_I801_DEVICE} + 28 )) # PCA9548#6 0x74 +NUM_MUX_9548_2_CH4=$(( ${NUM_I801_DEVICE} + 29 )) # PCA9548#7 0x74 +NUM_MUX_9548_2_CH5=$(( ${NUM_I801_DEVICE} + 30 )) # PCA9548#8 0x74 +NUM_MUX_9548_2_CH6=$(( ${NUM_I801_DEVICE} + 31 )) # PCA9548#9 0x74 +NUM_MUX_9548_2_CH7=$(( ${NUM_I801_DEVICE} + 32 )) # PCA9548#10 0x74 + +# PCA9548#3~10 0X74 +NUM_MUX_9548_3_CH0=$(( ${NUM_I801_DEVICE} + 33 )) # QSFP 0 EEPROM +NUM_MUX_9548_4_CH0=$(( ${NUM_I801_DEVICE} + 41 )) # QSFP 8 EEPROM +NUM_MUX_9548_5_CH0=$(( ${NUM_I801_DEVICE} + 49 )) # QSFP 16 EEPROM +NUM_MUX_9548_6_CH0=$(( ${NUM_I801_DEVICE} + 57 )) # QSFP 24 EEPROM +NUM_MUX_9548_7_CH0=$(( ${NUM_I801_DEVICE} + 65 )) # QSFP 32 EEPROM +NUM_MUX_9548_8_CH0=$(( ${NUM_I801_DEVICE} + 73 )) # QSFP 40 EEPROM +NUM_MUX_9548_9_CH0=$(( ${NUM_I801_DEVICE} + 81 )) # QSFP 48 EEPROM +NUM_MUX_9548_10_CH0=$(( ${NUM_I801_DEVICE} + 89 )) # QSFP 56 EEPROM + +# MUX Alias +I2C_BUS_MAIN=${NUM_I801_DEVICE} +I2C_BUS_HWM=${NUM_MUX_9548_1_CH7} +I2C_BUS_FAN_STATUS=${I2C_BUS_MAIN} +I2C_BUS_SYS_LED=${NUM_MUX_9548_1_CH1} +I2C_BUS_HW_ID=${NUM_MUX_9548_1_CH1} +I2C_BUS_BMC_HW_ID=${I2C_BUS_MAIN} +I2C_BUS_PSU_STAT=${I2C_BUS_MAIN} +I2C_BUS_FANTRAY_LED=${I2C_BUS_MAIN} +I2C_BUS_MB_EEPROM=${I2C_BUS_MAIN} +I2C_BUS_CB_EEPROM=${I2C_BUS_MAIN} +I2C_BUS_PSU1_EEPROM=${NUM_MUX_9546_0_CH1} +I2C_BUS_PSU2_EEPROM=${NUM_MUX_9546_0_CH0} +I2C_BUS_CPLD1=${NUM_MUX_9548_0_CH0} +I2C_BUS_CPLD2=${NUM_MUX_9548_0_CH1} +I2C_BUS_CPLD3=${NUM_MUX_9548_0_CH2} +I2C_BUS_CPLD4=${NUM_MUX_9548_0_CH3} +I2C_BUS_CPLD5=${NUM_MUX_9548_0_CH4} +I2C_BUS_10GMUX=${NUM_MUX_9548_1_CH4} + +# I2C BUS path +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +# TODO: need to verify HWM deivce path after board ready +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon7" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_MUX_9548_0_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH0}" +PATH_MUX_9548_0_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH1}" +PATH_MUX_9548_0_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH2}" +PATH_MUX_9548_0_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH3}" +PATH_MUX_9548_0_CH4="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH4}" +PATH_MUX_9548_0_CH5="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH5}" +PATH_MUX_9548_0_CH6="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH6}" +PATH_MUX_9548_1_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH0}" +PATH_MUX_9548_1_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH1}" +PATH_MUX_9548_1_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH2}" +PATH_MUX_9548_1_CH7="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH7}" +PATH_MUX_9546_0_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_0_CH0}" +PATH_MUX_9546_0_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_0_CH1}" +PATH_MUX_9546_0_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_0_CH2}" +PATH_MUX_9546_0_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_0_CH3}" +PATH_MUX_9546_1_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_1_CH0}" +PATH_MUX_9546_1_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_1_CH1}" +PATH_MUX_9548_2_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH0}" +PATH_MUX_9548_2_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH1}" +PATH_MUX_9548_2_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH2}" +PATH_MUX_9548_2_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH3}" +PATH_MUX_9548_2_CH4="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH4}" +PATH_MUX_9548_2_CH5="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH5}" +PATH_MUX_9548_2_CH6="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH6}" +PATH_MUX_9548_2_CH7="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH7}" +PATH_MUX_9548_3_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_3_CH0}" +PATH_MUX_9548_4_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_4_CH0}" +PATH_MUX_9548_5_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_5_CH0}" +PATH_MUX_9548_6_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_6_CH0}" +PATH_MUX_9548_7_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_7_CH0}" +PATH_MUX_9548_8_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_8_CH0}" +PATH_MUX_9548_9_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_9_CH0}" +PATH_MUX_9548_10_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_10_CH0}" +PATH_CPLD1_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD1}" +PATH_CPLD2_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD2}" +PATH_CPLD3_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD3}" +PATH_CPLD4_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD4}" +PATH_CPLD5_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD5}" +PATH_10GMUX=${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_10GMUX} + + +# I2C Address +### I2C MUX +I2C_ADDR_MUX_9548_0=0x70 +I2C_ADDR_MUX_9548_1=0x73 +I2C_ADDR_MUX_9546_0=0x72 +I2C_ADDR_MUX_9546_1=0x71 +I2C_ADDR_MUX_9548_2=0x71 +I2C_ADDR_MUX_9548_3=0x74 +I2C_ADDR_MUX_9548_4=0x74 +I2C_ADDR_MUX_9548_5=0x74 +I2C_ADDR_MUX_9548_6=0x74 +I2C_ADDR_MUX_9548_7=0x74 +I2C_ADDR_MUX_9548_8=0x74 +I2C_ADDR_MUX_9548_9=0x74 +I2C_ADDR_MUX_9548_10=0x74 + +### GPIO Expander +I2C_ADDR_MUX_9539_0=0x76 # LED & HW ID +I2C_ADDR_MUX_9539_1=0x76 # SYS config +I2C_ADDR_MUX_9539_2=0x77 # on CPU board, STATUS and ERR from CPLD +I2C_ADDR_MUX_9555_0=0x20 # on FAN board, fan status and led config +I2C_ADDR_MUX_9555_1=0x24 # on BMC board, INT and HW ID +I2C_ADDR_MUX_9555_2=0x25 # on BMC board, PSU status +I2C_ADDR_MUX_9555_3=0x26 # on BMC board, RST and SEL +I2C_ADDR_MUX_9555_3=0x26 # on BMC board, RST and SEL + + +### peripheral +I2C_ADDR_MB_EEPROM=0x55 # on main board +I2C_ADDR_CB_EEPROM=0x51 # on cpu board +I2C_ADDR_UCD9090=0x34 +I2C_ADDR_W83795=0x2F +I2C_ADDR_PSU1_EEPROM=0x50 +I2C_ADDR_PSU2_EEPROM=0x50 +I2C_ADDR_LM75_1=0x4D # Rear Panel +I2C_ADDR_LM75_2=0x4E # Rear MAC +I2C_ADDR_LM75_3=0x4D # Front Panel +I2C_ADDR_LM75_4=0x4E # Front MAC +I2C_ADDR_TMP75_CB=0x4F # on cpu board +I2C_ADDR_TMP75_BB=0x4A # on bmc board +I2C_ADDR_QSFP_EEPROM=0x50 +I2C_ADDR_SFP_EEPROM=0x50 +I2C_ADDR_CPLD=0x33 +I2C_ADDR_10GMUX=0x67 + +#sysfs +PATH_SYSFS_PSU1="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU1_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU1_EEPROM)" +PATH_SYSFS_PSU2="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU2_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU2_EEPROM)" + +#ACTIVE LOW enable flag +ACTIVE_LOW_EN=1 +ACTIVE_HIGH_EN=0 +#GPIO Direction In/Out +DIR_IN=in +DIR_OUT=out + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +# IO expander register +# direction +REG_PORT0_DIR=6 +REG_PORT1_DIR=7 +# polarity +REG_PORT0_POL=4 +REG_PORT1_POL=5 +# output +REG_PORT0_OUT=2 +REG_PORT1_OUT=3 +# input +REG_PORT0_IN=0 +REG_PORT1_IN=1 + +# qsfp port number range +MIN_QSFP_PORT_NUM=1 +MAX_QSFP_PORT_NUM=64 + +# sfp+ port number range +MIN_SFP_PORT_NUM=1 +MAX_SFP_PORT_NUM=2 + +# CPLD access +# port status +CPLD_QSFP_STATUS_KEY=cpld_qsfp_port_status +CPLD_SFP_STATUS_KEY=cpld_sfp_port_status +# bit define +CPLD_QSFP_STATUS_ABS_BIT=1 +CPLD_SFP_STATUS_PRES_BIT=0 + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_deinit" + echo " : ${0} i2c_fan_speed_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_led_test" + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_cb_eeprom_get" + #echo " : ${0} i2c_eeprom_sync" + echo " : ${0} i2c_qsfp_eeprom_get [${MIN_QSFP_PORT_NUM}-${MAX_QSFP_PORT_NUM}]" + echo " : ${0} i2c_sfp_eeprom_get [${MIN_SFP_PORT_NUM}-${MAX_SFP_PORT_NUM}]" + echo " : ${0} i2c_qsfp_eeprom_init new|delete" + echo " : ${0} i2c_sfp_eeprom_init new|delete" + echo " : ${0} i2c_mb_eeprom_init new|delete" + echo " : ${0} i2c_cb_eeprom_init new|delete" + echo " : ${0} i2c_qsfp_status_get [${MIN_QSFP_PORT_NUM}-${MAX_QSFP_PORT_NUM}]" + echo " : ${0} i2c_sfp_status_get [${MIN_SFP_PORT_NUM}-${MAX_SFP_PORT_NUM}]" + echo " : ${0} i2c_qsfp_type_get [${MIN_QSFP_PORT_NUM}-${MAX_QSFP_PORT_NUM}]" + echo " : ${0} i2c_sfp_type_get [${MIN_SFP_PORT_NUM}-${MAX_SFP_PORT_NUM}]" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_bmc_board_type_get" + echo " : ${0} i2c_cpld_version" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_sys_led green|amber" + echo " : ${0} i2c_fan_led green|amber|off" + echo " : ${0} i2c_psu1_led green|amber|off" + echo " : ${0} i2c_psu2_led green|amber|off" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" + echo " : ${0} i2c_10g_mux cpu|fp" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + local i + for i in {1..5}; + do + eval "${*}" && break || echo "retry"; sleep 1; + done +} + +#logical(front panel) to physical (falcon core) port mapping +function _port_logic2phy { + + local logic_port=$1 + local phy_port=0 + + if (( $logic_port >=1 && $logic_port <= 32 )) ; then + phy_port=$(( (logic_port-1)/2*4 + (logic_port-1)%2 + 1)) + elif (( $logic_port >=33 && $logic_port <= 64 )) ; then + phy_port=$(( (((logic_port-1)%32))/2*4 + (logic_port-1)%2 + 3)) + fi + + echo $phy_port +} + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + #rmmod i2c_ismt + _util_rmmod i2c_i801 + modprobe i2c_i801 + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + # add MUX PCA9548#0 on I801, assume to be i2c-1~8 + if [ ! -e ${PATH_MUX_9548_0_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_0}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_0} already init." + fi + + # add MUX PCA9548#1 on I801, assume to be i2c-9~16 + if [ ! -e ${PATH_MUX_9548_1_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_1}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_1} already init." + fi + + # add MUX PCA9546#0 on I801, assume to be i2c-17~20 + if [ ! -e ${PATH_MUX_9546_0_CH0} ]; then + _retry "echo 'pca9546 ${I2C_ADDR_MUX_9546_0}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9546 ${I2C_ADDR_MUX_9546_0} already init." + fi + + # add MUX PCA9546#1 on PCA9546#0 CH3, assume to be i2c-21~24 + if [ ! -e ${PATH_MUX_9546_1_CH0} ]; then + _retry "echo 'pca9546 ${I2C_ADDR_MUX_9546_1}' > ${PATH_MUX_9546_0_CH3}/new_device" + else + echo "pca9546 ${I2C_ADDR_MUX_9546_1} already init." + fi + + # add MUX PCA9548#2 on PCA9546#0 CH2, assume to be i2c-25~32 + if [ ! -e ${PATH_MUX_9548_2_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_2}' > ${PATH_MUX_9546_0_CH2}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_2} already init." + fi + + # add MUX PCA9548#3 on PCA9548#2 CH0, assume to be i2c-33~40 + if [ ! -e ${PATH_MUX_9548_3_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_3}' > ${PATH_MUX_9548_2_CH0}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_3} already init." + fi + + # add MUX PCA9548#4 on PCA9548#2 CH1, assume to be i2c-41~48 + if [ ! -e ${PATH_MUX_9548_4_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_4}' > ${PATH_MUX_9548_2_CH1}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_4} already init." + fi + + # add MUX PCA9548#5 on PCA9548#2 CH2, assume to be i2c-49~56 + if [ ! -e ${PATH_MUX_9548_5_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_5}' > ${PATH_MUX_9548_2_CH2}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_5} already init." + fi + + # add MUX PCA9548#6 on PCA9548#2 CH3, assume to be i2c-57~64 + if [ ! -e ${PATH_MUX_9548_6_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_6}' > ${PATH_MUX_9548_2_CH3}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_6} already init." + fi + + # add MUX PCA9548#7 on PCA9548#2 CH4, assume to be i2c-65~72 + if [ ! -e ${PATH_MUX_9548_7_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_7}' > ${PATH_MUX_9548_2_CH4}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_7} already init." + fi + + # add MUX PCA9548#8 on PCA9548#2 CH5, assume to be i2c-73~80 + if [ ! -e ${PATH_MUX_9548_8_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_8}' > ${PATH_MUX_9548_2_CH5}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_8} already init." + fi + + # add MUX PCA9548#9 on PCA9548#2 CH6, assume to be i2c-81~88 + if [ ! -e ${PATH_MUX_9548_9_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_9}' > ${PATH_MUX_9548_2_CH6}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_9} already init." + fi + + # add MUX PCA9548#10 on PCA9548#2 CH7, assume to be i2c-89~96 + if [ ! -e ${PATH_MUX_9548_10_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_10}' > ${PATH_MUX_9548_2_CH7}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_10} already init." + fi + + _i2c_hwm_init + _util_rmmod eeprom + modprobe eeprom_mb + modprobe gpio-pca953x + _i2c_io_exp_init + _i2c_sensors_init + _i2c_cpld_init + _i2c_psu_init + + _i2c_qsfp_eeprom_init "new" + _i2c_sfp_eeprom_init "new" + _i2c_mb_eeprom_init "new" + _i2c_cb_eeprom_init "new" + _i2c_fan_speed_init + _i2c_led_psu_status_set + _i2c_led_fan_status_set + + # trun on sys led + echo "led_sys setup..." + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + + _config_rmem +} + +#I2C Deinit +function _i2c_deinit { + echo "i2c deinit..." + for mod in coretemp jc42 w83795 eeprom eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_i801 ingrasys_s9230_64x_psu; + do + _util_rmmod $mod + done + echo "Done" +} + +function _i2c_cpld_init { + echo "CPLD init..." + _util_rmmod ingrasys_s9230_64x_i2c_cpld + modprobe ingrasys_s9230_64x_i2c_cpld + + # add cpld 1~5 to sysfs + for i in {1..5}; + do + local cpld_bus="I2C_BUS_CPLD${i}" + local cpld_path="PATH_CPLD${i}_DEVICE" + dev_path="${PATH_SYS_I2C_DEVICES}/${!cpld_bus}-$(printf "%04x" ${I2C_ADDR_CPLD})" + if ! [ -L ${dev_path} ]; then + echo "ingrasys_cpld${i} ${I2C_ADDR_CPLD}" > ${!cpld_path}/new_device + else + echo "${dev_path} already exist" + fi + done + + echo "Done" +} + +function _i2c_sensors_init { + echo "SENSORS init..." + local dev_path + # to make sure hwmon index in sysfs as expected, + # need to remove kernel module and then probe them in expected order + # remove all sensors kernel module + _util_rmmod coretemp + _util_rmmod jc42 + _util_rmmod w83795 + # probe coretemp kernel module + modprobe coretemp + # probe hwmon kernel module + modprobe w83795 + # add lm75 to sysfs + ####Main board thermal + ####lm75_1 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH5}-$(printf "%04x" ${I2C_ADDR_LM75_1})" + if ! [ -L ${dev_path} ]; then + echo "lm75 ${I2C_ADDR_LM75_1}" > ${PATH_MUX_9548_0_CH5}/new_device # hwmon1 + else + echo "${dev_path} already exist" + fi + ####lm75_2 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH5}-$(printf "%04x" ${I2C_ADDR_LM75_2})" + if ! [ -L ${dev_path} ]; then + echo "lm75 ${I2C_ADDR_LM75_2}" > ${PATH_MUX_9548_0_CH5}/new_device #hwmon2 + else + echo "${dev_path} already exist" + fi + ####lm75_3 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH6}-$(printf "%04x" ${I2C_ADDR_LM75_3})" + if ! [ -L ${dev_path} ]; then + echo "lm75 ${I2C_ADDR_LM75_1}" > ${PATH_MUX_9548_0_CH6}/new_device # hwmon3 + else + echo "${dev_path} already exist" + fi + ####lm75_4 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH6}-$(printf "%04x" ${I2C_ADDR_LM75_4})" + if ! [ -L ${dev_path} ]; then + echo "lm75 ${I2C_ADDR_LM75_4}" > ${PATH_MUX_9548_0_CH6}/new_device #hwmon4 + else + echo "${dev_path} already exist" + fi + ####BMC board thermal + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_1_CH7}-$(printf "%04x" ${I2C_ADDR_TMP75_BB})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_BB}" > ${PATH_MUX_9548_1_CH7}/new_device #hwmon5 + else + echo "${dev_path} already exist" + fi + ####CPU board thermal + dev_path="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MAIN}-$(printf "%04x" ${I2C_ADDR_TMP75_CB})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_CB}" > ${PATH_I801_DEVICE}/new_device #hwmon6 + else + echo "${dev_path} already exist" + fi + # add w83795 to sysfs + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_1_CH7}-$(printf "%04x" ${I2C_ADDR_W83795})" + if ! [ -L ${dev_path} ]; then + echo "w83795adg ${I2C_ADDR_W83795}" > ${PATH_MUX_9548_1_CH7}/new_device #hwmon7 + else + echo "${dev_path} already exist" + fi + + # probe jc42 kernel module + modprobe jc42 + + echo "Done" +} + +#FAN Speed Init +function _i2c_fan_speed_init { + echo -n "FAN SPEED INIT..." + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + # init fan speed + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + echo "SUCCESS" + else + echo "FAIL" + fi +} + +# HWM init +function _i2c_hwm_init { + echo "HWM INIT..." + # select bank0 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80 + # SW reset, Disable monitor + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x01 0x9C + # disable TR5/TR6 DTS + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x04 0x0 + # enable FANIN1~8 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x06 0xFF + # disable FANIN9~14 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x07 0x00 + # CLKIN clock frequency set as 48Mhz + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x01 0x1C + # select bank 2 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x82 + # set PWM mode in FOMC + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x0F 0x00 + # set 25KHz fan output frequency in F1OPFP&F2OPFP + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x18 0x84 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x19 0x84 +} + +#IO Expander Init +function _i2c_io_exp_init { + echo "=========================================================" + echo "# Description: I2C IO Expender Init" + echo "=========================================================" + + # need to init BMC io expander first due to some io expander are reset default + echo "Init BMC INT & HW ID IO Expander" + # all input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_1} ${REG_PORT0_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_1} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_1} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_1} ${REG_PORT1_POL} 0x00 + + echo "Init BMC PSU status IO Expander" + # PWRON default 0 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT0_OUT} 0x00 + # default 0 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT1_OUT} 0x00 + # I/O 0.2 0.5 output(PWRON), rest input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT0_DIR} 0xDB + # I/O 1.0~1.1 input, 1.2~1.4 output (1.5~1.7 not enable) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT1_DIR} 0xE3 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT1_POL} 0x00 + + echo "Init BMC RST and SEL IO Expander" + # RST default is 1 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT0_OUT} 0x3F + # SEL default is 0 (HOST), EN default is 1 (ACTIVE_HIGH) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT1_OUT} 0x1F + # I/O 0.0~0.5 output, 0.6~0.7 not use + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT0_DIR} 0xC0 + # all output + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT1_DIR} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT1_POL} 