05-AI-engine-versal-integration

AI Engine Development See Vitis™ Development Environment on xilinx.com See Vitis™ AI Development Environment on xilinx.com

AI Engine Versal Integration

Version: Vitis 2023.2

Introduction

AMD Versal™ adaptive SoCs combine Scalar Engines, Adaptable Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application.

This tutorial demonstrates creating a system design running on the AI Engine, PS, and Programmable Logic (PL). The AI Engine domain contains a simple graph consisting of three kernels. These kernels are connected by both windows and streams. The PL domain contains data movers that provide input and capture output from the AI Engine. The PS domain contains a host application that controls the entire system. You will validate the design running on these heterogeneous domains by first emulating the hardware and then running on actual hardware.

This tutorial steps through software emulation, hardware emulation, and hardware flow in the context of a complete Versal adaptive SoC system integration. By default, the Makefile is set for sw_emu. If you need to build for hw_emu,hw, use the corresponding TARGET option as described in corresponding sections.

IMPORTANT: Before beginning the tutorial ensure you have installed Vitis™ 2023.2 software. The software includes all the embedded base platforms including the VEK280 base platform that is used in this tutorial. In addition, ensure you have downloaded the Common Images for Embedded Vitis Platforms from this link.

https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/embedded-platforms/2023-2.html

The 'common image' package contains a prebuilt Linux kernel and root file system that can be used with the Versal board for embedded design development using Vitis. Before starting this tutorial run the following steps:

1. Navigate to the directory where you have unzipped the Versal Common Image package.
2. In a Bash shell, run the /Common Images Dir/xilinx-versal-common-v2023.2/environment-setup-cortexa72-cortexa53-xilinx-linux script. This script sets up the SDKTARGETSYSROOT and CXX variables. If the script is not present, you must run the /Common Images Dir/xilinx-versal-common-v2023.2/sdk.sh.

Note : This tutorial demonstrates how software emulation can run the PS application on an x86 process instead of an Arm process(QEMU). So, you may need to unset the CXX variable during the step Running software emulation. More information is provided in the software emulation flow section.

3. Set up your ROOTFS, and IMAGE to point to the rootfs.ext4 and Image files located in the /Common Images Dir/xilinx-versal-common-v2023.2 directory.
4. Set up your PLATFORM_REPO_PATHS environment variable to $XILINX_VITIS/lin64/Vitis/2023.2/base_platforms/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm.

This tutorial targets VEK280 ES1 board for 2023.2 version.

Objectives

After completing this tutorial, you should be able to:

• Compile HLS functions for integration in the PL.
• Compile ADF graphs.
• Explore Vitis Analyzer for viewing the compilation and simulation summary reports.
• Create a configuration file that describes system connections and use it during the link stage.
• Create a software application that runs Linux.
• Package the design to run on software emulation, hardware emulation, and an easy-to-boot SD card image to run on hardware.

Tutorial Overview

Section 1: Compile AI Engine code using the AI Engine compiler for x86simulator, viewing compilation results in Vitis Analyzer.

Section 2: Simulate the AI Engine graph using the x86simulator.

Section 3: Run software emulation using QEMU and x86 process.

Section 4: Compile AI Engine code for aiesimulator, viewing compilation results in Vitis Analyzer.

Section 5: Simulate the AI Engine graph using the aiesimulator and viewing trace and profile results in Vitis Analyzer.

Section 6: Run the hardware emulation, and view run summary in Vitis Analyzer.

Section 7: Run on hardware.

The design that will be used is shown in the following figure.

