Command line bitcoin wallet written in python script based on Mixin Network

This a command line bitcoin/altcoin wallet written in python script based on Mixin Network.

Full Mixin network resource index

Python 3 installation:

This tool is written in Python 3.7.2 So you need to install Python 3.7.2 or above.

macOS

brew upgrade
brew install python@3

Ubuntu, install python 3.7.2 from the third apt source.

sudo apt update
sudo apt install software-properties-common
sudo add-apt-repository ppa:deadsnakes/ppa

When prompt like below, press Enter to continue:

Press [ENTER] to continue or Ctrl-c to cancel adding it.

Update the source, then install python3.7, python3.7-venv

sudo apt update
sudo apt install python3.7 python3.7-venv
sudo ln -s /usr/bin/python3.7 /usr/bin/python3

check both python3 and python3-venv are installed

$ python3 -V
Python 3.7.2

root@n2:~ python3 -m venv -h
usage: venv [-h] [--system-site-packages] [--symlinks | --copies] [--clear]
            [--upgrade] [--without-pip] [--prompt PROMPT]
            ENV_DIR [ENV_DIR ...]
Creates virtual Python environments in one or more target directories.
positional arguments:
  ENV_DIR               A directory to create the environment in.

optional arguments:
  -h, --help            show this help message and exit
  --system-site-packages
                        Give the virtual environment access to the system
                        site-packages dir.
  --symlinks            Try to use symlinks rather than copies, when symlinks
                        are not the default for the platform.
  --copies              Try to use copies rather than symlinks, even when
                        symlinks are the default for the platform.
  --clear               Delete the contents of the environment directory if it
                        already exists, before environment creation.
  --upgrade             Upgrade the environment directory to use this version
                        of Python, assuming Python has been upgraded in-place.
  --without-pip         Skips installing or upgrading pip in the virtual
                        environment (pip is bootstrapped by default)
  --prompt PROMPT       Provides an alternative prompt prefix for this
                        environment.

Once an environment has been created, you may wish to activate it, e.g. by
sourcing an activate script in its bin directory

Create mixin_labs-python-bot project

You need create project directory, make it as a python's “virtual environment”, and install the required packages.

git clone https://github.com/myrual/mixin_labs-python-bot
cd mixin_labs-python-bot
python3 -m venv ./

Run python3 -m venv , following file and folder are created:

wenewzha:mixin_labs-python-bot wenewzhang$ ls
bin		include		lib		pyvenv.cfg

Once a virtual environment has been created, it can be “activated” using a script in the virtual environment’s binary directory.

wenewzha:mixin_labs-python-bot wenewzhang$ source ./bin/activate
(mixin_labs-python-bot) wenewzha:mixin_labs-python-bot wenewzhang$

So that “python” or "pip" invoke from the virtual environment, and you can run installed scripts without having to use their full path.

Install required packages by "virtual environment"

Create the requirement list.

requirements.txt

cryptography==2.4.2
pycparser==2.19
pycryptodome==3.7.2
PyJWT==1.7.1
python-dateutil==2.7.5
PyYAML==3.13
requests==2.21.0
websocket-client==0.54.0

Use pip to upgrade pip itself, and install required packages.

pip install --upgrade pip
pip install -r requirements.txt

Download the mixin-network api.

wget https://github.com/wenewzhang/mixin-python3-sdk/raw/master/mixin_ws_api.py
wget https://github.com/wenewzhang/mixin-python3-sdk/raw/master/mixin_api.py
wget https://github.com/wenewzhang/mixin-python3-sdk/raw/master/mixin_config.py

Hello, world in Python

Create your first app in Mixin Network developer dashboard

You need to create an app in dashboard. This tutorial can help you.

Generate parameter of your app in dashboard

After app is created in dashboard, you still need to generate parameter and write down required content, these content will be written into mixin_config.py file.

