You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Following is a mockup of a review page for 1 test from the horizontal slider test plan. This mockup is based on the new V2 test format designed in #974.
The top section of the mockup includes a set of radios that enable filtering of tests for each covered AT and the open test page button, neither of which will render correctly in a GitHub comment. You can see those elements of the mockup in this zip of the HTML: horizontal-slider-TestPlanReviewMockup.zip
Note that every assertion is shown with two different wordings -- an assertion statement and an assertion phrase. This is to improve understandability of content in different contexts:
Assertion statement is for checkbox labels in the test runner.
Assertion phrase is a shorter form used in reports.
Activate the "Open test page" button, which opens the example to test in a new window and sets focus on the "Run Test Setup" button.
Activate the "Run Test Setup" button, which runs a script that sets focus on a link before the Red slider.
Starting at the 'Navigate forwards from here' link, navigate to the 'Red' slider.
Do this with each of the following commands or command sequences.
If any settings are specified in parenthesies, ensure the settings are active before executing the command or command sequence.
Down Arrow then Down Arrow (Virtual Cursor Active)
Tab (Virtual Cursor Active)
Tab (PC Cursor Active)
After performing each command or command sequence listed above, complete the section of the below results form for that command or command sequence.
IMPORTANT!Before performing the test with the next command or command sequence:
Refresh the test page.
Activate the "Run Test Setup" button.
Ensure any settings specified for the next command or command sequence are active.
To perform a command with virtual cursor active:
Press Alt+Delete to determine which cursor is active.
If the PC cursor is active, press Escape to activate the virtual cursor.
To perform a command with PC cursor active:
Press Alt+Delete to determine which cursor is active.
If the virtual cursor is active, press Insert+z to disable the virtual cursor.
Down Arrow then Down Arrow (virtual cursor active): 3 MUST, 3 SHOULD, AND 0 MAY assertions
Priority
Assertion Phrase
Assertion Statement
MUST
convey role 'slider'
Role 'slider' is conveyed
MUST
convey name 'Red'
Name 'Red' is conveyed
MUST
convey value '128'
Value '128' is conveyed
SHOULD
convey Orientation 'horizontal'
Orientation 'horizontal' is conveyed
SHOULD
convey minimum value '0'
Minimum value '0' is conveyed
SHOULD
convey maximum value '255'
Maximum value '255' is conveyed
Tab (virtual cursor active): 3 MUST, 4 SHOULD, AND 0 MAY assertions
Priority
Assertion Phrase
Assertion Statement
MUST
convey role 'slider'
Role 'slider' is conveyed
MUST
convey name 'Red'
Name 'Red' is conveyed
MUST
convey value '128'
Value '128' is conveyed
SHOULD
convey Orientation 'horizontal'
Orientation 'horizontal' is conveyed
SHOULD
convey minimum value '0'
Minimum value '0' is conveyed
SHOULD
convey maximum value '255'
Maximum value '255' is conveyed
SHOULD
Switch from virtual cursor active to PC cursor active
JAWS switches from virtual cursor active to PC cursor active
Tab (PC cursor active): 3 MUST, 3 SHOULD, AND 0 MAY assertions
Activate the "Open test page" button, which opens the example to test in a new window and sets focus on the "Run Test Setup" button.
Activate the "Run Test Setup" button, which runs a script that sets focus on a link before the Red slider.
Starting at the 'Navigate forwards from here' link, navigate to the 'Red' slider.
Do this with each of the following commands or command sequences.
If any settings are specified in parenthesies, ensure the settings are active before executing the command or command sequence.
Down Arrow then Down Arrow (browse mode on)
Tab (browse mode on)
Tab (focus mode on)
After performing each command or command sequence listed above, complete the section of the below results form for that command or command sequence.
IMPORTANT!Before performing the test with the next command or command sequence:
Refresh the test page.
Activate the "Run Test Setup" button.
Ensure any settings specified for the next command or command sequence are active.
To perform a command with browse mode on:
Press insert+Space.
If NVDA made the focus mode sound , press Insert+Space again to turn browse mode back on.
To perform a command with focus mode on:
Press insert+Space.
If NVDA made the browse mode sound , press Insert+Space again to turn focus mode back on.
Down Arrow then Down Arrow (browse mode on): 3 MUST, 3 SHOULD, AND 0 MAY assertions
Priority
Assertion Phrase
Assertion Statement
MUST
convey role 'slider'
Role 'slider' is conveyed
MUST
convey name 'Red'
Name 'Red' is conveyed
MUST
convey value '128'
Value '128' is conveyed
SHOULD
convey Orientation 'horizontal'
Orientation 'horizontal' is conveyed
SHOULD
convey minimum value '0'
Minimum value '0' is conveyed
SHOULD
convey maximum value '255'
Maximum value '255' is conveyed
Tab (browse mode on): 3 MUST, 4 SHOULD, AND 0 MAY assertions
Priority
Assertion Phrase
Assertion Statement
MUST
convey role 'slider'
Role 'slider' is conveyed
MUST
convey name 'Red'
Name 'Red' is conveyed
MUST
convey value '128'
Value '128' is conveyed
SHOULD
convey Orientation 'horizontal'
Orientation 'horizontal' is conveyed
SHOULD
convey minimum value '0'
Minimum value '0' is conveyed
SHOULD
convey maximum value '255'
Maximum value '255' is conveyed
SHOULD
Switch from browse mode on to focus mode on
NVDA switches from browse mode on to focus mode on
Tab (focus mode on): 3 MUST, 3 SHOULD, AND 0 MAY assertions
Activate the "Open test page" button, which opens the example to test in a new window and sets focus on the "Run Test Setup" button.