Kernel	Type	Comment
MM2S	HLS	Memory Map to Stream HLS kernel to feed input data from DDR to AI Engine interpolator kernel via the PL DMA.
Interpolator	AI Engine	Half-band 2x up-sampling FIR filter with 16 coefficients. Its input and output are cint16 window interfaces and the input interface has a 16 sample margin.
Polar_clip	AI Engine	Determines the magnitude of the complex input vector and clips the output magnitude if it is greater than a threshold. The polar_clip has a single input stream of complex 16-bit samples, and a single output stream whose underlying samples are also complex 16-bit elements.
Classifier	AI Engine	This kernel determines the quadrant of the complex input vector and outputs a single real value depending which quadrant. The input interface is a cint16 stream and the output is a int32 window.
S2MM	HLS	Stream to Memory Map HLS kernel to feed output result data from AI Engine classifier kernel to DDR via the PL DMA.

Section 1: Compile AI Engine Code using the AI Engine Compiler for x86simulator, Viewing Compilation Results in Vitis Analyzer

In the early stages of the development cycle, it is critical to verify the design behavior functionally which identifies the errors. The x86 simulator is an ideal choice for testing and debugging because of the speed of iteration and the high level of data visibility it provides the developer. The x86 simulator runs exclusively on the tool development machine. This means its performance and memory use are defined by the development machine.

This tutorial design has three AI Engine kernels (interpolator, polar_clip, and classifier) and two HLS PL kernels (s2mm and mm2s).

Compiling an AI Engine ADF Graph for V++ Flow

An ADF Graph can be connected to an extensible Vitis platform. That is, the graph I/Os can be connected either to platform ports or to ports on Vitis kernels through the v++ connectivity directives.

• An AI Engine ADF C++ graph contains AI Engine kernels only.
• All interconnections between AI Engine kernels are defined in the C++ graph (graph.h).
• All interconnections to external I/Os are fully specified in the C++ simulation test bench (graph.cpp) that instantiates the C++ ADF graph object. All platform connections from the graph to the PLIO map onto ports on the AI Engine subsystem graph that are connected via v++ connectivity directives.
• No dangling ports or implicit connections are allowed by v++.
• Stream connections are specified through the v++ --sc option, including employment of PL-based data movers, either in the platform or defined outside the ADF graph as Vitis PL kernels.

To compile the graph for x86 simulator, the target to be used is x86sim, use:

make aie

Or

v++ -c --mode aie --target x86sim --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm --include "$XILINX_VITIS/aietools/include" --include "./aie" --include "./data" --include "./aie/kernels" --include "./" --work_dir=./Work aie/graph.cpp

Flag	Description
--target	Target how the compiler will build the graph and it is set to x86sim. Default is hw
--include	All the include files needed to build the graph.
--work_dir	The location where the work directory will be created.

The generated output from aiecompiler is the Work directory, and the libadf.a file. This file contains the compiled AI Engine configuration, graph, and Kernel .elf files.

Vitis Analyzer Compile Summary

Vitis Analyzer is used to view the AI Engine compilation results. Below is the graph.aiecompile_summary file generated by the aiecompiler, which is located in the Work directory.

To open the summary file, use the following command:

vitis_analyzer ./Work/graph.aiecompile_summary

The Summary view displays compilation runtime, version of the compiler used, the platform targeted, kernels created, and the exact command line used for the compilation.

The Graph view provides an overview of your graph and how the graph is designed in a logical fashion.

Clicking on any kernel in the logical diagram highlights the corresponding kernel source in the graph instance column. You can cross-probe to the source code by clicking the file.

You can click Log to view the compilation log for your graph.

Section 2: Simulate the AI Engine Graph using the x86simulator

After the graph has been compiled, you can simulate your design with the x86simulator command. The x86 simulator is an ideal choice for testing, debugging, and verifying behavior because of the speed of iteration and the high level of data visibility it provides the developer. The x86 simulation does not provide timing, resource, or performance information.

1. To run simulation run the command:

    make sim

   Or

   x86simulator --pkg-dir=./Work

   Flag	Description
   --pkg-dir	The Work directory.

2. When the simulation is completed, navigate to the x86simulator_output directory from a terminal and run: cd x86simulator_output; ls

   You should see something similar to the following:

    data/  x86sim.aierun_summary  x86simulator.log

   As you can see, a variety of files in the data directory are generated with the output file(s) you have in the graph.cpp for the PLIO objects and the x86sim.aierun_summary is generated, which contains all the information generated by x86simulator.