In the folder, create a file: mixin_config.py. Copy the following content into it.

mixin_config.py

client_id= 'ed882a39-0b0c-4413-bbd9-221cdeee56bf'
client_secret = '8d7ec7b9c8261b6c7bd6309210496ca4b72bce9efc7e49be14a428ce49ff7202'


pay_pin = '599509'
pay_session_id = 'bd53b6a4-e79a-49e5-ad04-36da518354f6'
pin_token = "nVREh0/Ys9vzNFCQT2+PKcDN2OYAUSH8CidwHqDQLOCvokE7o6wtvLypjW9iks/RsnBM6N4SPF/P3bBW254YHGuDZXhitDEWOGkXs7v8BxMQxf+9454qTkMSpR9xbjAzgMXnSyHrNVoBtsc/Y+NvemB3VxPfsCOFHasiMqAa5DU="


private_key = """-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----"""

Replace the value with content generated in dashboard. Create an app-mini.py file, fill it by the content below:

app-mini.py

from mixin_ws_api import MIXIN_WS_API
from mixin_api import MIXIN_API
import mixin_config

import json
import time
from io import BytesIO
import base64
import gzip

try:
    import thread
except ImportError:
    import _thread as thread


def on_message(ws, message):
    inbuffer = BytesIO(message)

    f = gzip.GzipFile(mode="rb", fileobj=inbuffer)
    rdata_injson = f.read()
    rdata_obj = json.loads(rdata_injson)
    print("-------json object begin---------")
    print(rdata_obj)
    print("-------json object end---------")
    action = rdata_obj["action"]

    if rdata_obj["data"] is not None:
        print("data in message:",rdata_obj["data"])

    if rdata_obj["data"] is not None and rdata_obj["data"]["category"] is not None:
        print(rdata_obj["data"]["category"])

    if action == "CREATE_MESSAGE":

        data = rdata_obj["data"]
        msgid = data["message_id"]
        typeindata = data["type"]
        categoryindata = data["category"]
        userId = data["user_id"]
        conversationId = data["conversation_id"]
        dataindata = data["data"]

        realData = base64.b64decode(dataindata)

        MIXIN_WS_API.replayMessage(ws, msgid)

        if 'error' in rdata_obj:
            return

        if categoryindata == "PLAIN_TEXT":
            realData = realData.decode('utf-8')
            print("dataindata",realData)
            MIXIN_WS_API.sendUserText(ws, conversationId, userId, realData)


if __name__ == "__main__":

    # mixin_api = MIXIN_API(mixin_config)
    while True:
        mixin_ws = MIXIN_WS_API(on_message=on_message)
        mixin_ws.run()

Run the app-mini.py, DO NOT forget active the python "virtual environment" before!"

cd mixin_labs-python-bot
wenewzha:mixin_labs-python-bot wenewzhang$ source ./bin/activate

(mixin_labs-python-bot) wenewzha:mixin_labs-python-bot wenewzhang$ python app-mini.py
...

If console output following message, congratulations.

(mixin_labs-python-bot) wenewzha:mixin_labs-python-bot wenewzhang$ python app-mini.py
ws open
-------json object begin---------
{'id': '1c798948-30eb-11e9-a20e-20c9d08850cd', 'action': 'LIST_PENDING_MESSAGES'}
-------json object end---------

Add the bot(for example, this bot id is 7000101639) as your friend in Mixin Messenger and send your messages.

Source code explanation

The code creates a websocket client.

if __name__ == "__main__":

    # mixin_api = MIXIN_API(mixin_config)
    while True:
        mixin_ws = MIXIN_WS_API(on_message=on_message)
        mixin_ws.run()

Send a READ operation message to the server let it knows this message has been read. The bot will receive the duplicated message when the bot connected to server again if bot don't send response.

        MIXIN_WS_API.replayMessage(ws, msgid)

The bot echo every text from user

if categoryindata == "PLAIN_TEXT":
    realData = realData.decode('utf-8')
    print("dataindata",realData)
    MIXIN_WS_API.sendUserText(ws, conversationId, userId, realData)    

Not only texts, images and other type message will be pushed to your bot. You can find more details about Messenger message.

End

Now your bot worked. You can hack it.

Full code is here