feat: enable more VIRTIO options

This matches options enabled in Ubuntu default config.

The hope is/was that it might fix `virtio-balloon` memory reporting, but
I'm not sure that it will help.

Signed-off-by: Andrey Smirnov <smirnov.andrey@gmail.com>

kernel/kernel/config-amd64

@@ -1612,7 +1612,7 @@ CONFIG_OPENVSWITCH_VXLAN=y
 CONFIG_VSOCKETS=y
 CONFIG_VSOCKETS_DIAG=y
 CONFIG_VSOCKETS_LOOPBACK=y
-# CONFIG_VIRTIO_VSOCKETS is not set
+CONFIG_VIRTIO_VSOCKETS=y
 CONFIG_VIRTIO_VSOCKETS_COMMON=y
 # CONFIG_HYPERV_VSOCKETS is not set
 CONFIG_NETLINK_DIAG=y
@@ -3569,6 +3569,7 @@ CONFIG_DRM_FBDEV_EMULATION=y
 CONFIG_DRM_FBDEV_OVERALLOC=100
 # CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
 # CONFIG_DRM_DP_CEC is not set
+CONFIG_DRM_GEM_SHMEM_HELPER=y
 
 #
 # I2C encoder or helper chips
@@ -3609,7 +3610,7 @@ CONFIG_DRM_I915_TIMESLICE_DURATION=1
 # CONFIG_DRM_MGAG200 is not set
 # CONFIG_DRM_QXL is not set
 # CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_VIRTIO_GPU is not set
+CONFIG_DRM_VIRTIO_GPU=y
 CONFIG_DRM_PANEL=y
 
 #
@@ -4446,9 +4447,10 @@ CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_PCI_LEGACY=y
 CONFIG_VIRTIO_BALLOON=y
-# CONFIG_VIRTIO_INPUT is not set
+CONFIG_VIRTIO_INPUT=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
 # CONFIG_VDPA is not set
 CONFIG_VHOST_IOTLB=y
 CONFIG_VHOST=y
@@ -4611,8 +4613,10 @@ CONFIG_HYPERV_IOMMU=y
 #
 # Rpmsg drivers
 #
+CONFIG_RPMSG=y
+# CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
-# CONFIG_RPMSG_VIRTIO is not set
+CONFIG_RPMSG_VIRTIO=y
 # end of Rpmsg drivers
 
 # CONFIG_SOUNDWIRE is not set
@@ -4784,7 +4788,7 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=y
 # CONFIG_CUSE is not set
-# CONFIG_VIRTIO_FS is not set
+CONFIG_VIRTIO_FS=y
 CONFIG_OVERLAY_FS=y
 # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
 CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y

kernel/kernel/config-arm64

@@ -1698,7 +1698,7 @@ CONFIG_OPENVSWITCH_VXLAN=y
 CONFIG_VSOCKETS=y
 CONFIG_VSOCKETS_DIAG=y
 CONFIG_VSOCKETS_LOOPBACK=y
-# CONFIG_VIRTIO_VSOCKETS is not set
+CONFIG_VIRTIO_VSOCKETS=y
 CONFIG_VIRTIO_VSOCKETS_COMMON=y
 CONFIG_NETLINK_DIAG=y
 CONFIG_MPLS=y
@@ -2158,6 +2158,7 @@ CONFIG_NVME_FC=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_QCOM_COINCELL is not set
+# CONFIG_QCOM_FASTRPC is not set
 # CONFIG_APDS9802ALS is not set
 # CONFIG_ISL29003 is not set
 # CONFIG_ISL29020 is not set
@@ -4456,6 +4457,7 @@ CONFIG_DRM_FBDEV_OVERALLOC=100
 # CONFIG_DRM_DP_CEC is not set
 CONFIG_DRM_GEM_CMA_HELPER=y
 CONFIG_DRM_KMS_CMA_HELPER=y
+CONFIG_DRM_GEM_SHMEM_HELPER=y
 
 #
 # I2C encoder or helper chips
@@ -4506,7 +4508,7 @@ CONFIG_DRM_SUN8I_MIXER=y
 CONFIG_DRM_SUN8I_TCON_TOP=y
 # CONFIG_DRM_QXL is not set
 # CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_VIRTIO_GPU is not set
+CONFIG_DRM_VIRTIO_GPU=y
 # CONFIG_DRM_MSM is not set
 CONFIG_DRM_PANEL=y
 
@@ -6030,11 +6032,12 @@ CONFIG_VIRTIO=y
 CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_PCI_LEGACY=y
-# CONFIG_VIRTIO_PMEM is not set
+CONFIG_VIRTIO_PMEM=y
 CONFIG_VIRTIO_BALLOON=y
-# CONFIG_VIRTIO_INPUT is not set
+CONFIG_VIRTIO_INPUT=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
 # CONFIG_VDPA is not set
 CONFIG_VHOST_IOTLB=y
 CONFIG_VHOST=y
@@ -6401,8 +6404,10 @@ CONFIG_ARM_SMMU_V3=y
 #
 # Rpmsg drivers
 #
+CONFIG_RPMSG=y
+# CONFIG_RPMSG_CHAR is not set
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
-# CONFIG_RPMSG_VIRTIO is not set
+CONFIG_RPMSG_VIRTIO=y
 # end of Rpmsg drivers
 
 # CONFIG_SOUNDWIRE is not set
@@ -6477,6 +6482,9 @@ CONFIG_MTK_MMSYS=y
 # CONFIG_QCOM_OCMEM is not set
 # CONFIG_QCOM_RMTFS_MEM is not set
 # CONFIG_QCOM_RPMH is not set
+# CONFIG_QCOM_SMD_RPM is not set
+# CONFIG_QCOM_WCNSS_CTRL is not set
+# CONFIG_QCOM_APR is not set
 # end of Qualcomm SoC drivers
 
 CONFIG_SOC_RENESAS=y
@@ -7307,7 +7315,7 @@ CONFIG_AUTOFS4_FS=y
 CONFIG_AUTOFS_FS=y
 CONFIG_FUSE_FS=y
 # CONFIG_CUSE is not set
-# CONFIG_VIRTIO_FS is not set
+CONFIG_VIRTIO_FS=y
 CONFIG_OVERLAY_FS=y
 # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
 CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y