Vitis Analyzer

3. Open the generated x86sim.aierun_summary from the x86simulator_output directory for Vitis Analyzer. To do this, run the command:

   vitis_analyzer x86simulator_output/x86sim.aierun_summary

This opens the summary view in Vitis Analyzer that displays the simulation run time and the exact command line used for simulation.

Note: As the x86 simulation runs the design at a functional level, kernels do not physically map and route on the AI engine array. Therefore, the Array view is not available in aierun summary.

Section 3: Compile and Run Software Emulation

1. Compiling HLS Kernels using v++

To compile the mm2s, and s2mm PL HLS kernels, use the v++ compiler command which takes in an HLS kernel source and produces an .xo file.

To compile the kernels, run the following command:

make kernels

Or

v++ -c -t sw_emu --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm --save-temps -k s2mm pl_kernels/s2mm.cpp -o s2mm.xo
v++ -c -t sw_emu --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm --save-temps -k mm2s pl_kernels/mm2s.cpp -o mm2s.xo

Looking at the v++ command line, you will notice several options. The following table describes each option.

Switch/flag	Description
-c	Tells v++ to just compile the kernel.
-t	Specifies the compilation target for software emulation.
--platform/-f	Specifies the path to an extensible platform.
-k	The kernel name. This has to match the function name in the corresponding file defining the kernel. (E.g., For kernel mm2s the function name needs to be mm2s.cpp.
-o	The output file must always have the suffix .xo.
--save-temps/-s	Saves the generated output process in the _x directory.

2. Use V++ to Link AI Engine and HLS Kernels with the Platform

After the AI Engine kernels, graph, PL kernel, and HLS kernels have been compiled and simulated, you can use v++ to link them with the platform to generate an .xsa.

v++ lets you integrate your AI Engine, HLS, and RTL kernels into an existing extensible platform. This step is where the platform chosen is provided by the hardware designer (or you can opt to use one of the many extensible base platforms provided by AMD and have v++ build the hardware design for you in addition to integrating the AI Engine and PL kernels in the design.

You have a number of kernels at your disposal, but you need to tell the linker how you want to connect them together (from the AI Engine array to PL and vice versa). These connections are described in a configuration file: system.cfg, shown below.

[connectivity]
nk=mm2s:1:mm2s
nk=s2mm:1:s2mm
sc=mm2s.s:ai_engine_0.DataIn1
sc=ai_engine_0.DataOut1:s2mm.s

Option/Flag	Description
nk	Specifies the number of instantiations of the kernel. For example, nk=mm2s:1:mm2s means that the kernel mm2s will instantiate one kernel with the name mm2s.
stream_connect/sc	Specifies the streaming connections to be made between PL/AI Engine or PL/PL. In this case, it should always be an output of a kernel to the input of a kernel.

NOTE: The v++ command line can get cluttered, and using the system.cfg file can help contain it.

For ai_engine_0 the names are provided in the graph.h. For the design, as an example, this line:

in = adf::input_plio::create("DataIn1", adf::plio_32_bits,"data/input.txt");

has the name DataIn1 which is the interface name.

You can see the v++ switches in more detail in the Vitis Unified Software Platform Documentation.

To build the design run the follow command:

make xsa

or

v++ -l --platform -t sw_emu $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm s2mm.xo mm2s.xo libadf.a --save-temps -g --config system.cfg -o tutorial.xsa

Flag/Switch	Description
--link/-l	Tells v++ that it will be linking a design, so only the *.xo and libadf.a files are valid inputs.
--target/-t	Tells v++ to build to software emulation (which will build the emulation models).
--platform	Same as the previous two steps.
--config	This allows you to simplify the v++ command line if it gets too unruly and have items in an .ini style file.

Now you have a generated .xsa that will be used to execute your design on the platform.

