docs: add mayastor quickstart

This PR adds some documentation on how to use mayastor with talos and
links the video showing it in action.

Signed-off-by: Spencer Smith <robertspencersmith@gmail.com>

website/content/docs/v0.10/Guides/storage.md

@@ -3,7 +3,7 @@ title: "Storage"
 description: ""
 ---
 
-Talos is known to work with Rook and NFS.
+Talos is known to work with Rook, Mayastor (OpenEBS) and NFS.
 
 ## Rook
 
@@ -13,3 +13,121 @@ We recommend at least Rook v1.5.
 
 The NFS client is part of the [`kubelet` image](https://github.com/talos-systems/kubelet) maintained by the Talos team.
 This means that the version installed in your running `kubelet` is the version of NFS supported by Talos.
+
+## Mayastor (OpenEBS)
+
+### Video Walkthrough
+
+To see a live demo of this section, see the video below:
+
+<iframe width="560" height="315" src="https://www.youtube.com/embed/q86Kidk81xE" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
+
+### Prep Nodes
+
+Either during initial cluster creation or on running worker nodes, several machine config values should be edited.
+This can be done with `talosctl edit machineconfig` or via config patches during `talosctl gen config`.
+
+- Under `/machine/sysctls`, add `vm.nr_hugepages: "512"`
+- Under `/machine/kubelet/extraMounts`, add `/var/local` like so:
+
+```yaml
+...
+extraMounts:
+  - destination: /var/local
+    type: bind
+    source: /var/local
+    options:
+    - rbind
+    - rshared
+    - rw
+...
+```
+
+- Either using `kubectl taint node` in a pre-existing cluster or by updating `/machine/kubelet/extraArgs` in machine config, add `openebs.io/engine=mayastor` as a node label.
+If being done via machine config, `extraArgs` may look like:
+
+```yaml
+...
+extraArgs:
+  node-labels: openebs.io/engine=mayastor
+...
+```
+
+### Deploy Mayastor
+
+Using the [Mayastor docs](https://mayastor.gitbook.io/introduction/quickstart/deploy-mayastor) as a reference, apply all YAML files necessary.
+At the time of writing this looked like:
+
+```bash
+kubectl create namespace mayastor
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/moac-rbac.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/nats-deployment.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/csi/moac/crds/mayastorpool.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/csi-daemonset.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/moac-deployment.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/mayastor-daemonset.yaml
+```
+
+### Create Pools
+
+Each "storage" node should have a "MayastorPool" that defines the local disks to use for storage.
+These are later considered during scheduling and replication of data.
+Create the pool by issuing the following, updating as necessary:
+
+```bash
+cat <<EOF | kubectl create -f -
+apiVersion: "openebs.io/v1alpha1"
+kind: MayastorPool
+metadata:
+  name: pool-on-talos-xxx
+  namespace: mayastor
+spec:
+  node: talos-xxx
+  disks: ["/dev/sdx"]
+EOF
+```
+
+### Create StorageClass
+
+With the pools created for each node, create a storage class that uses the `nvmf` protocol, updating the number of replicas as necessary:
+
+```bash
+cat <<EOF | kubectl create -f -
+kind: StorageClass
+apiVersion: storage.k8s.io/v1
+metadata:
+  name: mayastor-nvmf
+parameters:
+  repl: '1'
+  protocol: 'nvmf'
+provisioner: io.openebs.csi-mayastor
+EOF
+```
+
+### Consume Storage
+
+The storage can now be consumed by creating a PersistentVolumeClaim (PVC) that references the StorageClass.
+The PVC can then be used by a Pod or Deployment.
+An example of creating a PersistentVolumeClaim may look like:
+
+```bash
+cat <<EOF | kubectl create -f -
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: mayastor-volume-claim
+spec:
+  accessModes:
+  - ReadWriteOnce
+  resources:
+    requests:
+      storage: 1Gi
+  storageClassName: mayastor-nvmf
+EOF
+```

website/content/docs/v0.11/Guides/storage.md

@@ -3,7 +3,7 @@ title: "Storage"
 description: ""
 ---
 
-Talos is known to work with Rook and NFS.
+Talos is known to work with Rook, Mayastor (OpenEBS) and NFS.
 
