Cisco-iOS

#Cisco iOS - Commands
#Jose Moruno Cadima <sniferl4bs>

#Enters enable mode
enable

# Short for, configure terminal
conf t

#Configure FastEthernet 0/0	
(config)# interface fa0/0

#Add ip to fa0/0	
(config-if)# ip addr 0.0.0.0 255.255.255.255

#Add ip to fa0/0	
(config-if)# ip addr 0.0.0.0 255.255.255.255
	
#Configure vty line
(config-if)# line vty 0 4

#Cisco set telnet password
(config-line)# login

#Set telnet password
(config-line)# password YOUR-PASSWORD

#Show running config loaded in memory
# show running-config

#Show sartup config
# show startup-config
	
#show cisco IOS version
# show version

#display open sessions
# show session

#Show network interfaces
# show ip interface

#Show detailed interface info
# show interface e0

#Show routes
# show ip route
	
Show access lists
# show access-lists

#Show available files
# dir file systems

#File information
# dir all-filesystems

#Show deleted files
# dir /all

#No limit on terminal output
# terminal length 0

#Copys running config to tftp server
# copy running-config tftp

#Copy startup-config to running-config
# copy running-config startup-config