3. Compile the A72 Host Application

When all the new AI Engine outputs are created, you can compile your host application using g++(Note: we are not using a typical cross-compilation flow for the Cortex-A72) . As you might notice, the host code uses XRT (Xilinx Run Time) as an API to talk to the AI Engine and PL kernels. Notice that in the linker, it is using the library -lxrt_coreutil. Note that to compile the host code, it is required to use the c++17 package. Ensure your gcc or g++ compiler has the necessary packages installed.

a. Open sw/host.cpp and familiarize yourself with the contents. Pay close attention to API calls and the comments provided.

Note: XRT is used in the host application. This API layer is used to communicate with the PL, specifically the PLIO kernels for reading and writing data. To understand how to use this API in an AI Engine application refer to "Programming the PS Host Application".

b. Open the Makefile, and familiarize yourself with the contents. Take note of the GCC_FLAGS, GCC_INCLUDES which are self-explanatory that you will be compiling this code with C++ 17. More explanation will be provided in the packaging step.

Note: XRT needs to be installed on the host and the $XILINX_XRT variable should be set by sourcing the /opt/xilinx/xrt/setup.sh.

c. Unset the CXX variable that points to the aarch64-linux-gnu-g++ compiler. Run the following command to set g++ for the x86 process.

d. Close the Makefile, and run the command:

     make host

or

     cd ./sw

     g++ -Wall -c -std=c++17 -D__PS_ENABLE_AIE__ -Wno-int-to-pointer-cast -I$XILINX_XRT/include -I./ -I../aie -I$XILINX_VITIS/aietools/include  -o host.o host.cpp
 
     g++ *.o -lxrt_coreutil -std=c++17 -L$XILINX_XRT/lib -o ./host_ps_on_x86

cd ..

The follow table describes some of the GCC options being used.

Flag	Description
-Wall	Print out all warnings.
-std=c++17	This is required for Linux applications using XRT.
-I$XILINX_XRT/lib	This includes the XRT libraries that are used in host code.

4. Package the Design

With all the AI Engine outputs and the new platform created, you can now generate the packaged SD card directory contains everything to run your generated application and .xclbin. In addition to packaging, the emconfigutil command is used to generate the device, board, and device tree details (emconfig.json) which are required by XRT before loading the xclbin.

To package the design, run the following command:

make package

Or

emconfigutil --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm --nd 1

followed by

cd ./sw
v++ -p -t sw_emu \
    --package.defer_aie_run \
    --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm \
    --package.out_dir ./package.sw_emu \
    ../tutorial.xsa ../libadf.a
cd ..

NOTE: By default the --package flow will create a a.xclbin automatically if the -o switch is not set.

The following table describes the packager options:

Switch/flag	Description
defer_aie_run	Tells the packager at boot to not start the AI Engine and let the host application control it.
out_dir	Specifies the package output directory.

5. Run Software Emulation

After packaging everything is set to run emulation. This step demonstrates how software emulation can run the PS application on an x86 process (instead of an Arm process for an AI Engine design). Software emulation is an abstract model and first step to build and test the system in a functional process. It does not use any of the PetaLinux drivers such as Zynq OpenCL (ZOCL), interrupt controller, or Device Tree Binary (DTB). Hence, the overhead of creating an sd_card.img, and booting PetaLinux on a full QEMU machine is too heavyweight for software emulation and can be avoided.

a. To run emulation use the following command:

make run_emu 

Or

cd ./sw
setenv XCL_EMULATION_MODE sw_emu
./host_ps_on_x86 a.xclbin 

b. You should see an output displaying TEST PASSED.

Section 4: Compile AI Engine Code for AIE Simulator: Viewing Compilation Results in Vitis Analyzer

Important

If you have performed the steps for Software Emulation, ensure you follow the guidance below. If not, you can skip this step and proceed to 'Compiling an AI Engine Graph'.

1. Set back the SYSROOT and CXX variables as mentioned in the Introduction.

2. Clean the Working directory to remove all the files that are related to the software emulation by running the following command:

   make clean

Compiling an AI Engine ADF Graph for V++ Flow

To compile the graph type to be used in either HW or HW_EMU, use:

make aie TARGET=hw

Or

v++ -c --mode aie --target hw --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm --include "$XILINX_VITIS/aietools/include" --include "./aie" --include "./data" --include "./aie/kernels" --include "./" --aie.xlopt=0 --work_dir=./Work aie/graph.cpp

The generated output from aiecompiler is the Work directory, and the libadf.a file. This file contains the compiled AI Engine configuration, graph, and Kernel .elf files.

Vitis Analyzer Compile Summary

Vitis Analyzer is used to view the AI Engine compilation results. It highlights the state of compilation, displays the graph solution in both the Graph and Array views, provides guidance around the kernel code, and allows you to open various reports produced by aiecompiler. Below is the graph.aiecompile_summary file generated by the aiecompiler, which is located in the Work directory.

To open the summary file, use the following command:

vitis_analyzer ./Work/graph.aiecompile_summary

The Summary View displays the compilation runtime, the version of the compiler used, the platform targeted, kernels created, and the exact command line used for the compilation.

1. Click Kernel Guidance. This view provides a list of messages (INFO, Warning, Critical Warning) and provides optimization and best practice guidance for kernel development. By default, INFO messages are hidden.

   

2. Click Mapping Analysis. This report provides detailed mapping information which the aiecompiler generates for mapping the graph to the AI Engine.

   

3. Click DMA Analysis. This is a text report showing a summary of the DMA accesses from the graph.

   

4. Click Lock Allocation. This shows the locks per buffer and where it is mapped in the ADF Graph.

   

5. Click Log. This is the compilation log for your graph.

   

6. Click AI Engine Compilation. This view shows the individual logs and command line options for the individual Tile compilations. The following figure shows an example of the kernel in Tile [18,0].

   

Note: The Graph View and Array View are presented in the next section.

Section 5: Simulate the AI Engine Graph using the aiesimulator and Viewing Trace and Profile Results in Vitis Analyzer

After the graph has been compiled, you can simulate your design with the aiesimulator command. This uses a cycle-approximate model to test your graph and get preliminary throughput information early in the design cycle, while the PL developers continue to work on the platform for the application.

Note: Simulating the design with VCD will increase simulation runtime. To learn more about this feature, see AI Engine SystemC Simulator.

1. To run simulation use the command:

   make sim TARGET=hw

   or

   aiesimulator --profile --dump-vcd=tutorial --pkg-dir=./Work

   Flag	Description
   --profile	Profiles all kernels, or select kernels (col,row)...(col,row).
   --dump-vcd	Grabs internal signals of tiles and dumps it in a VCD file.
   --pkg-dir	The Work directory.

2. When simulation has completed, use a terminal to navigate to the aiesimulator_output directory by running: cd aiesimulator_output; ls

   You should see something similar to this:

aiesim_options.txt memconfig.json profile_funct_18_1.txt profile_funct_19_0.xml profile_instr_18_0.txt profile_instr_18_1.xml profile_instr_19_1.txt data profile_funct_18_0.txt profile_funct_18_1.xml profile_funct_19_1.txt profile_instr_18_0.xml profile_instr_19_0.txt profile_instr_19_1.xml default.aierun_summary profile_funct_18_0.xml profile_funct_19_0.txt profile_funct_19_1.xml profile_instr_18_1.txt profile_instr_19_0.xml ```

The files prefixed with `profile_` are the outputs of the profiling and calculated per tile. In this tutorial, profiling is done for all tiles that are used, but you can limit profiling to specific tiles by providing the row and column of the tile. For more information about profiling with `aiesimulator` see [here](https://www.xilinx.com/html_docs/xilinx2021.2/vitis_doc/simulate_graph_application.html#yfx1512608800495). You can open up these files to see what was calculated, but it is better to view it in Vitis Analyzer where it is curated. The `data` directory is generated here with the output file(s) you have in the `graph.cpp` for the PLIO objects. Finally, the `default.aierun_summary` is generated, which contains all the information generated by `aiesimulator` with profiling and trace information. Opening this file in Vitis Analyzer allows you to browse all the output files, and profile/trace data.

