diff --git a/src/igb/Makefile b/src/igb/Makefile
index ab8c68cef32d..bf12fd3cfbef 100644
--- a/src/igb/Makefile
+++ b/src/igb/Makefile
@@ -12,6 +12,7 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% :
 	# Patch
 	pushd ./igb-$(IGB_DRIVER_VERSION)
 	patch -p1 < ../patch/0001-add-support-for-BCM54616-phy-for-intel-igb-driver.patch
+	patch -p1 < ../patch/0002-Force-disable-MII-isolate-mode-for-bcm54616.patch
 
 	# Build the package
 	pushd src
diff --git a/src/igb/patch/0002-Force-disable-MII-isolate-mode-for-bcm54616.patch b/src/igb/patch/0002-Force-disable-MII-isolate-mode-for-bcm54616.patch
new file mode 100644
index 000000000000..906d8f412b67
--- /dev/null
+++ b/src/igb/patch/0002-Force-disable-MII-isolate-mode-for-bcm54616.patch
@@ -0,0 +1,70 @@
+Ingrasys S9100 platform set the PHY address to 00h puts the device 
+into isolate mode during and after reset. So we must write 0 to 
+bit 10 of the MII Control register to return normal operation.
+
+From: wadelnn <wadelnn@users.noreply.github.com>
+
+---
+ src/e1000_82575.c |  6 ++++++
+ src/e1000_phy.c   | 15 +++++++++++++++
+ src/e1000_phy.h   |  1 +
+ 3 files changed, 22 insertions(+)
+
+diff --git a/src/e1000_82575.c b/src/e1000_82575.c
+index 049ab7b..41d70ab 100644
+--- a/src/e1000_82575.c
++++ b/src/e1000_82575.c
+@@ -1592,6 +1592,12 @@ static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw)
+ 		case I210_I_PHY_ID:
+ 			ret_val = e1000_copper_link_setup_m88_gen2(hw);
+ 			break;
++		case BCM54616_E_PHY_ID:
++			ret_val = e1000_copper_link_setup_m88(hw);
++			if (e1000_disable_mii_isolate_bcm54616(hw) != 0) {
++				DEBUGOUT("Disable bcm54616 PHY MII isolate mode failed.\n");
++			}
++			break;
+ 		default:
+ 			ret_val = e1000_copper_link_setup_m88(hw);
+ 			break;
+diff --git a/src/e1000_phy.c b/src/e1000_phy.c
+index 5172691..84c5514 100644
+--- a/src/e1000_phy.c
++++ b/src/e1000_phy.c
+@@ -1367,6 +1367,21 @@ s32 e1000_copper_link_setup_igp(struct e1000_hw *hw)
+ 	return ret_val;
+ }
+ 
++s32 e1000_disable_mii_isolate_bcm54616(struct e1000_hw *hw)
++{
++	struct e1000_phy_info *phy = &hw->phy;
++	s32 ret_val;
++	u16 phy_data;
++
++	ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
++	if (ret_val)
++		return ret_val;
++	phy_data &=~(MII_CR_ISOLATE);
++	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
++
++	return ret_val;
++}
++
+ /**
+  *  e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
+  *  @hw: pointer to the HW structure
+diff --git a/src/e1000_phy.h b/src/e1000_phy.h
+index a109c91..d72ae62 100644
+--- a/src/e1000_phy.h
++++ b/src/e1000_phy.h
+@@ -43,6 +43,7 @@ s32  e1000_check_reset_block_generic(struct e1000_hw *hw);
+ s32  e1000_copper_link_setup_igp(struct e1000_hw *hw);
+ s32  e1000_copper_link_setup_m88(struct e1000_hw *hw);
+ s32  e1000_copper_link_setup_m88_gen2(struct e1000_hw *hw);
++s32  e1000_disable_mii_isolate_bcm54616(struct e1000_hw *hw);
+ s32  e1000_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+ s32  e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+ s32  e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
+-- 
+2.1.4
+