From b1276c48e91bee869454301d3678cc49d8f57ab4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 29 Apr 2015 10:58:03 +0200 Subject: [PATCH] x86/fpu: Initialize fpregs in fpu__init_cpu_generic() FPU fpregs do not get initialized during bootup on secondary CPUs, on non-xsave capable CPUs. For example on one of my systems, the secondary CPU has this FPU state on bootup: x86: Booting SMP configuration: .... node #0, CPUs: #1 x86/fpu ###################### x86/fpu # FPU register dump on CPU#1: x86/fpu # ... CWD: ffff0040 x86/fpu # ... SWD: ffff0000 x86/fpu # ... TWD: ffff555a x86/fpu # ... FIP: 00000000 x86/fpu # ... FCS: 00000000 x86/fpu # ... FOO: 00000000 x86/fpu # ... FOS: ffff0000 x86/fpu # ... FP0: 02 57 00 00 00 00 00 00 ff ff x86/fpu # ... FP1: 1b e2 00 00 00 00 00 00 ff ff x86/fpu # ... FP2: 00 00 00 00 00 00 00 00 00 00 x86/fpu # ... FP3: 00 00 00 00 00 00 00 00 00 00 x86/fpu # ... FP4: 00 00 00 00 00 00 00 00 00 00 x86/fpu # ... FP5: 00 00 00 00 00 00 00 00 00 00 x86/fpu # ... FP6: 00 00 00 00 00 00 00 00 00 00 x86/fpu # ... FP7: 00 00 00 00 00 00 00 00 00 00 x86/fpu # ... SW: dadadada x86/fpu ###################### Note how CWD and TWD are off their usual init state (0x037f and 0xffff), and how FP0 and FP1 has non-zero content. This is normally not a problem, because any user-space FPU state is initalized properly - but it can complicate the use of FPU instructions in kernel code via kernel_fpu_begin()/end(): if the FPU using code does not initialize registers itself, it might generate spurious exceptions depending on which CPU it executes on. Fix this by initializing the x87 state via the FNINIT instruction. Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar --- arch/x86/kernel/fpu/init.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c index 460e7e2c618674..72219ce2385a25 100644 --- a/arch/x86/kernel/fpu/init.c +++ b/arch/x86/kernel/fpu/init.c @@ -36,6 +36,9 @@ static void fpu__init_cpu_generic(void) if (!cpu_has_fpu) cr0 |= X86_CR0_EM; write_cr0(cr0); + + /* Flush out any pending x87 state: */ + asm volatile ("fninit"); } /*