**NOTE**: The `tutorial.vcd` is generated on the same level as the `./Work` directory.

You can now open the generated `default.aierun_summary` from the `aiesimulator_output` directory for Vitis Analyzer.

3. To do this,run the command:

   vitis_analyzer ./aiesimulator_output/default.aierun_summary

   With this tool you can use a variety of views to debug and potentially optimize your graph.

   The Summary view provides an overview of running aiesimulator. As you can see in the following figure, it provides information on status, version used, time, platform used, and the command line used to execute.

   

4. Click Profile.

   The Profile View provides detailed information collected during the simulation. Information includes cycle count, total instructions executed, program memory, and specific information per functions in the two tiles that the kernels are programmed.

   

   This is the top-level view of the profile. The left column allows you to select one of many types of reports generated per function.

5. Select the first Total Function Time from this column. You will see the following.

   

   In this chart you can see what function is called most, function time, etc. This information can be useful in determining if the tile is under- or over-utilized in your design.

6. Click Graph.

   The Graph view provides an overview of your graph and how the graph is designed in a logical fashion. In this view, you can see all the PLIO ports, kernels, buffers, and net connections for the entire ADF Graph.

   Note: This view, as well as the Array view have cross-probe selection, meaning selecting an object in this view will select it in the other and vice versa.

   

7. Click Array.

   The Array view provides a logical device view of the AI Engine, AI Engine Memory tiles, kernel placement, and how they are connected to each other as well as the Interface tiles.

   

   • Cross probe to kernel and graph source files.
   • The table at the bottom shows the following:
     • Kernel - The kernels in the graph.
     • PL - Shows connections between the graph and PLIO.
     • Buffer - Shows all the buffers used for inputs/outputs of the graph and the buffers for kernels.
     • Port - Shows all the ports of each kernel and ADF Graph.
     • Nets - Shows all nets, named and generated, mapped in the ADF Graph.
     • Tiles - Shows tile data (kernels, buffers) of mapped tiles and their grid location.
     • Interface Channels - Shows interface channel information with channel number.

   Tip: For more detailed information about these tables, see Chapter 9 - Section: "Viewing Compilation Results in the Vitis Analyzer".

   You can zoom into the view to get finer detail of the AI Engine and see how tiles are made up as seen in the following screenshot.

8. To zoom in, click and drag from the upper-left to the lower-right of the area you want to view to have a box show up around the area to zoom. Below is a zoomed-in area.

   

   In this zoomed in location you can see how the kernels are connected to a variety of tiles and how the shim is connected to the PLIO ports of this design.

9. Click Simulator Output.

   Finally, the Simulator Output view. This will print out the output.txt generated by the graph. This is a timestamped output.

   Note: If you need to compare this file to a golden one, you will need have to remove the -T ####ns- from the file.

   

   If you need to make any changes to the ADF Graph or the kernels inside based on results of the aiesimulator you can do so and re-run the compiler and view the results in Vitis Analyzer to see the changes you have made.

10. When you are done with Vitis Analyzer, close it by clicking File > Exit.

Section 6: Run the Hardware Emulation, and View Run Summary in Vitis Analyzer

1. Compiling HLS Kernels Using v++

As done for sw_emu target in Section 3, compile the mm2s, and s2mm PL HLS kernels using the v++ compiler command - which takes in an HLS kernel source and produces an .xo file.

To compile the kernels, run the following command:

make kernels TARGET=hw_emu

or

v++ -c --mode hls --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm --config pl_kernels/s2mm.cfg
v++ -c --mode hls --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm --config pl_kernels/mm2s.cfg

To get more details about several options of v++ command line, refer to the Compiling HLS Kernels Using V++ topic in Section 3 The only extra switch that is added is -g, which is required to capture waveform data.