 ## Rook
 
@@ -13,3 +13,121 @@ We recommend at least Rook v1.5.
 
 The NFS client is part of the [`kubelet` image](https://github.com/talos-systems/kubelet) maintained by the Talos team.
 This means that the version installed in your running `kubelet` is the version of NFS supported by Talos.
+
+## Mayastor (OpenEBS)
+
+### Video Walkthrough
+
+To see a live demo of this section, see the video below:
+
+<iframe width="560" height="315" src="https://www.youtube.com/embed/q86Kidk81xE" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
+
+### Prep Nodes
+
+Either during initial cluster creation or on running worker nodes, several machine config values should be edited.
+This can be done with `talosctl edit machineconfig` or via config patches during `talosctl gen config`.
+
+- Under `/machine/sysctls`, add `vm.nr_hugepages: "512"`
+- Under `/machine/kubelet/extraMounts`, add `/var/local` like so:
+
+```yaml
+...
+extraMounts:
+  - destination: /var/local
+    type: bind
+    source: /var/local
+    options:
+    - rbind
+    - rshared
+    - rw
+...
+```
+
+- Either using `kubectl taint node` in a pre-existing cluster or by updating `/machine/kubelet/extraArgs` in machine config, add `openebs.io/engine=mayastor` as a node label.
+If being done via machine config, `extraArgs` may look like:
+
+```yaml
+...
+extraArgs:
+  node-labels: openebs.io/engine=mayastor
+...
+```
+
+### Deploy Mayastor
+
+Using the [Mayastor docs](https://mayastor.gitbook.io/introduction/quickstart/deploy-mayastor) as a reference, apply all YAML files necessary.
+At the time of writing this looked like:
+
+```bash
+kubectl create namespace mayastor
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/moac-rbac.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/nats-deployment.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/csi/moac/crds/mayastorpool.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/csi-daemonset.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/moac-deployment.yaml
+
+kubectl apply -f https://raw.githubusercontent.com/openebs/Mayastor/master/deploy/mayastor-daemonset.yaml
+```
+
+### Create Pools
+
+Each "storage" node should have a "MayastorPool" that defines the local disks to use for storage.
+These are later considered during scheduling and replication of data.
+Create the pool by issuing the following, updating as necessary:
+
+```bash
+cat <<EOF | kubectl create -f -
+apiVersion: "openebs.io/v1alpha1"
+kind: MayastorPool
+metadata:
+  name: pool-on-talos-xxx
+  namespace: mayastor
+spec:
+  node: talos-xxx
+  disks: ["/dev/sdx"]
+EOF
+```
+
+### Create StorageClass
+
+With the pools created for each node, create a storage class that uses the `nvmf` protocol, updating the number of replicas as necessary:
+
+```bash
+cat <<EOF | kubectl create -f -
+kind: StorageClass
+apiVersion: storage.k8s.io/v1
+metadata:
+  name: mayastor-nvmf
+parameters:
+  repl: '1'
+  protocol: 'nvmf'
+provisioner: io.openebs.csi-mayastor
+EOF
+```
+
+### Consume Storage
+
+The storage can now be consumed by creating a PersistentVolumeClaim (PVC) that references the StorageClass.
+The PVC can then be used by a Pod or Deployment.
+An example of creating a PersistentVolumeClaim may look like:
+
+```bash
+cat <<EOF | kubectl create -f -
+apiVersion: v1
+kind: PersistentVolumeClaim
+metadata:
+  name: mayastor-volume-claim
+spec:
+  accessModes:
+  - ReadWriteOnce
+  resources:
+    requests:
+      storage: 1Gi
+  storageClassName: mayastor-nvmf
+EOF
+```