Electronic device for wrist rehabilitation

A documentation automation system for SaMD and medical device software. Documentation-as-code for ISO62304 compliant development processes.

This project creates a simple electrospinning syringe pump that incorporates an Arduino and motor.

Wearable Transcranial Magnetic Stimulation (TMS) for Alzheimer's Disease

This repository contains the code and documents for my master’s thesis “Assessment of the accuracy and reliability of heart rate and blood oxygen saturation measurement in wearable devices". The thesis was written by Antoni López under the supervision of Juan José Ramos Castro at the Polytechnic University of Catalonia.

Source for the controller interface for BiVAD project on the BeagleBone Black. This repository will contain testing programs and any other peripheral functionality required by testing or updated by Customer Requirements.

🏆 BrickHack 2020 Winner: NFC patient bracelet and scanner system for first responders. Provides EMS with instant access to crucial patient information.

Patients with chronic pain or other neurologic conditions frequently note that their symptoms vary with environmental conditions. This includes heat and light but also, body position and level of activity. It would be useful for the patient and their physician to know how these factors their main symptoms such as pain, fatigue, or weakness.

This project creates a simple urinary catheter that incorporates a distance sensor and water sensor.

Emergency Ventilator-Sharing System. A system using standard ventilation circuit parts and localy-manufacturable custom components to allow the use of a single ventilator to support two patients with independent control of tidal volume, FiO2, and PEEP for each patient.

My undergraduate honours project on paper-based microfluidics for animal disease detection

Designing, building and controlling a motorized prosthetic arm

BMEN 3310 (Engineering Measurements from Human Systems): Takes in data from an external hall sensor that reads each time the Minimally Invasive Monocusp Valve open and closes, and preforms calculations to determine the state of the patient.

Vue / Vue Formulate-Validation, wrapped in 11ty and webhooks to API CRUD managers and live update CRM tool workflow

Smart Wearable Device for Reduction of Parkinson’s Disease Hand-Tremor

This project was completed in 2018 as a part of my postgraduate studies in Biomedical Engineering

This project was completed in 2018 as a part of my postgraduate studies in Biomedical Engineering

Implementation of a PulseOximeter system on embedded platform STM32

Automated Reactive Accelerated Aging for Rapid In Vitro Evaluation of Neural Implants Performance

The objective of our project is to use electromyography (EMG) in order to classify different hand gestures. EMG is a technique for evaluating and recording the electrical activity produced skeletal muscles. We used double channel surface electrodes to record EMG, with 3 electrodes per channel, one for ground and 2 for the differential input. We …