This repository contains some of my personally developed OpenJSCAD models and libraries.
Note that the libraries are usually expected to be deployed on an server that
hosts an OpenJSCAD instance. On my setups I simply deploy
the content of the library folder to the /openjscad.jscad/. In this
case any library can be used by simply using an include directive at the
top of the model script.
- Electronics
- A template for the Raspberry Pi B+ to be used during case builds or in cases on wants to embed an Raspberry Pi into a custom project
- A template for the HY86N forked light barrier
- Mechanics
- Generator for 4 digit NACA airfoils
- A gear generator for involute gears
- A generator for metric screw and nut templates (without threads)
- Simple screwed clamps for rods and wires
- A template for the SG90 servo
- A template for the 28BYJ_48 stepper
- A template for NEMA 17 steppers
- Bearings templates
- A template for aluminium profiles
- 20x20, B-type or multiples with 6mm nut
- Templates for Motedis Delrin AntiBacklash Nuts
- Templates and models for SMA.. and SMA..L bearing blocks housing typical LM..UU and LM..LUU bearings (usually made out of aluminum)
- Templates for CF vacuum flanges (as specified by ISO3669)
- Packaging
- A simple box generator with rounded edges
- Toys
- A generator for LEGO compatible parts to allow attachment of the common bricks to 3D printed parts (note that they can never replace real parts due to the hackisch way of attachment)
- Chemistry
- A simple gas bubbler
- Parameterized test tube holder
- Simple peristaltic pump based on the 28BYJ_48 stepper motor
- Education
- A dice to allow rolling for decliations
- 3D printer accessory
- Holder for 3D printer spools
- Toy components
- Physics
- Hacked screw based mini cross table
- Simple PLA screw clamps for vacuum tubes
- A small MiniECM project