Skip to content

thanosd/bipod-for-ax1-antenna

Repository files navigation

bipod-for-ax1-antenna

3D printed bipod for Elecraft's AX1 antenna

Notes

This is a simple 3D printed mount for the Electraft AX1.

When inserting the antenna into the grip, push the grip up from the bottom of the antenna, as the antenna is a bit thinner on the bottom. It's a snug fit.

You can use M3 screws, about 18-20mm long to attach the logs to the main grip.

  • Requires the BOSL OpenSCAD library, which you can get from here: https://github.com/revarbat/BOSL
  • Sometimes the joiners stop rendering. Flushing the OpenSCAD cache seems to fix that.

Notices

This project is not sponsored in any way by Elecraft. "Electraft" & "AX1" are likely their trademarks and not affiliated with this project. They make great stuff, including a nice bipod you can buy from them. https://www.elecraft.com/

About

3D printed bipod for Elecraft's AX1 antenna

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published