0x00 + + echo "Init System LED & HW ID IO Expander" + # I/O_0.x for System LED default 0, I/O_1.x for HW ID + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_OUT} 0x00 + # System LED => all output + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_DIR} 0x00 + # HW ID => all input + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT1_POL} 0x00 + + echo "Init FAN Board Status IO Expander" + # LED_G_H set to 1, LED_Y_G set to 0 (ACTIVE_HIGH) + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT0_OUT} 0x11 + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT1_OUT} 0x11 + # DIR/ABS is input, LED_Y/LED_G is output + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT0_DIR} 0xCC + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT1_DIR} 0xCC + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT1_POL} 0x00 + + echo "Init System SEL and RST IO Expander" + # RST 0.0~0.3 default 1 (ACTIVE low), rest default 0 + # SEL set to value 0 (host) + # LED_CLR set to 0 will clear all switch LED bitmap, set to 1 here + _util_i2cset -y -r ${NUM_MUX_9548_1_CH2} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_OUT} 0x0F + # RST 1.6~1.7 default 1 (ACTIVE low), INT 1.0~1.4 default 1 (ACTIVE low) + _util_i2cset -y -r ${NUM_MUX_9548_1_CH2} ${I2C_ADDR_MUX_9539_1} ${REG_PORT1_OUT} 0xDF + # all output, but MAC_RST_L 0.0 need to set as input to prevent reboot issue + _util_i2cset -y -r ${NUM_MUX_9548_1_CH2} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_DIR} 0x09 + # RST 1.5 !~ 1.7 output, rest are input + _util_i2cset -y -r ${NUM_MUX_9548_1_CH2} ${I2C_ADDR_MUX_9539_1} ${REG_PORT1_DIR} 0x1F + _util_i2cset -y -r ${NUM_MUX_9548_1_CH2} ${I2C_ADDR_MUX_9539_1} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9548_1_CH2} ${I2C_ADDR_MUX_9539_1} ${REG_PORT1_POL} 0x00 + + echo "Init CPU CPLD IO Expander" + # all input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_DIR} 0xFF + # all input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_POL} 0x00 +} + +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "FAN Tray Status Setup" + #FAN Status get + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + + # check if io expander for fan tray exist + result=`i2cget -y ${I2C_BUS_FANTRAY_LED} ${I2C_ADDR_MUX_9555_0} ${REG_PORT0_IN} 2>/dev/null` + err_code=$? + if [ "$err_code" != "0" ]; then + echo "fan tray not exist!" + return + fi + + for FAN_TRAY in {1..4}; + do + FAN_ALARM="FAN${FAN_TRAY}_ALARM" + if [ "${!FAN_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="off" + _i2c_fan_tray_led + + echo "set [FAN TRAY ${FAN_TRAY}] [Green]=on [Amber]=off" + else + COLOR_LED="green" + ONOFF_LED="off" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_fan_tray_led + + echo "set [FAN TRAY ${FAN_TRAY}] [Green]=off [Amber]=on" + fi + done +} + +#Set FAN LED +function _i2c_led_fan_status_set { + echo "FAN Status Setup" + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + + echo "led_fan setup..." + # all fan ok + if [ "${FAN1_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ]; then + COLOR_LED="green" + echo "${COLOR_LED}" + _i2c_fan_led + # all fan fail + elif [ "${FAN1_ALARM}" == "1" ] \ + && [ "${FAN3_ALARM}" == "1" ] \ + && [ "${FAN5_ALARM}" == "1" ] \ + && [ "${FAN7_ALARM}" == "1" ] ; then + COLOR_LED="amber" + echo "${COLOR_LED}" + _i2c_fan_led + # partial fan fail + else + COLOR_LED="amber" + echo "${COLOR_LED}" + _i2c_fan_led + fi +} + +#Set Power Supply LED +function _i2c_led_psu_status_set { + echo "PSU LED Status Setup" + + #PSU Status set + _i2c_psu_status + + #PSU1 Status + echo "led_psu1 setup..." + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + echo "${COLOR_LED}" + _i2c_psu1_led + else + COLOR_LED="amber" + echo "${COLOR_LED}" + _i2c_psu1_led + fi + else + COLOR_LED="off" + echo "${COLOR_LED}" + _i2c_psu1_led + fi + + #PSU2 Status + echo "led_psu2 setup..." + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + echo "${COLOR_LED}" + _i2c_psu2_led + else + COLOR_LED="amber" + echo "${COLOR_LED}" + _i2c_psu2_led + fi + else + COLOR_LED="off" + echo "${COLOR_LED}" + _i2c_psu2_led + fi +} + +#LED Test +function _i2c_led_test { + echo "=========================================================" + echo "# Description: I2C SYSTEM LED TEST..." + echo "=========================================================" + local output_reg=${REG_PORT0_OUT} + local mask=0xFF + local value=0xFF + + #sys led (green) + # set sys_led_g (0.7) = 1 + mask=0x80 + value=0x80 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check SYS LED green light and Press [Enter] key to continue...' + #sys led (amber) + # set sys_led_g (0.7) = 0 + mask=0x80 + value=0x00 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check SYS LED amber light and Press [Enter] key to continue...' + + #FAN led (green) + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 0 + mask=0x60 + value=0x60 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check FAN LED green light and Press [Enter] key to continue...' + #FAN led (amber) + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 1 + mask=0x60 + value=0x40 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check FAN LED amber light and Press [Enter] key to continue...' + + #PSU1 led (green) + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 0 + mask=0x18 + value=0x18 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check PSU1 LED green light and Press [Enter] key to continue...' + #PSU1 led (amber) + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 1 + mask=0x18 + value=0x10 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check PSU1 LED amber light and Press [Enter] key to continue...' + + #PSU2 led (green) + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 0 + mask=0x06 + value=0x06 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check PSU2 LED green light and Press [Enter] key to continue...' + #PSU2 led (amber) + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 1 + mask=0x06 + value=0x04 + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check PSU2 LED amber light and Press [Enter] key to continue...' + + #Turn OFF All LED (can't trun off system led) + # set set fan_led_en (0.6), psu1_pwr_ok_oe (0.4), psu0_pwr_ok_oe (0.2) = 0 + mask=0xFF + value=$((2#00000011)) + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + _pause 'Check turn off all LEDs (exclude SYS LED) and Press [Enter] key to continue...' + + # restore sys led + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led +} + +#Set QSFP Port cpld variable +function _qsfp_cpld_var_set { + local port=$1 + local reg_port_base + local reg_port_shift + if [[ $1 -le 12 && $1 -ge 1 ]]; then + cpld_index=1 + reg_port_base=0 + elif [[ $1 -le 25 && $1 -ge 13 ]]; then + cpld_index=2 + reg_port_base=12 + elif [[ $1 -le 38 && $1 -ge 26 ]]; then + cpld_index=3 + reg_port_base=25 + elif [[ $1 -le 51 && $1 -ge 39 ]]; then + cpld_index=4 + reg_port_base=38 + elif [[ $1 -le 64 && $1 -ge 52 ]]; then + cpld_index=5 + reg_port_base=51 + else + echo "invalid port number" + fi + + cpld_port_index=$(( $port - $reg_port_base )) +} + +#Set QSFP Port eeporm variable +function _qsfp_eeprom_var_set { + local port=$1 + local eeprombusbase + local eeprombusshift + # port 1 => zqsfp0 + # port 2 => zqsfp1 + # ... + local port_group=$(( ($port - 1) / 8 )) + + case ${port_group} in + 0) + eeprombusbase=${NUM_MUX_9548_3_CH0} + ;; + 1) + eeprombusbase=${NUM_MUX_9548_4_CH0} + ;; + 2) + eeprombusbase=${NUM_MUX_9548_5_CH0} + ;; + 3) + eeprombusbase=${NUM_MUX_9548_6_CH0} + ;; + 4) + eeprombusbase=${NUM_MUX_9548_7_CH0} + ;; + 5) + eeprombusbase=${NUM_MUX_9548_8_CH0} + ;; + 6) + eeprombusbase=${NUM_MUX_9548_9_CH0} + ;; + 7) + eeprombusbase=${NUM_MUX_9548_10_CH0} + ;; + *) + ;; + esac + + eeprombusshift=$(( (${port} - 1) % 8)) + eepromBus=$(( ${eeprombusbase} + ${eeprombusshift} )) + eepromAddr=${I2C_ADDR_QSFP_EEPROM} +} + + +#Set SFP Port cpld variable +function _sfp_cpld_var_set { + local port=$1 + case ${port} in + 1) + cpld_index=1 + ;; + 2) + cpld_index=2 + ;; + *) + ;; + esac +} + +#Set QSFP Port eeporm variable +function _sfp_eeprom_var_set { + local port=$1 + + case ${port} in + 1) + eepromBus=${NUM_MUX_9546_1_CH0} + ;; + 2) + eepromBus=${NUM_MUX_9546_1_CH1} + ;; + *) + ;; + esac + + eepromAddr=${I2C_ADDR_SFP_EEPROM} +} + +#Get QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + local phy_port=0 + + #get physical port + phy_port=$(_port_logic2phy $QSFP_PORT) + + # input parameter validation + _util_input_check "${QSFP_PORT}" "${MIN_QSFP_PORT_NUM}" "${MAX_QSFP_PORT_NUM}" + + _qsfp_eeprom_var_set ${phy_port} + + _util_get_qsfp_abs + + if [ $status = 0 ]; then + exit + fi + + + cat ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init QSFP EEPROM +function _i2c_qsfp_eeprom_init { + echo "QSFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-64 ports EEPROM + local i + for i in {1..64}; + do + _qsfp_eeprom_var_set ${i} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/delete_device + fi + done + echo "Done" +} + +#Get SFP EEPROM Information +function _i2c_sfp_eeprom_get { + + # input parameter validation + _util_input_check "${SFP_PORT}" "${MIN_SFP_PORT_NUM}" "${MAX_SFP_PORT_NUM}" + _util_get_sfp_pres + + if [ $status = 0 ]; then + exit + fi + + _sfp_eeprom_var_set ${SFP_PORT} + + cat ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init SFP EEPROM +function _i2c_sfp_eeprom_init { + echo "SFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-2 sfp+ EEPROM + local i + for i in {1..2}; + do + _sfp_eeprom_var_set ${i} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/delete_device + fi + done + echo "Done" +} + +#Init Main Board EEPROM +function _i2c_mb_eeprom_init { + echo -n "Main Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init mb EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then + echo "mb_eeprom ${I2C_ADDR_MB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then + echo "$I2C_ADDR_MB_EEPROM" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/delete_device + fi + echo "Done" +} + +#Init CPU Board EEPROM +function _i2c_cb_eeprom_init { + echo -n "CPU Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init cpu EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM) ]; then + echo "mb_eeprom ${I2C_ADDR_CB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CB_EEPROM}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM) ]; then + echo "$I2C_ADDR_CB_EEPROM" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CB_EEPROM}/delete_device + fi + echo "Done" +} + +#Init PSU Kernel Module +function _i2c_psu_init { + echo "=========================================================" + echo "# Description: I2C PSU Init" + echo "=========================================================" + modprobe ingrasys_s9230_64x_psu + + echo "psu1 ${I2C_ADDR_PSU1_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM}/new_device + echo "psu2 ${I2C_ADDR_PSU2_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM}/new_device +} + +#Deinit PSU Kernel Module +function _i2c_psu_deinit { + echo "${I2C_ADDR_PSU1_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM}/delete_device + echo "${I2C_ADDR_PSU2_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM}/delete_device + _util_rmmod ingrasys_s9230_64x_psu +} + +#get QSFP Status +function _i2c_qsfp_status_get { + + # input parameter validation + _util_input_check "${QSFP_PORT}" "${MIN_QSFP_PORT_NUM}" "${MAX_QSFP_PORT_NUM}" + + local stat + _util_get_qsfp_abs + echo "status=$status" +} + +#get QSFP Type +function _i2c_qsfp_type_get { + local phy_port=0 + + phy_port=$(_port_logic2phy ${QSFP_PORT}) + + # input parameter validation + _util_input_check "${QSFP_PORT}" "${MIN_QSFP_PORT_NUM}" "${MAX_QSFP_PORT_NUM}" + + #_qsfp_eeprom_var_set ${QSFP_PORT} + _qsfp_eeprom_var_set ${phy_port} + + #Get QSFP EEPROM info + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +function _i2c_sfp_status_get { + + # input parameter validation + _util_input_check "${SFP_PORT}" "${MIN_SFP_PORT_NUM}" "${MAX_SFP_PORT_NUM}" + + local stat + _util_get_sfp_pres + #status: 0 -> Down, 1 -> Up + if [ $status = 0 ]; then + stat="down" + else + stat="up" + fi + echo "status is $stat" +} + +#get SFP Type +function _i2c_sfp_type_get { + + # input parameter validation + _util_input_check "${SFP_PORT}" "${MIN_SFP_PORT_NUM}" "${MAX_SFP_PORT_NUM}" + + _sfp_eeprom_var_set ${SFP_PORT} + + #Get QSFP EEPROM info + sfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $sfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $sfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $sfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + local eeprom_psu1="" + local eeprom_psu2="" + + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + eeprom_psu1="${PATH_SYSFS_PSU1}/psu_eeprom" + cat ${eeprom_psu1} | hexdump -C + + eeprom_psu2="${PATH_SYSFS_PSU2}/psu_eeprom" + cat ${eeprom_psu2} | hexdump -C +} + +#Get Main Board EEPROM Information +function _i2c_mb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + _i2c_sys_eeprom_get mb +} + +#Get CPU Board EEPROM Information +function _i2c_cb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C CB EEPROM Get..." + echo "=========================================================" + _i2c_sys_eeprom_get cb +} + +#Get system EEPROM Information +##input: "cb" for cpu board, "mb" for main board +function _i2c_sys_eeprom_get { + local eeprom_dev + + if [ "$1" == "cb" ]; then + eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM)/eeprom" + elif [ "$1" == "mb" ]; then + eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom" + else + echo "wrong eeprom type" + return + fi + + # check if eeprom device exist in sysfs + if [ ! -f ${eeprom_dev} ]; then + echo "eeprom device not init" + return + fi + + cat ${eeprom_dev} | hexdump -C + echo "Done" +} + +#sync eeprom content between mb and cb eeprom +function _i2c_eeprom_sync { + echo "=========================================================" + echo "# Description: EEPROM sync..." + echo "=========================================================" + + local mb_eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom" + local cb_eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM)/eeprom" + + # check if eeprom device exist in sysfs + if [[ ! -f ${mb_eeprom_dev} || ! -f ${cb_eeprom_dev} ]]; then + echo "eeprom device not init" + return + fi + + ## check if MB eeprom is empty + if [ ! -z "$(cat ${mb_eeprom_dev} | hexdump -n2 | grep ffff)" ]; then + echo "copy cb eeprom to mb eeprom..." + cat ${cb_eeprom_dev} > ${mb_eeprom_dev} + else + echo "no need to sync" + fi + + echo "Done" +} + +#Set System Status LED +function _i2c_sys_led { + # only green/amber, on/off can't control + if [ "${COLOR_LED}" == "green" ]; then + # set sys_led_g (0.7) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x80 + value=0x80 + elif [ "${COLOR_LED}" == "amber" ]; then + # set sys_led_g (0.7) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x80 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set FAN LED +function _i2c_fan_led { + if [ "${COLOR_LED}" == "green" ]; then + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x60 + elif [ "${COLOR_LED}" == "amber" ]; then + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x40 + elif [ "${COLOR_LED}" == "off" ]; then + # set fan_led_en (0.6) = 0 & fan_led_y (0.5) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set PSU1 LED +function _i2c_psu1_led { + if [ "${COLOR_LED}" == "green" ]; then + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x18 + elif [ "${COLOR_LED}" == "amber" ]; then + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x10 + elif [ "${COLOR_LED}" == "off" ]; then + # set psu1_pwr_ok_oe (0.4) = 0 & psu1_led_y (0.3) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set PSU2 LED +function _i2c_psu2_led { + if [ "${COLOR_LED}" == "green" ]; then + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x06 + elif [ "${COLOR_LED}" == "amber" ]; then + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x04 + elif [ "${COLOR_LED}" == "off" ]; then + # set psu0_pwr_ok_oe (0.2) = 0 & psu0_led_y (0.1) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + + i2cAddr=${I2C_ADDR_MUX_9555_0} + output_reg=${REG_PORT0_OUT} + + case ${FAN_TRAY} in + 1) + output_reg=${REG_PORT0_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 2) + output_reg=${REG_PORT0_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 3) + output_reg=${REG_PORT1_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 4) + output_reg=${REG_PORT1_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + *) + echo "Please input 1~4" + exit + ;; + esac + + # LED PIN value is ACTIVE HIGH + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0xff + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0xff + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "Done" +} + +#Get Board Version and Type +function _i2c_board_type_get { + # read input port 1 value from io expander + input_reg=${REG_PORT1_IN} + boardType=`i2cget -y ${I2C_BUS_HW_ID} ${I2C_ADDR_MUX_9539_0} ${input_reg}` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "MAIN_BOARD BOARD_ID is 0x%02x, HW Rev 0x%02x, Build Rev 0x%02x\n" $boardId $boardHwRev $boardBuildRev +} + +#Get BMC Board Version and Type +function _i2c_bmc_board_type_get { + # read input port 1 value from io expander + input_reg=${REG_PORT1_IN} + boardType=`i2cget -y ${I2C_BUS_BMC_HW_ID} ${I2C_ADDR_MUX_9555_1} ${input_reg}` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "BMC_BOARD BOARD_ID is 0x%02x, HW Rev 0x%02x, Build Rev 0x%02x\n" $boardId $boardHwRev $boardBuildRev +} + +#Get CPLD Version +function _i2c_cpld_version { + echo "=========================================================" + echo "# Description: CPLD Version" + echo "=========================================================" + + for i in {1..5}; + do + local cpld_bus="I2C_BUS_CPLD${i}" + local cpld_path="PATH_CPLD${i}_DEVICE" + local file_path="${PATH_SYS_I2C_DEVICES}/${!cpld_bus}-$(printf "%04x" ${I2C_ADDR_CPLD})/cpld_version" + printf "[CPLD %d] %s\n" ${i} $(cat ${file_path}) + done +} + +#Get PSU Status +function _i2c_psu_status { + local psu_abs="" + + psu1PwGood=`cat ${PATH_SYSFS_PSU1}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU1}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu1Exist=1 + else + psu1Exist=0 + fi + + psu2PwGood=`cat ${PATH_SYSFS_PSU2}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU2}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu2Exist=1 + else + psu2Exist=0 + fi + + printf "PSU1 Exist:%x PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + +#Get register value from CPLD +function _i2c_cpld_reg_read { + local idx=$1 + local file_name=$2 + local cpld_i2c_addr=${I2C_ADDR_CPLD} + local reg_file_path + + case ${idx} in + 1) + cpld_i2c_bus=${I2C_BUS_CPLD1} + ;; + 