Activate the "Run Test Setup" button, which runs a script that sets focus on a link before the Red slider.
Starting at the 'Navigate forwards from here' link, navigate to the 'Red' slider.
Do this with each of the following commands or command sequences.
If any settings are specified in parenthesies, ensure the settings are active before executing the command or command sequence.
Control + Option + Right Arrow then Control + Option + Right Arrow
Tab
J (quick nav on)
After performing each command or command sequence listed above, complete the section of the below results form for that command or command sequence.
IMPORTANT!Before performing the test with the next command or command sequence:
Refresh the test page.
Activate the "Run Test Setup" button.
Ensure any settings specified for the next command or command sequence are active.
To perform a command with quick nav on:
Simultaneously press left and right arrow keys.
If VoiceOver said 'quick nav off', press the left and right arrow keys again to turn it back on.
Control + Option + Right Arrow then Control + Option + Right Arrow: 3 MUST, 3 SHOULD, AND 0 MAY assertions
Priority
Assertion Phrase
Assertion Statement
MUST
convey role 'slider'
Role 'slider' is conveyed
MUST
convey name 'Red'
Name 'Red' is conveyed
MUST
convey value '128'
Value '128' is conveyed
SHOULD
convey Orientation 'horizontal'
Orientation 'horizontal' is conveyed
SHOULD
convey minimum value '0'
Minimum value '0' is conveyed
SHOULD
convey maximum value '255'
Maximum value '255' is conveyed
Tab: 3 MUST, 3 SHOULD, AND 0 MAY assertions
Priority
Assertion Phrase
Assertion Statement
MUST
convey role 'slider'
Role 'slider' is conveyed
MUST
convey name 'Red'
Name 'Red' is conveyed
MUST
convey value '128'
Value '128' is conveyed
SHOULD
convey Orientation 'horizontal'
Orientation 'horizontal' is conveyed
SHOULD
convey minimum value '0'
Minimum value '0' is conveyed
SHOULD
convey maximum value '255'
Maximum value '255' is conveyed
J (quick nav on): 3 MUST, 3 SHOULD, AND 0 MAY assertions
Priority
Assertion Phrase
Assertion Statement
MUST
convey role 'slider'
Role 'slider' is conveyed
MUST
convey name 'Red'
Name 'Red' is conveyed
MUST
convey value '128'
Value '128' is conveyed
SHOULD
convey Orientation 'horizontal'
Orientation 'horizontal' is conveyed
SHOULD
convey minimum value '0'
Minimum value '0' is conveyed
SHOULD
convey maximum value '255'
Maximum value '255' is conveyed
The text was updated successfully, but these errors were encountered:
The above mockup and attached zip now reflect your suggestions from today's meeting:
I added 3 steps to instructions. One before the test task and 2 after. they now include more complete information about initial setup and refreshing the browser when repeating the test for each command.
The command settings instructions are in details/summary elements.
The assertion phrases start with lower case.
If this looks good, I will update the spec in #977.
For discussion in August 16, 2023 meeting.
Following is a mockup of a review page for 1 test from the horizontal slider test plan. This mockup is based on the new V2 test format designed in #974.
The top section of the mockup includes a set of radios that enable filtering of tests for each covered AT and the open test page button, neither of which will render correctly in a GitHub comment. You can see those elements of the mockup in this zip of the HTML:
horizontal-slider-TestPlanReviewMockup.zip
Note that every assertion is shown with two different wordings -- an assertion statement and an assertion phrase. This is to improve understandability of content in different contexts:
A report mockup is available in w3c/aria-at-app#744.
Here is the mockup content.
Color Viewer Test plan (9 tests)
Filter tests by covered assistive technology All assistive technologies JAWS NVDA VoiceOver for macOSSupporting Documentation
Test 1: Navigate forwards to a slider
Tested ARIA features:
Open
Test 1 Page
JAWS
Instructions
To perform a command with virtual cursor active:
To perform a command with PC cursor active:
Down Arrow then Down Arrow (virtual cursor active): 3 MUST, 3 SHOULD, AND 0 MAY assertions
Tab (virtual cursor active): 3 MUST, 4 SHOULD, AND 0 MAY assertions
Tab (PC cursor active): 3 MUST, 3 SHOULD, AND 0 MAY assertions
NVDA
Instructions
To perform a command with browse mode on:
To perform a command with focus mode on:
Down Arrow then Down Arrow (browse mode on): 3 MUST, 3 SHOULD, AND 0 MAY assertions
Tab (browse mode on): 3 MUST, 4 SHOULD, AND 0 MAY assertions
Tab (focus mode on): 3 MUST, 3 SHOULD, AND 0 MAY assertions
VoiceOver for macOS
Instructions
To perform a command with quick nav on:
Control + Option + Right Arrow then Control + Option + Right Arrow: 3 MUST, 3 SHOULD, AND 0 MAY assertions
Tab: 3 MUST, 3 SHOULD, AND 0 MAY assertions
J (quick nav on): 3 MUST, 3 SHOULD, AND 0 MAY assertions
The text was updated successfully, but these errors were encountered: