Skip to content

Latest commit

 

History

History
22 lines (17 loc) · 1.48 KB

Fusion360 Parts Layout.md

File metadata and controls

22 lines (17 loc) · 1.48 KB

Unofficial Fusion360 parts file


It was mentioned that the Autodesk folks might be making a post-processor for MaslowCNC (GC). In preperation for optimization of Fusion360 for use with MaslowCNC I've created and shared a Fusion360 Project that incorporates and extends the 'All_Parts_Laid_Out.svg' document, designed for cutting MaslowCNC from a single sheet of plywood, and hope to continue to update this Fusion360 Project file to allow easier creation of additional MaslowCNCs and to make it easier for folks to begin building and working with Fusion360 to design things to be built with MaslowCNC.

Experienced Fusion 360 users and/or active MaslowCNC Developers are welcome to contact me in order to be added as collaborators on this project within the Fusion 360 Cloud platform.



Updated (7/7/17):

  • Parts Sketch, suitable for cutting all parts from a single piece of Plywood.
  • Seperate 'extrusions' for each part
  • Simple Component Paths: The Bare minimum to make the shapes and cuts necessary for the MaslowCNC parts.
  • Advanced Component Paths: All part paths, Pockets for the Sled mounting bolts, the Rigid Router's own plastic sled, engraved angle braces.

To be added:

  • More accurate machine settings (Feeds and Speeds) for all paths.
  • Roundover cuts for the Advanced sled, using a V-Bit

More information: Fusion360 with MaslowCNC