2) + cpld_i2c_bus=${I2C_BUS_CPLD2} + ;; + 3) + cpld_i2c_bus=${I2C_BUS_CPLD3} + ;; + 4) + cpld_i2c_bus=${I2C_BUS_CPLD4} + ;; + 5) + cpld_i2c_bus=${I2C_BUS_CPLD5} + ;; + *) + echo "invalid cpld index" + exit + ;; + esac + + reg_file_path="${PATH_SYS_I2C_DEVICES}/${cpld_i2c_bus}-$(printf "%04x" ${cpld_i2c_addr})/${file_name}" + cpld_reg_val=`cat ${reg_file_path}` +} + +#util functions +function _util_i2cset { + if [ "$DEBUG" == "on" ]; then + i2cset $@ + else + i2cset $@ 1>/dev/null + fi +} + +function _i2c_set { + local i2c_bus=$1 + local i2c_addr=$2 + local reg=$3 + local mask=$4 + local value=$5 + + echo `i2cset -m $mask -y -r ${i2c_bus} ${i2c_addr} ${reg} ${value}` +} + +function _util_rmmod { + local mod=$1 + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod +} + +# get qsfp presence +function _util_get_qsfp_abs { + local phy_port=0 + + #get physical port + phy_port=$(_port_logic2phy $QSFP_PORT) + + # read status from cpld + #_qsfp_cpld_var_set ${QSFP_PORT} + _qsfp_cpld_var_set ${phy_port} + cpld_reg_file_name="${CPLD_QSFP_STATUS_KEY}_${cpld_port_index}" + _i2c_cpld_reg_read ${cpld_index} ${cpld_reg_file_name} + #status: 0 -> Down, 1 -> Up (ACTIVE_LOW in ABS_BIT) + status=$(( $(( $((${cpld_reg_val})) & (1 << ($CPLD_QSFP_STATUS_ABS_BIT)) ))?0:1 )) +} + +# get sfp presence +function _util_get_sfp_pres { + + # read status from cpld + _sfp_cpld_var_set ${SFP_PORT} + cpld_reg_file_name="${CPLD_SFP_STATUS_KEY}" + _i2c_cpld_reg_read ${cpld_index} ${cpld_reg_file_name} + #status: 0 -> Down, 1 -> Up (ACTIVE_LOW in PRES_BIT) + status=$(( $(( $((${cpld_reg_val})) & (1 << ($CPLD_SFP_STATUS_PRES_BIT)) ))?0:1 )) +} + +# valid input number +function _util_input_check { + # input parameter validation + if [[ $1 -lt $2 || $1 -gt $3 ]]; then + echo "Please input number $2~$3" + exit + fi +} + +# clear all switch port led bitmap +function _util_port_led_clear { + echo "port led clear..." + # gpio pin on GPIO MUX PCA9539#1 I/O 0.2 + # pull low to reset bitamp + output_reg=${REG_PORT0_OUT} + mask=0x04 + value=0x00 + _util_i2cset -m ${mask} -y ${NUM_MUX_9548_1_CH2} ${I2C_ADDR_MUX_9539_1} ${output_reg} ${value} + echo "Done" +} + +#Increase read socket buffer for CoPP Test +function _config_rmem { + echo "109430400" > /proc/sys/net/core/rmem_max +} + +#Set 10G Mux to CPU or Front Panel +function _i2c_10g_mux { + + echo "=========================================================" + echo "# Description: 10G Mux" + echo "=========================================================" + + local target=${TARGET_10G_MUX} + local i2c_bus=${I2C_BUS_10GMUX} + local i2c_addr=${I2C_ADDR_10GMUX} + local reg=0 + local mask=0xff + local value=0 + local file_10g_mux="${PATH_CPLD1_DEVICE}/${I2C_BUS_CPLD1}-$(printf "%04x" ${I2C_ADDR_CPLD})/cpld_10gmux_config" + + #get current 10g mux register value on CPLD + value=`cat ${file_10g_mux}` + + if [ "${target}" == "cpu" ]; then + #Set XE0: slave address access + _i2c_set $i2c_bus $i2c_addr 0x06 $mask 0x18 + #Set XE0: CH4 D_IN0-S_OUTA0 EQ + _i2c_set $i2c_bus $i2c_addr 0x2c $mask 0x00 + #Set XE0: CH5 NC-S_OUTB0 DEM + _i2c_set $i2c_bus $i2c_addr 0x35 $mask 0x80 + #Set XE0: CH5 NC-S_OUTB0 VOD + _i2c_set $i2c_bus $i2c_addr 0x34 $mask 0xab + #Set XE0: CH1 D_OUT0-S_INB0 EQ + _i2c_set $i2c_bus $i2c_addr 0x16 $mask 0x01 + #Set XE0: CH1 D_OUT0-S_INB0 DEM + _i2c_set $i2c_bus $i2c_addr 0x18 0x1f 0x80 + #Set XE0: CH1 D_OUT0-S_INB0 VOD + _i2c_set $i2c_bus $i2c_addr 0x17 $mask 0xab + #Set XE1: CH6 D_IN1-S_OUTA1 EQ + _i2c_set $i2c_bus $i2c_addr 0x3a $mask 0x00 + #Set XE1: CH7 NC-S_OUTB1 EQ + _i2c_set $i2c_bus $i2c_addr 0x41 $mask 0x00 + #Set XE1: CH7 NC-S_OUTB1 DEM + _i2c_set $i2c_bus $i2c_addr 0x43 $mask 0x80 + #Set XE1: CH7 NC-S_OUTB1 VOD + _i2c_set $i2c_bus $i2c_addr 0x42 $mask 0xab + #Set XE1: CH3 D_OUT1-S_INB1 EQ + _i2c_set $i2c_bus $i2c_addr 0x24 $mask 0x01 + #Set XE1: CH3 D_OUT1-S_INB1 DEM + _i2c_set $i2c_bus $i2c_addr 0x26 $mask 0x80 + #Set XE1: CH3 D_OUT1-S_INB1 VOD + _i2c_set $i2c_bus $i2c_addr 0x25 $mask 0xab + #Enable auto negotiation of XE ports + eval "npx_diag 'phy set mdio portlist=129,130 devad=0x7 addr=0x11 data=0x80'" + eval "npx_diag 'phy set mdio portlist=129,130 devad=0x7 addr=0x10 data=0x01'" + eval "npx_diag 'phy set mdio portlist=129,130 devad=0x7 addr=0x0 data=0x3200'" + eval "npx_diag 'phy set mdio portlist=129,130 devad=0x1 addr=0x96 data=0x2'" + #delay 1 sec + sleep 1 + + #switch 10G MUX to cpu on CPLD + value=$(( value & 0xf3 )) + echo "$(printf 0x"%x" ${value})" > ${file_10g_mux} + + echo "Switch 10G Mux to [CPU]" + + elif [ "${COLOR_LED}" == "fp" ]; then + #Set XE0: slave address access + _i2c_set $i2c_bus $i2c_addr 0x06 $mask 0x18 + #Set XE0: CH4 D_IN0-S_OUTA0 EQ + _i2c_set $i2c_bus $i2c_addr 0x2c $mask 0x00 + #Set XE0: CH4 D_IN0-S_OUTA0 DEM + _i2c_set $i2c_bus $i2c_addr 0x2e $mask 0x80 + #Set XE0: CH4 D_IN0-S_OUTA0 VOD + _i2c_set $i2c_bus $i2c_addr 0x2d $mask 0xab + #Set XE0: CH0 NC-S_INA0 EQ + _i2c_set $i2c_bus $i2c_addr 0x0f $mask 0x00 + #Set XE0: CH1 D_OUT0-S_INB0 DEM + _i2c_set $i2c_bus $i2c_addr 0x18 0x18 0x80 + #Set XE0: CH1 D_OUT0-S_INB0 VOD + _i2c_set $i2c_bus $i2c_addr 0x17 $mask 0xab + #Set XE1: CH6 D_IN1-S_OUTA1 EQ + _i2c_set $i2c_bus $i2c_addr 0x3a $mask 0x00 + #Set XE1: CH6 D_IN1-S_OUTA1 DEM + _i2c_set $i2c_bus $i2c_addr 0x3c $mask 0x80 + #Set XE1: CH6 D_IN1-S_OUTA1 VOD + _i2c_set $i2c_bus $i2c_addr 0x3b $mask 0xab + #Set XE1: CH2 NC-S_INA1 EQ + _i2c_set $i2c_bus $i2c_addr 0x1d $mask 0x00 + #Set XE1: CH3 D_OUT1-S_INB1 DEM + _i2c_set $i2c_bus $i2c_addr 0x26 $mask 0x80 + #Set XE1: CH3 D_OUT1-S_INB1 VOD + _i2c_set $i2c_bus $i2c_addr 0x25 $mask 0xab + #Enable auto negotiation of XE ports + eval "npx_diag 'phy set mdio portlist=129,130 devad=0x7 addr=0x11 data=0x0'" + eval "npx_diag 'phy set mdio portlist=129,130 devad=0x7 addr=0x10 data=0x0'" + eval "npx_diag 'phy set mdio portlist=129,130 devad=0x7 addr=0x0 data=0x2200'" + eval "npx_diag 'phy set mdio portlist=129,130 devad=0x1 addr=0x96 data=0x2200'" + #delay 1 sec + sleep 1 + + #switch 10G MUX to front panel on CPLD + value=$(( value | 0x0c )) + echo "$(printf 0x"%x" ${value})" > ${file_10g_mux} + + echo "Switch 10G Mux to [Front Panel]" + else + echo "invalid target, please set target to cpu/fp" + fi +} + +#Main Function +function _main { + tart_time_str=`date` + start_time_sec=$(date +%s) + + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_fan_speed_init" ]; then + _i2c_fan_speed_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then + _i2c_led_test + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_cb_eeprom_get" ]; then + _i2c_cb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_eeprom_sync" ]; then + _i2c_eeprom_sync + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_sfp_eeprom_get" ]; then + _i2c_sfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_init" ]; then + _i2c_qsfp_eeprom_init ${QSFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_sfp_eeprom_init" ]; then + _i2c_sfp_eeprom_init ${SFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_init" ]; then + _i2c_mb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_cb_eeprom_init" ]; then + _i2c_cb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_sfp_status_get" ]; then + _i2c_sfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_sfp_type_get" ]; then + _i2c_sfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_bmc_board_type_get" ]; then + _i2c_bmc_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then + _i2c_cpld_version + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_init + _i2c_led_test + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_cb_eeprom_get + _i2c_board_type_get + _i2c_bmc_board_type_get + _i2c_cpld_version + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_10g_mux" ]; then + _i2c_10g_mux + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" + + echo "done!!!" + fi +} + +_main diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/qsfp_monitor.sh b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/qsfp_monitor.sh new file mode 100755 index 000000000000..23a3fd066bee --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/qsfp_monitor.sh @@ -0,0 +1,105 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..63}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1)` + local identifier=`echo "$qsfp_type" | grep '^identifier=.*$' | sed -e 's/identifier=//g'` + if [ "${identifier}" == "11" ]; then + connector=`echo "$qsfp_type" | grep '^connector=.*$' | sed -e 's/connector=//g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #Optical + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to Optical" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} optical $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main + diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/s9230_64x_monitor.sh b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/s9230_64x_monitor.sh new file mode 100755 index 000000000000..8bfb22328003 --- /dev/null +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9230-64x/utils/s9230_64x_monitor.sh @@ -0,0 +1,39 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + _led_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main From 090d3f44f251fb8eb5538ad6e6eed2dbf0556a3d Mon Sep 17 00:00:00 2001 From: fengkm Date: Mon, 26 Nov 2018 18:07:29 +0800 Subject: [PATCH 3/3] fix gpio init issue --- .../s8810-32q/utils/i2c_utils.sh | 22 ++++--------- .../s9130-32x/utils/i2c_utils.sh | 32 ++++++------------- 2 files changed, 16 insertions(+), 38 deletions(-) diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh index 1f32d682d931..416e631423a7 100644 --- a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh @@ -548,25 +548,15 @@ function _gpio_export { #export gpio echo ${gpio_n} > ${PATH_SYS_GPIO}/export + #set gpio direction + echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + #set gpio active_low echo ${active_low} > ${PATH_SYS_GPIO}/gpio${gpio_n}/active_low - #set gpio direction and value - if [ "${direction}" == "out" ]; then - if [ -z "${value}" ]; then - echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - elif [ "${value}" == "0" ]; then - echo low > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - else - echo high > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - fi - elif [ "${direction}" == "in" ]; then - echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - if [ ! -z "${value}" ]; then - echo "Warning!! Unused Value (${value})" - fi - else - echo "Error!! Unknow Direction (${direction})" + #set value + if [ ! -z "${value}" ]; then + echo ${value} > ${PATH_SYS_GPIO}/gpio${gpio_n}/value fi } diff --git a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/i2c_utils.sh b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/i2c_utils.sh index f9178c862bc1..ea238e01729a 100755 --- a/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/i2c_utils.sh +++ b/platform/nephos/sonic-platform-modules-ingrasys/s9130-32x/utils/i2c_utils.sh @@ -85,6 +85,7 @@ I2C_BUS_PSU1_EEPROM=${NUM_MUX_9545_1_CH1} I2C_BUS_PSU2_EEPROM=${NUM_MUX_9545_1_CH0} PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_SYS_GPIO="/sys/class/gpio" PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon5" PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" @@ -1593,33 +1594,20 @@ function _util_gpio_export { echo "[gpio_init] gpio_n(${gpio_n}) is not provided" return fi - if [[ ${gpio_n} < 0 || ${gpio_n} > 255 ]]; then + if [[ ${gpio_n} < 0 || ${gpio_n} > $(( 255+${GPIO_OFFSET} )) ]]; then echo "[gpio_init] gpio_n(${gpio_n}) is invalid value" return fi - #export gpio + #export gpio echo ${gpio_n} > /sys/class/gpio/export - - #set gpio active_low - echo ${active_low} > /sys/class/gpio/gpio${gpio_n}/active_low - - #set gpio direction and value - if [ "${direction}" == "out" ]; then - if [ -z "${value}" ]; then - echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - elif [ "${value}" == "0" ]; then - echo low > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - else - echo high > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - fi - elif [ "${direction}" == "in" ]; then - echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction - if [ ! -z "${value}" ]; then - echo "Warning!! Unused Value (${value})" - fi - else - echo "Error!! Unknow Direction (${direction})" + #set gpio direction + echo ${direction} > /sys/class/gpio/gpio${gpio_n}/direction + #set gpio active_low + echo ${active_low} > /sys/class/gpio/gpio${gpio_n}/active_low + #set value + if [ ! -z "${value}" ]; then + echo ${value} > /sys/class/gpio/gpio${gpio_n}/value fi }