Python cross-platform script to upload firmware via the serial boot loader onto the CC13xx, CC2538 and CC26xx SoC.

ZigStar LAN Gateway - Firmware

rainy - a tiny tool for iot data collection and monitoring

This is a sample iOS application for connecting SensorTag (CC2650) to iOS devices via BLE

A tightly integrated CC2650 and SX1276 radio

Sensors and actuators software for TI's CC2640 / CC2650 BLE SoC

Raspberry Pi wireless weather station with TI SensorTag CC2650 connected via Bluetooth Low Energy.

TI CC2650 Launchpad based BLE Clicker

Conversion script to allow building CC2650 code on linux

MSP432 interfacing withe GPRS and GPS

a java library for using TI SensorTag CC2650 by bluez-dbus with BlueZ

A command line and scriptable interface to the TI CC2538/CC26xx Serial Bootloader

J-Link script file to perform full chip erase of the TI CC13x0/CC26x0 devices

The Firmware for the LoRaBUG RGBW Strip Controller with LoRaWAN integration

A low level interface library to the TI CC2538/CC26xx Serial Bootloader

Example of getting serial input from the cc26xx. Code was tested using the TI Launchpad CC2650.

iOS app for collecting data (gyroscope, magnetometer, accelerometer) from SensorTag 2.0 (CC2650).

CC2650 SimpleLink SensorTag board support package for Energia IDE

Serverless IoT solution for real time firefighter team status and location monitoring and on body sensor visualization.

Cross-platfrom embedded toolchain support with using cmake for TI CC Series Microcontrollers (MCUs) & processors