2. Use V++ to Link AI Engine, HLS Kernels with the Platform

After the AI Engine kernels, graph, PL kernel, and HLS kernels have been compiled and simulated, you can use v++ to link them with the platform to generate an .xsa.

As explained in Section 3, you use the system.cfg configuration file to connect the AI Engine and PL kernels in the design.

[connectivity]
nk=mm2s:1:mm2s
nk=s2mm:1:s2mm
sc=mm2s.s:ai_engine_0.DataIn1
sc=ai_engine_0.DataOut1:s2mm.s

To build the design, run the following command:

make xsa TARGET=hw_emu

or

v++ -l --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm s2mm.xo mm2s.xo libadf.a -t hw_emu --save-temps -g --config system.cfg -o tutorial.xsa

Now you have a generated .xsa that will be used to execute your design on the platform.

3.Compile the A72 Host Application

Note: Unlike the software emulation where we used a g++ compiler to compile the host application, you use Arm cross-compiler aarch64-xilinx-linux-g++ in hardware emulation. If you have exercised the software emulation step, please make sure to setback the SYSROOT and CXX variables as mentioned in the Introduction.

To compile the A72 host application, run the command:

make host

Or

cd ./sw

aarch64-xilinx-linux-g++ -Wall -c -std=c++14 -Wno-int-to-pointer-cast --sysroot=$SDKTARGETSYSROOT -I$SDKTARGETSYSROOT/usr/include/xrt -I$SDKTARGETSYSROOT/usr/include -I./ -I../aie -I$XILINX_VITIS/aietools/include -I$XILINX_VITIS/include -o main.o .cpp

aarch64-xilinx-linux-g++ main.o -lxrt_coreutil -L$SDKTARGETSYSROOT/usr/lib --sysroot=$SDKTARGETSYSROOT -L$XILINX_VITIS/aietools/lib/aarch64.o -o host.exe
cd ..

For more details about the GCC options being used, refer to Section 3 topic - Compile the A72 Host Application.

4.Package the Design

With all the AI Engine outputs and the new platform created, you can now generate the Programmable Device Image (PDI) and a package to be used on an SD card. The PDI contains all executables, bitstreams, and configurations of every element of the device. The packaged SD card directory contains everything to boot Linux and have your generated application, and .xclbin.

To package the design, run the following command:

make package TARGET=hw_emu

Or

cd ./sw
v++ --package -t hw_emu \
    -f $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm \
    --package.rootfs=$PLATFORM_REPO_PATHS/sw/versal/xilinx-versal-common-v2023.2/rootfs.ext4 \
    --package.image_format=ext4 \
    --package.boot_mode=sd \
    --package.kernel_image=$PLATFORM_REPO_PATHS/sw/versal/xilinx-versal-common-v2023.2/Image \
    --package.defer_aie_run \
    --package.sd_file host.exe ../tutorial.xsa ../libadf.a
cd ..

NOTE: By default the --package flow will create a a.xclbin automatically if the -o switch is not set.

For more details on the packager options, refer to Section 3, topic: Package the Design.

5.Run Hardware Emulation

After packaging, everything is set to run emulation. Since you ran aiesimulator with profiling enabled, you can bring that to hardware emulation. You can pass the aiesim_options.txt to the launch_hw_emu.sh which will enable the profiling options used in aiesimulator to be applied to hardware emulation. To do this, add the -aie-sim-options ../aiesimulator_output/aiesim_options.txt.

1. To run emulation use the following command:

   make run_emu TARGET=hw_emu

   or

   cd ./sw
   ./launch_hw_emu.sh -aie-sim-options ../aiesimulator_output/aiesim_options.txt -add-env AIE_COMPILER_WORKDIR=../Work

   When launched, use the Linux prompt presented to run the design. Note that the emulation process is slow, so do not touch the keyboard of your terminal or you might stop the emulation of the Versal booth (as it happens in the real HW board).

