parameters_miehe_tension_adaptive.prm

# Listing of Example single edge notched test (Miehe 2010)
# 
# --------------------------------------------------------

subsection Global parameters
  set Global pre-refinement steps	= 4
  set Local pre-refinement steps  	= 0
  set Adaptive refinement cycles        = 2
  set Max No of timesteps  	  	= 88
  # Miehe arbeitet mit 1.0e-5, 
  # und dann mit 1.0e-6
  set Timestep size			= 1.0e-4 
  set Timestep size to switch to	= 1.0e-5
  set Switch timestep after steps	= 58

  # active set, simple monolithic
  set outer solver                      = active set#simple monolithic #active set
  set test case                         = miehe tension
  set ref strategy                      = phase field #fixed preref miehe tension

  set value phase field for refinement  = 0.5
  set Output filename	    		= solution_miehe_tension_ref_adapt_4_2_
end

subsection Problem dependent parameters
  set K reg				= 0*h
  set Eps reg				= 4*h
  # must be 0.0 in active set
  set Gamma penalization		= 0.0

  # Material and problem-rhs parameters
  set Pressure				= 0.0
  set Fracture toughness G_c		= 2.7
  set Poisson ratio nu			= 0.2
  set E modulus	    			= 1.0
  set Lame mu				= 80.77e+3
  set Lame lambda			= 121.15e+3	  

end 

subsection Solver parameters
  set Use Direct Inner Solver              = false
  set Newton lower bound     		   = 1.0e-6
  set Newton maximum steps		   = 50
  set Upper Newton rho			   = 0.999
  set Line search maximum steps		   = 10
  set Line search damping 		   = 0.6


end