example_toshiba_ctrl.yaml

external_components:
  - source:
      type: local
      path: components
    components: [ToshibaUART]

ToshibaUART:
  update_interval: 20s
  id: toshibauart

binary_sensor:
  - platform: ToshibaUART
    pump_onoff:
      name: "Toshiba Pump On/Off"
      id: pump_onoff
    heat_pump_heating:
      id: heat_pump_heating
      name: "Heat Pumping"
    heat_resistor_heating:
      id: heat_resistor_heating
      name: "Heating with Coil"
    hotwater_pump_heating:
      id: hotwater_pump_heating
      name: "Hotwater heat pumping"
    hotwater_resistor_heating:
      id: hotwater_resistor_heating
      name: "Hotwater Coil heating"

sensor:
  - platform: ToshibaUART
    zone1_water_temp:
      name: "Zone 1 water temperature"
      id: zone1_water_temp
    outside_air_temp:
      name: "Toshiba - Outdoor ambient temperature"
      id: outside_air_temp
    oudoor_unit_current:
      name: "Toshiba - Outdoor unit current"
      id: oudoor_unit_current
    heating_compressor_uptime:
      name: "Toshiba - Heating compressor uptime"
      id: heating_compressor_uptime

number:
  - platform: ToshibaUART
    zone1_target_temp:
      name: "Zone 1 target temperature"
      mode: box
    hotwater_target_temp:
      name: "Hotwater target temperature"
      mode: box


switch:
  - platform: ToshibaUART
    zone1_switch:
      name: "Toshiba - Zone 1"
    hotwater_switch:
      name: "Toshiba - Hotwater"
    auto_mode_switch:
      name: "Toshiba - Auto Mode"

uart:
  id: uart_bus
  tx_pin: 
    number: D8
    inverted: False
  rx_pin: 
    number: D7
    inverted: False
  baud_rate: 2400
  rx_buffer_size: 2048
  stop_bits: 1
  parity: NONE
#  debug:
#    direction: BOTH
#    dummy_receiver: true