2. Execute the following command when the emulated Linux prompt appears:

   cd /run/media/*1
   export XILINX_XRT=/usr
   dmesg -n 4 && echo "Hide DRM messages..."

   This will set up the design to run emulation and remove any unnecessary DRM messaging.

3. Run the design using the following command:

   ./host.exe a.xclbin

   Note: The design runs with dumping VCD, which will extend emulation time. It may seem as if it is hung, but it is not.

4. You should see an output displaying TEST PASSED. When this is shown, run the keyboard command: Ctrl+A x to end the QEMU instance.

5. To view the profiling results and trace in Vitis Analyzer, run the command:

   vitis_analyzer sw/sim/behav_waveform/xsim/default.aierun_summary

   

   When you open the run Summary, you will notice that it is the same layout as that from aiesimulator.

6. Click Trace. This will open up the VCD data (as defined in the aiesim_options.txt). This gives detailed information about kernels, tiles, and nets within the AI Engine during execution. Here you can see stalls in regards to each kernel and can help you identify where they are originating.

   

7. Click Profile. This will bring up the same view as shown for the profiling of the aiesimulator, but now it will have information gathered from running hardware emulation.

8. Click Total Function Time. Your display will appear as follows.

   

   Notice that the values here differ from those in aiesimulator.

   The final two views: Graph and Array are the same as in the aiesimulator run summary.

9. Open the aiesimulator run Summary by clicking File > Open Summary, navigating to the aiesimulator_output directory, and clicking default.aierun_summary.

   Explore the two reports and take note of any differences and similarities. This will help you debug and optimize your design.

10. Close out of the Vitis Analyzer and build for hardware.

Section 7: Build and Run on Hardware

1. To build for hardware, run the following command:

   cd ..
   make xsa TARGET=hw

   or

   v++ -l --platform $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm s2mm.xo mm2s.xo libadf.a -t hw --save-temps -g --config system.cfg -o tutorial.xsa

2. Then re-run the packaging step with:

   make package TARGET=hw

   or

   cd ./sw
   v++ --package -t hw \
       -f $PLATFORM_REPO_PATHS/xilinx_vek280_es1_base_202320_1/xilinx_vek280_es1_base_202320_1.xpfm \
       --package.rootfs=$PLATFORM_REPO_PATHS/sw/versal/xilinx-versal-common-v2023.2/rootfs.ext4 \
       --package.image_format=ext4 \
       --package.boot_mode=sd \
       --package.kernel_image=$PLATFORM_REPO_PATHS/sw/versal/xilinx-versal-common-v2023.2/Image \
       --package.defer_aie_run \
       --package.sd_file host.exe ../tutorial.xsa ../libadf.a
   cd ..

   When you run on hardware, ensure you have a supported SD card. Format the SD card with the sw/sd_card.img file. Then plug the SD card into the board and power it up.

3. When a Linux prompt appears, run the following commands:

   dmesg -n 4 && echo "Hide DRM messages..."
   cd /run/media/*1
   export XILINX_XRT=/usr
   ./host.exe a.xclbin

You should see TEST PASSED. You have successfully run your design on hardware.

IMPORTANT: To re-run the application you need to power cycle the board.

Summary

In this tutorial you learned the following:

• How to compile PLIO and PL Kernels using v++ -c.
• How to link the libadf.a, PLIO, and PL kernels to the xilinx_vek280_es1_base_202320_1 platform.
• How to use Vitis Analyzer to explore the various reports generated from compilation and emulation/simulation.
• How to package your host code, and the generated xclbin and libadf.a into an SD card directory.
• How to execute the design for software emulation.
• How to execute the design for hardware emulation.
• How to execute the design on the board.

To read more about the use of Vitis in the AI Engine flow see: UG1076: AI Engine Tools and Flows User Guide: Integrating the Application Using the Vitis Tool Flow.

Support

GitHub issues will be used for tracking requests and bugs. For questions go to support.xilinx.com.

_{Copyright © 2020–2023 Advanced Micro Devices, Inc}

^{Terms and Conditions}