From c94efdce83e54c99547c0a98ceb7bc6c3a4452e9 Mon Sep 17 00:00:00 2001 From: darkdrgn2k Date: Fri, 22 Mar 2019 22:44:33 -0400 Subject: [PATCH] Corrected incorrect faq link --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 24ed643f1..16e78faf9 100644 --- a/README.md +++ b/README.md @@ -4,7 +4,7 @@ The following instructions will help you set up an encrypted mesh network on Raspberry Pi's. It takes about 15 minutes to set up a node with the Pi 3. Obviously, to have a mesh you will need more than one node. -Many board that run [Armbian](https://www.armbian.com/) such as many models of Orange Pi hardware are also supported. The same installation steps can be followed, except you would flash the SD card with Armbian instead of Raspbian. See [Hardware Table](#hardware-table) for the full list of supported hardware and check for board specific installation details in our [Frequently Asked Questions](./FAQ.md). +Many board that run [Armbian](https://www.armbian.com/) such as many models of Orange Pi hardware are also supported. The same installation steps can be followed, except you would flash the SD card with Armbian instead of Raspbian. See [Hardware Table](#hardware-table) for the full list of supported hardware and check for board specific installation details in our [Frequently Asked Questions](./docs/FAQ.md). ## Set Up